summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-01-20iavf: schedule watchdog immediately when changing primary MACStefan Assmann1-1/+1
iavf_replace_primary_mac() utilizes queue_work() to schedule the watchdog task but that only ensures that the watchdog task is queued to run. To make sure the watchdog is executed asap use mod_delayed_work(). Without this patch it may take up to 2s until the watchdog task gets executed, which may cause long delays when setting the MAC address. Fixes: a3e839d539e0 ("iavf: Add usage of new virtchnl format to set default MAC") Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-20iavf: Move netdev_update_features() into watchdog taskMarcin Szycik2-18/+17
Remove netdev_update_features() from iavf_adminq_task(), as it can cause deadlocks due to needing rtnl_lock. Instead use the IAVF_FLAG_SETUP_NETDEV_FEATURES flag to indicate that netdev features need to be updated in the watchdog task. iavf_set_vlan_offload_features() and iavf_set_queue_vlan_tag_loc() can be called directly from iavf_virtchnl_completion(). Suggested-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-20iavf: fix temporary deadlock and failure to set MAC addressMichal Schmidt4-51/+49
We are seeing an issue where setting the MAC address on iavf fails with EAGAIN after the 2.5s timeout expires in iavf_set_mac(). There is the following deadlock scenario: iavf_set_mac(), holding rtnl_lock, waits on: iavf_watchdog_task (within iavf_wq) to send a message to the PF, and iavf_adminq_task (within iavf_wq) to receive a response from the PF. In this adapter state (>=__IAVF_DOWN), these tasks do not need to take rtnl_lock, but iavf_wq is a global single-threaded workqueue, so they may get stuck waiting for another adapter's iavf_watchdog_task to run iavf_init_config_adapter(), which does take rtnl_lock. The deadlock resolves itself by the timeout in iavf_set_mac(), which results in EAGAIN returned to userspace. Let's break the deadlock loop by changing iavf_wq into a per-adapter workqueue, so that one adapter's tasks are not blocked by another's. Fixes: 35a2443d0910 ("iavf: Add waiting for response from PF in set mac") Co-developed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-20io_uring/msg_ring: fix remote queue to disabled ringPavel Begunkov2-2/+10
IORING_SETUP_R_DISABLED rings don't have the submitter task set, so it's not always safe to use ->submitter_task. Disallow posting msg_ring messaged to disabled rings. Also add task NULL check for loosy sync around testing for IORING_SETUP_R_DISABLED. Cc: stable@vger.kernel.org Fixes: 6d043ee1164ca ("io_uring: do msg_ring in target task via tw") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-20io_uring/msg_ring: fix flagging remote executionPavel Begunkov1-17/+23
There is a couple of problems with queueing a tw in io_msg_ring_data() for remote execution. First, once we queue it the target ring can go away and so setting IORING_SQ_TASKRUN there is not safe. Secondly, the userspace might not expect IORING_SQ_TASKRUN. Extract a helper and uniformly use TWA_SIGNAL without TWA_SIGNAL_NO_IPI tricks for now, just as it was done in the original patch. Cc: stable@vger.kernel.org Fixes: 6d043ee1164ca ("io_uring: do msg_ring in target task via tw") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-20Revert "Merge branch 'octeontx2-af-CPT'"Jakub Kicinski5-277/+87
This reverts commit b4fbf0b27fa9dd2594b3371532341bd4636a00f9, reversing changes made to 6c977c5c2e4c5d8ad1b604724cc344e38f96fe9b. This seems like net-next material. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-20bpf: Add missing btf_put to register_btf_id_dtor_kfuncsJiri Olsa1-2/+2
We take the BTF reference before we register dtors and we need to put it back when it's done. We probably won't se a problem with kernel BTF, but module BTF would stay loaded (because of the extra ref) even when its module is removed. Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com> Fixes: 5ce937d613a4 ("bpf: Populate pairs of btf_id and destructor kfunc in btf") Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20230120122148.1522359-1-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-20kvm/vfio: Fix potential deadlock on vfio group_lockYi Liu1-3/+3
Currently it is possible that the final put of a KVM reference comes from vfio during its device close operation. This occurs while the vfio group lock is held; however, if the vfio device is still in the kvm device list, then the following call chain could result in a deadlock: VFIO holds group->group_lock/group_rwsem -> kvm_put_kvm -> kvm_destroy_vm -> kvm_destroy_devices -> kvm_vfio_destroy -> kvm_vfio_file_set_kvm -> vfio_file_set_kvm -> try to hold group->group_lock/group_rwsem The key function is the kvm_destroy_devices() which triggers destroy cb of kvm_device_ops. It calls back to vfio and try to hold group_lock. So if this path doesn't call back to vfio, this dead lock would be fixed. Actually, there is a way for it. KVM provides another point to free the kvm-vfio device which is the point when the device file descriptor is closed. This can be achieved by providing the release cb instead of the destroy cb. Also rename kvm_vfio_destroy() to be kvm_vfio_release(). /* * Destroy is responsible for freeing dev. * * Destroy may be called before or after destructors are called * on emulated I/O regions, depending on whether a reference is * held by a vcpu or other kvm component that gets destroyed * after the emulated I/O. */ void (*destroy)(struct kvm_device *dev); /* * Release is an alternative method to free the device. It is * called when the device file descriptor is closed. Once * release is called, the destroy method will not be called * anymore as the device is removed from the device list of * the VM. kvm->lock is held. */ void (*release)(struct kvm_device *dev); Fixes: 421cfe6596f6 ("vfio: remove VFIO_GROUP_NOTIFY_SET_KVM") Reported-by: Alex Williamson <alex.williamson@redhat.com> Suggested-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20230114000351.115444-1-mjrosato@linux.ibm.com Link: https://lore.kernel.org/r/20230120150528.471752-1-yi.l.liu@intel.com [aw: update comment as well, s/destroy/release/] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-01-20Merge tag 'nvme-6.2-2023-01-20' of git://git.infradead.org/nvme into block-6.2Jens Axboe2-5/+21
