| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
ACS (auto PAD/FCS stripping) removes FCS off 802.3 packets (LLC) so that
there is no need to manually strip it for such packets. The enhanced DMA
descriptors allow to flag LLC packets so that the receiving callback can
use that to strip FCS manually or not. On the other hand, normal
descriptors do not support that.
Thus in order to not truncate LLC packet ACS should be disabled when
using normal DMA descriptors.
Fixes: 47dd7a540b8a0 ("net: add support for STMicroelectronics Ethernet controllers.")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot found an interesting case of the kernel reading
an uninit-value [1]
Problem is in the handling of ETH_P_WCCP in gre_parse_header()
We look at the byte following GRE options to eventually decide
if the options are four bytes longer.
Use skb_header_pointer() to not pull bytes if we found
that no more bytes were needed.
All callers of gre_parse_header() are properly using pskb_may_pull()
anyway before proceeding to next header.
[1]
BUG: KMSAN: uninit-value in pskb_may_pull include/linux/skbuff.h:2303 [inline]
BUG: KMSAN: uninit-value in __iptunnel_pull_header+0x30c/0xbd0 net/ipv4/ip_tunnel_core.c:94
CPU: 1 PID: 11784 Comm: syz-executor940 Not tainted 5.6.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1c9/0x220 lib/dump_stack.c:118
kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
__msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
pskb_may_pull include/linux/skbuff.h:2303 [inline]
__iptunnel_pull_header+0x30c/0xbd0 net/ipv4/ip_tunnel_core.c:94
iptunnel_pull_header include/net/ip_tunnels.h:411 [inline]
gre_rcv+0x15e/0x19c0 net/ipv6/ip6_gre.c:606
ip6_protocol_deliver_rcu+0x181b/0x22c0 net/ipv6/ip6_input.c:432
ip6_input_finish net/ipv6/ip6_input.c:473 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
ip6_input net/ipv6/ip6_input.c:482 [inline]
ip6_mc_input+0xdf2/0x1460 net/ipv6/ip6_input.c:576
dst_input include/net/dst.h:442 [inline]
ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
ipv6_rcv+0x683/0x710 net/ipv6/ip6_input.c:306
__netif_receive_skb_one_core net/core/dev.c:5198 [inline]
__netif_receive_skb net/core/dev.c:5312 [inline]
netif_receive_skb_internal net/core/dev.c:5402 [inline]
netif_receive_skb+0x66b/0xf20 net/core/dev.c:5461
tun_rx_batched include/linux/skbuff.h:4321 [inline]
tun_get_user+0x6aef/0x6f60 drivers/net/tun.c:1997
tun_chr_write_iter+0x1f2/0x360 drivers/net/tun.c:2026
call_write_iter include/linux/fs.h:1901 [inline]
new_sync_write fs/read_write.c:483 [inline]
__vfs_write+0xa5a/0xca0 fs/read_write.c:496
vfs_write+0x44a/0x8f0 fs/read_write.c:558
ksys_write+0x267/0x450 fs/read_write.c:611
__do_sys_write fs/read_write.c:623 [inline]
__se_sys_write fs/read_write.c:620 [inline]
__ia32_sys_write+0xdb/0x120 fs/read_write.c:620
do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline]
do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410
entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139
RIP: 0023:0xf7f62d99
Code: 90 e8 0b 00 00 00 f3 90 0f ae e8 eb f9 8d 74 26 00 89 3c 24 c3 90 90 90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 002b:00000000fffedb2c EFLAGS: 00000217 ORIG_RAX: 0000000000000004
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000020002580
RDX: 0000000000000fca RSI: 0000000000000036 RDI: 0000000000000004
RBP: 0000000000008914 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline]
kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127
kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82
slab_alloc_node mm/slub.c:2793 [inline]
__kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4401
__kmalloc_reserve net/core/skbuff.c:142 [inline]
__alloc_skb+0x2fd/0xac0 net/core/skbuff.c:210
alloc_skb include/linux/skbuff.h:1051 [inline]
alloc_skb_with_frags+0x18c/0xa70 net/core/skbuff.c:5766
sock_alloc_send_pskb+0xada/0xc60 net/core/sock.c:2242
tun_alloc_skb drivers/net/tun.c:1529 [inline]
tun_get_user+0x10ae/0x6f60 drivers/net/tun.c:1843
tun_chr_write_iter+0x1f2/0x360 drivers/net/tun.c:2026
call_write_iter include/linux/fs.h:1901 [inline]
new_sync_write fs/read_write.c:483 [inline]
__vfs_write+0xa5a/0xca0 fs/read_write.c:496
vfs_write+0x44a/0x8f0 fs/read_write.c:558
ksys_write+0x267/0x450 fs/read_write.c:611
__do_sys_write fs/read_write.c:623 [inline]
__se_sys_write fs/read_write.c:620 [inline]
__ia32_sys_write+0xdb/0x120 fs/read_write.c:620
do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline]
do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410
entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139
Fixes: 95f5c64c3c13 ("gre: Move utility functions to common headers")
Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Taehee Yoo says:
====================
bareudp: several code cleanup for bareudp module
This patchset is to cleanup bareudp module code.
