summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-03-22selftests/bpf: bpf tunnel encap testWillem de Bruijn3-1/+160
Validate basic tunnel encapsulation using ipip. Set up two namespaces connected by veth. Connect a client and server. Do this with and without bpf encap. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-22bpf: in bpf_skb_adjust_room avoid copy in tx fast pathWillem de Bruijn1-1/+1
bpf_skb_adjust_room calls skb_cow on grow. This expensive operation can be avoided in the fast path when the only other clone has released the header. This is the common case for TCP, where one headerless clone is kept on the retransmit queue. It is safe to do so even when touching the gso fields in skb_shinfo. Regular tunnel encap with iptunnel_handle_offloads takes the same optimization. The tcp stack unclones in the unlikely case that it accesses these fields through headerless clones packets on the retransmit queue (see __tcp_retransmit_skb). If any other clones are present, e.g., from packet sockets, skb_cow_head returns the same value as skb_cow(). Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-22net/mlx5e: Replace TC VLAN pop and push actions with VLAN modifyEli Britstein1-1/+11
Changing the VLAN header may be implemented by pop the existing header and push a new one. Translate those operations as VLAN modify. Applicable for use cases such as OVS where the controller translates a vlan modify meta (OF) rule to DP pop+push actions rule. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net/mlx5e: Support VLAN modify actionEli Britstein1-2/+49
Support VLAN modify action by emulating a rewrite action for the VLAN fields. Currently, the only supported field is the vid. The prio in the action must be set to 0 to indicate no change. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net/mlx5e: Add VLAN ID rewrite fieldsEli Britstein2-0/+3
Add VLAN ID rewrite fields as a pre-step to support this rewrite. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net: Add IANA_VXLAN_UDP_PORT definition to vxlan header fileMoshe Shemesh6-8/+9
Added IANA_VXLAN_UDP_PORT (4789) definition to vxlan header file so it can be used by drivers instead of local definition. Updated drivers which locally defined it as 4789 to use it. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Cc: John Hurley <john.hurley@netronome.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Yunsheng Lin <linyunsheng@huawei.com> Cc: Peng Li <lipeng321@huawei.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net/mlx5e: TX, Add geneve tunnel stateless offload supportMoshe Shemesh4-3/+77
Currently support only default geneve udp port (6081). For the tx side, the HW is assisted by SW parsing, which sets the headers offset to offload tunneled LSO and csum. Note that for udp tunnels, we don't use special rx offloads, as rss on the outer headers is enough, we support checksum complete and GRO takes care of aggregation. Geneve TSO BW and CPU load results (tested using iperf single tcp stream). In this patch we add TSO support over Geneve, so the "before" result doesn't actually get to using the TSO HW offload even when turned on. Tested on ConnectX-5, Intel(R) Xeon(R) CPU E5-2660 v2 @2.20GHz. __________________________________ | Before | After | |________________|_________________| | 12.6 Gbits/sec | 21.7 Gbits/sec | | 100% CPU load | 61.5% CPU load | |________________|_________________| Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net/mlx5e: Take SW parser code to a separate functionMoshe Shemesh2-24/+53
Refactor mlx5e_ipsec_set_swp() code, split the part which sets the eseg software parser (SWP) offsets and flags, so it can be used in a downstream patch by other mlx5e functionality which needs to set eseg SWP. The new function mlx5e_set_eseg_swp() is useful for setting swp for both outer and inner headers. It also handles the special ipsec case of xfrm mode transfer. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net: Move the definition of the default Geneve udp port to public header fileMoshe Shemesh5-5/+4
Move the definition of the default Geneve udp port from the geneve source to the header file, so we can re-use it from drivers. Modify existing drivers to use it. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Cc: John Hurley <john.hurley@netronome.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net/mlx5e: Remove redundant assignmentGustavo A. R. Silva1-4/+2
Remove redundant assignment to tun_entropy->enabled. Addesses-Coverity-ID: 1477328 ("Unused value") Fixes: 97417f6182f8 ("net/mlx5e: Fix GRE key by controlling port tunnel entropy calculation") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net/mlx5e: Fix compilation warning in en_tc.cSaeed Mahameed2-2/+3
