summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-04-05ARM: dts: genmai: Enable rtc and rtc_x1 clockJacopo Mondi1-0/+8
Enable the 32.768 kHz RTC_X1 clock by setting the frequency value to non-zero and enable the realtime clock. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-04-04ARM: dts: rskrza1: add rtc DT supportChris Brandt1-0/+4
Enable the realtime clock. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-04-04ARM: dts: rskrza1: set rtc_x1 clock valueChris Brandt1-0/+4
Enable the 32.768 kHz RTC_X1 clock by setting the frequency value to non-zero. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-04-04ARM: dts: r7s72100: add rtc to device treeChris Brandt1-0/+14
Add the realtime clock device node. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-04-04ARM: dts: r7s72100: add RTC_X clock inputs to device treeChris Brandt1-0/+14
Add the RTC clocks to device tree. The frequencies must be fixed values according to the hardware manual. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-04-04ARM: dts: r7s72100: add rtc clock to device treeChris Brandt2-0/+12
Add the realtime clock functional clock source. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-04-04ARM: dts: koelsch: Correct clock frequency of X2 DU clock inputGeert Uytterhoeven1-1/+1
The X2 crystal oscillator on the Koelsch development board provides a 74.25 MHz clock, not a 148.5 MHz clock. Fixes: cd21cb46e14aae3a ("ARM: shmobile: koelsch: Add DU external pixel clocks to DT") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-04-03ARM: dts: r8a7794: Add Z2 clockGeert Uytterhoeven1-0/+8
Add the Z2 clock (Cortex-A7 CPU core clock), which uses a fixed divider, and link the first CPU node to it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-04-03ARM: dts: r8a7792: Correct Z clockGeert Uytterhoeven2-3/+9
Unlike other R-Car Gen2 SoCs with Cortex-A15 CPU cores, R-Car V2H does not have a programmable Z clock (Cortex-A15 CPU core clock), but uses a fixed divider. This is similar to the Z2 clock (Cortex-A7 CPU core clock) on R-Car E2. Hence: - Remove the Z clock output from the cpg_clocks node, as this implied a programmable clock, - Add the Z clock as a fixed factor clock, - Let the first CPU node point to the new Z clock, - Remove the Z clock index from the bindings (this definition was used by r8a7792.dtsi only, and was not a contract between DT and driver). Fixes: 7c4163aae3d8e5b9 ("ARM: dts: r8a7792: initial SoC device tree") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-04-03ARM: dts: r8a7793: Correct parent of SSI[0-9] clocksGeert Uytterhoeven1-2/+5
The SSI-ALL gate clock is located in between the P clock and the individual SSI[0-9] clocks, hence the former should be listed as their parent. Fixes: 072d326542e49187 ("ARM: dts: r8a7793: add MSTP10 clocks to device tree") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-04-03ARM: dts: r8a7791: Correct parent of SSI[0-9] clocksGeert Uytterhoeven1-2/+5
The SSI-ALL gate clock is located in between the P clock and the individual SSI[0-9] clocks, hence the former should be listed as their parent. Fixes: ee9141522dcf13f8 ("ARM: shmobile: r8a7791: add MSTP10 support on DTSI") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-04-03ARM: dts: r8a7790: Correct parent of SSI[0-9] clocksGeert Uytterhoeven1-2/+5
The SSI-ALL gate clock is located in between the P clock and the individual SSI[0-9] clocks, hence the former should be listed as their parent. Fixes: bcde372254386872 ("ARM: shmobile: r8a7790: add MSTP10 support on DTSI") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-04-03ARM: dts: r7s72100: fix ethernet clock parentChris Brandt1-1/+1
Technically, the Ethernet block is run off the 133MHz Bus (B) clock, not the 33MHz Peripheral 0 (P0) clock. Fixes: 969244f9c720 ("ARM: dts: r7s72100: add ethernet clock to device tree") Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-28ARM: dts: silk: Correct clock of DU1Geert Uytterhoeven1-1/+1
The second channel of the display unit uses a different module clock than the first channel. Fixes: 84e734f497cd48f6 ("ARM: dts: silk: add DU DT support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-28ARM: dts: alt: Correct clock of DU1Geert Uytterhoeven1-1/+1
