summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-01-27mwifiex: add support for SD8801Yogesh Ashok Powar2-0/+20
SD8801 is Marvell's 1x1 802.11bgn offering. This patch adds Device IDs for SD8801 and also defines card structure which has definition for register offsets, buffer sizes etc. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Reviewed-by: James Cameron <quozl@laptop.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-27ath9k and ath9k_htc: rename variable "led_blink"Hong Xu6-8/+8
ath9k and ath9k_htc use the variable name "led_blink" to indicate whether the module parameter "blink" is on. This name is easy to conflict with other variables, and has caused a compiler error found by kbuild test bot. The compiler error is as following: drivers/net/wireless/ath/ath9k/ath9k_htc.o:(.data+0x47c): multiple definition of `led_blink' drivers/net/wireless/ath/ath9k/ath9k.o:(.bss+0x20): first defined here Fixes: 3a939a671225 ("ath9k_htc: Add a module parameter to disable blink") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Hong Xu <hong@topbug.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-27rtl8192cu: fix the mesh beaconingChun-Yeow Yeoh1-0/+1
Patch "rtlwifi: add support to send beacon frame" allows the beaconing of rtl8192cu. But mesh beaconing is not working. Fix this. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-27rtlwifi: add support to send beacon frame.Taehee Yoo1-0/+11
In AP mode, beacon frame is necessary to keep connection. this patch adds a sending beacon frame routine in initialization routine. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-27mwifiex: set netif carrier off in ndo_openJohannes Berg1-1/+2
This patch adds fix to set carrier state off during ndo_open. Carrier should be set to ON when device is ready to send data. In case of station/adhoc interface device is able to transfer data after successful association/join operation. For AP this would be after bss_active event. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23bcma: use standard bus scanning during early registerRafał Miłecki5-91/+15
Starting with kernel 3.19-rc1 early registration of bcma on MIPS is done a bit later, with memory allocator available. This allows us to simplify code by using standard bus scanning method. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23atmel: Remove open-coded and wrong strcasecmpRasmus Villemoes1-11/+1
The kernel's string library does in fact have strcasecmp, at least since ded220bd8f08 ("[STRING]: Move strcasecmp/strncasecmp to lib/string.c"). Moreover, this open-coded version is in fact wrong: If the strings only differ in their last character, a and b have already been incremented to point to the terminating NUL bytes, so they would wrongly be treated as equal. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23p54pci: add handling of signal caseNicholas Mc Guire1-2/+5
if(!wait_for_completion_interruptible_timeout(...)) only handles the timeout case - this patch adds handling the signal case the same as timeout. Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23p54: add handling of the signal caseNicholas Mc Guire1-3/+6
if(!wait_for_completion_interruptible_timeout(...)) only handles the timeout case - this patch adds handling the signal case the same as timeout. Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23ath5k: document a fall-through case in ath5k_hw_set_opmodeJohn Linville1-0/+1
Coverity: CID 114932 Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23ath9k_htc: remove dead code in error path of ath9k_htc_txcompletion_cbJohn Linville1-5/+1
This clause is conditioned on htc_hdr != NULL, but it will only be NULL when that check is reached. Coverity: CID 114318 Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23brcmfmac: Use put_unaligned_le32Vaishali Thakkar1-7/+2
This patch introduces the use of function put_unaligned_le32. This is done using Coccinelle and semantic patch used is as follows: @a@ typedef u32, __le32, uint32_t; {u32,__le32,uint32_t} e32; identifier tmp; expression ptr; expression y,e; type T; type T; @@ - tmp = cpu_to_le32(y); <+... when != tmp ( - memcpy(ptr, (T)&tmp, \(4\|sizeof(u32)\|sizeof(__le32)\|sizeof(uint32_t)\|sizeof(e32)\)); + put_unaligned_le32(y,ptr); | - memcpy(ptr, (T)&tmp, ...); + put_unaligned_le32(y,ptr); ) ...+> ? tmp = e @@ type T; identifier a.tmp; @@ - T tmp; ...when != tmp Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23bcma: clean bus initialization codeRafał Miłecki3-9/+15
This moves main bus init code to the main.c and renames old function to make its purpose clear. Thanks to this change we'll also be able to separate scanning from registration (and support PCIe Gen 2 devices) in the future. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23b43: stop leds during suspendSabrina Dubroca1-0/+1
Call b43_leds_stop during suspend to avoid this WARN: WARNING: CPU: 1 PID: 0 at net/mac80211/util.c:755 ieee80211_can_queue_work.isra.11+0x35/0x50 [mac80211]() queueing ieee80211 work while going to suspend [...] Call Trace: [<c165fb2a>] dump_stack+0x48/0x69 [<c1052f7b>] warn_slowpath_common+0x8b/0xc0 [<f9c30225>] ? ieee80211_can_queue_work.isra.11+0x35/0x50 [mac80211] [<f9c30225>] ? ieee80211_can_queue_work.isra.11+0x35/0x50 [mac80211] [<c1052fe3>] warn_slowpath_fmt+0x33/0x40 [<f9c30225>] ieee80211_can_queue_work.isra.11+0x35/0x50 [mac80211] [<f9c30260>] ieee80211_queue_work+0x20/0x40 [mac80211] [<f9f25d78>] b43_led_brightness_set+0x28/0x30 [b43] [<c14f3835>] led_timer_function+0xd5/0xe0 [<c10cb534>] call_timer_fn+0xa4/0x4a0 Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wlcore: unlock on error in wl1271_op_suspend()Dan Carpenter1-1/+3
