summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-08-08OMAPDSS: DSI: fix depopulating dsi peripheralsTomi Valkeinen1-8/+1
After v3.16-rc1, devices populated with of_platform_populate() should be depopulated using of_platform_depopulate(). Failure to do so prevents the devices from being populated again (e.g. when loading a module). This patch fixes the problem for the OMAP DSI driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-04Merge branch '3.17/hdmi-infoframe' into for-nextTomi Valkeinen16-692/+242
2014-08-04video: hyperv: hyperv_fb: refresh the VM screen by force on VM panicDexuan Cui1-3/+59
Currently the VSC has no chance to notify the VSP of the dirty rectangle on VM panic because the notification work is done in a workqueue, and in panic() the kernel typically ends up in an infinite loop, and a typical kernel config has CONFIG_PREEMPT_VOLUNTARY=y and CONFIG_PREEMPT is not set, so a context switch can't happen in panic() and the workqueue won't have a chance to run. As a result, the VM Connection window can't refresh until it's closed and we re-connect to the VM. We can register a handler on panic_notifier_list: the handler can notify the VSC and switch the framebuffer driver to a "synchronous mode", meaning the VSC flushes any future framebuffer change to the VSP immediately. v2: removed the MS-TFS line in the commit message v3: remove some 'unlikely' markings v4: avoid global variables as Tomi Valkeinen suggested Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-04video: ARM CLCD: Fix DT-related build problemsPawel Moll2-1/+2
This patch fixes the following error when !CONFIG_OF: drivers/video/fbdev/amba-clcd.c:800:54: warning: ‘struct amba_dev’ declared inside parameter list [enabled by default] static struct clcd_board *clcdfb_of_get_board(struct amba_dev *dev) ^ and adds a missing Kconfig select causing this when CONFIG_OF && !CONFIG_FB_MODE_HELPERS: drivers/video/fbdev/amba-clcd.c:567: undefined reference to `fb_videomode_from_videomode' Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-30drivers: video: fbdev: atmel_lcdfb.c: Add ability to inverted backlight PWM.Michael Welling2-1/+3
The code has a variable to change the polarity of the PWM backlight control but it was not being initialized. This patch adds a devicetree entry to set the variable if required. Signed-off-by: Michael Welling <mwelling@ieee.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-29video: ARM CLCD: Add DT supportPawel Moll3-0/+373
This patch adds basic DT bindings for the PL11x CLCD cells and make their fbdev driver use them. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04drm/omap: Add infoframe & dvi/hdmi mode supportTomi Valkeinen3-0/+40
Make the omapdrm driver use the new HDMI ops when possible. omapdrm will call set_hdmi_mode (when available) to tell the encoder driver whether the monitor is a DVI or HDMI monitor, and if it's an HDMI monitor, omapdrm will call set_hdmi_infoframe to to set the AVI infoframe. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Rob Clark <robdclark@gmail.com>
2014-07-04OMAPDSS: HDMI: remove the unused codeTomi Valkeinen2-327/+0
We no longer need the horrible driver internal videmode tables, which were used to decide if a given videomode is a HDMI or DVI mode. So remove all related code. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04OMAPDSS: HDMI5: add support to set infoframe & HDMI modeTomi Valkeinen2-56/+33
Instead of using hardcoded AVI infoframe, and a custom HDMI/DVI mode selection based in internal videomode tables, add support to set the infoframe and HDMI/DVI mode. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04OMAPDSS: HDMI4: add support to set infoframe & HDMI modeTomi Valkeinen2-74/+41
Instead of using hardcoded AVI infoframe, and a custom HDMI/DVI mode selection based in internal videomode tables, add support to set the infoframe and HDMI/DVI mode. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04OMAPDSS: HDMI: add infoframe and hdmi_dvi_mode fieldsTomi Valkeinen1-0/+2
Add infoframe and hdmi_dvi_mode fields to 'struct hdmi_config' which will be used in the following patches for OMAP4 and OMAP5 HDMI. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04OMAPDSS: add hdmi ops to hdmi-connector and tpd12s015Tomi Valkeinen2-0/+39
