summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-11-07serial: imx: clean up imx_poll_put_char()Daniel Thompson1-19/+5
imx_put_poll_char() has been simplified to remove the code to disable interrupts. The present code can corrupt register state when re-entered from FIQ handler. Switch to _relaxed() MMIO functions (which are safe for polled I/O and needed to avoid taking spin locks). Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Huang Shijie <b32955@freescale.com> Cc: linux-serial@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07tty: serial: msm_serial: Use DT aliasesStephen Boyd1-4/+9
We rely on probe order of this driver to determine the line number for the uart port. This makes it impossible to know the line number when these devices are populated via DT. Use the DT alias mechanism to assign the line based on the aliases node. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07tty: serial: msm: Reset uartdm after baud rate changeStephen Boyd1-37/+12
We need to issue a reset if we ever change the value of the IPR register on DM hardware. If we don't reset the hardware the RX stale interrupt never triggers and the only way to trigger an RX handling event is by filling up the fifo. This causes things like getty to not work so well considering it might change the baud rate a few times. Fix this by moving the reset on startup and any reprogramming required after the reset to be after we change the baud rate. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07tty: serial: msm: Support sysrq on uartDM devicesStephen Boyd2-10/+33
To properly support sysrq on uartDM hardware we need to properly handle break characters. With the DM hardware the fifo can pack 4 characters at a time, where a break is indicated by an all zero byte. Unfortunately, we can't differentiate between an all zero byte for a break and an all zero byte of data, so try and do as best we can. First unmask the RX break start interrupt and record the interrupt when it arrives. Then while processing the fifo, detect the break by searching for an all zero character as long as we recently received an RX break start interrupt. This should make sysrq work fairly well. Cc: Frank Rowand <frank.rowand@sonymobile.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07tty: serial: msm: Fix sysrq spinlock recursion on non-DMStephen Boyd1-1/+5
The handle_rx() path calls uart_handle_sysrq_char() with the port lock held. This causes a spinlock recursion. Release and reacquire the lock here to avoid this. BUG: spinlock recursion on CPU#0, swapper/0 lock: msm_uart_ports+0x1e0/0x2d0, .magic: dead4ead, .owner: swapper/0, .owner_cpu: 0 CPU: 0 PID: 0 Comm: swapper Not tainted 3.17.0-rc7-00012-gb38ee8265941 #69 [<c0013964>] (unwind_backtrace) from [<c0011f74>] (show_stack+0x10/0x14) [<c0011f74>] (show_stack) from [<c004ed1c>] (do_raw_spin_lock+0x11c/0x13c) [<c004ed1c>] (do_raw_spin_lock) from [<c02d44c0>] (msm_console_write+0x78/0x188) [<c02d44c0>] (msm_console_write) from [<c0052880>] (call_console_drivers.constprop.22+0xb4/0x144) [<c0052880>] (call_console_drivers.constprop.22) from [<c0053570>] (console_unlock+0x27c/0x4ac) [<c0053570>] (console_unlock) from [<c0053bb4>] (vprintk_emit+0x1f4/0x5a8) [<c0053bb4>] (vprintk_emit) from [<c04ad0ac>] (printk+0x30/0x40) [<c04ad0ac>] (printk) from [<c02c2990>] (__handle_sysrq+0x58/0x1b8) [<c02c2990>] (__handle_sysrq) from [<c02d41b0>] (msm_irq+0x694/0x6f8) [<c02d41b0>] (msm_irq) from [<c0055740>] (handle_irq_event_percpu+0x58/0x270) [<c0055740>] (handle_irq_event_percpu) from [<c0055994>] (handle_irq_event+0x3c/0x5c) [<c0055994>] (handle_irq_event) from [<c0057e84>] (handle_level_irq+0x9c/0x138) [<c0057e84>] (handle_level_irq) from [<c005509c>] (generic_handle_irq+0x24/0x38) [<c005509c>] (generic_handle_irq) from [<c000f730>] (handle_IRQ+0x44/0xb0) [<c000f730>] (handle_IRQ) from [<c0008518>] (msm_vic_handle_irq+0x44/0x64) [<c0008518>] (msm_vic_handle_irq) from [<c04b5ac4>] (__irq_svc+0x44/0x7c) Exception stack(0xc0719f68 to 0xc0719fb0) 9f60: 00000001 00000001 00000000 c0722938 c0718000 c0769acc 9f80: 00000000 c0720098 c0769305 4117b362 c0769acc 00000000 01000000 c0719fb0 9fa0: c004cab0 c000f880 20000013 ffffffff [<c04b5ac4>] (__irq_svc) from [<c000f880>] (arch_cpu_idle+0x20/0x30) [<c000f880>] (arch_cpu_idle) from [<c004691c>] (cpu_startup_entry+0xf4/0x23c) [<c004691c>] (cpu_startup_entry) from [<c06d8b70>] (start_kernel+0x32c/0x394) Cc: Frank Rowand <frank.rowand@sonymobile.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07serial: mxs-auart: enable PPS supportJanusz Uzycki1-0/+11
