| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When building for LaTeX, it stops and enters into interactive
mode on errors. Don't do that, as there are some non-fatal errors
on media books when using Sphinx 1.4.x that we don't know how fix
yet.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Let's escape the LaTeX characters, to avoid troubles when
outputing them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
As we have big tables, reduce the left/right margins and decrease
the point size to 8pt. Visually, it is still good enough, and
now less tables are too big to be displayed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
pdflatex doesn't accept using some UTF-8 chars, like
"equal or less than" or "equal or greater than" chars. However,
the media documents use them. So, we need to use XeLaTeX for
conversion, and a font that accepts such characters.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The output for those notes are bad in pdf, as they're not
in a box with a different color. Also, it causes the output
to not build if the note is inside a table.
Change its implementation to avoid the above troubles.
The logic there came from:
https://stackoverflow.com/questions/606746/how-to-customize-an-existing-latex-environment-without-interfering-with-other-en
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Portrait is too small for some tables used at the media docs.
So, allow documents to tell Sphinx to generate some pages
in landscape by using:
.. raw:: latex
\begin{landscape}
<some stuff>
.. raw:: latex
\end{landscape}
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The usage of rst2pdf was replaced by pdflatex on a previous
patch. Remove the left-over code at conf.py.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
changeset 606b9ac81a63 ("doc-rst: generic way to build only sphinx
sub-folders") accidentally broke PDF generation by adding an extra
")". Remove it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
KASAN has been supported on arm64 since 39d114ddc682 ("arm64: add KASAN
support"). Update the docs to indicate this.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Add a index if only a sub-folder is build e.g.::
make SPHINXDIRS=media cleandocs htmldocs
BTW: removed dead search link in the top-index file
Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Improper menuconfig usage leads to empty menu entries.
zconfdump() is able to reveal some real-life examples:
- menuconfig VFIO_NOIOMMU
- menuconfig RESET_CONTROLLER
- menuconfig SND_ARM
To avoid future occurrences of those, improve the menuconfig syntax
description.
Signed-off-by: Eugeniu Rosca <rosca.eugeniu@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Hi Jon,
This patch is an old one, we have corrected some minor issues on the newer one.
Please only review the newest version from my last mail with this subject
"[PATCH] ACPI: Update the maximum depth of C-state from 6 to 9".
And I also attached it to this mail.
Thanks,
Baole
On 7/11/2016 6:37 AM, Jonathan Corbet wrote:
> On Mon, 4 Jul 2016 09:55:10 +0800
> "baolex.ni" <baolex.ni@intel.com> wrote:
>
>> Currently, CPUIDLE_STATE_MAX has been defined as 10 in the cpuidle head file,
>> and max_cstate = CPUIDLE_STATE_MAX – 1, so 9 is the right maximum depth of C-state.
>> This change is reflected in one place of the kernel-param file,
>> but not in the other place where I suggest changing.
>>
>> Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
>> Signed-off-by: Baole Ni <baolex.ni@intel.com>
>
> So why are there two signoffs on a single-line patch? Which one of you
> is the actual author?
>
> Thanks,
>
> jon
>
From cf5f8aa6885874f6490b11507d3c0c86fa0a11f4 Mon Sep 17 00:00:00 2001
From: Chuansheng Liu <chuansheng.liu@intel.com>
Date: Mon, 4 Jul 2016 08:52:51 +0800
Subject: [PATCH] Update the maximum depth of C-state from 6 to 9
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Currently, CPUIDLE_STATE_MAX has been defined as 10 in the cpuidle head file,
and max_cstate = CPUIDLE_STATE_MAX – 1, so 9 is the right maximum depth of C-state.
This change is reflected in one place of the kernel-param file,
but not in the other place where I suggest changing.
Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Baole Ni <baolex.ni@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Now, the A83T and A64 SoC user manuals are available.
Update the documentation to add the links.
An updated version of A83T datasheet is also included now.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
It is not a very good practice to define the IOCTL manually instead of
using the header file.
