summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-01-22iwlwifi: mvm: generate statistics debugfs codeJohannes Berg2-86/+78
There's no need to duplicate the structure field name in the string, just generate the string in the macro that's there anyway. To keep the debugfs output the same, rename one (otherwise unused) field. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: move statistics API to new header fileJohannes Berg2-208/+278
Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: sync statistics firmware APIJohannes Berg2-37/+37
The firmware API structs are split differently, synchronize the struct splits with the current firmware definitions. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: correctly set the NMI registerEmmanuel Grumbach2-4/+9
When we want to trigger an NMI in the device, we need to set bit 7 and not bit 0. However, older firmwares don't register to the interrupt issued by bit 7. Use bit 7 first so that the correct interrupt will be issued hoping that the firmware will react. To be on the safe side, set bit 0 in case the firmware didn't register to the proper interrupt. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: add rxf and txf to dump dataLiad Kaufman7-27/+304
When the FW is in error status - try to read the RXF and TXF (all of them) and add them to the dump data. This shouldn't happen in non-error statuses, as we don't want to stop the RXF/TXF while they are running. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: add support for dumping a secondary SRAMIdo Yariv3-4/+32
Some HW modules have two SRAMs. In such cases add the secondary SRAM to the list of dumped segments. Signed-off-by: Ido Yariv <idox.yariv@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: add debugfs file for misbehaving U-APSD APJohannes Berg1-0/+31
As this functionality relies on getting a firmware notification it is difficult to test. Allow accessing the data for it from debugfs to be able to trigger all kinds of scenarios to test. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: let the firmware configure the schedulerEmmanuel Grumbach9-107/+97
A new host command can be used to configure the scheduler instead of accessing the scheduler's registers from the driver. This is easier and less error prone since accessing the hardware at certain moments can lead to races with the firmware. Prefer to use the host command whenever it is available. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: scan dwell time correctionsDavid Spinadel2-5/+16
Use only basic dwell time (10 ms for active scan and 110 for passive), regardless of the number of the probes and the band, if it is supported by the FW. The FW will add 3 ms for each probe sent and 10 ms for low band channels. Add a TLV flag to indicate such support in FW. This fix is needed to fix few bugs regarding scans that take too much time. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: remove unused TLV capability flagsEmmanuel Grumbach1-6/+0
The driver doesn't support the firmwares that don't have these capabilities. The code that actually used these flags has been removed already, but the flags were left for an unclear reason. Remove them. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: add print of he nvm versionEran Harary1-0/+2
Print the nvm version in the log for debugging purposes. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: set max_out_time equal to frag_passive_dwell in fragmented scanHaim Dreyfuss1-2/+2
Fragmented scan should be applied for all channels, passive and active. When scanning on passive channels the firmware uses frag_passive_dwell to define the maximum continuous scan time before returning to the operating channel. On active channels max_out_time is the parameter used by the firmware to define the maximum time allowed out of the operating channel. Since active channels' scan should also be fragmented set max_out_time equal to frag_passive_dwell. In addition: - Set max_out_time and suspend_time if the firmware doesn't support fragmented scan to avoid unexpected behavior. - Adjust max_out_time for second level of scan precedence. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Reviewed-by: Alexander Bondar <alexander.bondar@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: rs: allow to disable MIMO for P2P onlyEmmanuel Grumbach2-2/+2
This is to work around interoperability bugs with devices that don't hanle MIMO properly. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: allow to collect debug data from non-sleepable contextEmmanuel Grumbach2-7/+7
iwl_mvm_fw_dbg_collect allows to collect debug data from the firmware. Most of the firmware interaction is done in non-sleepable context. It makes little sense to force the caller of iwl_mvm_fw_dbg_collect to sleep. Defer the actual collection to a worker so that this function will be able to be called from any context. Reviewed-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: make sure state isn't in d0i3 when stopping fw monitorLiad Kaufman1-2/+7
