summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-09-23KVM: x86: selftests: test simultaneous uses of V_IRQ from L1 and L0Maxim Levitsky3-0/+130
Test that if: * L1 disables virtual interrupt masking, and INTR intercept. * L1 setups a virtual interrupt to be injected to L2 and enters L2 with interrupts disabled, thus the virtual interrupt is pending. * Now an external interrupt arrives in L1 and since L1 doesn't intercept it, it should be delivered to L2 when it enables interrupts. to do this L0 (abuses) V_IRQ to setup an interrupt window, and returns to L2. * L2 enables interrupts. This should trigger the interrupt window, injection of the external interrupt and delivery of the virtual interrupt that can now be done. * Test that now L2 gets those interrupts. This is the test that demonstrates the issue that was fixed in the previous patch. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210914154825.104886-3-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-23KVM: x86: nSVM: restore int_vector in svm_clear_vintrMaxim Levitsky1-0/+2
In svm_clear_vintr we try to restore the virtual interrupt injection that might be pending, but we fail to restore the interrupt vector. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210914154825.104886-2-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-23atlantic: Fix issue in the pm resume flow.Sudarsana Reddy Kalluru1-2/+2
After fixing hibernation resume flow, another usecase was found which should be explicitly handled - resume when device is in "down" state. Invoke aq_nic_init jointly with aq_nic_start only if ndev was already up during suspend/hibernate. We still need to perform nic_deinit() if caller requests for it, to handle the freeze/resume scenarios. Fixes: 57f780f1c433 ("atlantic: Fix driver resume flow.") Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23net/mlx4_en: Don't allow aRFS for encapsulated packetsAya Levin1-0/+3
Driver doesn't support aRFS for encapsulated packets, return early error in such a case. Fixes: 1eb8c695bda9 ("net/mlx4_en: Add accelerated RFS support") Signed-off-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabledVladimir Oltean1-3/+8
The blamed commit made the fatally incorrect assumption that ports which aren't in the FORWARDING STP state should not have packets forwarded towards them, and that is all that needs to be done. However, that logic alone permits BLOCKING ports to forward to FORWARDING ports, which of course allows packet storms to occur when there is an L2 loop. The ocelot_get_bridge_fwd_mask should not only ask "what can the bridge do for you", but "what can you do for the bridge". This way, only FORWARDING ports forward to the other FORWARDING ports from the same bridging domain, and we are still compatible with the idea of multiple bridges. Fixes: df291e54ccca ("net: ocelot: support multiple bridges") Suggested-by: Colin Foster <colin.foster@in-advantage.com> Reported-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23net: ethernet: mtk_eth_soc: avoid creating duplicate offload entriesFelix Fietkau1-0/+3
Sometimes multiple CLS_REPLACE calls are issued for the same connection. rhashtable_insert_fast does not check for these duplicates, so multiple hardware flow entries can be created. Fix this by checking for an existing entry early Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23net: dsa: sja1105: stop using priv->vlan_awareVladimir Oltean3-12/+11
Now that the sja1105 driver is finally sane enough again to stop having a ternary VLAN awareness state, we can remove priv->vlan_aware and query DSA for the ds->vlan_filtering value (for SJA1105, VLAN filtering is a global property). Also drop the paranoid checking that DSA calls ->port_vlan_filtering multiple times without the VLAN awareness state changing. It doesn't, the same check is present inside dsa_port_vlan_filtering too. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23nfc: st-nci: Add SPI ID matching DT compatibleMark Brown1-0/+1
Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding the part name used in the compatible to the list of SPI IDs. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23MAINTAINERS: remove Guvenc Gulce as net/smc maintainerGuvenc Gulce1-1/+0
Remove myself as net/smc maintainer, as I am leaving IBM soon and can not maintain net/smc anymore. Cc: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23Merge branch 'remove-sk-skb-caches'David S. Miller9-149/+85
Paolo Abeni says: ==================== net: remove sk skb caches Eric noted we would be better off reverting the sk skb caches. MPTCP relies on such a feature, so we need a little refactor of the MPTCP tx path before the mentioned revert. The first patch exposes additional TCP helpers. The 2nd patch changes the MPTCP code to do locally the whole skb allocation and updating, so it does not rely anymore on core TCP helpers for that nor the sk skb cache. As a side effect, we can make the tcp_build_frag helper static. Finally, we can pull Eric's revert. RFC -> v1: - drop driver specific patch - no more needed after helper rename - rename skb_entail -> tcp_skb_entail (Eric) - preserve the tcp_build_frag helpwe, just make it static (Eric) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23tcp: remove sk_{tr}x_skb_cacheEric Dumazet7-81/+0
