summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-08-15nfsd: fix dentry leak upon mkdir failure.Tetsuo Handa1-0/+1
syzbot is reporting that nfsd_mkdir() forgot to remove dentry created by d_alloc_name() when __nfsd_mkdir() failed (due to memory allocation fault injection) [1]. [1] https://syzkaller.appspot.com/bug?id=ce41a1f769ea4637ebffedf004a803e8405b4674 Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot <syzbot+2c95195d5d433f6ed6cb@syzkaller.appspotmail.com> Fixes: e8a79fb14f6b76b5 ("nfsd: add nfsd/clients directory") [bfields: clean up in nfsd_mkdir instead of __nfsd_mkdir] Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-08-15net/mlx5e: Fix compatibility issue with ethtool flash deviceEran Ben Elisha3-0/+46
Cited patch deleted ethtool flash device support, as ethtool core can fallback into devlink flash callback. However, this is supported only if there is a devlink port registered over the corresponding netdevice. As mlx5e do not have devlink port support over native netdevice, it broke the ability to flash device via ethtool. This patch re-add the ethtool callback to avoid user functionality breakage when trying to flash device via ethtool. Fixes: 9c8bca2637b8 ("mlx5: Move firmware flash implementation to devlink") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-15net/mlx5e: Fix a race with XSKICOSQ in XSK wakeup flowMaxim Mikityanskiy1-0/+3
Add a missing spinlock around XSKICOSQ usage at the activation stage, because there is a race between a configuration change and the application calling sendto(). Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-15selftests: net: tcp_fastopen_backup_key.sh: fix shellcheck issueAnders Roxell1-1/+1
When running tcp_fastopen_backup_key.sh the following issue was seen in a busybox environment. ./tcp_fastopen_backup_key.sh: line 33: [: -ne: unary operator expected Shellcheck showed the following issue. $ shellcheck tools/testing/selftests/net/tcp_fastopen_backup_key.sh In tools/testing/selftests/net/tcp_fastopen_backup_key.sh line 33: if [ $val -ne 0 ]; then ^-- SC2086: Double quote to prevent globbing and word splitting. Rework to do a string comparison instead. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15io_uring: fix an issue when IOSQE_IO_LINK is inserted into defer listJackie Liu1-7/+9
This patch may fix two issues: First, when IOSQE_IO_DRAIN set, the next IOs need to be inserted into defer list to delay execution, but link io will be actively scheduled to run by calling io_queue_sqe. Second, when multiple LINK_IOs are inserted together with defer_list, the LINK_IO is no longer keep order. |-------------| | LINK_IO | ----> insert to defer_list ----------- |-------------| | | LINK_IO | ----> insert to defer_list ----------| |-------------| | | LINK_IO | ----> insert to defer_list ----------| |-------------| | | NORMAL_IO | ----> insert to defer_list ----------| |-------------| | | queue_work at same time <-----| Fixes: 9e645e1105c ("io_uring: add support for sqe links") Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-15Documentation PCI: Fix pciebus-howto.rst filename typoBjorn Helgaas2-1/+1
2e6422444894 ("Documentation: PCI: convert PCIEBUS-HOWTO.txt to reST") incorrectly renamed PCIEBUS-HOWTO.txt to picebus-howto.rst. Rename it to pciebus-howto.rst. Fixes: 2e6422444894 ("Documentation: PCI: convert PCIEBUS-HOWTO.txt to reST") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-15block: remove REQ_NOWAIT_INLINEJens Axboe3-54/+8
We had a few issues with this code, and there's still a problem around how we deal with error handling for chained/split bios. For now, just revert the code and we'll try again with a thoroug solution. This reverts commits: e15c2ffa1091 ("block: fix O_DIRECT error handling for bio fragments") 0eb6ddfb865c ("block: Fix __blkdev_direct_IO() for bio fragments") 6a43074e2f46 ("block: properly handle IOCB_NOWAIT for async O_DIRECT IO") 893a1c97205a ("blk-mq: allow REQ_NOWAIT to return an error inline") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-15io_uring: fix manual setup of iov_iter for fixed buffersAleix Roca Nonell1-3/+1
Commit bd11b3a391e3 ("io_uring: don't use iov_iter_advance() for fixed buffers") introduced an optimization to avoid using the slow iov_iter_advance by manually populating the iov_iter iterator in some cases. However, the computation of the iterator count field was erroneous: The first bvec was always accounted for an extent of page size even if the bvec length was smaller. In consequence, some I/O operations on fixed buffers were unable to operate on the full extent of the buffer, consistently skipping some bytes at the end of it. Fixes: bd11b3a391e3 ("io_uring: don't use iov_iter_advance() for fixed buffers") Cc: stable@vger.kernel.org Signed-off-by: Aleix Roca Nonell <aleix.rocanonell@bsc.es> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-15PCI: Reset both NVIDIA GPU and HDA in ThinkPad P50 workaroundLyude Paul1-1/+1
quirk_reset_lenovo_thinkpad_50_nvgpu() resets NVIDIA GPUs to work around an apparent BIOS defect. It previously used pci_reset_function(), and the available method was a bus reset, which was fine because there was only one function on the bus. After b516ea586d71 ("PCI: Enable NVIDIA HDA controllers"), there are now two functions (the HDA controller and the GPU itself) on the bus, so the reset fails. Use pci_reset_bus() explicitly instead of pci_reset_function() since it's OK to reset both devices. [bhelgaas: commit log, add e0547c81bfcf] Fixes: b516ea586d71 ("PCI: Enable NVIDIA HDA controllers") Fixes: e0547c81bfcf ("PCI: Reset Lenovo ThinkPad P50 nvgpu at boot if necessary") Link: https://lore.kernel.org/r/20190801220117.14952-1-lyude@redhat.com Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Ben Skeggs <bskeggs@redhat.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Daniel Drake <drake@endlessm.com> Cc: Aaron Plattner <aplattner@nvidia.com> Cc: Peter Wu <peter@lekensteyn.nl> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Karol Herbst <kherbst@redhat.com> Cc: Maik Freudenberg <hhfeuer@gmx.de>
2019-08-15Merge tag 'auxdisplay-for-linus-v5.3-rc5' of git://github.com/ojeda/linuxLinus Torvalds6-5/+16