Pull NVMe fixes from Christoph: "nvme fixes for Linux 6.2 - fix controller shutdown regression in nvme-apple (Janne Grunau) - fix a polling on timeout regression in nvme-pci (Keith Busch)" * tag 'nvme-6.2-2023-01-20' of git://git.infradead.org/nvme: nvme-pci: fix timeout request state check nvme-apple: only reset the controller when RTKit is running nvme-apple: reset controller during shutdown
2023-01-20USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100Greg Kroah-Hartman1-1/+1
The USB_DEVICE_ID_CODEMERCS_IOW100 header size was incorrect, it should be 12, not 13. Cc: stable <stable@kernel.org> Fixes: 17a82716587e ("USB: iowarrior: fix up report size handling for some devices") Reported-by: Christoph Jung <jung@codemercs.com> Link: https://lore.kernel.org/r/20230120135330.3842518-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20usb: host: ehci-fsl: Fix module aliasAlexander Stein1-1/+1
Commit ca07e1c1e4a6 ("drivers:usb:fsl:Make fsl ehci drv an independent driver module") changed DRV_NAME which was used for MODULE_ALIAS as well. Starting from this the module alias didn't match the platform device name created in fsl-mph-dr-of.c Change DRV_NAME to match the driver name for host mode in fsl-mph-dr-of. This is needed for module autoloading on ls1021a. Fixes: ca07e1c1e4a6 ("drivers:usb:fsl:Make fsl ehci drv an independent driver module") Cc: stable <stable@kernel.org> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20230120122714.3848784-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20tcp: fix rate_app_limited to default to 1David Morley1-0/+2
The initial default value of 0 for tp->rate_app_limited was incorrect, since a flow is indeed application-limited until it first sends data. Fixing the default to be 1 is generally correct but also specifically will help user-space applications avoid using the initial tcpi_delivery_rate value of 0 that persists until the connection has some non-zero bandwidth sample. Fixes: eb8329e0a04d ("tcp: export data delivery rate") Suggested-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David Morley <morleyd@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Tested-by: David Morley <morleyd@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20bnxt: Do not read past the end of test namesKees Cook2-17/+5
Test names were being concatenated based on a offset beyond the end of the first name, which tripped the buffer overflow detection logic: detected buffer overflow in strnlen [...] Call Trace: bnxt_ethtool_init.cold+0x18/0x18 Refactor struct hwrm_selftest_qlist_output to use an actual array, and adjust the concatenation to use snprintf() rather than a series of strncat() calls. Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com> Link: https://lore.kernel.org/lkml/Y8F%2F1w1AZTvLglFX@x1-carbon/ Tested-by: Niklas Cassel <Niklas.Cassel@wdc.com> Fixes: eb51365846bc ("bnxt_en: Add basic ethtool -t selftest support.") Cc: Michael Chan <michael.chan@broadcom.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20serial: exar: Add support for Sealevel 7xxxC serial cardsMatthew Howell1-0/+14
Add support for Sealevel 7xxxC serial cards. This patch: * Adds IDs to recognize 7xxxC cards from Sealevel Systems. * Updates exar_pci_probe() to set nr_ports to last two bytes of primary dev ID for these cards. Signed-off-by: Matthew Howell <matthew.howell@sealevel.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2301191440010.22558@tstest-VirtualBox Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20VMCI: Use threaded irqs instead of taskletsVishnu Dasa1-30/+19
The vmci_dispatch_dgs() tasklet function calls vmci_read_data() which uses wait_event() resulting in invalid sleep in an atomic context (and therefore potentially in a deadlock). Use threaded irqs to fix this issue and completely remove usage of tasklets. [ 20.264639] BUG: sleeping function called from invalid context at drivers/misc/vmw_vmci/vmci_guest.c:145 [ 20.264643] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 762, name: vmtoolsd [ 20.264645] preempt_count: 101, expected: 0 [ 20.264646] RCU nest depth: 0, expected: 0 [ 20.264647] 1 lock held by vmtoolsd/762: [ 20.264648] #0: ffff0000874ae440 (sk_lock-AF_VSOCK){+.+.