| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Instead of calling xchg() and unrcu_pointer() before
nfsd_file_put_local(), we now pass pointer to the __rcu pointer and call
xchg() and unrcu_pointer() inside that function.
Where unrcu_pointer() is currently called the internals of "struct
nfsd_file" are not known and that causes older compilers such as gcc-8
to complain.
In some cases we have a __kernel (aka normal) pointer not an __rcu
pointer so we need to cast it to __rcu first. This is strictly a
weakening so no information is lost. Somewhat surprisingly, this cast
is accepted by gcc-8.
This has the pleasing result that the cmpxchg() which sets ro_file and
rw_file, and also the xchg() which clears them, are both now in the nfsd
code.
Reported-by: Pali Rohár <pali@kernel.org>
Reported-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Fixes: 86e00412254a ("nfs: cache all open LOCALIO nfsd_file(s) in client")
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
nfs_uuid_put() and nfs_close_local_fh() can race if a "struct
nfs_file_localio" is released at the same time that nfsd calls
nfs_localio_invalidate_clients().
It is important that neither of these functions completes after the
other has started looking at a given nfs_file_localio and before it
finishes.
If nfs_uuid_put() exits while nfs_close_local_fh() is closing ro_file
and rw_file it could return to __nfd_file_cache_purge() while some files
are still referenced so the purge may not succeed.
If nfs_close_local_fh() exits while nfsd_uuid_put() is still closing the
files then the "struct nfs_file_localio" could be freed while
nfsd_uuid_put() is still looking at it. This side is currently handled
by copying the pointers out of ro_file and rw_file before deleting from
the list in nfsd_uuid. We need to preserve this while ensuring that
nfsd_uuid_put() does wait for nfs_close_local_fh().
This patch use nfl->uuid and nfl->list to provide the required
interlock.
nfs_uuid_put() removes the nfs_file_localio from the list, then drops
locks and puts the two files, then reclaims the spinlock and sets
->nfs_uuid to NULL.
nfs_close_local_fh() operates in the reverse order, setting ->nfs_uuid
to NULL, then closing the files, then unlinking from the list.
If nfs_uuid_put() finds that ->nfs_uuid is already NULL, it waits for
the nfs_file_localio to be removed from the list. If
nfs_close_local_fh() find that it has already been unlinked it waits for
->nfs_uuid to become NULL. This ensure that one of the two tries to
close the files, but they each waits for the other.
As nfs_uuid_put() is making the list empty, change from a
list_for_each_safe loop to a while that always takes the first entry.
This makes the intent more clear.
Also don't move the list to a temporary local list as this would defeat
the guarantees required for the interlock.
Fixes: 86e00412254a ("nfs: cache all open LOCALIO nfsd_file(s) in client")
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
nfs_close_local_fh() is called from two different places for quite
different use case.
It is called from nfs_uuid_put() when the nfs_uuid is being detached -
possibly because the nfs server is not longer serving that filesystem.
In this case there will always be an nfs_uuid and so rcu_read_lock() is
not needed.
It is also called when the nfs_file_localio is no longer needed. In
this case there may not be an active nfs_uuid.
These two can race, and handling the race properly while avoiding
excessive locking will require different handling on each side.
This patch prepares the way by opencoding nfs_close_local_fh() into
nfs_uuid_put(), then simplifying the code there as befits the context.
Fixes: 86e00412254a ("nfs: cache all open LOCALIO nfsd_file(s) in client")
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
The nfsd_localio_operations structure contains nfsd_file_get() to get a
reference to an nfsd_file. This is only used in one place, where
nfsd_open_local_fh() is also used.
This patch combines the two, calling nfsd_open_local_fh() passing a
pointer to where the nfsd_file pointer might be stored. If there is a
pointer there an nfsd_file_get() can get a reference, that reference is
returned. If not a new nfsd_file is acquired, stored at the pointer,
and returned. When we store a reference we also increase the refcount
on the net, as that refcount is decrements when we clear the stored
pointer.
We now get an extra reference *before* storing the new nfsd_file at the
given location. This avoids possible races with the nfsd_file being
freed before the final reference can be taken.
This patch moves the rcu_dereference() needed after fetching from
ro_file or rw_file into the nfsd code where the 'struct nfs_file' is
fully defined. This avoids an error reported by older versions of gcc
such as gcc-8 which complain about rcu_dereference() use in contexts
where the structure (which will supposedly be accessed) is not fully
defined.
