summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-02-25perf: Allow perf_release() with !event->ctxPeter Zijlstra1-3/+13
In the err_file: fput(event_file) case, the event will not yet have been attached to a context. However perf_release() does assume it has been. Cure this. Tested-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dvyukov@google.com Cc: eranian@google.com Cc: oleg@redhat.com Cc: panand@redhat.com Cc: sasha.levin@oracle.com Cc: vince@deater.net Link: http://lkml.kernel.org/r/20160224174947.793996260@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-25perf: Do not double freePeter Zijlstra1-1/+6
In case of: err_file: fput(event_file), we'll end up calling perf_release() which in turn will free the event. Do not then free the event _again_. Tested-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dvyukov@google.com Cc: eranian@google.com Cc: oleg@redhat.com Cc: panand@redhat.com Cc: sasha.levin@oracle.com Cc: vince@deater.net Link: http://lkml.kernel.org/r/20160224174947.697350349@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-25perf: Close install vs. exit racePeter Zijlstra1-9/+26
Consider the following scenario: CPU0 CPU1 ctx = find_get_ctx(); perf_event_exit_task_context() mutex_lock(&ctx->mutex); perf_install_in_context(ctx, ...); /* NO-OP */ mutex_unlock(&ctx->mutex); ... perf_release() WARN_ON_ONCE(event->state != STATE_EXIT); Since the event doesn't pass through perf_remove_from_context() because perf_install_in_context() NO-OPs because the ctx is dead, and perf_event_exit_task_context() will not observe the event because its not attached yet, the event->state will not be set. Solve this by revalidating ctx->task after we acquire ctx->mutex and failing the event creation as a whole. Tested-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dvyukov@google.com Cc: eranian@google.com Cc: oleg@redhat.com Cc: panand@redhat.com Cc: sasha.levin@oracle.com Cc: vince@deater.net Link: http://lkml.kernel.org/r/20160224174947.626853419@infradead.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-25x86/entry/compat: Add missing CLAC to entry_INT80_32Andy Lutomirski1-0/+1
This doesn't seem to fix a regression -- I don't think the CLAC was ever there. I double-checked in a debugger: entries through the int80 gate do not automatically clear AC. Stable maintainers: I can provide a backport to 4.3 and earlier if needed. This needs to be backported all the way to 3.10. Reported-by: Brian Gerst <brgerst@gmail.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> # v3.10 and later Fixes: 63bcff2a307b ("x86, smap: Add STAC and CLAC instructions to control user space access") Link: http://lkml.kernel.org/r/b02b7e71ae54074be01fc171cbd4b72517055c0e.1456345086.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-25Merge tag 'perf-core-for-mingo-20160224' of ↵Ingo Molnar22-241/+1940
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements from Arnaldo Carvalho de Melo: User visible changes: - Hierarchy histogram mode for 'perf top' and 'perf report', showing multiple levels, one per --sort entry: (Namhyung Kim) On a mostly idle system: # perf top --hierarchy -s comm,dso Then expand some levels and use 'P' to take a snapshot: # cat perf.hist.0 - 92.32% perf 58.20% perf 22.29% libc-2.22.so 5.97% [kernel] 4.18% libelf-0.165.so 1.69% [unknown] - 4.71% qemu-system-x86 3.10% [kernel] 1.60% qemu-system-x86_64 (deleted) + 2.97% swapper # - Check availability of memory events in 'perf mem': (Jiri Olsa) On a Intel Broadwell machine: # perf mem record -e list ldlat-loads : available ldlat-stores: available # - Decode data_src values (e.g. perf.data files generated by 'perf mem record') in 'perf script': (Jiri Olsa) # perf script perf 693 [1] 4.088652: 1 cpu/mem-loads,ldlat=30/P: ffff88007d0b0f40 68100142 L1 hit|SNP None|TLB L1 or L2 hit|LCK No <SNIP> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - Print bpf-output events in 'perf script': (Wang Nan). # perf record -e bpf-output/no-inherit,name=evt/ -e ./test_bpf_output_3.c/map:channel.event=evt/ usleep 1000 # perf script usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms]) BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a 0008: 42 50 46 20 65 76 65 6e BPF even 0010: 74 21 00 00 t!.. BPF string: "Raise a BPF event!" # Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-25Merge branch 'linux-4.5' of git://github.com/skeggsb/linux into drm-fixesDave Airlie2-0/+16