1. The first patch is to add module alias
In the current bareudp code, there is no module alias.
So, RTNL couldn't load bareudp module automatically.
2. The second patch is to add extack message.
The extack error message is useful for noticing specific errors
when command is failed.
3. The third patch is to remove unnecessary udp_encap_enable().
In the bareudp_socket_create(), udp_encap_enable() is called.
But, the it's already called in the setup_udp_tunnel_sock().
So, it could be removed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the current code, udp_encap_enable() is called in
bareudp_socket_create().
But, setup_udp_tunnel_sock() internally calls udp_encap_enable().
So, udp_encap_enable() is unnecessary.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When bareudp netlink command fails, it doesn't print any error message.
So, users couldn't know the exact reason.
In order to tell the exact reason to the user, the extack error message
is used in this patch.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the current bareudp code, there is no module alias.
So, RTNL couldn't load bareudp module automatically.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rohit Maheshwari says:
====================
cxgb4/chcr: ktls tx ofld support on T6 adapter
This series of patches add support for kernel tls offload in Tx direction,
over Chelsio T6 NICs. SKBs marked as decrypted will be treated as tls plain
text packets and then offloaded to encrypt using network device (chelsio T6
adapter).
This series is broken down as follows:
Patch 1 defines a new macro and registers tls_dev_add and tls_dev_del
callbacks. When tls_dev_add gets called we send a connection request to
our hardware and to make HW understand about tls offload. Its a partial
connection setup and only ipv4 part is done.
Patch 2 handles the HW response of the connection request and then we
request to update TCB and handle it's HW response as well. Also we save
crypto key locally. Only supporting TLS_CIPHER_AES_GCM_128_KEY_SIZE.
Patch 3 handles tls marked skbs (decrypted bit set) and sends it to ULD for
crypto handling. This code has a minimal portion of tx handler, to handle
only one complete record per skb.
Patch 4 hanldes partial end part of records. Also added logic to handle
multiple records in one single skb. It also adds support to send out tcp
option(/s) if exists in skb. If a record is partial but has end part of a
record, we'll fetch complete record and then only send it to HW to generate
HASH on complete record.
Patch 5 handles partial first or middle part of record, it uses AES_CTR to
encrypt the partial record. If we are trying to send middle record, it's
start should be 16 byte aligned, so we'll fetch few earlier bytes from the
record and then send it to HW for encryption.
Patch 6 enables ipv6 support and also includes ktls startistics.
v1->v2:
- mark tcb state to close in tls_dev_del.
- u_ctx is now picked from adapter structure.
- clear atid in case of failure.
- corrected ULP_CRYPTO_KTLS_INLINE value.
- optimized tcb update using control queue.
- state machine handling when earlier states received.
- chcr_write_cpl_set_tcb_ulp function is shifted to patch3.
- un-necessary updating left variable.
v2->v3:
- add empty line after variable declaration.
- local variable declaration in reverse christmas tree ordering.
v3->v4:
- replaced kfree_skb with dev_kfree_skb_any.
- corrected error message reported by kbuild test robot <lkp@intel.com>
- mss calculation logic.
- correct place for Alloc skb check.