Reported-by: Pali Rohár <pali@kernel.org>
Reported-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Fixes: 86e00412254a ("nfs: cache all open LOCALIO nfsd_file(s) in client")
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Having separate nfsd_file_put and nfsd_file_put_local in struct
nfsd_localio_operations doesn't make much sense. The difference is that
nfsd_file_put doesn't drop a reference to the nfs_net which is what
keeps nfsd from shutting down.
Currently, if nfsd tries to shutdown it will invalidate the files stored
in the list from the nfs_uuid and this will drop all references to the
nfsd net that the client holds. But the client could still hold some
references to nfsd_files for active IO. So nfsd might think is has
completely shut down local IO, but hasn't and has no way to wait for
those active IO requests to complete.
So this patch changes nfsd_file_get to nfsd_file_get_local and has it
increase the ref count on the nfsd net and it replaces all calls to
->nfsd_put_file to ->nfsd_put_file_local.
It also changes ->nfsd_open_local_fh to return with the refcount on the
net elevated precisely when a valid nfsd_file is returned.
This means that whenever the client holds a valid nfsd_file, there will
be an associated count on the nfsd net, and so the count can only reach
zero when all nfsd_files have been returned.
nfs_local_file_put() is changed to call nfs_to_nfsd_file_put_local()
instead of replacing calls to one with calls to the other because this
will help a later patch which changes nfs_to_nfsd_file_put_local() to
take an __rcu pointer while nfs_local_file_put() doesn't.
Fixes: 86e00412254a ("nfs: cache all open LOCALIO nfsd_file(s) in client")
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Rather than using nfs_uuid.lock to protect installing
a new ro_file or rw_file, change to use cmpxchg().
Removing the file already uses xchg() so this improves symmetry
and also makes the code a little simpler.
Also remove the optimisation of not taking the lock, and not removing
the nfs_file_localio from the linked list, when both ->ro_file and
->rw_file are already NULL. Given that ->nfs_uuid was not NULL, it is
extremely unlikely that neither ->ro_file or ->rw_file is NULL so
this optimisation can be of little value and it complicates
understanding of the code - why can the list_del_init() be skipped?
Finally, move the assignment of NULL to ->nfs_uuid until after
the last action on the nfs_file_localio (the list_del_init). As soon as
this is NULL a racing nfs_close_local_fh() can bypass all the locking
and go on to free the nfs_file_localio, so we must be certain to be
finished with it first.
Fixes: 86e00412254a ("nfs: cache all open LOCALIO nfsd_file(s) in client")
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
xs_tcp_tls_finish_connecting() already marks the upper xprt
connected, so the same code in xs_tcp_tls_setup_socket() is
never executed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Engineers at Hammerspace noticed that sometimes mounting with
"xprtsec=tls" hangs for a minute or so, and then times out, even
when the NFS server is reachable and responsive.
kTLS shuts off data_ready callbacks if strp->msg_ready is set to
mitigate data_ready callbacks when a full TLS record is not yet
ready to be read from the socket.
Normally msg_ready is clear when the first TLS record arrives on
a socket. However, I observed that sometimes tls_setsockopt() sets
strp->msg_ready, and that prevents forward progress because
tls_data_ready() becomes a no-op.
Moreover, Jakub says: "If there's a full record queued at the time
when [tlshd] passes the socket back to the kernel, it's up to the
reader to read the already queued data out." So SunRPC cannot
expect a data_ready call when ingress data is already waiting.
Add an explicit poll after SunRPC's upper transport is set up to
pick up any data that arrived after the TLS handshake but before
transport set-up is complete.
Reported-by: Steve Sears <sjs@hammerspace.com>
Suggested-by: Jakub Kacinski <kuba@kernel.org>
Fixes: 75eb6af7acdf ("SUNRPC: Add a TCP-with-TLS RPC transport class")
Tested-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
A recent commit introduced nfs4_do_mkdir() which reports an error from
nfs4_call_sync() by returning it with ERR_PTR().
This is a problem as nfs4_call_sync() can return negative NFS-specific
errors with values larger than MAX_ERRNO (4095). One example is
NFS4ERR_DELAY which has value 10008.
This "pointer" gets to PTR_ERR_OR_ZERO() in nfs4_proc_mkdir() which
chooses ZERO because it isn't in the range of value errors. Ultimately
the pointer is dereferenced.
This patch changes nfs4_do_mkdir() to report the dentry pointer and
status separately - pointer as a return value, status in an "int *"
parameter.