Enables PPS support in mxs-auart serial driver to make PPS API working. Signed-off-by: Janusz Uzycki <j.uzycki@elproma.com.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07serial: mxs-auart: add interrupts for modem control linesJanusz Uzycki1-2/+172
Handle CTS/DSR/RI/DCD GPIO interrupts in mxs-auart. Signed-off-by: Janusz Uzycki <j.uzycki@elproma.com.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07serial: mxs-auart: use mctrl_gpio helpers for handling modem signalsJanusz Uzycki3-6/+55
Dedicated CTS and RTS pins are unusable together with a lot of other peripherals because they share the same line. Pinctrl is limited. Moreover, the AUART controller doesn't handle DTR/DSR/DCD/RI signals, so we have to control them via GPIO. This patch permits to use GPIOs to control the CTS/RTS/DTR/DSR/DCD/RI signals. Signed-off-by: Janusz Uzycki <j.uzycki@elproma.com.pl> Reviewed-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07serial: mxs-auart: clean get_mctrl and set_mctrlJanusz Uzycki1-13/+1
Russell King: The only thing which the .get_mctrl method is supposed to do is to return the state of the /input/ lines, which are CTS, DCD, DSR, RI. The output line state is stored in port->mctrl, and is added to the returned value by serial_core when it's required. RTS output state should not be returned from the .get_mctrl method. This patch removes ctrl variable from mxs_auart_port and removes useless reading back RTS line. The ctrl variable in mxs_auart_port duplicated mctrl, member of uart_port structure in serial_core.h. The removed code from mxs_auart_set_mctrl() and mxs_auart_get_mctrl duplicated uart_update_mctrl() and uart_tiocmget() in serial_core.c. Signed-off-by: Janusz Uzycki <j.uzycki@elproma.com.pl> Reviewed-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07tty/serial: at91: fix rx ring buffer managementCyrille Pitchen1-39/+55
This patch swaps the use "tail" and "head" to fit the semantic of the linux circular buffer documentation: - head: the point at which the producer (the DMA controller) inserts items. - tail: the point at which the consumer (the serial framework) finds the next item. Besides the former code of the rx ring buffer didn't manage the case where head < tail, which might lead to loss of data. To fix this bug the data are now sent from the DMA buffer to the serial framework in two steps: 1 - First, we test if head < tail. If so, we copy the data from tail to the end of the DMA buffer then reset tail to zero. 2 - Finally, we copy data from tail to head then set tail to head. In addition, since tty_insert_flip_string() may now be called twice, atmel_flip_buffer_rx_dma() becomes less efficient than moving the calls dma_sync_sg_for_cpu(), dma_sync_sg_for_device(), tty_insert_flip_string() and tty_flip_buffer_push() directly into atmel_rx_from_dma(). Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07serial: of_serial: add "ralink,rt2880-uart" to the binding documentationJohn Crispin1-0/+1
Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07serial: ralink: adds Mediatek MT7620 serialJohn Crispin1-1/+1
Add the config symbol for Mediatek MT7620 SoC to the SERIAL_8250_RT288X dependencies. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07serial: of: add a PORT_RT2880 definitionJohn Crispin3-3/+15
The Ralink RT2880 SoC and its successors have an internal 8250 core. This core needs the same quirks applied as the AMD AU1xxx uart. In addition to these quirks, the ports memory region is only 0x100 unlike the AU1xxx which has a size of 0x1000. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07tty: serial: omap: Increase max consoles and add check to prevent crashNishanth Menon1-1/+8
