| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are three tiny last-minute driver fixes for 4.20-rc8 that resolve
some reported issues, and one MAINTAINERS file update.
All of them are related to the hyper-v subsystem, it seems people are
actually testing and using it now, which is nice to see :)
The fixes are:
- uio_hv_generic: fix for opening multiple times
- Remove PCI dependancy on hyperv drivers
- return proper error code for an unopened channel.
And Sasha has signed up to help out with the hyperv maintainership.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-4.20-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Drivers: hv: vmbus: Return -EINVAL for the sys files for unopened channels
x86, hyperv: remove PCI dependency
MAINTAINERS: Patch monkey for the Hyper-V code
uio_hv_generic: set callbacks on open
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fix from Greg KH:
"Here is a single fix, a revert, for the 8250 serial driver to resolve
a reported problem.
There was some attempted patches to fix the issue, but people are
arguing about them, so reverting the patch to revert back to the 4.19
and older behavior is the best thing to do at this late in the release
cycle.
The revert has been in linux-next with no reported issues"
* tag 'tty-4.20-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes and ids from Greg KH:
"Here are some late xhci fixes for 4.20-rc8 as well as a few new device
ids for the option usb-serial driver.
The xhci fixes resolve some many-reported issues and all of these have
been in linux-next for a while with no reported problems"
* tag 'usb-4.20-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: xhci: fix 'broken_suspend' placement in struct xchi_hcd
xhci: Don't prevent USB2 bus suspend in state check intended for USB3 only
USB: serial: option: add Telit LN940 series
USB: serial: option: add Fibocom NL668 series
USB: serial: option: add Simcom SIM7500/SIM7600 (MBIM mode)
USB: serial: option: add GosunCn ZTE WeLink ME3630
USB: serial: option: add HP lt4132
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Restore code to allow BKOPS and CACHE ctrl even if no HPI support
- Reset HPI enabled state during re-init
- Use a default minimum timeout when enabling CACHE ctrl
MMC host:
- omap_hsmmc: Fix DMA API warning
- sdhci-tegra: Fix dt parsing of SDMMC pads autocal values
- Correct register accesses when enabling v4 mode"
* tag 'mmc-v4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Use a minimum 1600ms timeout when enabling CACHE ctrl
mmc: core: Allow BKOPS and CACHE ctrl even if no HPI support
mmc: core: Reset HPI enabled state during re-init and in case of errors
mmc: omap_hsmmc: fix DMA API warning
mmc: tegra: Fix for SDMMC pads autocal parsing from dt
mmc: sdhci: Fix sdhci_do_enable_v4_mode
|
|
This reverts commit 61c6de667263184125d5ca75e894fcad632b0dd3.
The reverted commit added page reference counting to iomap page
structures that are used to track block size < page size state. This
was supposed to align the code with page migration page accounting
assumptions, but what it has done instead is break XFS filesystems.
Every fstests run I've done on sub-page block size XFS filesystems
has since picking up this commit 2 days ago has failed with bad page
state errors such as:
# ./run_check.sh "-m rmapbt=1,reflink=1 -i sparse=1 -b size=1k" "generic/038"
....
SECTION -- xfs
FSTYP -- xfs (debug)
PLATFORM -- Linux/x86_64 test1 4.20.0-rc6-dgc+
MKFS_OPTIONS -- -f -m rmapbt=1,reflink=1 -i sparse=1 -b size=1k /dev/sdc
MOUNT_OPTIONS -- /dev/sdc /mnt/scratch
generic/038 454s ...
run fstests generic/038 at 2018-12-20 18:43:05
XFS (sdc): Unmounting Filesystem
XFS (sdc): Mounting V5 Filesystem
XFS (sdc): Ending clean mount
BUG: Bad page state in process kswapd0 pfn:3a7fa
page:ffffea0000ccbeb0 count:0 mapcount:0 mapping:ffff88800d9b6360 index:0x1
flags: 0xfffffc0000000()
raw: 000fffffc0000000 dead000000000100 dead000000000200 ffff88800d9b6360
raw: 0000000000000001 0000000000000000 00000000ffffffff
page dumped because: non-NULL mapping
CPU: 0 PID: 676 Comm: kswapd0 Not tainted 4.20.0-rc6-dgc+ #915
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/2014
Call Trace:
dump_stack+0x67/0x90
bad_page.cold.116+0x8a/0xbd
free_pcppages_bulk+0x4bf/0x6a0
free_unref_page_list+0x10f/0x1f0
shrink_page_list+0x49d/0xf50
shrink_inactive_list+0x19d/0x3b0
shrink_node_memcg.constprop.77+0x398/0x690
? shrink_slab.constprop.81+0x278/0x3f0
shrink_node+0x7a/0x2f0
kswapd+0x34b/0x6d0
? node_reclaim+0x240/0x240
kthread+0x11f/0x140
? __kthread_bind_mask+0x60/0x60
ret_from_fork+0x24/0x30
Disabling lock debugging due to kernel taint
....