single for for eDP panel issues on Lenovo P50 * 'linux-4.5' of git://github.com/skeggsb/linux: drm/nouveau/disp/dp: ensure sink is powered up before attempting link training
2016-02-25drm/nouveau/disp/dp: ensure sink is powered up before attempting link trainingBen Skeggs2-0/+16
This can happen under some annoying circumstances, and is a quick fix until more substantial changes can be made. Fixed eDP mode changes on (at least) the Lenovo P50. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2016-02-25drm/nouveau: platform: Fix deferred probeThierry Reding2-12/+30
The error cleanup paths aren't quite correct and will crash upon deferred probe. Cc: stable@vger.kernel.org # v4.3+ Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-02-25drivers: sh: Restore legacy clock domain on SuperH platformsGeert Uytterhoeven1-1/+1
CONFIG_ARCH_SHMOBILE is not only enabled for Renesas ARM platforms (which are DT based and multi-platform), but also on a select set of Renesas SuperH platforms (SH7722/SH7723/SH7724/SH7343/SH7366). Hence since commit 0ba58de231066e47 ("drivers: sh: Get rid of CONFIG_ARCH_SHMOBILE_MULTI"), the legacy clock domain is no longer installed on these SuperH platforms, and module clocks may not be enabled when needed, leading to driver failures. To fix this, add an additional check for CONFIG_OF. Fixes: 0ba58de231066e47 ("drivers: sh: Get rid of CONFIG_ARCH_SHMOBILE_MULTI"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-25perf top: Add --hierarchy optionNamhyung Kim2-0/+18
Support hierarchy output for perf-top using --hierarchy option. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1456326830-30456-19-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-25perf hists: Support decaying in hierarchy modeNamhyung Kim1-8/+34
In the hierarchy mode, hist entries should decay their children too. Also update hists__delete_entry() to be able to free child entries. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1456326830-30456-18-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-25perf report: Add --hierarchy optionNamhyung Kim3-0/+21
The --hierarchy option is to show output in hierarchy mode. It extends folding/unfolding in the TUI and GTK browsers to support sort items as well as callchains. Users can toggle the items to see the performance result at wanted level. $ perf report --hierarchy --tui Overhead Command / Shared Object / Symbol -------------------------------------------------- + 32.96% gnome-shell - 15.11% swapper - 14.97% [kernel.vmlinux] 6.82% [k] intel_idle 0.66% [k] menu_select 0.43% [k] __hrtimer_start_range_ns ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1456326830-30456-17-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-25perf ui/gtk: Implement hierarchy output modeNamhyung Kim1-1/+162
The hierarchy output mode is to group entries for each level so that user can see higher level picture more easily. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1456326830-30456-16-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-25perf hists browser: Align column header in hierarchy modeNamhyung Kim1-1/+70
Like in stdio, fit column header to hierarchy output. Merge column headers with "/" as a separator. Overhead Command / Shared Object / Symbol ... + 0.09% dwm + 0.06% emacs - 0.05% perf - 0.05% [kernel.vmlinux] + 0.03% [k] memcpy_orig + 0.01% [k] unmap_single_vma + 0.01% [k] smp_call_function_single + 0.00% [k] native_irq_return_iret + 0.00% [k] arch_trigger_all_cpu_backtrace_handler + 0.00% [k] native_write_msr_safe Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1456326830-30456-15-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-25perf hists browser: Implement hierarchy outputNamhyung Kim1-22/+268
Implement hierarchy mode in TUI. The output is look like stdio but it also supports to fold/unfold children dynamically. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1456326830-30456-14-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-25perf hists browser: Support collapsing/expanding whole entries in hierarchyNamhyung Kim1-10/+48
