| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A handful of build fixes for the T-Head errata, including some
functional issues the compilers found
- A fix for a nasty sigreturn bug
* tag 'riscv-for-linus-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Avoid coupling the T-Head CMOs and Zicbom
riscv: fix a nasty sigreturn bug...
riscv: make t-head erratas depend on MMU
riscv: fix RISCV_ISA_SVPBMT kconfig dependency warning
RISC-V: Clean up the Zicbom block size probing
|
|
arm/fixes
Reset controller fixes for v6.0
Fix the i.MX8MP PCIe PHY PERST bit polarity, issue the Sparx5 "switch"
reset (which turned out to be a rather more global reset) early on
startup, stubbing out the reset controller driver, and fix the NPCM8XX
USB reset sequence by setting IPSRST4 bits in the correct register.
* tag 'reset-fixes-for-v6.0' of git://git.pengutronix.de/pza/linux:
reset: npcm: fix iprst2 and iprst4 setting
reset: microchip-sparx5: issue a reset on startup
reset: imx7: Fix the iMX8MP PCIe PHY PERST support
Link: https://lore.kernel.org/r/20220923143519.41735-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pull kvm fixes from Paolo Bonzini:
"As everyone back came back from conferences, here are the pending
patches for Linux 6.0.
ARM:
- Fix for kmemleak with pKVM
s390:
- Fixes for VFIO with zPCI
- smatch fix
x86:
- Ensure XSAVE-capable hosts always allow FP and SSE state to be
saved and restored via KVM_{GET,SET}_XSAVE
- Fix broken max_mmu_rmap_size stat
- Fix compile error with old glibc that doesn't have gettid()"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Inject #UD on emulated XSETBV if XSAVES isn't enabled
KVM: x86: Always enable legacy FP/SSE in allowed user XFEATURES
KVM: x86: Reinstate kvm_vcpu_arch.guest_supported_xcr0
KVM: x86/mmu: add missing update to max_mmu_rmap_size
selftests: kvm: Fix a compile error in selftests/kvm/rseq_test.c
KVM: s390: pci: register pci hooks without interpretation
KVM: s390: pci: fix GAIT physical vs virtual pointers usage
KVM: s390: Pass initialized arg even if unused
KVM: s390: pci: fix plain integer as NULL pointer warnings
KVM: arm64: Use kmemleak_free_part_phys() to unregister hyp_mem_base
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A single fix for an issue in the xenbus driver (initialization of
multi-page rings for Xen PV devices)"
* tag 'for-linus-6.0-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/xenbus: fix xenbus_setup_ring()
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes for the week, i915, mediatek, hisilicon, mgag200 and
panel have some small fixes.
amdgpu has more stack size fixes for clang build, and fixes for new
IPs, but all with low regression chances since they are for stuff new
in v6.0.
i915:
- avoid a general protection failure when using perf/OA
- avoid kernel warnings on driver release
amdgpu:
- SDMA 6.x fix
- GPUVM TF fix
- DCN 3.2.x fixes
- DCN 3.1.x fixes
- SMU 13.x fixes
- Clang stack size fixes for recently enabled DML code
- Fix drm dirty callback change on non-atomic cases
- USB4 display fix
mediatek:
- dsi: Add atomic {destroy,duplicate}_state, reset callbacks
- dsi: Move mtk_dsi_stop() call back to mtk_dsi_poweroff()
- Fix wrong dither settings
hisilicon:
- Depend on MMU
mgag200:
- Fix console on G200ER
panel:
- Fix innolux_g121i1_l01 bus format"
* tag 'drm-fixes-2022-09-23-1' of git://anongit.freedesktop.org/drm/drm: (30 commits)
MAINTAINERS: switch graphics to airlied other addresses
drm/mediatek: dsi: Move mtk_dsi_stop() call back to mtk_dsi_poweroff()
drm/amd/display: Reduce number of arguments of dml314's CalculateFlipSchedule()
drm/amd/display: Reduce number of arguments of dml314's CalculateWatermarksAndDRAMSpeedChangeSupport()
drm/amdgpu: don't register a dirty callback for non-atomic
drm/amd/pm: drop the pptable related workarounds for SMU 13.0.0
drm/amd/pm: add support for 3794 pptable for SMU13.0.0
drm/amd/display: correct num_dsc based on HW cap
drm/amd/display: Disable OTG WA for the plane_state NULL case on DCN314
drm/amd/display: Add shift and mask for ICH_RESET_AT_END_OF_LINE