Fix it on the documentation example.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Some architectures (i.e.: sparc64 and arm64) make reasonable partial stack
duplication for jprobes problematic. Document this.
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
|
|
|
|
Because Linus may still be reading source code on greenbar paper
instead of color terminals with code syntax highlighting and
appropriate font decorations.
Link: http://lkml.kernel.org/r/CA+55aFyQYJerovMsSoSKS7PessZBr4vNp-3QUUwhqk4A4_jcbg@mail.gmail.com
Signed-off-by: Joe Perches <joe@perches.com>
|
|
Chapter 7 (Centralized exiting of functions) of the coding style
documentation is unclear at times, and lacks some information (such
as the possibility to indent labels with a single space.) Clarify and
complete it.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Markus Elfring <elfring@users.sourceforge.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Support for i386 was removed in v3.8, delete the paragraph that says
processor types above 386 won't work on that architecture. It's obsolete
information and potentially confusing. Also change a couple of
"arch/i386/" paths to one that exists now, using "arch/x86/" instead.
Signed-off-by: Øyvind A. Holm <sunny@sunbase.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Remove the distracting (left/right) padding of inline literals. (HTML
<code>). Requested and discussed in [1].
[1] http://www.spinics.net/lists/linux-media/msg103991.html
Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Commit 'b09d6d991' removes include/linux/clk-private.h and
re-arranges the clock related structures contained in it in
different files. The documentation has not been updated
accordingly, thus it wasn't anymore consistent.
Place the structures referenced by Documentation/clk.txt in the
correct files and update their contents to the latest status.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
[geert: Fix path to clk.c, whitespace, more clk_core, ...]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
To stop the sphinx-build on severe errors and exit with an exit code (to
stop make) the halt_level must be set. The halt_level can't be set from
sphinx, it is a docutils configuration [1]. For this a docutils.conf was
added.
[1] http://docutils.sourceforge.net/docs/user/config.html
Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
With the gpu/conf.py, the gpu folder can be build and distributed
stand-alone. To compile only the html of 'gpu' folder use::
make SPHINXDIRS="gpu" htmldocs
Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The media/conf_nitpick.py is a *build-theme* wich uses the nit-picking
mode of sphinx. To compile only the html of 'media' with the nit-picking
build use::
make SPHINXDIRS=media SPHINX_CONF=conf_nitpick.py htmldocs
With this, the Documentation/conf.py is read first and updated with the
configuration values from the Documentation/media/conf_nitpick.py.
The origin media/conf_nitpick.py comes from Mauro's experimental
docs-next branch::
https://git.linuxtv.org/mchehab/experimental.git mchehab/docs-next
BTW fixed python indentation in media/conf_nitpick.py. Python
indentation is 4 spaces [1] and Python 3 disallows mixing the use of
tabs and spaces for indentation [2].
[1] https://www.python.org/dev/peps/pep-0008/#indentation
[2] https://www.python.org/dev/peps/pep-0008/#tabs-or-spaces
Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
With the media/conf.py, and media/index.rst the media folder can be
build and distributed stand-alone.
Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Add a generic way to build only a reST sub-folder with or
without a individual *build-theme*.
* control *sub-folders* by environment SPHINXDIRS
* control *build-theme* by environment SPHINX_CONF
Folders with a conf.py file, matching $(srctree)/Documentation/*/conf.py
can be build and distributed *stand-alone*. E.g. to compile only the
html of 'media' and 'gpu' folder use::
make SPHINXDIRS="media gpu" htmldocs
To use an additional sphinx-build configuration (*build-theme*) set the
name of the configuration file to SPHINX_CONF. E.g. to compile only the
html of 'media' with the *nit-picking* build use::
make SPHINXDIRS=media SPHINX_CONF=conf_nitpick.py htmldocs
With this, the Documentation/conf.py is read first and updated with the
configuration values from the Documentation/media/conf_nitpick.py.
Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
|
|
Although pdflatex is more robust than rst2pdf, building media
documentation pdf still fails. Exclude media documentation from pdf
generation for now.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Markus Heiser <markus.heiser@darmarit.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Looks like rst2pdf is not robust enough, especially for large documents.
