summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-04-17wifi: mt76: mt7996: let non-bufferable MMPDUs use correct hw queueShayne Chen3-10/+12
Pass qid into mt7996_mac_write_txwi() to let the tx descriptor of non-bufferable MMPDUs be filled with correct hw queue index. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: add eht rx rate supportShayne Chen3-11/+27
Add support to report eht rx rate. Note that extended fields for eht in mt76_rx_status will make the struct size exceed the cb size, so make nss and band share the same u8. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: remove mt7996_mcu_beacon_check_caps()Ryder Lee3-124/+8
Those capabilities have been added into ieee80211_bss_conf. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7915: remove mt7915_mcu_beacon_check_caps()Ryder Lee3-110/+12
Those capabilities have been added into ieee80211_bss_conf. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: connac: refresh tx session timer for WED deviceRyder Lee1-0/+11
There's no keep-alive packet being received by mac80211 stack when WED is enabled, which leads to tx BA session timeout. This patch calls ieee80211_refresh_tx_agg_session_timer() to refresh timer according to tx status reporting. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: add missing locking to protect against concurrent rx/status callsFelix Fietkau5-3/+18
According to the documentation, ieee80211_rx_list must not run concurrently with ieee80211_tx_status (or its variants). Cc: stable@vger.kernel.org Fixes: 88046b2c9f6d ("mt76: add support for reporting tx status with skb") Reported-by: Brian Coverstone <brian@mainsequence.net> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: handle failure of vzalloc in mt7615_coredump_workKang Chen1-3/+5
vzalloc may fails, dump might be null and will cause illegal address access later. Link: https://lore.kernel.org/all/Y%2Fy5Asxw3T3m4jCw@lore-desk Fixes: d2bf7959d9c0 ("mt76: mt7663: introduce coredump support") Signed-off-by: Kang Chen <void0red@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: drop the incorrect scatter and gather framePeter Chiu2-2/+5
The scatter and gather frame may be incorrect because WED and WO may send frames to host driver interleaved. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7915: rework init flow in mt7915_thermal_init()Howard Hsu1-4/+4
If kernel do not enable CONFIG_HWMON, it may cause thermal initialization to be done with temperature value 0 and then can not transmit. This commit fixes it by setting trigger/restore temperature before checking CONFIG_HWMON. Fixes: 7d12b38ab6f6 ("wifi: mt76: mt7915: call mt7915_mcu_set_thermal_throttling() only after init_work") Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7915: add dev->hif2 support for mt7916 WED deviceSujuan Chen3-8/+16
Enable two PCIe interfaces (dev->hif2) support for mt7916 when WED is enabled. Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7915: expose device tree match tableLorenz Brun1-0/+2
On MT7986 the WiFi driver currently does not get automatically loaded, requiring manual modprobing because the device tree compatibles are not exported into metadata. Add the missing MODULE_DEVICE_TABLE macro to fix this. Fixes: 99ad32a4ca3a2 ("mt76: mt7915: add support for MT7986") Signed-off-by: Lorenz Brun <lorenz@brun.one> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: dynamic channel bandwidth changes in AP modeRyder Lee1-1/+2
Allow AP to change channel width for 40Mhz intolerant STA on the 2.4 GHz band. Signed-off-by: Himanshu Goyal <himanshu.goyal@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: fix radiotap bitfieldRyder Lee2-48/+47
The 11be generation's radiotap bitfields were wrongly copy-and-pasted from 11ax driver, so fix them accordingly. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7915: unlock on error in mt7915_thermal_temp_store()Dan Carpenter1-0/+1
Drop the lock before returning -EINVAL. Fixes: ecaccdae7a7e ("wifi: mt76: mt7915: rework mt7915_thermal_temp_store()") Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7996: Remove unneeded semicolonYang Li1-1/+1
./drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:3136:3-4: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4059 Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921: fix PCI DMA hang after rebootDeren Wu1-11/+1