Increase the maximum number of consoles possible to 10 since DRA7 now has the maximum number of consoles possible. without doing this, for example, enabling DRA7 UART10 results in internal data structures and console cannot match up and we endup with a crash as follows: [ 1.903503] omap_uart 48424000.serial: [UART-1]: failure [serial_omap_probe]: -22 [ 1.911437] omap_uart: probe of 48424000.serial failed with error -22 [ 1.920379] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 1.928894] pgd = c0004000 [ 1.931732] [00000004] *pgd=00000000 [ 1.935485] Internal error: Oops: 5 [#1] SMP ARM [ 1.940338] Modules linked in: [ 1.943542] CPU: 1 PID: 12 Comm: kworker/1:0 Tainted: G W 3.18.0-rc1-00001-g8821bc4-dirty #6 [ 1.953521] task: ed8a2d00 ti: ed8a4000 task.ti: ed8a4000 [ 1.959197] PC is at process_one_work+0x38/0x4a4 [ 1.964050] LR is at 0x0 [ 1.966705] pc : [<c00548e0>] lr : [<00000000>] psr: 40000093 [ 1.966705] sp : ed8a5ea8 ip : ed8a5ec8 fp : eeb9abc0 [ 1.978759] r10: ed8a4000 r9 : 00000008 r8 : ed842458 [ 1.984252] r7 : 00000000 r6 : eeb9abc0 r5 : ed842440 r4 : edbf26a8 [ 1.991119] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : 00000000 [ 1.997985] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 2.005767] Control: 10c5387d Table: 8000406a DAC: 00000015 [ 2.011810] Process kworker/1:0 (pid: 12, stack limit = 0xed8a4248) [ 2.018371] Stack: (0xed8a5ea8 to 0xed8a6000) [ 2.022949] 5ea0: 00000001 00000000 60000093 c008346c 00000001 ed8a5ec8 [ 2.031555] 5ec0: c0054de4 eeb9abc0 ed8a4000 ed842458 00000008 ed8a4000 eeb9abc0 ed842440 [ 2.040161] 5ee0: eeb9abc0 eeb9abf0 ed8a4000 ed842458 00000008 ed8a4000 eeb9abc0 c0054ec4 [ 2.048767] 5f00: ed8a4000 eeb9ac4c a0000053 00000000 ed845bc0 ed842440 c0054d80 00000000 [ 2.057342] 5f20: 00000000 00000000 00000000 c005999c 00000001 00000000 c05eaa64 ed842440 [ 2.065948] 5f40: 00000000 00000000 dead4ead ffffffff ffffffff c097c680 00000000 00000000 [ 2.074554] 5f60: c078acd4 ed8a5f64 ed8a5f64 00000000 00000000 dead4ead ffffffff ffffffff [ 2.083160] 5f80: c097c680 00000000 00000000 c078acd4 ed8a5f90 ed8a5f90 600000d3 ed845bc0 [ 2.091766] 5fa0: c00598d4 00000000 00000000 c000e668 00000000 00000000 00000000 00000000 [ 2.100341] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.108947] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 90005148 11010482 [ 2.117553] [<c00548e0>] (process_one_work) from [<c0054ec4>] (worker_thread+0x144/0x498) [ 2.126159] [<c0054ec4>] (worker_thread) from [<c005999c>] (kthread+0xc8/0xe4) [ 2.133758] [<c005999c>] (kthread) from [<c000e668>] (ret_from_fork+0x14/0x2c) [ 2.141357] Code: e1a04001 e1a05000 e893000f e31e0004 (e5978004) [ 2.147766] ---[ end trace 5798e2803311b69f ]--- <snip> The final solution is to transition off to use 8250 driver and no dependency on console structures and move away from omap-serial driver, hence no major cleanups are done for this driver, so add a simple check to prevent future crashes in a similar manner in case of platform with additional ports. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07xfs: track bulkstat progress by aginoDave Chinner1-37/+34
The bulkstat main loop progress is tracked by the "lastino" variable, which is a full 64 bit inode. However, the loop actually works on agno/agino pairs, and so there's a significant disconnect between the rest of the loop and the main cursor. Convert this to use the agino, and pass the agino into the chunk formatting function and convert it too. This gets rid of the inconsistency in the loop processing, and finally makes it simple for us to skip inodes at any point in the loop simply by incrementing the agino cursor. cc: <stable@vger.kernel.org> # 3.17 Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-11-07xfs: bulkstat error handling is brokenDave Chinner1-10/+19
