summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-02-26drm/i915: Reduce the pointer dance of i915_is_ggtt()Chris Wilson7-54/+33
The multiple levels of indirect do nothing but hinder the compiler and the pointer chasing turns to be quite painful but painless to fix. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Dave Gordon <david.s.gordon@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456484600-11477-1-git-send-email-tvrtko.ursulin@linux.intel.com
2016-02-26drm/i915: Rename vma->*_list to *_link for consistencyChris Wilson10-53/+52
Elsewhere we have adopted the convention of using '_link' to denote elements in the list (and '_list' for the actual list_head itself), and that the name should indicate which list the link belongs to (and preferrably not just where the link is being stored). s/vma_link/obj_link/ (we iterate over obj->vma_list) s/mm_list/vm_link/ (we iterate over vm->[in]active_list) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-02-26drm/i915: Balance assert_rpm_wakelock_held() for !IS_ENABLED(CONFIG_PM)Chris Wilson1-14/+12
commit 09731280028ce03e6a27e1998137f1775a2839f3 Author: Imre Deak <imre.deak@intel.com> Date: Wed Feb 17 14:17:42 2016 +0200 drm/i915: Add helper to get a display power ref if it was already enabled left the rpm wakelock assertions unbalanced if CONFIG_PM was disabled as intel_runtime_pm_get_if_in_use() would return true without incrementing the local bookkeeping required for the assertions. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> CC: Mika Kuoppala <mika.kuoppala@intel.com> CC: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> CC: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456434628-22574-1-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Imre Deak <imre.deak@intel.com>
2016-02-26Merge branches 'pm-devfreq' and 'acpi-pci'Rafael J. Wysocki1-94/+34
* pm-devfreq: PM / devfreq: tegra: Set freq in rate callback * acpi-pci: Revert "ACPI, PCI, irq: remove interrupt count restriction" Revert "ACPI / PCI: Simplify acpi_penalize_isa_irq()"
2016-02-26KVM: x86: fix root cause for missed hardware breakpointsPaolo Bonzini1-5/+4
Commit 172b2386ed16 ("KVM: x86: fix missed hardware breakpoints", 2016-02-10) worked around a case where the debug registers are not loaded correctly on preemption and on the first entry to KVM_RUN. However, Xiao Guangrong pointed out that the root cause must be that KVM_DEBUGREG_BP_ENABLED is not being set correctly. This can indeed happen due to the lazy debug exit mechanism, which does not call kvm_update_dr7. Fix it by replacing the existing loop (more or less equivalent to kvm_update_dr0123) with calls to all the kvm_update_dr* functions. Cc: stable@vger.kernel.org # 4.1+ Fixes: 172b2386ed16a9143d9a456aae5ec87275c61489 Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-26drm/i915/lrc: Only set RS ctx enable in ctx control reg if there is a RSMichel Thierry1-1/+2
The driver should only set the "RS context enable" bit in the context image if we plan to use the resource streamer. Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456393738-35608-1-git-send-email-michel.thierry@intel.com
2016-02-26drm/i915/gen9: Set value of Indirect Context Offset based on gen versionMichel Thierry1-2/+24
The cache line offset for the Indirect CS context (0x21C8) varies from gen to gen. v2: Move it into a function (Arun), use MISSING_CASE (Chris) v3: Rebased (catched by ci bat) Cc: Arun Siluvery <arun.siluvery@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456223509-6454-1-git-send-email-michel.thierry@intel.com
2016-02-26fbcon: set a default value to blink intervalJean-Philippe Brucker1-0/+2
Since commit 27a4c827c34ac4256a190cc9d24607f953c1c459 fbcon: use the cursor blink interval provided by vt two attempts have been made at fixing a possible hang caused by cursor_timer_handler. That function registers a timer to be triggered at "jiffies + fbcon_ops.cur_blink_jiffies". A new case had been encountered during initialisation of clcd-pl11x: fbcon_fb_registered do_fbcon_takeover -> do_register_con_driver fbcon_startup (A) add_cursor_timer (with cur_blink_jiffies = 0) -> do_bind_con_driver visual_init fbcon_init (B) cur_blink_jiffies = msecs_to_jiffies(vc->vc_cur_blink_ms); If we take an softirq anywhere between A and B (and we do), cursor_timer_handler executes indefinitely. Instead of patching all possible paths that lead to this case one at a time, fix the issue at the source and initialise cur_blink_jiffies to 200ms when allocating fbcon_ops. This was its default value before aforesaid commit. fbcon_cursor or fbcon_init will refine this value downstream. Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Cc: <stable@vger.kernel.org> # v4.2 Tested-by: Scot Doyle <lkml14@scotdoyle.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-26ssb: host_soc depends on spromArnd Bergmann1-0/+1