The 'C' and 'E' keys are to collapse/expand all hist entries. Update nr_hierarchy_entries properly in this case. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1456326830-30456-13-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-25perf hists browser: Count number of hierarchy entriesNamhyung Kim1-11/+74
Add nr_hierarchy_entries field to keep current number of (unfolded) hist entries. And the hist_entry->nr_rows carries number of direct children. But in the hierarchy mode, entry can have grand children and callchains. So update the number properly using hierarchy_count_rows() when toggling the folded state (by pressing ENTER key). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1456326830-30456-12-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-25perf ui/stdio: Align column header for hierarchy outputNamhyung Kim3-0/+116
The hierarchy output mode is to group entries so the existing columns won't fit to the new output. Treat all sort keys as a single column and separate headers by "/". # Overhead Command / Shared Object # ........... ................................ # 15.11% swapper 14.97% [kernel.vmlinux] 0.09% [libahci] 0.05% [iwlwifi] ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1456326830-30456-11-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-25perf ui/stdio: Implement hierarchy output modeNamhyung Kim2-1/+80
The hierarchy output mode is to group entries for each level so that user can see higher level picture more easily. It also helps to find out which component is most costly. The output will look like below: 15.11% swapper 14.97% [kernel.vmlinux] 0.09% [libahci] 0.05% [iwlwifi] 10.29% irq/33-iwlwifi 6.45% [kernel.vmlinux] 1.41% [mac80211] 1.15% [iwldvm] 1.14% [iwlwifi] 0.14% [cfg80211] 4.81% firefox 3.92% libxul.so 0.34% [kernel.vmlinux] Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1456326830-30456-10-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-25perf hists: Count number of sort keysNamhyung Kim2-0/+4
It'll be used for hierarchy output mode to indent entries properly. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1456326830-30456-9-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-25perf hists: Resort after filtering hierarchyNamhyung Kim1-0/+54
In hierarchy mode, a filter can affect periods of entries in upper hierarchy. So it needs to resort the hists after filter. For example, let's look at following example: Overhead Command / Shared Object / Symbol ------------ -------------------------------- 30.00% perf 20.00% perf 10.00% main 5.00% pr_debug 5.00% memcpy 10.00% [kernel.vmlinux] 8.00% memset 2.00% cpu_idle If we apply simbol filter for 'mem' it should look like this 13.00% perf 8.00% [kernel.vmlinux] 8.00% memset 5.00% perf 5.00% memcpy Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1456326830-30456-8-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-25perf hists: Support filtering in hierarchy modeNamhyung Kim1-8/+93
The hists__filter_hierarchy() function implements filtering in hierarchy mode. Now we have hist_entry__filter() so use it for entries in the hierarchy. It returns 3 kind of values. A negative value means that it's not filtered by this type. It marks current entry as filtered tentatively so if a lower level entry removes the filter it also removes the all parent so that we can find the entry in the output. Zero means it's filtered out by this type. A positive value means it's not filtered so it removes the filter and shows in the output. In these cases, it moves to next entry since lower level entry won't match by this type of filter anymore. Thus all children will be filtered or not together. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1456326830-30456-7-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-25perf hists: Introduce hist_entry__filter()Namhyung Kim3-0/+116
The hist_entry__filter() function is to filter hist entries using sort key related info. This is needed to support hierarchy mode since each hist entry will be associated with a hpp fmt which has a sort key. So each entry should compare to only matching type of filters. To do that, add the ->se_filter callback field to struct sort_entry. This callback takes 'type' argument which determines whether it's matching sort key or not. It returns -1 for non-matching type, 0 for filtered entry and 1 for not filtered entries. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1456326830-30456-6-git-send-email-namhyung@kernel.org [ 'socket' is reserved in sys/socket.h, so replace it with 'sk' ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-25Merge tag 'drm-intel-fixes-2016-02-22' of ↵Dave Airlie13-93/+367
