| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The __of_mdiobus_register() function was storing the device node in
dev.of_node without increasing its reference count. It implicitly relied
on the caller to maintain the allocated node until the mdiobus was
unregistered.
Now, __of_mdiobus_register() will acquire the node before assigning it,
and of_mdiobus_unregister_callback() will be called at the end of
mdio_unregister().
Drivers can now release the node immediately after MDIO registration.
Some of them are already doing that even before this patch.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
When parsing emails from .yaml files in particular, stray punctuation
such as a leading '-' can end up in the name. For example, consider a
common YAML section such as:
maintainers:
- devicetree@vger.kernel.org
This would previously be processed by get_maintainer.pl as:
- <devicetree@vger.kernel.org>
Make the logic in clean_file_emails more robust by deleting any
sub-names which consist of common single punctuation marks before
proceeding to the best-effort name extraction logic. The output is then
correct:
devicetree@vger.kernel.org
Some additional comments are added to the function to make things
clearer to future readers.
Link: https://lore.kernel.org/all/0173e76a36b3a9b4e7f324dd3a36fd4a9757f302.camel@perches.com/
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
While the script correctly extracts UTF-8 encoded names from the
MAINTAINERS file, the regular expressions damage my name when parsing
from .yaml files. Fix this by replacing the Latin-1-compatible regular
expressions with the unicode property matcher \p{L}, which matches on
any letter according to the Unicode General Category of letters.
The proposed solution only works if the script uses proper string
encoding from the outset, so instruct Perl to unconditionally open all
files with UTF-8 encoding. This should be safe, as the entire source
tree is either UTF-8 or ASCII encoded anyway. See [1] for a detailed
analysis.
Furthermore, to prevent the \w expression from matching non-ASCII when
checking for whether a name should be escaped with quotes, add the /a
flag to the regular expression. The escaping logic was duplicated in
two places, so it has been factored out into its own function.
The original issue was also identified on the tools mailing list [2].
This should solve the observed side effects there as well.
Link: https://lore.kernel.org/all/dzn6uco4c45oaa3ia4u37uo5mlt33obecv7gghj2l756fr4hdh@mt3cprft3tmq/ [1]
Link: https://lore.kernel.org/tools/20230726-gush-slouching-a5cd41@meerkat/ [2]
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix readers that are blocked on the ring buffer when buffer_percent
is 100%. They are supposed to wake up when the buffer is full, but
because the sub-buffer that the writer is on is never considered
"dirty" in the calculation, dirty pages will never equal nr_pages.
Add +1 to the dirty count in order to count for the sub-buffer that
the writer is on.
- When a reader is blocked on the "snapshot_raw" file, it is to be
woken up when a snapshot is done and be able to read the snapshot
buffer. But because the snapshot swaps the buffers (the main one with
the snapshot one), and the snapshot reader is waiting on the old
snapshot buffer, it was not woken up (because it is now on the main
buffer after the swap). Worse yet, when it reads the buffer after a
snapshot, it's not reading the snapshot buffer, it's reading the live
active main buffer.
Fix this by forcing a wakeup of all readers on the snapshot buffer
when a new snapshot happens, and then update the buffer that the
reader is reading to be back on the snapshot buffer.
- Fix the modification of the direct_function hash. There was a race
when new functions were added to the direct_function hash as when it
moved function entries from the old hash to the new one, a direct
function trace could be hit and not see its entry.
This is fixed by allocating the new hash, copy all the old entries
onto it as well as the new entries, and then use rcu_assign_pointer()
to update the new direct_function hash with it.
This also fixes a memory leak in that code.
- Fix eventfs ownership
* tag 'trace-v6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Fix modification of direct_function hash while in use
tracing: Fix blocked reader of snapshot buffer
ring-buffer: Fix wake ups when buffer_percent is set to 100
eventfs: Fix file and directory uid and gid ownership
|
|
Directly return NULL or 'next' instead of breaking out of the loop.
Signed-off-by: David Laight <david.laight@aculab.com>
[ Split original patch into two independent parts - Linus ]
Link: https://lore.kernel.org/lkml/7c8828aec72e42eeb841ca0ee3397e9a@AcuMS.aculab.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
osq_wait_next() is passed 'prev' from osq_lock() and NULL from
osq_unlock() but only needs the 'cpu' value to write to lock->tail.
