summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-10-20powerpc/smp: do not decrement idle task preempt count in CPU offlineNathan Lynch1-2/+0
With PREEMPT_COUNT=y, when a CPU is offlined and then onlined again, we get: BUG: scheduling while atomic: swapper/1/0/0x00000000 no locks held by swapper/1/0. CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.15.0-rc2+ #100 Call Trace: dump_stack_lvl+0xac/0x108 __schedule_bug+0xac/0xe0 __schedule+0xcf8/0x10d0 schedule_idle+0x3c/0x70 do_idle+0x2d8/0x4a0 cpu_startup_entry+0x38/0x40 start_secondary+0x2ec/0x3a0 start_secondary_prolog+0x10/0x14 This is because powerpc's arch_cpu_idle_dead() decrements the idle task's preempt count, for reasons explained in commit a7c2bb8279d2 ("powerpc: Re-enable preemption before cpu_die()"), specifically "start_secondary() expects a preempt_count() of 0." However, since commit 2c669ef6979c ("powerpc/preempt: Don't touch the idle task's preempt_count during hotplug") and commit f1a0a376ca0c ("sched/core: Initialize the idle task with preemption disabled"), that justification no longer holds. The idle task isn't supposed to re-enable preemption, so remove the vestigial preempt_enable() from the CPU offline path. Tested with pseries and powernv in qemu, and pseries on PowerVM. Fixes: 2c669ef6979c ("powerpc/preempt: Don't touch the idle task's preempt_count during hotplug") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211015173902.2278118-1-nathanl@linux.ibm.com
2021-10-20powerpc/idle: Don't corrupt back chain when going idleMichael Ellerman1-4/+6
In isa206_idle_insn_mayloss() we store various registers into the stack red zone, which is allowed. However inside the IDLE_STATE_ENTER_SEQ_NORET macro we save r2 again, to 0(r1), which corrupts the stack back chain. We used to do the same in isa206_idle_insn_mayloss() itself, but we fixed that in 73287caa9210 ("powerpc64/idle: Fix SP offsets when saving GPRs"), however we missed that the macro also corrupts the back chain. Corrupting the back chain is bad for debuggability but doesn't necessarily cause a bug. However we recently changed the stack handling in some KVM code, and it now relies on the stack back chain being valid when it returns. The corruption causes that code to return with r1 pointing somewhere in kernel data, at some point LR is restored from the stack and we branch to NULL or somewhere else invalid. Only affects Power8 hosts running KVM guests, with dynamic_mt_modes enabled (which it is by default). The fixes tag below points to the commit that changed the KVM stack handling, exposing this bug. The actual corruption of the back chain has always existed since 948cf67c4726 ("powerpc: Add NAP mode support on Power7 in HV mode"). Fixes: 9b4416c5095c ("KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest()") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211020094826.3222052-1-mpe@ellerman.id.au
2021-10-20vrf: Revert "Reset skb conntrack connection..."Eugene Crosser1-4/+0
This reverts commit 09e856d54bda5f288ef8437a90ab2b9b3eab83d1. When an interface is enslaved in a VRF, prerouting conntrack hook is called twice: once in the context of the original input interface, and once in the context of the VRF interface. If no special precausions are taken, this leads to creation of two conntrack entries instead of one, and breaks SNAT. Commit above was intended to avoid creation of extra conntrack entries when input interface is enslaved in a VRF. It did so by resetting conntrack related data associated with the skb when it enters VRF context. However it breaks netfilter operation. Imagine a use case when conntrack zone must be assigned based on the original input interface, rather than VRF interface (that would make original interfaces indistinguishable). One could create netfilter rules similar to these: chain rawprerouting { type filter hook prerouting priority raw; iif realiface1 ct zone set 1 return iif realiface2 ct zone set 2 return } This works before the mentioned commit, but not after: zone assignment is "forgotten", and any subsequent NAT or filtering that is dependent on the conntrack zone does not work. Here is a reproducer script that demonstrates the difference in behaviour. ========== #!