Pull auxdisplay fixes from Miguel Ojeda: "A few minor auxdisplay improvements: - A couple of small header cleanups for charlcd (Masahiro Yamada) - A trivial typo fix for the examples of cfag12864b (Masahiro Yamada) - An Kconfig help text improvement for charlcd (Mans Rullgard) - An error path fix for panel (zhengbin)" * tag 'auxdisplay-for-linus-v5.3-rc5' of git://github.com/ojeda/linux: auxdisplay: Fix a typo in cfag12864b-example.c auxdisplay: charlcd: add include guard to charlcd.h auxdisplay: charlcd: move charlcd.h to drivers/auxdisplay auxdisplay: charlcd: add help text for backlight initial state auxdisplay: panel: need to delete scan_timer when misc_register fails in panel_attach
2019-08-15Merge tag 'devicetree-fixes-for-5.3-3' of ↵Linus Torvalds5-19/+32
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Fix building DT binding examples for in tree builds - Correct some refcounting in adjust_local_phandle_references() - Update FSL FEC binding with deprecated properties - Schema fix in stm32 pinctrl - Fix typo in of_irq_parse_one docbook comment * tag 'devicetree-fixes-for-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: irq: fix a trivial typo in a doc comment dt-bindings: pinctrl: stm32: Fix 'st,syscfg' schema dt-bindings: fec: explicitly mark deprecated properties of: resolver: Add of_node_put() before return and break dt-bindings: Fix generated example files getting added to schemas
2019-08-15misc: xilinx-sdfec: fix dependency and build errorRandy Dunlap1-0/+1
lib/devres.c, which implements devm_ioremap_resource(), is only built when CONFIG_HAS_IOMEM is set/enabled, so XILINX_SDFEC should depend on HAS_IOMEM. Fixes this build error (as seen on UML builds): ERROR: "devm_ioremap_resource" [drivers/misc/xilinx_sdfec.ko] undefined! Fixes: 76d83e1c3233 ("misc: xilinx-sdfec: add core driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Derek Kiernan <derek.kiernan@xilinx.com> Cc: Dragan Cvetic <dragan.cvetic@xilinx.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/f9004be5-9925-327b-3ec2-6506e46fe565@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15perf trace: Add --switch-on/--switch-off eventsArnaldo Carvalho de Melo2-0/+19
Just like with 'perf script': # perf trace -e sched:*,syscalls:*sleep* sleep 1 0.000 :28345/28345 sched:sched_waking:comm=perf pid=28346 prio=120 target_cpu=005 0.005 :28345/28345 sched:sched_wakeup:perf:28346 [120] success=1 CPU:005 0.383 sleep/28346 sched:sched_process_exec:filename=/usr/bin/sleep pid=28346 old_pid=28346 0.613 sleep/28346 sched:sched_stat_runtime:comm=sleep pid=28346 runtime=607375 [ns] vruntime=23289041218 [ns] 0.689 sleep/28346 syscalls:sys_enter_nanosleep:rqtp: 0x7ffc491789b0 0.693 sleep/28346 sched:sched_stat_runtime:comm=sleep pid=28346 runtime=72021 [ns] vruntime=23289113239 [ns] 0.694 sleep/28346 sched:sched_switch:sleep:28346 [120] S ==> swapper/5:0 [120] 1000.787 :0/0 sched:sched_waking:comm=sleep pid=28346 prio=120 target_cpu=005 1000.824 :0/0 sched:sched_wakeup:sleep:28346 [120] success=1 CPU:005 1000.908 sleep/28346 syscalls:sys_exit_nanosleep:0x0 1001.218 sleep/28346 sched:sched_process_exit:comm=sleep pid=28346 prio=120 # perf trace -e sched:*,syscalls:*sleep* --switch-on=syscalls:sys_enter_nanosleep sleep 1 0.000 sleep/28349 sched:sched_stat_runtime:comm=sleep pid=28349 runtime=603036 [ns] vruntime=23873537697 [ns] 0.001 sleep/28349 sched:sched_switch:sleep:28349 [120] S ==> swapper/4:0 [120] 1000.392 :0/0 sched:sched_waking:comm=sleep pid=28349 prio=120 target_cpu=004 1000.443 :0/0 sched:sched_wakeup:sleep:28349 [120] success=1 CPU:004 1000.540 sleep/28349 syscalls:sys_exit_nanosleep:0x0 1000.852 sleep/28349 sched:sched_process_exit:comm=sleep pid=28349 prio=120 # perf trace -e sched:*,syscalls:*sleep* --switch-on=syscalls:sys_enter_nanosleep --switch-off=syscalls:sys_exit_nanosleep sleep 1 0.000 sleep/28352 sched:sched_stat_runtime:comm=sleep pid=28352 runtime=610543 [ns] vruntime=24811686681 [ns] 0.001 sleep/28352 sched:sched_switch:sleep:28352 [120] S ==> swapper/0:0 [120] 1000.397 :0/0 sched:sched_waking:comm=sleep pid=28352 prio=120 target_cpu=000 1000.440 :0/0 sched:sched_wakeup:sleep:28352 [120] success=1 CPU:000 # # perf trace -e sched:*,syscalls:*sleep* --switch-on=syscalls:sys_enter_nanosleep --switch-off=syscalls:sys_exit_nanosleep --show-on-off sleep 1 0.000 sleep/28367 syscalls:sys_enter_nanosleep:rqtp: 0x7fffd1a25fc0 0.004 sleep/28367 sched:sched_stat_runtime:comm=sleep pid=28367 runtime=628760 [ns] vruntime=22170052672 [ns] 0.005 sleep/28367 sched:sched_switch:sleep:28367 [120] S ==> swapper/2:0 [120] 1000.367 :0/0 sched:sched_waking:comm=sleep pid=28367 prio=120 target_cpu=002 1000.412 :0/0 sched:sched_wakeup:sleep:28367 [120] success=1 CPU:002 1000.512 sleep/28367 syscalls:sys_exit_nanosleep:0x0 # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: William Cohen <wcohen@redhat.com> Link: https://lkml.kernel.org/n/tip-t3ngpt1brcc1fm9gep9gxm4q@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-15perf evswitch: Add hint when not finding specified on/off eventsArnaldo Carvalho de Melo1-1/+3
If the user specifies a on or off switch event and it isn't in the perf.data file, provide a hint about how to see the events in the perf.data evlist: # perf script --switch-on=syscall:sys_enter_nanosleep --switch-off=syscalls:sys_exit_nanosleep ERROR: event_on event not found (syscall:sys_enter_nanosleep) HINT: use 'perf evlist' to see the available event names # # perf evlist sched:sched_kthread_stop sched:sched_kthread_stop_ret sched:sched_waking sched:sched_wakeup sched:sched_wakeup_new sched:sched_switch sched:sched_migrate_task sched:sched_process_free sched:sched_process_exit sched:sched_wait_task sched:sched_process_wait sched:sched_process_fork sched:sched_process_exec sched:sched_stat_wait sched:sched_stat_sleep sched:sched_stat_iowait sched:sched_stat_blocked sched:sched_stat_runtime sched:sched_pi_setprio sched:sched_move_numa sched:sched_stick_numa sched:sched_swap_numa sched:sched_wake_idle_without_ipi syscalls:sys_enter_clock_nanosleep syscalls:sys_exit_clock_nanosleep syscalls:sys_enter_nanosleep syscalls:sys_exit_nanosleep # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events # # perf script --switch-on=syscalls:sys_enter_nanosleep --switch-off=syscalls:sys_exit_nanosleep sleep 20919 [001] 109866.144411: sched:sched_stat_runtime: comm=sleep pid=20919 runtime=521249 [ns] vruntime=202919398131 [ns] sleep 20919 [001] 109866.144412: sched:sched_switch: sleep:20919 [120] S ==> swapper/1:0 [120] swapper 0 [001] 109867.144568: sched:sched_waking: comm=sleep pid=20919 prio=120 target_cpu=001 swapper 0 [001] 109867.144586: sched:sched_wakeup: sleep:20919 [120] success=1 CPU:001 # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: William Cohen <wcohen@redhat.com> Link: https://lkml.kernel.org/n/tip-iijjvdlyad973oskdq8gmi5w@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-15perf evswitch: Move enoent error message printing to separate functionArnaldo Carvalho de Melo1-2/+7