drm/amd/display: increase dcn315 pstate change latency
drm/amd/display: Fix DP MST timeslot issue when fallback happened
drm/amd/display: Display distortion after hotplug 5K tiled display
drm/amd/display: Update dummy P-state search to use DCN32 DML
drm/amd/display: skip audio setup when audio stream is enabled
drm/amd/display: update gamut remap if plane has changed
drm/amd/display: Assume an LTTPR is always present on fixed_vs links
drm/amd/display: fix dcn315 memory channel count and width read
drm/amd/display: Fix double cursor on non-video RGB MPO
drm/amd/display: Only consider pixle rate div policy for DCN32+
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm ARM64 DTS fixes for 6.0
This corrects invalid IOMMU streams for the SM8150 CDSP FastRPC, moves
the wakeup-source of SC7280 USB nodes to the correct place, fixes the
SM8350 UFS PHY serdes size to not overlap with the other subnodes and
updates the firmware location for the Lenovo ThinkPad X13s to match the
movement in linux-firmware.
It also updates MAINTAINERS and .mailmap to reflect the changes in my
email address.
* tag 'qcom-arm64-fixes-for-6.0' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sm8350: fix UFS PHY serdes size
arm64: dts: qcom: sc8280xp-x13s: Update firmware location
MAINTAINERS: Update Bjorn's email address
arm64: dts: qcom: sc7280: move USB wakeup-source property
arm64: dts: qcom: thinkpad-x13s: Fix firmware location
arm64: dts: qcom: sm8150: Fix fastrpc iommu values
Link: https://lore.kernel.org/r/20220921142939.1310163-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The DT parser is dependent on the PCI device being tagged as
device_type = "pci" in order to parse memory ranges properly.
Fix this up.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220919092608.813511-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
suspend/resume time"
This reverts commit 211f276ed3d96e964d2d1106a198c7f4a4b3f4c0.
For quite some time, core DRM helpers already ensure that any relevant
connectors/CRTCs/etc. are disabled, as well as their associated
components (e.g., bridges) when suspending the system. Thus,
analogix_dp_bridge_{enable,disable}() already get called, which in turn
call drm_panel_{prepare,unprepare}(). This makes these drm_panel_*()
calls redundant.
Besides redundancy, there are a few problems with this handling:
(1) drm_panel_{prepare,unprepare}() are *not* reference-counted APIs and
are not in general designed to be handled by multiple callers --
although some panel drivers have a coarse 'prepared' flag that mitigates
some damage, at least. So at a minimum this is redundant and confusing,
but in some cases, this could be actively harmful.
(2) The error-handling is a bit non-standard. We ignored errors in
suspend(), but handled errors in resume(). And recently, people noticed
that the clk handling is unbalanced in error paths, and getting *that*
right is not actually trivial, given the current way errors are mostly
ignored.
(3) In the particular way analogix_dp_{suspend,resume}() get used (e.g.,
in rockchip_dp_*(), as a late/early callback), we don't necessarily have
a proper PM relationship between the DP/bridge device and the panel
device. So while the DP bridge gets resumed, the panel's parent device
(e.g., platform_device) may still be suspended, and so any prepare()
calls may fail.
So remove the superfluous, possibly-harmful suspend()/resume() handling
of panel state.
Fixes: 211f276ed3d9 ("drm: bridge: analogix/dp: add panel prepare/unprepare in suspend/resume time")
Link: https://lore.kernel.org/all/Yv2CPBD3Picg%2FgVe@google.com/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220822180729.1.I8ac5abe3a4c1c6fd5c061686c6e883c22f69022c@changeid
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
More pci fixes
Fix for a code analyser warning
|
|
Alexander Couzens says:
====================
net: mt7531: pll & reset fixes
====================
Link: https://lore.kernel.org/r/20220917000734.520253-1-lynxis@fe80.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The datasheet [1] explicit describes it as requirement for a reset.
