summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-07-15scsi: sd_zbc: Remove unused inline functionsYueHaibing1-6/+0
These are no longer used and can be removed. Link: https://lore.kernel.org/r/20200715025523.34620-1-yuehaibing@huawei.com Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: lpfc: NVMe remote port devloss_tmo from llddJames Smart1-0/+5
nvme-fc allows the driver to specify a default devloss_tmo value when registering the remote port. The lpfc driver is currently not doing so, although it is implementing a driver internal node loss value of 30s which also is used on the SCSI FC remote port. As no devloss_tmo is set, the nvme-fc transport defaults to 60s. So there are competing timers. Additionally, due to the competing timers, it is possible the NVMe rport is removed but the SCSI rport remains. It is possible that the SCSI FC rport, which was registered for the NVMe port even if it doesn't utilize the SCSI protocol, had been tuned to not match either the 60s (nvme-fc default) or 30s (lldd default), it gets out of whack. The lldd will defer to the SCSI FC rport as long as the SCSI FC rport has not had its devloss_tmo expire. Correct the situation by specifying a default devloss_tmo to the nvme-fc transport when registering the rport. Take the value from the SCSI FC rport if it exists, otherwise use the driver default. Link: https://lore.kernel.org/r/20200714211412.11773-1-jsmart2021@gmail.com Tested-by: Martin George <Martin.George@netapp.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: cxgb4i: Remove an unnecessary NULL check for 'cconn' pointerVarun Prakash1-1/+1
'cconn' will never be NULL in cxgbi_conn_alloc_pdu() so remove NULL check. Link: https://lore.kernel.org/r/1594741751-3323-1-git-send-email-varun@chelsio.com Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: lpfc: Quieten some printksAnton Blanchard1-4/+4
On a big box the lpfc driver emits a few thousand "Set Affinity" lines to the console. Reduce the priority of these from KERN_ERR to KERN_INFO, and also fix a few printks that had no log level. Link: https://lore.kernel.org/r/20200713083908.1104927-1-anton@ozlabs.org Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Anton Blanchard <anton@ozlabs.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: qla4xxx: Provide a missing function param description and fix formattingLee Jones1-3/+4
Kerneldoc function parameter references need to be in the format '@.*: ', else the kerneldoc checker gets confused. Fixes the following W=1 kernel build warning(s): drivers/scsi/qla4xxx/ql4_init.c: In function ‘ql4xxx_set_mac_number’: drivers/scsi/qla4xxx/ql4_init.c:17:10: warning: variable ‘func_number’ set but not used [-Wunused-but-set-variable] drivers/scsi/qla4xxx/ql4_init.c: In function ‘qla4xxx_pci_config’: drivers/scsi/qla4xxx/ql4_init.c:664:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] from drivers/scsi/qla4xxx/ql4_init.c:9: from drivers/scsi/qla4xxx/ql4_init.c:9: drivers/scsi/qla4xxx/ql4_init.c:953: warning: Function parameter or member 'is_reset' not described in 'qla4xxx_initialize_adapter' drivers/scsi/qla4xxx/ql4_init.c:1168: warning: Function parameter or member 'ha' not described in 'qla4xxx_process_ddb_changed' drivers/scsi/qla4xxx/ql4_init.c:1168: warning: Function parameter or member 'fw_ddb_index' not described in 'qla4xxx_process_ddb_changed' drivers/scsi/qla4xxx/ql4_init.c:1168: warning: Function parameter or member 'state' not described in 'qla4xxx_process_ddb_changed' drivers/scsi/qla4xxx/ql4_init.c:1168: warning: Function parameter or member 'conn_err' not described in 'qla4xxx_process_ddb_changed' Link: https://lore.kernel.org/r/20200713074645.126138-30-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aacraid: Fix a bunch of function doc formatting errorsLee Jones1-14/+3
And a few missing/excessive parameter descriptions. Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/aachba.c:358: warning: Function parameter or member 'dev' not described in 'aac_get_config_status' drivers/scsi/aacraid/aachba.c:358: warning: Function parameter or member 'commit_flag' not described in 'aac_get_config_status' drivers/scsi/aacraid/aachba.c:358: warning: Excess function parameter 'common' description in 'aac_get_config_status' drivers/scsi/aacraid/aachba.c:450: warning: Function parameter or member 'dev' not described in 'aac_get_containers' drivers/scsi/aacraid/aachba.c:450: warning: Excess function parameter 'common' description in 'aac_get_containers' drivers/scsi/aacraid/aachba.c:568: warning: Function parameter or member 'scsicmd' not described in 'aac_get_container_name' drivers/scsi/aacraid/aachba.c:796: warning: Function parameter or member 'scsicmd' not described in 'aac_probe_container_callback1' drivers/scsi/aacraid/aachba.c:796: warning: Excess function parameter 'dev' description in 'aac_probe_container_callback1' drivers/scsi/aacraid/aachba.c:796: warning: Excess function parameter 'cid' description in 'aac_probe_container_callback1' drivers/scsi/aacraid/aachba.c:1105: warning: Function parameter or member 'scsicmd' not described in 'aac_get_container_serial' drivers/scsi/aacraid/aachba.c:1961: warning: Excess function parameter 'phys_luns' description in 'aac_set_safw_attr_all_targets' drivers/scsi/aacraid/aachba.c:1961: warning: Excess function parameter 'rescan' description in 'aac_set_safw_attr_all_targets' drivers/scsi/aacraid/aachba.c:3394: warning: Cannot understand * on line 3394 - I thought it was a doc line drivers/scsi/aacraid/aachba.c:3687: warning: Cannot understand * on line 3687 - I thought it was a doc line drivers/scsi/aacraid/aachba.c:3752: warning: Cannot understand * on line 3752 - I thought it was a doc line drivers/scsi/aacraid/aachba.c:3795: warning: Cannot understand * on line 3795 - I thought it was a doc line Link: https://lore.kernel.org/r/20200713074645.126138-29-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aic94xx: Repair kerneldoc formatting error and remove extra paramLee Jones1-2/+1
