summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-03-19ipvs: remove extra rcu lockJulian Anastasov1-2/+0
In 3.7 we added code that uses ipv4_update_pmtu but after commit c5ae7d4192 (ipv4: must use rcu protection while calling fib_lookup) the RCU lock is not needed. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2013-03-19ipvs: add backup_only flag to avoid loopsJulian Anastasov4-4/+34
Dmitry Akindinov is reporting for a problem where SYNs are looping between the master and backup server when the backup server is used as real server in DR mode and has IPVS rules to function as director. Even when the backup function is enabled we continue to forward traffic and schedule new connections when the current master is using the backup server as real server. While this is not a problem for NAT, for DR and TUN method the backup server can not determine if a request comes from client or from director. To avoid such loops add new sysctl flag backup_only. It can be needed for DR/TUN setups that do not need backup and director function at the same time. When the backup function is enabled we stop any forwarding and pass the traffic to the local stack (real server mode). The flag disables the director function when the backup function is enabled. For setups that enable backup function for some virtual services and director function for other virtual services there should be another more complex solution to support DR/TUN mode, may be to assign per-virtual service syncid value, so that we can differentiate the requests. Reported-by: Dmitry Akindinov <dimak@stalker.com> Tested-by: German Myzovsky <lawyer@sipnet.ru> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2013-03-19arc: fix dma_address assignment during dma_map_sg()Pierrick Hascoet1-1/+1
Signed-off-by: Pierrick Hascoet <pierrick.hascoet@abilis.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-03-19ARM: OMAP5: clock: No Freqsel on OMAP5 devices tooRajendra Nayak1-6/+5
OMAP5 does not have freqsel either, so checks needs to be extended. Infact only OMAP343X devices has the freqsel support, so fix the check accordingly so that future patching can be avoided. Reported-by: Archit Taneja <archit@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2013-03-19ARM: OMAP5: Make errata i688 workaround availableSantosh Shilimkar2-1/+10
Errata i688 is also applicable for OMAP5 based devices. Update the code so that it can be enabled on OMAP5 devices. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2013-03-19ARM: OMAP5: Update SAR memory layout for WakeupGenSantosh Shilimkar1-7/+7
On OMAP5 es2 WakeupGen SAR register layout offset have changed. Update the layout accordingly. Reported-by: Menon, Nishanth <nm@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2013-03-19ARM: OMAP5: Update SAR RAM base addressSantosh Shilimkar2-2/+9
Update SAR RAM base address for OMAP5 based devices. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2013-03-19ARM: OMAP5: Reuse prm read_inst/write_instTero Kristo1-2/+2
Make use of 'prm_base' so that prm read_inst/write_inst can work on OMAP5 devices. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2013-03-19ARM: OMAP5: prm: Allow prm init to succeedSantosh Shilimkar1-1/+1
Allow prm init to succeed on OMAP5 SOCs. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2013-03-19ARM: OMAP5: timer: Update the clocksource name as per clock dataSantosh Shilimkar1-2/+3
OMAP5 clockdata has different sys clock node name. Fix the timer code to take care of it. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2013-03-19ARM: OMAP5: Update SOC id detection code for ES2Santosh Shilimkar2-3/+11
Update OMAP5 ES2 idcode and make ES2 as default detection. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2013-03-19ARM: imx: add dependency check for DEBUG_IMX_UART_PORTShawn Guo1-0/+1
While adding i.MX DEBUG_LL selection, commit f8c95fe (ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs) leaves Kconfig symbol DEBUG_IMX_UART_PORT there without any dependency check. This results in that everyone gets the symbol in their config, which is someting undesirable. Add "depends on ARCH_MXC" for the symbol to prevent that. Reported-by: Karl Beldan <karl.beldan@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-19drm/nv50/kms: prevent lockdep false-positive in page flipping pathBen Skeggs1-2/+2