Just pass prev->cpu or OSQ_UNLOCKED_VAL instead.
Should have no effect on the generated code since gcc manages to assume
that 'prev != NULL' due to an earlier dereference.
Signed-off-by: David Laight <david.laight@aculab.com>
[ Changed 'old' to 'old_cpu' by request from Waiman Long - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
struct optimistic_spin_node is private to the implementation.
Move it into the C file to ensure nothing is accessing it.
Signed-off-by: David Laight <david.laight@aculab.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Masami Hiramatsu reported a memory leak in register_ftrace_direct() where
if the number of new entries are added is large enough to cause two
allocations in the loop:
for (i = 0; i < size; i++) {
hlist_for_each_entry(entry, &hash->buckets[i], hlist) {
new = ftrace_add_rec_direct(entry->ip, addr, &free_hash);
if (!new)
goto out_remove;
entry->direct = addr;
}
}
Where ftrace_add_rec_direct() has:
if (ftrace_hash_empty(direct_functions) ||
direct_functions->count > 2 * (1 << direct_functions->size_bits)) {
struct ftrace_hash *new_hash;
int size = ftrace_hash_empty(direct_functions) ? 0 :
direct_functions->count + 1;
if (size < 32)
size = 32;
new_hash = dup_hash(direct_functions, size);
if (!new_hash)
return NULL;
*free_hash = direct_functions;
direct_functions = new_hash;
}
The "*free_hash = direct_functions;" can happen twice, losing the previous
allocation of direct_functions.
But this also exposed a more serious bug.
The modification of direct_functions above is not safe. As
direct_functions can be referenced at any time to find what direct caller
it should call, the time between:
new_hash = dup_hash(direct_functions, size);
and
direct_functions = new_hash;
can have a race with another CPU (or even this one if it gets interrupted),
and the entries being moved to the new hash are not referenced.
That's because the "dup_hash()" is really misnamed and is really a
"move_hash()". It moves the entries from the old hash to the new one.
Now even if that was changed, this code is not proper as direct_functions
should not be updated until the end. That is the best way to handle
function reference changes, and is the way other parts of ftrace handles
this.
The following is done:
1. Change add_hash_entry() to return the entry it created and inserted
into the hash, and not just return success or not.
2. Replace ftrace_add_rec_direct() with add_hash_entry(), and remove
the former.
3. Allocate a "new_hash" at the start that is made for holding both the
new hash entries as well as the existing entries in direct_functions.
4. Copy (not move) the direct_function entries over to the new_hash.
5. Copy the entries of the added hash to the new_hash.
6. If everything succeeds, then use rcu_pointer_assign() to update the
direct_functions with the new_hash.
This simplifies the code and fixes both the memory leak as well as the
race condition mentioned above.
Link: https://lore.kernel.org/all/170368070504.42064.8960569647118388081.stgit@devnote2/
Link: https://lore.kernel.org/linux-trace-kernel/20231229115134.08dd5174@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: 763e34e74bb7d ("ftrace: Add register_ftrace_direct()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The HP Pavilion 14 ec1xxx series uses the HP mainboard 8A0F with the
ALC287 codec.
The mute led can be enabled using the already existing
ALC287_FIXUP_HP_GPIO_LED quirk.
Tested on an HP Pavilion ec1003AU
Signed-off-by: Aabish Malik <aabishmalik3337@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231229170352.742261-3-aabishmalik3337@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Under heavy traffic, the BlueField Gigabit interface can
become unresponsive. This is due to a possible race condition
in the mlxbf_gige_rx_packet function, where the function exits
with producer and consumer indices equal but there are remaining
packet(s) to be processed. In order to prevent this situation,
read receive consumer index *before* the HW replenish so that
the mlxbf_gige_rx_packet function returns an accurate return
value even if a packet is received into just-replenished buffer
prior to exiting this routine. If the just-replenished buffer
is received and occupies the last RX ring entry, the interface
would not recover and instead would encounter RX packet drops
related to internal buffer shortages since the driver RX logic
is not being triggered to drain the RX ring. This patch will
address and prevent this "ring full" condition.
