summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-03-17net: mvneta: Add support for 98DX2530 Ethernet portChris Packham1-0/+12
The 98DX2530 SoC is similar to the Armada 3700 except it needs a different MBUS window configuration. Add a new compatible string to identify this device and the required MBUS window configuration. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-17dt-bindings: net: mvneta: Add marvell,armada-ac5-netaChris Packham1-0/+1
The out of band port on the 98DX2530 SoC is similar to the armada-3700 except it requires a slightly different MBUS window configuration. Add a new compatible string so this difference can be accounted for. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-17ptp: ocp: Fix PTP_PF_* verification requestsJonathan Lemon1-8/+20
Update and check functionality for pin configuration requests: PTP_PF_NONE: requests "IN: None", disabling the pin. # testptp -d /dev/ptp3 -L3,0 -i1 set pin function okay # cat sma4 IN: None PTP_PF_EXTTS: should configure external timestamps, but since the timecard can steer inputs to multiple inputs as well as timestamps, allow the request, but don't change configurations. # testptp -d /dev/ptp3 -L3,1 -i1 set pin function okay (no functional or configuration change here yet) PTP_PF_PEROUT: Channel 0 is the PHC, at 1PPS. Channels 1-4 are the programmable frequency generators. # fails because period is not 1PPS. # testptp -d /dev/ptp3 -L3,2 -i0 -p 500000000 PTP_PEROUT_REQUEST: Invalid argument # testptp -d /dev/ptp3 -L3,2 -i0 -p 1000000000 periodic output request okay # cat sma4 OUT: PHC # testptp -d /dev/ptp3 -L3,2 -i1 -p 500000000 -w 200000000 periodic output request okay # cat sma4 OUT: GEN1 # cat gen1/signal 500000000 40 0 1 2022-03-10T23:55:26 TAI # cat gen1/running 1 # testptp -d /dev/ptp3 -L3,2 -i1 -p 0 periodic output request okay # cat gen1/running 0 Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Link: https://lore.kernel.org/r/20220315194626.1895-1-jonathan.lemon@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-17Merge branch 'flow_offload-add-tc-vlan-push_eth-and-pop_eth-actions'Jakub Kicinski14-70/+82
Roi Dayan says: ==================== flow_offload: add tc vlan push_eth and pop_eth actions Offloading vlan push_eth and pop_eth actions is needed in order to correctly offload MPLSoUDP encap and decap flows, this series extends the flow offload API to support these actions and updates mlx5 to parse them. ==================== Link: https://lore.kernel.org/r/20220315110211.1581468-1-roid@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17net/mlx5e: MPLSoUDP encap, support action vlan pop_eth explicitlyMaor Dickman4-0/+10
Currently the MPLSoUDP encap offload does the L2 pop implicitly while adding such action explicitly (vlan eth_push) will cause the rule to not be offloaded. Solve it by adding offload support for vlan eth_push in case of MPLSoUDP decap case. Flow example: filter root protocol ip pref 1 flower chain 0 filter root protocol ip pref 1 flower chain 0 handle 0x1 eth_type ipv4 dst_ip 2.2.2.22 src_ip 2.2.2.21 in_hw in_hw_count 1 action order 1: vlan pop_eth pipe index 1 ref 1 bind 1 used_hw_stats delayed action order 2: mpls push protocol mpls_uc label 555 tc 3 ttl 255 pipe index 1 ref 1 bind 1 used_hw_stats delayed action order 3: tunnel_key set src_ip 8.8.8.21 dst_ip 8.8.8.22 dst_port 6635 csum tos 0x4 ttl 6 pipe index 1 ref 1 bind 1 used_hw_stats delayed action order 4: mirred (Egress Redirect to device bareudp0) stolen index 1 ref 1 bind 1 used_hw_stats delayed Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17net/mlx5e: MPLSoUDP decap, use vlan push_eth instead of peditMaor Dickman11-70/+43
Currently action pedit of source and destination MACs is used to fill the MACs in L2 push step in MPLSoUDP decap offload, this isn't aligned to tc SW which use vlan eth_push action to do this. To fix that, offload support for vlan veth_push action is added together with mpls pop action, and deprecate the use of pedit of MACs. Flow example: filter protocol mpls_uc pref 1 flower chain 0 filter protocol mpls_uc pref 1 flower chain 0 handle 0x1 eth_type 8847 mpls_label 555 enc_dst_port 6635 in_hw in_hw_count 1 action order 1: tunnel_key unset pipe index 2 ref 1 bind 1 used_hw_stats delayed action order 2: mpls pop protocol ip pipe index 2 ref 1 bind 1 used_hw_stats delayed action order 3: vlan push_eth dst_mac de:a2:ec:d6:69:c8 src_mac de:a2:ec:d6:69:c8 pipe index 2 ref 1 bind 1 used_hw_stats delayed action order 4: mirred (Egress Redirect to device enp8s0f0_0) stolen index 2 ref 1 bind 1 used_hw_stats delayed Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17net/sched: add vlan push_eth and pop_eth action to the hardware IRMaor Dickman3-0/+29