In case platform is in d0i3 - make sure it is awake when writing the registers to stop the monitor when collecting FW debug data. Plus, remove unneeded mutex locking currently done. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: Add debugfs entry to enable scan offload notificationAlexander Bondar4-0/+48
This option enables scan offload iteration complete notification from firmware which includes the last iteration's status and the scanned channels from the current iteration. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: add new config and PCI IDs for 4165 seriesOren Givon3-0/+13
Add a new config for 4165 series over PCI and insert support for two new 4165 series PCI IDs. Signed-off-by: Oren Givon <oren.givon@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: make sure state isn't in d0i3 when collecting fw dbgLiad Kaufman3-0/+7
This makes sure that we're not trying to read/write any of the FW debug data collected during d0i3. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: rs: repeat initial legacy rates in LQ tableEyal Shapira2-11/+13
Repeating the legacy rates avoids degrading quickly to lower rates due to collisions which is common when doing TCP Tx traffic in legacy. This slightly improves TCP Tx throughput while working in legacy in different scenarios. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: don't indicate no BA if STA was in powersaveEyal Shapira1-1/+2
If Tx failed because the STA was in powersave there's no point in sending a BAR so avoid indicating AMPDU_NO_BACK to mac80211. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22Merge commit 'c1e140bf79d817d4a7aa9932eb98b0359c87af33' from mac80211-nextKalle Valo73-831/+1750
Patch "ath9k: Fix no-ack frame status" needs these mac80211 patches: commit 5cf16616e152dd5c274a65954c77f64892d025a8 Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> Date: Wed Dec 10 21:26:11 2014 +0530 mac80211: Fix accounting of multicast frames commit 6b127c71fbdd3daacfd8b9f80b8e6ebfb70a889e Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> Date: Wed Dec 10 21:26:10 2014 +0530 mac80211: Move IEEE80211_TX_CTL_PS_RESPONSE Conflicts: drivers/net/wireless/ath/wil6210/cfg80211.c drivers/staging/rtl8723au/os_dep/ioctl_cfg80211.c
2015-01-22MAINTAINERS: remove ath5k mailing listJiri Slaby1-1/+0
The list is in the process of closing. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: linux-wireless@vger.kernel.org Cc: "Michael Renzmann" <mrenzmann@madwifi-project.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-20iwlwifi: mvm: validate tid and sta_id in ba_notifEyal Shapira1-0/+5
These are coming from the FW and are used to access arrays. Bad values can cause an out of bounds access so discard such ba_notifs and warn. CC: <stable@vger.kernel.org> [3.10+] Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-19mac80211: delete the assoc/auth timer upon suspendEmmanuel Grumbach1-0/+12
While suspending, we destroy the authentication / association that might be taking place. While doing so, we forgot to delete the timer which can be firing after local->suspended is already set, producing the warning below. Fix that by deleting the timer. [66722.825487] WARNING: CPU: 2 PID: 5612 at net/mac80211/util.c:755 ieee80211_can_queue_work.isra.18+0x32/0x40 [mac80211]() [66722.825487] queueing ieee80211 work while going to suspend [66722.825529] CPU: 2 PID: 5612 Comm: kworker/u16:69 Tainted: G W O 3.16.1+ #24 [66722.825537] Workqueue: events_unbound async_run_entry_fn [66722.825545] Call Trace: [66722.825552] <IRQ> [<ffffffff817edbb2>] dump_stack+0x4d/0x66 [66722.825556] [<ffffffff81075cad>] warn_slowpath_common+0x7d/0xa0 [66722.825572] [<ffffffffa06b5b90>] ? ieee80211_sta_bcn_mon_timer+0x50/0x50 [mac80211] [66722.825573] [<ffffffff81075d1c>] warn_slowpath_fmt+0x4c/0x50 [66722.825586] [<ffffffffa06977a2>] ieee80211_can_queue_work.isra.18+0x32/0x40 [mac80211] [66722.825598] [<ffffffffa06977d5>] ieee80211_queue_work+0x25/0x50 [mac80211] [66722.825611] [<ffffffffa06b5bac>] ieee80211_sta_timer+0x1c/0x20 [mac80211] [66722.825614] [<ffffffff8108655a>] call_timer_fn+0x8a/0x300 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-19Revert "wireless: Support of IFLA_INFO_KIND rtnl attribute"Johannes Berg1-6/+0
This reverts commit ba1debdfed974f25aa598c283567878657b292ee. Oliver reported that it breaks network-manager, for some reason with this patch NM decides that the device isn't wireless but "generic" (ethernet), sees no carrier (as expected with wifi) and fails to do anything else with it. Revert this to unbreak userspace. Reported-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-18iwlwifi: mvm: abort scheduled scan upon RFKILLEmmanuel Grumbach1-0/+7