Fixes: f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-12-20
mlx5 Socket direct support and management PF profile.
Tariq Says:
===========
Support Socket-Direct multi-dev netdev
This series adds support for combining multiple devices (PFs) of the
same port under one netdev instance. Passing traffic through different
devices belonging to different NUMA sockets saves cross-numa traffic and
allows apps running on the same netdev from different numas to still
feel a sense of proximity to the device and achieve improved
performance.
We achieve this by grouping PFs together, and creating the netdev only
once all group members are probed. Symmetrically, we destroy the netdev
once any of the PFs is removed.
The channels are distributed between all devices, a proper configuration
would utilize the correct close numa when working on a certain app/cpu.
We pick one device to be a primary (leader), and it fills a special
role. The other devices (secondaries) are disconnected from the network
in the chip level (set to silent mode). All RX/TX traffic is steered
through the primary to/from the secondaries.
Currently, we limit the support to PFs only, and up to two devices
(sockets).
===========
Armen Says:
===========
Management PF support and module integration
This patch rolls out comprehensive support for the Management Physical
Function (MGMT PF) within the mlx5 driver. It involves updating the
mlx5 interface header to introduce necessary definitions for MGMT PF
and adding a new management PF netdev profile, which will allow the host
side to communicate with the embedded linux on Blue-field devices.
===========
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- Andy steps down as GPIO reviewer
- Kent becomes a reviewer for GPIO uAPI
- add missing intel file to the relevant MAINTAINERS section
* tag 'gpio-fixes-for-v6.7-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: Add a missing file to the INTEL GPIO section
MAINTAINERS: Remove Andy from GPIO maintainers
MAINTAINERS: split out the uAPI into a new section
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- Intel PMC GBE LTR regression
- P2SB / PCI deadlock fix
* tag 'platform-drivers-x86-v6.7-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/pmc: Move GBE LTR ignore to suspend callback
platform/x86/intel/pmc: Allow reenabling LTRs
platform/x86/intel/pmc: Add suspend callback
platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
|
|
Pull block fixes from Jens Axboe:
"Fix for a badly numbered flag, and a regression fix for the badblocks
updates from this merge window"
* tag 'block-6.7-2023-12-29' of git://git.kernel.dk/linux:
block: renumber QUEUE_FLAG_HW_WC
badblocks: avoid checking invalid range in badblocks_check()
|
|
AUD_PAD_TOP widget's correct register is AFE_AUD_PAD_TOP , and not zero.
Having a zero as register, it would mean that the `snd_soc_dapm_new_widgets`
would try to read the register at offset zero when trying to get the power
status of this widget, which is incorrect.
Fixes: b65c466220b3 ("ASoC: mediatek: mt8186: support adda in platform driver")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Link: https://lore.kernel.org/r/20231229114342.195867-1-eugen.hristev@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add missing conversion from little-endian data to CPU-endian in
scarlett2_usb_get_meter_levels().
Fixes: 3473185f31df ("ALSA: scarlett2: Remap Level Meter values")
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/ZYsBIE3DSKdi4YC/@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If an application blocks on the snapshot or snapshot_raw files, expecting
to be woken up when a snapshot occurs, it will not happen. Or it may
happen with an unexpected result.
That result is that the application will be reading the main buffer
instead of the snapshot buffer. That is because when the snapshot occurs,
the main and snapshot buffers are swapped. But the reader has a descriptor
still pointing to the buffer that it originally connected to.
This is fine for the main buffer readers, as they may be blocked waiting
for a watermark to be hit, and when a snapshot occurs, the data that the
main readers want is now on the snapshot buffer.
But for waiters of the snapshot buffer, they are waiting for an event to
occur that will trigger the snapshot and they can then consume it quickly
to save the snapshot before the next snapshot occurs. But to do this, they
need to read the new snapshot buffer, not the old one that is now
receiving new data.
Also, it does not make sense to have a watermark "buffer_percent" on the
snapshot buffer, as the snapshot buffer is static and does not receive new
data except all at once.
Link: https://lore.kernel.org/linux-trace-kernel/20231228095149.77f5b45d@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: debdd57f5145f ("tracing: Make a snapshot feature available from userspace")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The tracefs file "buffer_percent" is to allow user space to set a
water-mark on how much of the tracing ring buffer needs to be filled in
order to wake up a blocked reader.