This reverts the following patches : - commit 2e05fcae83c4 ("tcp: fix compile error if !CONFIG_SYSCTL") - commit 4f661542a402 ("tcp: fix zerocopy and notsent_lowat issues") - commit 472c2e07eef0 ("tcp: add one skb cache for tx") - commit 8b27dae5a2e8 ("tcp: add one skb cache for rx") Having a cache of one skb (in each direction) per TCP socket is fragile, since it can cause a significant increase of memory needs, and not good enough for high speed flows anyway where more than one skb is needed. We want instead to add a generic infrastructure, with more flexible per-cpu caches, for alien NUMA nodes. Acked-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23tcp: make tcp_build_frag() staticPaolo Abeni2-4/+2
After the previous patch the mentioned helper is used only inside its compilation unit: let's make it static. RFC -> v1: - preserve the tcp_build_frag() helper (Eric) Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23mptcp: stop relying on tcp_tx_skb_cachePaolo Abeni1-60/+77
We want to revert the skb TX cache, but MPTCP is currently using it unconditionally. Rework the MPTCP tx code, so that tcp_tx_skb_cache is not needed anymore: do the whole coalescing check, skb allocation skb initialization/update inside mptcp_sendmsg_frag(), quite alike the current TCP code. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23tcp: expose the tcp_mark_push() and tcp_skb_entail() helpersPaolo Abeni2-4/+6
the tcp_skb_entail() helper is actually skb_entail(), renamed to provide proper scope. The two helper will be used by the next patch. RFC -> v1: - rename skb_entail to tcp_skb_entail (Eric) Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23mptcp: ensure tx skbs always have the MPTCP extPaolo Abeni1-2/+2
Due to signed/unsigned comparison, the expression: info->size_goal - skb->len > 0 evaluates to true when the size goal is smaller than the skb size. That results in lack of tx cache refill, so that the skb allocated by the core TCP code lacks the required MPTCP skb extensions. Due to the above, syzbot is able to trigger the following WARN_ON(): WARNING: CPU: 1 PID: 810 at net/mptcp/protocol.c:1366 mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Modules linked in: CPU: 1 PID: 810 Comm: syz-executor.4 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Code: ff 4c 8b 74 24 50 48 8b 5c 24 58 e9 0f fb ff ff e8 13 44 8b f8 4c 89 e7 45 31 ed e8 98 57 2e fe e9 81 f4 ff ff e8 fe 43 8b f8 <0f> 0b 41 bd ea ff ff ff e9 6f f4 ff ff 4c 89 e7 e8 b9 8e d2 f8 e9 RSP: 0018:ffffc9000531f6a0 EFLAGS: 00010216 RAX: 000000000000697f RBX: 0000000000000000 RCX: ffffc90012107000 RDX: 0000000000040000 RSI: ffffffff88eac9e2 RDI: 0000000000000003 RBP: ffff888078b15780 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff88eac017 R11: 0000000000000000 R12: ffff88801de0a280 R13: 0000000000006b58 R14: ffff888066278280 R15: ffff88803c2fe9c0 FS: 00007fd9f866e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007faebcb2f718 CR3: 00000000267cb000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __mptcp_push_pending+0x1fb/0x6b0 net/mptcp/protocol.c:1547 mptcp_release_cb+0xfe/0x210 net/mptcp/protocol.c:3003 release_sock+0xb4/0x1b0 net/core/sock.c:3206 sk_stream_wait_memory+0x604/0xed0 net/core/stream.c:145 mptcp_sendmsg+0xc39/0x1bc0 net/mptcp/protocol.c:1749 inet6_sendmsg+0x99/0xe0 net/ipv6/af_inet6.c:643 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_write_iter+0x2a0/0x3e0 net/socket.c:1057 call_write_iter include/linux/fs.h:2163 [inline] new_sync_write+0x40b/0x640 fs/read_write.c:507 vfs_write+0x7cf/0xae0 fs/read_write.c:594 ksys_write+0x1ee/0x250 fs/read_write.c:647 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fd9f866e188 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000056c038 RCX: 00000000004665f9 RDX: 00000000000e7b78 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000004bfcc4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056c038 R13: 0000000000a9fb1f R14: 00007fd9f866e300 R15: 0000000000022000 Fix the issue rewriting the relevant expression to avoid sign-related problems - note: size_goal is always >= 0. Additionally, ensure that the skb in the tx cache always carries the relevant extension. Reported-and-tested-by: syzbot+263a248eec3e875baa7b@syzkaller.appspotmail.com Fixes: 1094c6fe7280 ("mptcp: fix possible divide by zero") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23net: dsa: sja1105: don't keep a persistent reference to the reset GPIOVladimir Oltean2-10/+20
The driver only needs the reset GPIO for a very brief period, so instead of using devres and keeping the descriptor pointer inside priv, just use that descriptor inside the sja1105_hw_reset function and then let go of it. Also use gpiod_get_optional while at it, and error out on real errors (bad flags etc). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23Merge branch 'ja1105-deps'David S. Miller6-88/+63
Vladimir Oltean says: ==================== Fix circular dependency between sja1105 and tag_sja1105 As discussed here: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ DSA tagging protocols cannot use symbols exported by switch drivers. Eliminate the two instances of that from tag_sja1105, and that allows us to have a working setup with modules again. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23net: dsa: sja1105: break dependency between dsa_port_is_sja1105 and switch ↵Vladimir Oltean3-17/+2