Add pass-through functions for set_infoframe and set_hdmi_mode to hdmi-connector and tpd12s015 drivers. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04OMAPDSS: add hdmi ops to hdmi_ops and omap_dss_driverTomi Valkeinen1-0/+9
Add two new ops for HDMI: set_infoframe() and set_hdmi_mode(). The first one can be used to specify the infoframe that should be sent to the HDMI monitor, and the second one is used to enable HDMI mode (versus DVI mode). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04OMAPDSS: HDMI: remove custom avi infoframeTomi Valkeinen1-90/+0
We now use the common AVI infoframe support, so the OMAP specific AVI infoframe code can be removed. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04OMAPDSS: HDMI5: use common AVI infoframe supportTomi Valkeinen1-57/+65
Instead of using OMAP specific AVI infoframe structs, use the common one from include/linux/hdmi.h. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04OMAPDSS: HDMI4: use common AVI infoframe supportTomi Valkeinen3-111/+28
Instead of using OMAP specific AVI infoframe structs, use the common one from include/linux/hdmi.h. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04OMAPDSS: Kconfig: select HDMITomi Valkeinen1-0/+1
Select HDMI support to be able to use HDMI infoframe helpers. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04OMAPDSS: HDMI: fix name conflictTomi Valkeinen1-2/+2
OMAP HDMI driver has an 'enum hdmi_audio_sample_size', which conflicts with the common include/linux/hdmi.h. Change the name of the OMAP specific enum with '_omap" postfix. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04OMAPDSS: DISPC: clean up dispc_mgr_timings_okTomi Valkeinen1-8/+10
dispc_mgr_timings_ok() is a bit confusing how it handles the return value. Change the function to just return immediately when a timing is deemed not valid, making the code much easier to follow. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04OMAPDSS: DISPC: reject interlace for lcd outTomi Valkeinen1-0/+3
OMAP2/3 does not support interlace for LCD out. OMAP4+ does, but is not supported by the driver at the moment. The driver still accepts interlaced mode for LCD out, causing broken display output. This patch makes dispc reject interlace for LCD out. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04OMAPDSS: DISPC: fix debugfs reg dumpTomi Valkeinen1-3/+0
DISPC reg dump prints a few registers twice. Remove the extra prints. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04video: clps711x: Fix sparse warningsAlexander Shiyan1-1/+1
This patch fixes below warning: drivers/video/fbdev/clps711x-fb.c:314:17: warning: incorrect type in initializer (different address spaces) drivers/video/fbdev/clps711x-fb.c:314:17: expected void *__p drivers/video/fbdev/clps711x-fb.c:314:17: got char [noderef] <asn:2>*screen_base Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04video: clps711x: Fix driver build for CONFIG_FB=mAlexander Shiyan1-1/+1
This patch fixes building CLPS711X FB driver if the framebuffer core is used as a module. LD init/built-in.o drivers/built-in.o: In function `clps711x_fb_remove': :(.text+0x44a8): undefined reference to `unregister_framebuffer' drivers/built-in.o: In function `clps711x_fb_probe': :(.text+0x44cc): undefined reference to `fb_get_options' :(.text+0x45d8): undefined reference to `fb_alloc_cmap' :(.text+0x45e4): undefined reference to `register_framebuffer' make: *** [vmlinux] Error 1 Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-01MAINTAINERS: Update Framebuffer file patternsJingoo Han1-37/+37
Since the commit f7018c2 "video: move fbdev to drivers/video/fbdev", all framebuffer drivers were moved to fbdev directory. Thus, file patterns of these framebuffer drivers should be updated correctly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-01video: fbdev: s3c2410fb: Move to clk_prepare_enable/clk_disable_unprepareVasily Khoruzhick1-5/+5
Use clk_prepare_enable/clk_disable_unprepare to make the driver work properly with common clock framework. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-01fbdev: arm has __raw I/O accessors, use them in fb.hArchit Taneja1-1/+1
This removes the sparse warnings on arm platforms: warning: cast removes address space of expression Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: H Hartley Sweeten <hsweeten at visionengravers.com> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Russell King <linux@arm.linux.org.uk>