Function parameters need to be documented with format '@.*: '. 'to' is not longer asd_start_timers()'s function parameter. Fixes the following W=1 kernel build warning(s): drivers/scsi/aic94xx/aic94xx_hwi.c:589: warning: Function parameter or member 'asd_ha' not described in 'asd_init_ctxmem' drivers/scsi/aic94xx/aic94xx_hwi.c:1157: warning: Excess function parameter 'to' description in 'asd_start_scb_timers' Link: https://lore.kernel.org/r/20200713074645.126138-28-lee.jones@linaro.org Cc: Luben Tuikov <luben_tuikov@adaptec.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: pm8001: Demote obvious misuse of kerneldoc and update othersLee Jones1-15/+15
More bitrot issues with function documentation not keeping up with API changes. Fixes the following W=1 kernel build warning(s): drivers/scsi/pm8001/pm8001_init.c:64: warning: cannot understand function prototype: 'const struct pm8001_chip_info pm8001_chips[] = ' drivers/scsi/pm8001/pm8001_init.c:86: warning: cannot understand function prototype: 'struct scsi_host_template pm8001_sht = ' drivers/scsi/pm8001/pm8001_init.c:115: warning: cannot understand function prototype: 'struct sas_domain_function_template pm8001_transport_ops = ' drivers/scsi/pm8001/pm8001_init.c:212: warning: Function parameter or member 'irq' not described in 'pm8001_interrupt_handler_msix' drivers/scsi/pm8001/pm8001_init.c:237: warning: Function parameter or member 'irq' not described in 'pm8001_interrupt_handler_intx' drivers/scsi/pm8001/pm8001_init.c:265: warning: Function parameter or member 'ent' not described in 'pm8001_alloc' drivers/scsi/pm8001/pm8001_init.c:624: warning: Function parameter or member 'pm8001_ha' not described in 'pm8001_init_sas_add' drivers/scsi/pm8001/pm8001_init.c:624: warning: Excess function parameter 'chip_info' description in 'pm8001_init_sas_add' drivers/scsi/pm8001/pm8001_init.c:900: warning: Function parameter or member 'pm8001_ha' not described in 'pm8001_setup_msix' drivers/scsi/pm8001/pm8001_init.c:900: warning: Excess function parameter 'chip_info' description in 'pm8001_setup_msix' drivers/scsi/pm8001/pm8001_init.c:900: warning: Excess function parameter 'irq_handler' description in 'pm8001_setup_msix' drivers/scsi/pm8001/pm8001_init.c:981: warning: Function parameter or member 'pm8001_ha' not described in 'pm8001_request_irq' drivers/scsi/pm8001/pm8001_init.c:981: warning: Excess function parameter 'chip_info' description in 'pm8001_request_irq' Link: https://lore.kernel.org/r/20200713074645.126138-27-lee.jones@linaro.org Cc: Kumar Santhanam <AnandKumar.Santhanam@pmcs.com> Cc: Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com> Cc: Nikith Ganigarakoppal <Nikith.Ganigarakoppal@pmcs.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aic94xx: Demote seemingly unintentional kerneldoc headerLee Jones1-1/+1
This is the only use of kerneldoc in the sourcefile and no descriptions are provided. Fixes the following W=1 kernel build warning(s): drivers/scsi/aic94xx/aic94xx_init.c:538: warning: Function parameter or member 'asd_ha' not described in 'asd_free_edbs' Link: https://lore.kernel.org/r/20200713074645.126138-26-lee.jones@linaro.org Cc: YueHaibing <yuehaibing@huawei.com> Cc: Luben Tuikov <luben_tuikov@adaptec.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aacraid: Fix a couple of small kerneldoc issuesLee Jones1-2/+1
Most likely caused by bitrot (docs not keeping in sync with API). Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/linit.c: In function ‘aac_biosparm’: drivers/scsi/aacraid/linit.c:368:41: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] drivers/scsi/aacraid/linit.c:243: warning: Function parameter or member 'shost' not described in 'aac_queuecommand' drivers/scsi/aacraid/linit.c:243: warning: Excess function parameter 'done' description in 'aac_queuecommand' drivers/scsi/aacraid/linit.c:1176: warning: Excess function parameter 'inode' description in 'aac_cfg_ioctl' Link: https://lore.kernel.org/r/20200713074645.126138-25-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aacraid: Provide suggested curly braces around empty body of if()Lee Jones1-1/+2
Fixes the following W=1 kernel build warning(s): drivers/scsi/aacraid/linit.c: In function ‘aac_biosparm’: drivers/scsi/aacraid/linit.c:368:41: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] 368 | param->heads, param->sectors, num)); | ^ Link: https://lore.kernel.org/r/20200713074645.126138-24-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: qedf: Demote obvious misuse of kerneldoc to standard comment blocksLee Jones1-10/+8
No attempt has been made to document any of the demoted functions here. Fixes the following W=1 kernel build warning(s): drivers/scsi/qedf/qedf_debugfs.c:25: warning: Function parameter or member 'qedf' not described in 'qedf_dbg_host_init' drivers/scsi/qedf/qedf_debugfs.c:25: warning: Function parameter or member 'dops' not described in 'qedf_dbg_host_init' drivers/scsi/qedf/qedf_debugfs.c:25: warning: Function parameter or member 'fops' not described in 'qedf_dbg_host_init' drivers/scsi/qedf/qedf_debugfs.c:25: warning: Excess function parameter 'pf' description in 'qedf_dbg_host_init' drivers/scsi/qedf/qedf_debugfs.c:51: warning: Function parameter or member 'qedf_dbg' not described in 'qedf_dbg_host_exit' drivers/scsi/qedf/qedf_debugfs.c:51: warning: Excess function parameter 'pf' description in 'qedf_dbg_host_exit' drivers/scsi/qedf/qedf_debugfs.c:64: warning: Function parameter or member 'drv_name' not described in 'qedf_dbg_init' Link: https://lore.kernel.org/r/20200713074645.126138-23-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@cavium.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aic7xxx: Fix 'amount_xferred' set but not used issueLee Jones1-0/+2