Drivers that use the SSB sprom functionality typically 'select SSB_SPROM' from Kconfig, but CONFIG_SSB_HOST_SOC misses this, which results in a build failure unless at least one of the other drivers that selects it is enabled: drivers/built-in.o: In function `ssb_host_soc_get_invariants': (.text+0x459494): undefined reference to `ssb_fill_sprom_with_fallback' This adds the same select statement that is used elsewhere. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 541c9a84cd85 ("ssb: pick SoC invariants code from MIPS BCM47xx arch") Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-02-26Merge tag 'iwlwifi-for-kalle-2016-02-25' of ↵Kalle Valo4-1/+17
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes Two fixes for 4.5: * We forgot to free the paging memory (Matti) * Fix the frames in flight accounting (Liad)
2016-02-26drm/sti: add debugfs fps_show/fps_get mechanism for planesVincent Abriou6-7/+216
Display fps on demand for each used plane: cat /sys/kernel/debug/dri/0/fps_get Display fps in live in the console for each used plane: echo 255 > /sys/kernel/debug/dri/0/fps_show Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: add debugfs entries for TVOUT encodersVincent Abriou1-0/+157
Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: add debugfs entries for MIXER crtcVincent Abriou3-3/+149
Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: add debugfs entries for VID planeVincent Abriou3-5/+95
Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: add debugfs entries for HQVDP planeVincent Abriou1-0/+243
Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: add debugfs entries for GDP planesVincent Abriou1-0/+236
Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: add debugfs entries for CURSOR planeVincent Abriou1-0/+79
Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: add debugfs entries for HDA connectorVincent Abriou1-1/+104
Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: add debugfs entries for DVO connectorVincent Abriou1-0/+70
Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: add debugfs entries for HDMI connectorVincent Abriou2-4/+175
Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: add hdmi_mode property for HDMI connectorVincent Abriou2-2/+43
Configures the framer of the HDMI connection. By default starts in HDMI mode and can be swtich to DVI. Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: add colorspace property to the HDMI connectorVincent Abriou2-1/+79
Make the value of the colorspace of the HDMI infoframe configurable. HDMI colorspace could be: RGB, YUV422 or YUV444 Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: add HDMI vendor specific infoframeVincent Abriou1-9/+73
Vendor specific infoframe is mandatory for 4K2K resolution. Without this, the HDMI protocol compliance fails. Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: reset infoframe transmission when HDMI is stoppedVincent Abriou1-0/+43
Clear all infoframe registers when the HDMI link is stopped. Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: HDMI infoframe transmission mode not take into accountVincent Abriou1-1/+1
Set the infoframe transmission mode according to the type of the infoframe. Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: reset HD DACS when HDA connector is createdVincent Abriou1-0/+3
Make sure the HD DACS are disabled when the HDA connector is created. Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: fix dvo data_enable signalBich Hemon1-16/+35
Modify AWG algorithm in order to handle more than 1023 lines Signed-off-by: Bich Hemon <bich.hemon@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26drm/sti: adjust delay for DVOBich Hemon1-1/+4
Modify delay to display last pixel column on DVO Signed-off-by: Bich Hemon <bich.hemon@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26drm/sti: add missing encoder cleanup for DVO connectorVincent Abriou1-0/+4
Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: fix panel detection for DVO connectorVincent Abriou1-3/+5
The DVO connector is tag as disconnect because of a wrong management of the panel detection. Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: do not clip RGB/YUV component value at connector sideVincent Abriou1-8/+6
Disable the clipping mode for hdmi, dvo and hda connectors. Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: adapt YUV colorspace in display pipelineBich Hemon2-28/+64
Use BT601 for SD/ED resolution and BT709 for HD resolution Signed-off-by: Bich Hemon <bich.hemon@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26drm/sti: implement atomic_check for the planesVincent Abriou3-168/+270
Atomic update should never fail. Thus all checks must be done in the atomic_check function for each plane (gdp, hqvdp and cursor). Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: force cursor CLUT fetchFabien Dessenne1-7/+4
It may happen that the cursor is displayed with wrong colors which can be explained by a CLUT wrongly fetched at the first display. Fetching the CLUT at each commit (=move) ensures that the right colors are used, at least from the first cursor move. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26drm/sti: GDP cropping fails when we remove 2 pixels horizontallyVincent Abriou1-4/+5
