summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-10-12r8152: select CRC32 and CRYPTO/CRYPTO_HASH/CRYPTO_SHA256Vegard Nossum1-0/+4
Fix the following build/link errors by adding a dependency on CRYPTO, CRYPTO_HASH, CRYPTO_SHA256 and CRC32: ld: drivers/net/usb/r8152.o: in function `rtl8152_fw_verify_checksum': r8152.c:(.text+0x2b2a): undefined reference to `crypto_alloc_shash' ld: r8152.c:(.text+0x2bed): undefined reference to `crypto_shash_digest' ld: r8152.c:(.text+0x2c50): undefined reference to `crypto_destroy_tfm' ld: drivers/net/usb/r8152.o: in function `_rtl8152_set_rx_mode': r8152.c:(.text+0xdcb0): undefined reference to `crc32_le' Fixes: 9370f2d05a2a1 ("r8152: support request_firmware for RTL8153") Fixes: ac718b69301c7 ("net/usb: new driver for RTL8152") Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12net: dsa: mv88e6xxx: don't use PHY_DETECT on internal PHY'sMaarten Zanders1-2/+11
mv88e6xxx_port_ppu_updates() interpretes data in the PORT_STS register incorrectly for internal ports (ie no PPU). In these cases, the PHY_DETECT bit indicates link status. This results in forcing the MAC state whenever the PHY link goes down which is not intended. As a side effect, LED's configured to show link status stay lit even though the physical link is down. Add a check in mac_link_down and mac_link_up to see if it concerns an external port and only then, look at PPU status. Fixes: 5d5b231da7ac (net: dsa: mv88e6xxx: use PHY_DETECT in mac_link_up/mac_link_down) Reported-by: Maarten Zanders <m.zanders@televic.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Maarten Zanders <maarten.zanders@mind.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12net: hns3: debugfs add support dumping page pool infoHao Chen2-0/+75
Add a file node "page_pool_info" for debugfs, then cat this file node to dump page pool info as below: QUEUE_ID ALLOCATE_CNT FREE_CNT POOL_SIZE(PAGE_NUM) ORDER NUMA_ID MAX_LEN 0 512 0 512 0 2 4K 1 512 0 512 0 2 4K 2 512 0 512 0 2 4K 3 512 0 512 0 2 4K 4 512 0 512 0 2 4K Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12tulip: fix setting device address from romJakub Kicinski2-2/+2
I missed removing i from the array index when converting from a loop to a direct copy. Fixes: ca8793175564 ("ethernet: tulip: remove direct netdev->dev_addr writes") Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12Merge branch 'Managed-Neighbor-Entries'David S. Miller3-78/+187
Daniel Borkmann says: ==================== Managed Neighbor Entries This series adds a couple of fixes related to NTF_EXT_LEARNED and NTF_USE neighbor flags, extends the UAPI with a new NDA_FLAGS_EXT netlink attribute in order to be able to add new neighbor flags from user space given all current struct ndmsg / ndm_flags bits are used up. Finally, the core of this series adds a new NTF_EXT_MANAGED flag to neighbors, which allows user space control planes to add 'managed' neighbor entries. Meaning, user space may either transition existing entries or can push down new L3 entries without lladdr into the kernel where the latter will periodically try to keep such NTF_EXT_MANAGED managed entries in reachable state. Main use case for this series are XDP / tc BPF load-balancers which make use of the bpf_fib_lookup() helper for backends. For more details, please see individual patches. Thanks! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12net, neigh: Add NTF_MANAGED flag for managed neighbor entriesDaniel Borkmann3-48/+120
Allow a user space control plane to insert entries with a new NTF_EXT_MANAGED flag. The flag then indicates to the kernel that the neighbor entry should be periodically probed for keeping the entry in NUD_REACHABLE state iff possible. The use case for this is targeting XDP or tc BPF load-balancers which use the bpf_fib_lookup() BPF helper in order to piggyback on neighbor resolution for their backends. Given they cannot be resolved in fast-path, a control plane inserts the L3 (without L2) entries manually into the neighbor table and lets the kernel do the neighbor resolution either on the gateway or on the backend directly in case the latter resides in the same L2. This avoids to deal with L2 in the control plane and to rebuild what the kernel already does best anyway. NTF_EXT_MANAGED can be combined with NTF_EXT_LEARNED in order to avoid GC eviction. The kernel then adds NTF_MANAGED flagged entries to a per-neighbor table which gets triggered by the system work queue to periodically call neigh_event_send() for performing the resolution. The implementation allows migration from/to NTF_MANAGED neighbor entries, so that already existing entries can be converted by the control plane if needed. Potentially, we could make the interval for periodically calling neigh_event_send() configurable; right now it's set to DELAY_PROBE_TIME which is also in line with mlxsw which has similar driver-internal infrastructure c723c735fa6b ("mlxsw: spectrum_router: Periodically update the kernel's neigh table"). In future, the latter could possibly reuse the NTF_MANAGED neighbors as well. Example: # ./ip/ip n replace 192.168.178.30 dev enp5s0 managed extern_learn # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a managed extern_learn REACHABLE [...] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Roopa Prabhu <roopa@nvidia.com> Link: https://linuxplumbersconf.org/event/11/contributions/953/ Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12net, neigh: Extend neigh->flags to 32 bit to allow for extensionsRoopa Prabhu3-20/+50
Currently, all bits in struct ndmsg's ndm_flags are used up with the most recent addition of 435f2e7cc0b7 ("net: bridge: add support for sticky fdb entries"). This makes it impossible to extend the neighboring subsystem with new NTF_* flags: struct ndmsg { __u8 ndm_family; __u8 ndm_pad1; __u16 ndm_pad2; __s32 ndm_ifindex; __u16 ndm_state; __u8 ndm_flags; __u8 ndm_type; }; There are ndm_pad{1,2} attributes which are not used. However, due to uncareful design, the kernel does not enforce them to be zero upon new neighbor entry addition, and given they've been around forever, it is not possible to reuse them today due to risk of breakage. One option to overcome this limitation is to add a new NDA_FLAGS_EXT attribute for extended flags. In struct neighbour, there is a 3 byte hole between protocol and ha_lock, which allows neigh->flags to be extended from 8 to 32 bits while still being on the same cacheline as before. This also allows for all future NTF_* flags being in neigh->flags rather than yet another flags field. Unknown flags in NDA_FLAGS_EXT will be rejected by the kernel. Co-developed-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12net, neigh: Enable state migration between NUD_PERMANENT and NTF_USEDaniel Borkmann2-9/+14
Currently, it is not possible to migrate a neighbor entry between NUD_PERMANENT state and NTF_USE flag with a dynamic NUD state from a user space control plane. Similarly, it is not possible to add/remove NTF_EXT_LEARNED flag from an existing neighbor entry in combination with NTF_USE flag. This is due to the latter directly calling into neigh_event_send() without any meta data updates as happening in __neigh_update(). Thus, to enable this use case, extend the latter with a NEIGH_UPDATE_F_USE flag where we break the NUD_PERMANENT state in particular so that a latter neigh_event_send() is able to re-resolve a neighbor entry. Before fix, NUD_PERMANENT -> NUD_* & NTF_USE: # ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT [...] # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT [...] As can be seen, despite the admin-triggered replace, the entry remains in the NUD_PERMANENT state. After fix, NUD_PERMANENT -> NUD_* & NTF_USE: # ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT [...] # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE [...] # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn STALE [...] # ./ip/ip n replace 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a PERMANENT [...] After the fix, the admin-triggered replace switches to a dynamic state from the NTF_USE flag which triggered a new neighbor resolution. Likewise, we can transition back from there, if needed, into NUD_PERMANENT. Similar before/after behavior can be observed for below transitions: Before fix, NTF_USE -> NTF_USE | NTF_EXT_LEARNED -> NTF_USE: # ./ip/ip n replace 192.168.178.30 dev enp5s0 use # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE [...] # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE [...] After fix, NTF_USE -> NTF_USE | NTF_EXT_LEARNED -> NTF_USE: # ./ip/ip n replace 192.168.178.30 dev enp5s0 use # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE [...] # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE [...] # ./ip/ip n replace 192.168.178.30 dev enp5s0 use # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE [..] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12net, neigh: Fix NTF_EXT_LEARNED in combination with NTF_USEDaniel Borkmann1-12/+14