driver It's nice to be able to test a tagging protocol with dsa_loop, but not at the cost of losing the ability of building the tagging protocol and switch driver as modules, because as things stand, there is a circular dependency between the two. Tagging protocol drivers cannot depend on switch drivers, that is a hard fact. The reasoning behind the blamed patch was that accessing dp->priv should first make sure that the structure behind that pointer is what we really think it is. Currently the "sja1105" and "sja1110" tagging protocols only operate with the sja1105 switch driver, just like any other tagging protocol and switch combination. The only way to mix and match them is by modifying the code, and this applies to dsa_loop as well (by default that uses DSA_TAG_PROTO_NONE). So while in principle there is an issue, in practice there isn't one. Until we extend dsa_loop to allow user space configuration, treat the problem as a non-issue and just say that DSA ports found by tag_sja1105 are always sja1105 ports, which is in fact true. But keep the dsa_port_is_sja1105 function so that it's easy to patch it during testing, and rely on dead code elimination. Fixes: 994d2cbb08ca ("net: dsa: tag_sja1105: be dsa_loop-safe") Link: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23net: dsa: move sja1110_process_meta_tstamp inside the tagging protocol driverVladimir Oltean4-73/+63
The problem is that DSA tagging protocols really must not depend on the switch driver, because this creates a circular dependency at insmod time, and the switch driver will effectively not load when the tagging protocol driver is missing. The code was structured in the way it was for a reason, though. The DSA driver-facing API for PTP timestamping relies on the assumption that two-step TX timestamps are provided by the hardware in an out-of-band manner, typically by raising an interrupt and making that timestamp available inside some sort of FIFO which is to be accessed over SPI/MDIO/etc. So the API puts .port_txtstamp into dsa_switch_ops, because it is expected that the switch driver needs to save some state (like put the skb into a queue until its TX timestamp arrives). On SJA1110, TX timestamps are provided by the switch as Ethernet packets, so this makes them be received and processed by the tagging protocol driver. This in itself is great, because the timestamps are full 64-bit and do not require reconstruction, and since Ethernet is the fastest I/O method available to/from the switch, PTP timestamps arrive very quickly, no matter how bottlenecked the SPI connection is, because SPI interaction is not needed at all. DSA's code structure and strict isolation between the tagging protocol driver and the switch driver break the natural code organization. When the tagging protocol driver receives a packet which is classified as a metadata packet containing timestamps, it passes those timestamps one by one to the switch driver, which then proceeds to compare them based on the recorded timestamp ID that was generated in .port_txtstamp. The communication between the tagging protocol and the switch driver is done through a method exported by the switch driver, sja1110_process_meta_tstamp. To satisfy build requirements, we force a dependency to build the tagging protocol driver as a module when the switch driver is a module. However, as explained in the first paragraph, that causes the circular dependency. To solve this, move the skb queue from struct sja1105_private :: struct sja1105_ptp_data to struct sja1105_private :: struct sja1105_tagger_data. The latter is a data structure for which hacks have already been put into place to be able to create persistent storage per switch that is accessible from the tagging protocol driver (see sja1105_setup_ports). With the skb queue directly accessible from the tagging protocol driver, we can now move sja1110_process_meta_tstamp into the tagging driver itself, and avoid exporting a symbol. Fixes: 566b18c8b752 ("net: dsa: sja1105: implement TX timestamping for SJA1110") Link: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/ Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23net: dsa: sja1105: remove sp->dpVladimir Oltean2-2/+0
It looks like this field was never used since its introduction in commit 227d07a07ef1 ("net: dsa: sja1105: Add support for traffic through standalone ports") remove it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23nexthop: Fix memory leaks in nexthop notification chain listenersIdo Schimmel2-6/+15