Amazingly a mlx5e_tc function is being called from the eswitch layer, which is by itself very terrible! The function was declared locally in eswitch_offloads.c so it could be used there, which caused the following compilation warning, fix that. drivers/.../mlx5/core/en_tc.c:3242:6: [-Werror=missing-prototypes] error: no previous prototype for ‘mlx5e_tc_clean_fdb_peer_flows’ Fixes: 04de7dda7394 ("net/mlx5e: Infrastructure for duplicated offloading of TC flows") Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net/mlx5e: Fix port buffer function documentation formatSaeed Mahameed1-15/+15
This patch fixes compiler warnings: In drivers/.../mlx5/core/en/port_buffer.c:190: warning: Function parameter or member 'pfc_en' not described... ... warning: Function parameter or member 'change' not described... Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration") Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net/mlx5: Fix compilation warning in eq.cSaeed Mahameed1-4/+2
mlx5_eq_table_get_rmap is being used only when CONFIG_RFS_ACCEL is enabled, this patch fixes the below warning when CONFIG_RFS_ACCEL is disabled. drivers/.../mlx5/core/eq.c:903:18: [-Werror=missing-prototypes] error: no previous prototype for ‘mlx5_eq_table_get_rmap’ Fixes: f2f3df550139 ("net/mlx5: EQ, Privatize eq_table and friends") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net/mlx5: Simplify mlx5_sriov_is_enabled() by using pci core APIParav Pandit2-8/+5
It is desired to get rid of num_vfs stored inside mlx5_core_sriov to safely support vports more than vfs. To reduce dependency on mlx5_core_sriov num_vfs, start using pci_num_vf() from pci core. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net/mlx5: Rename total_vfs to total_vportsParav Pandit1-2/+2
Macro MLX5_TOTAL_VPORTS() returns total number of vports. Therefore, rename variable total_vfs to total_vports to improve code readability. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22net/mlx5: Simplify sriov enable/disable flowParav Pandit1-36/+8
Simplify sriov enable/disable flow for below two checks. 1. PCI core driver allows sriov configuration only on a PF. This is done in drivers/pci/pci-sysfs.c sriov_attrs_are_visible(). 2. PCI core driver allow sriov enablement if the sriov is currently disabled for for a PF. This is done in drivers/pci/pci-sysfs.c sriov_numvfs_store(). Hence there is no need for mlx5 driver to duplicate such checks. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-22Merge tag 'devprop-5.1-rc2' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework fix from Rafael Wysocki: "Add missing 'static' in two places (YueHaibing)" * tag 'devprop-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: drivers: base: swnode: Make two functions static
2019-03-22Merge tag 'acpi-5.1-rc2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Prevent device references acquired by bus_find_device() in acpi_dev_present() from being leaked (Andy Shevchenko)" * tag 'acpi-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / utils: Drop reference in test for device presence
2019-03-22Merge tag 'pm-5.1-rc2' of ↵Linus Torvalds2-7/+9
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These rearrange some code in the generic power domains (genpd) framework to avoid a potential deadlock and make the turbostat utility behave more as expected. Specifics: - Rearrange the generic power domains (genpd) code to avoid a potential deadlock possible due to its interactions with the clock framework (Jiada Wang) - Make turbostat return the exit status of the command run under it if that command fails (David Arcari)" * tag 'pm-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / Domains: Avoid a potential deadlock tools/power turbostat: return the exit status of a command
2019-03-22Merge tag 'mmc-v5.1-rc1' of ↵Linus Torvalds6-21/+35
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "A couple of MMC host fixes intended for v5.1: - alcor: Fix DMA reads - renesas_sdhi: Limit block count to 16-bit for old revisions - sdhci-omap: Fixup support for read-only pins - mxcmmc: Revert support for highmem pages - davinci/pxamci: Fix clang build warnings" * tag 'mmc-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: renesas_sdhi: limit block count to 16 bit for old revisions mmc: alcor: fix DMA reads mmc: sdhci-omap: Set caps2 to indicate no physical write protect pin mmc: mxcmmc: "Revert mmc: mxcmmc: handle highmem pages" mmc: davinci: remove extraneous __init annotation mmc: pxamci: fix enum type confusion
2019-03-22sbitmap: trivial - update comment for sbitmap_deferred_clear_bitShenghui Wang1-1/+1
"sbitmap_batch_clear" should be "sbitmap_deferred_clear" Acked-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Shenghui Wang <shhuiw@foxmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-22Merge branch 'x86/cpu' into x86/urgentThomas Gleixner1-16/+15
Merge the forgotten cleanup patch for the new file, so the mess does not propagate further.
