summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-12-17ARM: dts: cm-t335: add support for USB0Ilya Ledvich1-0/+20
Enable USB0. Signed-off-by: Ilya Ledvich <ilya@compulab.co.il> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17ARM: dts: omap: replace legacy *,wakeup property with wakeup-sourceSudeep Holla22-57/+57
Though the keyboard and other driver will continue to support the legacy "gpio-key,wakeup", "linux,wakeup" boolean property to enable the wakeup source, "wakeup-source" is the new standard binding. This patch replaces all the legacy wakeup properties with the unified "wakeup-source" property in order to avoid any futher copy-paste duplication. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17ARM: dts: am335x: replace gpio-key,wakeup with wakeup-source propertySudeep Holla3-6/+6
Though the keyboard driver for GPIO buttons(gpio-keys) will continue to check for/support the legacy "gpio-key,wakeup" boolean property to enable gpio buttons as wakeup source, "wakeup-source" is the new standard binding. This patch replaces the legacy "gpio-key,wakeup" with the unified "wakeup-source" property in order to avoid any futher copy-paste duplication. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17ARM: DTS: am437x: Use the new DT bindings for the eDMA3Peter Ujfalusi2-27/+62
Switch to use the ti,edma3-tpcc and ti,edma3-tptc binding for the eDMA3 and enable the DMA even crossbar with ti,am335x-edma-crossbar. With the new bindings boards can customize and tweak the DMA channel priority to match their needs. With the new binding the memcpy is safe to be used since with the old binding it was not possible for a driver to know which channel is allowed to be used as non HW triggered channel. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17ARM: DTS: am33xx: Use the new DT bindings for the eDMA3Peter Ujfalusi3-43/+71
Switch to use the ti,edma3-tpcc and ti,edma3-tptc binding for the eDMA3 and enable the DMA even crossbar with ti,am335x-edma-crossbar. With the new bindings boards can customize and tweak the DMA channel priority to match their needs. With the new binding the memcpy is safe to be used since with the old binding it was not possible for a driver to know which channel is allowed to be used as non HW triggered channel. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17Merge commit 'ae0add740cd06169cd124f9aaa6eceb11e5b3060' into omap-for-v4.5/dtTony Lindgren3-25/+40
2015-12-17ARM: shmobile: r8a779x: use SoC-specific usb-dmac compatibility stringsSimon Horman2-4/+4
Use recently SoC-specific compatibility strings in r8a779[01] device trees. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-16arm: dts: Add support for PMA8084 on APQ8084Andy Gross1-0/+52
This patch adds support for the PMA8084 regulators found on APQ8084 platforms. Signed-off-by: Andy Gross <agross@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
2015-12-16arm: dts: Add RPM/SMD support on APQ8084Andy Gross1-0/+20
This patch adds support for RPM and SMD nodes that are present on APQ8084 platforms. Signed-off-by: Andy Gross <agross@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
2015-12-16arm: dts: Add APQ8084 SMEM nodesAndy Gross1-0/+36
This patch adds all the required nodes to support SMEM on APQ8084 Signed-off-by: Andy Gross <agross@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
2015-12-16ARM: dts: qcom: apq8064-ifc6410 Use hardware flow control for GSBI6Ivan T. Ivanov1-1/+1
GSBI6 UART module is connected to BT chip, which uses hardware flow control lines. Enable them on SoC side. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2015-12-16arm: dts: qcom: apq8064: Add fixed rate on-board oscillatorsGeorgi Djakov1-0/+20
Currently the rates of the xo and sleep clocks are hard-coded in the GCC driver, but this is a board layout description that actually should be in the DT. Moving them into DT also allows us to insert the RPM controlled clocks between the DT and GCC clocks. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-12-16Merge tag 'socfpga_dts_for_v4.5' of ↵Arnd Bergmann3-0/+128
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt Merge "SoCFPGA DTS update for v4.5" from Dinh Nguyen: - Add DT board file for Denx MCVEVK board * tag 'socfpga_dts_for_v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: Add support for DENX MCV SoM and MCVEVK baseboard
2015-12-16Merge tag 'realview-base-armsoc-2-tag' of ↵Arnd Bergmann4-1/+713