git://anongit.freedesktop.org/drm-intel into drm-fixes This is a bit large, but it really helps Skylake bugs we are seeing on a number of laptops. Most of the commits are quite similar, ensuring the display power doesn't vanish under us during hardware access. Also do note that it's not just Skylake that's affected. * tag 'drm-intel-fixes-2016-02-22' of git://anongit.freedesktop.org/drm-intel: drm/i915/gen9: Verify and enforce dc6 state writes drm/i915/gen9: Check for DC state mismatch drm/i915/skl: Ensure HW is powered during DDB HW state readout drm/i915/lvds: Ensure the HW is powered during HW state readout drm/i915/hdmi: Ensure the HW is powered during HW state readout drm/i915/dsi: Ensure the HW is powered during HW state readout drm/i915/dp: Ensure the HW is powered during HW state readout drm/i915: Ensure the HW is powered when accessing the CRC HW block drm/i915/ddi: Ensure the HW is powered during HW state readout drm/i915/crt: Ensure the HW is powered during HW state readout drm/i915: Ensure the HW is powered during HW access in assert_pipe drm/i915: Ensure the HW is powered when disabling VGA drm/i915/ibx: Ensure the HW is powered during PLL HW readout drm/i915: Ensure the HW is powered during display pipe HW readout drm/i915: Add helper to get a display power ref if it was already enabled
2016-02-25Merge branch 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie7-16/+62
into drm-fixes A few radeon and amdgpu fixes for 4.5. A few further fixes for the vblank regressions in 4.4 and a couple of other minor fixes. * 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: disable direct VM updates when vm_debug is set amdgpu: fix NULL pointer dereference at tonga_check_states_equal drm/radeon/pm: adjust display configuration after powerstate drm/amdgpu/pm: adjust display configuration after powerstate drm/amdgpu/pm: add some checks for PX drm/amdgpu: fix locking in force performance level drm/amdgpu/gfx8: fix priv reg interrupt enable drm/amdgpu: Don't hang in amdgpu_flip_work_func on disabled crtc. drm/radeon: Don't hang in radeon_flip_work_func on disabled crtc. (v2)
2016-02-25Merge tag 'arc-4.5-rc6-fixes-upd' of ↵Linus Torvalds20-163/+134
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - Fix for csd deadlock due to missing self IPI - Accompanying IPI cleanups / optimization - Brown paper bag bug in one of the cleanups above - Boot reporting updates for new hardware features - Don't force DEVTMPFS if INITRAMFS * tag 'arc-4.5-rc6-fixes-upd' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: arc: SMP: CONFIG_ARC_IPI_DBG cleanup ARC: SMP: No need for CONFIG_ARC_IPI_DBG ARCv2: Elide sending new cross core intr if receiver didn't ack prev ARCv2: SMP: Push IPI_IRQ into IPI provider ARC: [intc-compact] Remove IPI setup from ARCompact port ARCv2: SMP: Emulate IPI to self using software triggered interrupt arc: get rid of DEVTMPFS dependency on INITRAMFS_SOURCE ARCv2: boot report CCMs (Closely Coupled Memories) ARCv2: boot print Low Latency Memory ARC: Assume multiplier is always present
2016-02-25Merge branch 'for-linus' of ↵Linus Torvalds4-9/+14
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "Assorted fixes - xattr one from this cycle, the rest - stable fodder" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs/pnode.c: treat zero mnt_group_id-s as unequal affs_do_readpage_ofs(): just use kmap_atomic() around memcpy() xattr handlers: plug a lock leak in simple_xattr_list fs: allow no_seek_end_llseek to actually seek
2016-02-24perf hists: Add helper functions for hierarchy modeNamhyung Kim2-0/+72
The rb_hierarchy_{next,prev,last} functions are to traverse all hist entries in a hierarchy. They will be used by various function which supports hierarchy output. As the rb_hierarchy_next() is used to traverse the whole hierarchy, it sometime needs to visit entries regardless of current folding state. So add enum hierarchy_move_dir and pass it to __rb_hierarchy_next() for those cases. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1456326830-30456-5-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24perf hists: Resort hist entries with hierarchyNamhyung Kim1-3/+91