2019-03-22x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return ↵Nathan Chancellor1-0/+1
an error When building with -Wsometimes-uninitialized, Clang warns: arch/x86/kernel/hw_breakpoint.c:355:2: warning: variable 'align' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] The default cannot be reached because arch_build_bp_info() initializes hw->len to one of the specified cases. Nevertheless the warning is valid and returning -EINVAL makes sure that this cannot be broken by future modifications. Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: clang-built-linux@googlegroups.com Link: https://github.com/ClangBuiltLinux/linux/issues/392 Link: https://lkml.kernel.org/r/20190307212756.4648-1-natechancellor@gmail.com
2019-03-22ice: Get VF VSI instances directly via PFAkeem G Abodunrin1-8/+27
This patch changes how we get VF VSIs instances. Instead of relying on mailbox virtual channel message to retrieve VSI, it is more reliable getting it directly via VF object in PF data structure. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: Don't let VF know that it is untrustedAkeem G Abodunrin1-4/+8
Don't let the VF know it's not trusted when it tries to add more than permitted additional MAC addresses. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: Set LAN_EN for all directional rulesYashaswini Raghuram Prathivadi Bhayankaram1-3/+9
The LAN_EN bit for a switch rule determines if the packet can go out on the wire or not. Set the LAN_EN flag in the switch action for all directional rules. Signed-off-by: Yashaswini Raghuram Prathivadi Bhayankaram <yashaswini.raghuram.prathivadi.bhayankaram@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: Do not set LB_EN for prune switch rulesChristopher N Bednarz1-1/+6
LB_EN for prune switch rules was causing all TX traffic to loopback to the internal switch and dropped. When running bi-directional stress workloads with RDMA the RDPU would hang blocking tx and rx traffic. Signed-off-by: Christopher N Bednarz <christopher.n.bednarz@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: Enable LAN_EN for the right recipesYashaswini Raghuram Prathivadi Bhayankaram1-9/+20
In VEB mode, enable LAN_EN bit in the action fields for filter rules corresponding to the right recipes. Signed-off-by: Yashaswini Raghuram Prathivadi Bhayankaram <yashaswini.raghuram.prathivadi.bhayankaram@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: Add support for PF/VF promiscuous modeAkeem G Abodunrin7-31/+527
Implement support for VF promiscuous mode, MAC/VLAN/MAC_VLAN and PF multicast MAC/VLAN/MAC_VLAN promiscuous mode. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: code cleanup in ice_sched.cVictor Raj1-8/+9
This patch does some clean up in the Tx scheduler code: 1. Adjust the stack variable usage 2. Modify the debug prints to display the FW error 3. Add additional debug prints while adding/removing VSIs Signed-off-by: Victor Raj <victor.raj@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: Remove unused vsi_id fieldAnirudh Venkataramanan1-1/+0
Remove unused vsi_id field from struct ice_sched_vsi_info. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: fix some function prototype and signature style issuesBruce Allan11-87/+108
Put the return type on a separate line for function prototypes and signatures that would exceed the 80-character limit if both were on the same line. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: fix the divide by zero issueKiran Patil1-1/+12
Static analysis flagged a potential divide by zero error because vsi->num_rxq can become zero in certain condition and it is used as divisor. Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: Fix issue reconfiguring VF queuesAkeem G Abodunrin3-16/+76
When VF requested for queues changes, we need to update LAN Tx queue with correct number of VF queue pairs and re-allocate VF resources based on this new requested number of queues, which is constraint within maximum queue supported per VF. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: Remove unused function prototypeAnirudh Venkataramanan1-10/+0
Commit 7c710869d64e ("ice: Add handlers for VF netdevice operations") seems to have inadvertently introduced a function prototype for ice_set_vf_bw that isn't implemented. Remove it. Fixes: 7c710869d64e ("ice: Add handlers for VF netdevice operations") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: fix static analysis warningsBruce Allan4-4/+4