}-{0:0}, at: vsock_connect+0x60/0x330 [vsock] [ 20.264658] Preemption disabled at: [ 20.264659] [<ffff80000151d7d8>] vmci_send_datagram+0x44/0xa0 [vmw_vmci] [ 20.264665] CPU: 0 PID: 762 Comm: vmtoolsd Not tainted 5.19.0-0.rc8.20220727git39c3c396f813.60.fc37.aarch64 #1 [ 20.264667] Hardware name: VMware, Inc. VBSA/VBSA, BIOS VEFI 12/31/2020 [ 20.264668] Call trace: [ 20.264669] dump_backtrace+0xc4/0x130 [ 20.264672] show_stack+0x24/0x80 [ 20.264673] dump_stack_lvl+0x88/0xb4 [ 20.264676] dump_stack+0x18/0x34 [ 20.264677] __might_resched+0x1a0/0x280 [ 20.264679] __might_sleep+0x58/0x90 [ 20.264681] vmci_read_data+0x74/0x120 [vmw_vmci] [ 20.264683] vmci_dispatch_dgs+0x64/0x204 [vmw_vmci] [ 20.264686] tasklet_action_common.constprop.0+0x13c/0x150 [ 20.264688] tasklet_action+0x40/0x50 [ 20.264689] __do_softirq+0x23c/0x6b4 [ 20.264690] __irq_exit_rcu+0x104/0x214 [ 20.264691] irq_exit_rcu+0x1c/0x50 [ 20.264693] el1_interrupt+0x38/0x6c [ 20.264695] el1h_64_irq_handler+0x18/0x24 [ 20.264696] el1h_64_irq+0x68/0x6c [ 20.264697] preempt_count_sub+0xa4/0xe0 [ 20.264698] _raw_spin_unlock_irqrestore+0x64/0xb0 [ 20.264701] vmci_send_datagram+0x7c/0xa0 [vmw_vmci] [ 20.264703] vmci_datagram_dispatch+0x84/0x100 [vmw_vmci] [ 20.264706] vmci_datagram_send+0x2c/0x40 [vmw_vmci] [ 20.264709] vmci_transport_send_control_pkt+0xb8/0x120 [vmw_vsock_vmci_transport] [ 20.264711] vmci_transport_connect+0x40/0x7c [vmw_vsock_vmci_transport] [ 20.264713] vsock_connect+0x278/0x330 [vsock] [ 20.264715] __sys_connect_file+0x8c/0xc0 [ 20.264718] __sys_connect+0x84/0xb4 [ 20.264720] __arm64_sys_connect+0x2c/0x3c [ 20.264721] invoke_syscall+0x78/0x100 [ 20.264723] el0_svc_common.constprop.0+0x68/0x124 [ 20.264724] do_el0_svc+0x38/0x4c [ 20.264725] el0_svc+0x60/0x180 [ 20.264726] el0t_64_sync_handler+0x11c/0x150 [ 20.264728] el0t_64_sync+0x190/0x194 Signed-off-by: Vishnu Dasa <vdasa@vmware.com> Suggested-by: Zack Rusin <zackr@vmware.com> Reported-by: Nadav Amit <namit@vmware.com> Reported-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Fixes: 463713eb6164 ("VMCI: dma dg: add support for DMA datagrams receive") Cc: <stable@vger.kernel.org> # v5.18+ Cc: VMware PV-Drivers Reviewers <pv-drivers@vmware.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Bryan Tan <bryantan@vmware.com> Reviewed-by: Bryan Tan <bryantan@vmware.com> Reviewed-by: Zack Rusin <zackr@vmware.com> Link: https://lore.kernel.org/r/20221130070511.46558-1-vdasa@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20misc: fastrpc: Pass bitfield into qcom_scm_assign_memElliot Berman1-9/+6
The srcvm parameter of qcom_scm_assign_mem is a pointer to a bitfield of VMIDs. The bitfield is updated with which VMIDs have permissions after the qcom_scm_assign_mem call. This makes it simpler for clients to make qcom_scm_assign_mem calls later, they always pass in same srcvm bitfield and do not need to closely track whether memory was originally shared. When restoring permissions to HLOS, fastrpc is incorrectly using the first VMID directly -- neither the BIT nor the other possible VMIDs the memory was already assigned to. We already have a field intended for this purpose: "perms" in the struct fastrpc_channel_ctx, but it was never used. Start using the perms field. Cc: Abel Vesa <abel.vesa@linaro.org> Cc: Vamsi Krishna Gattupalli <quic_vgattupa@quicinc.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Fixes: e90d91190619 ("misc: fastrpc: Add support to secure memory map") Fixes: 0871561055e6 ("misc: fastrpc: Add support for audiopd") Fixes: 532ad70c6d44 ("misc: fastrpc: Add mmap request assigning for static PD pool") Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Elliot Berman <quic_eberman@quicinc.com> drivers/misc/fastrpc.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) Link: https://lore.kernel.org/r/20230112182313.521467-1-quic_eberman@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20gsmi: fix null-deref in gsmi_get_variableKhazhismel Kumykov1-3/+4
We can get EFI variables without fetching the attribute, so we must allow for that in gsmi. commit 859748255b43 ("efi: pstore: Omit efivars caching EFI varstore access layer") added a new get_variable call with attr=NULL, which triggers panic in gsmi. Fixes: 74c5b31c6618 ("driver: Google EFI SMI") Cc: stable <stable@kernel.org> Signed-off-by: Khazhismel Kumykov <khazhy@google.com> Link: https://lore.kernel.org/r/20230118010212.1268474-1-khazhy@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20misc: fastrpc: Fix use-after-free race condition for mapsOla Jeppsson1-3/+5
It is possible that in between calling fastrpc_map_get() until map->fl->lock is taken in fastrpc_free_map(), another thread can call fastrpc_map_lookup() and get a reference to a map that is about to be deleted. Rewrite fastrpc_map_get() to only increase the reference count of a map if it's non-zero. Propagate this to callers so they can know if a map is about to be deleted. Fixes this warning: refcount_t: addition on 0; use-after-free. WARNING: CPU: 5 PID: 10100 at lib/refcount.c:25 refcount_warn_saturate ... Call trace: refcount_warn_saturate [fastrpc_map_get inlined] [fastrpc_map_lookup inlined] fastrpc_map_create fastrpc_internal_invoke fastrpc_device_ioctl __arm64_sys_ioctl invoke_syscall Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method") Cc: stable <stable@kernel.org> Signed-off-by: Ola Jeppsson <ola@snap.com> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221124174941.418450-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20misc: fastrpc: Don't remove map on creater_process and device_releaseAbel Vesa1-9/+9
Do not remove the map from the list on error path in fastrpc_init_create_process, instead call fastrpc_map_put, to avoid use-after-free. Do not remove it on fastrpc_device_release either, call fastrpc_map_put instead. The fastrpc_free_map is the only proper place to remove the map. This is called only after the reference count is 0. Fixes: b49f6d83e290 ("misc: fastrpc: Fix a possible double free") Cc: stable <stable@kernel.org> Co-developed-by: Ola Jeppsson <ola@snap.com> Signed-off-by: Ola Jeppsson <ola@snap.com> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221124174941.418450-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20misc: fastrpc: Fix use-after-free and race in fastrpc_map_findAbel Vesa1-20/+21