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-19drm/nouveau/core: fix return value of nouveau_object_del()Ben Skeggs1-2/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-19ARM: video: mxs: Fix mxsfb misconfiguring VDCTRL0Marek Vasut3-16/+22
The issue fixed by this patch manifests only then using X11 with mxsfb driver. The X11 will display either shifted image or otherwise distorted image on the LCD. The problem is that the X11 tries to reconfigure the framebuffer and along the way calls fb_ops.fb_set_par() with X11's desired configuration values. The field of particular interest is fb_info->var.sync which contains non-standard values if configured by kernel. These are either FB_SYNC_DATA_ENABLE_HIGH_ACT, FB_SYNC_DOTCLK_FAILING_ACT or both, depending on the platform configuration. Both of these values are defined in the include/linux/mxsfb.h file. The driver interprets these values and configures the LCD controller accordingly. Yet X11 only has access to the standard values for this field defined in include/uapi/linux/fb.h and thus, unlike kernel, omits these special values. This results in distorted image on the LCD. This patch moves these non-standard values into new field of the mxsfb_platform_data structure so the driver can in turn check this field instead of the video mode field for these specific portions. Moreover, this patch prefixes these values with MXSFB_SYNC_ prefix instead of FB_SYNC_ prefix to prevent confusion of subsequent users. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Linux ARM <linux-arm-kernel@lists.infradead.org> Cc: Linux FBDEV <linux-fbdev@vger.kernel.org> Cc: Lothar Waßmann <LW@karo-electronics.de> Cc: Sascha Hauer <kernel@pengutronix.de> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-19Merge branch 'hwmon-for-linus' of ↵Linus Torvalds4-17/+12
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull hwmon fixes from Jean Delvare. * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (lm75) Fix tcn75 prefix hwmon: (lm75.h) Update header inclusion MAINTAINERS: Remove Mark M. Hoffman
2013-03-19sgy-cts1000: Remove __dev* attributesBen Collins1-3/+3
Somehow the driver snuck in with these still in it. Signed-off-by: Ben Collins <ben.c@servergy.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-19Merge branch 'for-3.9-fixes' of ↵Linus Torvalds1-19/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fix from Tejun Heo: "Lai's patch to fix highly unlikely but still possible workqueue stall during CPU hotunplug." * 'for-3.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: fix possible pool stall bug in wq_unbind_fn()
2013-03-19ipvs: fix sctp chunk length orderJulian Anastasov1-7/+9
Fix wrong but non-fatal access to chunk length. sch->length should be in network order, next chunk should be aligned to 4 bytes. Problem noticed in sparse output. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2013-03-19[media] ir: IR_RX51 only works on OMAP2Arnd Bergmann1-1/+1
This driver can be enabled on OMAP1 at the moment, which breaks allyesconfig for that platform. Let's mark it OMAP2PLUS-only in Kconfig, since that is the only thing it builds on. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Timo Kokkonen <timo.t.kokkonen@iki.fi> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-19Merge tag 'v3.9-rc3' into v4l_for_linusMauro Carvalho Chehab10483-271885/+524714
Linux 3.9-rc3 * tag 'v3.9-rc3': (11231 commits) Linux 3.9-rc3 perf,x86: fix link failure for non-Intel configs perf,x86: fix wrmsr_on_cpu() warning on suspend/resume Btrfs: fix warning of free_extent_map perf,x86: fix kernel crash with PEBS/BTS after suspend/resume ALSA: hda - Fix missing EAPD/GPIO setup for Cirrus codecs sound: sequencer: cap array index in seq_chn_common_event() mfd: twl4030-madc: Remove __exit_p annotation ALSA: hda/ca0132 - Remove extra setting of dsp_state. ALSA: hda/ca0132 - Check download state of DSP. ALSA: hda/ca0132 - Check if dspload_image succeeded. mm/fremap.c: fix possible oops on error path list: Fix double fetch of pointer in hlist_entry_safe() Btrfs: fix warning when creating snapshots Btrfs: return as soon as possible when edquot happens Btrfs: return EIO if we have extent tree corruption btrfs: use rcu_barrier() to wait for bdev puts at unmount Btrfs: remove btrfs_try_spin_lock Btrfs: get better concurrency for snapshot-aware defrag work hwmon: (pmbus/ltc2978) Fix temperature reporting ...