Allows adding hints there, will be done in followup patch. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: William Cohen <wcohen@redhat.com> Link: https://lkml.kernel.org/n/tip-1kvrdi7weuz3hxycwvarcu6v@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-15perf evswitch: Introduce init() method to set the on/off evsels from the ↵Arnaldo Carvalho de Melo3-18/+30
command line Another step in having all the boilerplate in just one place to then use in the other tools. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: William Cohen <wcohen@redhat.com> Link: https://lkml.kernel.org/n/tip-snreb1wmwyjei3eefwotxp1l@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-15perf evswitch: Introduce OPTS_EVSWITCH() for cmd line processingArnaldo Carvalho de Melo2-6/+9
All tools will want those, so provide a convenient way to get them. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: William Cohen <wcohen@redhat.com> Link: https://lkml.kernel.org/n/tip-v16pe3sbf3wjmn152u18f649@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-15perf evswitch: Add the names of on/off eventsArnaldo Carvalho de Melo2-10/+9
So that we can have macros for the OPT_ entries and also for finding those in an evlist, this way other tools will use this very easily. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: William Cohen <wcohen@redhat.com> Link: https://lkml.kernel.org/n/tip-q0og1xoqqi0w38ve5u0a43k2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-15perf evswitch: Move switch logic to use in other toolsArnaldo Carvalho de Melo4-21/+36
Now other tools that want switching can use an evswitch for that, just set it up and add it to the PERF_RECORD_SAMPLE processing function. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: William Cohen <wcohen@redhat.com> Link: https://lkml.kernel.org/n/tip-b1trj1q97qwfv251l66q3noj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-15perf evswitch: Move struct to a separate header to use in other toolsArnaldo Carvalho de Melo2-7/+17
Now that we see that the simple userspace-based "slicing" of events using delimiter events ("markers") works, lets move it to a separate header to make it available to other tools, next step will be having the switch on/off check done at the PERF_RECORD_SAMPLE processing function moved too. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: William Cohen <wcohen@redhat.com> Link: https://lkml.kernel.org/n/tip-z0cyi9ifzlr37cedr9xztc1k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-15perf script: Allow specifying event to switch off processing of other eventsArnaldo Carvalho de Melo2-4/+32
Counterpart of --switch-on: # perf record -e sched:*,syscalls:sys_*_nanosleep sleep 1 [ perf record: Woken up 36 times to write data ] [ perf record: Captured and wrote 0.032 MB perf.data (10 samples) ] # # perf script :20918 20918 [002] 109866.143696: sched:sched_waking: comm=perf pid=20919 prio=120 target_cpu=001 :20918 20918 [002] 109866.143702: sched:sched_wakeup: perf:20919 [120] success=1 CPU:001 sleep 20919 [001] 109866.144081: sched:sched_process_exec: filename=/usr/bin/sleep pid=20919 old_pid=20919 sleep 20919 [001] 109866.144408: syscalls:sys_enter_nanosleep: rqtp: 0x7ffc2384fef0, rmtp: 0x00000000 sleep 20919 [001] 109866.144411: sched:sched_stat_runtime: comm=sleep pid=20919 runtime=521249 [ns] vruntime=202919398131 [n> sleep 20919 [001] 109866.144412: sched:sched_switch: sleep:20919 [120] S ==> swapper/1:0 [120] swapper 0 [001] 109867.144568: sched:sched_waking: comm=sleep pid=20919 prio=120 target_cpu=001 swapper 0 [001] 109867.144586: sched:sched_wakeup: sleep:20919 [120] success=1 CPU:001 sleep 20919 [001] 109867.144614: syscalls:sys_exit_nanosleep: 0x0 sleep 20919 [001] 109867.144753: sched:sched_process_exit: comm=sleep pid=20919 prio=120 # # perf script --switch-off syscalls:sys_exit_nanosleep :20918 20918 [002] 109866.143696: sched:sched_waking: comm=perf pid=20919 prio=120 target_cpu=001 :20918 20918 [002] 109866.143702: sched:sched_wakeup: perf:20919 [120] success=1 CPU:001 sleep 20919 [001] 109866.144081: sched:sched_process_exec: filename=/usr/bin/sleep pid=20919 old_pid=20919 sleep 20919 [001] 109866.144408: syscalls:sys_enter_nanosleep: rqtp: 0x7ffc2384fef0, rmtp: 0x00000000 sleep 20919 [001] 109866.144411: sched:sched_stat_runtime: comm=sleep pid=20919 runtime=521249 [ns] vruntime=202919398131 [n> sleep 20919 [001] 109866.144412: sched:sched_switch: sleep:20919 [120] S ==> swapper/1:0 [120] swapper 0 [001] 109867.144568: sched:sched_waking: comm=sleep pid=20919 prio=120 target_cpu=001 swapper 0 [001] 109867.144586: sched:sched_wakeup: sleep:20919 [120] success=1 CPU:001 sleep 20919 [001] 109867.144753: sched:sched_process_exit: comm=sleep pid=20919 prio=120 # # perf script --switch-on syscalls:sys_enter_nanosleep --switch-off syscalls:sys_exit_nanosleep sleep 20919 [001] 109866.144411: sched:sched_stat_runtime: comm=sleep pid=20919 runtime=521249 [ns] vruntime=202919398131 [n> sleep 20919 [001] 109866.144412: sched:sched_switch: sleep:20919 [120] S ==> swapper/1:0 [120] swapper 0 [001] 109867.144568: sched:sched_waking: comm=sleep pid=20919 prio=120 target_cpu=001 swapper 0 [001] 109867.144586: sched:sched_wakeup: sleep:20919 [120] success=1 CPU:001 # # perf script --switch-on syscalls:sys_enter_nanosleep --switch-off syscalls:sys_exit_nanosleep --show-on-off sleep 20919 [001] 109866.144408: syscalls:sys_enter_nanosleep: rqtp: 0x7ffc2384fef0, rmtp: 0x00000000 sleep 20919 [001] 109866.144411: sched:sched_stat_runtime: comm=sleep pid=20919 runtime=521249 [ns] vruntime=202919398131 [n> sleep 20919 [001] 109866.144412: sched:sched_switch: sleep:20919 [120] S ==> swapper/1:0 [120] swapper 0 [001] 109867.144568: sched:sched_waking: comm=sleep pid=20919 prio=120 target_cpu=001 swapper 0 [001] 109867.144586: sched:sched_wakeup: sleep:20919 [120] success=1 CPU:001 sleep 20919 [001] 109867.144614: syscalls:sys_exit_nanosleep: 0x0 # Now think about using this together with 'perf probe' to create custom on/off events in your app :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: William Cohen <wcohen@redhat.com> Link: https://lkml.kernel.org/n/tip-li3j01c4tmj9kw6ydsl8swej@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-15perf script: Allow showing the --switch-on eventArnaldo Carvalho de Melo2-0/+9