When we have an active scheduled scan, and the RFKILL interrupt kicks in, the stack will cancel the scheduled scan as part of the down flow. But cancelling scheduled scan usually implies sending a command to the firwmare which has been killed as part of the RFKILL interrupt handling. Because of that, we returned an error to mac80211 when it asked to stop the scheduled scan and didn't notify the end of the scheduled scan. Besides a fat warning, this led to a situation in which cfg80211 would refuse any new scan request. To disentangle this, fake that the scheduled scan has been stopped without sending the command to the firwmare, return 0 after having properly let cfg80211 know that the scan has been cancelled. This is basically the same as: commit 9b520d84957d63348e87c0f2cbd21d86e1e8f2f2 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Tue Nov 4 15:54:11 2014 +0200 iwlwifi: mvm: abort scan upon RFKILL This code existed but not for all the different FW APIs we support. Fix this. but for the scheduled scan case. Link: http://permalink.gmane.org/gmane.linux.kernel.wireless.general/133232 Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-16cfg80211: fix checking nl80211_send_station() return valueJohannes Berg1-1/+1
The return value from nl80211_send_station() is the length of the skb, or a negative error, so abort sending the message only when the return value was negative. This fixes the ibss_rsn wpa_supplicant test case. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-16mac80211: remove doubled semicolonJohannes Berg1-1/+1
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-16cfg80211: change bandwidth reporting to explicit fieldJohannes Berg8-50/+125
For some reason, we made the bandwidth separate flags, which is rather confusing - a single rate cannot have different bandwidths at the same time. Change this to no longer be flags but use a separate field for the bandwidth ('bw') instead. While at it, add support for 5 and 10 MHz rates - these are reported as regular legacy rates with their real bitrate, but tagged as 5/10 now to make it easier to distinguish them. In the nl80211 API, the flags are preserved, but the code now can also clearly only set a single one of the flags. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-15cfg80211: remove 80+80 MHz rate reportingJohannes Berg4-11/+6
These rates are treated the same as 160 MHz in the spec, so it makes no sense to distinguish them. As no driver uses them yet, this is also not a problem, just remove them. In the userspace API the field remains reserved to preserve API and ABI. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-15mac80211: remove 80+80 MHz rate reportingJohannes Berg4-13/+2
These rates are treated the same as 160 MHz in the spec, so it makes no sense to distinguish them. As no driver uses them yet, this is also not a problem, just remove them. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-15b43legacy: Remove unused b43legacy_radio_set_tx_iq()Rickard Strandqvist2-20/+0
Remove the function b43legacy_radio_set_tx_iq() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Rafa? Mi?ecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15orinoco/hermes: select CFG80211_WEXTJohannes Berg1-1/+2
It makes no sense to require the user to find and enable CFG80211_WEXT before the driver can be selected, make the driver select the needed Kconfig symbol itself. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15ath9k: Update PCI IDs for AR9565Sujith Manoharan1-0/+85
This patch adds several new PCI IDs for AR9565. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15ath9k: enable per-packet TPC on AR9002 based chipsLorenzo Bianconi2-7/+1
Enable per-packet TPC on AR9002 based chips by default Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15ath9k: add TPC to TX path for AR9002 based chipsLorenzo Bianconi1-12/+56
Add TPC capability to TX descriptor path for AR9002 based chips. Scale per-packet TX power according to eeprom power bias, power adjustments for HT40 mode and open loop CCK rates. Cap per-packet TX power according to TX power per-rate tables Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15ath9k: add power per-rate tables for AR9002 chipsLorenzo Bianconi5-0/+125
Add TX power per-rate tables for MIMO/legacy modes for AR9002 based chips in order to cap the maximum TX power value per-rate in the TX descriptor path. Add TX power adjustments for HT40 mode, open loop CCK rates and eeprom power bias for AR9280 and later chips Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15adm8211: fix error return codeJulia Lawall1-0/+1
Return a negative error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15bcma: fix three coding style issues, more than 80 characters per lineOscar Forner Martinez1-3/+7