[1] MT7531 Reference Manual for Development Board rev 1.0, page 735
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the PLL init of the switch out of the pad configuration of the port
6 (usally cpu port).
Fix a unidirectional 100 mbit limitation on 1 gbit or 2.5 gbit links for
outbound traffic on port 5 or port 6.
Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit bbb774d921e2 ("net: Add tests for bonding and team address list
management") adds the net team driver tests in the directory:
tools/testing/selftests/drivers/net/team/
The file entry in MAINTAINERS for the TEAM DRIVER however refers to:
tools/testing/selftests/net/team/
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken file pattern.
Repair this file entry in TEAM DRIVER.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20220922114053.10883-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Due to undocumented, hysterical raisins on x86, the CFI jump-table
sections in .text are needlessly aligned to PMD_SIZE in the vmlinux
linker script. When compiling a CFI-enabled arm64 kernel with a 64KiB
page-size, a PMD maps 512MiB of virtual memory and so the .text section
increases to a whopping 940MiB and blows the final Image up to 960MiB.
Others report a link failure.
Since the CFI jump-table requires only instruction alignment, reduce the
alignment directives to function alignment for parity with other parts
of the .text section. This reduces the size of the .text section for the
aforementioned 64KiB page size arm64 kernel to 19MiB for a much more
reasonable total Image size of 39MiB.
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: "Mohan Rao .vanimina" <mailtoc.mohanrao@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/CAL_GTzigiNOMYkOPX1KDnagPhJtFNqSK=1USNbS0wUL4PW6-Uw@mail.gmail.com/
Fixes: cf68fffb66d6 ("add support for Clang CFI")
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220922215715.13345-1-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
sunxi SRAM controller fixes for
- loading/unloading
- claiming regions
- debugfs info
* tag 'sunxi-drivers-fixes-for-6.0-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
soc: sunxi: sram: Fix debugfs info for A64 SRAM C
soc: sunxi: sram: Fix probe function ordering issues
soc: sunxi: sram: Prevent the driver from being unbound
soc: sunxi: sram: Actually claim SRAM regions
Link: https://lore.kernel.org/r/YyeN0m78+m9nNEah@kista.localdomain
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom SoCs driver fixes for 6.0, please
pull the following:
- Florian fixes a double of_node_put() in the Broadcom STB Bus Interface
Unit driver
* tag 'arm-soc/for-6.0/drivers-fixes-v2' of https://github.com/Broadcom/stblinux:
soc: bcm: brcmstb: biuctrl: Avoid double of_node_put()
Link: https://lore.kernel.org/r/20220918205038.3017866-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Two fixes for omaps
A fix to remove usb4 from am5748 as it does not exist on the SoC, and
a fix for am335x mmc dma that wired direct and should not use the xbar.
Note that the am5748 fix depends on the recent deferred probe regression
fixes to boot. I ended up picking the merge commit to base it on as it
describes what got fixed quite nicely rather than a -rc tag.
* tag 'omap-for-6.0/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am5748: keep usb4_tm disabled
ARM: dts: am33xx: Fix MMCHS0 dma properties
Link: https://lore.kernel.org/r/pull-1663140667-273537@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
resctrl_arch_rmid_read() returns a value in chunks, as read from the
hardware. This needs scaling to bytes by mon_scale, as provided by
the architecture code.
Now that resctrl_arch_rmid_read() performs the overflow and corrections
itself, it may as well return a value in bytes directly. This allows
the accesses to the architecture specific 'hw' structure to be removed.
Move the mon_scale conversion into resctrl_arch_rmid_read().
mbm_bw_count() is updated to calculate bandwidth from bytes.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-22-james.morse@arm.com
|
|
resctrl_rmid_realloc_threshold can be set by user-space. The maximum
value is specified by the architecture.
Currently max_threshold_occ_write() reads the maximum value from
boot_cpu_data.x86_cache_size, which is not portable to another
architecture.
Add resctrl_rmid_realloc_limit to describe the maximum size in bytes
that user-space can set the threshold to.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-21-james.morse@arm.com
|
|
resctrl_cqm_threshold is stored in a hardware specific chunk size,
but exposed to user-space as bytes.