'amount_xferred' is used, but only in certain circumstances. Place the same stipulations on the defining/allocating of 'amount_xferred' as is placed when using it. We've been careful not to change any of the ordering semantics here. Fixes the following W=1 kernel build warning(s): drivers/scsi/aic7xxx/aic7xxx_osm.c: In function ‘ahc_done’: drivers/scsi/aic7xxx/aic7xxx_osm.c:1725:12: warning: variable ‘amount_xferred’ set but not used [-Wunused-but-set-variable] 1725 | uint32_t amount_xferred; | ^~~~~~~~~~~~~~ Link: https://lore.kernel.org/r/20200713074645.126138-22-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.com> Cc: "Daniel M. Eischen" <deischen@iworks.InterWorks.org> Cc: Doug Ledford <dledford@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aic7xxx: Remove unused variable 'targ'Lee Jones1-2/+0
Looks like checking the 'targ' was removed in 2005. Fixes the following W=1 kernel build warning(s): drivers/scsi/aic7xxx/aic7xxx_osm.c: In function ‘ahc_send_async’: drivers/scsi/aic7xxx/aic7xxx_osm.c:1604:28: warning: variable ‘targ’ set but not used [-Wunused-but-set-variable] 1604 | struct ahc_linux_target *targ; | ^~~~ Link: https://lore.kernel.org/r/20200713074645.126138-21-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.com> Cc: "Daniel M. Eischen" <deischen@iworks.InterWorks.org> Cc: Doug Ledford <dledford@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aic7xxx: Remove unused variable 'ahc'Lee Jones1-4/+0
Looks as though 'ahc' hasn't been used since 2005. Fixes the following W=1 kernel build warning(s): drivers/scsi/aic7xxx/aic7xxx_osm.c: In function ‘ahc_linux_slave_configure’: drivers/scsi/aic7xxx/aic7xxx_osm.c:674:20: warning: variable ‘ahc’ set but not used [-Wunused-but-set-variable] 674 | struct ahc_softc *ahc; | ^~~ Link: https://lore.kernel.org/r/20200713074645.126138-20-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.com> Cc: "Daniel M. Eischen" <deischen@iworks.InterWorks.org> Cc: Doug Ledford <dledford@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: aic7xxx: Remove unused variable 'tinfo'Lee Jones1-5/+0
Looks like none of the artifact from ahc_fetch_transinfo() are used anymore. Fixes the following W=1 kernel build warning(s): drivers/scsi/aic7xxx/aic7xxx_osm.c: In function ‘ahc_linux_target_alloc’: drivers/scsi/aic7xxx/aic7xxx_osm.c:567:30: warning: variable ‘tinfo’ set but not used [-Wunused-but-set-variable] 567 | struct ahc_initiator_tinfo *tinfo; | ^~~~~ Link: https://lore.kernel.org/r/20200713074645.126138-19-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.com> Cc: "Daniel M. Eischen" <deischen@iworks.InterWorks.org> Cc: Doug Ledford <dledford@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: bnx2fc: Demote obvious misuse of kerneldoc to standard comment blocksLee Jones1-4/+3
No attempt has been made to document either of the demoted functions here. Fixes the following W=1 kernel build warning(s): drivers/scsi/bnx2fc/bnx2fc_tgt.c:442: warning: Function parameter or member 'lport' not described in 'bnx2fc_rport_event_handler' drivers/scsi/bnx2fc/bnx2fc_tgt.c:442: warning: Function parameter or member 'rdata' not described in 'bnx2fc_rport_event_handler' drivers/scsi/bnx2fc/bnx2fc_tgt.c:442: warning: Function parameter or member 'event' not described in 'bnx2fc_rport_event_handler' drivers/scsi/bnx2fc/bnx2fc_tgt.c:665: warning: Function parameter or member 'hba' not described in 'bnx2fc_alloc_session_resc' drivers/scsi/bnx2fc/bnx2fc_tgt.c:665: warning: Function parameter or member 'tgt' not described in 'bnx2fc_alloc_session_resc' Link: https://lore.kernel.org/r/20200713074645.126138-18-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Cc: Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: qedf: Remove a whole host of unused variablesLee Jones1-26/+4
Fixes the following W=1 kernel build warning(s): drivers/scsi/qedf/qedf_io.c: In function ‘qedf_cmd_timeout’: drivers/scsi/qedf/qedf_io.c:25:5: warning: variable ‘op’ set but not used [-Wunused-but-set-variable] 25 | u8 op = 0; | ^~ drivers/scsi/qedf/qedf_io.c: In function ‘qedf_map_sg’: drivers/scsi/qedf/qedf_io.c:490:12: warning: variable ‘end_addr’ set but not used [-Wunused-but-set-variable] 490 | u64 addr, end_addr; | ^~~~~~~~ drivers/scsi/qedf/qedf_io.c: In function ‘qedf_post_io_req’: drivers/scsi/qedf/qedf_io.c:863:22: warning: variable ‘req_type’ set but not used [-Wunused-but-set-variable] 863 | enum fcoe_task_type req_type = 0; | ^~~~~~~~ drivers/scsi/qedf/qedf_io.c: In function ‘qedf_scsi_completion’: drivers/scsi/qedf/qedf_io.c:1134:31: warning: variable ‘task_ctx’ set but not used [-Wunused-but-set-variable] 1134 | struct e4_fcoe_task_context *task_ctx; | ^~~~~~~~ drivers/scsi/qedf/qedf_io.c: In function ‘qedf_scsi_done’: drivers/scsi/qedf/qedf_io.c:1345:6: warning: variable ‘xid’ set but not used [-Wunused-but-set-variable] 1345 | u16 xid; | ^~~ drivers/scsi/qedf/qedf_io.c: In function ‘qedf_initiate_abts’: drivers/scsi/qedf/qedf_io.c:1866:6: warning: variable ‘r_a_tov’ set but not used [-Wunused-but-set-variable] 1866 | u32 r_a_tov = 0; | ^~~~~~~ drivers/scsi/qedf/qedf_io.c: In function ‘qedf_process_abts_compl’: drivers/scsi/qedf/qedf_io.c:1967:11: warning: variable ‘xid’ set but not used [-Wunused-but-set-variable] 1967 | uint16_t xid; | ^~~ drivers/scsi/qedf/qedf_io.c: In function ‘qedf_initiate_cleanup’: drivers/scsi/qedf/qedf_io.c:2163:31: warning: variable ‘task’ set but not used [-Wunused-but-set-variable] 2163 | struct e4_fcoe_task_context *task; | ^~~~ drivers/scsi/qedf/qedf_io.c: In function ‘qedf_process_unsol_compl’: drivers/scsi/qedf/qedf_io.c:2534:11: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable] 2534 | uint16_t tmp; | ^~~ Link: https://lore.kernel.org/r/20200713074645.126138-17-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@cavium.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: arcmsr: Remove some set but unused variablesLee Jones1-13/+8