2013-03-19staging: zcache: fix typo "64_BIT"Paul Bolle1-1/+1
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-19Merge tag 'for-usb-linus-2013-03-18' of ↵Greg Kroah-Hartman1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus Sarah writes: xHCI bug fix for 3.9 Hi Greg, Here's one xHCI bug fix. We had two register bits flipped. Sarah Sharp
2013-03-19tcm_vhost: Flush vhost_work in vhost_scsi_flush()Asias He1-0/+1
We also need to flush the vhost_works. It is the completion vhost_work currently. Signed-off-by: Asias He <asias@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-19tcm_vhost: Add missed lock in vhost_scsi_clear_endpoint()Asias He1-4/+8
tv_tpg->tv_tpg_vhost_count should be protected by tv_tpg->tv_tpg_mutex. Signed-off-by: Asias He <asias@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-19nfsd: fix startup order in nfsd_reply_cache_initJeff Layton1-4/+4
If we end up doing "goto out_nomem" in this function, we'll call nfsd_reply_cache_shutdown. That will attempt to walk the LRU list and free entries, but that list may not be initialized yet if the server is starting up for the first time. It's also possible for the shrinker to kick in before we've initialized the LRU list. Rearrange the initialization so that the LRU list_head and cache size are initialized before doing any of the allocations that might fail. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-03-19KVM: x86: fix deadlock in clock-in-progress request handlingMarcelo Tosatti1-9/+9
There is a deadlock in pvclock handling: cpu0: cpu1: kvm_gen_update_masterclock() kvm_guest_time_update() spin_lock(pvclock_gtod_sync_lock) local_irq_save(flags) spin_lock(pvclock_gtod_sync_lock) kvm_make_mclock_inprogress_request(kvm) make_all_cpus_request() smp_call_function_many() Now if smp_call_function_many() called by cpu0 tries to call function on cpu1 there will be a deadlock. Fix by moving pvclock_gtod_sync_lock protected section outside irq disabled section. Analyzed by Gleb Natapov <gleb@redhat.com> Acked-by: Gleb Natapov <gleb@redhat.com> Reported-and-Tested-by: Yongjie Ren <yongjie.ren@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-03-19KVM: allow host header to be included even for !CONFIG_KVMKevin Hilman1-1/+6
The new context tracking subsystem unconditionally includes kvm_host.h headers for the guest enter/exit macros. This causes a compile failure when KVM is not enabled. Fix by adding an IS_ENABLED(CONFIG_KVM) check to kvm_host so it can be included/compiled even when KVM is not enabled. Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-03-19xen-blkfront: replace kmalloc and then memcpy with kmemdupMihnea Dobrescu-Balaur1-2/+1
The benefits are: * code is cleaner * kmemdup adds additional debugging info useful for tracking the real place where memory was allocated (CONFIG_DEBUG_SLAB). Signed-off-by: Mihnea Dobrescu-Balaur <mihneadb@gmail.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-19xen-blkback: fix dispatch_rw_block_io() error pathJan Beulich1-6/+1
Commit 7708992 ("xen/blkback: Seperate the bio allocation and the bio submission") consolidated the pendcnt updates to just a single write, neglecting the fact that the error path relied on it getting set to 1 up front (such that the decrement in __end_block_io_op() would actually drop the count to zero, triggering the necessary cleanup actions). Also remove a misleading and a stale (after said commit) comment. CC: stable@vger.kernel.org Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-19hwmon: (lm75) Fix tcn75 prefixJean Delvare1-1/+1
The TCN75 has its own prefix for a long time now. Signed-off-by: Jean Delvare <khali@linux-fr.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2013-03-19hwmon: (lm75.h) Update header inclusionJean Delvare1-1/+1
File lm75.h used to include <linux/hwmon.h> for SENSORS_LIMIT() but this function is gone by now. Instead we call clamp_val() so we should include <linux/kernel.h>, where this function is declared. Signed-off-by: Jean Delvare <khali@linux-fr.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2013-03-19MAINTAINERS: Remove Mark M. HoffmanJean Delvare2-15/+10