2014-07-01drivers/video/fbdev/sis: Add missing elseRasmus Villemoes1-1/+1
The surrounding code and the fact that the previous two if's are rendered useless without this "else" (since SIS_340==55 and XGI_20==75 are greater than SIS_661==15) suggests that the "else" is indeed missing. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-01fbdev: da8xx-fb: Use dma_zalloc_coherentJoe Perches1-6/+3
Use the zeroing function instead of dma_alloc_coherent & memset(,0,) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-01video/mbx: indent some if statementsDan Carpenter1-2/+2
Checkpatch.pl worries that we have left off the conditional bit because it isn't indented correctly. WARNING: suspect code indent for conditional statements (24, 24) Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-26drivers/video/fbdev : dereference without an error testHimangi Saraogi1-0/+5
After a variable is assigned the result of backlight_device_register, an error test should be performed before a dereference. A simplified version of the semantic match that finds this problem is as follows: // <smpl> @def0@ expression x; position p0; @@ x@p0 = backlight_device_register(...) @protected@ expression def0.x,E; position def0.p0; position p; statement S; @@ x@p0 ... when != x = E if (!IS_ERR(x) && ...) {<... x@p ...>} else S @unprotected@ expression def0.x,E; identifier fld; position def0.p0; position p != protected.p; @@ x@p0 ... when != x = E * x@p->fld // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-24drivers/video/fbdev/sis/sis_main.c: remove unnecessary test on unsigned valueFabian Frederick1-4/+0
unsigned value is never < 0 Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-24video: 68328fb: remove check for CONFIG_FB_68328_INVERTPaul Bolle1-7/+1
Since v2.6.7 the 68328 frame buffer driver contains a check for CONFIG_FB_68328_INVERT. But the Kconfig symbol FB_68328_INVERT was never added to the tree. Remove this check and do some related cleaning up. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-24video: vt8500lcdfb: Remove kfree call since devm_kzalloc() is usedEmil Goode1-2/+0
We use devm_kzalloc() to allocate memory for the struct vt8500lcd_info pointer fbi, so there is no need to free it in vt8500lcd_remove(). Signed-off-by: Emil Goode <emilgoode@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-24video: msm: Introduce the use of the managed version of kzallocHimangi Saraogi1-16/+3
This patch moves data allocated using kzalloc to managed data allocated using devm_kzalloc and cleans now unnecessary kfrees in probe and remove functions. Also, linux/device.h is added to make sure the devm_*() routine declarations are unambiguously available. The function mddi_dummy_remove is removed as it is no longer required after removing the kfree. The variable ret is also done away with. The following Coccinelle semantic patch was used for making a part of the change: @platform@ identifier p, probefn, removefn; @@ struct platform_driver p = { .probe = probefn, .remove = removefn, }; @prb@ identifier platform.probefn, pdev; expression e, e1, e2; @@ probefn(struct platform_device *pdev, ...) { <+... - e = kzalloc(e1, e2) + e = devm_kzalloc(&pdev->dev, e1, e2) ... ?-kfree(e); ...+> } @rem depends on prb@ identifier platform.removefn; expression e; @@ removefn(...) { <... - kfree(e); ...> } Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-24video: clps711x: Add bindings documentation for CLPS711X framebufferAlexander Shiyan1-0/+47
Add OF document for Cirrus Logic CLPS711X framebuffer driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-24video: clps711x: Add new Cirrus Logic CLPS711X framebuffer driverAlexander Shiyan3-6/+415
This adds support for the framebuffer available in the Cirrus Logic CLPS711X CPUs. FB features: - 1-2-4 bits per pixel. - Programmable panel size to a maximum of 1024x256 at 4 bps. - Relocatible Frame Buffer (SRAM or SDRAM). - Programmable refresh rates. - 16 gray scale values. This new driver is designed to usage with devicetree only. The driver have been tested with custom board equipped Cirrus Logic EP7312. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-22Linux 3.16-rc2Linus Torvalds1-1/+1