The failures are from anyway that frees pages and empties the
per-cpu page magazines, so it's not a predictable failure or an easy
to debug failure.
generic/038 is a reliable reproducer of this problem - it has a 9 in
10 failure rate on one of my test machines. Failure on other
machines have been at random points in fstests runs but every run
has ended up tripping this problem. Hence generic/038 was used to
bisect the failure because it was the most reliable failure.
It is too close to the 4.20 release (not to mention holidays) to
try to diagnose, fix and test the underlying cause of the problem,
so reverting the commit is the only option we have right now. The
revert has been tested against a current tot 4.20-rc7+ kernel across
multiple machines running sub-page block size XFs filesystems and
none of the bad page state failures have been seen.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Cc: Piotr Jaroszynski <pjaroszynski@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Brian Foster <bfoster@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
transmission from FIFO
The current state of the spi-sh-msiof, in master transfer mode: if t-> bits_per_word <= 8,
if the data length is divisible by 4 ((len & 3) = 0), the length of each word will be 32 bits
In case of data length can not be divisible by 4 ((len & 3) != 0), always set each word to be
8 bits, this will increase the number of times that write to FIFO, increasing the number of
times it should be transmitted. Assume that the number of bytes of data length more than 64 bytes,
each transmission will write 64 times into the TFDR then transmit, a maximum one-time
transmission will transmit 64 bytes if each word is 8 bits long.
Switch to setting if t->bits_per_word <= 8, the word length will be 32 bits although the data
length is not divisible by 4, then if leftover, will transmit the balance and the length of each
words is 1 byte. The maximum each can transmit up to 64 x 4 (Data Size = 32 bits (4 bytes)) = 256 bytes.
TMDR2 : Bits 28 to 24 BITLEN1[4:0] Data Size (8 to 32 bits)
Bits 23 to 16 WDLEN1[7:0] Word Count (1 to 64 words)
Signed-off-by: Hoan Nguyen An <na-hoan@jinso.co.jp>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The n_voltages setting is not set, fix it.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
mcp16502_suspend/resume_noirq
mcp16502_suspend/resume_noirq is only used by SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
when CONFIG_PM_SLEEP is defined.
So use #ifdef CONFIG_PM_SLEEP instead CONFIG_SUSPEND guard.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
PPC KVM update for 4.21 from Paul Mackerras
The main new feature this time is support in HV nested KVM for passing
a device that is emulated by a level 0 hypervisor and presented to
level 1 as a PCI device through to a level 2 guest using VFIO.
Apart from that there are improvements for migration of radix guests
under HV KVM and some other fixes and cleanups.
|
|
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE
for debugfs files.
Semantic patch information:
Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file()
imposes some significant overhead as compared to
DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe().
Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
opal_pci_eeh_freeze_status
The current implementation of the OPAL_PCI_EEH_FREEZE_STATUS call in
skiboot's NPU driver does not touch the pci_error_type parameter so
it might have garbage but the powernv code analyzes it nevertheless.
This initializes pcierr and fstate to zero in all call sites.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
fixup_phb() is never used, this removes it.
pick_m64_pe() and reserve_m64_pe() are always defined for all powernv
PHBs: they are initialized by pnv_ioda_parse_m64_window() which is
called unconditionally from pnv_pci_init_ioda_phb() which initializes
all known PHB types on powernv so we can open code them.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Report branch predictor state flush as a mitigation for
Spectre variant 2.
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
At the moment PNV_IODA_PE_DEV is only used for NPU PEs which are not
present on IODA1 machines (i.e. POWER7) so let's remove a piece of
dead code.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
If the user choses not to use the mitigations, replace
the code sequence with nops.
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
As a part of cleanup, the SPAPR TCE IOMMU subdriver releases preregistered
memory. If there is a bug in memory release, the loop in
tce_iommu_release() becomes infinite; this actually happened to me.
This makes the loop finite and prints a warning on every failure to make
the code more bug prone.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Switching from the guest to host is another place
where the speculative accesses can be exploited.
Flush the branch predictor when entering KVM.
