summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-12-13drm/amd/display: fix HW block PG sequenceCharlene Liu4-44/+105
[why] Power up and power down has reverted programming order. also make sure disable root clock last. Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amd/display: Force p-state disallow if leaving no plane configAlvin Lee1-0/+20
[Description] - When we're in a no plane config, DCN is always asserting P-State allow - This creates a scenario where the P-State blackout can start just as VUPDATE takes place and transitions the DCN config to a one where one or more HUBP's are active which can result in underflow - To fix this issue, force p-state disallow and unforce after the transition from no planes case -> one or more planes active Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amd/display: For prefetch mode > 0, extend prefetch if possibleAlvin Lee3-6/+31
[Description] For mode programming we want to extend the prefetch as much as possible (up to oto, or as long as we can for equ) if we're not already applying the 60us prefetch requirement. This is to avoid intermittent underflow issues during prefetch. The prefetch extension is applied under the following scenarios: 1. We're in prefetch mode 1 (i.e. we don't support MCLK switch in blank) 2. We're using subvp or drr methods of p-state switch, in which case we we don't care if prefetch takes up more of the blanking time Mode programming typically chooses the smallest prefetch time possible (i.e. highest bandwidth during prefetch) presumably to create margin between p-states / c-states that happen in vblank and prefetch. Therefore we only apply this prefetch extension when p-state in vblank is not required (UCLK p-states take up the most vblank time). Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amd/display: Exit from idle state before accessing HW dataSung Joon Kim1-0/+4
[why & how] User interface cannot guarantee system is in idle state, so need to ensure we exit idle state before accessing any HW data. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Sung Joon Kim <sungkim@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amd/display: Disable OPTC pg to match DC Hubp/dpp pgAllen1-0/+1
[Why] To match the hardware sequence Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Allen <allen.pan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amd/display: Populate dtbclk from bounding boxFangzhi Zuo2-7/+12
dtbclk is unavaliable from pmfw. Try to grab the value from bounding box Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amd/display: Revert DP2 MST hub triple display fixMichael Strauss1-7/+0
[WHY] Introduces regression with DP2 native displays [HOW] Revert the change Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amd/display: trivial comment changeAurabindo Pillai1-1/+1
FP guard is valid for all recent asics, not just RV, so fix the comment. Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amd/display: Revert "Fix conversions between bytes and KB"Taimur Hassan1-8/+8
[Why & How] HostVMMinPageSize is expected to be in KB according to spec, the checks later down the line reflect this as well. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Taimur Hassan <syed.hassan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amd/display: allow DP40 cables to do UHBR13.5Ran Shi1-4/+10
why: With DP2.1a expansion we are allowing DP40 cables to do UHBR13.5 how: Assume UHBR10 means UHBR13.5 also for unknown cable type and passive cable type. Reviewed-by: George Shen <george.shen@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Ran Shi <ran.shi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amd/display: Use explicit size for types in DCCG's struct dp_dto_paramsAurabindo Pillai1-2/+2
Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amd/display: Remove minor revision 5 until proper parser is readyJoshua Aberback1-2/+0
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amd/pm: Remove redundant function members of pptable_funcsMa Jun7-35/+20
Remove redundant functions members of pptable_funcs and change the function type as static because they are not called by other files. Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amdgpu/jpeg: configure doorbell for each playbackSaleemkhan Jamadar1-7/+8
Doorbell is configured during start of each playback. v1 - add comment for the doorbell programming change Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amdgpu: Use the right method to get IP versionLijo Lazar5-9/+11
Replace direct usage of adev->ip_versions with amdgpu_ip_version. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amd/display: add driver-specific property for plane degamma LUTMelissa Wen5-0/+138
Hook up driver-specific atomic operations for managing AMD color properties. Create AMD driver-specific color management properties and attach them according to HW capabilities defined by `struct dc_color_caps`. First add plane degamma LUT properties that means user-blob and its size. We will add more plane color properties in the next patches. In addition, we define AMD_PRIVATE_COLOR to guard these driver-specific plane properties. Plane degamma can be used to linearize input space for arithmetical operations that are more accurate when applied in linear color. v2: - update degamma LUT prop description - move private color operations from amdgpu_display to amdgpu_dm_color v5: - get degamma blob correctly (Joshua) Reviewed-by: Harry Wentland <harry.wentland@amd.com> Co-developed-by: Joshua Ashton <joshua@froggi.es> Signed-off-by: Joshua Ashton <joshua@froggi.es> Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/drm_plane: track color mgmt changes per planeMelissa Wen3-0/+9