Add vlan push_eth and pop_eth action to the hardware intermediate representation model which would subsequently allow it to be used by drivers for offload. Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17net: handle ARPHRD_PIMREG in dev_is_mac_header_xmit()Nicolas Dichtel1-0/+1
This kind of interface doesn't have a mac header. This patch fixes bpf_redirect() to a PIM interface. Fixes: 27b29f63058d ("bpf: add bpf_redirect() helper") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20220315092008.31423-1-nicolas.dichtel@6wind.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17net: dsa: Never offload FDB entries on standalone portsTobias Waldekranz1-0/+3
If a port joins a bridge that it can't offload, it will fallback to standalone mode and software bridging. In this case, we never want to offload any FDB entries to hardware either. Previously, for host addresses, we would eventually end up in dsa_port_bridge_host_fdb_add, which would unconditionally dereference dp->bridge and cause a segfault. Fixes: c26933639b54 ("net: dsa: request drivers to perform FDB isolation") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220315233033.1468071-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17phy: Remove duplicated include in phy-fsl-lynx-28g.cYang Li1-1/+0
Fix following includecheck warning: ./drivers/phy/freescale/phy-fsl-lynx-28g.c: linux/workqueue.h is included more than once. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20220315235603.59481-1-yang.lee@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17net: mv643xx_eth: undo some opreations in mv643xx_eth_probeMinghao Chi1-2/+4
Cannot directly return platform_get_irq return irq, there are operations that need to be undone. Fixes: bf2b83425b59 ("net: mv643xx_eth: use platform_get_irq() instead of platform_get_resource()") Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220316012444.2126070-1-chi.minghao@zte.com.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17net: hns3: Fix spelling mistake "does't" -> "doesn't"Colin Ian King1-1/+1
There is a spelling mistake in a dev_warn message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220315222914.2960786-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17gve: Fix spelling mistake "droping" -> "dropping"Colin Ian King1-1/+1
There is a spelling mistake in a netdev_warn warning. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220315222615.2960504-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17net: ksz884x: optimize netdev_open flow and remove static variablewujunwen1-5/+4
remove the static next_jiffies variable, and reinitialize next_jiffies to simplify netdev_open Signed-off-by: wujunwen <wudaemon@163.com> Link: https://lore.kernel.org/r/20220315122857.78601-1-wudaemon@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17hamradio: Fix wrong assignment of 'bbc->cfg.loopback'Meng Tang1-2/+2
In file hamradio/baycom_epp.c, the baycom_setmode interface, there is a problem with improper use of strstr. Suppose that when modestr="noloopback", both conditions which are 'strstr(modestr,"noloopback")' and 'strstr(modestr,"loopback")' will be true(not NULL), this lead the bc->cfg.loopback variable will be first assigned to 0, and then reassigned to 1. This will cause 'bc->cfg.loopback = 0' will never take effect. That obviously violates the logic of the code, so adjust the order of their execution to solve the problem. Signed-off-by: Meng Tang <tangmeng@uniontech.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220315074851.6456-1-tangmeng@uniontech.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17bareudp: use ipv6_mod_enabled to check if IPv6 enabledHangbin Liu1-9/+10
bareudp_create_sock() use AF_INET6 by default if IPv6 CONFIG enabled. But if user start kernel with ipv6.disable=1, the bareudp sock will created failed, which cause the interface open failed even with ethertype ip. e.g. # ip link add bareudp1 type bareudp dstport 2 ethertype ip # ip link set bareudp1 up RTNETLINK answers: Address family not supported by protocol Fix it by using ipv6_mod_enabled() to check if IPv6 enabled. There is no need to check IS_ENABLED(CONFIG_IPV6) as ipv6_mod_enabled() will return false when CONFIG_IPV6 no enabled in include/linux/ipv6.h. Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20220315062618.156230-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17Merge tag 'linux-can-next-for-5.18-20220316' of ↵Jakub Kicinski4-95/+203