syzkaller discovered memory leaks [1] that can be reduced to the following commands: # ip nexthop add id 1 blackhole # devlink dev reload pci/0000:06:00.0 As part of the reload flow, mlxsw will unregister its netdevs and then unregister from the nexthop notification chain. Before unregistering from the notification chain, mlxsw will receive delete notifications for nexthop objects using netdevs registered by mlxsw or their uppers. mlxsw will not receive notifications for nexthops using netdevs that are not dismantled as part of the reload flow. For example, the blackhole nexthop above that internally uses the loopback netdev as its nexthop device. One way to fix this problem is to have listeners flush their nexthop tables after unregistering from the notification chain. This is error-prone as evident by this patch and also not symmetric with the registration path where a listener receives a dump of all the existing nexthops. Therefore, fix this problem by replaying delete notifications for the listener being unregistered. This is symmetric to the registration path and also consistent with the netdev notification chain. The above means that unregister_nexthop_notifier(), like register_nexthop_notifier(), will have to take RTNL in order to iterate over the existing nexthops and that any callers of the function cannot hold RTNL. This is true for mlxsw and netdevsim, but not for the VXLAN driver. To avoid a deadlock, change the latter to unregister its nexthop listener without holding RTNL, making it symmetric to the registration path. [1] unreferenced object 0xffff88806173d600 (size 512): comm "syz-executor.0", pid 1290, jiffies 4295583142 (age 143.507s) hex dump (first 32 bytes): 41 9d 1e 60 80 88 ff ff 08 d6 73 61 80 88 ff ff A..`......sa.... 08 d6 73 61 80 88 ff ff 01 00 00 00 00 00 00 00 ..sa............ backtrace: [<ffffffff81a6b576>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<ffffffff81a6b576>] slab_post_alloc_hook+0x96/0x490 mm/slab.h:522 [<ffffffff81a716d3>] slab_alloc_node mm/slub.c:3206 [inline] [<ffffffff81a716d3>] slab_alloc mm/slub.c:3214 [inline] [<ffffffff81a716d3>] kmem_cache_alloc_trace+0x163/0x370 mm/slub.c:3231 [<ffffffff82e8681a>] kmalloc include/linux/slab.h:591 [inline] [<ffffffff82e8681a>] kzalloc include/linux/slab.h:721 [inline] [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_group_create drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:4918 [inline] [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_new drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5054 [inline] [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_event+0x59a/0x2910 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5239 [<ffffffff813ef67d>] notifier_call_chain+0xbd/0x210 kernel/notifier.c:83 [<ffffffff813f0662>] blocking_notifier_call_chain kernel/notifier.c:318 [inline] [<ffffffff813f0662>] blocking_notifier_call_chain+0x72/0xa0 kernel/notifier.c:306 [<ffffffff8384b9c6>] call_nexthop_notifiers+0x156/0x310 net/ipv4/nexthop.c:244 [<ffffffff83852bd8>] insert_nexthop net/ipv4/nexthop.c:2336 [inline] [<ffffffff83852bd8>] nexthop_add net/ipv4/nexthop.c:2644 [inline] [<ffffffff83852bd8>] rtm_new_nexthop+0x14e8/0x4d10 net/ipv4/nexthop.c:2913 [<ffffffff833e9a78>] rtnetlink_rcv_msg+0x448/0xbf0 net/core/rtnetlink.c:5572 [<ffffffff83608703>] netlink_rcv_skb+0x173/0x480 net/netlink/af_netlink.c:2504 [<ffffffff833de032>] rtnetlink_rcv+0x22/0x30 net/core/rtnetlink.c:5590 [<ffffffff836069de>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<ffffffff836069de>] netlink_unicast+0x5ae/0x7f0 net/netlink/af_netlink.c:1340 [<ffffffff83607501>] netlink_sendmsg+0x8e1/0xe30 net/netlink/af_netlink.c:1929 [<ffffffff832fde84>] sock_sendmsg_nosec net/socket.c:704 [inline] [<ffffffff832fde84>] sock_sendmsg net/socket.c:724 [inline] [<ffffffff832fde84>] ____sys_sendmsg+0x874/0x9f0 net/socket.c:2409 [<ffffffff83304a44>] ___sys_sendmsg+0x104/0x170 net/socket.c:2463 [<ffffffff83304c01>] __sys_sendmsg+0x111/0x1f0 net/socket.c:2492 [<ffffffff83304d5d>] __do_sys_sendmsg net/socket.c:2501 [inline] [<ffffffff83304d5d>] __se_sys_sendmsg net/socket.c:2499 [inline] [<ffffffff83304d5d>] __x64_sys_sendmsg+0x7d/0xc0 net/socket.c:2499 Fixes: 2a014b200bbd ("mlxsw: spectrum_router: Add support for nexthop objects") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23mac80211-hwsim: fix late beacon hrtimer handlingJohannes Berg1-2/+2
Thomas explained in https://lore.kernel.org/r/87mtoeb4hb.ffs@tglx that our handling of the hrtimer here is wrong: If the timer fires late (e.g. due to vCPU scheduling, as reported by Dmitry/syzbot) then it tries to actually rearm the timer at the next deadline, which might be in the past already: 1 2 3 N N+1 | | | ... | | ^ intended to fire here (1) ^ next deadline here (2) ^ actually fired here The next time it fires, it's later, but will still try to schedule for the next deadline (now 3), etc. until it catches up with N, but that might take a long time, causing stalls etc. Now, all of this is simulation, so we just have to fix it, but note that the behaviour is wrong even per spec, since there's no value then in sending all those beacons unaligned - they should be aligned to the TBTT (1, 2, 3, ... in the picture), and if we're a bit (or a lot) late, then just resume at that point. Therefore, change the code to use hrtimer_forward_now() which will ensure that the next firing of the timer would be at N+1 (in the picture), i.e. the next interval point after the current time. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: syzbot+0e964fad69a9c462bc1e@syzkaller.appspotmail.com Fixes: 01e59e467ecf ("mac80211_hwsim: hrtimer beacon") Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210915112936.544f383472eb.I3f9712009027aa09244b65399bf18bf482a8c4f1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-09-23mac80211: mesh: fix potentially unaligned accessJohannes Berg1-1/+2