Mark M. Hoffman stopped working on the Linux kernel several years ago, so he should no longer be listed as a driver maintainer. I'm not even sure if his e-mail address still works. I can take over 3 drivers he was responsible for, the 4th one will fall down to the subsystem maintainer. Also give Mark credit for all the good work he did. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Cc: Wolfram Sang <wolfram@the-dreams.de>
2013-03-18target: fix possible memory leak in core_tpg_register()Wei Yongjun1-1/+2
'se_tpg->tpg_lun_list' is malloced in core_tpg_register() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. 'se_tpg' is malloced out of this function, and will be freed if we return error, so remove free for 'se_tpg'. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-18target/iscsi: Fix mutual CHAP auth on big-endian archesAndy Grover1-1/+4
See https://bugzilla.redhat.com/show_bug.cgi?id=916290 Used a temp var since we take its address in sg_init_one. Signed-off-by: Andy Grover <agrover@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-18target_core_sbc: use noop for SYNCHRONIZE_CACHEHannes Reinecke1-2/+5
Windows does not expect SYNCHRONIZE_CACHE to be not supported, and will generate a BSOD upon shutdown when using rd_mcp backend. So better use a noop here. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-03-18rtlwifi: usb: add missing freeing of skbuffJussi Kivilinna1-0/+1
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18mwifiex: cancel cmd timer and free curr_cmd in shutdown processBing Zhao1-0/+8
curr_cmd points to the command that is in processing or waiting for its command response from firmware. If the function shutdown happens to occur at this time we should cancel the cmd timer and put the command back to free queue. Cc: <stable@vger.kernel.org> # 3.8 Tested-by: Marco Cesarano <marco@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18mwifiex: skip pending commands after function shutdownBing Zhao1-3/+14
During rmmod mwifiex_sdio processing FUNC_SHUTDOWN command is sent to firmware. Firmware expcets only FUNC_INIT once WLAN function is shut down. Any command pending in the command queue should be ignored and freed. Cc: <stable@vger.kernel.org> # 3.8 Tested-by: Daniel Drake <dsd@laptop.org> Tested-by: Marco Cesarano <marco@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18mwifiex: fix race when queuing commandsAmitkumar Karwar4-17/+10
Running the following script repeatedly on XO-4 with SD8787 produces command timeout and system lockup. insmod mwifiex_sdio.ko sleep 1 ifconfig eth0 up iwlist eth0 scan & sleep 0.5 rmmod mwifiex_sdio mwifiex_send_cmd_async() is called for sync as well as async commands. (mwifiex_send_cmd_sync() internally calls it for sync command.) "adapter->cmd_queued" gets filled inside mwifiex_send_cmd_async() routine for both types of commands. But it is used only for sync commands in mwifiex_wait_queue_complete(). This could lead to a race when two threads try to queue a sync command with another sync/async command simultaneously. Get rid of global variable and pass command node as a parameter to mwifiex_wait_queue_complete() to fix the problem. Cc: <stable@vger.kernel.org> # 3.8 Reported-by: Daniel Drake <dsd@laptop.org> Tested-by: Daniel Drake <dsd@laptop.org> Tested-by: Marco Cesarano <marco@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18ath9k: limit tx path hang check to normal data queuesFelix Fietkau1-13/+13
The beacon and multicast-buffer queues are managed by the beacon tasklet, and the generic tx path hang check does not help in any way here. Running it on those queues anyway can introduce some race conditions leading to unnecessary chip resets. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18ath9k_hw: revert chainmask to user configuration after calibrationFelix Fietkau1-0/+4
The commit 'ath9k_hw: fix calibration issues on chainmask that don't include chain 0' changed the hardware chainmask to the chip chainmask for the duration of the calibration, but the revert to user configuration in the reset path runs too early. That causes some issues with limiting the number of antennas (including spurious failure in hardware-generated packets). Fix this by reverting the chainmask after the essential parts of the calibration that need the workaround, and before NF calibration is run. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Tested-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18iwl3945: fix length of dma buffersStanislaw Gruszka1-10/+12