Use recursive make on the Sphinx generated makefile to convert latex to
pdf. The ugly detail is that pdf is generated into
Documentation/output/latex.
Unfortunately, the pdflatex build generates huge amounts of build log
noise, and also fails in the end. We'll fix that next.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Markus Heiser <markus.heiser@darmarit.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This is a stopgap measure to allow building outputs other than html.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Markus Heiser <markus.heiser@darmarit.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
With the conf.py change, we don't need them to avoid warnings anymore.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This should eliminate a whole class of markup warnings, at the cost of
occasionally amusing markup choices; we'll have to see if it works out.
Suggested-by: Markus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Linux 4.8-rc1
* tag 'v4.8-rc1': (6093 commits)
Linux 4.8-rc1
block: rename bio bi_rw to bi_opf
target: iblock_execute_sync_cache() should use bio_set_op_attrs()
mm: make __swap_writepage() use bio_set_op_attrs()
block/mm: make bdev_ops->rw_page() take a bool for read/write
fs: return EPERM on immutable inode
ramoops: use persistent_ram_free() instead of kfree() for freeing prz
ramoops: use DT reserved-memory bindings
NTB: ntb_hw_intel: use local variable pdev
NTB: ntb_hw_intel: show BAR size in debugfs info
ntb_test: Add a selftest script for the NTB subsystem
ntb_perf: clear link_is_up flag when the link goes down.
ntb_pingpong: Add a debugfs file to get the ping count
ntb_tool: Add link status and files to debugfs
ntb_tool: Postpone memory window initialization for the user
ntb_perf: Wait for link before running test
ntb_perf: Return results by reading the run file
ntb_perf: Improve thread handling to increase robustness
ntb_perf: Schedule based on time not on performance
ntb_transport: Check the number of spads the hardware supports
...
|
|
|
|
Pull more block fixes from Jens Axboe:
"As mentioned in the pull the other day, a few more fixes for this
round, all related to the bio op changes in this series.
Two fixes, and then a cleanup, renaming bio->bi_rw to bio->bi_opf. I
wanted to do that change right after or right before -rc1, so that
risk of conflict was reduced. I just rebased the series on top of
current master, and no new ->bi_rw usage has snuck in"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: rename bio bi_rw to bi_opf
target: iblock_execute_sync_cache() should use bio_set_op_attrs()
mm: make __swap_writepage() use bio_set_op_attrs()
block/mm: make bdev_ops->rw_page() take a bool for read/write
|
|
Pull drm zpos property support from Dave Airlie:
"This tree was waiting on some media stuff I hadn't had time to get a
stable branchpoint off, so I just waited until it was all in your tree
first.
It's been around a bit on the list and shouldn't affect anything
outside adding the generic API and moving some ARM drivers to using
it"
* tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux:
drm: rcar: use generic code for managing zpos plane property
drm/exynos: use generic code for managing zpos plane property
drm: sti: use generic zpos for plane
drm: add generic zpos property
|
|
Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.
No intended functional changes in this commit.
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
The original commit missed this function, it needs to mark it a
write flush.
Cc: Mike Christie <mchristi@redhat.com>
Fixes: e742fc32fcb4 ("target: use bio op accessors")
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Cleaner than manipulating bio->bi_rw flags directly.
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Commit abf545484d31 changed it from an 'rw' flags type to the
newer ops based interface, but now we're effectively leaking
some bdev internals to the rest of the kernel. Since we only
care about whether it's a read or a write at that level, just
pass in a bool 'is_write' parameter instead.
Then we can also move op_is_write() and friends back under
CONFIG_BLOCK protection.
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Pull documentation fixes from Jonathan Corbet:
"Three fixes for the docs build, including removing an annoying warning
on 'make help' if sphinx isn't present"
* tag 'doc-4.8-fixes' of git://git.lwn.net/linux:
DocBook: use DOCBOOKS="" to ignore DocBooks instead of IGNORE_DOCBOOKS=1
Documenation: update cgroup's document path
Documentation/sphinx: do not warn about missing tools in 'make help'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/binfmt_misc
Pull binfmt_misc update from James Bottomley:
"This update is to allow architecture emulation containers to function
such that the emulation binary can be housed outside the container
itself. The container and fs parts both have acks from relevant
experts.