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2022-03-16 the first 3 patches are by Oliver Hartkopp target the CAN ISOTP protocol and fix a problem found by syzbot in isotp_bind(), return -EADDRNOTAVAIL in unbound sockets in isotp_recvmsg() and add support for MSG_TRUNC to isotp_recvmsg(). Amit Kumar Mahapatra converts the xilinx,can device tree bindings to yaml. The last patch is by Julia Lawall and fixes typos in the ucan driver. * tag 'linux-can-next-for-5.18-20220316' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: ucan: fix typos in comments dt-bindings: can: xilinx_can: Convert Xilinx CAN binding to YAML can: isotp: support MSG_TRUNC flag when reading from socket can: isotp: return -EADDRNOTAVAIL when reading from unbound socket can: isotp: sanitize CAN ID checks in isotp_bind() ==================== Link: https://lore.kernel.org/r/20220316204710.716341-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16can: ucan: fix typos in commentsJulia Lawall1-2/+2
Various spelling mistakes in comments. Detected with the help of Coccinelle. Link: https://lore.kernel.org/all/20220314115354.144023-28-Julia.Lawall@inria.fr Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-16dt-bindings: can: xilinx_can: Convert Xilinx CAN binding to YAMLAmit Kumar Mahapatra2-61/+161
Convert Xilinx CAN binding documentation to YAML. Link: https://lore.kernel.org/all/20220316171105.17654-1-amit.kumar-mahapatra@xilinx.com Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-16can: isotp: support MSG_TRUNC flag when reading from socketOliver Hartkopp1-12/+15
When providing the MSG_TRUNC flag via recvmsg() syscall the return value provides the real length of the packet or datagram, even when it was longer than the passed buffer. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://github.com/linux-can/can-utils/issues/347#issuecomment-1065932671 Link: https://lore.kernel.org/all/20220316164258.54155-3-socketcan@hartkopp.net Suggested-by: Derek Will <derekrobertwill@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-16can: isotp: return -EADDRNOTAVAIL when reading from unbound socketOliver Hartkopp1-0/+4
When reading from an unbound can-isotp socket the syscall blocked indefinitely. As unbound sockets (without given CAN address information) do not make sense anyway we directly return -EADDRNOTAVAIL on read() analogue to the known behavior from sendmsg(). Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://github.com/linux-can/can-utils/issues/349 Link: https://lore.kernel.org/all/20220316164258.54155-2-socketcan@hartkopp.net Suggested-by: Derek Will <derekrobertwill@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-16can: isotp: sanitize CAN ID checks in isotp_bind()Oliver Hartkopp1-20/+21
Syzbot created an environment that lead to a state machine status that can not be reached with a compliant CAN ID address configuration. The provided address information consisted of CAN ID 0x6000001 and 0xC28001 which both boil down to 11 bit CAN IDs 0x001 in sending and receiving. Sanitize the SFF/EFF CAN ID values before performing the address checks. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/all/20220316164258.54155-1-socketcan@hartkopp.net Reported-by: syzbot+2339c27f5c66c652843e@syzkaller.appspotmail.com Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-16mt76: fix monitor rx FCS error in DFS channelDeren Wu3-3/+6
When setup monitor mode in DFS channel, mt76 send CH_SWITCH_DFS to fw for channel config. This would cause rx performance bad while monitoring frames. Settings CH_SWITCH_NORMAL in monitor mode would get the same performance as normal channels. Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7921: don't enable beacon filter when IEEE80211_CONF_CHANGE_MONITOR ↵Sean Wang1-3/+10
is set IEEE80211_CONF_CHANGE_MONITOR would be set every time even when vif runs as sta mode. If vif runs as sta mode, the beacon filter would be falsely enabled earlier than the associated state. That is not the behavior the firmware expects and also breaks the original logic of sta mode. Thus, we only limit the operation to set the beacon filter only for monitor mode when IEEE80211_CONF_CHANGE_MONITOR is set. Fixes: 4ad65a54617c ("mt76: mt7921: toggle runtime-pm adding a monitor vif") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: fix wrong HE data rate in sniffer toolDeren Wu2-4/+8
Due to the missing IEEE80211_RADIOTAP_HE_DATA1_BW_RU_ALLOC_KNOWN in status report, the HE rate in wirehsark/tcpdump always shows wrong value. Applications will refer to IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC when the flag is set and shows the correct data rate. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7915: introduce 802.11ax multi-bss supportLorenzo Bianconi3-5/+70
Introduce mbss mcu APIs to enable 802.11ax multi-bss AP support for mt7915 devices Tested-by: Money Wang <money.wang@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Co-developed-by: Money Wang <money.wang@mediatek.com> Signed-off-by: Money Wang <money.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16Merge branch 'devlink-expose-instance-locking-and-simplify-port-splitting'Jakub Kicinski16-171/+208
