| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Get rid of unused values in the enum.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Diagchannel.h is used primarily for the diagnostics channel. The
diagnostics channel is not being used by linux guests currently, so
the majority of the file is not needed. What is left is what is
needed to perform postcode vmcalls. Those postcodes will eventually
end up in the diag channel.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Give the enum the correct values instead of based on other values.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
min_size/max_size aren't used anywhere, and they were just causing
headaches in the drivers being ported over to the new interfaces.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes the legacy dev_info struct and instead creates
and passes around a traditional struct device.
This allows us to remove a lot of the various look up code and
removes the doubt if the struct exists or not.
Half of the churn is just the conversion of visorchipset_device_info
to visor_device. Various cleanups include re-arranging the failure
paths to make more sense.
Pay attention to the create_visor_device function. This had a lot of
churn to simplify everything.
Lots of functions disappeared because they are not needed any more.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes the legacy bus_info struct and instead creates
and passes around a traditional struct device.
This allows us to remove a lot of the various look up code and
removes the doubt if the struct exists or not.
Half of the churn is just the conversion of visorchipset_bus_info
to visor_device. Various cleanups include re-arranging the failure
paths to make more sense.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
I used 0 as the device id for the bus root, neglecting the fact that
device 0 is a valid id in Unisys's configuration. Modify this to
use UINT_MAX instead as a unique number.
As fallout from this change it was noticed the bus_no and dev_no was not
defined the same way consistently. Fix visorbus.h to use u32 there. Fix
the resulting printk warning too.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The bus driver doesn't work in server mode, just remove the left over
pieces.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removing stuff that isn't being used. Another prepartion patch to
allow us to use visor_device everywhere without the baggage of
bus/dev_info.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The bus device and regular device were using two different
structs. Let's combine them as they are not entirely different
from one another.
This allows us to move this creation up the stack later and
actually remove bus/dev_info easily.
Most of the churn is just renaming devdata -> dev and 'struct
visorbus_devdata' to 'struct visor_device'.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This change was detected with help of checkpatch.pl script.
Signed-off-by: Chaitanya Dhere <cvijaydh@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In this patch, the if, else conditions are modified to remove the
unnecessary equality checks. This change was detected with help of
coccinelle tool.
Signed-off-by: Chaitanya Dhere <cvijaydh@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Style (line over 80 chars) in drivers/staging/wlan-ng/prism2fw.c
Signed-off-by: Douglas Barbonaglia Sathler Figueiredo <eng.douglasfigueiredo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
removed the commented INFO lines.
Signed-off-by: Madhusudhanan Ravindran <mravindr@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed indentation issue in few lines
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
remove an unwanted assignment to a variable which is overwritten in the
very next line.The first value assigned is not used.
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the ununsed Macro
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Insert Spaces after commas to rectify the
following checkpatch errors in ddk750_display.c:
ERROR: space required after that ','
Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Insert Spaces after commas to rectify the following
checkpatch errors in ddk750_help.c and ddk750_mode.c:
ERROR: space required after that ','
Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Insert Spaces after commas to rectify the following
checkpatch errors in ddk750_power.c and ddk750_swi2c.c:
ERROR: space required after that ','
Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>:
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Insert Spaces after commas to rectify the
following checkpatch errors in sm750_cursor.c:
ERROR: space required after that ','
Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Insert Spaces after commas to rectify the
following checkpatch errors in sm750_accel.c:
ERROR: space required after that ','
Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Insert Spaces after commas to rectify the
following checkpatch errors in sm750_hw.c:
ERROR: space required after that ','
Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Insert Spaces after commas to rectify the
following checkpatch errors in ddk750_hwi2c.h,
ddk750_help.h and ddk750_chip.h:
ERROR: space required after that ','
Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Insert Spaces after commas to rectify the
following checkpatch errors in sm750_cursor.h,
sm750_accel.h, ddk750_power.h and ddk750_mode.h:
ERROR: space required after that ','
Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Insert Spaces after commas to rectify the
following checkpatch errors in sm750.h:
ERROR: space required after that ','
Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Insert Spaces after commas to rectify the
following checkpatch errors in sm750_help.h:
ERROR: space required after that ','
Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Insert Spaces after commas in sm750_hw.h to rectify the
following checkpatch errors in sm750_hw.h:
ERROR: space required after that ','
Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The sm750fb driver has few Framebuffer configuration dependencies that
need to be selected in order to get compiled successfully
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Source and destination have the same little-endian annotation: this
patch removes incorrect byte-swap on non-LE cpus.