- Replaced atomic_t with atomic64_t
- added few more statistics counters.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adding ipv6 support and ktls related statistics.
v1->v2:
- added blank lines at 2 places.
v3->v4:
- Replaced atomic_t with atomic64_t
- added few necessary stat counters.
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch contains handling of first part or middle part of the record.
When we get a middle record, we will fetch few already sent bytes to
make packet start 16 byte aligned.
And if the packet has only the header part, we don't need to send it for
packet encryption, send that packet as a plaintext.
v1->v2:
- un-necessary updating left variable.
v3->v4:
- replaced kfree_skb with dev_kfree_skb_any.
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TCP segment can chop a record in any order. Record can either be
complete or it can be partial (first part which contains header,
middle part which doesn't have header or TAG, and the end part
which contains TAG. This patch handles partial end part of a tx
record. In case of partial end part's, driver will send complete
record to HW, so that HW will calculate GHASH (TAG) of complete
packet.
Also added support to handle multiple records in a segment.
v1->v2:
- miner change in calling chcr_write_cpl_set_tcb_ulp.
- no need of checking return value of chcr_ktls_write_tcp_options.
v3->v4:
- replaced kfree_skb with dev_kfree_skb_any.
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Added tx handling in this patch. This includes handling of segments
contain single complete record.
v1->v2:
- chcr_write_cpl_set_tcb_ulp is added in this patch.
v3->v4:
- mss calculation logic.
- replaced kfree_skb with dev_kfree_skb_any.
- corrected error message reported by kbuild test robot <lkp@intel.com>
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As part of this patch generated and saved crypto keys, handled HW
response of act_open_req and set_tcb_req. Defined connection state
update.
v1->v2:
- optimized tcb update using control queue.
- state machine handling when earlier states received.
v2->v3:
- Added one empty line after function declaration.
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A new macro is defined to enable ktls tx offload support on Chelsio
T6 adapter. And if this macro is enabled, cxgb4 will send mailbox to
enable or disable ktls settings on HW.
In chcr, enabled tx offload flag in netdev and registered tls_dev_add
and tls_dev_del.
v1->v2:
- mark tcb state to close in tls_dev_del.
- u_ctx is now picked from adapter structure.
- clear atid in case of failure.
- corrected ULP_CRYPTO_KTLS_INLINE value.
v2->v3:
- add empty line after variable declaration.
- local variable declaration in reverse christmas tree ordering.
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a problem when ipvlan slaves are created on a master device that
is a vmxnet3 device (ipvlan in VMware guests). The vmxnet3 driver does not
support unicast address filtering. When an ipvlan device is brought up in
ipvlan_open(), the ipvlan driver calls dev_uc_add() to add the hardware
address of the vmxnet3 master device to the unicast address list of the
master device, phy_dev->uc. This inevitably leads to the vmxnet3 master
device being forced into promiscuous mode by __dev_set_rx_mode().
Promiscuous mode is switched on the master despite the fact that there is
still only one hardware address that the master device should use for
filtering in order for the ipvlan device to be able to receive packets.
The comment above struct net_device describes the uc_promisc member as a
"counter, that indicates, that promiscuous mode has been enabled due to
the need to listen to additional unicast addresses in a device that does
not implement ndo_set_rx_mode()". Moreover, the design of ipvlan
guarantees that only the hardware address of a master device,
phy_dev->dev_addr, will be used to transmit and receive all packets from
its ipvlan slaves. Thus, the unicast address list of the master device
should not be modified by ipvlan_open() and ipvlan_stop() in order to make
ipvlan a workable option on masters that do not support unicast address
filtering.
Fixes: 2ad7bf3638411 ("ipvlan: Initial check-in of the IPVLAN driver")
Reported-by: Per Sundstrom <per.sundstrom@redqube.se>
Signed-off-by: Jiri Wiesner <jwiesner@suse.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jiri Pirko says:
====================
net: allow user specify TC action HW stats type
Currently, when user adds a TC action and the action gets offloaded,
the user expects the HW stats to be counted and included in stats dump.
However, since drivers may implement different types of counting, there
is no way to specify which one the user is interested in.
