summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-05-20sparc32,leon: move leon mmu functions to leon_mm.cSam Ravnborg3-81/+85
We already have a leaon specific file - so keep all the laon stuff in one place. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Konrad Eisele <konrad@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20sparc32,leon: remove duplicate definitions in leon.hSam Ravnborg1-15/+2
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Konrad Eisele <konrad@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20sparc32,leon: remove duplicate UART register definitionsSam Ravnborg1-25/+0
The registers are defined in leon_amba too. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Konrad Eisele <konrad@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20sparc32,leon: move leon ASI definitions to asi.hSam Ravnborg2-13/+14
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Konrad Eisele <konrad@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20sparc32: move trap table to a separate fileSam Ravnborg2-324/+419
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20sparc64: renamed ttable.S to ttable_64.SSam Ravnborg2-1/+1
To allow us to add ttable_32.S Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20sparc32: Remove asm/sysen.h header.David S. Miller1-15/+0
Defines a sun4c register, thus completely unused. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20sparc32: Delete asm/smpprim.hDavid S. Miller1-54/+0
Completely unused. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20sparc32: Remove unused empty_bad_page{,_table} declarations.David S. Miller1-2/+0
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20sparc32: Kill boot_cpu_id4David S. Miller3-6/+1
It is written, but never actually read. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20sparc32: Move GET_PROCESSOR*_ID() out of asm/asmmacro.hDavid S. Miller2-10/+5
GET_PROCESSOR4D_ID is completely unused, so delete it. Move GET_PROCESSOR4M_ID to the sun4m specific trap code which uses it. We now no longer need to include asm/asi.h Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20sparc32: Remove completely unused code from asm/cache.hDavid S. Miller1-114/+0
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20net: qmi_wwan: Add Vodafone/Huawei K5005 supportBjørn Mork1-0/+8
Tested-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20net: cdc_ether: Add ZTE WWAN matches before generic EthernetAndrew Bird (Sphere Systems)1-0/+56
Some ZTE WWAN devices have generic CDC Ether descriptors. Add those into the whitelist so that we get FLAG_WWAN on the interface Signed-off-by: Andrew Bird <ajb@spheresystems.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20ipv6: use skb coalescing in reassemblyEric Dumazet1-6/+20
ip6_frag_reasm() can use skb_try_coalesce() to build optimized skb, reducing memory used by them (truesize), and reducing number of cache line misses and overhead for the consumer. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20ipv4: use skb coalescing in defragmentationEric Dumazet1-6/+20
ip_frag_reasm() can use skb_try_coalesce() to build optimized skb, reducing memory used by them (truesize), and reducing number of cache line misses and overhead for the consumer. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20net: introduce skb_try_coalesce()Eric Dumazet3-64/+94
Move tcp_try_coalesce() protocol independent part to skb_try_coalesce(). skb_try_coalesce() can be used in IPv4 defrag and IPv6 reassembly, to build optimized skbs (less sk_buff, and possibly less 'headers') skb_try_coalesce() is zero copy, unless the copy can fit in destination header (its a rare case) kfree_skb_partial() is also moved to net/core/skbuff.c and exported, because IPv6 will need it in patch (ipv6: use skb coalescing in reassembly). Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20net:ipv6:fixed space issues relating to operators.Jeffrin Jose1-2/+2
Fixed space issues relating to operators found by checkpatch.pl tool in net/ipv6/udp.c Signed-off-by: Jeffrin Jose <ahiliation@yahoo.co.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20net:ipv6:fixed a trailing white space issue.Jeffrin Jose1-1/+1
Fixed a trailing white space issue found by checkpatch.pl tool in net/ipv6/udp.c Signed-off-by: Jeffrin Jose <ahiliation@yahoo.co.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20Merge tag 'parisc-fixes' of ↵Linus Torvalds3-19/+30
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6 Pull PA-RISC fixes from James Bottomley: "This is a set of three bug fixes that gets parisc running again on systems with PA1.1 processors. Two fix regressions introduced in 2.6.39 and one fixes a prefetch bug that only affects PA7300LC processors. We also have another pending fix to do with the sectional arrangement of vmlinux.lds, but there's a query on it during testing on one particular system type, so I'll hold off sending it in for now." * tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] fix panic on prefetch(NULL) on PA7300LC [PARISC] fix crash in flush_icache_page_asm on PA1.1 [PARISC] fix PA1.1 oops on boot
2012-05-20Merge branch 'x86/ld-fix' of ↵Linus Torvalds7-65/+205
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 linker bug workarounds from Peter Anvin. GNU ld-2.22.52.0.[12] (*) has an unfortunate bug where it incorrectly turns certain relocation entries absolute. Section-relative symbols that are part of otherwise empty sections are silently changed them to absolute. We rely on section-relative symbols staying section-relative, and actually have several sections in the linker script solely for this purpose. See for example http://sourceware.org/bugzilla/show_bug.cgi?id=14052 We could just black-list the buggy linker, but it appears that it got shipped in at least F17, and possibly other distros too, so it's sadly not some rare unusual case. This backports the workaround from the x86/trampoline branch, and as Peter says: "This is not a minimal fix, not at all, but it is a tested code base." * 'x86/ld-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, relocs: When printing an error, say relative or absolute x86, relocs: Workaround for binutils 2.22.52.0.1 section bug x86, realmode: 16-bit real-mode code support for relocs tool (*) That's a manly release numbering system. Stupid, sure. But manly.