The error propagation is a horror - xfs_bulkstat() returns a rval variable which is only set if there are formatter errors. Any sort of btree walk error or corruption will cause the bulkstat walk to terminate but will not pass an error back to userspace. Worse is the fact that formatter errors will also be ignored if any inodes were correctly formatted into the user buffer. Hence bulkstat can fail badly yet still report success to userspace. This causes significant issues with xfsdump not dumping everything in the filesystem yet reporting success. It's not until a restore fails that there is any indication that the dump was bad and tha bulkstat failed. This patch now triggers xfsdump to fail with bulkstat errors rather than silently missing files in the dump. This now causes bulkstat to fail when the lastino cookie does not fall inside an existing inode chunk. The pre-3.17 code tolerated that error by allowing the code to move to the next inode chunk as the agino target is guaranteed to fall into the next btree record. With the fixes up to this point in the series, xfsdump now passes on the troublesome filesystem image that exposes all these bugs. cc: <stable@vger.kernel.org> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2014-11-07xfs: bulkstat main loop logic is a messDave Chinner1-32/+24
There are a bunch of variables tha tare more wildy scoped than they need to be, obfuscated user buffer checks and tortured "next inode" tracking. This all needs cleaning up to expose the real issues that need fixing. cc: <stable@vger.kernel.org> # 3.17 Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-11-07xfs: bulkstat chunk-formatter has issuesDave Chinner1-34/+24
The loop construct has issues: - clustidx is completely unused, so remove it. - the loop tries to be smart by terminating when the "freecount" tells it that all inodes are free. Just drop it as in most cases we have to scan all inodes in the chunk anyway. - move the "user buffer left" condition check to the only point where we consume space int eh user buffer. - move the initialisation of agino out of the loop, leaving just a simple loop control logic using the clusteridx. Also, double handling of the user buffer variables leads to problems tracking the current state - use the cursor variables directly rather than keeping local copies and then having to update the cursor before returning. cc: <stable@vger.kernel.org> # 3.17 Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-11-07xfs: bulkstat chunk formatting cursor is brokenDave Chinner2-47/+28
The xfs_bulkstat_agichunk formatting cursor takes buffer values from the main loop and passes them via the structure to the chunk formatter, and the writes the changed values back into the main loop local variables. Unfortunately, this complex dance is full of corner cases that aren't handled correctly. The biggest problem is that it is double handling the information in both the main loop and the chunk formatting function, leading to inconsistent updates and endless loops where progress is not made. To fix this, push the struct xfs_bulkstat_agichunk outwards to be the primary holder of user buffer information. this removes the double handling in the main loop. Also, pass the last inode processed by the chunk formatter as a separate parameter as it purely an output variable and is not related to the user buffer consumption cursor. Finally, the chunk formatting code is not shared by anyone, so make it local to xfs_itable.c. cc: <stable@vger.kernel.org> # 3.17 Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-11-07xfs: bulkstat btree walk doesn't terminateDave Chinner1-9/+10
The bulkstat code has several different ways of detecting the end of an AG when doing a walk. They are not consistently detected, and the code that checks for the end of AG conditions is not consistently coded. Hence the are conditions where the walk code can get stuck in an endless loop making no progress and not triggering any termination conditions. Convert all the "tmp/i" status return codes from btree operations to a common name (stat) and apply end-of-ag detection to these operations consistently. cc: <stable@vger.kernel.org> # 3.17 Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-11-07mm: Fix comment before truncate_setsize()Jan Kara1-2/+3