One may want to see the --switch-on event as well, allow for that, using the previous cset example: # perf script --switch-on syscalls:sys_enter_nanosleep --show-on-off sleep 13638 [001] 108237.582286: syscalls:sys_enter_nanosleep: rqtp: 0x7fff1948ac40, rmtp: 0x00000000 sleep 13638 [001] 108237.582289: sched:sched_stat_runtime: comm=sleep pid=13638 runtime=578104 [ns] vruntime=202889459556 [ns] sleep 13638 [001] 108237.582291: sched:sched_switch: sleep:13638 [120] S ==> swapper/1:0 [120] swapper 0 [001] 108238.582428: sched:sched_waking: comm=sleep pid=13638 prio=120 target_cpu=001 swapper 0 [001] 108238.582458: sched:sched_wakeup: sleep:13638 [120] success=1 CPU:001 sleep 13638 [001] 108238.582698: sched:sched_stat_runtime: comm=sleep pid=13638 runtime=173915 [ns] vruntime=202889633471 [ns] sleep 13638 [001] 108238.582782: sched:sched_process_exit: comm=sleep pid=13638 prio=120 # # perf script --switch-on syscalls:sys_enter_nanosleep sleep 13638 [001] 108237.582289: sched:sched_stat_runtime: comm=sleep pid=13638 runtime=578104 [ns] vruntime=202889459556 [ns] sleep 13638 [001] 108237.582291: sched:sched_switch: sleep:13638 [120] S ==> swapper/1:0 [120] swapper 0 [001] 108238.582428: sched:sched_waking: comm=sleep pid=13638 prio=120 target_cpu=001 swapper 0 [001] 108238.582458: sched:sched_wakeup: sleep:13638 [120] success=1 CPU:001 sleep 13638 [001] 108238.582698: sched:sched_stat_runtime: comm=sleep pid=13638 runtime=173915 [ns] vruntime=202889633471 [ns] sleep 13638 [001] 108238.582782: sched:sched_process_exit: comm=sleep pid=13638 prio=120 # Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: William Cohen <wcohen@redhat.com> Cc: Florian Weimer <fweimer@redhat.com> Link: https://lkml.kernel.org/n/tip-0omwwoywj1v63gu8cz0tr0cy@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-15perf script: Allow specifying event to switch on processing of other eventsArnaldo Carvalho de Melo2-0/+29
Sometime we want to only consider events after something happens, so allow discarding events till such events is found, e.g.: Record all scheduler tracepoints and the sys_enter_nanosleep syscall event for the 'sleep 1' workload: # perf record -e sched:*,syscalls:sys_enter_nanosleep sleep 1 [ perf record: Woken up 31 times to write data ] [ perf record: Captured and wrote 0.032 MB perf.data (10 samples) ] # So we have these events in the generated perf data file: # perf evlist sched:sched_kthread_stop sched:sched_kthread_stop_ret sched:sched_waking sched:sched_wakeup sched:sched_wakeup_new sched:sched_switch sched:sched_migrate_task sched:sched_process_free sched:sched_process_exit sched:sched_wait_task sched:sched_process_wait sched:sched_process_fork sched:sched_process_exec sched:sched_stat_wait sched:sched_stat_sleep sched:sched_stat_iowait sched:sched_stat_blocked sched:sched_stat_runtime sched:sched_pi_setprio sched:sched_move_numa sched:sched_stick_numa sched:sched_swap_numa sched:sched_wake_idle_without_ipi syscalls:sys_enter_nanosleep # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events # Then show all of the events that actually took place in this 'perf record' session: # perf script :13637 13637 [002] 108237.581529: sched:sched_waking: comm=perf pid=13638 prio=120 target_cpu=001 :13637 13637 [002] 108237.581537: sched:sched_wakeup: perf:13638 [120] success=1 CPU:001 sleep 13638 [001] 108237.581992: sched:sched_process_exec: filename=/usr/bin/sleep pid=13638 old_pid=13638 sleep 13638 [001] 108237.582286: syscalls:sys_enter_nanosleep: rqtp: 0x7fff1948ac40, rmtp: 0x00000000 sleep 13638 [001] 108237.582289: sched:sched_stat_runtime: comm=sleep pid=13638 runtime=578104 [ns] vruntime=202889459556 [ns] sleep 13638 [001] 108237.582291: sched:sched_switch: sleep:13638 [120] S ==> swapper/1:0 [120] swapper 0 [001] 108238.582428: sched:sched_waking: comm=sleep pid=13638 prio=120 target_cpu=001 swapper 0 [001] 108238.582458: sched:sched_wakeup: sleep:13638 [120] success=1 CPU:001 sleep 13638 [001] 108238.582698: sched:sched_stat_runtime: comm=sleep pid=13638 runtime=173915 [ns] vruntime=202889633471 [ns] sleep 13638 [001] 108238.582782: sched:sched_process_exit: comm=sleep pid=13638 prio=120 # Now lets see only the ones that took place after a certain "marker": # perf script --switch-on syscalls:sys_enter_nanosleep sleep 13638 [001] 108237.582289: sched:sched_stat_runtime: comm=sleep pid=13638 runtime=578104 [ns] vruntime=202889459556 [ns] sleep 13638 [001] 108237.582291: sched:sched_switch: sleep:13638 [120] S ==> swapper/1:0 [120] swapper 0 [001] 108238.582428: sched:sched_waking: comm=sleep pid=13638 prio=120 target_cpu=001 swapper 0 [001] 108238.582458: sched:sched_wakeup: sleep:13638 [120] success=1 CPU:001 sleep 13638 [001] 108238.582698: sched:sched_stat_runtime: comm=sleep pid=13638 runtime=173915 [ns] vruntime=202889633471 [ns] sleep 13638 [001] 108238.582782: sched:sched_process_exit: comm=sleep pid=13638 prio=120 # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: William Cohen <wcohen@redhat.com> Link: https://lkml.kernel.org/n/tip-f1oo0ufdhrkx6nhy2lj1ierm@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-15perf vendor events intel: Add Tremontx event file v1.02Haiyan Song10-0/+902
Add a Intel event file for perf. Signed-off-by: Haiyan Song <haiyanx.song@intel.com> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190815035942.30602-1-haiyanx.song@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-15usb: add a hcd_uses_dma helperChristoph Hellwig5-11/+10