The same separation is used for _nfs4_proc_mkdir() and the two are
combined only in nfs4_proc_mkdir() after the status has passed through
nfs4_handle_exception(), which ensures the error code does not exceed
MAX_ERRNO.
It also fixes a problem in the even when nfs4_handle_exception() updated
the error value, the original 'alias' was still returned.
Reported-by: Anna Schumaker <anna@kernel.org>
Fixes: 8376583b84a1 ("nfs: change mkdir inode_operation to return alternate dentry if needed.")
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
In some scenarios, when mounting NFS, more than one superblock may be
created. The final superblock used is the last one created, but only the
first superblock carries the ro flag passed from user space. If a ro flag
is added to the superblock via remount, it will trigger the issue
described in Link[1].
Link[2] attempted to address this by marking the superblock as ro during
the initial mount. However, this introduced a new problem in scenarios
where multiple mount points share the same superblock:
[root@a ~]# mount /dev/sdb /mnt/sdb
[root@a ~]# echo "/mnt/sdb *(rw,no_root_squash)" > /etc/exports
[root@a ~]# echo "/mnt/sdb/test_dir2 *(ro,no_root_squash)" >> /etc/exports
[root@a ~]# systemctl restart nfs-server
[root@a ~]# mount -t nfs -o rw 127.0.0.1:/mnt/sdb/test_dir1 /mnt/test_mp1
[root@a ~]# mount | grep nfs4
127.0.0.1:/mnt/sdb/test_dir1 on /mnt/test_mp1 type nfs4 (rw,relatime,...
[root@a ~]# mount -t nfs -o ro 127.0.0.1:/mnt/sdb/test_dir2 /mnt/test_mp2
[root@a ~]# mount | grep nfs4
127.0.0.1:/mnt/sdb/test_dir1 on /mnt/test_mp1 type nfs4 (ro,relatime,...
127.0.0.1:/mnt/sdb/test_dir2 on /mnt/test_mp2 type nfs4 (ro,relatime,...
[root@a ~]#
When mounting the second NFS, the shared superblock is marked as ro,
causing the previous NFS mount to become read-only.
To resolve both issues, the ro flag is no longer applied to the superblock
during remount. Instead, the ro flag on the mount is used to control
whether the mount point is read-only.
Fixes: 281cad46b34d ("NFS: Create a submount rpc_op")
Link[1]: https://lore.kernel.org/all/20240604112636.236517-3-lilingfeng@huaweicloud.com/
Link[2]: https://lore.kernel.org/all/20241130035818.1459775-1-lilingfeng3@huawei.com/
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
As described in the link, commit 52cb7f8f1778 ("nfs: ignore SB_RDONLY when
mounting nfs") removed the check for the ro flag when determining whether
to share the superblock, which caused issues when mounting different
subdirectories under the same export directory via NFSv3. However, this
change did not affect NFSv4.
For NFSv3:
1) A single superblock is created for the initial mount.
2) When mounted read-only, this superblock carries the SB_RDONLY flag.
3) Before commit 52cb7f8f1778 ("nfs: ignore SB_RDONLY when mounting nfs"):
Subsequent rw mounts would not share the existing ro superblock due to
flag mismatch, creating a new superblock without SB_RDONLY.
After the commit:
The SB_RDONLY flag is ignored during superblock comparison, and this leads
to sharing the existing superblock even for rw mounts.
Ultimately results in write operations being rejected at the VFS layer.
For NFSv4:
1) Multiple superblocks are created and the last one will be kept.
2) The actually used superblock for ro mounts doesn't carry SB_RDONLY flag.
Therefore, commit 52cb7f8f1778 doesn't affect NFSv4 mounts.
Clear SB_RDONLY before getting superblock when NFS_MOUNT_UNSHARED is not
set to fix it.
Fixes: 52cb7f8f1778 ("nfs: ignore SB_RDONLY when mounting nfs")
Closes: https://lore.kernel.org/all/12d7ea53-1202-4e21-a7ef-431c94758ce5@app.fastmail.com/T/
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
It was reported that NFS client mounts of AWS Elastic File System
(EFS) volumes is slow, this is because the AWS firewall disallows
LOCALIO (because it doesn't consider the use of NFS_LOCALIO_PROGRAM
valid), see: https://bugzilla.redhat.com/show_bug.cgi?id=2335129
Switch to performing the LOCALIO probe asynchronously to address the
potential for the NFS LOCALIO protocol being disallowed and/or slowed
by the remote server's response.
While at it, fix nfs_local_probe_async() to always take/put a
reference on the nfs_client that is using the LOCALIO protocol.