The NTF_EXT_LEARNED neigh flag is usually propagated back to user space upon dump of the neighbor table. However, when used in combination with NTF_USE flag this is not the case despite exempting the entry from the garbage collector. This results in inconsistent state since entries are typically marked in neigh->flags with NTF_EXT_LEARNED, but here they are not. Fix it by propagating the creation flag to ___neigh_create(). Before fix: # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE [...] After fix: # ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn # ./ip/ip n 192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE [...] Fixes: 9ce33e46531d ("neighbour: support for NTF_EXT_LEARNED flag") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12net: hns: Prefer struct_size over open coded arithmeticLen Baker3-5/+4
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, take the opportunity to refactor the hnae_handle structure to switch the last member to flexible array, changing the code accordingly. Also, fix the comment in the hnae_vf_cb structure to inform that the ae_handle member must be the last member. Then, use the struct_size() helper to do the arithmetic instead of the argument "size + count * size" in the kzalloc() function. This code was detected with the help of Coccinelle and audited and fixed manually. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Signed-off-by: Len Baker <len.baker@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12net: mscc: ocelot: Fix dumplicated argument in ocelotWan Jiabing2-3/+3
Fix the following coccicheck warning: drivers/net/ethernet/mscc/ocelot.c:474:duplicated argument to & or | drivers/net/ethernet/mscc/ocelot.c:476:duplicated argument to & or | drivers/net/ethernet/mscc/ocelot_net.c:1627:duplicated argument to & or | These DEV_CLOCK_CFG_MAC_TX_RST are duplicate here. Here should be DEV_CLOCK_CFG_MAC_RX_RST. Fixes: e6e12df625f2 ("net: mscc: ocelot: convert to phylink") Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12Merge branch 'mlxsw-ECN-mirroring'David S. Miller7-36/+220
Ido Schimmel says: ==================== mlxsw: Add support for ECN mirroring Petr says: Patches in this set have been floating around for some time now together with trap_fwd support. That will however need more work, time for which is nowhere to be found, apparently. Instead, this patchset enables offload of only packet mirroring on RED mark qevent, enabling mirroring of ECN-marked packets. Formally it enables offload of filters added to blocks bound to the RED qevent mark if: - The switch ASIC is Spectrum-2 or above. - Only a single filter is attached at the block, at chain 0 (the default), and its classifier is matchall. - The filter has hw_stats set to disabled. - The filter has a single action, which is mirror. This differs from early_drop qevent offload, which supports mirroring and trapping. However trapping in context of ECN-marked packets is not suitable, because the HW does not drop the packet, as the trap action implies. And there is as of now no way to express only the part of trapping that transfers the packet to the SW datapath, sans the HW-datapath drop. The patchset progresses as follows: Patch #1 is an extack propagation. Mirroring of ECN-marked packets is configured in the ASIC through an ECN trigger, which is considered "egress", unlike the EARLY_DROP trigger. In patch #2, add a helper to classify triggers as ingress. As clarified above, traps cannot be offloaded on mark qevent. Similarly, given a trap_fwd action, it would not be offloadable on early_drop qevent. In patch #3, introduce support for tracking actions permissible on a given block. Patch #4 actually adds the mark qevent offload. In patch #5, fix a small style issue in one of the selftests, and in patch #6 add mark offload selftests. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12selftests: mlxsw: RED: Add selftests for the mark qeventPetr Machata2-5/+122
Add do_mark_test(), which is to do_ecn_test() like do_drop_test() is to do_red_test(): meant to test that actions on the RED mark qevent block are offloaded, and executed on ECN-marked packets. The test splits install_qdisc() into its constituents, install_root_qdisc() and install_qdisc_tcX(). This is in order to test that when mirroring is enabled on one TC, the other TC does not mirror. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12selftests: mlxsw: sch_red_core: Drop two unused variablesPetr Machata1-2/+0
These variables are cut'n'pasted from other functions in the file and not actually used. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12mlxsw: spectrum_qdisc: Offload RED qevent markPetr Machata3-0/+14