For hierarchical output, each entry must be sorted in their rbtree (hroot) properly. Add hists__hierarchy_output_resort() to do the job. Note that those hierarchy entries share the period counts, it'd be important to update the hists->stats only once (for leaves). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1456326830-30456-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24libceph: don't spam dmesg with stray reply warningsIlya Dryomov1-2/+2
Commit d15f9d694b77 ("libceph: check data_len in ->alloc_msg()") mistakenly bumped the log level on the "tid %llu unknown, skipping" message. Turn it back into a dout() - stray replies are perfectly normal when OSDs flap, crash, get killed for testing purposes, etc. Cc: stable@vger.kernel.org # 4.3+ Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
2016-02-24libceph: use the right footer size when skipping a messageIlya Dryomov1-2/+9
ceph_msg_footer is 21 bytes long, while ceph_msg_footer_old is only 13. Don't skip too much when CEPH_FEATURE_MSG_AUTH isn't negotiated. Cc: stable@vger.kernel.org # 3.19+ Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
2016-02-24libceph: don't bail early from try_read() when skipping a messageIlya Dryomov1-2/+2
The contract between try_read() and try_write() is that when called each processes as much data as possible. When instructed by osd_client to skip a message, try_read() is violating this contract by returning after receiving and discarding a single message instead of checking for more. try_write() then gets a chance to write out more requests, generating more replies/skips for try_read() to handle, forcing the messenger into a starvation loop. Cc: stable@vger.kernel.org # 3.10+ Reported-by: Varada Kari <Varada.Kari@sandisk.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Tested-by: Varada Kari <Varada.Kari@sandisk.com> Reviewed-by: Alex Elder <elder@linaro.org>
2016-02-24thp: call pmdp_invalidate() with correct virtual addressKirill A. Shutemov1-4/+5
Sebastian Ott and Gerald Schaefer reported random crashes on s390. It was bisected to my THP refcounting patchset. The problem is that pmdp_invalidated() called with wrong virtual address. It got offset up by HPAGE_PMD_SIZE by loop over ptes. The solution is to introduce new variable to be used in loop and don't touch 'haddr'. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-and-tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reported-and-tested-by Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-24drm/amdgpu: disable direct VM updates when vm_debug is setChristian König1-1/+2
That should make user space bugs more obvious. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-24amdgpu: fix NULL pointer dereference at tonga_check_states_equalBradley Pankow1-2/+2
The event_data passed from pem_fini was not cleared upon initialization. This caused NULL checks to pass and cast_const_phw_tonga_power_state to attempt to dereference an invalid pointer. Clear the event_data in pem_init and pem_fini before calling pem_handle_event. Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Bradley Pankow <btpankow@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-24arm64: KVM: vgic-v3: Restore ICH_APR0Rn_EL2 before ICH_APR1Rn_EL2Marc Zyngier1-10/+10
The GICv3 architecture spec says: Writing to the active priority registers in any order other than the following order will result in UNPREDICTABLE behavior: - ICH_AP0R<n>_EL2. - ICH_AP1R<n>_EL2. So let's not pointlessly go against the rule... Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-24Merge tag 'fixes-for-v4.5-rc6' of ↵Greg Kroah-Hartman14-68/+108
http://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.5-rc6 The most important fixes here are: a) yet another fix to dwc3's EP transfer resource assignment logic. This time around we will be pre-allocating transfer resources to avoid any future issues; b) two DMA fixes for the old MUSB driver. c) dwc2's data toggle fix for FS Other than these, we have a few other minor fixes elsewhere.