The pointer here points directly into the frame, so the access is potentially unaligned. Use get_unaligned_le16 to avoid that. Fixes: 3f52b7e328c5 ("mac80211: mesh power save basics") Link: https://lore.kernel.org/r/20210920154009.3110ff75be0c.Ib6a2ff9e9cc9bc6fca50fce631ec1ce725cc926b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-09-23mac80211: limit injected vht mcs/nss in ieee80211_parse_tx_radiotapLorenzo Bianconi1-0/+4
Limit max values for vht mcs and nss in ieee80211_parse_tx_radiotap routine in order to fix the following warning reported by syzbot: WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_rate_set_vht include/net/mac80211.h:989 [inline] WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244 Modules linked in: CPU: 0 PID: 10717 Comm: syz-executor.5 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:ieee80211_rate_set_vht include/net/mac80211.h:989 [inline] RIP: 0010:ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244 RSP: 0018:ffffc9000186f3e8 EFLAGS: 00010216 RAX: 0000000000000618 RBX: ffff88804ef76500 RCX: ffffc900143a5000 RDX: 0000000000040000 RSI: ffffffff888f478e RDI: 0000000000000003 RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000100 R10: ffffffff888f46f9 R11: 0000000000000000 R12: 00000000fffffff8 R13: ffff88804ef7653c R14: 0000000000000001 R15: 0000000000000004 FS: 00007fbf5718f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2de23000 CR3: 000000006a671000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Call Trace: ieee80211_monitor_select_queue+0xa6/0x250 net/mac80211/iface.c:740 netdev_core_pick_tx+0x169/0x2e0 net/core/dev.c:4089 __dev_queue_xmit+0x6f9/0x3710 net/core/dev.c:4165 __bpf_tx_skb net/core/filter.c:2114 [inline] __bpf_redirect_no_mac net/core/filter.c:2139 [inline] __bpf_redirect+0x5ba/0xd20 net/core/filter.c:2162 ____bpf_clone_redirect net/core/filter.c:2429 [inline] bpf_clone_redirect+0x2ae/0x420 net/core/filter.c:2401 bpf_prog_eeb6f53a69e5c6a2+0x59/0x234 bpf_dispatcher_nop_func include/linux/bpf.h:717 [inline] __bpf_prog_run include/linux/filter.h:624 [inline] bpf_prog_run include/linux/filter.h:631 [inline] bpf_test_run+0x381/0xa30 net/bpf/test_run.c:119 bpf_prog_test_run_skb+0xb84/0x1ee0 net/bpf/test_run.c:663 bpf_prog_test_run kernel/bpf/syscall.c:3307 [inline] __sys_bpf+0x2137/0x5df0 kernel/bpf/syscall.c:4605 __do_sys_bpf kernel/bpf/syscall.c:4691 [inline] __se_sys_bpf kernel/bpf/syscall.c:4689 [inline] __x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:4689 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Reported-by: syzbot+0196ac871673f0c20f68@syzkaller.appspotmail.com Fixes: 646e76bb5daf4 ("mac80211: parse VHT info in injected frames") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/c26c3f02dcb38ab63b2f2534cb463d95ee81bb13.1632141760.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-09-23mac80211: Drop frames from invalid MAC address in ad-hoc modeYueHaibing1-1/+2
WARNING: CPU: 1 PID: 9 at net/mac80211/sta_info.c:554 sta_info_insert_rcu+0x121/0x12a0 Modules linked in: CPU: 1 PID: 9 Comm: kworker/u8:1 Not tainted 5.14.0-rc7+ #253 Workqueue: phy3 ieee80211_iface_work RIP: 0010:sta_info_insert_rcu+0x121/0x12a0 ... Call Trace: ieee80211_ibss_finish_sta+0xbc/0x170 ieee80211_ibss_work+0x13f/0x7d0 ieee80211_iface_work+0x37a/0x500 process_one_work+0x357/0x850 worker_thread+0x41/0x4d0 If an Ad-Hoc node receives packets with invalid source MAC address, it hits a WARN_ON in sta_info_insert_check(), this can spam the log. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20210827144230.39944-1-yuehaibing@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-09-23mac80211: Fix ieee80211_amsdu_aggregate frag_tail bugChih-Kang Chang1-0/+8
In ieee80211_amsdu_aggregate() set a pointer frag_tail point to the end of skb_shinfo(head)->frag_list, and use it to bind other skb in the end of this function. But when execute ieee80211_amsdu_aggregate() ->ieee80211_amsdu_realloc_pad()->pskb_expand_head(), the address of skb_shinfo(head)->frag_list will be changed. However, the ieee80211_amsdu_aggregate() not update frag_tail after call pskb_expand_head(). That will cause the second skb can't bind to the head skb appropriately.So we update the address of frag_tail to fix it. Fixes: 6e0456b54545 ("mac80211: add A-MSDU tx support") Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://lore.kernel.org/r/20210830073240.12736-1-pkshih@realtek.com [reword comment] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-09-23Revert "mac80211: do not use low data rates for data frames with no ack flag"Felix Fietkau1-4/+0
This reverts commit d333322361e7 ("mac80211: do not use low data rates for data frames with no ack flag"). Returning false early in rate_control_send_low breaks sending broadcast packets, since rate control will not select a rate for it. Before re-introducing a fixed version of this patch, we should probably also make some changes to rate control to be more conservative in selecting rates for no-ack packets and also prevent using probing rates on them, since we won't get any feedback. Fixes: d333322361e7 ("mac80211: do not use low data rates for data frames with no ack flag") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210906083559.9109-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-09-23posix-cpu-timers: Prevent spuriously armed 0-value itimerFrederic Weisbecker1-1/+2