The RED "mark" qevent can be offloaded under similar conditions as the RED "early_drop" qevent. Therefore recognize its binding type in the TC_SETUP_BLOCK handler and translate to the right SPAN trigger, with the right set of supported actions. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12mlxsw: spectrum_qdisc: Track permissible actions per bindingPetr Machata1-11/+33
One block can be bound to several qevents. The qevent type that the block is bound to determines which actions make sense in a given context. In the particular case of mlxsw, trap cannot be offloaded on a RED mark qevent, because the trap contract specifies that the packet is dropped in the HW datapath, and the HW trigger that the action is offloaded to is always forwarding the packet (in addition to marking in). Therefore keep track of which actions are permissible at each binding block. When an attempt is made to bind a certain action at a binding point where it is not supported, bounce the request. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12mlxsw: spectrum_qdisc: Distinguish between ingress and egress triggersPetr Machata3-8/+32
The following patches will configure the MLXSW_SP_SPAN_TRIGGER_ECN mirroring trigger. This trigger is considered "egress", unlike the previously-offloaded _EARLY_DROP. Add a helper to spectrum_span, mlxsw_sp_span_trigger_is_ingress(), to classify triggers to ingress and egress. Pass result of this instead of hardcoding true when calling mlxsw_sp_span_analyzed_port_get()/_put(). Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12mlxsw: spectrum_qdisc: Pass extack to mlxsw_sp_qevent_entry_configure()Petr Machata1-10/+19
This function will report a new failure in the following patches. Pass extack so that the failure is explicable. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12af_unix: Rename UNIX-DGRAM to UNIX to maintain backwards compatabilityStephen Boyd1-1/+1
Then name of this protocol changed in commit 94531cfcbe79 ("af_unix: Add unix_stream_proto for sockmap") because that commit added stream support to the af_unix protocol. Renaming the existing protocol makes a ChromeOS protocol test[1] fail now that the name has changed in /proc/net/protocols from "UNIX" to "UNIX-DGRAM". Let's put the name back to how it was while keeping the stream protocol as "UNIX-STREAM" so that the procfs interface doesn't change. This fixes the test and maintains backwards compatibility in proc. Cc: Jiang Wang <jiang.wang@bytedance.com> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Cong Wang <cong.wang@bytedance.com> Cc: Jakub Sitnicki <jakub@cloudflare.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Dmitry Osipenko <digetx@gmail.com> Link: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/tast-tests/src/chromiumos/tast/local/bundles/cros/network/supported_protocols.go;l=50;drc=e8b1c3f94cb40a054f4aa1ef1aff61e75dc38f18 [1] Fixes: 94531cfcbe79 ("af_unix: Add unix_stream_proto for sockmap") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12Merge tag 'linux-kselftest-kunit-fixes-5.15-rc6' of ↵Linus Torvalds9-9/+43
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kunit fixes from Shuah Khan: - Fixes to address the structleak plugin causing the stack frame size to grow immensely when used with KUnit. Fixes include adding a new makefile to disable structleak and using it from KUnit iio, device property, thunderbolt, and bitfield tests to disable it. - KUnit framework reference count leak in kfree_at_end - KUnit tool fix to resolve conflict between --json and --raw_output and generate correct test output in either case. - kernel-doc warnings due to mismatched arg names * tag 'linux-kselftest-kunit-fixes-5.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: fix kernel-doc warnings due to mismatched arg names bitfield: build kunit tests without structleak plugin thunderbolt: build kunit tests without structleak plugin device property: build kunit tests without structleak plugin iio/test-format: build kunit tests without structleak plugin gcc-plugins/structleak: add makefile var for disabling structleak kunit: fix reference count leak in kfree_at_end kunit: tool: better handling of quasi-bool args (--json, --raw_output)
2021-10-12Merge branch 'for-5.15-fixes' of ↵Linus Torvalds2-41/+43
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "All documentation / comment updates" * 'for-5.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroupv2, docs: fix misinformation in "device controller" section cgroup/cpuset: Change references of cpuset_mutex to cpuset_rwsem docs/cgroup: remove some duplicate words
2021-10-12Merge branch 'nfc-minor-printk-cleanup'Jakub Kicinski19-140/+21