2012-05-20sparc32: Add ucmpdi2.o to obj-y instead of lib-y.David S. Miller1-2/+2
Otherwise if no references exist in the static kernel image, we won't export the symbol properly to modules. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-20sparc32: add ucmpdi2Sam Ravnborg2-1/+20
Based on copy from microblaze add ucmpdi2 implementation. This fixes build of niu driver which failed with: drivers/built-in.o: In function `niu_get_nfc': niu.c:(.text+0x91494): undefined reference to `__ucmpdi2' This driver will never be used on a sparc32 system, but patch added to fix build breakage with all*config builds. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19Merge branch 'emev2' of ↵Olof Johansson14-0/+1458
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas into next/soc * 'emev2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas: mach-shmobile: Use DT_MACHINE for KZM9D V3 mach-shmobile: Emma Mobile EV2 DT support V3 mach-shmobile: KZM9D board Ethernet support V3 mach-shmobile: Emma Mobile EV2 GPIO support V3 mach-shmobile: Emma Mobile EV2 SMP support V3 mach-shmobile: KZM9D board support V3 mach-shmobile: Emma Mobile EV2 SoC base support V3 gpio: Emma Mobile GPIO driver V2
2012-05-19regulator: tps65910: use devm_* for memory allocationLaxman Dewangan1-18/+9
use the devm_* apis for memory allocation. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-19regulator: tps65910: use small letter for regulator namesLaxman Dewangan1-52/+52
Use the small-letter for names of different regulator to match the names with dt binding documents. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-19mfd: tpx6586x: Depend on regulatorMark Brown1-0/+1
Some of the OF binding stuff is done in the MFD. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-19Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds9-30/+34
Pull block layer fixes from Jens Axboe: "A few small, but important fixes. Most of them are marked for stable as well - Fix failure to release a semaphore on error path in mtip32xx. - Fix crashable condition in bio_get_nr_vecs(). - Don't mark end-of-disk buffers as mapped, limit it to i_size. - Fix for build problem with CONFIG_BLOCK=n on arm at least. - Fix for a buffer overlow on UUID partition printing. - Trivial removal of unused variables in dac960." * 'for-linus' of git://git.kernel.dk/linux-block: block: fix buffer overflow when printing partition UUIDs Fix blkdev.h build errors when BLOCK=n bio allocation failure due to bio_get_nr_vecs() block: don't mark buffers beyond end of disk as mapped mtip32xx: release the semaphore on an error path dac960: Remove unused variables from DAC960_CreateProcEntries()
2012-05-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-2/+2
Pull one more networking bug-fix from David Miller: "One last straggler. Eric Dumazet's pktgen unload oops fix was not entirely complete, but all the cases should be handled properly now.... fingers crossed." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: pktgen: fix module unload for good
2012-05-19memcg,thp: fix res_counter:96 regressionHugh Dickins1-1/+1
Occasionally, testing memcg's move_charge_at_immigrate on rc7 shows a flurry of hundreds of warnings at kernel/res_counter.c:96, where res_counter_uncharge_locked() does WARN_ON(counter->usage < val). The first trace of each flurry implicates __mem_cgroup_cancel_charge() of mc.precharge, and an audit of mc.precharge handling points to mem_cgroup_move_charge_pte_range()'s THP handling in commit 12724850e806 ("memcg: avoid THP split in task migration"). Checking !mc.precharge is good everywhere else, when a single page is to be charged; but here the "mc.precharge -= HPAGE_PMD_NR" likely to follow, is liable to result in underflow (a lot can change since the precharge was estimated). Simply check against HPAGE_PMD_NR: there's probably a better alternative, trying precharge for more, splitting if unsuccessful; but this one-liner is safer for now - no kernel/res_counter.c:96 warnings seen in 26 hours. Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-19USB: EHCI: fix command register configuration lost problemMing Lei1-1/+0