Resetting/stopping an itimer eventually leads to it being reprogrammed with an actual "0" value. As a result the itimer expires on the next tick, triggering an unexpected signal. To fix this, make sure that struct signal_struct::it[CPUCLOCK_PROF/VIRT]::expires is set to 0 when setitimer() passes a 0 it_value, indicating that the timer must stop. Fixes: 406dd42bd1ba ("posix-cpu-timers: Force next expiration recalc after itimer reset") Reported-by: Victor Stinner <vstinner@redhat.com> Reported-by: Chris Hixon <linux-kernel-bugs@hixontech.com> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210913145332.232023-1-frederic@kernel.org
2021-09-23USB: serial: cp210x: add part-number debug printkJohan Hovold1-0/+2
Add a part-number debug printk to facilitate debugging. Signed-off-by: Johan Hovold <johan@kernel.org>
2021-09-23USB: serial: cp210x: fix dropped characters with CP2102Johan Hovold1-0/+35
Some CP2102 do not support event-insertion mode but return no error when attempting to enable it. This means that any event escape characters in the input stream will not be escaped by the device and consequently regular data may be interpreted as escape sequences and be removed from the stream by the driver. The reporter's device has batch number DCL00X etched into it and as discovered by the SHA2017 Badge team, counterfeit devices with that marking can be detected by sending malformed vendor requests. [1][2] Tests confirm that the possibly counterfeit CP2102 returns a single byte in response to a malformed two-byte part-number request, while an original CP2102 returns two bytes. Assume that every CP2102 that behaves this way also does not support event-insertion mode (e.g. cannot report parity errors). [1] https://mobile.twitter.com/sha2017badge/status/1167902087289532418 [2] https://hackaday.com/2017/08/14/hands-on-with-the-shacamp-2017-badge/#comment-3903376 Reported-by: Malte Di Donato <malte@neo-soft.org> Tested-by: Malte Di Donato <malte@neo-soft.org> Fixes: a7207e9835a4 ("USB: serial: cp210x: add support for line-status events") Cc: stable@vger.kernel.org # 5.9 Link: https://lore.kernel.org/r/20210922113100.20888-1-johan@kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2021-09-23ALSA: rawmidi: introduce SNDRV_RAWMIDI_IOCTL_USER_PVERSIONJaroslav Kysela3-0/+11
The new framing mode causes the user space regression, because the alsa-lib code does not initialize the reserved space in the params structure when the device is opened. This change adds SNDRV_RAWMIDI_IOCTL_USER_PVERSION like we do for the PCM interface for the protocol acknowledgment. Cc: David Henningsson <coding@diwic.se> Cc: <stable@vger.kernel.org> Fixes: 08fdced60ca0 ("ALSA: rawmidi: Add framing mode") BugLink: https://github.com/alsa-project/alsa-lib/issues/178 Signed-off-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20210920171850.154186-1-perex@perex.cz Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-09-23ksmbd: remove follow symlinks supportNamjae Jeon2-56/+19
Use LOOKUP_NO_SYMLINKS flags for default lookup to prohibit the middle of symlink component lookup and remove follow symlinks parameter support. We re-implement it as reparse point later. Test result: smbclient -Ulinkinjeon%1234 //172.30.1.42/share -c "get hacked/passwd passwd" NT_STATUS_OBJECT_NAME_NOT_FOUND opening remote file \hacked\passwd Cc: Ralph Böhme <slow@samba.org> Cc: Steve French <smfrench@gmail.com> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-09-23ksmbd: check protocol id in ksmbd_verify_smb_message()Namjae Jeon3-5/+11
When second smb2 pdu has invalid protocol id, ksmbd doesn't detect it and allow to process smb2 request. This patch add the check it in ksmbd_verify_smb_message() and don't use protocol id of smb2 request as protocol id of response. Reviewed-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Ralph Böhme <slow@samba.org> Reported-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-09-23bpf: Document BPF licensing.Alexei Starovoitov2-0/+101
Document and clarify BPF licensing. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Joe Stringer <joe@cilium.io> Acked-by: Lorenz Bauer <lmb@cloudflare.com> Acked-by: Dave Thaler <dthaler@microsoft.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: KP Singh <kpsingh@kernel.org> Link: https://lore.kernel.org/bpf/20210917230034.51080-1-alexei.starovoitov@gmail.com
2021-09-22init: Revert accidental changes to print irqs_disabled()Geert Uytterhoeven1-3/+3
Commit f8ade8dddb16 ("xsurf100: drop include of lib8390.c") accidentally changed init/main.c. Revert that part. Fixes: f8ade8dddb16 ("xsurf100: drop include of lib8390.c") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-22MAINTAINERS: Update Xen-[PCI,SWIOTLB,Block] maintainershipKonrad Rzeszutek Wilk1-3/+3