Jakub Kicinski says: ==================== devlink: expose instance locking and simplify port splitting This series puts the devlink ports fully under the devlink instance lock's protection. As discussed in the past it implements my preferred solution of exposing the instance lock to the drivers. This way drivers which want to support port splitting can lock the devlink instance themselves on the probe path, and we can take that lock in the core on the split/unsplit paths. nfp and mlxsw are converted, with slightly deeper changes done in nfp since I'm more familiar with that driver. Now that the devlink port is protected we can pass a pointer to the drivers, instead of passing a port index and forcing the drivers to do their own lookups. Both nfp and mlxsw can container_of() to their own structures. ==================== Link: https://lore.kernel.org/r/20220315060009.1028519-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16devlink: pass devlink_port to port_split / port_unsplit callbacksJakub Kicinski6-83/+35
Now that devlink ports are protected by the instance lock it seems natural to pass devlink_port as an argument to the port_split / port_unsplit callbacks. This should save the drivers from doing a lookup. In theory drivers may have supported unsplitting ports which were not registered prior to this change. Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16devlink: hold the instance lock in port_split / port_unsplit callbacksJakub Kicinski3-33/+8
Let the core take the devlink instance lock around port splitting and remove the now redundant locking in the drivers. Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16eth: mlxsw: switch to explicit locking for port registrationJakub Kicinski3-2/+22
Explicitly lock the devlink instance and use devl_ API. This will be used by the subsequent patch to invoke .port_split / .port_unsplit callbacks with devlink instance lock held. Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16eth: nfp: replace driver's "pf" lock with devlink instance lockJakub Kicinski6-41/+48
The whole reason for existence of the pf mutex is that we could not lock the devlink instance around port splitting. There are more types of reconfig which can make ports appear or disappear. Now that the devlink instance lock is exposed to drivers and "locked" helpers exist we can switch to using the devlink lock directly. Next patches will move the locking inside .port_(un)split to the core. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16eth: nfp: wrap locking assertions in helpersJakub Kicinski4-5/+14
We can replace the PF lock with devlink instance lock in subsequent changes. To make the patches easier to comprehend and limit line lengths - factor out the existing locking assertions. No functional changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16devlink: expose instance locking and add locked port registeringJakub Kicinski3-24/+98
It should be familiar and beneficial to expose devlink instance lock to the drivers. This way drivers can block devlink from calling them during critical sections without breakneck locking. Add port helpers, port splitting callbacks will be the first target. Use 'devl_' prefix for "explicitly locked" API. Initial RFC used '__devlink' but that's too much typing. devl_lock_is_held() is not defined without lockdep, which is the same behavior as lockdep_is_held() itself. Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16Merge tag 'efi-urgent-for-v5.17-3' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fix from Ard Biesheuvel: "Avoid spurious warnings about unknown boot parameters" * tag 'efi-urgent-for-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: fix return value of __setup handlers
2022-03-16Merge branch 'linus' of ↵Linus Torvalds1-7/+10
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a bug where qcom-rng can return a buffer that is not completely filled with random data" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: qcom-rng - ensure buffer for generate is completely filled
2022-03-16Merge branch 'master' of ↵Jakub Kicinski2-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2022-03-16 1) Fix a kernel-info-leak in pfkey. From Haimin Zhang. 2) Fix an incorrect check of the return value of ipv6_skip_exthdr. From Sabrina Dubroca. * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec: esp6: fix check on ipv6_skip_exthdr's return value af_key: add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register ==================== Link: https://lore.kernel.org/r/20220316121142.3142336-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16Merge tag 'wireless-2022-03-16' of ↵Jakub Kicinski1-32/+1