Currently, there is a race window between the point when the mutex is unlocked in fastrpc_map_lookup and the reference count increasing (fastrpc_map_get) in fastrpc_map_find, which can also lead to use-after-free. So lets merge fastrpc_map_find into fastrpc_map_lookup which allows us to both protect the maps list by also taking the &fl->lock spinlock and the reference count, since the spinlock will be released only after. Add take_ref argument to make this suitable for all callers. Fixes: 8f6c1d8c4f0c ("misc: fastrpc: Add fdlist implementation") Cc: stable <stable@kernel.org> Co-developed-by: Ola Jeppsson <ola@snap.com> Signed-off-by: Ola Jeppsson <ola@snap.com> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221124174941.418450-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20misc: fastrpc: fix error code in fastrpc_req_mmap()Dan Carpenter1-1/+0
The "err" variable shadows an earlier global variable so this code returns success instead of a negative error code. Fixes: 532ad70c6d44 ("misc: fastrpc: Add mmap request assigning for static PD pool") Signed-off-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/Y4XUrMETCl1O6t0A@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20mei: me: add meteor lake point M DIDAlexander Usyskin2-0/+4
Add Meteor Lake Point M device id. Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20221212220247.286019-2-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20mei: bus: fix unlink on bus in error pathAlexander Usyskin1-4/+8
Unconditional call to mei_cl_unlink in mei_cl_bus_dev_release leads to call of the mei_cl_unlink without corresponding mei_cl_link. This leads to miscalculation of open_handle_count (decrease without increase). Call unlink in mei_cldev_enable fail path and remove blanket unlink from mei_cl_bus_dev_release. Fixes: 34f1166afd67 ("mei: bus: need to unlink client before freeing") Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Reviewed-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20221212220247.286019-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20Merge tag 'icc-6.2-rc5' of ↵Greg Kroah-Hartman3-7/+38
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus Georgi writes: interconnect fixes for v6.2-rc This contains fixes for a rare boot hang issue that has been reported on the db820c dragonboard. - dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC - interconnect: qcom: msm8996: Provide UFS clocks to A2NoC - interconnect: qcom: msm8996: Fix regmap max_register values - interconnect: qcom: rpm: Use _optional func for provider clocks Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: qcom: rpm: Use _optional func for provider clocks interconnect: qcom: msm8996: Fix regmap max_register values interconnect: qcom: msm8996: Provide UFS clocks to A2NoC dt-bindings: interconnect: Add UFS clocks to MSM8996 A2NoC
2023-01-20Revert "serial: stm32: Merge hard IRQ and threaded IRQ handling into single ↵Greg Kroah-Hartman1-4/+27
IRQ handler" This reverts commit f24771b62a83239f0dce816bddf0f6807f436235 as it is reported to break the build. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/202301200130.ttBiTzfO-lkp@intel.com Fixes: f24771b62a83 ("serial: stm32: Merge hard IRQ and threaded IRQ handling into single IRQ handler") Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Valentin Caron <valentin.caron@foss.st.com> # V3 Cc: Marek Vasut <marex@denx.de> Cc: Johan Hovold <johan@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-20firmware: zynqmp: fix declarations for gcc-13Arnd Bergmann1-4/+4
gcc-13.0.1 reports a type mismatch for two functions: drivers/firmware/xilinx/zynqmp.c:1228:5: error: conflicting types for 'zynqmp_pm_set_rpu_mode' due to enum/integer mismatch; have 'int(u32, enum rpu_oper_mode)' {aka 'int(unsigned int, enum rpu_oper_mode)'} [-Werror=enum-int-mismatch] 1228 | int zynqmp_pm_set_rpu_mode(u32 node_id, enum rpu_oper_mode rpu_mode) | ^~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/firmware/xilinx/zynqmp.c:25: include/linux/firmware/xlnx-zynqmp.h:552:5: note: previous declaration of 'zynqmp_pm_set_rpu_mode' with type 'int(u32, u32)' {aka 'int(unsigned int, unsigned int)'} 552 | int zynqmp_pm_set_rpu_mode(u32 node_id, u32 arg1); | ^~~~~~~~~~~~~~~~~~~~~~ drivers/firmware/xilinx/zynqmp.c:1246:5: error: conflicting types for 'zynqmp_pm_set_tcm_config' due to enum/integer mismatch; have 'int(u32, enum rpu_tcm_comb)' {aka 'int(unsigned int, enum rpu_tcm_comb)'} [-Werror=enum-int-mismatch] 1246 | int zynqmp_pm_set_tcm_config(u32 node_id, enum rpu_tcm_comb tcm_mode) | ^~~~~~~~~~~~~~~~~~~~~~~~ include/linux/firmware/xlnx-zynqmp.h:553:5: note: previous declaration of 'zynqmp_pm_set_tcm_config' with type 'int(u32, u32)' {aka 'int(unsigned int, unsigned int)'} 553 | int zynqmp_pm_set_tcm_config(u32 node_id, u32 arg1); | ^~~~~~~~~~~~~~~~~~~~~~~~ Change the declaration in the header to match the function definition. Acked-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-20Merge tag 'at91-fixes-6.2' of ↵Arnd Bergmann1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes AT91 fixes for 6.2: It contains: - fix the clock provided via DT for DDR controller on SAM9X60 * tag 'at91-fixes-6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sam9x60: fix the ddr clock for sam9x60 Link: https://lore.kernel.org/r/20230119112101.42045-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-20Merge tag 'stm32-dt-for-v6.2-fixes-1' of ↵Arnd Bergmann4-8/+24