The second channel of the display unit uses a different module clock than the first channel. Fixes: 876e7fb9f418fd86 ("ARM: shmobile: r8a7794: alt: Enable VGA port") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-28ARM: dts: r8a7794: Correct clock of DU1Geert Uytterhoeven1-1/+1
The second channel of the display unit uses a different module clock than the first channel. Fixes: 46c4f13d04d729fa ("ARM: shmobile: r8a7794: Add DU node to device tree") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-28ARM: dts: r8a7794: Add DU1 clock to device treeGeert Uytterhoeven2-3/+6
Add the missing module clock for the second channel of the display unit. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-24ARM: dts: r7s72100: add power-domains to sdhiChris Brandt1-0/+2
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Fixes: 66474697923c ("ARM: dts: r7s72100: add sdhi to device tree") Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-21ARM: dts: r8a7745: Add reset control propertiesGeert Uytterhoeven1-0/+24
Add properties to describe the reset topology for on-SoC devices: - Add the "#reset-cells" property to the CPG/MSSR device node, - Add resets and reset-names properties to the various device nodes. This allows to reset SoC devices using the Reset Controller API. Note that all resets added match the corresponding module clocks. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-21ARM: dts: r8a7743: Add reset control propertiesGeert Uytterhoeven1-0/+24
Add properties to describe the reset topology for on-SoC devices: - Add the "#reset-cells" property to the CPG/MSSR device node, - Add resets and reset-names properties to the various device nodes. This allows to reset SoC devices using the Reset Controller API. Note that all resets added match the corresponding module clocks. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-13ARM: dts: silk: Drop superfluous status update for frequency overrideGeert Uytterhoeven1-1/+0
The scif_clk device node is already enabled in r8a7794.dtsi, so there is no need to update its status again. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-13ARM: dts: alt: Drop superfluous status update for frequency overrideGeert Uytterhoeven1-1/+0
The scif_clk device node is already enabled in r8a7794.dtsi, so there is no need to update its status again. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-13ARM: dts: gose: Drop superfluous status update for frequency overrideGeert Uytterhoeven1-1/+0
The scif_clk device node is already enabled in r8a7793.dtsi, so there is no need to update its status again. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-13ARM: dts: porter: Drop superfluous status update for frequency overrideGeert Uytterhoeven1-1/+0
The pcie_bus_clk device node is already enabled in r8a7791.dtsi, so there is no need to update its status again. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-13ARM: dts: koelsch: Drop superfluous status updates for frequency overridesGeert Uytterhoeven1-2/+0
The scif_clk and pcie_bus_clk device nodes are already enabled in r8a7791.dtsi, so there is no need to update their statuses again. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-13ARM: dts: lager: Drop superfluous status update for frequency overrideGeert Uytterhoeven1-1/+0
The scif_clk device node is already enabled in r8a7790.dtsi, so there is no need to update its status again. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-13ARM: dts: marzen: Drop superfluous status update for frequency overrideGeert Uytterhoeven1-1/+0
The scif_clk device node is already enabled in r8a7779.dtsi, so there is no need to update its status again. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-13ARM: dts: bockw: Drop superfluous status update for frequency overrideGeert Uytterhoeven1-1/+0
The scif_clk device node is already enabled in r8a7778.dtsi, so there is no need to update its status again. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-13ARM: dts: porter: Always use status "okay" to enable devicesGeert Uytterhoeven1-2/+2
While status "ok" does work, the canonical form is "okay", so update the few places that used the former. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-13ARM: dts: r8a7793: Add INTC-SYS clock to device treeGeert Uytterhoeven2-5/+11