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt Merge "Realview DT files" from Linus Walleij: The device tree changes for the continued RealView DT support. * tag 'realview-base-armsoc-2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: realview: add device tree for PB11MPCore clk: add ARM syscon ICST device tree bindings ARM: add DT bindings for the ARM11MPCore CPU cluster
2015-12-15Merge tag 'arm-soc/for-4.5/devicetree' of ↵Arnd Bergmann17-53/+762
http://github.com/Broadcom/stblinux into next/dt Pull "Broadcom devicetree changes for v4.5¨ from Florian Fainelli: This pull request contains the Broadcom ARM-based Device Tree changes for 4.5: - Jon Mason enables the following for Broadcom Northstar Plus SoCs: PCI (using iProc PCI), NAND flash controller (BRCMNAND), TWD Timer and Watchdog (Cortex-A9), I2C (iProc), clock providers, does some Device Tree cleanups (re-parenting, fixing register sizes and hierarchy) - Jon Mason also adds support for some reference Broadcom Northstar reference designs like the BCM5301X SVK reference boards, updates the existing binding documentation to cover the Northstar chips: 4708, 4709 and 53012. - Pramod Kumar adds the GPIO to pinctrl mapping for the Broadcom Northstar Plus SoCs - Yendapally Reddy Dhananjaya Reddy adds pinctrl Device Tree nodes for the Broadcom Northstar Plus SoCs device tree nodes - Ray Jui adds Cygnus PCIe PHY Device Tree nodes and enables MSI for the iProc PCI controller on Cygnus platforms - Kapil Hali adds SMP binding documentation and Device Tree nodes for the Northstar Plus SoCs - Florian Fainelli adds clock provider support for the Broadcom BCM63138 DSL SoCs by utilizing the existing iProc ARM PLL controller, this includes a stable topic branch from Stephen Boyd to be merged - Rafal Milecki adds missing LEDs for the Netgear R8000 router * tag 'arm-soc/for-4.5/devicetree' of http://github.com/Broadcom/stblinux: ARM: dts: Enable MSI support for Broadcom Cygnus ARM: dts: Add SMP support for Broadcom NSP dt-bindings: add SMP enable-method for Broadcom NSP ARM: dts: enable pinctrl for Broadcom NSP ARM: dts: enable PCIe PHY support for Cygnus ARM: dts: Cygnus: define ngpios property in gpio controller's node ARM: BCM5301X: Add missing Netgear R8000 LEDs ARM: dts: BCM63xx: Add ARMPLL device tree nodes clk: bcm: Add BCM63138 clock support clk: iproc: Extend binding to cover BCM63138 ARM: dts: enable clock support for Broadcom NSP ARM: dts: enable clock support for BCM5301X ARM: dts: NSP: Add I2C support to the DT ARM: dts: NSP: Device Tree clean-ups dts: pinctrl: Add GPIO to Pinctrl pin mapping in DT ARM: dts: bcm5301x: Add BCM SVK DT files dt-bindings: Add new SoCs to bcm4708 DT bindings ARM: dts: NSP: Add TWD Support to DT ARM: dts: NSP: Add NAND Support to DT ARM: dts: NSP: Add PCI support
2015-12-15ARM: dts: armada: replace isil, irq2-can-wakeup-machine with wakeup-source ↵Sudeep Holla3-3/+3
property Though the driver will continue to check for and support the legacy "isil,irq2-can-wakeup-machine" boolean property to wakeup source, "wakeup-source" is the new standard binding. This patch replaces the legacy "isil,irq2-can-wakeup-machine" with the unified "wakeup-source" property in order to avoid any futher copy-paste duplication. Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-15ARM: dts: enable GPU for SolidRun's CuboxRussell King1-0/+8
Enable the GPU for SolidRun's Cubox. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-15ARM: dts: dove: add DT GPU supportRussell King1-0/+16
Add DT support for the Vivante GC600 GPU on Marvell Dove platforms. These nodes default to being disabled unless a platform decides they should be enabled. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-15ARM: mvebu: kirkwood: add PogoPlug series 4 device treeLinus Walleij2-0/+179
This adds a device tree for the CloudEngines PogoPlug series 4 NAS device. Inspired by out-of-tree boardfiles from ArchLinux by Kevin Mihelich. Cc: Moonman <moonman.ca@gmail.com> Cc: Kevin Mihelich <kevin@archlinuxarm.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-15ARM: mvebu: add kirkwood compatibles for cloudengine boardsLinus Walleij1-0/+2
This adds the compatible strings for Cloudengine PogoPlug E02 and series 4. The former already has a devicetree in the kernel. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-15ARM: dts: kirkwood: Add DTS for Zyxel NSA325Hans Ulli Kroll2-0/+239