2016-02-24Merge tag 'renesas-soc-fixes-for-v4.5' of ↵Olof Johansson6-23/+19
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Renesas ARM Based SoC Fixes for v4.5 * Avoid writing to .text * tag 'renesas-soc-fixes-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: Remove shmobile_boot_arg ARM: shmobile: Move shmobile_smp_{mpidr, fn, arg}[] from .text to .bss ARM: shmobile: r8a7779: Remove remainings of removed SCU boot setup code ARM: shmobile: Move shmobile_scu_base from .text to .bss Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-24perf hists: Basic support of hierarchical report viewNamhyung Kim3-2/+128
In the hierarchical view, entries will be grouped and sorted on the first key, and then on the second key, and so on. Add the he->hroot_{in,out} fields to keep the lower level entries. Actually this can share space, in a union, with callchain's 'sorted_root' since the hroots are only used by non-leaf entries and callchain is only used by leaf entries. It also adds the 'parent_he' and 'depth' fields which can be used by browsers. This patch only implements collapsing part which creates internal entries for each sort key. These need to be sorted by output_sort stage and to be displayed properly in the later patch(es). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1456326830-30456-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24perf tools: Add helper functions for some sort keysNamhyung Kim2-0/+36
The 'trace', 'srcline' and 'srcfile' sort keys updates hist entry's field later. With the hierarchy mode, those fields are passed to a matching entry so it needs to identify the sort keys. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1456326830-30456-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24perf script: Print bpf-output events in 'perf script'Wang Nan1-5/+88
This patch allows 'perf script' output messages from BPF program. For example, use test_bpf_output_3.c at the end of this commit message, # ./perf record -e bpf-output/no-inherit,name=evt/ \ -e ./test_bpf_output_3.c/map:channel.event=evt/ \ usleep 100000 # ./perf script usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms]) BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a 0008: 42 50 46 20 65 76 65 6e BPF even 0010: 74 21 00 00 t!.. BPF string: "Raise a BPF event!" usleep 4882 21384.632606: evt: ffffffff8105c609 kretprobe_trampoline_holder ([kernel.kallsyms BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a 0008: 42 50 46 20 65 76 65 6e BPF even 0010: 74 21 00 00 t!.. BPF string: "Raise a BPF event!" Two samples from BPF output are printed by both binary and string format. If BPF program output something unprintable, string format is suppressed. /************************ BEGIN **************************/ #include <uapi/linux/bpf.h> struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; #define SEC(NAME) __attribute__((section(NAME), used)) static u64 (*ktime_get_ns)(void) = (void *)BPF_FUNC_ktime_get_ns; static int (*trace_printk)(const char *fmt, int fmt_size, ...) = (void *)BPF_FUNC_trace_printk; static int (*get_smp_processor_id)(void) = (void *)BPF_FUNC_get_smp_processor_id; static int (*perf_event_output)(void *, struct bpf_map_def *, int, void *, unsigned long) = (void *)BPF_FUNC_perf_event_output; struct bpf_map_def SEC("maps") channel = { .type = BPF_MAP_TYPE_PERF_EVENT_ARRAY, .key_size = sizeof(int), .value_size = sizeof(u32), .max_entries = __NR_CPUS__, }; static inline int __attribute__((always_inline)) func(void *ctx, int type) { char output_str[] = "Raise a BPF event!"; perf_event_output(ctx, &channel, get_smp_processor_id(), &output_str, sizeof(output_str)); return 0; } SEC("func_begin=sys_nanosleep") int func_begin(void *ctx) {return func(ctx, 1);} SEC("func_end=sys_nanosleep%return") int func_end(void *ctx) { return func(ctx, 2);} char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; /************************* END ***************************/ Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1456312845-111583-3-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24perf tools: Make binary data printer code in trace_event public availableWang Nan3-27/+105