0 - is to wait until any data is in the buffer
1 - is to wait for 1% of the sub buffers to be filled
50 - would be half of the sub buffers are filled with data
100 - is not to wake the waiter until the ring buffer is completely full
Unfortunately the test for being full was:
dirty = ring_buffer_nr_dirty_pages(buffer, cpu);
return (dirty * 100) > (full * nr_pages);
Where "full" is the value for "buffer_percent".
There is two issues with the above when full == 100.
1. dirty * 100 > 100 * nr_pages will never be true
That is, the above is basically saying that if the user sets
buffer_percent to 100, more pages need to be dirty than exist in the
ring buffer!
2. The page that the writer is on is never considered dirty, as dirty
pages are only those that are full. When the writer goes to a new
sub-buffer, it clears the contents of that sub-buffer.
That is, even if the check was ">=" it would still not be equal as the
most pages that can be considered "dirty" is nr_pages - 1.
To fix this, add one to dirty and use ">=" in the compare.
Link: https://lore.kernel.org/linux-trace-kernel/20231226125902.4a057f1d@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: 03329f9939781 ("tracing: Add tracefs file buffer_percentage")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Commit 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and
core_configure()") caused a network performance regression due to the GBE
LTR ignore that it added at probe. This was needed in order to allow the
SoC to enter the deepest Package C state. To fix the regression and at
least support PC10 during suspend, move the LTR ignore from probe to the
suspend callback, and enable it again on resume. This solution will allow
PC10 during suspend but restrict Package C entry at runtime to no deeper
than PC8/9 while a network cable it attach to the PCH LAN.
Fixes: 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-6-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Commit 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and
core_configure()") caused a network performance regression due to the GBE
LTR ignore that it added during probe. The fix will move the ignore to
occur at suspend-time (so as to not affect suspend power). This will
require the ability to enable the LTR again on resume. Modify
pmc_core_send_ltr_ignore() to allow enabling an LTR.
Fixes: 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-5-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add a suspend callback to struct pmc for performing platform specific tasks
before device suspend. This is needed in order to perform GBE LTR ignore on
certain platforms at suspend-time instead of at probe-time and replace the
GBE LTR ignore removal that was done in order to fix a bug introduced by
commit 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and
core_configure()").
Fixes: 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()")
Signed-off-by: "David E. Box" <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20231223032548.1680738-4-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
p2sb_bar() unhides P2SB device to get resources from the device. It
guards the operation by locking pci_rescan_remove_lock so that parallel
rescans do not find the P2SB device. However, this lock causes deadlock
when PCI bus rescan is triggered by /sys/bus/pci/rescan. The rescan
locks pci_rescan_remove_lock and probes PCI devices. When PCI devices
call p2sb_bar() during probe, it locks pci_rescan_remove_lock again.
Hence the deadlock.
To avoid the deadlock, do not lock pci_rescan_remove_lock in p2sb_bar().
Instead, do the lock at fs_initcall. Introduce p2sb_cache_resources()
for fs_initcall which gets and caches the P2SB resources. At p2sb_bar(),
refer the cache and return to the caller.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 9745fb07474f ("platform/x86/intel: Add Primary to Sideband (P2SB) bridge support")
Cc: stable@vger.kernel.org
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/linux-pci/6xb24fjmptxxn5js2fjrrddjae6twex5bjaftwqsuawuqqqydx@7cl3uik5ef6j/
Link: https://lore.kernel.org/r/20231229063912.2517922-2-shinichiro.kawasaki@wdc.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Remove sound controls in hda_unbind to make
module loadable after module unload.
Add a driver specific struct (tas2781_hda) to store
the controls.
This patch depends on patch:
ALSA: hda/tas2781: do not use regcache
Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/362aa3e2f81b9259a3e5222f576bec5debfc5e88.1703204848.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
allow driver specific driver data in tas2781-hda-i2c and tas2781-i2c
Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/1398bd8bf3e935b1595a99128320e4a1913e210a.1703204848.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Correct typos.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/ead5609d63e71e8e87c13e1767decca5b272d696.1703203812.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There are two problems with using regcache in this module.