Fixes the following W=1 kernel build warning(s): drivers/scsi/arcmsr/arcmsr_hba.c: In function ‘arcmsr_remap_pciregion’: drivers/scsi/arcmsr/arcmsr_hba.c:286:30: warning: variable ‘flags’ set but not used [-Wunused-but-set-variable] 286 | unsigned long addr, range, flags; | ^~~~~ drivers/scsi/arcmsr/arcmsr_hba.c: In function ‘arcmsr_suspend’: drivers/scsi/arcmsr/arcmsr_hba.c:1070:11: warning: variable ‘intmask_org’ set but not used [-Wunused-but-set-variable] 1070 | uint32_t intmask_org; | ^~~~~~~~~~~ drivers/scsi/arcmsr/arcmsr_hba.c: In function ‘arcmsr_done4abort_postqueue’: drivers/scsi/arcmsr/arcmsr_hba.c:1410:29: warning: variable ‘cdb_phy_hipart’ set but not used [-Wunused-but-set-variable] 1410 | unsigned long ccb_cdb_phy, cdb_phy_hipart; | ^~~~~~~~~~~~~~ drivers/scsi/arcmsr/arcmsr_hba.c: In function ‘arcmsr_hbaD_postqueue_isr’: drivers/scsi/arcmsr/arcmsr_hba.c:2448:36: warning: variable ‘cdb_phy_hipart’ set but not used [-Wunused-but-set-variable] 2448 | unsigned long flags, ccb_cdb_phy, cdb_phy_hipart; | ^~~~~~~~~~~~~~ drivers/scsi/arcmsr/arcmsr_hba.c: In function ‘arcmsr_hbaD_polling_ccbdone’: drivers/scsi/arcmsr/arcmsr_hba.c:3498:36: warning: variable ‘cdb_phy_hipart’ set but not used [-Wunused-but-set-variable] 3498 | unsigned long flags, ccb_cdb_phy, cdb_phy_hipart; | ^~~~~~~~~~~~~~ Link: https://lore.kernel.org/r/20200713074645.126138-15-lee.jones@linaro.org Cc: support@areca.com.tw Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: bnx2fc: Fix a couple of bitrotted function documentation headersLee Jones1-3/+3
Likely a result of documentation not keeping up with API updates (a.k.a. bitrot). Fixes the following W=1 kernel build warning(s): drivers/scsi/bnx2fc/bnx2fc_hwi.c:493: warning: Function parameter or member 'hba' not described in 'bnx2fc_send_session_destroy_req' drivers/scsi/bnx2fc/bnx2fc_hwi.c:493: warning: Excess function parameter 'port' description in 'bnx2fc_send_session_destroy_req' drivers/scsi/bnx2fc/bnx2fc_hwi.c:1345: warning: Function parameter or member 'context' not described in 'bnx2fc_indicate_kcqe' drivers/scsi/bnx2fc/bnx2fc_hwi.c:1345: warning: Function parameter or member 'kcq' not described in 'bnx2fc_indicate_kcqe' drivers/scsi/bnx2fc/bnx2fc_hwi.c:1345: warning: Excess function parameter 'hba' description in 'bnx2fc_indicate_kcqe' drivers/scsi/bnx2fc/bnx2fc_hwi.c:1345: warning: Excess function parameter 'kcqe' description in 'bnx2fc_indicate_kcqe' Link: https://lore.kernel.org/r/20200713074645.126138-14-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Cc: Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: libfc: Provide missing and repair existing function documentationLee Jones1-4/+7
Mostly due to descriptions not keeping up with API changes. Fixes the following W=1 kernel build warning(s): drivers/scsi/libfc/fc_fcp.c:299: warning: Function parameter or member 'status_code' not described in 'fc_fcp_retry_cmd' drivers/scsi/libfc/fc_fcp.c:595: warning: Function parameter or member 'seq' not described in 'fc_fcp_send_data' drivers/scsi/libfc/fc_fcp.c:595: warning: Excess function parameter 'sp' description in 'fc_fcp_send_data' drivers/scsi/libfc/fc_fcp.c:1289: warning: Function parameter or member 't' not described in 'fc_lun_reset_send' drivers/scsi/libfc/fc_fcp.c:1289: warning: Excess function parameter 'data' description in 'fc_lun_reset_send' drivers/scsi/libfc/fc_fcp.c:1422: warning: Function parameter or member 't' not described in 'fc_fcp_timeout' drivers/scsi/libfc/fc_fcp.c:1422: warning: Excess function parameter 'data' description in 'fc_fcp_timeout' drivers/scsi/libfc/fc_fcp.c:1696: warning: Function parameter or member 'code' not described in 'fc_fcp_recovery' drivers/scsi/libfc/fc_fcp.c:1716: warning: Function parameter or member 'offset' not described in 'fc_fcp_srr' drivers/scsi/libfc/fc_fcp.c:1859: warning: Function parameter or member 'sc_cmd' not described in 'fc_queuecommand' drivers/scsi/libfc/fc_fcp.c:1859: warning: Excess function parameter 'cmd' description in 'fc_queuecommand' Link: https://lore.kernel.org/r/20200713074645.126138-13-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: libfc: Fix a couple of misdocumented function parametersLee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/scsi/libfc/fc_rport.c:129: warning: Function parameter or member 'port_id' not described in 'fc_rport_create' drivers/scsi/libfc/fc_rport.c:129: warning: Excess function parameter 'ids' description in 'fc_rport_create' drivers/scsi/libfc/fc_rport.c:1452: warning: Function parameter or member 'rdata_arg' not described in 'fc_rport_logo_resp' drivers/scsi/libfc/fc_rport.c:1452: warning: Excess function parameter 'lport_arg' description in 'fc_rport_logo_resp' Link: https://lore.kernel.org/r/20200713074645.126138-12-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: libfc: Repair function parameter documentationLee Jones1-2/+5
Either misdocumentation and/or bitrot. Fixes the following W=1 kernel build warning(s): drivers/scsi/libfc/fc_lport.c:412: warning: Function parameter or member 'in_fp' not described in 'fc_lport_recv_echo_req' drivers/scsi/libfc/fc_lport.c:412: warning: Excess function parameter 'fp' description in 'fc_lport_recv_echo_req' drivers/scsi/libfc/fc_lport.c:447: warning: Function parameter or member 'in_fp' not described in 'fc_lport_recv_rnid_req' drivers/scsi/libfc/fc_lport.c:447: warning: Excess function parameter 'fp' description in 'fc_lport_recv_rnid_req' drivers/scsi/libfc/fc_lport.c:1330: warning: Function parameter or member 'state' not described in 'fc_lport_enter_ns' drivers/scsi/libfc/fc_lport.c:1428: warning: Function parameter or member 'state' not described in 'fc_lport_enter_ms' drivers/scsi/libfc/fc_lport.c:1939: warning: Function parameter or member 'tov' not described in 'fc_lport_els_request' Link: https://lore.kernel.org/r/20200713074645.126138-11-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: qedf: Remove set but not checked variable 'tmp'Lee Jones1-3/+2
Looks like the return value of readw() has never been checked. Fixes the following W=1 kernel build warning(s): drivers/scsi/qedf/qedf_main.c: In function ‘__qedf_probe’: drivers/scsi/qedf/qedf_main.c:3203:6: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20200713074645.126138-10-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@cavium.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: qedf: Demote obvious misuse of kerneldoc to standard comment blocksLee Jones1-3/+2