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The macro and few headers are not used so remove them.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
In order to protect against speculation attacks on
indirect branches, the branch predictor is flushed at
kernel entry to protect for the following situations:
- userspace process attacking another userspace process
- userspace process attacking the kernel
Basically when the privillege level change (i.e.the kernel
is entered), the branch predictor state is flushed.
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
addresses on demand
The powernv platform maintains 2 TCE tables for VFIO - a hardware TCE
table and a table with userspace addresses; the latter is used for
marking pages dirty when corresponging TCEs are unmapped from
the hardware table.
a68bd1267b72 ("powerpc/powernv/ioda: Allocate indirect TCE levels
on demand") enabled on-demand allocation of the hardware table,
however it missed the other table so it has still been fully allocated
at the boot time. This fixes the issue by allocating a single level,
just like we do for the hardware table.
Fixes: a68bd1267b72 ("powerpc/powernv/ioda: Allocate indirect TCE levels on demand")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
In order to protect against speculation attacks on
indirect branches, the branch predictor is flushed at
kernel entry to protect for the following situations:
- userspace process attacking another userspace process
- userspace process attacking the kernel
Basically when the privillege level change (i.e. the
kernel is entered), the branch predictor state is flushed.
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
When the command line argument is present, the Spectre variant 2
mitigations are disabled.
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
In order to flush the branch predictor the guest kernel performs
writes to the BUCSR register which is hypervisor privilleged. However,
the branch predictor is flushed at each KVM entry, so the branch
predictor has been already flushed, so just return as soon as possible
to guest.
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
[mpe: Tweak comment formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Currently for CONFIG_PPC_FSL_BOOK3E the spectre_v2 file is incorrect:
$ cat /sys/devices/system/cpu/vulnerabilities/spectre_v2
"Mitigation: Software count cache flush"
Which is wrong. Fix it to report vulnerable for now.
Fixes: ee13cb249fab ("powerpc/64s: Add support for software count cache flush")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The BUCSR register can be used to invalidate the entries in the
branch prediction mechanisms.
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
In order to protect against speculation attacks (Spectre
variant 2) on NXP PowerPC platforms, the branch predictor
should be flushed when the privillege level is changed.
This patch is adding the infrastructure to fixup at runtime
the code sections that are performing the branch predictor flush
depending on a boot arg parameter which is added later in a
separate patch.
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
It is reported that commit 95f408bbc4e4 ("media: cx23885: Ryzen DMA
related RiSC engine stall fixes") caused regresssions with other CPUs.
Ensure that the quirk will be applied only for the CPUs that
are known to cause problems.
A module option is added for explicit control of the behaviour.
Fixes: 95f408bbc4e4 ("media: cx23885: Ryzen DMA related RiSC engine stall fixes")
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Without this, cpumask_t and bool are not defined:
In file included from drivers/media/pci/ddbridge/ddbridge-ci.c:19:
In file included from drivers/media/pci/ddbridge/ddbridge.h:22:
./arch/arm/include/asm/irq.h:35:50: error: unknown type name 'cpumask_t'
extern void arch_trigger_cpumask_backtrace(const cpumask_t *mask,
^
./arch/arm/include/asm/irq.h:36:9: error: unknown type name 'bool'
bool exclude_self);
^
Doing a survey of the kernel tree, this appears to be expected because
'#include <asm/irq.h>' is always after the linux includes.
This also fixes warnings of this variety (with Clang):
In file included from drivers/media/pci/ddbridge/ddbridge-ci.c:19:
In file included from drivers/media/pci/ddbridge/ddbridge.h:56:
In file included from ./include/media/dvb_net.h:22:
In file included from ./include/linux/netdevice.h:50:
In file included from ./include/uapi/linux/neighbour.h:6:
In file included from ./include/linux/netlink.h:9:
In file included from ./include/net/scm.h:11:
In file included from ./include/linux/sched/signal.h:6:
./include/linux/signal.h:87:11: warning: array index 3 is past the end
of the array (which contains 2 elements) [-Warray-bounds]
return (set->sig[3] | set->sig[2] |
^ ~
./arch/arm/include/asm/signal.h:17:2: note: array 'sig' declared here
unsigned long sig[_NSIG_WORDS];
^
Fixes: b6973637c4cc ("media: ddbridge: remove another duplicate of io.h and sort includes")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
If the device tree doesn't reside in the memory which is declared
inside it, it has to be moved as well as this memory will not be
mapped by the kernel.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Add some documentation on which CPU versions map to which ISA
versions. This is all publicly available information, some of it
already in the kernel source, but it's much nicer to have it all in
one place.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This reverts the remains of commit b9ef7d6b11c1 ("powerpc: Update
default configurations").