The amplifier has 3 addressing levels (BOOK, PAGE, REG). The firmware
contains blocks that must be written to BOOK 0x8C. The regcache doesn't
know anything about BOOK, so regcache_sync writes invalid values to the
actual BOOK.
The module handles 2 or more separate amplifiers. The amplifiers have
different register values, and the module uses only one regmap/regcache
for all the amplifiers. The regcache_sync only writes the last amplifier
used.
The module successfully restores all the written register values (RC
profile, program, configuration, calibration) without regcache.
Remove regcache functions and set regmap cache_type to REGCACHE_NONE.
Link: https://lore.kernel.org/r/21a183b5a08cb23b193af78d4b1114cc59419272.1701906455.git.soyer@irl.hu/
Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Acked-by: Mark Brown <broonie@kernel.org>
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/491aeed0e2eecc3b704ec856f815db21bad3ba0e.1703202126.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
As explained in commit e03781879a0d ("drop_monitor: Require
'CAP_SYS_ADMIN' when joining "events" group"), the "flags" field in the
multicast group structure reuses uAPI flags despite the field not being
exposed to user space. This makes it impossible to extend its use
without adding new uAPI flags, which is inappropriate for internal
kernel checks.
Solve this by adding internal flags (i.e., "GENL_MCAST_*") and convert
the existing users to use them instead of the uAPI flags.
Tested using the reproducers in commit 44ec98ea5ea9 ("psample: Require
'CAP_NET_ADMIN' when joining "packets" group") and commit e03781879a0d
("drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group").
No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When unregistering the DPLL subsystem the priv pointer is different then
the one used for registration which cause failure in unregistering.
Fixes: 09eeb3aecc6c ("ptp_ocp: implement DPLL ops")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablu Neira Syuso says:
====================
netfilter pull request 23-12-20
The following patchset contains Netfilter fixes for net:
1) Skip set commit for deleted/destroyed sets, this might trigger
double deactivation of expired elements.
2) Fix packet mangling from egress, set transport offset from
mac header for netdev/egress.
Both fixes address bugs already present in several releases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the iucv_bus variable to be a constant structure as well, placing
it into read-only memory which can not be modified at runtime.
Cc: Wenjia Zhang <wenjia@linux.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-s390@vger.kernel.org
Cc: netdev@vger.kernel.org
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is error message when defer probe happens:
fsl_rpmsg rpmsg_audio: Unbalanced pm_runtime_enable!
Fix the error handler with pm_runtime_enable.
Fixes: b73d9e6225e8 ("ASoC: fsl_rpmsg: Add CPU DAI driver for audio base on rpmsg")
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20231225080608.967953-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The kerneldoc comment for struct ethtool_fec_stats attempts to describe the
"total" and "lanes" fields of the ethtool_fec_stat substructure in a way
leading to these warnings:
./include/linux/ethtool.h:424: warning: Excess struct member 'lane' description in 'ethtool_fec_stats'
./include/linux/ethtool.h:424: warning: Excess struct member 'total' description in 'ethtool_fec_stats'
Reformat the comment to retain the information while eliminating the
warnings.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The kernel doc comments for struct ethtool_link_settings includes
documentation for three fields that were never present there, leading to
these docs-build warnings:
./include/uapi/linux/ethtool.h:2207: warning: Excess struct member 'supported' description in 'ethtool_link_settings'
./include/uapi/linux/ethtool.h:2207: warning: Excess struct member 'advertising' description in 'ethtool_link_settings'
./include/uapi/linux/ethtool.h:2207: warning: Excess struct member 'lp_advertising' description in 'ethtool_link_settings'
Remove the entries to make the warnings go away. There was some
information there on how data in >link_mode_masks is formatted; move that
to the body of the comment to preserve it.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove a couple of kerneldoc entries for struct members that do not exist,
addressing these warnings:
./include/net/sock.h:548: warning: Excess struct member '__sk_flags_offset' description in 'sock'
./include/net/sock.h:548: warning: Excess struct member 'sk_padding' description in 'sock'
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull ksmbd server fix from Steve French:
- address possible slab out of bounds in parsing of open requests
* tag '6.7rc7-smb3-srv-fix' of git://git.samba.org/ksmbd:
ksmbd: fix slab-out-of-bounds in smb_strndup_from_utf16()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Revive proper alignment for the ksymtab and kcrctab sections
- Fix gen_compile_commands.py tool to resolve symbolic links
- Fix symbolic links to installed debug VDSO files
- Update MAINTAINERS
* tag 'kbuild-fixes-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
linux/export: Ensure natural alignment of kcrctab array
kbuild: fix build ID symlinks to installed debug VDSO files
gen_compile_commands.py: fix path resolve with symlinks in it
MAINTAINERS: Add scripts/clang-tools to Kbuild section
linux/export: Fix alignment for 64-bit ksymtab entries
|
|
Pull bcachefs fixes from Kent Overstreet:
"Just a few fixes: besides a few one liners, we have a fix for
snapshots + compression where the extent update path didn't account
for the fact that with snapshots, we might split an existing extent
into three, not just two; and a small fixup for promotes which were
broken by the recent changes in the data update path to correctly take
into account device durability"
* tag 'bcachefs-2023-12-27' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Fix promotes
bcachefs: Fix leakage of internal error code
bcachefs: Fix insufficient disk reservation with compression + snapshots
bcachefs: fix BCH_FSCK_ERR enum
|
|
The ___kcrctab section holds an array of 32-bit CRC values.