To use the new feature you have to add an F option to your binfmt_misc
configuration"
From the docs:
"The usual behaviour of binfmt_misc is to spawn the binary lazily when
the misc format file is invoked. However, this doesn't work very well
in the face of mount namespaces and changeroots, so the F mode opens
the binary as soon as the emulation is installed and uses the opened
image to spawn the emulator, meaning it is always available once
installed, regardless of how the environment changes"
* tag 'binfmt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/binfmt_misc:
binfmt_misc: add F option description to documentation
binfmt_misc: add persistent opened binary handler for containers
fs: add filp_clone_open API
|
|
In most cases, EPERM is returned on immutable inode, and there're only a
few places returning EACCES. I noticed this when running LTP on
overlayfs, setxattr03 failed due to unexpected EACCES on immutable
inode.
So converting all EACCES to EPERM on immutable inode.
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more vfs updates from Al Viro:
"Assorted cleanups and fixes.
In the "trivial API change" department - ->d_compare() losing 'parent'
argument"
* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
cachefiles: Fix race between inactivating and culling a cache object
9p: use clone_fid()
9p: fix braino introduced in "9p: new helper - v9fs_parent_fid()"
vfs: make dentry_needs_remove_privs() internal
vfs: remove file_needs_remove_privs()
vfs: fix deadlock in file_remove_privs() on overlayfs
get rid of 'parent' argument of ->d_compare()
cifs, msdos, vfat, hfs+: don't bother with parent in ->d_compare()
affs ->d_compare(): don't bother with ->d_inode
fold _d_rehash() and __d_rehash() together
fold dentry_rcuwalk_invalidate() into its only remaining caller
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull more xfs updates from Dave Chinner:
"This is the second part of the XFS updates for this merge cycle, and
contains the new reverse block mapping feature for XFS.
Reverse mapping allows us to track the owner of a specific block on
disk precisely. It is implemented as a set of btrees (one per
allocation group) that track the owners of allocated extents.
Effectively it is a "used space tree" that is updated when we allocate
or free extents. i.e. it is coherent with the free space btrees we
already maintain and never overlaps with them.
This reverse mapping infrastructure is the building block of several
upcoming features - reflink, copy-on-write data, dedupe, online
metadata and data scrubbing, highly accurate bad sector/data loss
reporting to users, and significantly improved reconstruction of
damaged and corrupted filesystems. There's a lot of new stuff coming
along in the next couple of cycles,a nd it all builds in the rmap
infrastructure.
As such, it's a huge chunk of new code with new on-disk format
features and internal infrastructure. It warns at mount time as an
experimental feature and that it may eat data (as we do with all new
on-disk features until they stabilise). We have not released
userspace suport for it yet - userspace support currently requires
download from Darrick's xfsprogs repo and build from source, so the
access to this feature is really developer/tester only at this point.
Initial userspace support will be released at the same time kernel
with this code in it is released.
The new rmap enabled code regresses 3 xfstests - all are ENOSPC
related corner cases, one of which Darrick posted a fix for a few
hours ago. The other two are fixed by infrastructure that is part of
the upcoming reflink patchset. This new ENOSPC infrastructure
requires a on-disk format tweak required to keep mount times in
check - we need to keep an on-disk count of allocated rmapbt blocks so
we don't have to scan the entire btrees at mount time to count them.