Three lines with more than 80 characters per line have been split in several lines. Signed-off-by: Oscar Forner Martinez <oscar.forner.martinez@gmail.com> Acked-by: Rafa? Mi?ecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entriesArend van Spriel1-100/+29
Use the helper to get rid of the file operations per debugfs file. The device driver data contains struct ieee80211_hw pointer and the struct ath9k_softc pointer is assigned to ieee80211_hw::priv so it can be accessed in the seq_file read operation. Cc: ath9k-devel@lists.ath9k.org Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: relax spinlocks in rx reorderVladimir Kondratiev4-17/+20
In the Rx reorder mechanism, nothing is done in the interrupt context, so there is no need to use 'irq' flavors of spinlock. Rx done in NAPI context (tasklet), other manipulations - in the thread context. Having interrupts enabled makes it better for the OS in general. Besides, if enslaved under bonding, bridge or team driver, Rx won't work with interrupts disabled. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: workaround for BACK establishment raceVladimir Kondratiev1-7/+18
When establishing BACK, WMI may be handled earlier then Rx, in this case late Rx will be mis-handled. Detect early Rx and pass it to the stack, bypass reordering Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: Tx/Rx descriptors documentationVladimir Kondratiev2-53/+98
Sync documentation for the Tx/Rx descriptors with the firmware/hardware documentation. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: fix reordering for MCASTVladimir Kondratiev3-9/+14
In the reordering block, Ethernet DA was checked for MCAST, this is wrong. Check instead MCAST indication from 802.11 MAC header. Hardware saves this into Rx descriptor. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: RX high threshold interrupt configurationVladimir Kondratiev3-1/+14
Rx high threshold interrupt is reported by the hardware in case when number of not utilized by the HW descriptors in the Rx ring becomes low. Introduce module parameter for RX high threshold. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: add advanced interrupt moderationVladimir Kondratiev6-46/+247
Add advanced interrupt moderation support available since "Sparrow B0". Legacy interrupt moderation used only one counter to moderate tx, rx, and misc interrupts. Advanced interrupt moderation bypasses misc, and handles separately tx and rx interrupts. In addition it has two timers for each interrupt type. Max burst duration timer which defines how long to postpone interrupt after first event (receive event for rx and tx complete event for tx), and interframe timeout which defines how to determine the end of the burst and issue interrupt even if the first timer still pending. Capabilities flags in wil_priv is set on initialization according to HW. The rest of the code checks for advanced interrupt capability bit in capabilities flags field. Debugfs is split accordingly: "legacy" interrupt moderation remains unchanged, new debugs files added for advanced interrupt moderation support. Module params are aligned to support advanced interrupt moderation (tx & rx). When not available (for legacy interrupt moderation) will use only rx configuration; Tx configuration will be ignored in this case. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: use HW capabilities mask in resetVladimir Kondratiev4-56/+36
Use the proper reset follow based on HW capabilities detection instead of chip ID. Remove old hw ID mechanism which was used only for reset flow. Remove support for Marlon A0. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: detect HW capabilitiesVladimir Kondratiev2-1/+51
Read relevant information (HW ID for now) once on init and set capabilities accordingly. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: rework debugfs for BACKVladimir Kondratiev1-17/+54
Enable more flexible control over block ack: - allow addba for any Tx vring - allow to specify block ack timeout - allow to delba for Tx or Rx side of any agreement; with reason Renamed "addba" entry to "back"; it prints short help when read; write: - "add <ringid> <agg_size> <timeout>" to trigger ADDBA If missing, <timeout> defaults to 0 - "del_tx <ringid> <reason>" to trigger DELBA for Tx side - "del_rx <CID> <TID> <reason>" to trigger DELBA for Rx side If missing, <reason> set to "STA_LEAVING" (36) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-15wil6210: fix Tx VRING for STA modeVladimir Kondratiev1-5/+41
In STA mode, all Tx should be directed to the same VRING towards the AP. Thus, look up for the 1-st eligible VRING and use it. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 07:17:54 +0300