No attempt has been made to document either of the demoted functions here. Fixes the following W=1 kernel build warning(s): drivers/scsi/qedf/qedf_main.c:1027: warning: Function parameter or member 'lport' not described in 'qedf_xmit' drivers/scsi/qedf/qedf_main.c:1027: warning: Function parameter or member 'fp' not described in 'qedf_xmit' drivers/scsi/qedf/qedf_main.c:1426: warning: Function parameter or member 'lport' not described in 'qedf_rport_event_handler' drivers/scsi/qedf/qedf_main.c:1426: warning: Function parameter or member 'rdata' not described in 'qedf_rport_event_handler' drivers/scsi/qedf/qedf_main.c:1426: warning: Function parameter or member 'event' not described in 'qedf_rport_event_handler' Link: https://lore.kernel.org/r/20200713074645.126138-9-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@cavium.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: bnx2fc: Repair a range of kerneldoc issuesLee Jones1-10/+8
>From bitrotted and missing function parameters to misuse of kerneldoc format. Fixes the following W=1 kernel build warning(s): drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1082: warning: Function parameter or member 'lport' not described in 'bnx2fc_update_src_mac' drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1082: warning: Function parameter or member 'addr' not described in 'bnx2fc_update_src_mac' drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1082: warning: Excess function parameter 'fip' description in 'bnx2fc_update_src_mac' drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1082: warning: Excess function parameter 'old' description in 'bnx2fc_update_src_mac' drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1082: warning: Excess function parameter 'new' description in 'bnx2fc_update_src_mac' drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1670: warning: Function parameter or member 'netdev' not described in 'bnx2fc_destroy' drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1670: warning: Excess function parameter 'buffer' description in 'bnx2fc_destroy' drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1670: warning: Excess function parameter 'kp' description in 'bnx2fc_destroy' drivers/scsi/bnx2fc/bnx2fc_fcoe.c:2108: warning: Function parameter or member 'netdev' not described in 'bnx2fc_disable' drivers/scsi/bnx2fc/bnx2fc_fcoe.c:2236: warning: Function parameter or member 'netdev' not described in 'bnx2fc_enable' drivers/scsi/bnx2fc/bnx2fc_fcoe.c:2529: warning: Function parameter or member 'dev' not described in 'bnx2fc_ulp_exit' drivers/scsi/bnx2fc/bnx2fc_fcoe.c:2962: warning: cannot understand function prototype: 'struct scsi_host_template bnx2fc_shost_template = ' drivers/scsi/bnx2fc/bnx2fc_fcoe.c:2996: warning: cannot understand function prototype: 'struct cnic_ulp_ops bnx2fc_cnic_cb = ' Link: https://lore.kernel.org/r/20200713074645.126138-8-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Cc: Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: fcoe: Correct some kernel-doc issuesLee Jones1-1/+3
Mainly due to misdocumentation or bitrotted descriptions. Fixes the following W=1 kernel build warning(s): drivers/scsi/fcoe/fcoe_transport.c:396: warning: Function parameter or member 'skb' not described in 'fcoe_check_wait_queue' drivers/scsi/fcoe/fcoe_transport.c:447: warning: Function parameter or member 't' not described in 'fcoe_queue_timer' drivers/scsi/fcoe/fcoe_transport.c:447: warning: Excess function parameter 'lport' description in 'fcoe_queue_timer' drivers/scsi/fcoe/fcoe_transport.c:682: warning: Function parameter or member 'netdev' not described in 'fcoe_netdev_map_lookup' Link: https://lore.kernel.org/r/20200713074645.126138-7-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: fcoe: Fix a myriad of documentation issuesLee Jones1-14/+14
Mostly missing or incorrect (bitrotted) function parameters. Fixes the following W=1 kernel build warning(s): drivers/scsi/fcoe/fcoe_ctlr.c:139: warning: Function parameter or member 'mode' not described in 'fcoe_ctlr_init' drivers/scsi/fcoe/fcoe_ctlr.c:604: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_encaps' drivers/scsi/fcoe/fcoe_ctlr.c:1312: warning: Function parameter or member 'skb' not described in 'fcoe_ctlr_recv_clr_vlink' drivers/scsi/fcoe/fcoe_ctlr.c:1312: warning: Excess function parameter 'fh' description in 'fcoe_ctlr_recv_clr_vlink' drivers/scsi/fcoe/fcoe_ctlr.c:1781: warning: Function parameter or member 't' not described in 'fcoe_ctlr_timeout' drivers/scsi/fcoe/fcoe_ctlr.c:1781: warning: Excess function parameter 'arg' description in 'fcoe_ctlr_timeout' drivers/scsi/fcoe/fcoe_ctlr.c:1904: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_recv_flogi' drivers/scsi/fcoe/fcoe_ctlr.c:2166: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_disc_stop_locked' drivers/scsi/fcoe/fcoe_ctlr.c:2166: warning: Excess function parameter 'fip' description in 'fcoe_ctlr_disc_stop_locked' drivers/scsi/fcoe/fcoe_ctlr.c:2188: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_disc_stop' drivers/scsi/fcoe/fcoe_ctlr.c:2188: warning: Excess function parameter 'fip' description in 'fcoe_ctlr_disc_stop' drivers/scsi/fcoe/fcoe_ctlr.c:2204: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_disc_stop_final' drivers/scsi/fcoe/fcoe_ctlr.c:2204: warning: Excess function parameter 'fip' description in 'fcoe_ctlr_disc_stop_final' drivers/scsi/fcoe/fcoe_ctlr.c:2273: warning: Function parameter or member 'frport' not described in 'fcoe_ctlr_vn_parse' drivers/scsi/fcoe/fcoe_ctlr.c:2273: warning: Excess function parameter 'rdata' description in 'fcoe_ctlr_vn_parse' drivers/scsi/fcoe/fcoe_ctlr.c:2804: warning: Function parameter or member 'frport' not described in 'fcoe_ctlr_vlan_parse' drivers/scsi/fcoe/fcoe_ctlr.c:2804: warning: Excess function parameter 'rdata' description in 'fcoe_ctlr_vlan_parse' drivers/scsi/fcoe/fcoe_ctlr.c:2900: warning: Excess function parameter 'min_len' description in 'fcoe_ctlr_vlan_send' drivers/scsi/fcoe/fcoe_ctlr.c:2977: warning: Function parameter or member 'fip' not described in 'fcoe_ctlr_vlan_recv' drivers/scsi/fcoe/fcoe_ctlr.c:2977: warning: Function parameter or member 'skb' not described in 'fcoe_ctlr_vlan_recv' drivers/scsi/fcoe/fcoe_ctlr.c:2977: warning: Excess function parameter 'lport' description in 'fcoe_ctlr_vlan_recv' drivers/scsi/fcoe/fcoe_ctlr.c:2977: warning: Excess function parameter 'fp' description in 'fcoe_ctlr_vlan_recv' drivers/scsi/fcoe/fcoe_ctlr.c:3033: warning: Function parameter or member 'callback' not described in 'fcoe_ctlr_disc_start' drivers/scsi/fcoe/fcoe_ctlr.c:3033: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_disc_start' drivers/scsi/fcoe/fcoe_ctlr.c:3033: warning: Excess function parameter 'fip' description in 'fcoe_ctlr_disc_start' [mkp: fixed function name in comment] Link: https://lore.kernel.org/r/20200713074645.126138-6-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: fcoe: Fix various kernel-doc infringementsLee Jones1-6/+4
A couple of headers make no attempt to document their associated function parameters. Others looks as if they are suffering with a little bitrot. Fixes the following W=1 kernel build warning(s): drivers/scsi/fcoe/fcoe.c:654: warning: Function parameter or member 'lport' not described in 'fcoe_netdev_features_change' drivers/scsi/fcoe/fcoe.c:654: warning: Function parameter or member 'netdev' not described in 'fcoe_netdev_features_change' drivers/scsi/fcoe/fcoe.c:2039: warning: Function parameter or member 'ctlr_dev' not described in 'fcoe_ctlr_mode' drivers/scsi/fcoe/fcoe.c:2039: warning: Excess function parameter 'cdev' description in 'fcoe_ctlr_mode' drivers/scsi/fcoe/fcoe.c:2144: warning: Function parameter or member 'fcoe' not described in 'fcoe_dcb_create' drivers/scsi/fcoe/fcoe.c:2144: warning: Excess function parameter 'netdev' description in 'fcoe_dcb_create' drivers/scsi/fcoe/fcoe.c:2144: warning: Excess function parameter 'port' description in 'fcoe_dcb_create' drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'lport' not described in 'fcoe_elsct_send' drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'did' not described in 'fcoe_elsct_send' drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'fp' not described in 'fcoe_elsct_send' drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'op' not described in 'fcoe_elsct_send' drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'resp' not described in 'fcoe_elsct_send' drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'arg' not described in 'fcoe_elsct_send' drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'timeout' not described in 'fcoe_elsct_send' Link: https://lore.kernel.org/r/20200713074645.126138-5-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: libfc: trivial: Fix spelling mistake of 'discovery'Lee Jones1-1/+1
This is my fault (can't even blame copy/paste). Link: https://lore.kernel.org/r/20200713074645.126138-4-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.de> Reported-by: Johannes Thumshirn <Johannes.Thumshirn@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: scsi_transport_fc: Match HBA Attribute Length with HBAAPI V2.0 definitionsLee Jones1-2/+2
According to 'include/scsi/scsi_transport_fc.h': "Attributes are based on HBAAPI V2.0 definitions" ... so it seems sane to match the 'HBA Attribute Length' to them. If we don't, the compiler complains that the copied data will be truncated. Fixes the following W=1 kernel build warning(s): In file included from include/linux/bitmap.h:9, from include/linux/cpumask.h:12, from include/linux/smp.h:13, from include/linux/percpu.h:7, from include/scsi/libfc.h:13, from drivers/scsi/libfc/fc_elsct.c:17: In function ‘strncpy’, inlined from ‘fc_ct_ms_fill.constprop’ at include/scsi/fc_encode.h:263:3: include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ output may be truncated copying 64 bytes from a string of length 79 [-Wstringop-truncation] 297 | #define __underlying_strncpy __builtin_strncpy | ^ include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’ 307 | return __underlying_strncpy(p, q, size); | ^~~~~~~~~~~~~~~~~~~~ In function ‘strncpy’, inlined from ‘fc_ct_ms_fill.constprop’ at include/scsi/fc_encode.h:275:3: include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ output may be truncated copying 64 bytes from a string of length 79 [-Wstringop-truncation] 297 | #define __underlying_strncpy __builtin_strncpy | ^ include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’ 307 | return __underlying_strncpy(p, q, size); | ^~~~~~~~~~~~~~~~~~~~ Link: https://lore.kernel.org/r/20200713074645.126138-3-lee.jones@linaro.org Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-15scsi: libfc: Supply some missing kerneldoc struct/function attributes/paramsLee Jones1-1/+6
Fixes the following W=1 kernel build warning(s): drivers/scsi/libfc/fc_exch.c:66: warning: Function parameter or member 'left' not described in 'fc_exch_pool' drivers/scsi/libfc/fc_exch.c:66: warning: Function parameter or member 'right' not described in 'fc_exch_pool' drivers/scsi/libfc/fc_exch.c:100: warning: Function parameter or member 'lport' not described in 'fc_exch_mgr' drivers/scsi/libfc/fc_exch.c:727: warning: Function parameter or member 'ep' not described in 'fc_invoke_resp' drivers/scsi/libfc/fc_exch.c:727: warning: Function parameter or member 'sp' not described in 'fc_invoke_resp' drivers/scsi/libfc/fc_exch.c:727: warning: Function parameter or member 'fp' not described in 'fc_invoke_resp' Link: https://lore.kernel.org/r/20200713074645.126138-2-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-14scsi: scsi_debug: Update documentation url and bump versionDouglas Gilbert1-3/+3