This is currently being tested and will be part of the fixes sent in
the next week or two so users will not be exposed to this change"
* tag 'xfs-rmap-for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (52 commits)
xfs: move (and rename) the deferred bmap-free tracepoints
xfs: collapse single use static functions
xfs: remove unnecessary parentheses from log redo item recovery functions
xfs: remove the extents array from the rmap update done log item
xfs: in btree_lshift, only allocate temporary cursor when needed
xfs: remove unnecesary lshift/rshift key initialization
xfs: remove the get*keys and update_keys btree ops pointers
xfs: enable the rmap btree functionality
xfs: don't update rmapbt when fixing agfl
xfs: disable XFS_IOC_SWAPEXT when rmap btree is enabled
xfs: add rmap btree block detection to log recovery
xfs: add rmap btree geometry feature flag
xfs: propagate bmap updates to rmapbt
xfs: enable the xfs_defer mechanism to process rmaps to update
xfs: log rmap intent items
xfs: create rmap update intent log items
xfs: add rmap btree insert and delete helpers
xfs: convert unwritten status of reverse mappings
xfs: remove an extent from the rmap btree
xfs: add an extent to the rmap btree
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull qstr constification updates from Al Viro:
"Fairly self-contained bunch - surprising lot of places passes struct
qstr * as an argument when const struct qstr * would suffice; it
complicates analysis for no good reason.
I'd prefer to feed that separately from the assorted fixes (those are
in #for-linus and with somewhat trickier topology)"
* 'work.const-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
qstr: constify instances in adfs
qstr: constify instances in lustre
qstr: constify instances in f2fs
qstr: constify instances in ext2
qstr: constify instances in vfat
qstr: constify instances in procfs
qstr: constify instances in fuse
qstr constify instances in fs/dcache.c
qstr: constify instances in nfs
qstr: constify instances in ocfs2
qstr: constify instances in autofs4
qstr: constify instances in hfs
qstr: constify instances in hfsplus
qstr: constify instances in logfs
qstr: constify dentry_init_security
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull mailcap fixlets from Mauro Carvalho Chehab:
"A small fixup for my and Shuah's entries in .mailcap.
Basically, those entries were with a syntax that makes
get_maintainer.pl to do the wrong thing"
* tag 'media/v4.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
.mailmap: Correct entries for Mauro Carvalho Chehab and Shuah Khan
|
|
Pull virtio/vhost updates from Michael Tsirkin:
- new vsock device support in host and guest
- platform IOMMU support in host and guest, including compatibility
quirks for legacy systems.
- misc fixes and cleanups.
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
VSOCK: Use kvfree()
vhost: split out vringh Kconfig
vhost: detect 32 bit integer wrap around
vhost: new device IOTLB API
vhost: drop vringh dependency
vhost: convert pre sorted vhost memory array to interval tree
vhost: introduce vhost memory accessors
VSOCK: Add Makefile and Kconfig
VSOCK: Introduce vhost_vsock.ko
VSOCK: Introduce virtio_transport.ko
VSOCK: Introduce virtio_vsock_common.ko
VSOCK: defer sock removal to transports
VSOCK: transport-specific vsock_transport functions
vhost: drop vringh dependency
vop: pull in vhost Kconfig
virtio: new feature to detect IOMMU device quirk
balloon: check the number of available pages in leak balloon
vhost: lockless enqueuing
vhost: simplify work flushing
|
|
Pull more KVM updates from Paolo Bonzini:
- ARM bugfix and MSI injection support
- x86 nested virt tweak and OOPS fix
- Simplify pvclock code (vdso bits acked by Andy Lutomirski).
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
nvmx: mark ept single context invalidation as supported
nvmx: remove comment about missing nested vpid support
KVM: lapic: fix access preemption timer stuff even if kernel_irqchip=off
KVM: documentation: fix KVM_CAP_X2APIC_API information
x86: vdso: use __pvclock_read_cycles
pvclock: introduce seqcount-like API
arm64: KVM: Set cpsr before spsr on fault injection
KVM: arm: vgic-irqfd: Workaround changing kvm_set_routing_entry prototype
KVM: arm/arm64: Enable MSI routing
KVM: arm/arm64: Enable irqchip routing
KVM: Move kvm_setup_default/empty_irq_routing declaration in arch specific header
KVM: irqchip: Convey devid to kvm_set_msi
KVM: Add devid in kvm_kernel_irq_routing_entry
KVM: api: Pass the devid in the msi routing entry
|