Add a new DTS file to support the Zyxel NSA325(v2) dual bay NAS device, based on the NSA320 DTS files. The only difference to the NSA320 device is GPIO47. This en/disables the power for the hdd in slot2, currently fixed to on. [gregory.clement@free-electrons.com: fix comment format] Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-12-15ARM: at91/dt: sama5d2 Xplained: pmic needs a specific sda hold timeLudovic Desroches1-0/+1
Data have to be held longer for the PMIC device. The ACT8945A datasheet claims that minimum SDA data hold time is about 300 ns. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-12-15ARM: at91/dt: sama5d4: update i2c compatible stringLudovic Desroches1-3/+3
A new compatible string has been introduced: atmel,sama5d4-i2c. It allows to use the i2c-sda-hold-time-ns property if needed. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-12-15ARM: at91/dt: sama5d4 master clock can run at 200MHz nowNicolas Ferre1-1/+1
After the change of frequency a SAMA5D4 can reach, we have to modify the maximum clock specification for the master clock, up to 200MHz now. It avoids the wrong message saying that "master clk is overclocked" for this configuration. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-12-15ARM: at91/dt: sama5d2: add watchdog nodeWenyou Yang2-0/+11
Add watchdog node to support SAMA5D4 watchdog. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-12-15ARM: at91/dt: sama5d4: Add support for DENX MA5D4 SoM and EVKMarek Vasut3-0/+298
Add support for the DENX MA5D4 SoM and MA5D4EVK board. The system consists of a SoM with eMMC, SPI NOR for booting, 2x SPI CAN chip and an EVK with microSD slot, 2x UART, 2x CAN port, 3x USB port, LEDs and expansion headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-12-15ARM: at91/dt: sama5d4: Add pinmux for 8-bit MMC0 busMarek Vasut1-0/+8
Add pinmux for the 4 remaining signals used in 8-bit MMC 0 bus configuration. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Reviewed-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-12-15ARM: at91/dt: sama5d4: Fix mmc0 pinmux commentsMarek Vasut1-5/+5
Synchronise the comments in mmc0 pinmux node with HSMCI0 pinmux description in the Atmel SAMA5D4 datasheet from 24-Aug-15 page 1119, section 37.6.1, Table 37-3 . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Reviewed-by: Josh Wu <josh.wu@atmel.com> Reported-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-12-15ARM: shmobile: r8a7794: IPMMU compat string SoC part number updateMagnus Damm1-6/+6
Update IPMMU compat strings to include SoC part number. By specifying SoC part number in DT it becomes possible to implement SoC specific features in the IPMMU driver. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-15ARM: shmobile: r8a7793: IPMMU compat string SoC part number updateMagnus Damm1-7/+7
Update IPMMU compat strings to include SoC part number. By specifying SoC part number in DT it becomes possible to implement SoC specific features in the IPMMU driver. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-15ARM: shmobile: r8a7791: IPMMU compat string SoC part number updateMagnus Damm1-7/+7
Update IPMMU compat strings to include SoC part number. By specifying SoC part number in DT it becomes possible to implement SoC specific features in the IPMMU driver. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-15ARM: shmobile: r8a7790: IPMMU compat string SoC part number updateMagnus Damm1-6/+6
Update IPMMU compat strings to include SoC part number. By specifying SoC part number in DT it becomes possible to implement SoC specific features in the IPMMU driver. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-15ARM: dts: imx6: Fix Ethernet PHY mode on Ventana boardsKrzysztof Hałasa5-5/+5
Gateworks Ventana boards seem to need "RGMII-ID" (internal delay) PHY mode, instead of simple "RGMII", for their Marvell 88E1510 transceiver. Otherwise, the Ethernet MAC doesn't work with Marvell PHY driver (TX doesn't seem to work correctly). Tested on GW5400 rev. C. This bug affects ARM Fedora 23. Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> Acked-by: Tim Harvey <tharvey@gateworks.com> Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-15ARM: dts: imx: Fix the assigned-clock mismatch issue on imx6q/dlBai Ping1-3/+3