This means the filesystem parts of resctrl need to know how the hardware
counts, to convert the user provided byte value to chunks. The interface
between the architecture's resctrl code and the filesystem ought to
treat everything as bytes.
Change the unit of resctrl_cqm_threshold to bytes. resctrl_arch_rmid_read()
still returns its value in chunks, so this needs converting to bytes.
As all the users have been touched, rename the variable to
resctrl_rmid_realloc_threshold, which describes what the value is for.
Neither r->num_rmid nor hw_res->mon_scale are guaranteed to be a power
of 2, so the existing code introduces a rounding error from resctrl's
theoretical fraction of the cache usage. This behaviour is kept as it
ensures the user visible value matches the value read from hardware
when the rmid will be reallocated.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-20-james.morse@arm.com
|
|
resctrl_arch_rmid_read() is intended as the function that an
architecture agnostic resctrl filesystem driver can use to
read a value in bytes from a counter. Currently the function returns
the MBM values in chunks directly from hardware. When reading a bandwidth
counter, get_corrected_mbm_count() must be used to correct the
value read.
get_corrected_mbm_count() is architecture specific, this work should be
done in resctrl_arch_rmid_read().
Move the function calls. This allows the resctrl filesystems's chunks
value to be removed in favour of the architecture private version.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-19-james.morse@arm.com
|
|
resctrl_arch_rmid_read() is intended as the function that an
architecture agnostic resctrl filesystem driver can use to
read a value in bytes from a counter. Currently the function returns
the MBM values in chunks directly from hardware. When reading a bandwidth
counter, mbm_overflow_count() must be used to correct for any possible
overflow.
mbm_overflow_count() is architecture specific, its behaviour should
be part of resctrl_arch_rmid_read().
Move the mbm_overflow_count() calls into resctrl_arch_rmid_read().
This allows the resctrl filesystems's prev_msr to be removed in
favour of the architecture private version.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-18-james.morse@arm.com
|
|
resctrl_arch_rmid_read() is intended as the function that an
architecture agnostic resctrl filesystem driver can use to
read a value in bytes from a hardware register. Currently the function
returns the MBM values in chunks directly from hardware.
To convert this to bytes, some correction and overflow calculations
are needed. These depend on the resource and domain structures.
Overflow detection requires the old chunks value. None of this
is available to resctrl_arch_rmid_read(). MPAM requires the
resource and domain structures to find the MMIO device that holds
the registers.
Pass the resource and domain to resctrl_arch_rmid_read(). This makes
rmid_dirty() too big. Instead merge it with its only caller, and the
name is kept as a local variable.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-17-james.morse@arm.com
|
|
Fix kconfig dependency warnings and subsequent build errors:
WARNING: unmet direct dependencies detected for SERIAL_SUNPLUS
Depends on [n]: TTY [=n] && HAS_IOMEM [=y] && (ARCH_SUNPLUS [=y] || COMPILE_TEST [=n])
Selected by [y]:
- SOC_SP7021 [=y] && ARCH_SUNPLUS [=y]
WARNING: unmet direct dependencies detected for SERIAL_SUNPLUS_CONSOLE
Depends on [n]: TTY [=n] && HAS_IOMEM [=y] && SERIAL_SUNPLUS [=y]
Selected by [y]:
- SOC_SP7021 [=y] && ARCH_SUNPLUS [=y]
(samples, not all:)
drivers/tty/serial/sunplus-uart.c:342: undefined reference to `uart_get_baud_rate'
arm-linux-gnueabi-ld: drivers/tty/serial/sunplus-uart.c:379: undefined reference to `uart_update_timeout'
drivers/tty/serial/sunplus-uart.c:526: undefined reference to `uart_console_write'
arm-linux-gnueabi-ld: drivers/tty/serial/sunplus-uart.c:274: undefined reference to `tty_flip_buffer_push'
arm-linux-gnueabi-ld: drivers/tty/serial/sunplus-uart.o:(.data+0xa8): undefined reference to `uart_console_device'
drivers/tty/serial/sunplus-uart.c:720: undefined reference to `uart_register_driver'
arm-linux-gnueabi-ld: drivers/tty/serial/sunplus-uart.c:726: undefined reference to `uart_unregister_driver'
drivers/tty/serial/sunplus-uart.c:551: undefined reference to `uart_parse_options'
arm-linux-gnueabi-ld: drivers/tty/serial/sunplus-uart.c:553: undefined reference to `uart_set_options'
This is the same technique that is used 2 times in
arch/arm/mach-versatile/Kconfig.