/bin/sh # This script demonstrates unexpected change of nftables behaviour # caused by commit 09e856d54bda5f28 ""vrf: Reset skb conntrack # connection on VRF rcv" # https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=09e856d54bda5f288ef8437a90ab2b9b3eab83d1 # # Before the commit, it was possible to assign conntrack zone to a # packet (or mark it for `notracking`) in the prerouting chanin, raw # priority, based on the `iif` (interface from which the packet # arrived). # After the change, # if the interface is enslaved in a VRF, such # assignment is lost. Instead, assignment based on the `iif` matching # the VRF master interface is honored. Thus it is impossible to # distinguish packets based on the original interface. # # This script demonstrates this change of behaviour: conntrack zone 1 # or 2 is assigned depending on the match with the original interface # or the vrf master interface. It can be observed that conntrack entry # appears in different zone in the kernel versions before and after # the commit. IPIN=172.30.30.1 IPOUT=172.30.30.2 PFXL=30 ip li sh vein >/dev/null 2>&1 && ip li del vein ip li sh tvrf >/dev/null 2>&1 && ip li del tvrf nft list table testct >/dev/null 2>&1 && nft delete table testct ip li add vein type veth peer veout ip li add tvrf type vrf table 9876 ip li set veout master tvrf ip li set vein up ip li set veout up ip li set tvrf up /sbin/sysctl -w net.ipv4.conf.veout.accept_local=1 /sbin/sysctl -w net.ipv4.conf.veout.rp_filter=0 ip addr add $IPIN/$PFXL dev vein ip addr add $IPOUT/$PFXL dev veout nft -f - <<__END__ table testct { chain rawpre { type filter hook prerouting priority raw; iif { veout, tvrf } meta nftrace set 1 iif veout ct zone set 1 return iif tvrf ct zone set 2 return notrack } chain rawout { type filter hook output priority raw; notrack } } __END__ uname -rv conntrack -F ping -W 1 -c 1 -I vein $IPOUT conntrack -L Signed-off-by: Eugene Crosser <crosser@average.org> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20drm/i915/selftests: remove duplicate include in mock_region.cRan Jianping1-2/+0
'drm/ttm/ttm_placement.h' included in 'drivers/gpu/drm/i915/selftests/mock_region.c' is duplicated. It is also included on the 9 line. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Ran Jianping <ran.jianping@zte.com.cn> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211019090205.1003458-1-ran.jianping@zte.com.cn
2021-10-20ksmbd: add buffer validation in session setupMarios Makassikis2-27/+40
Make sure the security buffer's length/offset are valid with regards to the packet length. Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-10-20ksmbd: throttle session setup failures to avoid dictionary attacksNamjae Jeon6-6/+31
To avoid dictionary attacks (repeated session setups rapidly sent) to connect to server, ksmbd make a delay of a 5 seconds on session setup failure to make it harder to send enough random connection requests to break into a server if a user insert the wrong password 10 times in a row. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-10-20ksmbd: validate OutputBufferLength of QUERY_DIR, QUERY_INFO, IOCTL requestsHyunchul Lee1-16/+52
Validate OutputBufferLength of QUERY_DIR, QUERY_INFO, IOCTL requests and check the free size of response buffer for these requests. Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2021-10-20io-wq: max_worker fixesPavel Begunkov1-2/+5
First, fix nr_workers checks against max_workers, with max_worker registration, it may pretty easily happen that nr_workers > max_workers. Also, synchronise writing to acct->max_worker with wqe->lock. It's not an actual problem, but as we don't care about io_wqe_create_worker(), it's better than WRITE_ONCE()/READ_ONCE(). Fixes: 2e480058ddc2 ("io-wq: provide a way to limit max number of workers") Reported-by: Beld Zhang <beldzhang@gmail.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/11f90e6b49410b7d1a88f5d04fb8d95bb86b8cf3.1634671835.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-20net: dsa: Fix an error handling path in 'dsa_switch_parse_ports_of()'Christophe JAILLET1-2/+7
If we return before the end of the 'for_each_child_of_node()' iterator, the reference taken on 'port' must be released. Add the missing 'of_node_put()' calls. Fixes: 83c0afaec7b7 ("net: dsa: Add new binding implementation") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/15d5310d1d55ad51c1af80775865306d92432e03.1634587046.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-20drm/amdgpu/discovery: parse hw_id_name for SDMA instance 2 and 3Guchun Chen1-0/+2
Otherwise, hw_id_name string is NULL for SDMA 2 and 3 when dumping ip version from VBIOS. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amdgpu: output warning for unsupported ras error inject (v2)Tao Zhou2-1/+10
Output a warning message if RAS TA returns UNSUPPORTED_ERROR_INJ status. v2: implement it in psp_ras_ta_check_status function. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amdgpu: centralize checking for RAS TA statusTao Zhou1-4/+20