The USB buffer allocation code is the only place in the usb core (and in fact the whole kernel) that uses is_device_dma_capable, while the URB mapping code uses the uses_dma flag in struct usb_bus. Switch the buffer allocation to use the uses_dma flag used by the rest of the USB code, and create a helper in hcd.h that checks this flag as well as the CONFIG_HAS_DMA to simplify the caller a bit. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20190811080520.21712-3-hch@lst.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15usb: don't create dma pools for HCDs with a localmem_poolChristoph Hellwig1-3/+3
If the HCD provides a localmem pool we will never use the DMA pools, so don't create them. Fixes: b0310c2f09bb ("USB: use genalloc for USB HCs with local memory") Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20190811080520.21712-2-hch@lst.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15usb: chipidea: imx: fix EPROBE_DEFER support during driver probeAndré Draszik1-7/+12
If driver probe needs to be deferred, e.g. because ci_hdrc_add_device() isn't ready yet, this driver currently misbehaves badly: a) success is still reported to the driver core (meaning a 2nd probe attempt will never be done), leaving the driver in a dysfunctional state and the hardware unusable b) driver remove / shutdown OOPSes: [ 206.786916] Unable to handle kernel paging request at virtual address fffffdff [ 206.794148] pgd = 880b9f82 [ 206.796890] [fffffdff] *pgd=abf5e861, *pte=00000000, *ppte=00000000 [ 206.803179] Internal error: Oops: 37 [#1] PREEMPT SMP ARM [ 206.808581] Modules linked in: wl18xx evbug [ 206.813308] CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 4.19.35+gf345c93b4195 #1 [ 206.821053] Hardware name: Freescale i.MX7 Dual (Device Tree) [ 206.826813] PC is at ci_hdrc_remove_device+0x4/0x20 [ 206.831699] LR is at ci_hdrc_imx_remove+0x20/0xe8 [ 206.836407] pc : [<805cd4b0>] lr : [<805d62cc>] psr: 20000013 [ 206.842678] sp : a806be40 ip : 00000001 fp : 80adbd3c [ 206.847906] r10: 80b1b794 r9 : 80d5dfe0 r8 : a8192c44 [ 206.853136] r7 : 80db93a0 r6 : a8192c10 r5 : a8192c00 r4 : a93a4a00 [ 206.859668] r3 : 00000000 r2 : a8192ce4 r1 : ffffffff r0 : fffffdfb [ 206.866201] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 206.873341] Control: 10c5387d Table: a9e0c06a DAC: 00000051 [ 206.879092] Process systemd-shutdow (pid: 1, stack limit = 0xb271353c) [ 206.885624] Stack: (0xa806be40 to 0xa806c000) [ 206.889992] be40: a93a4a00 805d62cc a8192c1c a8170e10 a8192c10 8049a490 80d04d08 00000000 [ 206.898179] be60: 00000000 80d0da2c fee1dead 00000000 a806a000 00000058 00000000 80148b08 [ 206.906366] be80: 01234567 80148d8c a9858600 00000000 00000000 00000000 00000000 80d04d08 [ 206.914553] bea0: 00000000 00000000 a82741e0 a9858600 00000024 00000002 a9858608 00000005 [ 206.922740] bec0: 0000001e 8022c058 00000000 00000000 a806bf14 a9858600 00000000 a806befc [ 206.930927] bee0: a806bf78 00000000 7ee12c30 8022c18c a806bef8 a806befc 00000000 00000001 [ 206.939115] bf00: 00000000 00000024 a806bf14 00000005 7ee13b34 7ee12c68 00000004 7ee13f20 [ 206.947302] bf20: 00000010 7ee12c7c 00000005 7ee12d04 0000000a 76e7dc00 00000001 80d0f140 [ 206.955490] bf40: ab637880 a974de40 60000013 80d0f140 ab6378a0 80d04d08 a8080470 a9858600 [ 206.963677] bf60: a9858600 00000000 00000000 8022c24c 00000000 80144310 00000000 00000000 [ 206.971864] bf80: 80101204 80d04d08 00000000 80d04d08 00000000 00000000 00000003 00000058 [ 206.980051] bfa0: 80101204 80101000 00000000 00000000 fee1dead 28121969 01234567 00000000 [ 206.988237] bfc0: 00000000 00000000 00000003 00000058 00000000 00000000 00000000 00000000 [ 206.996425] bfe0: 0049ffb0 7ee13d58 0048a84b 76f245a6 60000030 fee1dead 00000000 00000000 [ 207.004622] [<805cd4b0>] (ci_hdrc_remove_device) from [<805d62cc>] (ci_hdrc_imx_remove+0x20/0xe8) [ 207.013509] [<805d62cc>] (ci_hdrc_imx_remove) from [<8049a490>] (device_shutdown+0x16c/0x218) [ 207.022050] [<8049a490>] (device_shutdown) from [<80148b08>] (kernel_restart+0xc/0x50) [ 207.029980] [<80148b08>] (kernel_restart) from [<80148d8c>] (sys_reboot+0xf4/0x1f0) [ 207.037648] [<80148d8c>] (sys_reboot) from [<80101000>] (ret_fast_syscall+0x0/0x54) [ 207.045308] Exception stack(0xa806bfa8 to 0xa806bff0) [ 207.050368] bfa0: 00000000 00000000 fee1dead 28121969 01234567 00000000 [ 207.058554] bfc0: 00000000 00000000 00000003 00000058 00000000 00000000 00000000 00000000 [ 207.066737] bfe0: 0049ffb0 7ee13d58 0048a84b 76f245a6 [ 207.071799] Code: ebffffa8 e3a00000 e8bd8010 e92d4010 (e5904004) [ 207.078021] ---[ end trace be47424e3fd46e9f ]--- [ 207.082647] Kernel panic - not syncing: Fatal exception [ 207.087894] ---[ end Kernel panic - not syncing: Fatal exception ]--- c) the error path in combination with driver removal causes imbalanced calls to the clk_*() and pm_()* APIs a) happens because the original intended return value is overwritten (with 0) by the return code of regulator_disable() in ci_hdrc_imx_probe()'s error path b) happens because ci_pdev is -EPROBE_DEFER, which causes ci_hdrc_remove_device() to OOPS Fix a) by being more careful in ci_hdrc_imx_probe()'s error path and not overwriting the real error code Fix b) by calling the respective cleanup functions during remove only when needed (when ci_pdev != NULL, i.e. when everything was initialised correctly). This also has the side effect of not causing imbalanced clk_*() and pm_*() API calls as part of the error code path. Fixes: 7c8e8909417e ("usb: chipidea: imx: add HSIC support") Signed-off-by: André Draszik <git@andred.net> Cc: stable <stable@vger.kernel.org> CC: Peter Chen <Peter.Chen@nxp.com> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Shawn Guo <shawnguo@kernel.org> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Pengutronix Kernel Team <kernel@pengutronix.de> CC: Fabio Estevam <festevam@gmail.com> CC: NXP Linux Team <linux-imx@nxp.com> CC: linux-usb@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20190810150758.17694-1-git@andred.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15usb: host: fotg2: restart hcd after port resetHans Ulli Kroll1-0/+4