Konrad's new job role is putting a serious cramp on him being a responsive maintainer and as such he is handing off the reins to Juergen, Roger, and Stefano. Thank you! Acked-by: Juergen Gross <jgross@suse.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-22MAINTAINERS: Update SWIOTLB maintainershipKonrad Rzeszutek Wilk1-2/+3
Konrad's new job role is putting a serious cramp on him being a responsive maintainer and as such he is handing off the reins to Christoph Hellwig. Thank you! Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-22MAINTAINERS: update entry for NIOS2Dinh Nguyen1-2/+2
Ley Foon has left Intel and will no longer be able to maintain NIOS2. Update the MAINTAINER's entry to Dinh Nguyen. Acked-by: Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-22Merge tag 'spi-fix-v5.15-rc1' of ↵Linus Torvalds1-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi modalias fix from Mark Brown: "Fix modalias issues As reported by Russell King the change to use OF style modaliases for DT enumerated broke at least the spi-nor driver, the patch here reverts that change to fix the regression. Sadly this will mean that anything that started loading since the change to OF modaliases will run into issues, there doesn't seem to be any approach which doesn't cause some problems and thi seems like the least bad approach - gory details are in the commit log for the change. I'm currently working through the SPI drivers to add ID tables and missing IDs to tables which should address things from the other end, this seems more straightforward and robust than any other options" * tag 'spi-fix-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: Revert modalias changes
2021-09-22Merge branch 'md-fixes' of ↵Jens Axboe1-5/+0
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-5.15 Pull MD fix from Song. * 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md: fix a lock order reversal in md_alloc
2021-09-22fs-verity: fix signed integer overflow with i_size near S64_MAXEric Biggers2-2/+2
If the file size is almost S64_MAX, the calculated number of Merkle tree levels exceeds FS_VERITY_MAX_LEVELS, causing FS_IOC_ENABLE_VERITY to fail. This is unintentional, since as the comment above the definition of FS_VERITY_MAX_LEVELS states, it is enough for over U64_MAX bytes of data using SHA-256 and 4K blocks. (Specifically, 4096*128**8 >= 2**64.) The bug is actually that when the number of blocks in the first level is calculated from i_size, there is a signed integer overflow due to i_size being signed. Fix this by treating i_size as unsigned. This was found by the new test "generic: test fs-verity EFBIG scenarios" (https://lkml.kernel.org/r/b1d116cd4d0ea74b9cd86f349c672021e005a75c.1631558495.git.boris@bur.io). This didn't affect ext4 or f2fs since those have a smaller maximum file size, but it did affect btrfs which allows files up to S64_MAX bytes. Reported-by: Boris Burkov <boris@bur.io> Fixes: 3fda4c617e84 ("fs-verity: implement FS_IOC_ENABLE_VERITY ioctl") Fixes: fd2d1acfcadf ("fs-verity: add the hook for file ->open()") Cc: <stable@vger.kernel.org> # v5.4+ Reviewed-by: Boris Burkov <boris@bur.io> Link: https://lore.kernel.org/r/20210916203424.113376-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2021-09-22x86/asm: Fix SETZ size enqcmds() build failureKees Cook1-1/+1
When building under GCC 4.9 and 5.5: arch/x86/include/asm/special_insns.h: Assembler messages: arch/x86/include/asm/special_insns.h:286: Error: operand size mismatch for `setz' Change the type to "bool" for condition code arguments, as documented. Fixes: 7f5933f81bd8 ("x86/asm: Add an enqcmds() wrapper for the ENQCMDS instruction") Co-developed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20210910223332.3224851-1-keescook@chromium.org
2021-09-22RDMA/cma: Do not change route.addr.src_addr.ss_familyJason Gunthorpe1-2/+6
If the state is not idle then rdma_bind_addr() will immediately fail and no change to global state should happen. For instance if the state is already RDMA_CM_LISTEN then this will corrupt the src_addr and would cause the test in cma_cancel_operation(): if (cma_any_addr(cma_src_addr(id_priv)) && !id_priv->cma_dev) To view a mangled src_addr, eg with a IPv6 loopback address but an IPv4 family, failing the test. This would manifest as this trace from syzkaller: BUG: KASAN: use-after-free in __list_add_valid+0x93/0xa0 lib/list_debug.c:26 Read of size 8 at addr ffff8881546491e0 by task syz-executor.1/32204 CPU: 1 PID: 32204 Comm: syz-executor.1 Not tainted 5.12.0-rc8-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x141/0x1d7 lib/dump_stack.c:120 print_address_description.constprop.0.cold+0x5b/0x2f8 mm/kasan/report.c:232 __kasan_report mm/kasan/report.c:399 [inline] kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:416 __list_add_valid+0x93/0xa0 lib/list_debug.c:26 __list_add include/linux/list.h:67 [inline] list_add_tail include/linux/list.h:100 [inline] cma_listen_on_all drivers/infiniband/core/cma.c:2557 [inline] rdma_listen+0x787/0xe00 drivers/infiniband/core/cma.c:3751 ucma_listen+0x16a/0x210 drivers/infiniband/core/ucma.c:1102 ucma_write+0x259/0x350 drivers/infiniband/core/ucma.c:1732 vfs_write+0x28e/0xa30 fs/read_write.c:603 ksys_write+0x1ee/0x250 fs/read_write.c:658 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae Which is indicating that an rdma_id_private was destroyed without doing cma_cancel_listens(). Instead of trying to re-use the src_addr memory to indirectly create an any address build one explicitly on the stack and bind to that as any other normal flow would do. Link: https://lore.kernel.org/r/0-v1-9fbb33f5e201+2a-cma_listen_jgg@nvidia.com Cc: stable@vger.kernel.org Fixes: 732d41c545bb ("RDMA/cma: Make the locking for automatic state transition more clear") Reported-by: syzbot+6bb0528b13611047209c@syzkaller.appspotmail.com Tested-by: Hao Sun <sunhao.th@gmail.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-09-22Merge tag 'nfsd-5.15-2' of ↵Linus Torvalds2-14/+15