2014-06-22Merge branch 'i2c/for-next' of ↵Linus Torvalds6-0/+1216
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c new drivers from Wolfram Sang: "Here is a pull request from i2c hoping for the "new driver" rule. Originally, I wanted to send this request during the merge window, but code checkers with very recent additions complained, so a few fixups were needed. So, some more time went by and I merged rc1 to get a stable base" So the "new driver" rule is really about drivers that people absolutely need for the kernel to work on new hardware, which is not so much the case for i2c. So I considered not pulling this, but eventually relented. Just for FYI: the whole (and only) point of "new drivers" is not that new drivers cannot regress things (they can, and they have - by triggering badly tested code on machines that never triggered that code before), but because they can bring to life machines that otherwise wouldn't be useful at all without the drivers. So the new driver rule is for essential things that actual consumers would care about, ie devices like networking or disk drivers that matter to normal people (not server people - they run old kernels anyway, so mainlining new drivers is irrelevant for them). * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: sun6-p2wi: fix call to snprintf i2c: rk3x: add NULL entry to the end of_device_id array i2c: sun6i-p2wi: use proper return value in probe i2c: sunxi: add P2WI (Push/Pull 2 Wire Interface) controller support i2c: sunxi: add P2WI DT bindings documentation i2c: rk3x: add driver for Rockchip RK3xxx SoC I2C adapter
2014-06-22Merge tag 'locks-v3.16-2' of git://git.samba.org/jlayton/linuxLinus Torvalds2-1/+7
Pull file locking fixes from Jeff Layton: "File locking related bugfixes Nothing too earth-shattering here. A fix for a potential regression due to a patch in pile #1, and the addition of a memory barrier to prevent a race condition between break_deleg and generic_add_lease" * tag 'locks-v3.16-2' of git://git.samba.org/jlayton/linux: locks: set fl_owner for leases back to current->files locks: add missing memory barrier in break_deleg
2014-06-22Merge branch 'rc-fixes' of ↵Linus Torvalds4-11/+12
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild fixes from Michal Marek: "There are three fixes for regressions caused by the relative paths series: deb-pkg, tar-pkg and *docs did not work with O=. Plus, there is a fix for the linux-headers deb package and a fixed typo. These are not regression fixes but are safe enough" * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: fix a typo in a kbuild document builddeb: fix missing headers in linux-headers package Documentation: Fix DocBook build with relative $(srctree) kbuild: Fix tar-pkg with relative $(objtree) deb-pkg: Fix for relative paths
2014-06-22Merge branch 'for-linus' of ↵Linus Torvalds11-172/+359
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "This fixes some lockups in btrfs reported with rc1. It probably has some performance impact because it is backing off our spinning locks more often and switching to a blocking lock. I'll be able to nail that down next week, but for now I want to get the lockups taken care of. Otherwise some more stack reduction and assorted fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix wrong error handle when the device is missing or is not writeable Btrfs: fix deadlock when mounting a degraded fs Btrfs: use bio_endio_nodec instead of open code Btrfs: fix NULL pointer crash when running balance and scrub concurrently btrfs: Skip scrubbing removed chunks to avoid -ENOENT. Btrfs: fix broken free space cache after the system crashed Btrfs: make free space cache write out functions more readable Btrfs: remove unused wait queue in struct extent_buffer Btrfs: fix deadlocks with trylock on tree nodes
2014-06-22Merge branch 'for-3.16' of git://linux-nfs.org/~bfields/linuxLinus Torvalds2-0/+79
Pull nfsd bugfixes from Bruce Fields: "Fixes for a new regression from the xdr encoding rewrite, and a delegation problem we've had for a while (made somewhat more annoying by the vfs delegation support added in 3.13)" * 'for-3.16' of git://linux-nfs.org/~bfields/linux: NFSD: fix bug for readdir of pseudofs NFSD: Don't hand out delegations for 30 seconds after recalling them.