XFS doesn't always hold i_mutex when calling truncate_setsize() and it uses a different lock to serialize truncates and writes. So fix the comment before truncate_setsize(). Reported-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-11-06USB: cdc-acm: add quirk for control-line state requestsJohan Hovold2-2/+14
Add new quirk for devices that cannot handle control-line state requests. Note that we currently send these requests to all devices, regardless of whether they claim to support it, but that errors are only logged if support is claimed. Since commit 0943d8ead30e ("USB: cdc-acm: use tty-port dtr_rts"), which only changed the timings for these requests slightly, this has been reported to cause occasional firmware crashes on Simtec Electronics Entropy Key devices after re-enumeration. Enable the quirk for this device. Reported-by: Nix <nix@esperi.org.uk> Tested-by: Nix <nix@esperi.org.uk> Cc: stable <stable@vger.kernel.org> # v3.16 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06Merge tag 'fixes-for-v3.18-rc4' of ↵Greg Kroah-Hartman1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v3.18-rc4 A single fix this for dwc2 this time. Because of excessive debugging messages, dwc2 would sometimes fail enumeration. The fix is simple, just converting a dev_info() into dev_dbg(). Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-06tty: Fix pty master poll() after slave closes v2Francesco Ruggeri1-2/+7
Commit f95499c3030f ("n_tty: Don't wait for buffer work in read() loop") introduces a race window where a pty master can be signalled that the pty slave was closed before all the data that the slave wrote is delivered. Commit f8747d4a466a ("tty: Fix pty master read() after slave closes") fixed the problem in case of n_tty_read, but the problem still exists for n_tty_poll. This can be seen by running 'for ((i=0; i<100;i++));do ./test.py ;done' where test.py is: import os, select, pty (pid, pty_fd) = pty.fork() if pid == 0: os.write(1, 'This string should be received by parent') else: poller = select.epoll() poller.register( pty_fd, select.EPOLLIN ) ready = poller.poll( 1 * 1000 ) for fd, events in ready: if not events & select.EPOLLIN: print 'missed POLLIN event' else: print os.read(fd, 100) poller.close() The string from the slave is missed several times. This patch takes the same approach as the fix for read and special cases this condition for poll. Tested on 3.16. Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06Merge tag 'usb-serial-3.18-rc4' of ↵Greg Kroah-Hartman2-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v3.18-rc4 Two fixes of non-atomic allocations in write paths. Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-06Merge tag 'pci-v3.18-fixes-2' of ↵Linus Torvalds1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "This fixes an oops when enabling SR-IOV VF devices. The oops is a regression I added by configuring all devices during enumeration. - Don't oops on virtual buses in acpi_pci_get_bridge_handle() (Yinghai Lu)" * tag 'pci-v3.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Don't oops on virtual buses in acpi_pci_get_bridge_handle()
2014-11-06Merge tag 'sound-3.18-rc4' of ↵Linus Torvalds2-36/+95
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This update contains mostly only fixes for Realtek HD-audio codec driver in addition to a long-standing sysfs warning bug fix for USB-audio. One significant fix for Realtek codecs is the update of EAPD init codes. This avoids invalid COEF setups for some codec models and may fix "lost sound" in some cases. The rest are a bit high volume but only new quirks and ALC668-specific COEF tables" * tag 'sound-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Restore default value for ALC668 ALSA: usb-audio: Fix device_del() sysfs warnings at disconnect ALSA: hda - fix mute led problem for three HP laptops ALSA: hda/realtek - Update Initial AMP for EAPD control ALSA: hda - change three SSID quirks to one pin quirk ALSA: hda - Set GPIO 4 low for a few HP machines ALSA: hda - Add ultra dock support for Thinkpad X240.
