| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There are several undocumented functions here; document them.
While here, make checkpatch.pl happy.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Documentation/output/cec.h.rst:6: WARNING: c:type reference target not found: cec_event_state_change
Documentation/output/cec.h.rst:6: WARNING: c:type reference target not found: cec_event_state_change
Documentation/output/cec.h.rst:6: WARNING: c:type reference target not found: cec_event_lost_msgs
Documentation/output/cec.h.rst:6: WARNING: c:type reference target not found: cec_event_lost_msgs
Documentation/output/cec.h.rst:6: WARNING: c:type reference target not found: cec_event_state_change
Documentation/output/cec.h.rst:6: WARNING: c:type reference target not found: cec_event_lost_msgs
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Now that the uAPI is using c:type, let's use it here too.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Change the parse-headers.pl and the corresponding files to use
the C domain for enum references.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The prepare_ext_ctrls() function is actually internal to the
v4l2-ctrls.c implementation, so it doesn't have a declaration
for the kAPI header to reference it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The V4L version 1 structures had long gone from the Linux Kernel.
It doesn't make sense to use cross-references for them, as they
won't be found.
So, get rid of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
instead of declaring the uAPI structs using usual refs, e. g.:
.. _foo-struct:
Use the C domain way:
.. c:type:: foo_struct
This way, the kAPI documentation can use cross-references to
point to the uAPI symbols.
That solves about ~100 undefined warnings like:
WARNING: c:type reference target not found: foo_struct
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The typedefs and a macro are not defined. While here, improve a
few bits on the documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
There are some structs/enums that aren't documented via
kernel-doc markup. Add documentation for them.
Fix those warnings:
./include/media/rc-map.h:103: WARNING: c:type reference target not found: rc_map_list
./include/media/rc-map.h:110: WARNING: c:type reference target not found: rc_map_list
./include/media/rc-map.h:117: WARNING: c:type reference target not found: rc_map
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
There are some functions/macros used by the mediactl documentation
that are alien to the media subsystem. Ignore them.
After this patch, the media core will only complain about this
static function:
Documentation/media/kapi/mc-core.rst:97: WARNING: c:func reference target not found: media_devnode_release
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
There are several issues on the documentation:
- the media.h header were not properly referenced;
- verbatim expressions were not properly marked as such;
- struct member references were wrong;
- some notes were not using the right markup;
- a comment that were moved to the kernel-doc markup were
duplicated as a comment inside the struct media_entity;
- some args were not pointing to the struct they're using;
- macros weren't documented.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The kernel-doc parser didn't handle well the private:
tag. Rewrite it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The cross-reference to "struct media_pad" was pointing to
a place that doesn't exist. Fix it, and adjust the second
reference on the same paragraph to use the same text.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
demux.h was lacking documentation for the DMX_FE_ENTRY macro:
./drivers/media/dvb-core/demux.h:511: WARNING: c:func reference target not found: DMX_FE_ENTRY
While here, get rid of unused parameters and fix a few minor issues
at the header file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
There are a few define macros not documented, because the ReST
output was causing more warnings.
Now that this got fixed, document them. While here, fix the
remaining coding style issues.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Instead of keeping those notes at the file on a non-structured
way, move them to dtv-core.rst, using the proper ReST tags.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
There are several functions there there weren't properly
documented. Add documentation for them.
While here, make checkpatch.pl happier.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
There a some other types and functions that aren't declared
inside the media document but are elsewhere. Add them to the
ignore list.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Instead of keep using the normal reference, move to the C
domain ones. Using C domains everywhere will allow
cross-references between kAPI and uAPI docs.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Add a parser for the --debug option, in order to allow
seeing what the parser is doing.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
This patch adds DT binding documentation for STMicroelectronics hva
driver.
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Jean-Christophe Trotin <jean-christophe.trotin@st.com>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Update the cobalt EDID, fixing various incorrect values (wrong name,
product code, various video capabilities).
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Update the vivid EDID, fixing various incorrect values (wrong name,
product code, various video capabilities).
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
As warned by smatch:
drivers/media/pci/tw5864/tw5864-core.c:160 tw5864_h264_isr() error: double lock 'irqsave:flags'
drivers/media/pci/tw5864/tw5864-core.c:174 tw5864_h264_isr() error: double unlock 'irqsave:flags'
Two different spinlocks are obtained, so having two calls is correct,
but second irqsave is superfluous, and using same "flags" variable is
just wrong.