2014-06-21Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds41-126/+1249
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "This is larger than usual: the main reason are the ARM symbol lookup speedups that came in late and were hard to resist. There's also a kprobes fix and various tooling fixes, plus the minimal re-enablement of the mmap2 support interface" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) x86/kprobes: Fix build errors and blacklist context_track_user perf tests: Add test for closing dso objects on EMFILE error perf tests: Add test for caching dso file descriptors perf tests: Allow reuse of test_file function perf tests: Spawn child for each test perf tools: Add dso__data_* interface descriptons perf tools: Allow to close dso fd in case of open failure perf tools: Add file size check and factor dso__data_read_offset perf tools: Cache dso data file descriptor perf tools: Add global count of opened dso objects perf tools: Add global list of opened dso objects perf tools: Add data_fd into dso object perf tools: Separate dso data related variables perf tools: Cache register accesses for unwind processing perf record: Fix to honor user freq/interval properly perf timechart: Reflow documentation perf probe: Improve error messages in --line option perf probe: Improve an error message of perf probe --vars mode perf probe: Show error code and description in verbose mode perf probe: Improve error message for unknown member of data structure ...
2014-06-21Merge branch 'locking-urgent-for-linus.patch' of ↵Linus Torvalds3-35/+218
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull rtmutex fixes from Thomas Gleixner: "Another three patches to make the rtmutex code more robust. That's the last urgent fallout from the big futex/rtmutex investigation" * 'locking-urgent-for-linus.patch' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rtmutex: Plug slow unlock race rtmutex: Detect changes in the pi lock chain rtmutex: Handle deadlock detection smarter
2014-06-21Merge branch 'for-linus' of ↵Linus Torvalds26-456/+505
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 patches from Martin Schwidefsky: "A couple of bug fixes, a debug change for qdio, an update for the default config, and one small extension. The watchdog module based on diagnose 0x288 is converted to the watchdog API and it now works under LPAR as well" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/ccwgroup: use ccwgroup_ungroup wrapper s390/ccwgroup: fix an uninitialized return code s390/ccwgroup: obtain extra reference for asynchronous processing qdio: Keep device-specific dbf entries s390/compat: correct ucontext layout for high gprs s390/cio: set device name as early as possible s390: update default configuration s390: avoid format strings leaking into names s390/airq: silence lockdep warning s390/watchdog: add support for LPAR operation (diag288) s390/watchdog: use watchdog API s390/sclp_vt220: Enable ASCII console per default s390/qdio: replace shift loop by ilog2 s390/cio: silence lockdep warning s390/uaccess: always load the kernel ASCE after task switch s390/ap_bus: Make modules parameters visible in sysfs
2014-06-21Merge tag 'for-linus' of git://github.com/gxt/linuxLinus Torvalds16-102/+88
Pull UniCore32 bug fixes from Guan Xuetao: "This includes bugfixes to make unicore32 successfully build under defconfig, and some changes for allmodconfig (though not finished)" * tag 'for-linus' of git://github.com/gxt/linux: unicore32: Remove ARCH_HAS_CPUFREQ config option UniCore32: Change git tree location information in MAINTAINERS arch: unicore32: ksyms: export '__cpuc_coherent_kern_range' to avoid compiling failure arch: unicore32: ksyms: export 'pm_power_off' to avoid compiling failure. arch: unicore32: ksyms: export additional find_first_*() to avoid compiling failure arch:unicore32:mm: add devmem_is_allowed() to support STRICT_DEVMEM unicore32: include: asm: add missing ')' for PAGE_* macros in pgtable.h arch/unicore32/kernel/setup.c: add generic 'screen_info' to avoid compiling failure