Move code printing binray data from trace_event() to utils.c and allows passing different printer. Further commits will use this logic to print bpf output event. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1456312845-111583-2-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24tracing: Fix showing function event in available_eventsSteven Rostedt (Red Hat)1-1/+2
The ftrace:function event is only displayed for parsing the function tracer data. It is not used to enable function tracing, and does not include an "enable" file in its event directory. Originally, this event was kept separate from other events because it did not have a ->reg parameter. But perf added a "reg" parameter for its use which caused issues, because it made the event available to functions where it was not compatible for. Commit 9b63776fa3ca9 "tracing: Do not enable function event with enable" added a TRACE_EVENT_FL_IGNORE_ENABLE flag that prevented the function event from being enabled by normal trace events. But this commit missed keeping the function event from being displayed by the "available_events" directory, which is used to show what events can be enabled by set_event. One documented way to enable all events is to: cat available_events > set_event But because the function event is displayed in the available_events, this now causes an INVALID error: cat: write error: Invalid argument Reported-by: Chunyu Hu <chuhu@redhat.com> Fixes: 9b63776fa3ca9 "tracing: Do not enable function event with enable" Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-02-24KVM: async_pf: do not warn on page allocation failuresChristian Borntraeger1-1/+1
In async_pf we try to allocate with NOWAIT to get an element quickly or fail. This code also handle failures gracefully. Lets silence potential page allocation failures under load. qemu-system-s39: page allocation failure: order:0,mode:0x2200000 [...] Call Trace: ([<00000000001146b8>] show_trace+0xf8/0x148) [<000000000011476a>] show_stack+0x62/0xe8 [<00000000004a36b8>] dump_stack+0x70/0x98 [<0000000000272c3a>] warn_alloc_failed+0xd2/0x148 [<000000000027709e>] __alloc_pages_nodemask+0x94e/0xb38 [<00000000002cd36a>] new_slab+0x382/0x400 [<00000000002cf7ac>] ___slab_alloc.constprop.30+0x2dc/0x378 [<00000000002d03d0>] kmem_cache_alloc+0x160/0x1d0 [<0000000000133db4>] kvm_setup_async_pf+0x6c/0x198 [<000000000013dee8>] kvm_arch_vcpu_ioctl_run+0xd48/0xd58 [<000000000012fcaa>] kvm_vcpu_ioctl+0x372/0x690 [<00000000002f66f6>] do_vfs_ioctl+0x3be/0x510 [<00000000002f68ec>] SyS_ioctl+0xa4/0xb8 [<0000000000781c5e>] system_call+0xd6/0x264 [<000003ffa24fa06a>] 0x3ffa24fa06a Cc: stable@vger.kernel.org Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-24KVM: x86: fix conversion of addresses to linear in 32-bit protected modePaolo Bonzini1-2/+2
Commit e8dd2d2d641c ("Silence compiler warning in arch/x86/kvm/emulate.c", 2015-09-06) broke boot of the Hurd. The bug is that the "default:" case actually could modify "la", but after the patch this change is not reflected in *linear. The bug is visible whenever a non-zero segment base causes the linear address to wrap around the 4GB mark. Fixes: e8dd2d2d641cb2724ee10e76c0ad02e04289c017 Cc: stable@vger.kernel.org Reported-by: Aurelien Jarno <aurelien@aurel32.net> Tested-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-24KVM: x86: fix missed hardware breakpointsPaolo Bonzini1-0/+1