We will add color mgmt properties to DRM planes in the next patches and we want to track when one of this properties change to define atomic commit behaviors. Using a similar approach from CRTC color props, we set a color_mgmt_changed boolean whenever a plane color prop changes. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/drm_property: make replace_property_blob_from_id a DRM helperMelissa Wen4-48/+71
Place it in drm_property where drm_property_replace_blob and drm_property_lookup_blob live. Then we can use the DRM helper for driver-specific KMS properties too. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/drm_mode_object: increase max objects to accommodate new color propsMelissa Wen1-1/+1
DRM_OBJECT_MAX_PROPERTY limits the number of properties to be attached and we are increasing that value all time we add a new property (generic or driver-specific). In this series, we are adding 13 new KMS driver-specific properties for AMD color manage: - CRTC Gamma enumerated Transfer Function - Plane: Degamma LUT+size+TF, HDR multiplier, shaper LUT+size+TF, 3D LUT+size, blend LUT+size+TF (12) Therefore, just increase DRM_OBJECT_MAX_PROPERTY to a number (64) that accomodates these new properties and gives some room for others, avoiding change this number everytime we add a new KMS property. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Simon Ser <contact@emersion.fr> Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amd/display: Fix spelling mistake "SMC_MSG_AllowZstatesEntr" -> ↵Colin Ian King1-4/+4
"SMC_MSG_AllowZstatesEntry" There is a spelling mistake in a smu_print message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13drm/amdgpu: fix buffer funcs setting order on suspend harderAlex Deucher1-2/+0
Part of commit c03581986234 ("drm/amdgpu: fix buffer funcs setting order on suspend") got dropped accidently. Add it back. Fixes: c03581986234 ("drm/amdgpu: fix buffer funcs setting order on suspend") Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-12-13Merge tag 'amd-drm-next-6.8-2023-12-08' of ↵Dave Airlie83-424/+2112
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.8-2023-12-08: amdgpu: - SR-IOV fixes - DCN 3.5 updates - Backlight fixes - MST fixes - DMCUB fixes - DPIA fixes - Display powergating updates - Enable writeback connectors - Misc code cleanups - Add more register state debugging for aquavanjaram - Suspend fix - Clockgating fixes - SMU 14 updates - PSR fixes - MES logging updates - Misc fixes amdkfd: - SVM fix radeon: - Fix potential memory leaks in error paths Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231208205613.4861-1-alexander.deucher@amd.com
2023-12-13Merge tag 'drm-intel-gt-next-2023-12-08' of ↵Dave Airlie77-635/+1232
git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - drm/i915: Implement fdinfo memory stats printing Use the newly added drm_print_memory_stats helper to show memory utilisation of our objects in drm/driver specific fdinfo output. To collect the stats we walk the per memory regions object lists and accumulate object size into the respective drm_memory_stats categories. Cross-subsystem Changes: - Backmerge of drm-next (to bring drm-intel-next for PXP changes) Driver Changes: - Wa_18028616096 now applies to all DG2 (Matt R) - Drop Wa_22014600077 on all DG2 (Matt R) - Add new ATS-M device ID (Haridhar) - More Meteorlake (MTL) workarounds (Matt R, Dnyaneshwar, Jonathan, Gustavo, Radhakrishna) - PMU WARN_ON cleanup on driver unbind (Umesh) - Limit GGTT WC flushing workaround to pre BXT/ICL platforms - Complement implementation for Wa_16018031267 / Wa_16018063123 (Andrzej, Jonathan, Nirmoy, Chris) - Properly print internal GSC engine in trace logs (Tvrtko) - Track gt pm wakerefs (Andrzej) - Fix null deref bugs on perf code when perf is disabled (Harshit, Tvrtko) - Fix __i915_request_create memory leak on driver unbind (Andrzej) - Remove spurious unsupported HuC message on MTL (Daniele) - Read a shadowed mmio register for ggtt flush (Vinay) - Add missing new-line to GT_TRACE (Andrzej) - Add drm_dbgs for critical PXP events (Alan) - Skip pxp init if gt is wedged (Zhanjun) - Replace custom intel runtime_pm tracker with ref_tracker library (Andrzej) - Compiler warning/static checker/coding style cleanups (Arnd, Nirmoy, Soumya, Gilbert, Dorcas, Kunwu, Sam, Tvrtko) - Code structure and helper cleanups (Jani, Tvrtko, Andi) - Selftest improvements (John, Tvrtko, Andrzej) Signed-off-by: Dave Airlie <airlied@redhat.com> # Conflicts: # drivers/gpu/drm/i915/gt/intel_gt_mcr.c From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZXNBcsSwJEVsq9On@jlahtine-mobl.ger.corp.intel.com
2023-12-13Merge tag 'exynos-drm-next-for-v6.8' of ↵Dave Airlie15-56/+40
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next One bug fix - Add a missing call to drm_atomic_helper_shutdown() in Exynos DRM driver. This function is necessary during system shutdown and when the driver is unbound. Without this function, components like panels may not shut down properly, potentially leading to power issue as mentioned in the kernel documentation, specially in the "driver instance overview" secstion of 'drm_drv.c'. Two cleanups - Convert '.remove()' callback function in the Exynos DRM platform driver to a version that returns void instead of an integer. - Change connector type of exynos_drm_dpi.c module to DPI. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231212051134.48524-1-inki.dae@samsung.com
2023-12-12drm/exynos: dpi: Change connector type to DPIPaul Cercueil1-1/+1