That commit was proceeded by a commit which added a config option to
control use of BOOTX for early debug, ie. PPC_EARLY_DEBUG_BOOTX, and
then the update of the defconfigs was intended to not change behaviour
by then enabling the new config option.
However enabling PPC_EARLY_DEBUG had other consequences, notably
causing us to register the udbg console at the end of udbg_early_init().
This means on a system which doesn't have anything that BOOTX can
use (most systems), we register the udbg console very early but the
bootx code just throws everything away, meaning early boot messages
are never printed to the console.
What we want to happen is for the udbg console to only be registered
later (from setup_arch()) once we've setup udbg_putc, and then all
early boot messages will be replayed.
Fixes: b9ef7d6b11c1 ("powerpc: Update default configurations")
Reported-by: Torsten Duwe <duwe@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
For this use case, completions and semaphores are equivalent,
but semaphores are an awkward interface that should generally
be avoided, so use the completion instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The AFU irq code doesn't need to reach out to the platform.
Signed-off-by: Greg Kurz <groug@kaod.org>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Implementing rollback with goto and labels is a common practice that
leads to prettier and more maintainable code. FWIW, this design pattern
is already being used in alloc_link() a few lines below in this file.
Do the same in setup_xsl_irq().
Signed-off-by: Greg Kurz <groug@kaod.org>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The bamboo dts has a bug: it uses a non-naturally aligned range
for PCI memory space. This isnt' supported by the code, thus
causing PCI to break on this system.
This is due to the fact that while the chip memory map has 1G
reserved for PCI memory, it's only 512M aligned. The code doesn't
know how to split that into 2 different PMMs and fails, so limit
the region to 512M.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Add a IRQ init routine for the Nemo board which inits and attatches
the i8259 found in the SB600, and a cascade routine to dispatch the
interrupts.
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Add routines for Nemo specific devices to init at boot time, these
being board level power-off and SB600's rtc.
Also add a run time variable to prevent these being activated
if we boot on a reference board.
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Add a IRQ init routine for the Nemo board which inits and attatches
the i8259 found in the SB600, and a cascade routine to dispatch the
interrupts.
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The A-Eon Amigaone X1000's Nemo motherboard has an AMD SB600
connected to one of the PCI-e root ports on its PaSemi
Pwrficient 1628M SoC. Normally the SB600 southbridge would be
connected to a hidden PCI-e port on the system's northbridge,
and as a result doesn't fully comply with the PCI-e spec.
Add code to relax the PCI-e detection in both the root port
and the Linux kernel allowing on board devices to be detected.
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
As several other arches including x86, this patch makes it explicit
that a bad page fault is a NULL pointer dereference when the fault
address is lower than PAGE_SIZE
In the mean time, this page makes all bad_page_fault() messages
shorter so that they remain on one single line. And it prefixes them
by "BUG: " so that they get easily grepped.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Avoid pr_cont()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Combine the SYSCALL_EMU and SYSCALL_TRACE handling so that we only
call tracehook_report_syscall_entry() in one place.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
[mpe: Flesh out change log, s/cached_flags/flags/, reflow comments]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Powerpc has somewhat odd usage where ZONE_DMA is used for all memory on
common 64-bit configfs, and ZONE_DMA32 is used for 31-bit schemes.
Move to a scheme closer to what other architectures use (and I dare to
say the intent of the system):
- ZONE_DMA: optionally for memory < 31-bit (64-bit embedded only)
- ZONE_NORMAL: everything addressable by the kernel
- ZONE_HIGHMEM: memory > 32-bit for 32-bit kernels
Also provide information on how ZONE_DMA is used by defining
ARCH_ZONE_DMA_BITS.
Contains various fixes from Benjamin Herrenschmidt.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The CXL code never even looks at the dma mask, so there is no good
reason for this sanity check. Remove it because it gets in the way
of the dma ops refactoring.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
The implemementation for the CONFIG_NOT_COHERENT_CACHE case doesn't share
any code with the one for systems with coherent caches. Split it off
and merge it with the helpers in dma-noncoherent.c that have no other
callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
This function is internal to the DMA API implementation. Instead use
the DMA API to properly unmap. Note that the DMA API usage in this
driver is a disaster and urgently needs some work - it is missing all
the unmaps, seems to do a secondary map where it looks like it should
to a unmap in one place to work around cache coherency and the
directions passed in seem to be partially wrong.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