Fixes: 0aa94eea8d95 ("ARM: sunplus: Add initial support for Sunplus SP7021 SoC")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Qin Jian <qinjian@cqplus1.com>
Cc: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
__rmid_read() selects the specified eventid and returns the counter
value from the MSR. The error handling is architecture specific, and
handled by the callers, rdtgroup_mondata_show() and __mon_event_count().
Error handling should be handled by architecture specific code, as
a different architecture may have different requirements. MPAM's
counters can report that they are 'not ready', requiring a second
read after a short delay. This should be hidden from resctrl.
Make __rmid_read() the architecture specific function for reading
a counter. Rename it resctrl_arch_rmid_read() and move the error
handling into it.
A read from a counter that hardware supports but resctrl does not
now returns -EINVAL instead of -EIO from the default case in
__mon_event_count(). It isn't possible for user-space to see this
change as resctrl doesn't expose counters it doesn't support.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-16-james.morse@arm.com
|
|
In preparation for reducing the use of ksize(), record the actual
allocation size for later memcpy(). This avoids copying extra
(uninitialized!) bytes into the patch buffer when the requested
allocation size isn't exactly the size of a kmalloc bucket.
Additionally, fix potential future issues where runtime bounds checking
will notice that the buffer was allocated to a smaller value than
returned by ksize().
Fixes: 757885e94a22 ("x86, microcode, amd: Early microcode patch loading support for AMD")
Suggested-by: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/lkml/CA+DvKQ+bp7Y7gmaVhacjv9uF6Ar-o4tet872h4Q8RPYPJjcJQA@mail.gmail.com/
|
|
When GEM is in SGMII mode and disabled as a wakeup source, the power
management controller can power down the entire full power domain(FPD)
if none of the FPD devices are in use.
Incase of FPD off, there are below ethernet link up issues on non-wakeup
suspend/resume. To fix it add phy_exit() in suspend and phy_init() in the
resume path which reinitializes PS GTR SGMII lanes.
$ echo +20 > /sys/class/rtc/rtc0/wakealarm
$ echo mem > /sys/power/state
After resume:
$ ifconfig eth0 up
xilinx-psgtr fd400000.phy: lane 0 (type 10, protocol 5): PLL lock timeout
phy phy-fd400000.phy.0: phy poweron failed --> -110
xilinx-psgtr fd400000.phy: lane 0 (type 10, protocol 5): PLL lock timeout
SIOCSIFFLAGS: Connection timed out
phy phy-fd400000.phy.0: phy poweron failed --> -110
Fixes: 8b73fa3ae02b ("net: macb: Added ZynqMP-specific initialization")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change adds support for not enabling carrier during TUNSETIFF
interface creation by specifying the IFF_NO_CARRIER flag.
Our tests make heavy use of tun interfaces. In some scenarios, the test
process creates the interface but another process brings it up after the
interface is discovered via netlink notification. In that case, it is
not possible to create a tun/tap interface with carrier off without it
racing against the bring up. Immediately setting carrier off via
TUNSETCARRIER is still too late.
Signed-off-by: Patrick Rohr <prohr@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To abstract the rmid counters into a helper that returns the number
of bytes counted, architecture specific per-rmid state is needed.
It needs to be possible to reset this hidden state, as the values
may outlive the life of an rmid, or the mount time of the filesystem.
mon_event_read() is called with first = true when an rmid is first
allocated in mkdir_mondata_subdir(). Add resctrl_arch_reset_rmid()
and call it from __mon_event_count()'s rr->first check.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-15-james.morse@arm.com
|
|
Correct I2C address for the register list in lt8912_write_lvds_config(),
these registers are on the first I2C address (0x48), the current
function is just writing garbage to the wrong registers and this creates
multiple issues (artifacts and output completely corrupted) on some HDMI
displays.
Correct I2C address comes from Lontium documentation and it is the one
used on other out-of-tree LT8912B drivers [1].