Also, unexport the nfs_local_probe() symbol and make it private to
fs/nfs/localio.c
This change has the side-effect of initially issuing reads, writes and
commits over the wire via SUNRPC until the LOCALIO probe completes.
Suggested-by: Jeff Layton <jlayton@kernel.org> # to always probe async
Fixes: 76d4cb6345da ("nfs: probe for LOCALIO when v4 client reconnects to server")
Cc: stable@vger.kernel.org # 6.14+
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Implementation follows bones of the pattern that was established in
commit a35518cae4b325 ("NFSv4.1/pnfs: fix NFS with TLS in pnfs").
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
The Linux NFS client and server added support for LOCALIO in Linux
v6.12. It is useful to know if a client and server negotiated LOCALIO
be used, so expose it through the 'localio' attribute.
Suggested-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Stop using write_cache_pages and use writeback_iter directly. This
removes an indirect call per written folio and makes the code easier
to follow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Use early returns wherever possible to simplify the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
nfs_do_writepage is a successful return that requires the caller to
unlock the folio. Using it here requires special casing both in
nfs_do_writepage and nfs_writepages_callback and leaves a land mine in
nfs_wb_folio in case it ever set the flag. Remove it and just
unconditionally unlock in nfs_writepages_callback.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Fold nfs_page_async_flush into its only caller to clean up the code a
bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
fattr4_numlinks is a recommended attribute, so the client should emulate
it even if the server doesn't support it. In decode_attr_nlink function
in nfs4xdr.c, nlink is initialized to 1. However, this default value
isn't set to the inode due to the check in nfs_fhget.
So if the server doesn't support numlinks, inode's nlink will be zero,
the mount will fail with error "Stale file handle". Set the nlink to 1
if the server doesn't support it.
Signed-off-by: Han Young <hanyang.tony@bytedance.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
The NFS client's list of delegations can grow quite large (well beyond the
delegation watermark) if the server is revoking or there are repeated
events that expire state. Once this happens, the revoked delegations can
cause a performance problem for subsequent walks of the
servers->delegations list when the client tries to test and free state.
If we can determine that the FREE_STATEID operation has completed without
error, we can prune the delegation from the list.
Since the NFS client combines TEST_STATEID with FREE_STATEID in its minor
version operations, there isn't an easy way to communicate success of
FREE_STATEID. Rather than re-arrange quite a number of calling paths to
break out the separate procedures, let's signal the success of FREE_STATEID
by setting the stateid's type.
Set NFS4_FREED_STATEID_TYPE for stateids that have been successfully
discarded from the server, and use that type to signal that the delegation
can be cleaned up.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
fattr4_open_arguments is a v4.2 recommended attribute, so we shouldn't
be sending it to v4.1 servers.
Fixes: cb78f9b7d0c0 ("nfs: fix the fetch of FATTR4_OPEN_ARGUMENTS")
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Cc: stable@vger.kernel.org # 6.11+
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Currently, when NFS is queried for all the labels present on the
file via a command example "getfattr -d -m . /mnt/testfile", it
does not return the security label. Yet when asked specifically for
the label (getfattr -n security.selinux) it will be returned.
Include the security label when all attributes are queried.
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
delegated
nfs_setattr will flush all pending writes before updating a file time
attributes. However when the client holds delegated timestamps, it can
update its timestamps locally as it is the authority for the file
times attributes. The client will later set the file attributes by
adding a setattr to the delegreturn compound updating the server time
attributes.
Fix nfs_setattr to avoid flushing pending writes when the file time
attributes are delegated and the mtime/atime are set to a fixed
timestamp (ATTR_[MODIFY|ACCESS]_SET. Also, when sending the setattr
procedure over the wire, we need to clear the correct attribute bits
from the bitmask.
I was able to measure a noticable speedup when measuring untar performance.
Test: $ time tar xzf ~/dir.tgz
Baseline: 1m13.072s
Patched: 0m49.038s
Which is more than 30% latency improvement.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
This implements a suggestion from Trond that we can mimic
FALLOC_FL_ZERO_RANGE by sending a compound that first does a DEALLOCATE
to punch a hole in a file, and then an ALLOCATE to fill the hole with
zeroes. There might technically be a race here, but once the DEALLOCATE
finishes any reads from the region would return zeroes anyway, so I
don't expect it to cause problems.
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Sometimes, when a file was read while it was being truncated by
another NFS client, the kernel could deadlock because folio_unlock()
was called twice, and the second call would XOR back the `PG_locked`
flag.