Create new function to check status returned by RAS TA. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20Revert "drm/amd/display: Add helper for blanking all dp displays"Agustin Gutierrez6-59/+130
This reverts commit 1445d967fb915156aed0e79ca80c239cb2d414ce. This patch introduced a couple of dmesg warnings, this is not a valid approach anymore. For this reason, we are reverting this patch, and we need to revert the workaround patch. v2: squash in unused variable removal (Alex) Cc: Hanghong Ma <hanghong.ma@amd.com> Cc: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20Revert "drm/amd/display: Fix error in dmesg at boot"Agustin Gutierrez1-2/+2
This reverts commit 4874ecf5fd1de008756a76796bf255d3b19715c1. Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: [FW Promotion] Release 0.0.88Anthony Koo1-2/+2
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: Add bios parser support for latest firmware_infoNevenko Stupar1-1/+89
[Why] V3_4 is latest in use. [How] Add bios parser support for firmware_info_v3_4 along with some relevant fields it is also retrieving from dce_info and smu_info. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: 3.2.157Aric Cyr1-1/+1
This DC patchset brings improvements in multiple areas. In summary, we highlight: * Fix some issues such as DP2 problem, prefetch bandwidth calculation for DCN3.1 and others. * Increased Z9 latency and removed z10 save after dsc disable. * Revert a couple of bad changes. * Added missing PSR state patch. Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: Change initializer to single braceAnthony Koo5-26/+25
Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: Disable hdmistream and hdmichar clocksJake Wang4-6/+22
[Why & How] Disable hdmistream and hdmichar root clocks when not being used. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: Moved dccg init to after bios golden initJake Wang1-4/+3
[Why] bios_golden_init will override dccg_init during init_hw. [How] Move dccg_init to after bios_golden_init. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: Removed z10 save after dsc disableJake Wang1-4/+0
[Why & How] Z10 save is done during PSR and bootup. DSC disable does not need to save for Z10. Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: Disable dpstreamclk, symclk32_se, and symclk32_leJake Wang3-11/+130
[Why & How] Disable dpstreamclk, symclk32_se, and symclk32_le when not in use. Reviewed-by: Ariel Bernstein <eric.yang2@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: Increase watermark latencies for DCN3.1Nikola Cornij1-8/+8
[why] The original latencies were causing underflow in some modes [how] Replace with the up-to-date watermark values based on new measurments Reviewed-by: Ahmad Othman <ahmad.othman@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: increase Z9 latency to workaround underflow in Z9Eric Yang1-2/+2
[Why] Z9 latency is higher than when we originally tuned the watermark parameters, causing underflow. Increasing the value until the latency issues is resolved. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: Require immediate flip support for DCN3.1 planesNicholas Kazlauskas1-0/+7
[Why] Immediate flip can be enabled dynamically and has higher BW requirements when validating which voltage mode to use. If we validate when it's not set then potentially DCFCLK will be too low and we will underflow. [How] DM always requires support so always require it as part of DML input parameters. This can't be enabled unconditionally on older ASIC because it blocks some expected modes so only target DCN3.1 for now. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: Disable dsc root clock when not being usedJake Wang5-3/+129
[Why & How] Disable root clock for dsc when not being used. Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: Add missing PSR stateMikita Lipski2-0/+3
[why] PSR_STATE2b was introduced on DMCUB side, but not on the driver side, which caused convert_psr_state helper function to return PSR_STATE_INVALID. That caused visual lagging during state transition. [how] Add PSR_STATE2b to dc_psr_state and convert_psr_state Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: Fix prefetch bandwidth calculation for DCN3.1Nicholas Kazlauskas1-3/+3
[Why] Prefetch BW calculated is lower than the DML reference because of a porting error that's excluding cursor and row bandwidth from the pixel data bandwidth. [How] Change the dml_max4 to dml_max3 and include cursor and row bandwidth in the same calculation as the rest of the pixel data during vactive. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: Fix DP2 SE and LE SYMCLK selection for B0 PHYHansen1-0/+17