[1] https://github.com/boundarydevices/linux/blob/boundary-imx_5.10.x_2.0.0/drivers/video/lt8912.c#L296
Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-4-dev@pschenker.ch
|
|
The Lontium LT8912 does have a setting for DVI or HDMI. This patch reads
from EDID what the display needs and sets it accordingly.
Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-3-dev@pschenker.ch
|
|
Currently the bridge driver does not take care whether or not the display
needs positive/negative vertical/horizontal syncs. Pass these two flags
to the bridge from the EDID that was read out from the display.
Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-2-dev@pschenker.ch
|
|
This reverts commit a3b884cef873 ("firmware: arm_scmi: Add clock management
to the SCMI power domain").
Using the GENPD_FLAG_PM_CLK tells genpd to gate/ungate the consumer
device's clock(s) during runtime suspend/resume through the PM clock API.
More precisely, in genpd_runtime_resume() the clock(s) for the consumer
device would become ungated prior to the driver-level ->runtime_resume()
callbacks gets invoked.
This behaviour isn't a good fit for all platforms/drivers. For example, a
driver may need to make some preparations of its device in its
->runtime_resume() callback, like calling clk_set_rate() before the
clock(s) should be ungated. In these cases, it's easier to let the clock(s)
to be managed solely by the driver, rather than at the PM domain level.
For these reasons, let's drop the use GENPD_FLAG_PM_CLK for the SCMI PM
domain, as to enable it to be more easily adopted across ARM platforms.
Fixes: a3b884cef873 ("firmware: arm_scmi: Add clock management to the SCMI power domain")
Cc: Nicolas Pitre <npitre@baylibre.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220919122033.86126-1-ulf.hansson@linaro.org
|
|
My linux.ie address is in a bad place.
also add dri-devel for agpgart.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull
* drm/hisilicon: Depend on MMU
* drm/mgag200: Fix console on G200ER
* drm/panel: Fix innolux_g121i1_l01 bus format
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YyxtXS588at6S4wg@linux-uq9g
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes for Linux 6.0
1. dsi: Add atomic {destroy,duplicate}_state, reset callbacks
2. drm/mediatek: Fix wrong dither settings
3. dsi: Move mtk_dsi_stop() call back to mtk_dsi_poweroff()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220921235624.23580-1-chunkuang.hu@kernel.org
|
|
Currently, uncompressed data is all handled in the shifted way, which
means we have to shift the whole on-disk plain pcluster to get the
logical data. However, since we are also using in-place I/O for
uncompressed data, data copy will be reduced a lot if pcluster is
recorded in the interlaced way as illustrated below:
_______________________________________________________________
| | | |_ tail part |_ head part _|
|<- blk0 ->| .. |<- blkn-2 ->|<- blkn-1 ->|
The logical data then becomes:
________________________________________________________
|_ head part _|_ blk0 _| .. |_ blkn-2 _|_ tail part _|
In addition, non-4k plain pclusters are also survived by the
interlaced way, which can be used for non-4k lclusters as well.
However, it's almost impossible to de-duplicate uncompressed data
in the interlaced way, therefore shifted uncompressed data is still
useful.
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/8369112678604fdf4ef796626d59b1fdd0745a53.1663898962.git.huyue2@coolpad.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
The implementation of these two functions in fscache mode is almost the
same. Extract the same part as a generic helper to remove the code
duplication.
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com>
Link: https://lore.kernel.org/r/20220922062414.20437-1-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.0-2022-09-21:
amdgpu:
- SDMA 6.x fix
- GPUVM TF fix
- DCN 3.2.x fixes
- DCN 3.1.x fixes
- SMU 13.x fixes
- Clang stack size fixes for recently enabled DML code
- Fix drm dirty callback change on non-atomic cases
- USB4 display fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220921220605.6136-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small and pretty obvious fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpt3sas: Fix return value check of dma_get_required_mask()
scsi: qla2xxx: Fix memory leak in __qlt_24xx_handle_abts()
scsi: qedf: Fix a UAF bug in __qedf_probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Fix a possible use-after-free in SLUB's kmem_cache removal,
introduced in this cycle, by Feng Tang.