Add a .balign 4 to tell the linker the correct memory alignment.
Fixes: f3304ecd7f06 ("linux/export: use inline assembler to populate symbol CRCs")
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
If ->NameOffset/Length is bigger than ->CreateContextsOffset/Length,
ksmbd_check_message doesn't validate request buffer it correctly.
So slab-out-of-bounds warning from calling smb_strndup_from_utf16()
in smb2_open() could happen. If ->NameLength is non-zero, Set the larger
of the two sums (Name and CreateContext size) as the offset and length of
the data area.
Reported-by: Yang Chaoming <lometsj@live.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"11 hotfixes. 7 are cc:stable and the other 4 address post-6.6 issues
or are not considered backporting material"
* tag 'mm-hotfixes-stable-2023-12-27-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add an old address for Naoya Horiguchi
mm/memory-failure: cast index to loff_t before shifting it
mm/memory-failure: check the mapcount of the precise page
mm/memory-failure: pass the folio and the page to collect_procs()
selftests: secretmem: floor the memory size to the multiple of page_size
mm: migrate high-order folios in swap cache correctly
maple_tree: do not preallocate nodes for slot stores
mm/filemap: avoid buffered read/write race to read inconsistent data
kunit: kasan_test: disable fortify string checker on kmalloc_oob_memset
kexec: select CRYPTO from KEXEC_FILE instead of depending on it
kexec: fix KEXEC_FILE dependencies
|
|
Currently the driver accepts VLAN EtherType steering rules regardless of
the configured mask. And things might fail silently or with confusing error
messages to the user. The VLAN EtherType can only be matched by full
mask. Therefore, add a check for that.
For instance the following rule is invalid, but the driver accepts it and
ignores the user specified mask:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \
| m 0x00ff action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
| Flow Type: Raw Ethernet
| Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Ethertype: 0x0 mask: 0xFFFF
| VLAN EtherType: 0x8100 mask: 0x0
| VLAN: 0x0 mask: 0xffff
| User-defined: 0x0 mask: 0xffffffffffffffff
| Action: Direct to queue 0
After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \
| m 0x00ff action 0
|rmgr: Cannot insert RX class rule: Operation not supported
Fixes: 2b477d057e33 ("igc: Integrate flex filter into ethtool ops")
Suggested-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently the driver accepts VLAN TCI steering rules regardless of the
configured mask. And things might fail silently or with confusing error
messages to the user.
There are two ways to handle the VLAN TCI mask:
1. Match on the PCP field using a VLAN prio filter
2. Match on complete TCI field using a flex filter
Therefore, add checks and code for that.
For instance the following rule is invalid and will be converted into a
VLAN prio rule which is not correct:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \
| action 1
|Added rule with ID 61
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 61
| Flow Type: Raw Ethernet
| Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Ethertype: 0x0 mask: 0xFFFF
| VLAN EtherType: 0x0 mask: 0xffff
| VLAN: 0x1 mask: 0x1fff
| User-defined: 0x0 mask: 0xffffffffffffffff
| Action: Direct to queue 1
After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \
| action 1
|rmgr: Cannot insert RX class rule: Operation not supported
Fixes: 7991487ecb2d ("igc: Allow for Flex Filters to be installed")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently the driver allows to configure matching by VLAN EtherType.