Most of the time (depending on the timing of the truncation), nobody
notices the problem because folio_unlock() gets called three times,
which flips `PG_locked` back off:
1. vfs_read, nfs_read_folio, ... nfs_read_add_folio,
nfs_return_empty_folio
2. vfs_read, nfs_read_folio, ... netfs_read_collection,
netfs_unlock_abandoned_read_pages
3. vfs_read, ... nfs_do_read_folio, nfs_read_add_folio,
nfs_return_empty_folio
The problem is that nfs_read_add_folio() is not supposed to unlock the
folio if fscache is enabled, and a nfs_netfs_folio_unlock() check is
missing in nfs_return_empty_folio().
Rarely this leads to a warning in netfs_read_collection():
------------[ cut here ]------------
R=0000031c: folio 10 is not locked
WARNING: CPU: 0 PID: 29 at fs/netfs/read_collect.c:133 netfs_read_collection+0x7c0/0xf00
[...]
Workqueue: events_unbound netfs_read_collection_worker
RIP: 0010:netfs_read_collection+0x7c0/0xf00
[...]
Call Trace:
<TASK>
netfs_read_collection_worker+0x67/0x80
process_one_work+0x12e/0x2c0
worker_thread+0x295/0x3a0
Most of the time, however, processes just get stuck forever in
folio_wait_bit_common(), waiting for `PG_locked` to disappear, which
never happens because nobody is really holding the folio lock.
Fixes: 000dbe0bec05 ("NFS: Convert buffered read paths to use netfs when fscache is enabled")
Cc: stable@vger.kernel.org
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
The nfs inodes for referral anchors that have not yet been followed have
their filehandles zeroed out.
Attempting to call getxattr() on one of these will cause the nfs client
to send a GETATTR to the nfs server with the preceding PUTFH sans
filehandle. The server will reply NFS4ERR_NOFILEHANDLE, leading to -EIO
being returned to the application.
For example:
$ strace -e trace=getxattr getfattr -n system.nfs4_acl /mnt/t/ref
getxattr("/mnt/t/ref", "system.nfs4_acl", NULL, 0) = -1 EIO (Input/output error)
/mnt/t/ref: system.nfs4_acl: Input/output error
+++ exited with 1 +++
Have the xattr handlers return -ENODATA instead.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
These are long-held references to the netns, so make sure the refcount
tracker is aware of them.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
RFC2203 requires that retransmitted messages use a new gss sequence
number, but the same XID. This means that if the server is just slow
(e.x. overloaded), the client might receive a response using an older
seqno than the one it has recorded.
Currently, Linux's client immediately retransmits in this case. However,
this leads to a lot of wasted retransmits until the server eventually
responds faster than the client can resend.
Client -> SEQ 1 -> Server
Client -> SEQ 2 -> Server
Client <- SEQ 1 <- Server (misses, expecting seqno = 2)
Client -> SEQ 3 -> Server (immediate retransmission on miss)
Client <- SEQ 2 <- Server (misses, expecting seqno = 3)
Client -> SEQ 4 -> Server (immediate retransmission on miss)
... and so on ...
This commit makes it so that we ignore messages with bad checksums
due to seqnum mismatch, and rely on the usual timeout behavior for
retransmission instead of doing so immediately.
Signed-off-by: Nikhil Jha <njha@janestreet.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
This implements a sequence number cache of the last three (right now
hardcoded) sent sequence numbers for a given XID, as suggested by the
RFC.
From RFC2203 5.3.3.1:
"Note that the sequence number algorithm requires that the client
increment the sequence number even if it is retrying a request with
the same RPC transaction identifier. It is not infrequent for
clients to get into a situation where they send two or more attempts
and a slow server sends the reply for the first attempt. With
RPCSEC_GSS, each request and reply will have a unique sequence
number. If the client wishes to improve turn around time on the RPC
call, it can cache the RPCSEC_GSS sequence number of each request it
sends. Then when it receives a response with a matching RPC
transaction identifier, it can compute the checksum of each sequence
number in the cache to try to match the checksum in the reply's
verifier."