commit bdb084b22d8aee66c87af5e9c36bd6cf7f3bccfd Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Wed Feb 13 15:49:08 2013 +0100 iwlegacy: more checks for dma mapping errors broke il3945_tx_skb() dma buffer length settings, what results on firmware errors like showed below and make 3945 device non usable. iwl3945 0000:02:00.0: Microcode SW error detected. Restarting 0x82000008. iwl3945 0000:02:00.0: Loaded firmware version: 15.32.2.9 iwl3945 0000:02:00.0: Start IWL Error Log Dump: iwl3945 0000:02:00.0: Status: 0x000202E4, count: 1 iwl3945 0000:02:00.0: Desc Time asrtPC blink2 ilink1 nmiPC Line iwl3945 0000:02:00.0: SYSASSERT (0x5) 0000208934 0x008B6 0x0035E 0x00320 0x00000 267 iwl3945 0000:02:00.0: Error Reply type 0x00000001 cmd Reported-by: Zdenek Kabelac <zkabelac@redhat.com> Reported-by: Krzysztof Kolasa <kkolasa@winsoft.pl> Reported-by: Pedro Francisco <pedrogfrancisco@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-18Merge branch 'master' of ↵John W. Linville3-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
2013-03-18nfsd: only unhash DRC entries that are in the hashtableJeff Layton1-1/+2
It's not safe to call hlist_del() on a newly initialized hlist_node. That leads to a NULL pointer dereference. Only do that if the entry is hashed. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-03-18xfs: ensure we capture IO errors correctlyDave Chinner1-0/+6
Failed buffer readahead can leave the buffer in the cache marked with an error. Most callers that then issue a subsequent read on the buffer do not zero the b_error field out, and so we may incorectly detect an error during IO completion due to the stale error value left on the buffer. Avoid this problem by zeroing the error before IO submission. This ensures that the only IO errors that are detected those captured from are those captured from bio submission or completion. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit c163f9a1760229a95d04e37b332de7d5c1c225cd)
2013-03-18xfs: fix xfs_iomap_eof_prealloc_initial_size typeMark Tinguely1-1/+1
Fix the return type of xfs_iomap_eof_prealloc_initial_size() to xfs_fsblock_t to reflect the fact that the return value may be an unsigned 64 bits if XFS_BIG_BLKNOS is defined. Signed-off-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit e8108cedb1c5d1dc359690d18ca997e97a0061d2)
2013-03-18x86-64: Fix the failure case in copy_user_handle_tail()CQ Tang1-2/+2
The increment of "to" in copy_user_handle_tail() will have incremented before a failure has been noted. This causes us to skip a byte in the failure case. Only do the increment when assured there is no failure. Signed-off-by: CQ Tang <cq.tang@intel.com> Link: http://lkml.kernel.org/r/20130318150221.8439.993.stgit@phlsvslse11.ph.intel.com Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org>
2013-03-18xfs: fix potential infinite loop in xfs_iomap_prealloc_size()Brian Foster1-1/+1
If freesp == 0, we could end up in an infinite loop while squashing the preallocation. Break the loop when we've killed the prealloc entirely. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit e78c420bfc2608bb5f9a0b9165b1071c1e31166a)
2013-03-18tcp: dont handle MTU reduction on LISTEN socketEric Dumazet2-7/+14
When an ICMP ICMP_FRAG_NEEDED (or ICMPV6_PKT_TOOBIG) message finds a LISTEN socket, and this socket is currently owned by the user, we set TCP_MTU_REDUCED_DEFERRED flag in listener tsq_flags. This is bad because if we clone the parent before it had a chance to clear the flag, the child inherits the tsq_flags value, and next tcp_release_cb() on the child will decrement sk_refcnt. Result is that we might free a live TCP socket, as reported by Dormando. IPv4: Attempt to release TCP socket in state 1 Fix this issue by testing sk_state against TCP_LISTEN early, so that we set TCP_MTU_REDUCED_DEFERRED on appropriate sockets (not a LISTEN one) This bug was introduced in commit 563d34d05786 (tcp: dont drop MTU reduction indications) Reported-by: dormando <dormando@rydia.net> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 16:26:24 +0300