We recently introduced a new error path which needs an unlock. Fixes: 6d5a748d4836 ('wlcore: add ability to reduce FW interrupts during suspend') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23rtlwifi/rtl8192de: remove redundant else if checkColin Ian King1-1/+1
The else if check condition checks for the opposite of the if check, hence the else if check is redundant and can be replaced with a simple else: if (rtlpriv->rtlhal.macphymode == SINGLEMAC_SINGLEPHY) { .. } else if (rtlpriv->rtlhal.macphymode != SINGLEMAC_SINGLEPHY) { .. } replaced with: if (rtlpriv->rtlhal.macphymode == SINGLEMAC_SINGLEPHY) { .. } else { .. } Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23ath9k_htc: Add a module parameter to disable blinkHong Xu3-0/+11
Add an option "blink" to enable or disable the LED blink. The default value is set to 1 so that existing users would not experience any unexpected changes. Signed-off-by: Hong Xu <hong@topbug.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: initiate TX BA sessionsBob Copeland3-2/+77
Currently, wcn36xx only asks for a TX BA session if it has already established one for RX. Thus, two wcn36xx devices cannot do a-mpdu between themselves since they both wait for the other to go first. Fix this by starting a BA session after a few QoS data frames have been sent to a STA. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: move set_tx_pdu inside set_tx_data/mgmtBob Copeland1-17/+20
The pdu is part of the buffer descriptor, so it makes sense that one function would fill both. Also, passing the whole skb instead of just the header pointer to the set_tx_data function paves the way for using its fields for ampdu setup inside set_tx_data(). Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: initialize dxe lockBob Copeland1-0/+2
The dxe lock is missing its initialization, so add it. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: initialize skb_lockBob Copeland1-0/+1
ctl->skb_lock is never initialized, a fact caught by lockdep. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: don't process 'valid' descriptorsBob Copeland1-0/+2
The DMA engine will reset the valid bit after a descriptor is complete; any with the valid bit still set may still be in use by the hardware, so check that before freeing the descriptor. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: let device generate qos seq numbersBob Copeland2-1/+9
wcn36xx currently sends an incorrect sequence number into the BA session setup firmware command: it should be saving or updating the ssn in the TX_START ampdu_action callback instead of waiting until TX_OPERATIONAL. However, we can sidestep the issue by letting the hardware generate the sequence numbers for QoS frames, as is done in prima, so do that. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: use !! when assigning int as a booleanBob Copeland1-1/+1
bd->tx_comp is a single bit in a bitfield, so assigning "info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS" only happens to work because TX_STATUS is defined to BIT(0); if it were any other bit this assignment would fail. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: initialize device defaults on startBob Copeland1-2/+71
Set up default configuration for the device when we call start. The defaults come from dumps from the prima driver for the same hardware. This fixes transmit A-MPDU; previously only one MPDU would be sent per A-MPDU due to missing MAX_MPDUS_IN_AMPDU setting. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wlcore: fix copy-paste bug: assign from src struct not destGiel van Schijndel1-1/+1
Signed-off-by: Giel van Schijndel <me@mortis.eu> Reported-at: http://www.viva64.com/en/b/0299/ Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23mwifiex: do not emit messages while holding spinlockAvinash Patil2-5/+5
Avoid printing dev_{warn/dbg} messages while holding spinlock. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23mwifiex: check driver status in connect and scan handlersAmitkumar Karwar2-0/+14
Ignore scan and connection requests from cfg80211 when driver unload is in process or previous command has timed out due to a firmware bug. This patch fixes corner case system crash issues. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23ath9k: Fix no-ack frame statusSujith Manoharan1-3/+6
Check if the frame has been completed without any error and use IEEE80211_TX_STAT_NOACK_TRANSMITTED to indicate successful transmission of no-ack frames. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23Merge tag 'iwlwifi-next-for-kalle-2015-01-22' of ↵Kalle Valo36-617/+1233
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next * more work for new devices (4165 / 8260) * cleanups / improvemnts in rate control * fixes for TDLS * major statistics work from Johannes - more to come * improvements for the fw error dump infrastructure * usual amount of small fixes here and there (scan, D0i3 etc...)