cppcheck warns "Identical condition '<var>', second condition is always false". Fix them. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: Fix issue reclaiming resources back to the pool after resetAkeem G Abodunrin1-3/+23
This patch fixes issue reclaiming VF resources back to the pool after reset - Since we only allocate HW vector for all VFs and track together with resources allocation for PF with ice_search_res, we need to free VFs resources separately, using first VF vector index to traverse the list. Otherwise tracker starts from the last assigned vectors list and causes maximum supported number of HW vectors, 1024 to be exhausted, depending on the number of VFs enabled, which causes a lot of unwanted issues, and failed to reassign vectors for VFs. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22ice: Enable MAC anti-spoof by defaultAkeem G Abodunrin1-0/+9
This patch enables MAC anti-spoof by default, with creation of VF VSIs or when the VF VSIs are being re-initialized. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-22genetlink: make policy common to familyJohannes Berg36-374/+68
Since maxattr is common, the policy can't really differ sanely, so make it common as well. The only user that did in fact manage to make a non-common policy is taskstats, which has to be really careful about it (since it's still using a common maxattr!). This is no longer supported, but we can fake it using pre_doit. This reduces the size of e.g. nl80211.o (which has lots of commands): text data bss dec hex filename 398745 14323 2240 415308 6564c net/wireless/nl80211.o (before) 397913 14331 2240 414484 65314 net/wireless/nl80211.o (after) -------------------------------- -832 +8 0 -824 Which is obviously just 8 bytes for each command, and an added 8 bytes for the new policy pointer. I'm not sure why the ops list is counted as .text though. Most of the code transformations were done using the following spatch: @ops@ identifier OPS; expression POLICY; @@ struct genl_ops OPS[] = { ..., { - .policy = POLICY, }, ... }; @@ identifier ops.OPS; expression ops.POLICY; identifier fam; expression M; @@ struct genl_family fam = { .ops = OPS, .maxattr = M, + .policy = POLICY, ... }; This also gets rid of devlink_nl_cmd_region_read_dumpit() accessing the cb->data as ops, which we want to change in a later genl patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-22r8169: use netif_start_queue instead of netif_wake_qeueue in rtl8169_start_xmitHeiner Kallweit1-1/+1
Replace the call to netif_wake_queue in rtl8169_start_xmit with netif_start_queue as we don't need to actually wake up the queue since we are still in mid transmit so we just need to reset the bit so it doesn't prevent the next transmit. (Description shamelessly copied from a mail sent by Alex.) Suggested-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-22r8169: don't read interrupt mask register in interrupt handlerHeiner Kallweit1-2/+4
After the original patch network starts to crash on heavy load. It's not fully clear why this additional register read has such side effects, but removing it fixes the issue. Thanks also to Alex for his contribution and hints. [0] https://marc.info/?t=155268170400002&r=1&w=2 Fixes: e782410ed237 ("r8169: improve spurious interrupt detection") Reported-by: VDR User <user.vdr@gmail.com> Tested-by: VDR User <user.vdr@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-22net: phy: aquantia: add downshift supportHeiner Kallweit1-10/+145
Aquantia PHY's of the AQR107 family support the downshift feature. Add support for it as standard PHY tunable so that it can be controlled via ethtool. The AQCS109 supports a proprietary 2-pair 1Gbps mode. If two such PHY's are connected to each other with a 2-pair cable, they may not be able to establish a link if both advertise modes > 1Gbps. v2: - add downshift event detection - warn if downshift occurred - read downshifted rate from vendor register - enable downshift per default on all AQR107 family members Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-22watchdog/core: Make variables staticValdis Kletnieks1-2/+2
sparse complains: CHECK kernel/watchdog.c kernel/watchdog.c:45:19: warning: symbol 'nmi_watchdog_available' was not declared. Should it be static? kernel/watchdog.c:47:16: warning: symbol 'watchdog_allowed_mask' was not declared. Should it be static? They're not referenced by name from anyplace else, make them static. Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/7855.1552383228@turing-police