mt7921 just stop some workers and clean up chip status before reboot. In stress test, there are working activities still running at the period of .shutdown callback and that would cause some hosts cannot recover DMA after reboot. To avoid the floating state in reboot, we use mt7921_pci_remove() to fully deinit all resources. Fixes: f23a0cea8bd6 ("wifi: mt76: mt7921e: add pci .shutdown() support") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: mt7921: fix wrong command to set STA channelDeren Wu1-1/+1
Should not use AND operator to check vif type NL80211_IFTYPE_MONITOR, and that will cause we go into sniffer command for both STA and MONITOR mode. However, the sniffer command would set channel properly (with some extra options), the STA mode still works even if using the wrong command. Fix vif type check to make sure we using the right command to update channel. Fixes: 914189af23b8 ("wifi: mt76: mt7921: fix channel switch fail in monitor mode") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17dt-bindings: mt76: add active-low property for ledFrank Wunderlich1-0/+5
LEDs can be in low-active mode, driver already supports it, but documentation is missing. Add documentation for the dt property. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: mt76: remove redundent MCU_UNI_CMD_* definitionsDeren Wu1-3/+0
clear redundent definitions only Fixes: 5b55b6da982c ("wifi: mt76: mt7921: add unified ROC cmd/event support") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-04-17wifi: rtw89: add support of concurrent modePo-Hao Huang1-0/+25
Add iface_combination declaration to enable concurrent mode. Only two interfaces under same frequency is supported currently. We limit the role combination to be STA + P2P or STA + AP only for now until new feature is requested. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230415035016.15788-2-pkshih@realtek.com
2023-04-17wifi: rtw89: Disallow power save with multiple stationsPo-Hao Huang1-0/+3
Power saving for more than one station is not supported currently. Disallow entering PS mode when we have more than one associated stations. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230415035016.15788-1-pkshih@realtek.com
2023-04-17wifi: rtw89: update statistics to FW for fine-tuning performancePo-Hao Huang3-1/+54
Since firmware can't have proper statistics, driver update the statistics periodically to firmware to assist in tuning performance. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230415034900.15679-5-pkshih@realtek.com
2023-04-17wifi: rtw89: use struct instead of macros to set H2C command of hardware scanPing-Ke Shih2-108/+51
Remove macros that set H2C data. Instead, use struct and le32_encode_bits() with mask definition to make it clean. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230415034900.15679-4-pkshih@realtek.com
2023-04-17wifi: rtw89: refine scan function after chanctxPo-Hao Huang6-44/+35
Since we can get the current channel definition each interface maps to, remove store_op function that is no longer required to make things simple. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230415034900.15679-3-pkshih@realtek.com
2023-04-17wifi: rtw89: prohibit enter IPS during HW scanChih-Kang Chang1-1/+2
Mac80211 core may ask driver to change to idle mode during HW scan, then H2C command for HW scan will send failed since chip is in idle mode. Therefore, We check the SCANNING flag before entering IPS to prevent this behavior. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230415034900.15679-2-pkshih@realtek.com
2023-04-17wifi: rtw89: coex: send more hardware module info to firmware for 8851BPing-Ke Shih3-107/+75
8851B has various hardware module types, so BT coexistence in firmware needs these information to make decision. Add them to make 8851B work well. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230412012831.10519-5-pkshih@realtek.com
2023-04-17wifi: rtw89: coex: Update function to get BT RSSI and hardware counterChing-Te Ku3-3/+6
Correct Bluetooth RSSI count method. The 6dB is the gap between hardware packet sampled value and real RSSI value. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230412012831.10519-4-pkshih@realtek.com
2023-04-17wifi: rtw89: coex: Add path control register to monitor listChing-Te Ku2-1/+6
Chips use similar hardware for path control, but could different path/antenna configuration. Add these register to monitor, if there are wrong settings, these register can help to debug. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230412012831.10519-3-pkshih@realtek.com
2023-04-17wifi: rtw89: coex: Enable Wi-Fi RX gain control for free run solutionChing-Te Ku2-4/+4