- WQ_MEM_RECLAIM dependency fix for the workqueue-based cpu slab
flushing introduced in 5.15, by Maurizio Lombardi.
- Add missing KASAN hooks in two kmalloc entry paths, by Peter
Collingbourne.
- A BUG_ON() removal in SLUB's kmem_cache creation when allocation
fails (too small to possibly happen in practice, syzbot used fault
injection), by Chao Yu.
* tag 'slab-for-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm: slub: fix flush_cpu_slab()/__free_slab() invocations in task context.
mm/slab_common: fix possible double free of kmem_cache
kasan: call kasan_malloc() from __kmalloc_*track_caller()
mm/slub: fix to return errno if kmalloc() fails
|
|
Inject #UD when emulating XSETBV if CR4.OSXSAVE is not set. This also
covers the "XSAVE not supported" check, as setting CR4.OSXSAVE=1 #GPs if
XSAVE is not supported (and userspace gets to keep the pieces if it
forces incoherent vCPU state).
Add a comment to kvm_emulate_xsetbv() to call out that the CPU checks
CR4.OSXSAVE before checking for intercepts. AMD'S APM implies that #UD
has priority (says that intercepts are checked before #GP exceptions),
while Intel's SDM says nothing about interception priority. However,
testing on hardware shows that both AMD and Intel CPUs prioritize the #UD
over interception.
Fixes: 02d4160fbd76 ("x86: KVM: add xsetbv to the emulator")
Cc: stable@vger.kernel.org
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220824033057.3576315-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Allow FP and SSE state to be saved and restored via KVM_{G,SET}_XSAVE on
XSAVE-capable hosts even if their bits are not exposed to the guest via
XCR0.
Failing to allow FP+SSE first showed up as a QEMU live migration failure,
where migrating a VM from a pre-XSAVE host, e.g. Nehalem, to an XSAVE
host failed due to KVM rejecting KVM_SET_XSAVE. However, the bug also
causes problems even when migrating between XSAVE-capable hosts as
KVM_GET_SAVE won't set any bits in user_xfeatures if XSAVE isn't exposed
to the guest, i.e. KVM will fail to actually migrate FP+SSE.
Because KVM_{G,S}ET_XSAVE are designed to allowing migrating between
hosts with and without XSAVE, KVM_GET_XSAVE on a non-XSAVE (by way of
fpu_copy_guest_fpstate_to_uabi()) always sets the FP+SSE bits in the
header so that KVM_SET_XSAVE will work even if the new host supports
XSAVE.
Fixes: ad856280ddea ("x86/kvm/fpu: Limit guest user_xfeatures to supported bits of XCR0")
bz: https://bugzilla.redhat.com/show_bug.cgi?id=2079311
Cc: stable@vger.kernel.org
Cc: Leonardo Bras <leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
[sean: add comment, massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220824033057.3576315-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reinstate the per-vCPU guest_supported_xcr0 by partially reverting
commit 988896bb6182; the implicit assessment that guest_supported_xcr0 is
always the same as guest_fpu.fpstate->user_xfeatures was incorrect.
kvm_vcpu_after_set_cpuid() isn't the only place that sets user_xfeatures,
as user_xfeatures is set to fpu_user_cfg.default_features when guest_fpu
is allocated via fpu_alloc_guest_fpstate() => __fpstate_reset().
guest_supported_xcr0 on the other hand is zero-allocated. If userspace
never invokes KVM_SET_CPUID2, supported XCR0 will be '0', whereas the
allowed user XFEATURES will be non-zero.
Practically speaking, the edge case likely doesn't matter as no sane
userspace will live migrate a VM without ever doing KVM_SET_CPUID2. The
primary motivation is to prepare for KVM intentionally and explicitly
setting bits in user_xfeatures that are not set in guest_supported_xcr0.
Because KVM_{G,S}ET_XSAVE can be used to svae/restore FP+SSE state even
if the host doesn't support XSAVE, KVM needs to set the FP+SSE bits in
user_xfeatures even if they're not allowed in XCR0, e.g. because XCR0
isn't exposed to the guest. At that point, the simplest fix is to track
the two things separately (allowed save/restore vs. allowed XCR0).