Signed-off-by: Nikhil Jha <njha@janestreet.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"This has a bunch of idxd driver fixes, dmatest revert and bunch of
smaller driver fixes:
- a bunch of idxd potential mem leak fixes
- dmatest revert for waiting for interrupt fix as that causes issue
- a couple of ti k3 udma fixes for locking and cap_mask
- mediatek deadlock fix and unused variable cleanup fix"
* tag 'dmaengine-fix-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: mediatek: drop unused variable
dmaengine: fsl-edma: Fix return code for unhandled interrupts
dmaengine: mediatek: Fix a possible deadlock error in mtk_cqdma_tx_status()
dmaengine: idxd: Fix ->poll() return value
dmaengine: idxd: Refactor remove call with idxd_cleanup() helper
dmaengine: idxd: Add missing idxd cleanup to fix memory leak in remove call
dmaengine: idxd: fix memory leak in error handling path of idxd_pci_probe
dmaengine: idxd: fix memory leak in error handling path of idxd_alloc
dmaengine: idxd: Add missing cleanups in cleanup internals
dmaengine: idxd: Add missing cleanup for early error out in idxd_setup_internals
dmaengine: idxd: fix memory leak in error handling path of idxd_setup_groups
dmaengine: idxd: fix memory leak in error handling path of idxd_setup_engines
dmaengine: idxd: fix memory leak in error handling path of idxd_setup_wqs
dmaengine: ptdma: Move variable condition check to the first place and remove redundancy
dmaengine: idxd: Fix allowing write() from different address spaces
dmaengine: ti: k3-udma: Add missing locking
dmaengine: ti: k3-udma: Use cap_mask directly from dma_device structure instead of a local copy
dmaengine: Revert "dmaengine: dmatest: Fix dmatest waiting less when interrupted"
dmaengine: idxd: cdev: Fix uninitialized use of sva in idxd_cdev_open
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
"A bunch of renesas fixes and few smaller fixes in other drivers:
- Rensas fixes for unbind ole detection, irq, locking etc
- tegra fixes for error handling at init and UTMI power states and
stray unlock fix
- rockchip missing assignment and pll output fixes
- startfive usb host detection fixes"
* tag 'phy-fixes-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: Fix error handling in tegra_xusb_port_init
phy: renesas: rcar-gen3-usb2: Set timing registers only once
phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off
phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver data
phy: renesas: rcar-gen3-usb2: Move IRQ request in probe
phy: renesas: rcar-gen3-usb2: Fix role detection on unbind/bind
phy: tegra: xusb: remove a stray unlock
phy: phy-rockchip-samsung-hdptx: Fix PHY PLL output 50.25MHz error
phy: starfive: jh7110-usb: Fix USB 2.0 host occasional detection failure
phy: rockchip-samsung-dcphy: Add missing assignment
phy: can-transceiver: Re-instate "mux-states" property presence check
phy: qcom-qmp-ufs: check for mode type for phy setting
phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- Fix for irq domain creation race in the core
* tag 'soundwire-6.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: bus: Fix race on the creation of the IRQ domain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Nine singleton hotfixes, all MM. Four are cc:stable"
* tag 'mm-hotfixes-stable-2025-05-17-09-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: userfaultfd: correct dirty flags set for both present and swap pte
zsmalloc: don't underflow size calculation in zs_obj_write()
mm/page_alloc: fix race condition in unaccepted memory handling
mm/page_alloc: ensure try_alloc_pages() plays well with unaccepted memory
MAINTAINERS: add mm GUP section
mm/codetag: move tag retrieval back upfront in __free_pages()
mm/memory: fix mapcount / refcount sanity check for mTHP reuse
kernel/fork: only call untrack_pfn_clear() on VMAs duplicated for fork()
mm: hugetlb: fix incorrect fallback for subpool
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc irqchip driver fixes from Ingo Molnar:
- Remove the MSI_CHIP_FLAG_SET_ACK flag from 5 irqchip drivers
that did not require it
- Fix IRQ handling delays in the riscv-imsic irqchip driver
* tag 'irq-urgent-2025-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-imsic: Start local sync timer on correct CPU
irqchip: Drop MSI_CHIP_FLAG_SET_ACK from unsuspecting MSI drivers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix SEV-SNP kdump bugs
- Update the email address of Alexey Makhalov in MAINTAINERS
- Add the CPU feature flag for the Zen6 microarchitecture
- Fix typo in system message
* tag 'x86-urgent-2025-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove duplicated word in warning message
x86/CPU/AMD: Add X86_FEATURE_ZEN6
x86/sev: Make sure pages are not skipped during kdump
x86/sev: Do not touch VMSA pages during SNP guest memory kdump
MAINTAINERS: Update Alexey Makhalov's email address
x86/sev: Fix operator precedence in GHCB_MSR_VMPL_REQ_LEVEL macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf event fix from Ingo Molnar:
"Fix PEBS-via-PT crash"
* tag 'perf-urgent-2025-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix segfault with PEBS-via-PT with sample_freq
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix some bugs in kernel-fpu, cpu idle function, hibernation and
uprobes"
* tag 'loongarch-fixes-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: uprobes: Remove redundant code about resume_era
LoongArch: uprobes: Remove user_{en,dis}able_single_step()
LoongArch: Save and restore CSR.CNTC for hibernation
LoongArch: Move __arch_cpu_idle() to .cpuidle.text section
LoongArch: Fix MAX_REG_OFFSET calculation
LoongArch: Prevent cond_resched() occurring within kernel-fpu
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
- designware: cleanup properly on probe failure
* tag 'i2c-for-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: designware: Fix an error handling path in i2c_dw_pci_probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.15-rc7
- designware: cleanup properly on probe failure
|
|
Pull smb client fixes from Steve French:
- Fix memory leak in mkdir error path
- Fix max rsize miscalculation after channel reconnect
* tag '6.15-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix zero rsize error messages
smb: client: fix memory leak during error handling for POSIX mkdir
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, I'll be honest and say I think this is larger than
I'd prefer at this point, the main blow out point is that xe has two
larger fixes.