The 3d9545cc375d117554a9b35dfddadf9189c62775(EHCI: maintain the ehci->command value properly) introducs one command register configuration lost problem by the below line in ehci_reset: ehci->command = ehci_readl(ehci, &ehci->regs->command); After writting RESET into command register, it is restored to its default value per EHCI spec[1], so the previous configuration will be lost, and may introduce some problems reported recently: - imx51 Babbage board detect usb hub failed[2], reported by Richard Zhao. - mouse and keyboard hangs in linux-next found by Dan Carpenter and Greg-KH. So this patch just removes the line to fix these problems, and keep configurating command register consistent as before the commit 3d9545cc(EHCI: maintain the ehci->command value properly). [1], 4.1 Host Controller Initialization of EHCI Specification 1.0 [2], failed dmesg log: usb 1-1: new high-speed USB device number 2 using mxc-ehci hub 1-1:1.0: USB hub found hub 1-1:1.0: 7 ports detected mxc-ehci mxc-ehci.1: fatal error mxc-ehci mxc-ehci.1: HC died; cleaning up mxc-ehci mxc-ehci.1: force halt; handshake f5780344 00004000 00004000 -> -110 mxc-ehci mxc-ehci.1: HC died; cleaning up usb 1-1: USB disconnect, device number 2 Reported-by: Richard Zhao <richard.zhao@freescale.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Chen Peter-B29397 <B29397@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-19Merge branch 'imx/pinctrl' into next/pinctrlOlof Johansson1-1/+1
* imx/pinctrl: mtd: nand: gpmi: fix compile error caused by pinctrl call
2012-05-19mtd: nand: gpmi: fix compile error caused by pinctrl callShawn Guo1-1/+1
Fix following compile error caused by commit 39febc0 (mtd: nand: gpmi: adopt pinctrl support). CC drivers/mtd/nand/gpmi-nand/gpmi-nand.o drivers/mtd/nand/gpmi-nand/gpmi-nand.c: In function ‘acquire_resources’: drivers/mtd/nand/gpmi-nand/gpmi-nand.c:499:45: error: ‘pdev’ undeclared (first use in this function) Reported-by: Subodh Nijsure <snijsure@grid-net.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-19tracing: Remove kernel_lock annotationsRichard Weinberger1-2/+0
The BKL is gone, these annotations are useless. Link: http://lkml.kernel.org/r/1320654202-4433-1-git-send-email-richard@nod.at Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-19tracing: Fix initial buffer_size_kb stateVaibhav Nagarnaik1-1/+2
Make sure that the state of buffer_size_kb is initialized correctly and returns actual size of the ring buffer. Link: http://lkml.kernel.org/r/1336066834-1673-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-19ring-buffer: Merge separate resize loopsVaibhav Nagarnaik1-26/+15
There are 2 separate loops to resize cpu buffers that are online and offline. Merge them to make the code look better. Also change the name from update_completion to update_done to allow shorter lines. Link: http://lkml.kernel.org/r/1337372991-14783-1-git-send-email-vnagarnaik@google.com Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-19regulator: regulator for Palmas KconfigGraeme Gregory2-0/+13
Add the Kconfig/Makefile stuff for the palmas regulator driver Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-19regulator: regulator driver for Palmas series chipsGraeme Gregory1-0/+822
Palmas has both Switched Mode (SMPS) and Linear (LDO) regulators in it. This regulator driver allows software control of these regulators. The regulators available on Palmas series chips vary depending on the muxing. This is handled automatically in the driver by reading the mux info from OTP. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-19ipv6: disable GSO on sockets hitting dst_allfragEric Dumazet1-1/+4
If the allfrag feature has been set on a host route (due to an ICMPv6 Packet Too Big received indicating a MTU of less than 1280), we hit a very slow behavior in TCP stack, because all big packets are dropped and only a retransmit timer is able to push one MSS frame every 200 ms. One way to handle this is to disable GSO on the socket the first time a super packet is dropped. Adding a specific dst_allfrag() in the fast path is probably overkill since the dst_allfrag() case almost never happen. Result on netperf TCP_STREAM, one flow : Before : 60 kbit/sec After : 1.6 Gbit/sec Reported-by: Tore Anderson <tore@fud.no> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Tore Anderson <tore@fud.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19tg3: use netdev_alloc_frag() APIEric Dumazet2-35/+5