For example for mlx5, only delayed counters are available as the driver
periodically polls for updated stats.
In case of mlxsw, the counters are queried on dump time. However, the
HW resources for this type of counters is quite limited (couple of
thousands). This limits the amount of supported offloaded filters
significantly. Without counter assigned, the HW is capable to carry
millions of those.
On top of that, mlxsw HW is able to support delayed counters as well in
greater numbers. That is going to be added in a follow-up patch.
This patchset allows user to specify one of the following types of HW
stats for added action:
immediate - queried during dump time
delayed - polled from HW periodically or sent by HW in async manner
disabled - no stats needed
Note that if "hw_stats" option is not passed, user does not care about
the type, just expects any type of stats.
Examples:
$ tc filter add dev enp0s16np28 ingress proto ip handle 1 pref 1 flower skip_sw dst_ip 192.168.1.1 action drop hw_stats disabled
$ tc -s filter show dev enp0s16np28 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
dst_ip 192.168.1.1
skip_sw
in_hw in_hw_count 2
action order 1: gact action drop
random type none pass val 0
index 1 ref 1 bind 1 installed 7 sec used 2 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
hw_stats disabled
$ tc filter add dev enp0s16np28 ingress proto ip handle 1 pref 1 flower skip_sw dst_ip 192.168.1.1 action drop hw_stats immediate
$ tc -s filter show dev enp0s16np28 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
dst_ip 192.168.1.1
skip_sw
in_hw in_hw_count 2
action order 1: gact action drop
random type none pass val 0
index 1 ref 1 bind 1 installed 11 sec used 4 sec
Action statistics:
Sent 102 bytes 1 pkt (dropped 1, overlimits 0 requeues 0)
Sent software 0 bytes 0 pkt
Sent hardware 102 bytes 1 pkt
backlog 0b 0p requeues 0
hw_stats immediate
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, user who is adding an action expects HW to report stats,
however it does not have exact expectations about the stats types.
That is aligned with TCA_ACT_HW_STATS_TYPE_ANY.
Allow user to specify the type of HW stats for an action and require it.
Pass the information down to flow_offload layer.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce new type for disabled HW stats and allow the value in
mlxsw offload.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set a flag in case rule counter was created. Only query the device for
stats of a rule, which has the valid counter assigned.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce new type for delayed HW stats and allow the value in
mlx5 offload.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce new type for immediate HW stats and allow the value in
mlxsw offload.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently don't allow actions with any other type to be inserted.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As there is one set of counters for the whole action chain, forbid to
mix the HW stats types.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce flow_action_basic_hw_stats_types_check() helper and use it
in drivers. That sanitizes the drivers which do not have support
for action HW stats types.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of directly checking number of action entries, use
flow_offload_has_one_action() helper.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Initially, pass "ANY" (struct is zeroed) to the drivers as that is the
current implicit value coming down to flow_offload. Add a bool
indicating that entries have mixed HW stats type.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"We've been accruing these for a couple of weeks, so the batch is a bit
bigger than usual.
Largest delta is due to a led-bl driver that is added -- there was a
miscommunication before the merge window and the driver didn't make it
in. Due to this, the platforms needing it regressed. At this point, it
seemed easier to add the new driver than unwind the changes.
Besides that, there are a handful of various fixes:
- AMD tee memory leak fix
- A handful of fixlets for i.MX SCU communication
- A few maintainers woke up and realized DEBUG_FS had been missing
for a while, so a few updates of that.