When Wi-Fi & Bluetooth are both busy at the same time, Wi-Fi need to enable RX gain to protect Wi-Fi RX RF ability. Without this configure the interference from Bluetooth will bring a big impact to Wi-Fi RX. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230412012831.10519-2-pkshih@realtek.com
2023-04-17wifi: rtw89: fix power save function in WoWLAN modeChih-Kang Chang4-5/+8
In WoWLAN Mode, it's expected that WiFi chip could enter power save mode only after all setting is finished, but current wow_enter_lps function break the rule and may lead to WoWLAN function fail in low probability, so fix it. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230410053438.10682-2-pkshih@realtek.com
2023-04-17wifi: rtw89: support WoWLAN mode for 8852beChin-Yen Lee3-0/+19
To support WoWLAN mode for 8852be, we add one PLE quota setting and WoWLAN stub, which shows that supported WLAN events include receiving magic packet, rekey packet and deauth packet, and disconnecting from AP. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230410053438.10682-1-pkshih@realtek.com
2023-04-17wifi: iwlwifi: move debug buffer allocation failure to info verbosityGolan Ben Ami1-1/+1
This is noising the kernel log and customers asked to hush it down. We can live with this message in "info" verbosity. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.0a7f557aa2a0.If9db474b63242b1bfaed659aa174b678ae8dc196@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: make the loop for card preparation effectiveEmmanuel Grumbach1-1/+2
Since we didn't reset t to 0, only the first iteration of the loop did checked the ready bit several times. From the second iteration and on, we just tested the bit once and continued to the next iteration. Reported-and-tested-by: Lorenzo Zolfanelli <lorenzo@zolfa.nl> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216452 Fixes: 289e5501c314 ("iwlwifi: fix the preparation of the card") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.615b683ab9c8.Ic52c3229d3345b0064fa34263293db095d88daf8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: mvm: allow number of beacons from FWJohannes Berg4-1/+13
Newer firmware images have a TLV advertising how many beacons they support, use that to permit adding more links in AP mode (FW needs to support at least as many links as beacons). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.0d7522533557.Ic6b5992e94446c35cb0f3add019defa6e7aded2a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: mvm: implement key link switchingJohannes Berg3-2/+67
Implement switching keys from one set of firmware station IDs to another set, during link switch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.c6a777dd5e47.I693f7fd7c52fe8b51a58af69d45488511367f49e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: mvm: implement BAID link switchingJohannes Berg1-10/+70
When we switch station links, also add the code to switch BAIDs from one station mask to the new one. To do so, refactor the switching code a bit to have common code for all the needed switches; will add keys next. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.40654afce24f.I0e35151f69e7513be53ddb8f008e9ab48278c352@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: mvm: track station mask for BAIDsJohannes Berg3-25/+36
When we have MLO connections, a BAID applies to multiple firmware stations. Track the station mask instead of the station ID, getting rid of a few more deflink cases and preparing for handling link switching for BAIDs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.c08523808c34.I719b7bba499648d1495ed3e3a90889d4732ef15d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: bump FW API to 77 for AX devicesGregory Greenman1-1/+1
Start supporting API version 77 for AX devices. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.e522ccefe354.If7628363fafeb7687163103e734206915c445197@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: mvm: use correct sta mask to remove queueJohannes Berg1-4/+5
When we remove a queue we need to use the currently active firmware stations in the mask, not the deflink one. Fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.01cdd2153418.I176d54f2d869f51b3707d056adb96455cf885f93@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: mvm: avoid iterating over an un-initialized listAvraham Stern2-2/+2
The initiator smooth list is initialized only in iwl_mvm_up(), but is cleared in iwl_mvm_mac_stop. This may result in iterating over the list before it was initialized in case iwl_mvm_up() failed early. Fix it by moving the list initialization to an earlier stage. Fixes: b68bd2e3143a ("iwlwifi: mvm: Add FTM initiator RTT smoothing logic") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.b50b1fe9a576.Ie348ffae110612d2e252ac120a3ba0aea063b1b6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: mvm: factor out iwl_mvm_sta_fw_id_mask()Johannes Berg3-30/+42