On the Gemini SoC the FOTG2 stalls after port reset so restart the HCD after each port reset. Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20190810150458.817-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15USB: CDC: fix sanity checks in CDC union parserOliver Neukum1-2/+2
A few checks checked for the size of the pointer to a structure instead of the structure itself. Copy & paste issue presumably. Fixes: e4c6fb7794982 ("usbnet: move the CDC parser into USB core") Cc: stable <stable@vger.kernel.org> Reported-by: syzbot+45a53506b65321c1fe91@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20190813093541.18889-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15usb: cdc-acm: make sure a refcount is taken early enoughOliver Neukum1-5/+7
destroy() will decrement the refcount on the interface, so that it needs to be taken so early that it never undercounts. Fixes: 7fb57a019f94e ("USB: cdc-acm: Fix potential deadlock (lockdep warning)") Cc: stable <stable@vger.kernel.org> Reported-and-tested-by: syzbot+1b2449b7b5dc240d107a@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20190808142119.7998-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15Merge tag 'amlogic-fixes' of ↵Arnd Bergmann3-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes arm64: dts: Amlogic fixes for v5.3-rc - a few small DT fixes for g12a/g12b platforms * tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: amlogic: odroid-n2: keep SD card regulator always on arm64: dts: meson-g12a-sei510: enable IR controller arm64: dts: meson-g12a: add missing dwc2 phy-names
2019-08-15Merge tag 'omap-for-v5.3/fixes-rc4' of ↵Arnd Bergmann19-103/+133
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omap variants for v5.3-rc cycle We have another fix to disable voltage switching for am57xx SDIO as the bootrom cannot handle all the voltages after a reset that thought I had already sent a pull request for earlier but forgot. And we also update dra74x iodelay configuration for mmc3 to use the recommended values. Then I noticed we had introduced few new boot warnings with the various recent ti-sysc changes and wanted to fix those. I also noticed we still have too many warnings to be able to spot the real ones easily and fixed up few of those. Sure some of the warnings have been around for a long time and few of the fixes could have waited for the merge window, but having more usable dmesg log level output is a valuable. Other fixes are IO size correction for am335x UARTs that cause issues for at least FreeBSD using the same device tree file that checks that the child IO range is not larger than the parent has. For omap1 ams-delta keyboard we need to fix a irq ack that broke with all the recent gpio changes. And there are also few static checker warning fixes for recent am335x PM changes and ti-sysc driver and one switch fall-though update. * tag 'omap-for-v5.3/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: soc: ti: pm33xx: Make two symbols static soc: ti: pm33xx: Fix static checker warnings ARM: OMAP: dma: Mark expected switch fall-throughs ARM: dts: Fix incomplete dts data for am3 and am4 mmc bus: ti-sysc: Simplify cleanup upon failures in sysc_probe() ARM: OMAP1: ams-delta-fiq: Fix missing irq_ack ARM: dts: dra74x: Fix iodelay configuration for mmc3 ARM: dts: am335x: Fix UARTs length ARM: OMAP2+: Fix omap4 errata warning on other SoCs ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7 ARM: dts: Fix flags for gpio7 bus: ti-sysc: Fix using configured sysc mask value bus: ti-sysc: Fix handling of forced idle ARM: OMAP2+: Fix missing SYSC_HAS_RESET_STATUS for dra7 epwmss ARM: dts: am57xx: Disable voltage switching for SD card Link: https://lore.kernel.org/r/pull-1565844391-332885@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-15USB: serial: option: add the BroadMobi BM818 cardBob Ham1-0/+2
Add a VID:PID for the BroadMobi BM818 M.2 card T: Bus=01 Lev=03 Prnt=40 Port=03 Cnt=01 Dev#= 44 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2060 Rev=00.00 S: Manufacturer=Qualcomm, Incorporated S: Product=Qualcomm CDMA Technologies MSM C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by: Bob Ham <bob.ham@puri.sm> Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca> Cc: stable <stable@vger.kernel.org> [ johan: use USB_DEVICE_INTERFACE_CLASS() ] Signed-off-by: Johan Hovold <johan@kernel.org>
2019-08-15USB: serial: option: Add Motorola modem UARTsTony Lindgren1-0/+5
On Motorola Mapphone devices such as Droid 4 there are five USB ports that do not use the same layout as Gobi 1K/2K/etc devices listed in qcserial.c. So we should use qcaux.c or option.c as noted by Dan Williams <dan.j.williams@intel.com>. As the Motorola USB serial ports have an interrupt endpoint as shown with lsusb -v, we should use option.c instead of qcaux.c as pointed out by Johan Hovold <johan@kernel.org>. The ff/ff/ff interfaces seem to always be UARTs on Motorola devices. For the other interfaces, class 0x0a (CDC Data) should not in general be added as they are typically part of a multi-interface function as noted earlier by Bjørn Mork <bjorn@mork.no>. However, looking at the Motorola mapphone kernel code, the mdm6600 0x0a class is only used for flashing the modem firmware, and there are no other interfaces. So I've added that too with more details below as it works just fine. The ttyUSB ports on Droid 4 are: ttyUSB0 DIAG, CQDM-capable ttyUSB1 MUX or NMEA, no response ttyUSB2 MUX or NMEA, no response ttyUSB3 TCMD ttyUSB4 AT-capable The ttyUSB0 is detected as QCDM capable by ModemManager. I think it's only used for debugging with ModemManager --debug for sending custom AT commands though. ModemManager already can manage data connection using the USB QMI ports that are already handled by the qmi_wwan.c driver. To enable the MUX or NMEA ports, it seems that something needs to be done additionally to enable them, maybe via the DIAG or TCMD port. It might be just a NVRAM setting somewhere, but I have no idea what NVRAM settings may need changing for that. The TCMD port seems to be a Motorola custom protocol for testing the modem and to configure it's NVRAM and seems to work just fine based on a quick test with a minimal tcmdrw tool I wrote. The voice