drivers: scsi: mvsas: fix compiling issue by adding 'MVS_' for "enum pci_interrupt_cause" arch: unicore32: kernel: ksyms: remove 'bswapsi2' and 'muldi3' to avoid compiling failure arch/unicore32/kernel/ksyms.c: remove 2 export symbols to avoid compiling failure drivers/rtc/rtc-puv3.c: remove "&dev->" for typo issue MIME-Version: 1.0 drivers/rtc/rtc-puv3.c: use dev_dbg() instead of dev_debug() for typo issue arch/unicore32/include/asm/io.h: add readl_relaxed() generic definition arch/unicore32/include/asm/ptrace.h: add generic definition for profile_pc() arch/unicore32/mm/alignment.c: include "asm/pgtable.h" to avoid compiling error arch/unicore32/kernel/clock.c: add readl() and writel() for 'PM_' macros arch/unicore32/kernel/module.c: use __vmalloc_node_range() instead of __vmalloc_area() arch/unicore32/kernel/ksyms.c: remove several undefined exported symbols
2014-06-21Merge tag 'char-misc-3.16-rc2' of ↵Linus Torvalds4-3/+12
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver fixes from Greg KH: "Here are 3 patches, one a revert of the UIO patch you objected to in 3.16-rc1 and that no one wanted to defend, a w1 driver bugfix, and a MAINTAINERS update for the vmware balloon driver. All of these, except for the MAINTAINERS update which just got added, have been in linux-next just fine" * tag 'char-misc-3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: MAINTAINERS: add entry for VMware Balloon driver w1: mxc_w1: Fix incorrect "presence" status Revert "uio: fix vma io range check in mmap"
2014-06-21Merge tag 'staging-3.16-rc2' of ↵Linus Torvalds14-34/+49
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are a few fixes for staging and iio drivers that resolve issues reported in 3.16-rc1. All have been in linux-next just fine" * tag 'staging-3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: imx-drm: parallel-display: Fix DPMS default state. staging: android: timed_output: fix use after free of dev staging: comedi: addi_apci_1564: add addi_watchdog dependency staging: rtl8723au: Reference correct firmwarefiles with MODULE_FIRMWARE() staging: rtl8723au: Request correct firmware file for A-cut parts iio: adc: checking for NULL instead of IS_ERR() in probe iio: adc: at91: signedness bug in at91_adc_get_trigger_value_by_name() iio: mxs-lradc: fix divider iio: Fix endianness issue in ak8975_read_axis() staging/iio: IIO_SIMPLE_DUMMY_BUFFER neds IIO_BUFFER twl4030-madc: Request processed values in twl4030_get_madc_conversion staging: iio: tsl2x7x_core: fix proximity treshold iio: Fix two mpl3115 issues in measurement conversion iio: hid-sensors: Get feature report from sensor hub after changing power state
2014-06-21Merge tag 'tty-3.16-rc2' of ↵Linus Torvalds38-44/+60
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial bugfixes from Greg KH: "Here are some tty / serial driver bugfixes for 3.16-rc2 that resolve some reported issues. The samsung driver build error itself has been reported by a bunch of people, sorry about that one. The others are all tiny and everyone seems to like them in linux-next so far" * tag 'tty-3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty/serial: fix 8250 early console option passing to regular console tty: Correct INPCK handling serial: Fix IGNBRK handling serial: samsung: Fix build error
2014-06-21Merge tag 'usb-3.16-rc2' of ↵Linus Torvalds6-42/+119
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some USB fixes for 3.16-rc2 that resolve some reported issues. All of these have been in linux-next for a while with no problems" * tag 'usb-3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: usbtest: add a timeout for scatter-gather tests USB: EHCI: avoid BIOS handover on the HASEE E200 usb: fix hub-port pm_runtime_enable() vs runtime pm transitions usb: quiet peer failure warning, disable poweroff usb: improve "not suspended yet" message in hub_suspend() xhci: Fix sleeping with IRQs disabled in xhci_stop_device() usb: fix ->update_hub_device() vs hdev->maxchild
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 02:21:03 +0300