However, the retrieval function does not report it back to the user. Add
it.
Before:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
| Flow Type: Raw Ethernet
| Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Ethertype: 0x0 mask: 0xFFFF
| Action: Direct to queue 0
After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
| Flow Type: Raw Ethernet
| Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Ethertype: 0x0 mask: 0xFFFF
| VLAN EtherType: 0x8100 mask: 0x0
| VLAN: 0x0 mask: 0xffff
| User-defined: 0x0 mask: 0xffffffffffffffff
| Action: Direct to queue 0
Fixes: 2b477d057e33 ("igc: Integrate flex filter into ethtool ops")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Prevent VF from configuring filters with unsupported actions or use
REDIRECT action with invalid tc number. Current checks could cause
out of bounds access on PF side.
Fixes: e284fc280473 ("i40e: Add and delete cloud filter")
Reviewed-by: Andrii Staikov <andrii.staikov@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Stop dividing the phase_offset value received from firmware. This fault
is present since the initial implementation.
The phase_offset value received from firmware is in 0.01ps resolution.
Dpll subsystem is using the value in 0.001ps, raw value is adjusted
before providing it to the user.
The user can observe the value of phase offset with response to
`pin-get` netlink message of dpll subsystem for an active pin:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
--do pin-get --json '{"id":2}'
Where example of correct response would be:
{'board-label': 'C827_0-RCLKA',
'capabilities': 6,
'clock-id': 4658613174691613800,
'frequency': 1953125,
'id': 2,
'module-name': 'ice',
'parent-device': [{'direction': 'input',
'parent-id': 6,
'phase-offset': -216839550,
'prio': 9,
'state': 'connected'},
{'direction': 'input',
'parent-id': 7,
'phase-offset': -42930,
'prio': 8,
'state': 'connected'}],
'phase-adjust': 0,
'phase-adjust-max': 16723,
'phase-adjust-min': -16723,
'type': 'mux'}
Provided phase-offset value (-42930) shall be divided by the user with
DPLL_PHASE_OFFSET_DIVIDER to get actual value of -42.930 ps.
Before the fix, the response was not correct:
{'board-label': 'C827_0-RCLKA',
'capabilities': 6,
'clock-id': 4658613174691613800,
'frequency': 1953125,
'id': 2,
'module-name': 'ice',
'parent-device': [{'direction': 'input',
'parent-id': 6,
'phase-offset': -216839,
'prio': 9,
'state': 'connected'},
{'direction': 'input',
'parent-id': 7,
'phase-offset': -42,
'prio': 8,
'state': 'connected'}],
'phase-adjust': 0,
'phase-adjust-max': 16723,
'phase-adjust-min': -16723,
'type': 'mux'}
Where phase-offset value (-42), after division
(DPLL_PHASE_OFFSET_DIVIDER) would be: -0.042 ps.
Fixes: 8a3a565ff210 ("ice: add admin commands to access cgu configuration")
Fixes: 90e1c90750d7 ("ice: dpll: implement phase related callbacks")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Disabling netdev with ethtool private flag "link-down-on-close" enabled
can cause NULL pointer dereference bug. Shut down VSI regardless of
"link-down-on-close" state.
Fixes: 8ac7132704f3 ("ice: Fix interface being down after reset with link-down-on-close flag on")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The driver should not report an error message when for a medialess port
the link_down_on_close flag is enabled and the physical link cannot be
set down.
Fixes: 8ac7132704f3 ("ice: Fix interface being down after reset with link-down-on-close flag on")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Katarzyna Wieczerzycka <katarzyna.wieczerzycka@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When gpio-tangier was split the new born headers had been missed
in the MAINTAINERS. Add it there.
Fixes: d2c19e89e03c ("gpio: tangier: Introduce Intel Tangier GPIO driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Too many things are going on, and reviewing GPIO related code
seems not the best I can do, hence I step down as a reviewer of
the GPIO subsystem.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