Link the ARM GIC to the INTC-SYS module clock, and add it to the "always on" PM Domain, so it can be power managed using that clock. Note that currently the GIC-400 driver doesn't support module clocks nor Runtime PM, so this must be handled as a critical clock. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-10ARM: dts: r8a7793: Tidyup Audio-DMAC channel for DVCKuninori Morimoto1-2/+2
Current Audio-DMAC is assigned "rx" as Audio-DMAC0, "tx" as Audio-DMAC1. Thus, DVC "tx" should be assigned as Audio-DMAC1, instead of Audio-DMAC0. Because of this, current platform board (using SRC/DVC/SSI) Playback/Capture both will use same Audio-DMAC0 (but it depends on audio data path). First note is that this "rx" and "tx" are from each IP point, it doesn't mean Playback/Capture. Second note is that Audio DMAC assigned on DT is only for Audio-DMAC, Audio-DMAC-peri-peri has no entry. => Audio-DMAC -> Audio-DMAC-peri-peri -- HW connection Playback case [Mem] => [SRC]--[DVC] -> [SSI]--[Codec] rx ~~~~~~~~~~~~ Capture [Mem] <= [DVC]--[SRC] <- [SSI]--[Codec] tx ~~~~~~~~~~~~ Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-10ARM: dts: r8a7791: Tidyup Audio-DMAC channel for DVCKuninori Morimoto1-2/+2
Current Audio-DMAC is assigned "rx" as Audio-DMAC0, "tx" as Audio-DMAC1. Thus, DVC "tx" should be assigned as Audio-DMAC1, instead of Audio-DMAC0. Because of this, current platform board (using SRC/DVC/SSI) Playback/Capture both will use same Audio-DMAC0 (but it depends on audio data path). First note is that this "rx" and "tx" are from each IP point, it doesn't mean Playback/Capture. Second note is that Audio DMAC assigned on DT is only for Audio-DMAC, Audio-DMAC-peri-peri has no entry. => Audio-DMAC -> Audio-DMAC-peri-peri -- HW connection Playback case [Mem] => [SRC]--[DVC] -> [SSI]--[Codec] rx ~~~~~~~~~~~~ Capture [Mem] <= [DVC]--[SRC] <- [SSI]--[Codec] tx ~~~~~~~~~~~~ Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-10ARM: dts: r8a7794: Add INTC-SYS clock to device treeGeert Uytterhoeven2-3/+7
Link the ARM GIC to the INTC-SYS module clock, and add it to the "always on" PM Domain, so it can be power managed using that clock. Note that currently the GIC-400 driver doesn't support module clocks nor Runtime PM, so this must be handled as a critical clock. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-10ARM: dts: r8a7792: Add INTC-SYS clock to device treeGeert Uytterhoeven2-3/+9
Link the ARM GIC to the INTC-SYS module clock, and add it to the "always on" PM Domain, so it can be power managed using that clock. Note that currently the GIC-400 driver doesn't support module clocks nor Runtime PM, so this must be handled as a critical clock. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-10ARM: dts: r8a7791: Add INTC-SYS clock to device treeGeert Uytterhoeven2-3/+7
Link the ARM GIC to the INTC-SYS module clock, and add it to the "always on" PM Domain, so it can be power managed using that clock. Note that currently the GIC-400 driver doesn't support module clocks nor Runtime PM, so this must be handled as a critical clock. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-10ARM: dts: r8a7790: Add INTC-SYS clock to device treeGeert Uytterhoeven2-3/+7
Link the ARM GIC to the INTC-SYS module clock, and add it to the "always on" PM Domain, so it can be power managed using that clock. Note that currently the GIC-400 driver doesn't support module clocks nor Runtime PM, so this must be handled as a critical clock. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-10ARM: dts: r8a73a4: Add INTC-SYS clock to device treeGeert Uytterhoeven2-4/+10
Link the ARM GIC to the INTC-SYS module clock and the C4 power domain, so it can be power managed using that clock in the future. Note that currently the GIC-400 driver doesn't support module clocks nor Runtime PM, so this must be handled as a critical clock. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-10ARM: dts: r7s72100: Add watchdog timerChris Brandt1-0/+7
Add watchdog timer support for RZ/A1. For the RZ/A1, the only way to do a reset is to overflow the WDT, so this is useful even if you don't need the watchdog functionality. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-07ARM: dts: r8a7790: Tidyup Audio-DMAC channel for DVCKuninori Morimoto1-2/+2