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: "Critical bug fixes: - Fix crash in NLM TEST procedure - NFSv4.1+ backchannel not restored after PATH_DOWN" * tag 'nfsd-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: back channel stuck in SEQ4_STATUS_CB_PATH_DOWN NLM: Fix svcxdr_encode_owner()
2021-09-22Merge tag 'platform-drivers-x86-v5.15-2' of ↵Linus Torvalds7-15/+77
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "The first round of bug-fixes for platform-drivers-x86 for 5.15, highlights: - amd-pmc fix for some suspend/resume issues - intel-hid fix to avoid false-positive SW_TABLET_MODE=1 reporting - some build error/warning fixes - various DMI quirk additions" * tag 'platform-drivers-x86-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: gigabyte-wmi: add support for B550I Aorus Pro AX platform/x86/intel: hid: Add DMI switches allow list platform/x86: dell: fix DELL_WMI_PRIVACY dependencies & build error platform/x86: amd-pmc: Increase the response register timeout platform/x86: touchscreen_dmi: Update info for the Chuwi Hi10 Plus (CWI527) tablet platform/x86: touchscreen_dmi: Add info for the Chuwi HiBook (CWI514) tablet lg-laptop: Correctly handle dmi_get_system_info() returning NULL platform/x86/intel: punit_ipc: Drop wrong use of ACPI_PTR()
2021-09-22MAINTAINERS: ARM/VT8500, remove defunct e-mailJiri Slaby1-2/+1
linux@prisktech.co.nz is defunct: 4.1.2 <linux@prisktech.co.nz>: Recipient address rejected: Domain not found Remove it from MAINTAINERS and mark the ARM/VT8500 entry orphan. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-22md: fix a lock order reversal in md_allocChristoph Hellwig1-5/+0
Commit b0140891a8cea3 ("md: Fix race when creating a new md device.") not only moved assigning mddev->gendisk before calling add_disk, which fixes the races described in the commit log, but also added a mddev->open_mutex critical section over add_disk and creation of the md kobj. Adding a kobject after add_disk is racy vs deleting the gendisk right after adding it, but md already prevents against that by holding a mddev->active reference. On the other hand taking this lock added a lock order reversal with what is not disk->open_mutex (used to be bdev->bd_mutex when the commit was added) for partition devices, which need that lock for the internal open for the partition scan, and a recent commit also takes it for non-partitioned devices, leading to further lockdep splatter. Fixes: b0140891a8ce ("md: Fix race when creating a new md device.") Fixes: d62633873590 ("block: support delayed holder registration") Reported-by: syzbot+fadc0aaf497e6a493b9f@syzkaller.appspotmail.com Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: syzbot+fadc0aaf497e6a493b9f@syzkaller.appspotmail.com Reviewed-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-09-22kvm: x86: Add AMD PMU MSRs to msrs_to_save_all[]Fares Mehanna1-0/+7
Intel PMU MSRs is in msrs_to_save_all[], so add AMD PMU MSRs to have a consistent behavior between Intel and AMD when using KVM_GET_MSRS, KVM_SET_MSRS or KVM_GET_MSR_INDEX_LIST. We have to add legacy and new MSRs to handle guests running without X86_FEATURE_PERFCTR_CORE. Signed-off-by: Fares Mehanna <faresx@amazon.de> Message-Id: <20210915133951.22389-1-faresx@amazon.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: x86: nVMX: re-evaluate emulation_required on nested VM exitMaxim Levitsky3-4/+7
If L1 had invalid state on VM entry (can happen on SMM transactions when we enter from real mode, straight to nested guest), then after we load 'host' state from VMCS12, the state has to become valid again, but since we load the segment registers with __vmx_set_segment we weren't always updating emulation_required. Update emulation_required explicitly at end of load_vmcs12_host_state. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210913140954.165665-8-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-22KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if ↵Maxim Levitsky2-2/+10
!from_vmentry It is possible that when non root mode is entered via special entry (!from_vmentry), that is from SMM or from loading the nested state, the L2 state could be invalid in regard to non unrestricted guest mode, but later it can become valid. (for example when RSM emulation restores segment registers from SMRAM) Thus delay the check to VM entry, where we will check this and fail. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210913140954.165665-7-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 04:59:15 +0300