One is a fix for active context utilisation reporting, it's for a
reported regression and will end up in stable anyways, so I don't see
any point in holding it up.
The second is a fix for mixed cpu/gpu atomics, which are currently
broken, but are also not something your average desktop/laptop user is
going to hit in normal operation, and having them fixed now is better
than threading them through stable later.
Other than those, it's mostly the usual, a bunch of amdgpu randoms and
a few other minor fixes.
dma-buf:
- Avoid memory reordering in fence handling
meson:
- Avoid integer overflow in mode-clock calculations
panel-mipi-dbi:
- Fix output with drm_client_setup_with_fourcc()
amdgpu:
- Fix CSA unmap
- Fix MALL size reporting on GFX11.5
- AUX fix
- DCN 3.5 fix
- VRR fix
- DP MST fix
- DML 2.1 fixes
- Silence DP AUX spam
- DCN 4.0.1 cursor fix
- VCN 4.0.5 fix
ivpu:
- Fix buffer size in debugfs code
gpuvm:
- Add timeslicing and allocation restriction for SVM
xe:
- Fix shrinker debugfs name
- Add HW workaround to Xe2
- Fix SVM when mixing GPU and CPU atomics
- Fix per client engine utilization due to active contexts not saving
timestamp with lite restore enabled"
* tag 'drm-fixes-2025-05-17' of https://gitlab.freedesktop.org/drm/kernel: (24 commits)
drm/xe: Add WA BB to capture active context utilization
drm/xe: Save the gt pointer in lrc and drop the tile
drm/xe: Save CTX_TIMESTAMP mmio value instead of LRC value
drm/xe: Timeslice GPU on atomic SVM fault
drm/gpusvm: Add timeslicing support to GPU SVM
drm/xe: Strict migration policy for atomic SVM faults
drm/gpusvm: Introduce devmem_only flag for allocation
drm/xe/xe2hpg: Add Wa_22021007897
drm/amdgpu: read back register after written for VCN v4.0.5
Revert "drm/amd/display: Hardware cursor changes color when switched to software cursor"
dma-buf: insert memory barrier before updating num_fences
drm/xe: Fix the gem shrinker name
drm/amd/display: Avoid flooding unnecessary info messages
drm/amd/display: Fix null check of pipe_ctx->plane_state for update_dchubp_dpp
drm/amd/display: check stream id dml21 wrapper to get plane_id
drm/amd/display: fix link_set_dpms_off multi-display MST corner case
drm/amd/display: Defer BW-optimization-blocked DRR adjustments
Revert: "drm/amd/display: Enable urgent latency adjustment on DCN35"
drm/amd/display: Correct the reply value when AUX write incomplete
drm/amdgpu: fix incorrect MALL size for GFX1151
...