Krzysztof Kozlowski says: ==================== nfc: minor printk cleanup v2: Correct SPDX license in patch 2/7 (as Joe pointed out). v1: Remove unused variable in pn533 (reported by kbuild). ==================== Link: https://lore.kernel.org/r/20211011133835.236347-1-krzysztof.kozlowski@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12nfc: microread: drop unneeded debug printsKrzysztof Kozlowski2-6/+0
ftrace is a preferred and standard way to debug entering and exiting functions so drop useless debug prints. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12nfc: trf7970a: drop unneeded debug printsKrzysztof Kozlowski1-8/+0
ftrace is a preferred and standard way to debug entering and exiting functions so drop useless debug prints. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12nfc: st21nfca: drop unneeded debug printsKrzysztof Kozlowski2-8/+0
ftrace is a preferred and standard way to debug entering and exiting functions so drop useless debug prints. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12nfc: st-nci: drop unneeded debug printsKrzysztof Kozlowski4-18/+0
ftrace is a preferred and standard way to debug entering and exiting functions so drop useless debug prints. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12nfc: s3fwrn5: simplify dereferencing pointer to struct deviceKrzysztof Kozlowski2-29/+18
Simplify the code dereferencing several pointers to reach the struct device. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12nfc: nci: replace GPLv2 boilerplate with SPDXKrzysztof Kozlowski1-14/+2
Replace standard GPLv2 license text with SPDX tag. Although the comment mentions GPLv2-only, it refers to the full license file which allows later GPL versions. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12nfc: drop unneeded debug printsKrzysztof Kozlowski7-57/+1
ftrace is a preferred and standard way to debug entering and exiting functions so drop useless debug prints. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-12Merge branch 'for-5.15-fixes' of ↵Linus Torvalds2-5/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fixes from Tejun Heo: "One patch to add a missing __printf annotation and the other to enable deferred printing for debug dumps to avoid deadlocks when triggered from some contexts (e.g. console drivers)" * 'for-5.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: fix state-dump console deadlock workqueue: annotate alloc_workqueue() as printf
2021-10-12Merge tag 'for-5.15-rc5-tag' of ↵Linus Torvalds5-52/+97
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few more error handling fixes, stemming from code inspection, error injection or fuzzing" * tag 'for-5.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix abort logic in btrfs_replace_file_extents btrfs: check for error when looking up inode during dir entry replay btrfs: unify lookup return value when dir entry is missing btrfs: deal with errors when adding inode reference during log replay btrfs: deal with errors when replaying dir entry during log replay btrfs: deal with errors when checking if a dir entry exists during log replay btrfs: update refs for any root except tree log roots btrfs: unlock newly allocated extent buffer after error
2021-10-12Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/nexDavid S. Miller17-29/+4266
t-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-10-11 Wojciech Drewek says: This series adds support for adding/removing advanced switch filters in ice driver. Advanced filters are building blocks for HW acceleration of TC orchestration. Add ndo_setup_tc callback implementation for PF and VF port representors (when device is configured in switchdev mode). Define dummy packet headers to allow adding advanced rules in HW. Supported headers, and thus filters, are: - MAC + IPv4 + UDP - MAC + VLAN + IPv4 + UDP - MAC + IPv4 + TCP - MAC + VLAN + IPv4 + TCP - MAC + IPv6 + UDP - MAC + VLAN + IPv6 + UDP - MAC + IPv6 + TCP - MAC + VLAN + IPv6 + TCP ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12Merge branch 'gve-improvements'David S. Miller7-103/+201
Jeroen de Borst says: ==================== gve: minor code and performance improvements This patchset contains a number of independent minor code and performance improvements. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12gve: Track RX buffer allocation failuresCatherine Sullivan1-1/+6
The rx_buf_alloc_fail counter wasn't getting updated. Fixes: 433e274b8f7b0 ("gve: Add stats for gve.") Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12gve: Allow pageflips on larger pagesJordan Kim1-1/+1