We are going to need this in more places than just the key code, so factor out the functionality of getting the FW station ID mask (filtered to a specific link if needed) to a separate function that can now be called both under RCU and mvm->mutex protection. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.eff92b93025d.I2c50290a0537d5db3d3460f4d57c78a4712ffb75@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: mvm: properly implement HE AP supportJohannes Berg2-3/+15
The firmware split the HE support field into HE and "pseudo HE", the latter is really for AP and doesn't implement trigger frame handling for example. Use the new field for AP mode. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.34dbfefe2a49.I0e39cd35dbe03ff9209b26733746479eae1c8966@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: mvm: Fix _iwl_mvm_get_scan_type()Ilan Peer1-2/+3
The usage of the 'dtim_period' value was wrong, as it is only a multiplier of the beacon interval, and thus, beacon interval should also be considered. Fix it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.e08293d6cace.I25f8cea3189472bd714676ca38b121d7c60fb9d9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: mvm: fix getting lowest TX rate for MLOJohannes Berg1-2/+29
In iwl_mvm_mac_ctxt_get_lowest_rate() we were still accessing vif->bss_conf without any multi-link provisions, and also the info->band, both of which isn't valid in MLO. Fix the code to look at the correct link. In case of EAPOL transmissions for the initial 4-way-HS, look up the correct link here as well, and warn if multiple are active. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.d892f68d3bcd.I7d6927abeea5c3899db225391dbc6a5c77805e80@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: call napi_synchronize() before freeing rx/tx queuesGregory Greenman4-1/+20
When rx/tx queues are being freed, on a different CPU there could be still rx flow running. Call napi_synchronize() to prevent such a race. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Co-developed-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Link: https://lore.kernel.org/r/20230416154301.5171ee44dcc1.Iff18718540da412e084e7d8266447d40730600ed@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-17wifi: iwlwifi: nvm-parse: add full BW UL MU-MIMO supportJohannes Berg1-0/+4
For some devices, in client mode, we support full bandwidth uplink multi-user MIMO. Add the necessary capability. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230416154301.88b6aac6c876.Ibf2a7a38d7a172c371c347c9d4441e8c656cefe3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14bcma: Add explicit of_device.h includeRob Herring1-0/+1
bcma/main.c uses of_dma_configure() which is declared in of_device.h. of_device.h gets implicitly included by of_platform.h, but that is going to be removed soon. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230410232701.1561613-1-robh@kernel.org
2023-04-14wifi: rtl8xxxu: Support devices with 5-6 out endpointsBitterblue Smith2-1/+3
Handle them the same way as the devices with 3-4 USB out endpoints. This is needed for the RTL8192FU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/ef4bc66d-84f5-4021-efd7-1787d097519c@gmail.com
2023-04-14wifi: rtl8xxxu: Clean up some messy ifsBitterblue Smith6-19/+30
Add some new members to rtl8xxxu_fileops and use them instead of checking priv->rtl_chip. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/e24a5534-6e33-cfb9-0634-0caf4646513f@gmail.com
2023-04-14wifi: brcmfmac: add Cypress 43439 SDIO idsMarek Vasut2-2/+12
Add SDIO ids for use with the muRata 1YN (Cypress CYW43439). The odd thing about this is that the previous 1YN populated on M.2 card for evaluation purposes had BRCM SDIO vendor ID, while the chip populated on real hardware has a Cypress one. The device ID also differs between the two devices. But they are both 43439 otherwise, so add the IDs for both. On-device 1YN (43439), the new one, chip label reads "1YN": ``` /sys/.../mmc_host/mmc2/mmc2:0001 # cat vendor device 0x04b4 0xbd3d ``` EA M.2 evaluation board 1YN (43439), the old one, chip label reads "1YN ES1.4": ``` /sys/.../mmc_host/mmc0/mmc0:0001/# cat vendor device 0x02d0 0xa9a6 ``` Reviewed-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230407203752.128539-1-marex@denx.de
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 06:01:53 +0300