Sometimes when setting a breakpoint a process doesn't stop on it. This is because the debug registers are not loaded correctly on VCPU load. The following simple reproducer from Oleg Nesterov tries using debug registers in two threads. To see the bug, run a 2-VCPU guest with "taskset -c 0" and run "./bp 0 1" inside the guest. #include <unistd.h> #include <signal.h> #include <stdlib.h> #include <stdio.h> #include <sys/wait.h> #include <sys/ptrace.h> #include <sys/user.h> #include <asm/debugreg.h> #include <assert.h> #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) unsigned long encode_dr7(int drnum, int enable, unsigned int type, unsigned int len) { unsigned long dr7; dr7 = ((len | type) & 0xf) << (DR_CONTROL_SHIFT + drnum * DR_CONTROL_SIZE); if (enable) dr7 |= (DR_GLOBAL_ENABLE << (drnum * DR_ENABLE_SIZE)); return dr7; } int write_dr(int pid, int dr, unsigned long val) { return ptrace(PTRACE_POKEUSER, pid, offsetof (struct user, u_debugreg[dr]), val); } void set_bp(pid_t pid, void *addr) { unsigned long dr7; assert(write_dr(pid, 0, (long)addr) == 0); dr7 = encode_dr7(0, 1, DR_RW_EXECUTE, DR_LEN_1); assert(write_dr(pid, 7, dr7) == 0); } void *get_rip(int pid) { return (void*)ptrace(PTRACE_PEEKUSER, pid, offsetof(struct user, regs.rip), 0); } void test(int nr) { void *bp_addr = &&label + nr, *bp_hit; int pid; printf("test bp %d\n", nr); assert(nr < 16); // see 16 asm nops below pid = fork(); if (!pid) { assert(ptrace(PTRACE_TRACEME, 0,0,0) == 0); kill(getpid(), SIGSTOP); for (;;) { label: asm ( "nop; nop; nop; nop;" "nop; nop; nop; nop;" "nop; nop; nop; nop;" "nop; nop; nop; nop;" ); } } assert(pid == wait(NULL)); set_bp(pid, bp_addr); for (;;) { assert(ptrace(PTRACE_CONT, pid, 0, 0) == 0); assert(pid == wait(NULL)); bp_hit = get_rip(pid); if (bp_hit != bp_addr) fprintf(stderr, "ERR!! hit wrong bp %ld != %d\n", bp_hit - &&label, nr); } } int main(int argc, const char *argv[]) { while (--argc) { int nr = atoi(*++argv); if (!fork()) test(nr); } while (wait(NULL) > 0) ; return 0; } Cc: stable@vger.kernel.org Suggested-by: Nadav Amit <namit@cs.technion.ac.il> Reported-by: Andrey Wagin <avagin@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-24perf script: Display data_src valuesJiri Olsa3-1/+36
Adding support to display data_src values, for events with data_src data in sample. Example: $ perf script ... rcuos/3 32 [002] ... 68501042 Local RAM hit|SNP None or Hit|TLB L1 or L2 hit|LCK No ... rcuos/3 32 [002] ... 68100142 L1 hit|SNP None|TLB L1 or L2 hit|LCK No ... swapper 0 [002] ... 68100242 LFB hit|SNP None|TLB L1 or L2 hit|LCK No ... swapper 0 [000] ... 68100142 L1 hit|SNP None|TLB L1 or L2 hit|LCK No ... swapper 0 [000] ... 50100142 L1 hit|SNP None|TLB L2 miss|LCK No ... rcuos/3 32 [002] ... 68100142 L1 hit|SNP None|TLB L1 or L2 hit|LCK No ... plugin-containe 16538 [000] ... 6a100142 L1 hit|SNP None|TLB L1 or L2 hit|LCK Yes ... gkrellm 1736 [000] ... 68100242 LFB hit|SNP None|TLB L1 or L2 hit|LCK No ... gkrellm 1736 [000] ... 6a100142 L1 hit|SNP None|TLB L1 or L2 hit|LCK Yes ... ^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ data_src value data_src translation Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1456303616-26926-14-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24perf tools: Change perf_mem__lck_scnprintf to return nb of displayed bytesJiri Olsa2-6/+8
Moving strncat call into scnprintf to easily track number of displayed bytes. It will be used in following patch. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1456303616-26926-13-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24perf tools: Change perf_mem__snp_scnprintf to return nb of displayed bytesJiri Olsa2-5/+6
Moving strncat/strcpy calls into scnprintf to easily track number of displayed bytes. It will be used in following patch. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1456303616-26926-12-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24perf tools: Change perf_mem__lvl_scnprintf to return nb of displayed bytesJiri Olsa2-7/+8
Moving strncat/strcpy calls into scnprintf to easily track number of displayed bytes. It will be used in following patch. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1456303616-26926-11-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 08:21:28 +0300