Half pages are just used for small enough packets. This change allows this to also apply for systems with pages larger than 4 KB. Fixes: 02b0e0c18ba75 ("gve: Rx Buffer Recycling") Signed-off-by: Jordan Kim <jrkim@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12gve: Add netif_set_xps_queue callCatherine Sullivan1-0/+4
Configure XPS when adding tx queues to the notification blocks. Fixes: dbdaa67540512 ("gve: Move some static functions to a common file") Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12gve: Recover from queue stall due to missed IRQJohn Fraker3-2/+51
Don't always reset the driver on a TX timeout. Attempt to recover by kicking the queue in case an IRQ was missed. Fixes: 9e5f7d26a4c08 ("gve: Add workqueue and reset support") Signed-off-by: John Fraker <jfraker@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12gve: Do lazy cleanup in TX pathTao Liu4-50/+62
When TX queue is full, attemt to process enough TX completions to avoid stalling the queue. Fixes: f5cedc84a30d2 ("gve: Add transmit and receive support") Signed-off-by: Tao Liu <xliutaox@google.com> Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12gve: Add rx buffer pagecnt biasCatherine Sullivan1-15/+37
Add a pagecnt bias field to rx buffer info struct to eliminate needing to increment the atomic page ref count on every pass in the rx hotpath. Also prefetch two packet pages ahead. Fixes: ede3fcf5ec67f ("gve: Add support for raw addressing to the rx path") Signed-off-by: Yanchun Fu <yangchun@google.com> Signed-off-by: Nathan Lewis <npl@google.com> Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-12gve: Switch to use napi_complete_doneYangchun Fu3-37/+43
Use napi_complete_done to allow for the use of gro_flush_timeout. Fixes: f5cedc84a30d2 ("gve: Add transmit and receive support") Signed-off-by: Yangchun Fu <yangchun@google.com> Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-11arm64/hugetlb: fix CMA gigantic page order for non-4K PAGE_SIZEMike Kravetz1-1/+1
For non-4K PAGE_SIZE configs, the largest gigantic huge page size is CONT_PMD_SHIFT order. On arm64 with 64K PAGE_SIZE, the gigantic page is 16G. Therefore, one should be able to specify 'hugetlb_cma=16G' on the kernel command line so that one gigantic page can be allocated from CMA. However, when adding such an option the following message is produced: hugetlb_cma: cma area should be at least 8796093022208 MiB This is because the calculation for non-4K gigantic page order is incorrect in the arm64 specific routine arm64_hugetlb_cma_reserve(). Fixes: abb7962adc80 ("arm64/hugetlb: Reserve CMA areas for gigantic pages on 16K and 64K configs") Cc: <stable@vger.kernel.org> # 5.9.x Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/20211005202529.213812-1-mike.kravetz@oracle.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-10-11workqueue: fix state-dump console deadlockJohan Hovold1-2/+16
Console drivers often queue work while holding locks also taken in their console write paths, something which can lead to deadlocks on SMP when dumping workqueue state (e.g. sysrq-t or on suspend failures). For serial console drivers this could look like: CPU0 CPU1 ---- ---- show_workqueue_state(); lock(&pool->lock); <IRQ> lock(&port->lock); schedule_work(); lock(&pool->lock); printk(); lock(console_owner); lock(&port->lock); where workqueues are, for example, used to push data to the line discipline, process break signals and handle modem-status changes. Line disciplines and serdev drivers can also queue work on write-wakeup notifications, etc. Reworking every console driver to avoid queuing work while holding locks also taken in their write paths would complicate drivers and is neither desirable or feasible. Instead use the deferred-printk mechanism to avoid printing while holding pool locks when dumping workqueue state. Note that there are a few WARN_ON() assertions in the workqueue code which could potentially also trigger a deadlock. Hopefully the ongoing printk rework will provide a general solution for this eventually. This was originally reported after a lockdep splat when executing sysrq-t with the imx serial driver. Fixes: 3494fc30846d ("workqueue: dump workqueues on sysrq-t") Cc: stable@vger.kernel.org # 4.0 Reported-by: Fabio Estevam <festevam@denx.de> Tested-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2021-10-11ALSA: pcm: Workaround for a wrong offset in SYNC_PTR compat ioctlTakashi Iwai1-1/+71