Current Audio-DMAC is assigned "rx" as Audio-DMAC0, "tx" as Audio-DMAC1. Thus, DVC "tx" should be assigned as Audio-DMAC1, instead of Audio-DMAC0. Because of this, current platform board (using SRC/DVC/SSI) Playback/Capture both will use same Audio-DMAC0 (but it depends on data path). First note is that this "rx" and "tx" are from each IP point, it doesn't mean Playback/Capture. Second note is that Audio DMAC assigned on DT is only for Audio-DMAC, Audio-DMAC-peri-peri has no entry. => Audio-DMAC -> Audio-DMAC-peri-peri -- HW connection Playback case [Mem] => [SRC]--[DVC] -> [SSI]--[Codec] rx ~~~~~~~~~~~~ Capture [Mem] <= [DVC]--[SRC] <- [SSI]--[Codec] tx ~~~~~~~~~~~~ Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-07ARM: dts: r8a7794: Remove unit-address and reg from integrated cacheGeert Uytterhoeven1-2/+1
The Cortex-A7 cache controller is an integrated controller, and thus the device node representing it should not have a unit-addresses or reg property. Fixes: 34ea4b4a827b4ee7 ("ARM: dts: r8a7794: Fix W=1 dtc warnings") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-07ARM: dts: r8a7793: Remove unit-address and reg from integrated cacheGeert Uytterhoeven1-2/+1
The Cortex-A15 cache controller is an integrated controller, and thus the device node representing it should not have a unit-addresses or reg property. Fixes: ad53f5f00b095a0d ("ARM: dts: r8a7793: Fix W=1 dtc warnings") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-07ARM: dts: r8a7792: Remove unit-address and reg from integrated cacheGeert Uytterhoeven1-2/+1
The Cortex-A15 cache controller is an integrated controller, and thus the device node representing it should not have a unit-addresses or reg property. Fixes: 7c4163aae3d8e5b9 ("ARM: dts: r8a7792: initial SoC device tree") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-07ARM: dts: r8a7791: Remove unit-address and reg from integrated cacheGeert Uytterhoeven1-2/+1
The Cortex-A15 cache controller is an integrated controller, and thus the device node representing it should not have a unit-addresses or reg property. Fixes: 6f9314ce258c8504 ("ARM: dts: r8a7791: Fix W=1 dtc warnings") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-07ARM: dts: r8a7790: Remove unit-addresses and regs from integrated cachesGeert Uytterhoeven1-4/+2
The Cortex-A15/A7 cache controllers are integrated controllers, and thus the device nodes representing them should not have unit-addresses or reg properties. Fixes: 2c3de36700d4f3a5 ("ARM: dts: r8a7790: Fix W=1 dtc warnings") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-07ARM: dts: r8a7745: Remove unit-address and reg from integrated cacheGeert Uytterhoeven1-2/+1
The Cortex-A7 cache controller is an integrated controller, and thus the device node representing it should not have a unit-addresses or reg property. Fixes: c95360247bdd67d3 ("ARM: dts: r8a7745: initial SoC device tree") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-07ARM: dts: r8a7743: Remove unit-address and reg from integrated cacheGeert Uytterhoeven1-2/+1
The Cortex-A15 cache controller is an integrated controller, and thus the device node representing it should not have a unit-addresses or reg property. Fixes: 34e8d993a68ae459 ("ARM: dts: r8a7743: initial SoC device tree") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-07ARM: dts: r8a73a4: Remove unit-addresses and regs from integrated cachesGeert Uytterhoeven1-4/+2
The Cortex-A15/A7 cache controllers are integrated controllers, and thus the device nodes representing them should not have unit-addresses or reg properties. Fixes: b0da45c60d2f7b08 ("ARM: dts: r8a73a4: Fix W=1 dtc warnings") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-06ARM: dts: renesas: Switch from ARCH_SHMOBILE_MULTI to ARCH_RENESASGeert Uytterhoeven1-19/+19
Commit 9b5ba0df4ea4 ("ARM: shmobile: Introduce ARCH_RENESAS") started the migration from ARCH_SHMOBILE_MULTI to ARCH_RENESAS. Update the Makefile to build DTBs for Renesas platforms to use the new symbol, and move the Renesas section to preserve sort order. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-06ARM: dts: r8a7745: Fix SCIFB0 dmas indentationGeert Uytterhoeven1-1/+1
Fixes: e0d2da54c4d01ba2 ("ARM: dts: r8a7745: add [H]SCIF{|A|B} support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-03-06ARM: dts: r8a7743: Fix SCIFB0 dmas indentationGeert Uytterhoeven1-1/+1
Fixes: 809c013426914694 ("ARM: dts: r8a7743: add [H]SCIF{A|B} support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 00:49:15 +0300