GDP source width should be equal to the destination width to get rid of this issue. Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: fallback for GDP scalingBich Hemon1-5/+31
When a GDP gets a scale request (which it does not support), it accepts it but crops or clamps and outputs a warning message. Signed-off-by: Bich Hemon <bich.hemon@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26drm/sti: GDP planes only support RGB formatsBich Hemon1-17/+0
Only RGB formats supported by GDP planes Signed-off-by: Bich Hemon <bich.hemon@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26drm/sti: clarify the skip frame/field messageFabien Dessenne1-2/+2
When a frame or a field is skipped, output a Warning message instead of an Error message. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26drm/sti: awg_utils code cleanupBich Hemon1-21/+12
data_en is a local variable that doesn't need to be set as awg_generate_instr can be called directly with the requested value. Signed-off-by: Bich Hemon <bich.hemon@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26drm/sti: update VTG timing programmingVincent Abriou3-88/+173
This update eases to understand the VTG programming. It also sets a VTG output id for each supported connectors. Signed-off-by: Vincent Abriou <vincent.abriou@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2016-02-26drm/sti: set DRIVER_ATOMIC for stibenjamin.gaignard@linaro.org1-1/+1
sti now support of atomic modesetting so set the flag to enable it. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26drm/sti: fix cursor coordinatesbenjamin.gaignard@linaro.org1-1/+1
fix x/y typo while setting cursor coordinates Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26drm/sti: set CRTC modesetting parametersbenjamin.gaignard@linaro.org1-0/+1
Set CRTC modesetting parameters to avoid warnings in atomic mode. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26drm/sti: fix potential crash in gdpbenjamin.gaignard@linaro.org1-6/+7
In some cases last_close() could be called before sti_gdp_disable() and make kernel crash because mixer structure has been destroy. Let's gdp keep a reference on vtg to fix that (like it is already done in HQVDP) Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
2016-02-26Merge branch 'stable-4.5' of git://git.infradead.org/users/pcmoore/selinux ↵James Morris1-1/+1
into for-linus
2016-02-26ALSA: hda - Loop interrupt handling until really clearedTakashi Iwai3-23/+33
Currently the interrupt handler of HD-audio driver assumes that no irq update is needed while processing the irq. But in reality, it has been confirmed that the HW irq is issued even during the irq handling. Since we clear the irq status at the beginning, process the interrupt, then exits from the handler, the lately issued interrupt is left untouched without being properly processed. This patch changes the interrupt handler code to loop over the check-and-process. The handler tries repeatedly as long as the IRQ status are turned on, and either stream or CORB/RIRB is handled. For checking the stream handling, snd_hdac_bus_handle_stream_irq() returns a value indicating the stream indices bits. Other than that, the change is only in the irq handler itself. Reported-by: Libin Yang <libin.yang@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-26can: gs_usb: fixed disconnect bug by removing erroneous use of kfree()Maximilain Schneider1-13/+11
gs_destroy_candev() erroneously calls kfree() on a struct gs_can *, which is allocated through alloc_candev() and should instead be freed using free_candev() alone. The inappropriate use of kfree() causes the kernel to hang when gs_destroy_candev() is called. Only the struct gs_usb * which is allocated through kzalloc() should be freed using kfree() when the device is disconnected. Signed-off-by: Maximilian Schneider <max@schneidersoft.net> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-02-26drm/amdgpu: fix error handling in amdgpu_bo_list_setChristian König1-0/+3
Don't leak BOs in case of some error. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-26drm/amd/powerplay: fix code style warning.Rex Zhu1-2/+2
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2016-02-26Merge tag 'trace-fixes-v4.5-rc5-2' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Another small bug reported to me by Chunyu Hu. When perf added a "reg" function to the function tracing event (not a tracepoint), it caused that event to be displayed as a tracepoint and could cause errors in tracepoint handling. That was solved by adding a flag to ignore ftrace non-tracepoint events. But that flag was missed when displaying events in available_events, which should only contain tracepoint events. This broke a documented way to enable all events with: cat available_events > set_event As the function non-tracepoint event would cause that to error out. The commit here fixes that by having the available_events file not list events that have the ignore flag set" * tag 'trace-fixes-v4.5-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix showing function event in available_events
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 16:32:41 +0300