This addresses the following sparse warning:
drivers/staging/rtl8723au/core/rtw_mlme_ext.c:3911:56: warning: incorrect type in argument 1 (different base types)
drivers/staging/rtl8723au/core/rtw_mlme_ext.c:3911:56: expected unsigned short [unsigned] [usertype] val
drivers/staging/rtl8723au/core/rtw_mlme_ext.c:3911:56: got restricted __le16 [usertype] BA_timeout_value
Signed-off-by: David Decotigny <ddecotig@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This fixes bitwise arithmetic performed on the host on a variable
previously converted to little-endian, and subsequently converted
again to little-endian:
- issue_action_BA23a() called with "status" crafted in host byte order
- "status" converted to LE
- bitwise arithmetic on the (LE) "status", performed with masks and
shifts in host byte order
- result converted to LE (again) and stored in device structure
Sparse warning addressed by this patch:
drivers/staging/rtl8723au/core/rtw_mlme_ext.c:3806:16: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8723au/core/rtw_mlme_ext.c:3806:16: expected unsigned short [unsigned] status
drivers/staging/rtl8723au/core/rtw_mlme_ext.c:3806:16: got restricted __le16 [usertype] <noident>
Additional notes: initial cpu_to_le16 was introduced by kernel bulk
commit 5e93f3520 "staging: r8723au: Add source files for new driver
- part 1", initially from github according to commit description. On
github, this traces back to another bulk commit: 2896bda04353 "Add
new files in core directory", which is the 1st version of the
driver.
Signed-off-by: David Decotigny <ddecotig@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
str was 16 bytes but was mentioned as 128 in snprintf.
again msg is 128 bytes but not sufficient to hold the complete debug
message of register values.
Now removed the use of str, msg and print the register values from the
loop.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch attempts to simplify the debugging using standard
dev_dbg call so that individual debug prints can be enabled or
disbled by dynamic debugging rather than using module params.
Signed-off-by: Madhusudhanan Ravindran <mravindr@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace unnecessary conditional checks for variable 'ret' and replace
by single return statement.
Signed-off-by: Abhishek Sharma <asharm14@visteon.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fix warning given by checkpatch.pl abouts spaces given
before tab
Signed-off-by: Joglekar Tejas <joglekartejas@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
cleanup checkpatch.pl warnings about not needed else
clauses after a break or return
Signed-off-by: Antonio Murdaca <antonio.murdaca@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add some limits here so we don't corrupt memory.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removing the commented code lines.
Signed-off-by: Abhishek Sharma <asharm14@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removing the commented static variable declerations.
Signed-off-by: Abhishek Sharma <asharm14@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove commented code from this file.
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function WILC_WFI_InitPriv() is not used anywhere in the
driver.Hence remove it.
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
use the time_after_eq macro for the comparison operation
Signed-off-by: Hari Prasath Gujulan yyElango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove dead code or commented code
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove ununecessary typecast for kzalloc.This patch was generated by
coccinelle tool
Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In this patch, ARRAY_SIZE() macro is used to determine the
size. This change was detected with the help of coccinelle
tool.
Signed-off-by: Chaitanya Dhere <cvijaydh@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
size_t should print using %zu and unsigned long int should use %lu
but here it was using %d and hence we were getting warning while
printing.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The rq_buflen field of the lov_request structure is never initialized. It
is only used in the free of req->rq_oi.oi_md in lov_finish_set. But no
oi_md field is ever initialized to the result of calling OBD_ALLOC_LARGE.
So it seems that the call to OBD_FREE_LARGE in lov_finish_set and the
rq_buflen in the lov_request structure are simply not needed.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The fields set_oabufs and set_pga fields in the lov_request_set structure
are never set, so drop them. Drop also the corresponding test and free in
lov_finish_set.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The lov_lock_handles structure is only used as the type of the field
set_lockh in the lov_request_set structure, and this field is never set to
any value. Drop a test and free of this field in lov_finish_set. This
change enables also removing the functions lov_handle2llh and lov_llh_put
that manipulate values of type lov_lock_handles, but are now never called.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We know "rc == 0" so there is no need to check.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