modem AT-capable port seems to provide only partial support, and no PM support compared to the TS 27.010 based UART wired directly to the modem. The UARTs added with this change are the same product IDs as the Motorola Mapphone Android Linux kernel mdm6600_id_table. I don't have any mdm9600 based devices, so I have only tested these on mdm6600 based droid 4. Then for the class 0x0a (CDC Data) mode, the Motorola Mapphone Android Linux kernel driver moto_flashqsc.c just seems to change the port->bulk_out_size to 8K from the default. And is only used for flashing the modem firmware it seems. I've verified that flashing the modem with signed firmware works just fine with the option driver after manually toggling the GPIO pins, so I've added droid 4 modem flashing mode to the option driver. I've not added the other devices listed in moto_flashqsc.c in case they really need different port->bulk_out_size. Those can be added as they get tested to work for flashing the modem. After this patch the output of /sys/kernel/debug/usb/devices has the following for normal 22b8:2a70 mode including the related qmi_wwan interfaces: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22b8 ProdID=2a70 Rev= 0.00 S: Manufacturer=Motorola, Incorporated S: Product=Flash MZ600 C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=88(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan E: Ad=8b(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=8c(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan E: Ad=8d(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms In 22b8:900e "qc_dload" mode the device shows up as: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22b8 ProdID=900e Rev= 0.00 S: Manufacturer=Motorola, Incorporated S: Product=Flash MZ600 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms And in 22b8:4281 "ram_downloader" mode the device shows up as: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22b8 ProdID=4281 Rev= 0.00 S: Manufacturer=Motorola, Incorporated S: Product=Flash MZ600 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=fc Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms Cc: Bjørn Mork <bjorn@mork.no> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Lars Melin <larsm17@gmail.com> Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2019-08-15Merge tag 'perf-core-for-mingo-5.4-20190814' of ↵Thomas Gleixner830-4436/+10778
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo: Intel PT: Adrian Hunter: - Add PEBS via Intel PT support, the kernel bits went via PeterZ. perf record: Alexander Shishkin: - Add an option to take an AUX snapshot on exit. Tan Xiaojun: - Support aarch64 random socket_id assignment, just like was fixed for S/390. tools: Andy Shevchenko: - Keep list of tools in alphabetical order on 'make -C tools help'. perf session: Arnaldo Carvalho de Melo: - Avoid infinite loop when seeing invalid header.size, reported by Vince Weaver using a perf.data fuzzer. Documentation: Vince Weaver: - Clarify HEADER_SAMPLE_TOPOLOGY format in the perf.data spec. perf config: Arnaldo Carvalho de Melo: - Honour $PERF_CONFIG env var to specify alternate .perfconfig. perf test: Arnaldo Carvalho de Melo: - Disable ~/.perfconfig to get default output in 'perf trace' tests. perf top: Arnaldo Carvalho de Melo: - Set display thread COMM to help with debugging. - Collapse and resort evsels in a group, so that we have output similar to 'perf report' when using event groups, i.e. perf top -e '{cycles,instructions}' Will have two columns, and the instructions one will work. core: Igor Lubashev: - Detect if libcap development files are available so that we can use capabilities to match the checks made by the kernel instead of using plain (geteuid() == 0). Intel: Haiyan Song: - Add Icelake V1.00 event file. perf trace: Leo Yan: - Fix segmentation fault when access syscall info on arm64. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-15MAINTAINERS, x86/CPU: Tony Luck will maintain asm/intel-family.hTony Luck1-0/+7
There are a few different subsystems in the kernel that depend on model specific behaviour (perf, EDAC, power, ...). Easier for just one person to have the task to get new model numbers included instead of having these groups trip over each other to do it. [ bp: s/Cpu/CPU/ and add x86@kernel.org so that it gets CCed too as FYI. ] Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190814234030.30817-1-tony.luck@intel.com
2019-08-15selftests: kvm: fix vmx_set_nested_state_testPaolo Bonzini1-3/+14
vmx_set_nested_state_test is trying to use the KVM_STATE_NESTED_EVMCS without enabling enlightened VMCS first. Correct the outcome of the test, and actually test that it succeeds after the capability is enabled. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-15selftests: kvm: provide common function to enable eVMCSPaolo Bonzini4-21/+28
There are two tests already enabling eVMCS and a third is coming. Add a function that enables the capability and tests the result. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-15selftests: kvm: do not try running the VM in vmx_set_nested_state_testPaolo Bonzini1-15/+0
This test is only covering various edge cases of the KVM_SET_NESTED_STATE ioctl. Running the VM does not really add anything. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-15Merge tag 'drm-fixes-5.3-2019-08-14' of ↵Dave Airlie3-8/+9
git://people.freedesktop.org/~agd5f/linux into drm-fixes drm-fixes-5.3-2019-08-14: amdgpu: - Use kvalloc for dc_state to avoid allocation failures in some cases. - Fix gfx9 soft recovery scheduler: - Fix a race condition when destroying entities Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190815024919.3434-1-alexander.deucher@amd.com
2019-08-15drm/nouveau: Only recalculate PBN/VCPI on mode/connector changesLyude Paul1-9/+13