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v5.17 Third set of fixes for v5.17. We have only one revert to fix an ath10k regression. * tag 'wireless-2022-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: Revert "ath10k: drop beacon and probe response which leak from other channel" ==================== Link: https://lore.kernel.org/r/20220316130249.B5225C340EC@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16ice: add trace events for tx timestampsJacob Keller2-0/+32
We've previously run into many issues related to the latency of a Tx timestamp completion with the ice hardware. It can be difficult to determine the root cause of a slow Tx timestamp. To aid in this, introduce new trace events which capture timing data about when the driver reaches certain points while processing a transmit timestamp * ice_tx_tstamp_request: Trace when the stack initiates a new timestamp request. * ice_tx_tstamp_fw_req: Trace when the driver begins a read of the timestamp register in the work thread. * ice_tx_tstamp_fw_done: Trace when the driver finishes reading a timestamp register in the work thread. * ice_tx_tstamp_complete: Trace when the driver submits the skb back to the stack with a completed Tx timestamp. These trace events can be enabled using the standard trace event subsystem exposed by the ice driver. If they are disabled, they become no-ops with no run time cost. The following is a simple GNU AWK script which can highlight one potential way to use the trace events to capture latency data from the trace buffer about how long the driver takes to process a timestamp: ----- BEGIN { PREC=256 } # Detect requests /tx_tstamp_request/ { time=strtonum($4) skb=$7 # Store the time of request for this skb requests[skb] = time printf("skb %s: idx %d at %.6f\n", skb, idx, time) } # Detect completions /tx_tstamp_complete/ { time=strtonum($4) skb=$7 idx=$9 if (skb in requests) { latency = (time - requests[skb]) * 1000 printf("skb %s: %.3f to complete\n", skb, latency) if (latency > 4) { printf(">>> HIGH LATENCY <<<\n") } printf("\n") } else { printf("!!! skb %s (idx %d) at %.6f\n", skb, idx, time) } } ----- Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-16ice: fix return value check in ice_gnss.cYang Yingliang1-2/+2
kthread_create_worker() and tty_alloc_driver() return ERR_PTR() and never return NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 43113ff73453 ("ice: add TTY for GNSS module for E810T device") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-16ice: Fix inconsistent indenting in ice_switchWojciech Drewek1-1/+1
Fix the following warning as reported by smatch: smatch warnings: drivers/net/ethernet/intel/ice/ice_switch.c:5568 ice_find_dummy_packet() warn: inconsistent indenting Fixes: 9a225f81f540 ("ice: Support GTP-U and GTP-C offload in switchdev") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-16mt76: mt7921: move mt7921_init_hw in a dedicated workLorenzo Bianconi5-19/+48
Firmware initialization can take a while. Move mt7921_init_hw routine in a dedicated work in order to not slow down bootstrap process. Tested-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7921: add mt7921u driverLorenzo Bianconi9-3/+635
Introduce support for MT7921U 802.11ax 2x2:2SS wireless devices. Tested-by: Sean Wang <sean.wang@mediatek.com> Tested-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7921: move mt7921_usb_sdio_tx_status_data in mac common code.Lorenzo Bianconi4-13/+14
This is a preliminary patch to add mt7921u driver support. Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7921: move mt7921_usb_sdio_tx_complete_skb in common mac code.Lorenzo Bianconi4-21/+24
This is a preliminary patch to add mt7921u driver support. Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7921: move mt7921_usb_sdio_tx_prepare_skb in common mac codeLorenzo Bianconi4-58/+64
This is a preliminary patch to add mt7921u driver support. Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7921: update mt7921_skb_add_usb_sdio_hdr to support usbLorenzo Bianconi3-6/+8
This is a preliminary patch to add mt7921u driver support. Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: mt7921: disable runtime pm for usbLorenzo Bianconi2-4/+12
Runtime-pm is not currently supported by usb driver Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: usb: introduce __mt76u_init utility routineLorenzo Bianconi5-86/+110
Introduce __mt76u_init unitility routine and move mt7615 usb bus ops into mt7615 module in order to allow specifying driver specific parameter. This is a preliminary patch to add usb support to mt7921 driver. Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: usb: add req_type to ___mt76u_wr signatureLorenzo Bianconi1-8/+9
This is a preliminary patch to add usb support to mt7921 driver. Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-03-16mt76: usb: add req_type to ___mt76u_rr signatureLorenzo Bianconi1-8/+10
This is a preliminary patch to add usb support to mt7921 driver. Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 13:05:38 +0300