Reported-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Andrey Utkin <andrey.utkin@corp.bluecherry.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
This reverts commit 617e901a12ad ("[media] tw5864: remove double irq lock code").
That commit was rejected by Andrey Utkin <andrey_utkin@fastmail.com>,
but it had already been merged. Revert and apply Andrey's corrected
patch next.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Fix some small things:
- clean up setup function
- use MSGEND instead of 0xfe
- don't assign "return value" from cec_phys_addr to err,
it has return type void.
Signed-off-by: Johan Fjeldtvedt <jaffe1@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Replace the 'IS_ERR_VALUE(irq)' with 'ret < 0' in
function 'atmel_isc_probe'.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Songjun Wu <songjun.wu@microchip.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
This commit adds support for VIDIOC_ENUM_FRAMESIZES
and VIDIOC_ENUM_FRAMEINTERVALS enumeration ioctls.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
When the configuration is changed, they are also written to the adapter.
This allows the adapter to continue operating in autonomous mode with
the same settings when it is disconnected from the driver (typically by
going into suspend). For adapters with firmware version 2 or greater, the
settings are also persisted in EEPROM.
A new module parameter is added to optionally also use the configuration
already present in the adapter when it is connected. This option is
enabled by default.
When a new configuration is written, the autonomous mode is
automatically enabled. When the device is unconfigured, autonomous mode
is disabled.
Signed-off-by: Johan Fjeldtvedt <jaffe1@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The pulse8 dongle has some quirky behaviors when in autonomous mode.
Document these.
Signed-off-by: Johan Fjeldtvedt <jaffe1@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Make sending messages to the adapter serialized within the driver.
send_and_wait is split into send_and_wait_once, which only sends once
and checks for the result, and the higher level send_and_wait, which
performs locking and retries.
Signed-off-by: Johan Fjeldtvedt <jaffe1@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
It makes sense for adapters such as the Pulse-Eight to be configurable
both from within the driver and from user space, so remove the
requirement that drivers only can call cec_s_log_addrs or
cec_s_phys_addr if they don't expose those capabilities to user space.
Signed-off-by: Johan Fjeldtvedt <jaffe1@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The field "owner" is set by core. Thus delete an extra initialisation.
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
This patch add g/s_selection for MT8173 V4L2 Encoder.
Only output queue support g/s_selection to configure crop.
The top/left of active rectangle should always be (0,0)
Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The field "owner" is set by core. Thus delete an extra initialisation.
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
This is the driver API document, so the internal stuff is just noise here.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
It never made sense to keep these documents together; move each into its
own file.
Drop the section numbering on hsi.txt on its way to its own file.
Suggested-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The HSI subsystem documentation was split across hsi.txt and the
device-drivers docbook. Now that the latter has been converted to Sphinx,
pull in the HSI document so that it's all in one place.
Acked-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
|
|
Add yet another regex to kernel-doc to trap @param() references separately
and not produce corrupt RST markup.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
As far as I can tell, the handling of "..." arguments has never worked
right, so any documentation provided was ignored in favor of "variable
arguments." This makes kernel-doc handle "@...:" as documented. It does
*not* fix spots in kerneldoc comments that don't follow that convention,
but they are no more broken than before.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This is a trivial fix to correct upper bound addresses to always be
inclusive. Previously, the majority of ranges specified were inclusive with a
small minority specifying an exclusive upper bound. This patch fixes this
inconsistency.
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The driver that used the 'nodisconnect' parameter was removed in
commit 565bae6a4a8f ("[SCSI] 53c7xx: kill driver"). Related documentation
was cleaned up in commit f37a7238d379 ("[SCSI] 53c7xx: fix removal
fallout"), except for the remaining two mentions that are removed here.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
- The guide currently says to pad the structure to a multiple of
64-bits. This is not necessary in cases where the structure contains
no 64-bit types. Clarify this concept to avoid unnecessary padding.
- When using __u64 to hold user pointers, blindly trying to do a cast to
a void __user * may generate a warning on 32-bit systems about a cast
from an integer to a pointer of different size. There is a macro to
deal with this which hides an ugly double cast. Add a reference to
this macro.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The clock framework is generally so well supported that there's no reason
to keep this one around.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Switch from the old gpio API to the new descriptor based gpiod API.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The data may now be const as well.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
The clock may be provided by a driver which is yet to probe. Print the
actual error code as well.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
This is really configuration to the driver originating from DT or
elsewhere. Do not call it platform data.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Unify enforced 8-bit read access with that based on actual need.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