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes STM32 DT fixes for v6.2, round 1 Highlights: ----------- -STM32MP15: - Fix missing chip select phandle in several stm32mp15x based boards. * tag 'stm32-dt-for-v6.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp157c-emstamp-argon ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som Link: https://lore.kernel.org/r/3fe26bf9-297b-5c78-682b-37fa6d8b6190@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-20net: stmmac: enable all safety features by defaultAndrew Halaney1-0/+14
In the original implementation of dwmac5 commit 8bf993a5877e ("net: stmmac: Add support for DWMAC5 and implement Safety Features") all safety features were enabled by default. Later it seems some implementations didn't have support for all the features, so in commit 5ac712dcdfef ("net: stmmac: enable platform specific safety features") the safety_feat_cfg structure was added to the callback and defined for some platforms to selectively enable these safety features. The problem is that only certain platforms were given that software support. If the automotive safety package bit is set in the hardware features register the safety feature callback is called for the platform, and for platforms that didn't get a safety_feat_cfg defined this results in the following NULL pointer dereference: [ 7.933303] Call trace: [ 7.935812] dwmac5_safety_feat_config+0x20/0x170 [stmmac] [ 7.941455] __stmmac_open+0x16c/0x474 [stmmac] [ 7.946117] stmmac_open+0x38/0x70 [stmmac] [ 7.950414] __dev_open+0x100/0x1dc [ 7.954006] __dev_change_flags+0x18c/0x204 [ 7.958297] dev_change_flags+0x24/0x6c [ 7.962237] do_setlink+0x2b8/0xfa4 [ 7.965827] __rtnl_newlink+0x4ec/0x840 [ 7.969766] rtnl_newlink+0x50/0x80 [ 7.973353] rtnetlink_rcv_msg+0x12c/0x374 [ 7.977557] netlink_rcv_skb+0x5c/0x130 [ 7.981500] rtnetlink_rcv+0x18/0x2c [ 7.985172] netlink_unicast+0x2e8/0x340 [ 7.989197] netlink_sendmsg+0x1a8/0x420 [ 7.993222] ____sys_sendmsg+0x218/0x280 [ 7.997249] ___sys_sendmsg+0xac/0x100 [ 8.001103] __sys_sendmsg+0x84/0xe0 [ 8.004776] __arm64_sys_sendmsg+0x24/0x30 [ 8.008983] invoke_syscall+0x48/0x114 [ 8.012840] el0_svc_common.constprop.0+0xcc/0xec [ 8.017665] do_el0_svc+0x38/0xb0 [ 8.021071] el0_svc+0x2c/0x84 [ 8.024212] el0t_64_sync_handler+0xf4/0x120 [ 8.028598] el0t_64_sync+0x190/0x194 Go back to the original behavior, if the automotive safety package is found to be supported in hardware enable all the features unless safety_feat_cfg is passed in saying this particular platform only supports a subset of the features. Fixes: 5ac712dcdfef ("net: stmmac: enable platform specific safety features") Reported-by: Ning Cai <ncai@quicinc.com> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20Merge branch 'octeontx2-af-CPT'David S. Miller5-87/+277
Srujana Challa says: ==================== octeontx2-af: Miscellaneous changes for CPT This patchset consists of miscellaneous changes for CPT. - Adds a new mailbox to reset the requested CPT LF. - Modify FLR sequence as per HW team suggested. - Adds support to recover CPT engines when they gets fault. - Updates CPT inbound inline IPsec configuration mailbox, as per new generation of the OcteonTX2 chips. - Adds a new mailbox to return CPT FLT Interrupt info. --- v2: - Addressed a review comment. v1: - Dropped patch "octeontx2-af: Fix interrupt name strings completely" to submit to net. --- ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20octeontx2-af: add mbox to return CPT_AF_FLT_INT infoSrujana Challa3-0/+56
CPT HW would trigger the CPT AF FLT interrupt when CPT engines hits some uncorrectable errors and AF is the one which receives the interrupt and recovers the engines. This patch adds a mailbox for CPT VFs to request for CPT faulted and recovered engines info. Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20octeontx2-af: update cpt lf alloc mailboxSrujana Challa2-3/+9
The CN10K CPT coprocessor contains a context processor to accelerate updates to the IPsec security association contexts. The context processor contains a context cache. This patch updates CPT LF ALLOC mailbox to config ctx_ilen requested by VFs. CPT_LF_ALLOC:ctx_ilen is the size of initial context fetch. Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20octeontx2-af: restore rxc conf after teardown sequenceNithin Dabilpuram1-4/+18
CN10K CPT coprocessor includes a component named RXC which is responsible for reassembly of inner IP packets. RXC has the feature to evict oldest entries based on age/threshold. The age/threshold is being set to minimum values to evict all entries at the time of teardown. This patch adds code to restore timeout and threshold config after teardown sequence is complete as it is global config. Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20octeontx2-af: optimize cpt pf identificationSrujana Challa3-3/+20
Optimize CPT PF identification in mbox handling for faster mbox response by doing it at AF driver probe instead of every mbox message. Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20octeontx2-af: modify FLR sequence for CPTSrujana Challa3-47/+53
On OcteonTX2 platform CPT instruction enqueue is only possible via LMTST operations. The existing FLR sequence mentioned in HRM requires a dummy LMTST to CPT but LMTST can't be submitted from AF driver. So, HW team provided a new sequence to avoid dummy LMTST. This patch adds code for the same. Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20octeontx2-af: add mbox for CPT LF resetSrujana Challa2-0/+41