2014-11-06Merge tag 'mmc-v3.18-2' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds1-13/+8
Pull MMC fix from Ulf Hansson: "Fix card detection regression in the MMC core. The MMC_CAP2_CD_ACTIVE_HIGH and MMC_CAP2_RO_ACTIVE_HIGH could under some circumstances be set incorrectly, causing the card detection to fail" * tag 'mmc-v3.18-2' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: core: fix card detection regression
2014-11-06Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull another filesystem fix from Al Viro: "A fix for embarrassing braino in o2net_send_tcp_msg(). -stable fodder..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix breakage in o2net_send_tcp_msg()
2014-11-06serial: pl011: Fix build breakage with !CONFIG_DMA_ENGINEPeter Hurley1-1/+2
Commit 479e9b94fdce7bc4 ("serial: Refactor uart_flush_buffer() from uart_close") refactored the uart_flush_buffer() in uart_close() into those drivers that define a flush_buffer() method. However, in the amba-pl011 driver configured without CONFIG_DMA_ENGINE, flush_buffer() is a NULL method, so the direct call fails to compile. Check and call the flush_buffer() method through the ops table instead. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06MIPS: R3000: Fix debug output for Virtual page numberIsamu Mogi1-2/+2
Virtual page number of R3000 in entryhi is 20 bit from MSB. But in dump_tlb(), the bit mask to read it from entryhi is 19 bit (0xffffe000). The patch fixes that to 0xfffff000. Signed-off-by: Isamu Mogi <isamu@leafytree.jp> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8290/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-06Merge remote-tracking branches 'spi/fix/fsl-dspi' and 'spi/fix/pxa2xx' into ↵Mark Brown2-4/+7
spi-linus
2014-11-06spi: pxa2xx: toggle clocks on suspend if not disabled by runtime PMDmitry Eremin-Solenikov1-2/+5
If PM_RUNTIME is enabled, it is easy to trigger the following backtrace on pxa2xx hosts: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at /home/lumag/linux/arch/arm/mach-pxa/clock.c:35 clk_disable+0xa0/0xa8() Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 3.17.0-00007-g1b3d2ee-dirty #104 [<c000de68>] (unwind_backtrace) from [<c000c078>] (show_stack+0x10/0x14) [<c000c078>] (show_stack) from [<c001d75c>] (warn_slowpath_common+0x6c/0x8c) [<c001d75c>] (warn_slowpath_common) from [<c001d818>] (warn_slowpath_null+0x1c/0x24) [<c001d818>] (warn_slowpath_null) from [<c0015e80>] (clk_disable+0xa0/0xa8) [<c0015e80>] (clk_disable) from [<c02507f8>] (pxa2xx_spi_suspend+0x2c/0x34) [<c02507f8>] (pxa2xx_spi_suspend) from [<c0200360>] (platform_pm_suspend+0x2c/0x54) [<c0200360>] (platform_pm_suspend) from [<c0207fec>] (dpm_run_callback.isra.14+0x2c/0x74) [<c0207fec>] (dpm_run_callback.isra.14) from [<c0209254>] (__device_suspend+0x120/0x2f8) [<c0209254>] (__device_suspend) from [<c0209a94>] (dpm_suspend+0x50/0x208) [<c0209a94>] (dpm_suspend) from [<c00455ac>] (suspend_devices_and_enter+0x8c/0x3a0) [<c00455ac>] (suspend_devices_and_enter) from [<c0045ad4>] (pm_suspend+0x214/0x2a8) [<c0045ad4>] (pm_suspend) from [<c04b5c34>] (test_suspend+0x14c/0x1dc) [<c04b5c34>] (test_suspend) from [<c000880c>] (do_one_initcall+0x8c/0x1fc) [<c000880c>] (do_one_initcall) from [<c04aecfc>] (kernel_init_freeable+0xf4/0x1b4) [<c04aecfc>] (kernel_init_freeable) from [<c0378078>] (kernel_init+0x8/0xec) [<c0378078>] (kernel_init) from [<c0009590>] (ret_from_fork+0x14/0x24) ---[ end trace 46524156d8faa4f6 ]--- This happens because suspend function tries to disable a clock that is already disabled by runtime_suspend callback. Add if (!pm_runtime_suspended()) checks to suspend/resume path. Fixes: 7d94a505858 (spi/pxa2xx: add support for runtime PM) Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Reported-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-11-06tty:vt remove obsolete struct initializerPeng Fan1-6/+10
This patch fixes sparse warning: "obsolete struct initializer, use C99 syntax" Signed-off-by: Peng Fan <van.freenix@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06serial: 8250_em: Remove out-of-memory messagePeter Hurley1-3/+1
devm_kzalloc() already warns if allocation fails; remove duplicate message. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06vt: Remove vt_get_kmsg_redirect() from uapi headerPeter Hurley2-3/+2
vt_get_kmsg_redirect() only has meaning to the console driver as an alias for calling vt_kmsg_redirect(). Move the macro definition to the only source file which uses it; remove from uapi/linux/vt.h Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06tty: Document defunct ASYNC_SPLIT_TERMIOS flag in uapi headerPeter Hurley1-1/+1
