summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-11-08drbd: complete_conflicting_writes() should not care about connectionsLars Ellenberg1-20/+26
complete_conflicting_writes() should not cause -EIO. It should not timeout either, or care for connection states. Connection timeout is detected elsewhere, and it's cleanup path is supposed to remove any pending requests or peer_requests from the write_requests tree. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: simplify retry path of failed READ requestsLars Ellenberg3-67/+19
If a local or remote READ request fails, just push it back to the retry workqueue. It will re-enter __drbd_make_request, and be re-assigned to a suitable local or remote path, or failed, if we do not have access to good data anymore. This obsoletes w_read_retry_remote(), and eliminates two goto...retry blocks in __req_mod() Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: move put_ldev from __req_mod() to the endio callbackLars Ellenberg2-4/+1
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: factor out master_bio completion and drbd_request destruction pathsLars Ellenberg1-36/+58
In preparation for multiple connections and reference counting, separate the code paths for completion of the master bio and destruction of the request object. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: conflicting writes: make wake_up of waiting peer_requests explicitLars Ellenberg1-4/+15
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: fix WRITE_ACKED_BY_PEER_AND_SIS to not set RQ_NET_DONELars Ellenberg1-10/+5
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: fix READ_RETRY_REMOTE_CANCELED to not complete if device is suspendedLars Ellenberg1-3/+1
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: make OOS_HANDED_TO_NETWORK its own caseLars Ellenberg1-8/+8
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: fix potential deadlock during "restart" of conflicting writesLars Ellenberg4-32/+99
w_restart_write(), run from worker context, calls __drbd_make_request() and further drbd_al_begin_io(, delegate=true), which then potentially deadlocks. The previous patch moved a BUG_ON to expose such call paths, which would now be triggered. Also, if we call __drbd_make_request() from resource worker context, like w_restart_write() did, and that should block for whatever reason (!drbd_state_is_stable(), resource suspended, ...), we potentially deadlock the whole resource, as the worker is needed for state changes and other things. Create a dedicated retry workqueue for this instead. Also make sure that inc_ap_bio()/dec_ap_bio() are properly paired, even if do_retry() needs to retry itself, in case __drbd_make_request() returns != 0. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: don't pretend that barrier_nr == 0 was specialLars Ellenberg1-3/+1
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: remove unused static helper functionLars Ellenberg1-12/+0
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: remove some very outdated commentsLars Ellenberg1-7/+0
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: fix memleak in error path in bm_rw and drbd_bm_write_rangeLars Ellenberg1-6/+4
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: missing wakeup after drbd_rs_del_allLars Ellenberg1-0/+1
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: remove now unused seq_num member from struct drbd_requestLars Ellenberg2-2/+1
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: fix potential data corruption and protocol errorLars Ellenberg2-3/+3
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Fixed detachLars Ellenberg1-1/+1
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Fix a potential write ordering issue on SyncTarget nodesLars Ellenberg1-0/+30
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Fix a potential race that could case data inconsistencyLars Ellenberg1-2/+4
When we have a write request and a state change C_WF_BITMAP_S -> C_SYNC_SOURCE at the same time, and it happens that the line remote = remote && drbd_should_do_remote(s); stills sees C_WF_BITMAP_S, and send_oos = rw == WRITE && drbd_should_send_oos(s); already sees C_SYNC_SOURCE both are 0. This causes the write to not be mirrored, but marked as out-of-sync on the Sync_Source node. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Consider that bio->bi_bdev might be modified below DRBDPhilipp Reisner1-3/+1
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: add missing part_round_stats to _drbd_start_io_acctPhilipp Reisner1-0/+1
Without this, iostat frequently sees bogus svctime and >= 100% "utilization". Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Fix module refcount leak in drbd_accept()Philipp Reisner1-0/+1
drbd_accept was modelled after kernel_accept with drbd commit 53eb779 in July 2008. Only, kernel_accept was then broken, and only fixed later with kernel commit 1b08534e in Dec 2008: net: Fix module refcount leak in kernel_accept() Impact: protocol families provided as modules, e.g. ipv6 or ib_sdp, would soon have their reference count become negative, preventing them from being unloaded (likely), or worse, hit zero without actually being unused, allowing them to be unloaded while still in use (unlikely, but if triggered, causing a kernel crash). Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: If disk timeout expires fail only the affected volumePhilipp Reisner1-1/+3