I -thought- I had fixed this entirely, but it looks like that I didn't test this thoroughly enough as we apparently still make one big mistake with nv50_msto_atomic_check() - we don't handle the following scenario: * CRTC #1 has n VCPI allocated to it, is attached to connector DP-4 which is attached to encoder #1. enabled=y active=n * CRTC #1 is changed from DP-4 to DP-5, causing: * DP-4 crtc=#1→NULL (VCPI n→0) * DP-5 crtc=NULL→#1 * CRTC #1 steals encoder #1 back from DP-4 and gives it to DP-5 * CRTC #1 maintains the same mode as before, just with a different connector * mode_changed=n connectors_changed=y (we _SHOULD_ do VCPI 0→n here, but don't) Once the above scenario is repeated once, we'll attempt freeing VCPI from the connector that we didn't allocate due to the connectors changing, but the mode staying the same. Sigh. Since nv50_msto_atomic_check() has broken a few times now, let's rethink things a bit to be more careful: limit both VCPI/PBN allocations to mode_changed || connectors_changed, since neither VCPI or PBN should ever need to change outside of routing and mode changes. Changes since v1: * Fix accidental reversal of clock and bpp arguments in drm_dp_calc_pbn_mode() - William Lewis Signed-off-by: Lyude Paul <lyude@redhat.com> Reported-by: Bohdan Milar <bmilar@redhat.com> Tested-by: Bohdan Milar <bmilar@redhat.com> Fixes: 232c9eec417a ("drm/nouveau: Use atomic VCPI helpers for MST") References: 412e85b60531 ("drm/nouveau: Only release VCPI slots on mode changes") Cc: Lyude Paul <lyude@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@redhat.com> Cc: Jerry Zuo <Jerry.Zuo@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Juston Li <juston.li@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Karol Herbst <karolherbst@gmail.com> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: <stable@vger.kernel.org> # v5.1+ Acked-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190809005307.18391-1-lyude@redhat.com
2019-08-15drm/ast: Fixed reboot test may cause system hangedY.C. Chen3-3/+6
There is another thread still access standard VGA I/O while loading drm driver. Disable standard VGA I/O decode to avoid this issue. Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1523410059-18415-1-git-send-email-yc_chen@aspeedtech.com
2019-08-15cxgb4: fix a memory leak bugWenwen Wang1-1/+3
In blocked_fl_write(), 't' is not deallocated if bitmap_parse_user() fails, leading to a memory leak bug. To fix this issue, free t before returning the error. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15of: irq: fix a trivial typo in a doc commentLubomir Rintel1-1/+1
Diverged from what the code does with commit 530210c7814e ("of/irq: Replace of_irq with of_phandle_args"). Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Rob Herring <robh@kernel.org>
2019-08-15dt-bindings: pinctrl: stm32: Fix 'st,syscfg' schemaRob Herring1-1/+2
The proper way to add additional contraints to an existing json-schema is using 'allOf' to reference the base schema. Using just '$ref' doesn't work. Fix this for the 'st,syscfg' property. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
2019-08-15scsi: ufs: Fix NULL pointer dereference in ufshcd_config_vreg_hpm()Adrian Hunter1-0/+3
Fix the following BUG: [ 187.065689] BUG: kernel NULL pointer dereference, address: 000000000000001c [ 187.065790] RIP: 0010:ufshcd_vreg_set_hpm+0x3c/0x110 [ufshcd_core] [ 187.065938] Call Trace: [ 187.065959] ufshcd_resume+0x72/0x290 [ufshcd_core] [ 187.065980] ufshcd_system_resume+0x54/0x140 [ufshcd_core] [ 187.065993] ? pci_pm_restore+0xb0/0xb0 [ 187.066005] ufshcd_pci_resume+0x15/0x20 [ufshcd_pci] [ 187.066017] pci_pm_thaw+0x4c/0x90 [ 187.066030] dpm_run_callback+0x5b/0x150 [ 187.066043] device_resume+0x11b/0x220 Voltage regulators are optional, so functions must check they exist before dereferencing. Note this issue is hidden if CONFIG_REGULATORS is not set, because the offending code is optimised away. Notes for stable: The issue first appears in commit 57d104c153d3 ("ufs: add UFS power management support") but is inadvertently fixed in commit 60f0187031c0 ("scsi: ufs: disable vccq if it's not needed by UFS device") which in turn was reverted by commit 730679817d83 ("Revert "scsi: ufs: disable vccq if it's not needed by UFS device""). So fix applies v3.18 to v4.5 and v5.1+ Fixes: 57d104c153d3 ("ufs: add UFS power management support") Fixes: 730679817d83 ("Revert "scsi: ufs: disable vccq if it's not needed by UFS device"") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-15scsi: target: tcmu: avoid use-after-free after command timeoutDmitry Fomichev1-2/+7
In tcmu_handle_completion() function, the variable called read_len is always initialized with a value taken from se_cmd structure. If this function is called to complete an expired (timed out) out command, the session command pointed by se_cmd is likely to be already deallocated by the target core at that moment. As the result, this access triggers a use-after-free warning from KASAN. This patch fixes the code not to touch se_cmd when completing timed out TCMU commands. It also resets the pointer to se_cmd at the time when the TCMU_CMD_BIT_EXPIRED flag is set because it is going to become invalid after calling target_complete_cmd() later in the same function, tcmu_check_expired_cmd(). Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Acked-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-15scsi: qla2xxx: Fix gnl.l memory leak on adapter init failureBill Kuzeja2-1/+12
If HBA initialization fails unexpectedly (exiting via probe_failed:), we may fail to free vha->gnl.l. So that we don't attempt to double free, set this pointer to NULL after a free and check for NULL at probe_failed: so we know whether or not to call dma_free_coherent. Signed-off-by: Bill Kuzeja <william.kuzeja@stratus.com> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-15drm/mediatek: set DMA max segment sizeAlexandre Courbot2-2/+35
This driver requires imported PRIME buffers to appear contiguously in its IO address space. Make sure this is the case by setting the maximum DMA segment size to a more suitable value than the default 64KB. Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2019-08-15drm/mediatek: use correct device to import PRIME buffersAlexandre Courbot1-1/+13
PRIME buffers should be imported using the DMA device. To this end, use a custom import function that mimics drm_gem_prime_import_dev(), but passes the correct device. Fixes: 119f5173628aa ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: CK Hu <ck.hu@mediatek.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-04 01:53:41 +0300