Remap phyd32clk to PHYF and PHYG for B0, PHYC and PHYD are unused Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Hansen <Hansen.Dsouza@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: Limit display scaling to up to true 4k for DCN 3.1Nikola Cornij1-1/+1
[why] The requirement is that image width up to 4096 shall be supported Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: Removed power down on boot from DCN31Lai, Derek1-43/+0
[Why] Error message on Linux when booting. [How] Removed power down on boot from DCN31 HW init to match DCN10 HW init. Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Derek Lai <derek.lai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: Validate plane rects before useAric Cyr1-0/+5
[Why] Calculation of scaling ratio can result in a crash due to zero'd src or dst plane rects. [How] Validate that src and dst rects are valid before using for scaling calculations. Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: correct apg audio channel enable golden valueWenjing Liu1-1/+1
Hardware team has recommended to generically hard code this register to 0xFF as part of the effort to eventually remove this control. However we set it to 0xF instead. This causes 4 of audio 8ch to be muted. Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: do not compare integers of different widthsJosip Pavic1-2/+2
[Why & How] Increase width of some variables to avoid comparing integers of different widths Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: Clean Up VPG Low Mem PowerMichael Strauss3-14/+13
[WHAT] One of the current VPG power on calls is unnecessary Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: add DP2.0 debug option to set MST_EN for SST streamWenjing Liu2-1/+7
[why] Some DP2.0 RX requires us to set MST_EN even for SST configuration. We added this debug option so we can configure this temporary workaround for the RX. Reviewed-by: George Shen <george.shen@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: Do not skip link training on DP quick hot plugJimmy Kizito3-5/+8
[Why] When rapidly plugging and unplugging a DP sink, detection link training can be mistakenly skipped. This is due to the hotplug processing occurring before the encoder assignment logic has had a chance to process the removal of a stream. The encoder that would be used for detection link training is then erroneously reported as already in use and detection link training is skipped. [How] During hot plug processing, only determine a link encoder to be unavailable for a particular link if it has been assigned to a different link. Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: Clear encoder assignment for copied streamsJimmy Kizito1-0/+4
[Why] When copying a stream, the encoder assigned to it is copied too. Encoder assignment should only happen when executing the encoder assignment function link_encs_assign(). [How] Clear the link encoder pointer for copied stream. Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: Disable dpp root clock when not being usedJake Wang2-2/+44
[Why & How] Disable root clock for dpp when not being used. Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/display: Fully switch to dmub for all dcn21 asicsRoman Li1-2/+1
[Why] On renoir usb-c port stops functioning on resume after f/w update. New dmub firmware caused regression due to conflict with dmcu. With new dmub f/w dmcu is superseded and should be disabled. [How] - Disable dmcu for all dcn21. Check dmesg for dmub f/w version. The old firmware (before regression): [drm] DMUB hardware initialized: version=0x00000001 All other versions require this patch for renoir. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1735 Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amd/amdgpu: Do irq_fini_hw after ip_fini_earlyYuBiao Wang1-2/+2
[Why] drm_irq_uninstall is called in irq_fini_hw so that irq is disabled in sw stage. SMU (and maybe other IP blocks) fini_hw will call irq_put for cleanup and the whole cleanup process will be skipped because of drm->irq_enable = false. [How] Move ip_fini_early before irq_fini_hw. Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amdkfd: map gpu hive id to xgmi connected cpuJonathan Kim1-1/+18
ROCr needs to be able to identify all devices that have direct access to fine grain memory, which should include CPUs that are connected to GPUs over xGMI. The GPU hive ID can be mapped onto the CPU hive ID since the CPU is part of the hive. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amdgpu: load PSP RL in resume pathTao Zhou1-0/+6
Some registers' access will fail without PSP RL after resume. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-20drm/amdkfd: Fix an inappropriate error handling in allloc memory of gpuLang Yu1-1/+1