... and the usual collection of smaller fixes to various platforms"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (37 commits)
ARM: socfpga_defconfig: Add back DEBUG_FS
arm64: dts: socfpga: agilex: Fix gmac compatible
ARM: bcm2835_defconfig: Explicitly restore CONFIG_DEBUG_FS
arm64: dts: meson: fix gxm-khadas-vim2 wifi
arm64: dts: meson-sm1-sei610: add missing interrupt-names
ARM: meson: Drop unneeded select of COMMON_CLK
ARM: dts: bcm2711: Add pcie0 alias
ARM: dts: bcm283x: Add missing properties to the PWR LED
tee: amdtee: fix memory leak in amdtee_open_session()
ARM: OMAP2+: Fix compile if CONFIG_HAVE_ARM_SMCCC is not set
arm: dts: dra76x: Fix mmc3 max-frequency
ARM: dts: dra7: Add "dma-ranges" property to PCIe RC DT nodes
bus: ti-sysc: Fix 1-wire reset quirk
ARM: dts: r8a7779: Remove deprecated "renesas, rcar-sata" compatible value
soc: imx-scu: Align imx sc msg structs to 4
firmware: imx: Align imx_sc_msg_req_cpu_start to 4
firmware: imx: scu-pd: Align imx sc msg structs to 4
firmware: imx: misc: Align imx sc msg structs to 4
firmware: imx: scu: Ensure sequential TX
ARM: dts: imx7-colibri: Fix frequency for sd/mmc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
"Error reporting fix for synopsys_edac: do not overwrite partial
decoded error message (Sherry Sun)"
* tag 'edac_urgent-2020-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/synopsys: Do not print an error with back-to-back snprintf() calls
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are four small char/misc driver fixes for reported issues for
5.6-rc5.
These fixes are:
- binder fix for a potential use-after-free problem found (took two
tries to get it right)
- interconnect core fix
- altera-stapl driver fix
All four of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binder: prevent UAF for binderfs devices II
interconnect: Handle memory allocation errors
altera-stapl: altera_get_note: prevent write beyond end of 'key'
binder: prevent UAF for binderfs devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs fixes from Greg KH:
"Here are four small driver core / debugfs patches for 5.6-rc3:
- debugfs api cleanup now that all debugfs_create_regset32() callers
have been fixed up. This was waiting until after the -rc1 merge as
these fixes came in through different trees
- driver core sync state fixes based on reports of minor issues found
in the feature
All of these have been in linux-next with no reported issues"
* tag 'driver-core-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Skip unnecessary work when device doesn't have sync_state()
driver core: Add dev_has_sync_state()
driver core: Call sync_state() even if supplier has no consumers
debugfs: remove return value of debugfs_create_regset32()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty/serial fixes for 5.6-rc5
Just some small serial driver fixes, and a vt core fixup, full details
are:
- vt fixes for issues found by syzbot
- serdev fix for Apple boxes
- fsl_lpuart serial driver fixes
- MAINTAINER update for incorrect serial files
- new device ids for 8250_exar driver
- mvebu-uart fix
All of these have been in linux-next with no reported issues"
* tag 'tty-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: fsl_lpuart: free IDs allocated by IDA
Revert "tty: serial: fsl_lpuart: drop EARLYCON_DECLARE"
serdev: Fix detection of UART devices on Apple machines.
MAINTAINERS: Add missed files related to Synopsys DesignWare UART
serial: 8250_exar: add support for ACCES cards
tty:serial:mvebu-uart:fix a wrong return
vt: selection, push sel_lock up
vt: selection, push console lock down
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY fixes from Greg KH:
"Here are some small USB and PHY driver fixes for reported issues for
5.6-rc5.
Included in here are:
- phy driver fixes
- new USB quirks
- USB cdns3 gadget driver fixes
- USB hub core fixes
All of these have been in linux-next with no reported issues"
* tag 'usb-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: dwc3: gadget: Update chain bit correctly when using sg list
usb: core: port: do error out if usb_autopm_get_interface() fails
usb: core: hub: do error out if usb_autopm_get_interface() fails
usb: core: hub: fix unhandled return by employing a void function
usb: storage: Add quirk for Samsung Fit flash
usb: quirks: add NO_LPM quirk for Logitech Screen Share
usb: usb251xb: fix regulator probe and error handling
phy: allwinner: Fix GENMASK misuse
usb: cdns3: gadget: toggle cycle bit before reset endpoint
usb: cdns3: gadget: link trb should point to next request
phy: mapphone-mdm6600: Fix timeouts by adding wake-up handling
phy: brcm-sata: Correct MDIO operations for 40nm platforms
phy: ti: gmii-sel: do not fail in case of gmii
phy: ti: gmii-sel: fix set of copy-paste errors
phy: core: Fix phy_get() to not return error on link creation failure
phy: mapphone-mdm6600: Fix write timeouts with shorter GPIO toggle interval
|
|
Needn't call 'rfcomm_dlc_put' here, because 'rfcomm_dlc_exists' didn't
increase dlc->refcnt.