Update our reference driver to use netdev_alloc_frag() API instead of the temporary custom allocator I introduced in commit 8d4057a938 (tg3: provide frags as skb head) This removes the memory leak we had, since we could leak one page at device dismantle. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Matt Carlson <mcarlson@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19net: napi_frags_skb() is staticEric Dumazet2-3/+1
No need to export napi_frags_skb() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19Merge branch 'board-specific' of git://github.com/hzhuang1/linux into ↵Olof Johansson12-45/+39
next/boards * 'board-specific' of git://github.com/hzhuang1/linux: ARM: pxa: hx4700: Add Synaptics NavPoint touchpad ARM: pxa: Use REGULATOR_SUPPLY macro
2012-05-19ppp: avoid false drop_monitor false positivesEric Dumazet5-13/+15
Call consume_skb() in place of kfree_skb() were appropriate. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19Merge branch 'soc-core' of ↵Olof Johansson1-3/+31
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas into next/soc Repeat pull of soc-core to bring in a bugfix. * 'soc-core' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas: ARM: mach-shmobile: sh73a0: fixup PINT/IRQ16-IRQ31 irq number conflict
2012-05-19ipv6: bool/const conversions phase2Eric Dumazet17-130/+131
Mostly bool conversions, some inline removals and const additions. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19ipx: Remove spurious NULL checking in ipx_ioctl().David S. Miller1-3/+1
We already unconditionally dereference 'sk' via lock_sock(sk) earlier in this function, and our caller (sock_do_ioctl()) makes takes similar liberties. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19ipv6: ip6_fragment() should check CHECKSUM_PARTIALEric Dumazet1-0/+4
Quoting Tore Anderson from : If the allfrag feature has been set on a host route (due to an ICMPv6 Packet Too Big received indicating a MTU of less than 1280), TCP SYN/ACK packets to that destination appears to get an incorrect TCP checksum. This in turn means they are thrown away as invalid. In the case of an IPv4 client behind a link with a MTU of less than 1260, accessing an IPv6 server through a stateless translator, this means that the client can only download a single large file from the server, because once it is in the server's routing cache with the allfrag feature set, new TCP connections can no longer be established. </endquote> It appears ip6_fragment() doesn't handle CHECKSUM_PARTIAL properly. As network drivers are not prepared to fetch correct transport header, a safe fix is to call skb_checksum_help() before fragmenting packet. Reported-by: Tore Anderson <tore@fud.no> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Tore Anderson <tore@fud.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19cirrus: cs89x0: Remove function prototypes and reorder declarationsJoe Perches1-746/+721
Move blocks of code around to avoid function prototypes. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19cirrus: cs89x0: Neaten debugging and loggingJoe Perches1-105/+82
Introduce and use a debug macro to test and print. Convert printks to pr_<level>. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19cirrus: cs89x0: Code neateningJoe Perches1-180/+272
Just some stylings. Use #include <linux... not #include <asm... Convert a test and print to a printk_once. Combine an "if (foo) { if (bar) {" to single "if (foo && bar) {" to save an indent level. Convert single line "if (foo) bar;" to multiple lines. Move some braces. Align some long lines a bit better. Long lines and printks with KERN_ checkpatch complaints still exist. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>