...and not all volumes of the resource Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Consider the disk-timeout also for meta-data IO operationsPhilipp Reisner4-31/+48
If the backing device is already frozen during attach, we failed to recognize that. The current disk-timeout code works on top of the drbd_request objects. During attach we do not allow IO and therefore never generate a drbd_request object but block before that in drbd_make_request(). This patch adds the timeout to all drbd_md_sync_page_io(). Before this patch we used to go from D_ATTACHING directly to D_DISKLESS if IO failed during attach. We can no longer do this since we have to stay in D_FAILED until all IO ops issued to the backing device returned. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Reinstate disabling AL updates with invalidate-remotePhilipp Reisner2-1/+44
Commit d0ef827e (drbd: switch configuration interface from connector to genetlink) introduced a regression by removing the ability to set all bits in the out of sync bitmap and to suspend updates to the activity log of a disconnected device via the invalidate-remote management call. Credits for reporting the issue are going to Arne Redlich. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: explicitly clear unused dp_flags in drbd_send_blockLars Ellenberg1-0/+1
We send left-over garbage from the previous packet in P_DATA_REPLY and P_RS_DATA_REPLY packets. That's bad behaviour. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Fixed compat issue with disconnecting 8.4 from a primary 8.3Philipp Reisner3-0/+9
For compatibility reasons 8.4 has to send P_STATE_CHG_REQ (instead of P_CONN_ST_CHG_REQ) when disconnecting. In the receiving code path we missed to convert the old answer (P_STATE_CHG_REPLY) back to 8.4 logic. Therefore the CL_ST_CHG_SUCCESS or CL_ST_CHG_FAIL bit in the flags word of mdev got set, while the state code was waiting for the CONN_WD_ST_CHG_OKAY or CONN_WD_ST_CHG_FAIL bits in tconn. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: drbd_bm_ALe_set_all(): Remove unused functionAndreas Gruenbacher2-48/+0
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: restart loop in drbd_make_request() [prepare for Linux-3.2]Philipp Reisner1-4/+7
With Linux-3.2 generic_make_request() will no longer loop over the request function until it finally returns 0. Move this loop into our drbd_make_request() function. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Restore late assigning of tconn->data.sock and meta.sockPhilipp Reisner1-49/+57
With commit from Mon Mar 28 16:33:12 2011 +0200 "drbd: drbd_connect(): Initialize struct drbd_socket before sending anything" tconn->data.sock and tconn->meta.sock get assigned early, in conn_connect. The early assigning can trigger an OOPS, because it may released the socket without acquiring the mutex protecting the socket. An other thread (worker) might use setsockopt() on the socket while it gets free()ed. Restored the (proven) 8.3 behavior of assigning these sockets after the two connections are established. Credits for reporting the issue are going to Arne Redlich. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Log failures of connection state changesPhilipp Reisner1-1/+7
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Consider that read requests could be NEG_ACKEDedPhilipp Reisner1-1/+2
ap_in_flight only counts writes. NEG_ACKED is an action on a request that might be called for reads and writes. This bug was there forever, but it becomes much more relevant with the read balincing code. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Do not send state packets while lower than C_CONNECTED cstatePhilipp Reisner1-3/+6
I.e. in C_WF_REPORT_PARAMS or in C_WF_CONNECTION. Sending may already work in these cstates, but the peer still expects the HandShake / ConnectionFeatures packet. Actually triggered by the Testuite on kugel. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: fix race between disconnect and receive_statePhilipp Reisner1-0/+13