The last vestige of ASYNC_SPLIT_TERMIOS was removed by commit 'cris: Remove obsolete ASYNC_SPLIT_TERMIOS behavior'. Mark the flag as defunct in the uapi header. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06cris: Remove obsolete ASYNC_SPLIT_TERMIOS behaviorPeter Hurley2-13/+0
ASYNC_SPLIT_TERMIOS behavior is a remnant of the long-dead /dev/cuaXX callout device. Split termios handling was removed tree-wide in v2.5.71 by: commit 99a21edebbfd8c29e39ee7fcc8a1ffa423657290 Author: Alexander Viro <viro@www.linux.org.uk> Date: Wed Jun 11 07:41:28 2003 -0700 [PATCH] tty_driver refcounting killed the last remnants of callout stuff - we don't need to mess with storing termios privately anymore. which pre-dated the re-introduction into the cris serial driver in v2.6.7 by: commit 311a5ffeda8ccb3f1f3840069f37234e043092d4 Author: Andrew Morton <akpm@osdl.org> Date: Mon May 31 18:52:29 2004 -0700 [PATCH] CRIS architecture update From: "Mikael Starvik" <mikael.starvik@axis.com> - Lots of fixes from 2.4. - Updated for 2.6.6. - Added IDE driver Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06serial: hp300: Remove obsolete commentsPeter Hurley1-4/+0
setup_serial_console() is obsolete and has been superseded by early_serial_setup() which is called at the end of the function. The IA64 arch does not call this function; only the m68k arch setup calls this function. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06tty: Remove defunct serial_console_init() declarationPeter Hurley1-4/+0
serial_console_init() is not defined by the tty core; remove declaration. Note that the powerpc arch boot code contains a serial_console_init() declaration in arch/powerpc/boot/ops.h which is restricted to the powerpc arch boot. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06tty: Remove defunct pcxe_open() declarationPeter Hurley1-4/+0
pcxe_open() has no definition in mainline; remove declaration. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06tty: Call methods in modern stylePeter Hurley2-8/+8
The use of older function ptr calling style, (*fn)(), makes static analysis more error-prone; replace with modern fn() style. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06tty: Replace open-coded test with tty_hung_up_p()Peter Hurley1-1/+1
tty_hung_up_p() is equivalent to the open-coded test in tty_open(). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06serial: of-serial: fix uninitialized kmalloc variableJingchang Lu1-1/+1
The info pointer points to an uninitialized kmalloced space. If a device doesn't have clk property, then info->clk may have unpredicated value and cause call trace. So use kzalloc to make sure it is NULL initialized. Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Acked-by: Arnd Bergmann <arnd@arndb.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06tty/vt: don't set font mappings on vc not supporting thisImre Deak1-0/+7
We can call this function for a dummy console that doesn't support setting the font mapping, which will result in a null ptr BUG. So check for this case and return error for consoles w/o font mapping support. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=59321 Signed-off-by: Imre Deak <imre.deak@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06tty: serial: 8250_mtk: Fix quot calculationMatthias Brugger1-1/+1
The calculation of value quot for highspeed register set to three was wrong. This patch fixes the calculation so that the serial port for baudrates bigger then 576000 baud is working correctly. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06tty: ipwireless: Fix probable mask then right shift defectsJoe Perches1-6/+6
Precedence of & and >> is not the same and is not left to right. shift has higher precedence and should be done after the mask. Add parentheses around the masks. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: David Sterba <dsterba@suse.cz> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06serial: imx: Remove unneeded registration messageFabio Estevam1-4/+1
There is no real value in displaying "Serial: IMX driver" in every boot. The uart_register_driver() can fail and even so the "Serial: IMX driver" will be displayed, which is not really helpful. This is particularly annoying when booting multi_v7_defconfig kernel on a SoC that is not a i.MX and even though this message gets displayed. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06serial: imx: Remove unneeded OOM error messageFabio Estevam1-1/+0
When kzalloc() fails the core MM will already complain about it, so there is no need to have the error message locally. Remove the unneeded error message. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-06serial: imx: Remove unneeded goto labelFabio Estevam1-5/+2
Instead of jumping to 'error_out1' label we can simplify the code and return the error code directly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 01:51:45 +0300