Michael Forney reported an incorrect padding type that was defined in the commit 80fe7430c708 ("ALSA: add new 32-bit layout for snd_pcm_mmap_status/control") for PCM control mmap data. His analysis is correct, and this caused the misplacements of PCM control data on 32bit arch and 32bit compat mode. The bug is that the __pad2 definition in __snd_pcm_mmap_control64 struct was wrongly with __pad_before_uframe, which should have been __pad_after_uframe instead. This struct is used in SYNC_PTR ioctl and control mmap. Basically this bug leads to two problems: - The offset of avail_min field becomes wrong, it's placed right after appl_ptr without padding on little-endian - When appl_ptr and avail_min are read as 64bit values in kernel side, the values become either zero or corrupted (mixed up) One good news is that, because both user-space and kernel misunderstand the wrong offset, at least, 32bit application running on 32bit kernel works as is. Also, 64bit applications are unaffected because the padding size is zero. The remaining problem is the 32bit compat mode; as mentioned in the above, avail_min is placed right after appl_ptr on little-endian archs, 64bit kernel reads bogus values for appl_ptr updates, which may lead to streaming bugs like jumping, XRUN or whatever unexpected. (However, we haven't heard any serious bug reports due to this over years, so practically seen, it's fairly safe to assume that the impact by this bug is limited.) Ideally speaking, we should correct the wrong mmap status control definition. But this would cause again incompatibility with the existing binaries, and fixing it (e.g. by renumbering ioctls) would be really messy. So, as of this patch, we only correct the behavior of 32bit compat mode and keep the rest as is. Namely, the SYNC_PTR ioctl is now handled differently in compat mode to read/write the 32bit values at the right offsets. The control mmap of 32bit apps on 64bit kernels has been already disabled (which is likely rather an overlook, but this worked fine at this time :), so covering SYNC_PTR ioctl should suffice as a fallback. Fixes: 80fe7430c708 ("ALSA: add new 32-bit layout for snd_pcm_mmap_status/control") Reported-by: Michael Forney <mforney@mforney.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: <stable@vger.kernel.org> Cc: Rich Felker <dalias@libc.org> Link: https://lore.kernel.org/r/29QBMJU8DE71E.2YZSH8IHT5HMH@mforney.org Link: https://lore.kernel.org/r/20211010075546.23220-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-11ice: ndo_setup_tc implementation for PRMichal Swiatkowski4-0/+74
Add tc-flower support for VF port representor devices. Implement ndo_setup_tc callback for TC HW offload on VF port representors devices. Implemented both methods: add and delete tc-flower flows. Mark NETIF_F_HW_TC bit in net device's feature set to enable offload TC infrastructure for port representor. Implement TC filters replay function required to restore filters settings while switchdev configuration is rebuilt. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-11ice: ndo_setup_tc implementation for PFKiran Patil5-1/+1044
Implement ndo_setup_tc net device callback for TC HW offload on PF device. ndo_setup_tc provides support for HW offloading various TC filters. Add support for configuring the following filter with tc-flower: - default L2 filters (src/dst mac addresses, ethertype, VLAN) - variations of L3, L3+L4, L2+L3+L4 filters using advanced filters (including ipv4 and ipv6 addresses). Allow for adding/removing TC flows when PF device is configured in eswitch switchdev mode. Two types of actions are supported at the moment: FLOW_ACTION_DROP and FLOW_ACTION_REDIRECT. Co-developed-by: Priyalee Kushwaha <priyalee.kushwaha@intel.com> Signed-off-by: Priyalee Kushwaha <priyalee.kushwaha@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-11ice: Allow changing lan_en and lb_en on all kinds of filtersMichal Swiatkowski1-0/+127
There is no way to change default lan_en and lb_en flags while adding new rule. Add function that allows changing these flags on rule determined by rule id and recipe id. Function checks if the rule is presented on regular rules list or advance rules list and call the appropriate function to update rule entry. As rules with ICE_SW_LKUP_DFLT recipe aren't tracked in a list, implement function which updates flags without searching for rules based only on rule id. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-11ice: cleanup rules infoVictor Raj2-10/+59
Change ICE_SW_LKUP_LAST to ICE_MAX_NUM_RECIPES as for now there also can be recipes other than the default. Free all structures created for advanced recipes in cleanup function. Write a function to clean allocated structures on advanced rule info. Signed-off-by: Victor Raj <victor.raj@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-11ice: allow deleting advanced rulesShivanshu Shukla2-0/+229