Reported-by: syzbot+4496e82090657320efc6@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Suggested-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Recent changes to alloc_pid() allow the pid number to be specified on
the command line. If set_tid_size is set, then the code scanning the
levels will hard-set retval to -EPERM, overriding it's previous -ENOMEM
value.
After the code scanning the levels, there are error returns that do not
set retval, assuming it is still set to -ENOMEM.
So set retval back to -ENOMEM after scanning the levels.
Fixes: 49cb2fc42ce4 ("fork: extend clone3() to support setting a PID")
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Adrian Reber <areber@redhat.com>
Cc: <stable@vger.kernel.org> # 5.5
Link: https://lore.kernel.org/r/20200306172314.12232-1-minyard@acm.org
[christian.brauner@ubuntu.com: fixup commit message]
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
Clang warns when CONFIG_BALLOON_COMPACTION is unset:
../drivers/virtio/virtio_balloon.c:963:1: warning: unused label
'out_del_vqs' [-Wunused-label]
out_del_vqs:
^~~~~~~~~~~~
1 warning generated.
Move the label within the preprocessor block since it is only used when
CONFIG_BALLOON_COMPACTION is set.
Fixes: 1ad6f58ea936 ("virtio_balloon: Fix memory leaks on errors in virtballoon_probe()")
Link: https://github.com/ClangBuiltLinux/linux/issues/886
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20200216004039.23464-1-natechancellor@gmail.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
|
|
Let's change the mapping between virtqueue_add errors to BLK_STS
statuses, so that -ENOSPC, which indicates virtqueue full is still
mapped to BLK_STS_DEV_RESOURCE, but -ENOMEM which indicates non-device
specific resource outage is mapped to BLK_STS_RESOURCE.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20200213123728.61216-3-pasic@linux.ibm.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Since nobody else is going to restart our hw_queue for us, the
blk_mq_start_stopped_hw_queues() is in virtblk_done() is not sufficient
necessarily sufficient to ensure that the queue will get started again.
In case of global resource outage (-ENOMEM because mapping failure,
because of swiotlb full) our virtqueue may be empty and we can get
stuck with a stopped hw_queue.
Let us not stop the queue on arbitrary errors, but only on -EONSPC which
indicates a full virtqueue, where the hw_queue is guaranteed to get
started by virtblk_done() before when it makes sense to carry on
submitting requests. Let us also remove a stale comment.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Fixes: f7728002c1c7 ("virtio_ring: fix return code on DMA mapping fails")
Link: https://lore.kernel.org/r/20200213123728.61216-2-pasic@linux.ibm.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The functions vring_new_virtqueue() and __vring_new_virtqueue() are used
with split rings, and any allocations within these functions are managed
outside of the .we_own_ring flag. The commit cbeedb72b97a ("virtio_ring:
allocate desc state for split ring separately") allocates the desc state
within the __vring_new_virtqueue() but frees it only when the .we_own_ring
flag is set. This leads to a memory leak when freeing such allocated
virtqueues with the vring_del_virtqueue() function.
Fix this by moving the desc_state free code outside the flag and only
for split rings. Issue was discovered during testing with remoteproc
and virtio_rpmsg.
Fixes: cbeedb72b97a ("virtio_ring: allocate desc state for split ring separately")
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20200224212643.30672-1-s-anna@ti.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
This should make it safe to have the code upstream without affecting
stable systems since there are a few details not sort out with ECRED
mode e.g: how to initiate multiple connections at once.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This adds the initial code for Enhanced Credit Based Mode which
introduces a new socket mode called L2CAP_MODE_EXT_FLOWCTL, which for
the most part work the same as L2CAP_MODE_LE_FLOWCTL but uses different
PDUs to setup the connections and also works over BR/EDR.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This introduces the definitions for the new L2CAP mode called Enhanced
Credit Based Mode.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Increment the mgmt revision due to the recently added setting and
command.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
|
|
This change introduces a wide band speech setting which allows higher
level clients to query the local controller support for wide band speech
as well as set the setting state when the radio is powered off.