On OcteonTX2 SoC, the admin function (AF) is the only one with all priviliges to configure HW and alloc resources, PFs and it's VFs have to request AF via mailbox for all their needs. This patch adds a new mailbox for CPT VFs to request for CPT LF reset. Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20octeontx2-af: recover CPT engine when it gets faultSrujana Challa1-30/+80
When CPT engine has uncorrectable errors, it will get halted and must be disabled and re-enabled. This patch adds code for the same. Signed-off-by: Srujana Challa <schalla@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-20Merge tag 'amd-drm-fixes-6.2-2023-01-19' of ↵Dave Airlie8-18/+33
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.2-2023-01-19: amdgpu: - Fix display scaling - Fix RN/CZN power reporting on some firmware versions - Colorspace fixes - Fix resource freeing in error case in CS IOCTL - Fix warning on driver unload - GC11 fixes - DCN 3.1.4/5 S/G display workarounds Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230119195908.7670-1-alexander.deucher@amd.com
2023-01-20Merge tag 'drm-misc-fixes-2023-01-19' of ↵Dave Airlie5-10/+17
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes A fix for vc4 to address a memory leak when allocating a buffer, a Kconfig fix for panfrost and two fixes for i915 and fb-helper to address some bugs with vga-switcheroo. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230119082059.h32bs7zqoxmjbcvn@houat
2023-01-20Merge tag 'drm-intel-fixes-2023-01-19' of ↵Dave Airlie5-10/+23
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Reject display plane with height == 0 (Drew) - re-disable RC6p on Sandy Bridge (Sasa) - Fix hugepages' selftest (Chris) - DG2 hw workarounds (Matt Atwood) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y8mf3/ANNWctpc7R@intel.com
2023-01-20Merge tag 'perf-tools-fixes-for-v6.2-3-2023-01-19' of ↵Linus Torvalds9-7/+54
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Prevent reading into undefined memory in the expression lexer, accounting for a trailer backslash followed by the null byte. - Fix file mode when copying files to the build id cache, the problem happens when the cache directory is in a different file system than the file being cached, otherwise the mode was preserved as only a hard link would be done to save space. - Fix a related build-id 'perf test' entry that checked that permission when caching PE (Portable Executable) files, used when profiling Windows executables under wine. - Sync the tools/ copies of kvm headers, build_bug.h, socket.h and arm64's cputype.h with the kernel sources. * tag 'perf-tools-fixes-for-v6.2-3-2023-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf test build-id: Fix test check for PE file perf buildid-cache: Fix the file mode with copyfile() while adding file to build-id cache perf expr: Prevent normalize() from reading into undefined memory in the expression lexer tools headers: Syncronize linux/build_bug.h with the kernel sources perf beauty: Update copy of linux/socket.h with the kernel sources tools headers arm64: Sync arm64's cputype.h with the kernel sources tools kvm headers arm64: Update KVM header from the kernel sources tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources tools headers UAPI: Sync linux/kvm.h with the kernel sources
2023-01-20Merge branch 'bpf: Fix to preserve reg parent/live fields when copying range ↵Alexei Starovoitov2-7/+54
info' Eduard Zingerman says: ==================== Struct bpf_reg_state is copied directly in several places including: - check_stack_write_fixed_off() (via save_register_state()); - check_stack_read_fixed_off(); - find_equal_scalars(). However, a literal copy of this struct also copies the following fields: struct bpf_reg_state { ... struct bpf_reg_state *parent; ... enum bpf_reg_liveness live; ... }; This breaks register parentage chain and liveness marking logic. The commit message for the first patch has a detailed example. This patch-set replaces direct copies with a call to a function copy_register_state(dst,src), which preserves 'parent' and 'live' fields of the 'dst'. The fix comes with a significant verifier runtime penalty for some selftest binaries listed in tools/testing/selftests/bpf/veristat.cfg and cilium BPF binaries (see [1]): $ ./veristat -e file,prog,states -C -f 'states_diff>10' master-baseline.log current.log File Program States (A) States (B) States (DIFF) -------------------------- -------------------------------- ---------- ---------- --------------- bpf_host.o tail_handle_ipv4_from_host 231 299 +68 (+29.44%) bpf_host.o tail_handle_nat_fwd_ipv4 1088 1320 +232 (+21.32%) bpf_host.o tail_handle_nat_fwd_ipv6 716 729 +13 (+1.82%) bpf_host.o tail_nodeport_nat_ingress_ipv4 281 314 +33 (+11.74%) bpf_host.o tail_nodeport_nat_ingress_ipv6 245 256 +11 (+4.49%) bpf_lxc.o tail_handle_nat_fwd_ipv4 1088 1320 +232 (+21.32%) bpf_lxc.o tail_handle_nat_fwd_ipv6 716 729 +13 (+1.82%) bpf_lxc.o tail_ipv4_ct_egress 239 262 +23 (+9.62%) bpf_lxc.o tail_ipv4_ct_ingress 239 262 +23 (+9.62%) bpf_lxc.o tail_ipv4_ct_ingress_policy_only 239 262 +23 (+9.62%) bpf_lxc.o tail_ipv6_ct_egress 181 195 +14 (+7.73%) bpf_lxc.o tail_ipv6_ct_ingress 181 195 +14 (+7.73%) bpf_lxc.o tail_ipv6_ct_ingress_policy_only 181 195 +14 (+7.73%) bpf_lxc.o tail_nodeport_nat_ingress_ipv4 281 314 +33 (+11.74%) bpf_lxc.o tail_nodeport_nat_ingress_ipv6 245 256 +11 (+4.49%) bpf_overlay.o tail_handle_nat_fwd_ipv4 799 829 +30 (+3.75%) bpf_overlay.o tail_nodeport_nat_ingress_ipv4 281 314 +33 (+11.74%) bpf_overlay.o