2015-01-22iwlwifi: mvm: fix rx chains configuration in phy ctxt cmdLiad Kaufman1-1/+1
In the PHY_CTXT command sent to the FW the TX chains were indeed configured by the values of both FW TLVs and of NVM, but the RX chains were left out and configured only by FW TLV. This causes problems in 4165 HW, where there are 1x1 antennas, and the wrong configuration denies the driver from connecting to the AP. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: pcie: support secured boot flow for family 8000 B stepEran Harary1-3/+5
The driver loads the 2 CPU sections, then it needs to let the firmware know to start the authentication of the sections. This is done by writing the relevants bits to FH_UCODE_LOAD_STATUS. For CPU1, the driver sets the lower 16 bits. For both CPUs, the driver sets all the 32 bits. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: rs: remove stats argument from functionsJohannes Berg3-26/+72
The stats argument is always only passed as &mvm->drv_rx_stats, so there's no point in passing it when the mvm pointer is passed. Remove the argument entirely. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: use a new API for enabling STBCEyal Shapira3-3/+28
The new API tells the FW that it's allowed to use STBC but the FW will decide on its own whether to use STBC or SISO (and in the future Beamformer). Keep support for the old API which sets STBC explicitly in the rates in the LQ table while we still support old FW revisions. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: rs: refactor ht/vht initEyal Shapira1-38/+4
Prepare to add some more code there so refactor to separate functions. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: really disable TDLS queuesEmmanuel Grumbach1-2/+2
for_each_set_bit expect the size in number of bits and not in bytes. Fixes: a0f6bf2a5b01 ("iwlwifi: mvm: use private TFD queues for TDLS stations") Reviewed-by: Arik Nemtsov <arik@wizery.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: Do not consider invalid HW queues in queue maskIlan Peer1-2/+4
The iwl_mvm_mac_get_queues_mask() added vif->hw_queue[ac] to the queue mask although it might be set to IEEE80211_INVAL_HW_QUEUE. Fix it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: BT Coex - set all the co-running values to 0Emmanuel Grumbach2-16/+16
With this value, we de-facto disable the feature. Since it is not working yet, disable it completely. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: support family 8000 C stepEran Harary3-2/+3
C step functionality in the driver is exactly the same as B step besides the ucode name that present as iwlwifi-8000C-xx.ucode instead of iwlwifi-8000B-xx.ucode Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: pcie: init ref_lockJohannes Berg1-0/+1
The ref_lock that was recently added is missing initialization which makes lockdep unhappy and is generally a bad idea. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: document switch case fall-through in iwl_mvm_send_sta_keyJohn W. Linville1-0/+1
Add a comment indicating that the WLAN_CIPHER_SUITE_WEP104 case falls through to the WLAN_CIPHER_SUITE_WEP40 case in iwl_mvm_send_sta_key. This will document that the lack of a break is intentional. Coverity: CID 1260023 Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: rs: use STBC regardless of power save modeEyal Shapira1-8/+0
Tx STBC was used only when in CAM mode or if powersave is disabled. Effectively this meant we never used STBC as these modes aren't used on most platforms by default. Change that. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22Revert "iwlwifi: mvm: drop non VO frames when flushing"Emmanuel Grumbach1-9/+11
This is now implemented by mac80211 (commit below). mac80211 will flush/drop the frames on the queues before suspending / disconnecting. It will then send the deauth and wait until the queues are empty. commit 3b24f4c65386dc0f2efb41027bc6e410ea2c0049 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Wed Jan 7 15:42:39 2015 +0200 mac80211: let flush() drop packets when possible This reverts commit 4e6c48e0984e28d064ee8fbc292aee7b7920c507.
2015-01-22iwlwifi: mvm: add support for new LTR commandEmmanuel Grumbach3-9/+51
This new command will give finer granularity to configure the platform. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: BT Coex - fine tune the MPLUT registerEmmanuel Grumbach1-1/+1
This allow to better preserve the BT performance while WiFi is running. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22Merge remote-tracking branch 'iwlwifi-fixes/master' into iwlwifi-nextEmmanuel Grumbach12-46/+112
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Conflicts: drivers/net/wireless/iwlwifi/iwl-fw-file.h drivers/net/wireless/iwlwifi/mvm/scan.c
2015-01-22iwlwifi: mvm: move U-APSD decision to authenticationJohannes Berg2-5/+16
In order to change the usage of U-APSD on the fly later, move the enabling condition into a new function that is called when authenticated. This allows the module parameter to become writable, it won't take effect immediately but at least on the next association the new value will be used. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22Merge tag 'tags/mac80211-next-for-davem-2015-01-19' into iwlwifi-nextEmmanuel Grumbach94-1043/+2086
Some further updates for net-next: * fix network-manager which was broken by the previous changes * fix delete-station events, which were broken by me making the genlmsg_end() mistake * fix a timer left running during suspend in some race conditions that would cause an annoying (but harmless) warning * (less important, but in the tree already) remove 80+80 MHz rate reporting since the spec doesn't distinguish it from 160 MHz; as the bitrate they're both 160 MHz bandwidth
2015-01-22iwlwifi: mvm: ignore temperature updates in the RX statistics notificationLuciano Coelho2-1/+7
If the firmware sends spontaneous DTS notfications with the temperature (indicated in a TLV), we can ignore the temperature we get in the RX statistics notifications. This prevents potentially handling the same temperature change twice. It also ignores notifications with temperature equal to 0 that happens from time to time. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-01-22iwlwifi: mvm: rs: cleanup unuseful and overflowing tracesEyal Shapira1-3/+1
These aren't useful and overflowing so drop them and also fix a minor typo. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 14:29:08 +0300