This driver maintains a version number which is cross-referenced in the documentation (e.g. to indicate when features are added or changed) and exposed through the responses to various SCSI commands. For example the version number is use as the Product Revision number in standard SCSI INQUIRY responses issued by this driver. The version date string is placed in a vendor specific area in each standard SCSI INQUIRY response. This patch bumps both. Update the driver documentation URL that appears at the top of the driver source file. Link: https://lore.kernel.org/r/20200712182927.72044-3-dgilbert@interlog.com Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-14scsi: scsi_debug: every_nth triggered error injectionDouglas Gilbert1-130/+101
This patch simplifies, or at least makes more consistent, the way setting the every_nth parameter injects errors. Here is a list of 'opts' flags and in which cases they inject errors when abs(every_nth)%command_count == 0 is reached: - OPT_RECOVERED_ERR: issued on READ(*)s, WRITE(*)s and WRITE_SCATTEREDs - OPT_DIF_ERR: issued on READ(*)s, WRITE(*)s and WRITE_SCATTEREDs - OPT_DIX_ERR: issued on READ(*)s, WRITE(*)s and WRITE_SCATTEREDs - OPT_SHORT_TRANSFER: issued on READ(*)s - OPT_TRANSPORT_ERR: issued on all commands - OPT_CMD_ABORT: issued on all commands The other uses of every_nth were not modified. Previously if, for example, OPT_SHORT_TRANSFER was armed then if (abs(every_nth) % command_count == 0) occurred during a command that was _not_ a READ, then no error injection occurred. This behaviour puzzled several testers. Now a global "inject_pending" flag is set and the _next_ READ will get hit and that flag is cleared. OPT_RECOVERED_ERR, OPT_DIF_ERR and OPT_DIX_ERR have similar behaviour. A downside of this is that there might be a hang-over pending injection that gets triggered by a following test. Also expand the every_nth runtime parameter so that it can take hex value (i.e. with a leading '0x') as well as a decimal value. Now both the 'opts' and the 'every_nth' runtime parameters can take hexadecimal values. Link: https://lore.kernel.org/r/20200712182927.72044-2-dgilbert@interlog.com Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-14scsi: scsi_debug: Support hostwide tagsJohn Garry1-12/+68
Many SCSI HBAs support a hostwide tagset, whereby each command submitted to the HW from all submission queues must have a unique tag identifier. Normally this unique tag will be in the range [0, max queue], where "max queue" is the depth of each of the submission queues. Add support for this hostwide tag feature, via module parameter "host_max_queue". A non-zero value means that the feature is enabled. In this case, the submission queues are not exposed to upper layer, i.e. from blk-mq prespective, the device has a single hw queue. There are 2 reasons for this: a. It is assumed that the host can support nr_hw_queues * can_queue commands, but this is not true for hostwide tags b. For nr_hw_queues != 0, the request tag is not unique over all HW queues, and some HBA drivers want to use this tag for the hostwide tag However, like many SCSI HBA drivers today - megaraid sas being an example - the full set of HW submission queues are still used in the LLDD driver. So instead of using a complicated "reply_map" to create a per-CPU submission queue mapping like megaraid_sas (as it depends on a PCI device + MSIs) - use a simple algorithm: hwq = cpu % queue count If the host_max_queue param is set non-zero, then the max queue depth is fixed at this value also. If and when hostwide shared tags are supported in blk-mq/scsi mid-layer, then the policy to set nr_hw_queues = 0 for hostwide tags can be revised. Link: https://lore.kernel.org/r/1594297400-24756-3-git-send-email-john.garry@huawei.com Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-14scsi: scsi_debug: Add check for sdebug_max_queue during module initJohn Garry1-0/+6
sdebug_max_queue should not exceed SDEBUG_CANQUEUE, otherwise crashes like this can be triggered by passing an out-of-range value: Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019 pstate: 20400009 (nzCv daif +PAN -UAO BTYPE=--) pc : schedule_resp+0x2a4/0xa70 [scsi_debug] lr : schedule_resp+0x52c/0xa70 [scsi_debug] sp : ffff800022ab36f0 x29: ffff800022ab36f0 x28: ffff0023a935a610 x27: ffff800008e0a648 x26: 0000000000000003 x25: ffff0023e84f3200 x24: 00000000003d0900 x23: 0000000000000000 x22: 0000000000000000 x21: ffff0023be60a320 x20: ffff0023be60b538 x19: ffff800008e13000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000001 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 00000000000000c1 x5 : 0000020000200000 x4 : dead0000000000ff x3 : 0000000000000200 x2 : 0000000000000200 x1 : ffff800008e13d88 x0 : 0000000000000000 Call trace: schedule_resp+0x2a4/0xa70 [scsi_debug] scsi_debug_queuecommand+0x2c4/0x9e0 [scsi_debug] scsi_queue_rq+0x698/0x840 __blk_mq_try_issue_directly+0x108/0x228 blk_mq_request_issue_directly+0x58/0x98 blk_mq_try_issue_list_directly+0x5c/0xf0 blk_mq_sched_insert_requests+0x18c/0x200 blk_mq_flush_plug_list+0x11c/0x190 blk_flush_plug_list+0xdc/0x110 blk_finish_plug+0x38/0x210 blkdev_direct_IO+0x450/0x4d8 generic_file_read_iter+0x84/0x180 blkdev_read_iter+0x3c/0x50 aio_read+0xc0/0x170 io_submit_one+0x5c8/0xc98 __arm64_sys_io_submit+0x1b0/0x258 el0_svc_common.constprop.3+0x68/0x170 do_el0_svc+0x24/0x90 el0_sync_handler+0x13c/0x1a8 el0_sync+0x158/0x180 Code: 528847e0 72a001e0 6b00003f 540018cd (3941c340) In addition, it should not be less than 1. So add checks for these, and fail the module init for those cases. [mkp: changed if condition to match error message] Link: https://lore.kernel.org/r/1594297400-24756-2-git-send-email-john.garry@huawei.com Fixes: c483739430f1 ("scsi_debug: add multiple queue support") Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-14scsi: hisi_sas: Remove one kerneldoc commentJohn Garry1-1/+1