tail_nodeport_nat_ingress_ipv6 245 256 +11 (+4.49%) bpf_sock.o cil_sock4_connect 47 70 +23 (+48.94%) bpf_sock.o cil_sock4_sendmsg 45 68 +23 (+51.11%) bpf_sock.o cil_sock6_post_bind 31 42 +11 (+35.48%) bpf_xdp.o tail_lb_ipv4 4413 6457 +2044 (+46.32%) bpf_xdp.o tail_lb_ipv6 6876 7249 +373 (+5.42%) test_cls_redirect.bpf.o cls_redirect 4704 4799 +95 (+2.02%) test_tcp_hdr_options.bpf.o estab 180 206 +26 (+14.44%) xdp_synproxy_kern.bpf.o syncookie_tc 21059 21485 +426 (+2.02%) xdp_synproxy_kern.bpf.o syncookie_xdp 21857 23122 +1265 (+5.79%) -------------------------- -------------------------------- ---------- ---------- --------------- I looked through verification log for bpf_xdp.o tail_lb_ipv4 program in order to identify the reason for ~50% visited states increase. The slowdown is triggered by a difference in handling of three stack slots: fp-56, fp-72 and fp-80, with the main difference coming from fp-72. In fact the following change removes all the difference: @@ -3256,7 +3256,10 @@ static void save_register_state(struct bpf_func_state *state, { int i; - copy_register_state(&state->stack[spi].spilled_ptr, reg); + if ((spi == 6 /*56*/ || spi == 8 /*72*/ || spi == 9 /*80*/) && size != BPF_REG_SIZE) + state->stack[spi].spilled_ptr = *reg; + else + copy_register_state(&state->stack[spi].spilled_ptr, reg); For fp-56 I found the following pattern for divergences between verification logs with and w/o this patch: - At some point insn 1862 is reached and checkpoint is created; - At some other point insn 1862 is reached again: - with this patch: - the current state is considered *not* equivalent to the old checkpoint; - the reason for mismatch is the state of fp-56: - current state: fp-56=????mmmm - checkpoint: fp-56_rD=mmmmmmmm - without this patch the current state is considered equivalent to the checkpoint, the fp-56 is not present in the checkpoint. Here is a fragment of the verification log for when the checkpoint in question created at insn 1862: checkpoint 1862: ... fp-56=mmmmmmmm ... 1862: ... 1863: ... 1864: (61) r1 = *(u32 *)(r0 +0) 1865: ... 1866: (63) *(u32 *)(r10 -56) = r1 ; R1_w=scalar(...) R10=fp0 fp-56= 1867: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 1868: (07) r2 += -56 ; R2_w=fp-56 ; return map_lookup_elem(&LB4_BACKEND_MAP_V2, &backend_id); 1869: (18) r1 = 0xffff888100286000 ; R1_w=map_ptr(off=0,ks=4,vs=8,imm=0) 1871: (85) call bpf_map_lookup_elem#1 - Without this patch: - at insn 1864 r1 liveness is set to REG_LIVE_WRITTEN; - at insn 1866 fp-56 liveness is set REG_LIVE_WRITTEN mark because of the direct r1 copy in save_register_state(); - at insn 1871 REG_LIVE_READ is not propagated to fp-56 at checkpoint 1862 because of the REG_LIVE_WRITTEN mark; - eventually fp-56 is pruned from checkpoint at 1862 in clean_func_state(). - With this patch: - at insn 1864 r1 liveness is set to REG_LIVE_WRITTEN; - at insn 1866 fp-56 liveness is *not* set to REG_LIVE_WRITTEN mark because write size is not equal to BPF_REG_SIZE; - at insn 1871 REG_LIVE_READ is propagated to fp-56 at checkpoint 1862. Hence more states have to be visited by verifier with this patch compared to current master. Similar patterns could be found for both fp-72 and fp-80, although these are harder to track trough the log because of a big number of insns between slot write and bpf_map_lookup_elem() call triggering read mark, boils down to the following C code: struct ipv4_frag_id frag_id = { .daddr = ip4->daddr, .saddr = ip4->saddr, .id = ip4->id, .proto = ip4->protocol, .pad = 0, }; ... map_lookup_elem(..., &frag_id); Where: - .id is mapped to fp-72, write of size u16; - .saddr is mapped to fp-80, write of size u32. This patch-set is a continuation of discussion from [2]. Changes v1 -> v2 (no changes in the code itself): - added analysis for the tail_lb_ipv4 verification slowdown; - rebase against fresh master branch. [1] git@github.com:anakryiko/cilium.git [2] https://lore.kernel.org/bpf/517af2c57ee4b9ce2d96a8cf33f7295f2d2dfe13.camel@gmail.com/ ==================== Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-20selftests/bpf: Verify copy_register_state() preserves parent/live fieldsEduard Zingerman1-0/+36
A testcase to check that verifier.c:copy_register_state() preserves register parentage chain and livness information. Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230106142214.1040390-3-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-20bpf: Fix to preserve reg parent/live fields when copying range infoEduard Zingerman1-7/+18
Register range information is copied in several places. The intent is to transfer range/id information from one register/stack spill to another. Currently this is done using direct register assignment, e.g.: static void find_equal_scalars(..., struct bpf_reg_state *known_reg) { ... struct bpf_reg_state *reg; ... *reg = *known_reg; ... } However, such assignments also copy the following bpf_reg_state fields: struct bpf_reg_state { ... struct bpf_reg_state *parent; ... enum bpf_reg_liveness live; ... }; Copying of these fields is accidental and incorrect, as could be demonstrated by the following example: 0: call ktime_get_ns() 1: r6 = r0 2: call ktime_get_ns() 3: r7 = r0 4: if r0 > r6 goto +1 ; r0 & r6 are unbound thus generated ; branch states are identical 5: *(u64 *)(r10 - 8) = 0xdeadbeef ; 64-bit write to fp[-8] --- checkpoint --- 6: r1 = 42 ; r1 marked as written 7: *(u8 *)(r10 - 8) = r1 ; 8-bit write, fp[-8] parent & live ; overwritten 8: r2 = *(u64 *)(r10 - 8) 9: r0 = 0 10: exit This example is unsafe because 64-bit write to fp[-8] at (5) is conditional, thus not all bytes of fp[-8] are guaranteed to be set when it is read at (8). However, currently the example passes verification. First, the execution path 1-10 is examined by verifier. Suppose that a new checkpoint is created by is_state_visited() at (6). After checkpoint creation: - r1.parent points to checkpoint.r1, - fp[-8].parent points to checkpoint.fp[-8]. At (6) the r1.live is set to REG_LIVE_WRITTEN. At (7) the fp[-8].parent is set to r1.parent and fp[-8].live is set to REG_LIVE_WRITTEN, because of the following code called in check_stack_write_fixed_off(): static void save_register_state(struct bpf_func_state *state, int spi, struct bpf_reg_state *reg, int size) { ... state->stack[spi].spilled_ptr = *reg; // <--- parent & live copied if (size == BPF_REG_SIZE) state->stack[spi].spilled_ptr.live |= REG_LIVE_WRITTEN; ... } Note the intent to mark stack spill as written only if 8 bytes are spilled to a slot, however this intent is spoiled by a 'live' field copy. At (8) the checkpoint.fp[-8] should be marked as REG_LIVE_READ but this does not happen: - fp[-8] in a current state is already marked as REG_LIVE_WRITTEN; - fp[-8].parent points to checkpoint.r1, parentage chain is used by mark_reg_read() to mark checkpoint states. At (10) the verification is finished for path 1-10 and jump 4-6 is examined. The checkpoint.fp[-8] never gets REG_LIVE_READ mark and this spill is pruned from the cached states by clean_live_states(). Hence verifier state obtained via path 1-4,6 is deemed identical to one obtained via path 1-6 and program marked as safe. Note: the example should be executed with BPF_F_TEST_STATE_FREQ flag set to force creation of intermediate verifier states. This commit revisits the locations where bpf_reg_state instances are copied and replaces the direct copies with a call to a function copy_register_state(dst, src) that preserves 'parent' and 'live' fields of the 'dst'. Fixes: 679c782de14b ("bpf/verifier: per-register parent pointers") Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230106142214.1040390-2-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-20Merge tag 'drm-msm-fixes-2023-01-16' of ↵Dave Airlie4-4/+19
https://gitlab.freedesktop.org/drm/msm into drm-fixes msm-fixes for v6.3-rc5 Two GPU fixes which were meant to be part of the previous pull request, but I'd forgotten to fetch from gitlab after the MR was merged so that git tag was applied to the wrong commit. - kexec shutdown fix - fix potential double free Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGskguoVsz2wqAK2k+f32LwcVY5JC6+e2RwLqZswz3RY2Q@mail.gmail.com
2023-01-19Merge tag 'printk-for-6.2-rc5' of ↵Linus Torvalds3-15/+12
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk fixes from Petr Mladek: - Prevent a potential deadlock when configuring kgdb console - Fix a kernel doc warning * tag 'printk-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: kernel/printk/printk.c: Fix W=1 kernel-doc warning tty: serial: kgdboc: fix mutex locking order for configure_kgdboc()
2023-01-19Merge tag 's390-6.2-3' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 build fix from Heiko Carstens: - Workaround invalid gcc-11 out of bounds read warning caused by s390's S390_lowcore definition. This happens only with gcc 11.1.0 and 11.2.0. The code which causes this warning will be gone with the next merge window. Therefore just replace the memcpy() with a for loop to get rid of the warning. * tag 's390-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: workaround invalid gcc-11 out of bounds read warning
2023-01-19Merge tag 'slab-for-6.2-rc5' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab Pull slab fix from Vlastimil Babka: "Just a single fix, since the lkp report originally for a slub-tiny commit ended up being a gcov/compiler bug: - periodically resched in SLAB's drain_freelist(), by David Rientjes" * tag 'slab-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: mm, slab: periodically resched in drain_freelist()
2023-01-19thermal: core: call put_device() only after device_register() failsViresh Kumar1-3/+10
put_device() shouldn't be called before a prior call to device_register(). __thermal_cooling_device_register() doesn't follow that properly and needs fixing. Also thermal_cooling_device_destroy_sysfs() is getting called unnecessarily on few error paths. Fix all this by placing the calls at the right place. Based on initial work done by Caleb Connolly. Fixes: 4748f9687caa ("thermal: core: fix some possible name leaks in error paths") Fixes: c408b3d1d9bb ("thermal: Validate new state in cur_state_store()") Reported-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Tested-by: Frank Rowand <frowand.list@gmail.com> Reviewed-by: Yang Yingliang <yangyingliang@huawei.com> Tested-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-19Merge tag 'usb-serial-6.2-rc5' of ↵Greg Kroah-Hartman2-0/+18
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: "USB-serial fixes for 6.2-rc5 Here are some new device ids, mostly for Quectel modems. All have been in linux-next with no reported issues." * tag 'usb-serial-6.2-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Quectel EM05CN modem USB: serial: option: add Quectel EM05CN (SG) modem USB: serial: cp210x: add SCALANCE LPE-9000 device id USB: serial: option: add Quectel EC200U modem USB: serial: option: add Quectel EM05-G (RS) modem USB: serial: option: add Quectel EM05-G (GR) modem USB: serial: option: add Quectel EM05-G (CS) modem
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 20:03:37 +0300