2019-03-22time/jiffies: Make refined_jiffies staticValdis Kletnieks1-1/+1
sparse complains: CHECK kernel/time/jiffies.c kernel/time/jiffies.c:92:20: warning: symbol 'refined_jiffies' was not declared. Should it be static? Its only used in file scope. Make it static. Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/32342.1552379915@turing-police
2019-03-22genirq/devres: Remove excess parameter from kernel docValdis Kletnieks1-2/+0
Building with 'make W=1' complains: CC kernel/irq/devres.o kernel/irq/devres.c:104: warning: Excess function parameter 'thread_fn' description in 'devm_request_any_context_irq' Remove it. Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/31207.1552378676@turing-police
2019-03-22x86/mm/pti: Make local symbols staticValdis Kletnieks1-2/+2
With 'make C=2 W=1', sparse and gcc both complain: CHECK arch/x86/mm/pti.c arch/x86/mm/pti.c:84:3: warning: symbol 'pti_mode' was not declared. Should it be static? arch/x86/mm/pti.c:605:6: warning: symbol 'pti_set_kernel_image_nonglobal' was not declared. Should it be static? CC arch/x86/mm/pti.o arch/x86/mm/pti.c:605:6: warning: no previous prototype for 'pti_set_kernel_image_nonglobal' [-Wmissing-prototypes] 605 | void pti_set_kernel_image_nonglobal(void) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ pti_set_kernel_image_nonglobal() is only used locally. 'pti_mode' exists in drivers/hwtracing/intel_th/pti.c as well, but it's a completely unrelated local (static) symbol. Make both static. Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/27680.1552376873@turing-police
2019-03-22futex: Ensure that futex address is aligned in handle_futex_death()Chen Jie1-0/+4
The futex code requires that the user space addresses of futexes are 32bit aligned. sys_futex() checks this in futex_get_keys() but the robust list code has no alignment check in place. As a consequence the kernel crashes on architectures with strict alignment requirements in handle_futex_death() when trying to cmpxchg() on an unaligned futex address which was retrieved from the robust list. [ tglx: Rewrote changelog, proper sizeof() based alignement check and add comment ] Fixes: 0771dfefc9e5 ("[PATCH] lightweight robust futexes: core") Signed-off-by: Chen Jie <chenjie6@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <dvhart@infradead.org> Cc: <peterz@infradead.org> Cc: <zengweilin@huawei.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1552621478-119787-1-git-send-email-chenjie6@huawei.com
2019-03-22iommu/vt-d: Save the right domain ID used by hardwareLu Baolu1-1/+1
The driver sets a default domain id (FLPT_DEFAULT_DID) in the first level only pasid entry, but saves a different domain id in @sdev->did. The value saved in @sdev->did will be used to invalidate the translation caches. Hence, the driver might result in invalidating the caches with a wrong domain id. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Fixes: 1c4f88b7f1f92 ("iommu/vt-d: Shared virtual address in scalable mode") Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-03-22iommu/vt-d: Check capability before disabling protected memoryLu Baolu1-0/+3
The spec states in 10.4.16 that the Protected Memory Enable Register should be treated as read-only for implementations not supporting protected memory regions (PLMR and PHMR fields reported as Clear in the Capability register). Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: mark gross <mgross@intel.com> Suggested-by: Ashok Raj <ashok.raj@intel.com> Fixes: f8bab73515ca5 ("intel-iommu: PMEN support") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-03-22iommu/iova: Fix tracking of recently failed iova addressRobert Richter1-2/+3
If a 32 bit allocation request is too big to possibly succeed, it early exits with a failure and then should never update max32_alloc_ size. This patch fixes current code, now the size is only updated if the slow path failed while walking the tree. Without the fix the allocation may enter the slow path again even if there was a failure before of a request with the same or a smaller size. Cc: <stable@vger.kernel.org> # 4.20+ Fixes: bee60e94a1e2 ("iommu/iova: Optimise attempts to allocate iova from 32bit address range") Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 01:30:55 +0300