The 'assigned-clock-parents' and 'assigned-clock-rates' list should corresponding to the 'assigned-clocks' property clock list. Signed-off-by: Bai Ping <b51503@freescale.com> Fixes: ed339363de1b ("ARM: dts: imx6qdl-sabreauto: Allow HDMI and LVDS to work simultaneously") Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-12-15ARM: realview: add device tree for PB11MPCoreLinus Walleij2-1/+670
This adds a device tree for the ARM RealView ARM11MPCore reference design. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-15clk: add ARM syscon ICST device tree bindingsLinus Walleij1-0/+40
This adds the device tree bindings for the ARM Syscon ICST oscillators, which is a register-level interface to the Integrated Device Technology (IDT) ICS525 and ICS307 serially programmable oscillators. Cc: devicetree@vger.kernel.org Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Acked-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-15ARM: add DT bindings for the ARM11MPCore CPU clusterLinus Walleij1-0/+3
The ARM11MPCore has a Snoop Control Unit, but references to it were missing from the DT specification. Define a compatible string for this unit. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-15ARM: shmobile: r8a7794: dtsi: add internal delay for i2c IPsWolfram Sang1-0/+6
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-15ARM: shmobile: r8a7791: dtsi: add internal delay for i2c IPsWolfram Sang1-0/+6
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-15ARM: shmobile: r8a7790: dtsi: add internal delay for i2c IPsWolfram Sang1-0/+4
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-15ARM: dts: lpc4337-ciaa: add i2c0 and devicesAriel D'Alessandro1-0/+30
Add I2C0 and two I2C EEPROM devices on the CIAA-NXP board: * 24AA1025 EEPROM, 1Mbit: it is accessed as two 512Kbit EEPROMs. * 24AA025E48 EEPROM, 2kbit. Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar> Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2015-12-15ARM: dts: lpc4337-ciaa: enable SCT-PWMAriel D'Alessandro1-0/+4
Enable the PWM based on the State Configurable Timer (SCT) included in the LPC4337 SoC of the CIAA-NXP board. Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar> Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2015-12-15ARM: dts: lpc4357-ea4357: add mma7455 i2c accelerometerJoachim Eastwood1-0/+5
Add Freescale MMA7455 3-axis I2C accelerometer as found on Embedded Artists' LPC4357 Developer's Kit to the device tree. This makes it possible to access the accelerometer through the API provided by IIO. Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2015-12-15ARM: dts: lpc4357: enable EEPROM memoryJoachim Eastwood1-0/+4
Enable EEPROM for all LPC435x/3x/2x/1x controllers that include the 16 kB EEPROM device. Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2015-12-15ARM: dts: lpc18xx: add EEPROM memory nodeAriel D'Alessandro1-0/+11
Add node for the NXP LPC18xx EEPROM memory which can be found in NXP LPC185x/3x and LPC435x/3x/2x/1x devices. Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar> Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2015-12-14ARM: dts: rockchip: add eFuse node for rk3188 SoCsCaesar Wang1-0/+13
This patch add the eFuse dt node for rk3188 SoCs. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-12-14ARM: dts: rockchip: add eFuse node for rk3066a SoCsCaesar Wang1-0/+13
This patch add the eFuse dt node for rk3066a SoCs. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-12-14ARM: dt: zynq: Add labels to cpu nodes to allow overriding OPPs.Moritz Fischer1-2/+2
By adding labels to the cpu nodes in the dtsi, a dts that includes it can change the OPPs by referencing the cpu0 through the label. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-12-14ARM: dts: zynq: describe SLCR as simple-mfd rather than simple-busMasahiro Yamada1-1/+1
The SLCR (System-Level Control Registers) block is an MFD (Multi Function Device) rather than a bus. "simple-mfd" seems a more suitable compatible string than "simple-bus". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-12-14ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source propertySudeep Holla1-2/+2
Though the keyboard driver for GPIO buttons(gpio-keys) will continue to check for/support the legacy "gpio-key,wakeup" boolean property to enable gpio buttons as wakeup source, "wakeup-source" is the new standard binding. This patch replaces the legacy "gpio-key,wakeup" with the unified "wakeup-source" property in order to avoid any futher copy-paste duplication. Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 06:17:50 +0300