We should unreference a gem object instead of an amdgpu bo here. Fixes: fd9a9f8801de ("drm/amdgpu: Use GEM obj reference for KFD BOs") Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-19ACPI: PM: Do not turn off power resources in unknown stateRafael J. Wysocki1-6/+1
Commit 6381195ad7d0 ("ACPI: power: Rework turning off unused power resources") caused power resources in unknown state with reference counters equal to zero to be turned off too, but that caused issues to appear in the field, so modify the code to only turn off power resources that are known to be "on". Link: https://lore.kernel.org/linux-acpi/6faf4b92-78d5-47a4-63df-cc2bab7769d0@molgen.mpg.de/ Fixes: 6381195ad7d0 ("ACPI: power: Rework turning off unused power resources") Reported-by: Andreas K. Huettel <andreas.huettel@ur.de> Tested-by: Andreas K. Huettel <andreas.huettel@ur.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 5.14+ <stable@vger.kernel.org> # 5.14+
2021-10-19ucounts: Proper error handling in set_cred_ucountsEric W. Biederman1-2/+3
Instead of leaking the ucounts in new if alloc_ucounts fails, store the result of alloc_ucounts into a temporary variable, which is later assigned to new->ucounts. Cc: stable@vger.kernel.org Fixes: 905ae01c4ae2 ("Add a reference to ucounts for each cred") Link: https://lkml.kernel.org/r/87pms2s0v8.fsf_-_@disp2133 Tested-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Alexey Gladkov <legion@kernel.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-10-19ucounts: Pair inc_rlimit_ucounts with dec_rlimit_ucoutns in commit_credsEric W. Biederman1-1/+1
The purpose of inc_rlimit_ucounts and dec_rlimit_ucounts in commit_creds is to change which rlimit counter is used to track a process when the credentials changes. Use the same test for both to guarantee the tracking is correct. Cc: stable@vger.kernel.org Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts") Link: https://lkml.kernel.org/r/87v91us0w4.fsf_-_@disp2133 Tested-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Alexey Gladkov <legion@kernel.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-10-19sched/scs: Reset the shadow stack when idle_task_exitWoody Lin1-0/+1
Commit f1a0a376ca0c ("sched/core: Initialize the idle task with preemption disabled") removed the init_idle() call from idle_thread_get(). This was the sole call-path on hotplug that resets the Shadow Call Stack (scs) Stack Pointer (sp). Not resetting the scs-sp leads to scs overflow after enough hotplug cycles. Therefore add an explicit scs_task_reset() to the hotplug code to make sure the scs-sp does get reset on hotplug. Fixes: f1a0a376ca0c ("sched/core: Initialize the idle task with preemption disabled") Signed-off-by: Woody Lin <woodylin@google.com> [peterz: Changelog] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Link: https://lore.kernel.org/r/20211012083521.973587-1-woodylin@google.com
2021-10-19Merge branch 'akpm' (patches from Andrew)Linus Torvalds17-99/+138
Merge misc fixes from Andrew Morton: "19 patches. Subsystems affected by this patch series: mm (userfaultfd, migration, memblock, mempolicy, slub, secretmem, and thp), ocfs2, binfmt, vfs, and misc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mailmap: add Andrej Shadura mm/thp: decrease nr_thps in file's mapping on THP split mm/secretmem: fix NULL page->mapping dereference in page_is_secretmem() vfs: check fd has read access in kernel_read_file_from_fd() elfcore: correct reference to CONFIG_UML mm, slub: fix incorrect memcg slab count for bulk free mm, slub: fix potential use-after-free in slab_debugfs_fops mm, slub: fix potential memoryleak in kmem_cache_open() mm, slub: fix mismatch between reconstructed freelist depth and cnt mm, slub: fix two bugs in slab_debug_trace_open() mm/mempolicy: do not allow illegal MPOL_F_NUMA_BALANCING | MPOL_LOCAL in mbind() memblock: check memory total_size ocfs2: mount fails with buffer overflow in strlen ocfs2: fix data corruption after conversion from inline format mm/migrate: fix CPUHP state to update node demotion order mm/migrate: add CPU hotplug to demotion #ifdef mm/migrate: optimize hotplug-time demotion order updates userfaultfd: fix a race between writeprotect and exit_mmap() mm/userfaultfd: selftests: fix memory corruption with thp enabled
2021-10-19Merge tag 'linux-can-fixes-for-5.15-20211019' of ↵David S. Miller1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2021-10-19 this is a pull request of a single patch for net/master. The patch is by me and fixes the error handling in case of a FC timeout in the TX path of the ISOTOP CAN protocol. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 08:23:31 +0300