Internally, this setting controls if erroneous data reporting is enabled
on the controller.
Signed-off-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This uses skb_pull when parsing signalling PDUs so skb->data for
pointing to the current PDU and skb->len as the remaining bytes to be
processed.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
After FS_IOC_REMOVE_ENCRYPTION_KEY removes a key, it syncs the
filesystem and tries to get and put all inodes that were unlocked by the
key so that unused inodes get evicted via fscrypt_drop_inode().
Normally, the inodes are all clean due to the sync.
However, after the filesystem is sync'ed, userspace can modify and close
one of the files. (Userspace is *supposed* to close the files before
removing the key. But it doesn't always happen, and the kernel can't
assume it.) This causes the inode to be dirtied and have i_count == 0.
Then, fscrypt_drop_inode() failed to consider this case and indicated
that the inode can be dropped, causing the write to be lost.
On f2fs, other problems such as a filesystem freeze could occur due to
the inode being freed while still on f2fs's dirty inode list.
Fix this bug by making fscrypt_drop_inode() only drop clean inodes.
I've written an xfstest which detects this bug on ext4, f2fs, and ubifs.
Fixes: b1c0ec3599f4 ("fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY ioctl")
Cc: <stable@vger.kernel.org> # v5.4+
Link: https://lore.kernel.org/r/20200305084138.653498-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Pull rdma fixes from Jason Gunthorpe:
"Nothing particularly exciting, some small ODP regressions from the mmu
notifier rework, another bunch of syzkaller fixes, and a bug fix for a
botched syzkaller fix in the first rc pull request.
- Fix busted syzkaller fix in 'get_new_pps' - this turned out to
crash on certain HW configurations
- Bug fixes for various missed things in error unwinds
- Add a missing rcu_read_lock annotation in hfi/qib
- Fix two ODP related regressions from the recent mmu notifier
changes
- Several more syzkaller bugs in siw, RDMA netlink, verbs and iwcm
- Revert an old patch in CMA as it is now shown to not be allocating
port numbers properly"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/iwcm: Fix iwcm work deallocation
RDMA/siw: Fix failure handling during device creation
RDMA/nldev: Fix crash when set a QP to a new counter but QPN is missing
RDMA/odp: Ensure the mm is still alive before creating an implicit child
RDMA/core: Fix protection fault in ib_mr_pool_destroy
IB/mlx5: Fix implicit ODP race
IB/hfi1, qib: Ensure RCU is locked when accessing list
RDMA/core: Fix pkey and port assignment in get_new_pps
RMDA/cm: Fix missing ib_cm_destroy_id() in ib_cm_insert_listen()
RDMA/rw: Fix error flow during RDMA context initialization
RDMA/core: Fix use of logical OR in get_new_pps
Revert "RDMA/cma: Simplify rdma_resolve_addr() error flow"
|
|
Add the HW bit definition indecating goto chain offload support.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Expose port rate as part of the port speed register fields.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Expose the TLS encryption key general object type enum correctly,
and add the IPSec encryption key general object type enum.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Add HCA_CAP.egress_acl_forward_to_vport field to check whether HW
supports e-switch vport's egress acl to forward packets to other
e-switch vport or not.
By default E-Switch egress ACL forwards eswitch vports egress packets
to their corresponding NIC/VF vports.
With this cap enabled, the driver is allowed to alter this behavior
and forward packets to arbitrary NIC/VF vports with the following
limitations:
a. Multiple processing paths are supported if all of the following
conditions are met:
- HCA_CAP.egress_acl_forward_to_vport is set ==1.
- A destination of type Flow Table only appears once, as the
last destination in the list.
- Vport destination is supported if
HCA_CAP.egress_acl_forward_to_vport==1. Vport must not be
the Uplink.
b. Flow_tag not supported.
c. This table is only applicable after an FDB table is created.
d. Push VLAN action is not supported.
e. Pop VLAN action cannot be added concurrently to this table and
FDB table.
This feature will be used during port failover in bonding scenario
where two VFs representors are bonded to handle failover egress traffic
(VM's ingress/receive traffic).
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