The comment for interrupt_init_v2_hw() should not be a kerneldoc comment. Remove it. Link: https://lore.kernel.org/r/1594627471-235395-3-git-send-email-john.garry@huawei.com Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-14scsi: hisi_sas: Directly trigger SCSI error handling for completion errorsLuo Jiaxing3-3/+9
Abort failed commands in completion path. This avoids having to wait for block layer timeouts and triggering the SCSI error handling thread. Link: https://lore.kernel.org/r/1594627471-235395-2-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-14scsi: ufs-mediatek: Add inline encryption supportStanley Chu2-0/+23
Add inline encryption support to ufs-mediatek. The standards-compliant parts, such as querying the crypto capabilities and enabling crypto for individual UFS requests, are already handled by ufshcd-crypto.c, which itself is wired into the blk-crypto framework. However MediaTek UFS host requires a vendor-specific hce_enable operation to allow crypto-related registers being accessed normally in kernel. After this step, MediaTek UFS host can work as standard-compliant host for inline-encryption related functions. Link: https://lore.kernel.org/r/20200712003226.7593-1-stanley.chu@mediatek.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-14scsi: cxgb4i: Clean up a debug printkDan Carpenter1-2/+1
The pr_fmt() at the top of the file already includes the __func__ so we can remove the duplicative "cxgbi_conn_init_pdu:" from the string here. Now it all fits on one line as well. Link: https://lore.kernel.org/r/20200713105100.GA251988@mwanda Acked-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-14scsi: virtio_scsi: Remove unnecessary condition checkXianting Tian1-8/+4
kmem_cache_destroy() and mempool_destroy() both correctly handle null pointer parameters. There is no need to check if the parameter is null before calling these functions. Link: https://lore.kernel.org/r/1594307167-8807-1-git-send-email-xianting_tian@126.com Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Xianting Tian <xianting_tian@126.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-14scsi: cxgb4i: Fix dereference of pointer tdata before it is null checkedColin Ian King1-2/+4
Currently pointer tdata is being dereferenced on the initialization of pointer skb before tdata is null checked. This could lead to a potential null pointer dereference. Fix this by dereferencing tdata after tdata has been null pointer sanity checked. Link: https://lore.kernel.org/r/20200709135217.1408105-1-colin.king@canonical.com Fixes: e33c2482289b ("scsi: cxgb4i: Add support for iSCSI segmentation offload") Addresses-Coverity: ("Dereference before null check") Acked-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-14scsi: target: Remove unused variable 'tpg'Wei Yongjun1-2/+0
Gcc reports warning as follows: drivers/target/target_core_pr.c:1162:26: warning: variable 'tpg' set but not used [-Wunused-but-set-variable] 1162 | struct se_portal_group *tpg; | ^~~ After commit 63c9ffe473d3 ("scsi: target: Check enforce_pr_isids during registration"), 'tpg' is never used. Remove it to avoid build warning. Link: https://lore.kernel.org/r/20200709114636.69256-1-weiyongjun1@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-14scsi: ufs: Fix and simplify setup_xfer_req variant operationStanley Chu1-4/+5
Add missing setup_xfer_req() call in ufshcd_issue_devman_upiu_cmd() in ufs-bsg path. Relocate existing setup_xfer_req() calls to a common place, i.e., ufshcd_send_command(), to simplify the driver. Link: https://lore.kernel.org/r/20200706060707.32608-3-stanley.chu@mediatek.com Acked-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-14scsi: ufs: Simplify completion timestamp for SCSI and query commandsStanley Chu1-2/+1
Simplify recording command completion time in __ufshcd_transfer_req_compl() by assigning lrbp->compl_time_stamp in a unified location. Link: https://lore.kernel.org/r/20200706060707.32608-2-stanley.chu@mediatek.com Acked-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-08scsi: target: cxgbit: Remove tx flow control codeVarun Prakash3-23/+4
Firmware does tx flow control so remove tx flow control code from the driver. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-08scsi: target: cxgbit: Check connection state before issuing hardware commandVarun Prakash1-8/+24
Current code does not check connection state before issuing header/data digest offload and DDP page size setup hardware command. Add a connection state check to issue hardware command only if connection is in established state. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-08scsi: cxgb4i: Add support for iSCSI segmentation offloadVarun Prakash4-231/+726
T5/T6 adapters support iSCSI segmentation offload. To transmit iSCSI PDUs using ISO driver provides iSCSI header and data scatterlist to the adapter, adapter forms multiple iSCSI PDUs and transmits them. [mkp: checkpatch] Link: https://lore.kernel.org/r/1593448871-2972-1-git-send-email-varun@chelsio.com Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-08scsi: storvsc: Add validation for untrusted Hyper-V valuesAndres Beltran1-0/+11
For additional robustness in the face of Hyper-V errors or malicious behavior, validate all values that originate from packets that Hyper-V has sent to the guest. Ensure that invalid values cannot cause data being copied out of the bounds of the source buffer when calling memcpy. Ensure that outgoing packets do not have any leftover guest memory that has not been zeroed out. Link: https://lore.kernel.org/r/20200706160928.53049-1-lkmlabelt@gmail.com Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andres Beltran <lkmlabelt@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-08scsi: advansys: docs: Eliminate duplicated wordRandy Dunlap1-1/+1
Drop the doubled word "be". Link: https://lore.kernel.org/r/20200707180414.10467-18-rdunlap@infradead.org Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: Matthew Wilcox <willy@infradead.org> Cc: Hannes Reinecke <hare@suse.com> Cc: linux-scsi@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 16:22:14 +0300