Fixes: 988896bb6182 ("x86/kvm/fpu: Remove kvm_vcpu_arch.guest_supported_xcr0")
Cc: stable@vger.kernel.org
Cc: Leonardo Bras <leobras@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220824033057.3576315-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The update to statistic max_mmu_rmap_size is unintentionally removed by
commit 4293ddb788c1 ("KVM: x86/mmu: Remove redundant spte present check
in mmu_set_spte"). Add missing update to it or max_mmu_rmap_size will
always be nonsensical 0.
Fixes: 4293ddb788c1 ("KVM: x86/mmu: Remove redundant spte present check in mmu_set_spte")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Message-Id: <20220907080657.42898-1-linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The following warning appears when executing:
make -C tools/testing/selftests/kvm
rseq_test.c: In function ‘main’:
rseq_test.c:237:33: warning: implicit declaration of function ‘gettid’; did you mean ‘getgid’? [-Wimplicit-function-declaration]
(void *)(unsigned long)gettid());
^~~~~~
getgid
/usr/bin/ld: /tmp/ccr5mMko.o: in function `main':
../kvm/tools/testing/selftests/kvm/rseq_test.c:237: undefined reference to `gettid'
collect2: error: ld returned 1 exit status
make: *** [../lib.mk:173: ../kvm/tools/testing/selftests/kvm/rseq_test] Error 1
Use the more compatible syscall(SYS_gettid) instead of gettid() to fix it.
More subsequent reuse may cause it to be wrapped in a lib file.
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Message-Id: <20220802071240.84626-1-cloudliang@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.0, take #2
- Fix kmemleak usage in Protected KVM (again)
|
|
Commit 5a836bf6b09f ("mm: slub: move flush_cpu_slab() invocations
__free_slab() invocations out of IRQ context") moved all flush_cpu_slab()
invocations to the global workqueue to avoid a problem related
with deactivate_slab()/__free_slab() being called from an IRQ context
on PREEMPT_RT kernels.
When the flush_all_cpu_locked() function is called from a task context
it may happen that a workqueue with WQ_MEM_RECLAIM bit set ends up
flushing the global workqueue, this will cause a dependency issue.
workqueue: WQ_MEM_RECLAIM nvme-delete-wq:nvme_delete_ctrl_work [nvme_core]
is flushing !WQ_MEM_RECLAIM events:flush_cpu_slab
WARNING: CPU: 37 PID: 410 at kernel/workqueue.c:2637
check_flush_dependency+0x10a/0x120
Workqueue: nvme-delete-wq nvme_delete_ctrl_work [nvme_core]
RIP: 0010:check_flush_dependency+0x10a/0x120[ 453.262125] Call Trace:
__flush_work.isra.0+0xbf/0x220
? __queue_work+0x1dc/0x420
flush_all_cpus_locked+0xfb/0x120
__kmem_cache_shutdown+0x2b/0x320
kmem_cache_destroy+0x49/0x100
bioset_exit+0x143/0x190
blk_release_queue+0xb9/0x100
kobject_cleanup+0x37/0x130
nvme_fc_ctrl_free+0xc6/0x150 [nvme_fc]
nvme_free_ctrl+0x1ac/0x2b0 [nvme_core]
Fix this bug by creating a workqueue for the flush operation with
the WQ_MEM_RECLAIM bit set.
Fixes: 5a836bf6b09f ("mm: slub: move flush_cpu_slab() invocations __free_slab() invocations out of IRQ context")
Cc: <stable@vger.kernel.org>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
The PCI device returned by acpi_get_pci_dev() needs to be registered,
so if it corresponds to an ACPI device object, the struct acpi_device
representing that object must be registered too and, moreover, it
should be the ACPI companion of the given PCI device. Thus it should
be sufficient to look for it in the ACPI device object's list of
physical nodes associated with it.
Modify the code accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, mbox_client_txdone() is called from the PCC address space
handler and that expects the user the Tx state machine to be controlled
by the client which is not the case and the below warning is thrown:
| PCCT: Client can't run the TX ticker
Let the controller run the state machine and the end of Tx can be
acknowledge by calling mbox_chan_txdone() instead.
Fixes: 77e2a04745ff ("ACPI: PCC: Implement OperationRegion handler for the PCC Type 3 subtype")
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