To remove advanced rule the same protocols list like in adding should be send to function. Based on this information list of advanced rules is searched to find the correct rule id. Remove advanced rule if it forwards to only one VSI. If it forwards to list of VSI remove only input VSI from this list. Introduce function to remove rule by id. It is used in case rule needs to be removed even if it forwards to the list of VSI. Allow removing all advanced rules from a particular VSI. It is useful in rebuilding VSI path. Co-developed-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Shivanshu Shukla <shivanshu.shukla@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-11ice: allow adding advanced rulesGrishma Kotecha4-1/+847
Define dummy packet headers to allow adding advanced rules in HW. This header is used as admin queue command parameter for adding a rule. The firmware will extract correct fields and will use them in look ups. Define each supported packets header and offsets to words used in recipe. Supported headers: - MAC + IPv4 + UDP - MAC + VLAN + IPv4 + UDP - MAC + IPv4 + TCP - MAC + VLAN + IPv4 + TCP - MAC + IPv6 + UDP - MAC + VLAN + IPv6 + UDP - MAC + IPv6 + TCP - MAC + VLAN + IPv6 + TCP Add code for creating an advanced rule. Rule needs to match defined dummy packet, if not return error, which means that this type of rule isn't currently supported. The first step in adding advanced rule is searching for an advanced recipe matching this kind of rule. If it doesn't exist new recipe is created. Dummy packet has to be filled with the correct header field value from the rule definition. It will be used to do look up in HW. Support searching for existing advance rule entry. It is used in case of adding the same rule on different VSI. In this case, instead of creating new rule, the existing one should be updated with refreshed VSI list. Add initialization for prof_res_bm_init flag to zero so that the possible resource for fv in the files can be initialized. Co-developed-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Grishma Kotecha <grishma.kotecha@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-11ice: create advanced switch recipeDan Nowlin5-22/+1412
These changes introduce code for creating advanced recipes for the switch in hardware. There are a couple of recipes already defined in the HW. They apply to matching on basic protocol headers, like MAC, VLAN, MACVLAN, ethertype or direction (promiscuous), etc.. If the user wants to match on other protocol headers (eg. ip address, src/dst port etc.) or different variation of already supported protocols, there is a need to create new, more complex recipe. That new recipe is referred as 'advanced recipe', and the filtering rule created on top of that recipe is called 'advanced rule'. One recipe can have up to 5 words, but the first word is always reserved for match on switch id, so the driver can define up to 4 words for one recipe. To support recipes with more words up to 5 recipes can be chained, so 20 words can be programmed for look up. Input for adding recipe function is a list of protocols to support. Based on this list correct profile is being chosen. Correct profile means that it contains all protocol types from a list. Each profile have up to 48 field vector words and each of this word have protocol id and offset. These two fields need to match with input data for adding recipe function. If the correct profile can't be found the function returns an error. The next step after finding the correct profile is grouping words into groups. One group can have up to 4 words. This is done to simplify sending recipes to HW (because recipe also can have up to 4 words). In case of chaining (so when look up consists of more than 4 words) last recipe will always have results from the previous recipes used as words. A recipe to profile map is used to store information about which profile is associate with this recipe. This map is an array of 64 elements (max number of recipes) and each element is a 256 bits bitmap (max number of profiles) Profile to recipe map is used to store information about which recipe is associate with this profile. This map is an array of 256 elements (max number of profiles) and each element is a 64 bits bitmap (max number of recipes) Signed-off-by: Dan Nowlin <dan.nowlin@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 09:56:04 +0300