If the asender thread, or request_timer_fn(), or some other part of the code, decided to drop the connection (because of timeout or other), but the receiver just now was processing a P_STATE packet, there was a chance that receive_state() would do a hard state change "re-establishing" an already failed connection without additional handshake. Log excerpt: Remote failed to finish a request within ko-count * timeout peer( Secondary -> Unknown ) conn( Connected -> Timeout ) pdsk( UpToDate -> DUnknown ) asender terminated ... peer( Unknown -> Secondary ) conn( Timeout -> Connected ) pdsk( DUnknown -> UpToDate ) peer_isp( 0 -> 1 ) ... Connection closed peer( Secondary -> Unknown ) conn( Connected -> Unconnected ) pdsk( UpToDate -> DUnknown ) peer_isp( 1 -> 0 ) receiver terminated Impact: while the connection state is erroneously "Connected", requests may be queued and even sent, which would never be acknowledged, and may have been missed by the cleanup. These requests would never be completed. The next drbd_suspend_io() will then lock up, waiting forever for these requests to complete. Fixed in several code paths: Make sure the connection state is NetworkFailure or worse before starting the cleanup in drbd_disconnect(). This should make sure the cleanup won't miss any requests. Disallow receive_state() to "upgrade" the connection state from an error state. This will make sure the "illegal" state transition won't happen. For all connection failure states, relax the safe-guard in sanitize_state() again to silently mask out those state changes (e.g. Timeout -> Connected becomes Timeout -> Timeout). Note by Philipp Reisner: The 3rd chunk described as "relax the safe-guard..." is not there in 8.4 as it is relaxed to the maximum in 8.4 already Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Do not call generic_make_request() while holding req_lockPhilipp Reisner1-22/+22
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Load balancing method: stripingPhilipp Reisner2-2/+17
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Load balancing of read requestsPhilipp Reisner6-2/+68
New config option for the disk secition "read-balancing", with the values: prefer-local, prefer-remote, round-robin, when-congested-remote. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Get rid of "ASSERTION FAILED: tconn->current_epoch->list not empty"Philipp Reisner1-0/+5
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: add missing rcu locks around recently introduced idr_for_eachLars Ellenberg1-12/+20
Recent commit drbd: Move write_ordering from mdev to tconn introduced a new idr_for_each loop over all volumes, but did not take necessary rcu locks or krefs. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Remove leftover prototypeAndreas Gruenbacher1-2/+0
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: fix potential spinlock deadlockPhilipp Reisner1-8/+12
drbd_try_clear_on_disk_bm() has a sanity check for the number of blocks left to be resynced (rs_left) in the current resync extent. If it detects a mismatch, it complains, and forces a disconnect using drbd_force_state(mdev, NS(conn, C_DISCONNECTING)); Unfortunately, this may be called while holding the req_lock, and drbd_force_state() want's to aquire that lock itself. Deadlock. Don't force a disconnect, but fix up rs_left by recounting and reassigning the number of dirty blocks in that extent. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Fix the WO=drain implementation for multiple volumesPhilipp Reisner1-1/+17
Wait until IO is drained in all volumes. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Switch drbd_may_finish_epoch() from mdev to tconnPhilipp Reisner1-7/+5
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Move list of epochs from mdev to tconnPhilipp Reisner4-43/+42
This is necessary since the transfer_log on the sending is also per tconn. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Prepare epochs per connectionPhilipp Reisner2-2/+4
An epoch object needs a pointer to the mdev it was received for. This is necessary to be able to send the barrier ack packet for the same volume as the original barrier packet was assigned to. This prepares the next step, in which the (receiver side) epoch list is moved from the device (mdev) to the connection (tconn) object. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Move write_ordering from mdev to tconnPhilipp Reisner5-31/+48
This is necessary in order to prepare the move of the (receiver side) epoch list from the device (mdev) to the connection (tconn) objects. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Move the CREATE_BARRIER flag from connection to devicePhilipp Reisner3-18/+14
That is necessary since the whole transfer log is per connection(tconn) and not per device(mdev). This bug caused list corruption on the worker list. When a barrier is queued for sending in the context of one device, another device did not see the CREATE_BARRIER bit, and queued the same object again -> list corruption. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Fixed an obvious copy-n-paste mistakePhilipp Reisner2-2/+2
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Fixes from the drbd-8.3 branchPhilipp Reisner5-18/+40
* drbd-8.3: drbd: O_SYNC gives EIO on ramdisks for some kernels (eg. RHEL6). drbd: send intermediate state change results to the peer Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2012-11-08drbd: Fixes from the drbd-8.3 branchPhilipp Reisner4-3/+26
* drbd-8.3: drbd: fix spurious meta data IO "error" drbd: Fixed a race condition between detach and start of resync drbd: fix harmless race to not trigger an ASSERT drbd: Derive sync-UUIDs only from the bitmap-uuid if it is non-zero drbd: Fixed current UUID generation (regression introduced recently, after 8.3.11) Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 13:45:08 +0300