|
|
Pull NFS client bugfixes from Trond Myklebust:
- NFS: Fix a couple of missed handlers for the ENETDOWN and ENETUNREACH
transport errors
- NFS: Handle Oopsable failure of nfs_get_lock_context in the unlock
path
- NFSv4: Fix a race in nfs_local_open_fh()
- NFSv4/pNFS: Fix a couple of layout segment leaks in layoutreturn
- NFSv4/pNFS Avoid sharing pNFS DS connections between net namespaces
since IP addresses are not guaranteed to refer to the same nodes
- NFS: Don't flush file data while holding multiple directory locks in
nfs_rename()
* tag 'nfs-for-6.15-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Avoid flushing data while holding directory locks in nfs_rename()
NFS/pnfs: Fix the error path in pnfs_layoutreturn_retry_later_locked()
NFSv4/pnfs: Reset the layout state after a layoutreturn
NFS/localio: Fix a race in nfs_local_open_fh()
nfs: nfs3acl: drop useless assignment in nfs3_get_acl()
nfs: direct: drop useless initializer in nfs_direct_write_completion()
nfs: move the nfs4_data_server_cache into struct nfs_net
nfs: don't share pNFS DS connections between net namespaces
nfs: handle failure of nfs_get_lock_context in unlock path
pNFS/flexfiles: Record the RPC errors in the I/O tracepoints
NFSv4/pnfs: Layoutreturn on close must handle fatal networking errors
NFSv4: Handle fatal ENETDOWN and ENETUNREACH errors
|
|
The Linux client assumes that all filehandles are non-volatile for
renames within the same directory (otherwise sillyrename cannot work).
However, the existence of the Linux 'subtree_check' export option has
meant that nfs_rename() has always assumed it needs to flush writes
before attempting to rename.
Since NFSv4 does allow the client to query whether or not the server
exhibits this behaviour, and since knfsd does actually set the
appropriate flag when 'subtree_check' is enabled on an export, it
should be OK to optimise away the write flushing behaviour in the cases
where it is clearly not needed.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
|
|
If there isn't a valid layout, or the layout stateid has changed, the
cleanup after a layout return should clear out the old data.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
If there are still layout segments in the layout plh_return_lsegs list
after a layout return, we should be resetting the state to ensure they
eventually get returned as well.
Fixes: 68f744797edd ("pNFS: Do not free layout segments that are marked for return")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"Fix to zone block devices to make the maximum segment count match what
the block layer is capable of"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd_zbc: block: Respect bio vector limits for REPORT ZONES buffer
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- fixes for atomic writes (Alan Adamson)
- fixes for polled CQs in nvmet-epf (Damien Le Moal)
- fix for polled CQs in nvme-pci (Keith Busch)
- fix compile on odd configs that need to be forced to inline
(Kees Cook)
- one more quirk (Ilya Guterman)
- Fix for missing allocation of an integrity buffer for some cases
- Fix for a regression with ublk command cancelation
* tag 'block-6.15-20250515' of git://git.kernel.dk/linux:
ublk: fix dead loop when canceling io command
nvme-pci: add NVME_QUIRK_NO_DEEPEST_PS quirk for SOLIDIGM P44 Pro
nvme: all namespaces in a subsystem must adhere to a common atomic write size
nvme: multipath: enable BLK_FEAT_ATOMIC_WRITES for multipathing
nvmet: pci-epf: remove NVMET_PCI_EPF_Q_IS_SQ
nvmet: pci-epf: improve debug message
nvmet: pci-epf: cleanup nvmet_pci_epf_raise_irq()
nvmet: pci-epf: do not fall back to using INTX if not supported
nvmet: pci-epf: clear completion queue IRQ flag on delete
nvme-pci: acquire cq_poll_lock in nvme_poll_irqdisable
nvme-pci: make nvme_pci_npages_prp() __always_inline
block: always allocate integrity buffer when required
|
|
Pull io_uring fixes from Jens Axboe:
- Fix a regression with highmem and mapping of regions, where
the coalescing code assumes any page is directly mapped
- Fix an issue with HYBRID_IOPOLL and passthrough commands,
where the timer wasn't always setup correctly
- Fix an issue with fdinfo not correctly locking around reading
the rings, which can be an issue if the ring is being resized
at the same time
* tag 'io_uring-6.15-20250515' of git://git.kernel.dk/linux:
io_uring/fdinfo: grab ctx->uring_lock around io_uring_show_fdinfo()
io_uring/memmap: don't use page_address() on a highmem page
io_uring/uring_cmd: fix hybrid polling initialization issue
|
|
Pull xfs fixes from Carlos Maiolino:
"This includes a bug fix for a possible data corruption vector on the
zoned allocator garbage collector"
* tag 'xfs-fixes-6.15-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Fix comment on xfs_trans_ail_update_bulk()
xfs: Fix a comment on xfs_ail_delete
xfs: Fail remount with noattr2 on a v5 with v4 enabled
xfs: fix zoned GC data corruption due to wrong bv_offset
xfs: free up mp->m_free[0].count in error case
|