When exynos_drm_dpi.c was written, DRM_MODE_CONNECTOR_DPI did not exist yet and I guess that's the reason why DRM_MODE_CONNECTOR_VGA was used as the connector type. However, now it makes more sense to use DRM_MODE_CONNECTOR_DPI as the connector type. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2023-12-12drm/exynos: Convert to platform remove callback returning voidUwe Kleine-König14-55/+28
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> fix merge conflict and drop duplicated patch description. Signed-off-by: Inki Dae <inki.dae@samsung.com>
2023-12-12drm/exynos: Call drm_atomic_helper_shutdown() at shutdown/unbind timeDouglas Anderson1-0/+11
Based on grepping through the source code this driver appears to be missing a call to drm_atomic_helper_shutdown() at system shutdown time and at driver unbind time. Among other things, this means that if a panel is in use that it won't be cleanly powered off at system shutdown time. The fact that we should call drm_atomic_helper_shutdown() in the case of OS shutdown/restart and at driver remove (or unbind) time comes straight out of the kernel doc "driver instance overview" in drm_drv.c. A few notes about this fix: - When adding drm_atomic_helper_shutdown() to the unbind path, I added it after drm_kms_helper_poll_fini() since that's when other drivers seemed to have it. - Technically with a previous patch, ("drm/atomic-helper: drm_atomic_helper_shutdown(NULL) should be a noop"), we don't actually need to check to see if our "drm" pointer is NULL before calling drm_atomic_helper_shutdown(). We'll leave the "if" test in, though, so that this patch can land without any dependencies. It could potentially be removed later. - This patch also makes sure to set the drvdata to NULL in the case of bind errors to make sure that shutdown can't access freed data. Suggested-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2023-12-12Merge tag 'exynos-drm-next-for-v6.7-rc5' of ↵Inki Dae268-1370/+3181
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into exynos-drm-next Two fixups - Fix a potential error pointer dereference by checking the return value of exynos_drm_crtc_get_by_type() function before accessing to crtc object. - Fix a wrong error checking in exynos_drm_dma.c modules, which was reported by Dan[1] [1] https://lore.kernel.org/all/33e52277-1349-472b-a55b-ab5c3462bfcf@moroto.mountain/
2023-12-12Backmerge tag 'v6.7-rc5' into drm-nextDave Airlie629-3421/+6958
Linux 6.7-rc5 Alex requested this for some amdkfd work relying on the symbols exports. Signed-off-by: Dave Airlie <airlied@redhat.com>
2023-12-11platform/x86/amd: Add support for AMD ACPI based Wifi band RFI mitigation ↵Ma Jun4-0/+423
feature Due to electrical and mechanical constraints in certain platform designs there may be likely interference of relatively high-powered harmonics of the (G-)DDR memory clocks with local radio module frequency bands used by Wifi 6/6e/7. To mitigate this, AMD has introduced a mechanism that devices can use to notify active use of particular frequencies so that other devices can make relative internal adjustments as necessary to avoid this resonance. Co-developed-by: Evan Quan <quanliangl@hotmail.com> Signed-off-by: Evan Quan <quanliangl@hotmail.com> Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-12-11Documentation/driver-api: Add document about WBRF mechanismMa Jun2-0/+79
Add documentation about AMD's Wifi band RFI mitigation (WBRF) mechanism explaining the theory and how it is used. Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-12-11Linux 6.7-rc5Linus Torvalds1-1/+1
2023-12-10Merge tag 'sched_urgent_for_v6.7_rc5' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Borislav Petkov: - Make sure tasks are thawed exactly and only once to avoid their state getting corrupted * tag 'sched_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: freezer,sched: Do not restore saved_state of a thawed task
2023-12-10Merge tag 'perf_urgent_for_v6.7_rc5' of ↵Linus Torvalds1-23/+38
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf event fix from Borislav Petkov: - Make sure perf event size validation is done on every event in the group * tag 'perf_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix perf_event_validate_size()
2023-12-10Merge tag 'x86_urgent_for_v6.7_rc5' of ↵Linus Torvalds2-4/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Add a forgotten CPU vendor check in the AMD microcode post-loading callback so that the callback runs only on AMD - Make sure SEV-ES protocol negotiation happens only once and on the BSP * tag 'x86_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/CPU/AMD: Check vendor in the AMD microcode callback x86/sev: Fix kernel crash due to late update to read-only ghcb_version
2023-12-10Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds9-23/+27
Pull kvm fixes from Paolo Bonzini: "Generic: - Set .owner for various KVM file_operations so that files refcount the KVM module until KVM is done executing _all_ code, including the last few instructions of kvm_put_kvm(). And then revert the misguided attempt to rely on "struct kvm" refcounts to pin KVM-the-module. ARM: - Do not redo the mapping of vLPIs, if they have already been mapped s390: - Do not leave bits behind in PTEs - Properly catch page invalidations that affect the prefix of a nested guest x86: - When checking if a _running_ vCPU is "in-kernel", i.e. running at CPL0, get the CPL directly instead of relying on preempted_in_kernel (which is valid if and only if the vCPU was preempted, i.e. NOT running). - Fix a benign "return void" that was recently introduced. Selftests: - Makefile tweak for dependency generation - '-Wformat' fix" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: Update EFER software model on CR0 trap for SEV-ES KVM: selftests: add -MP to CFLAGS KVM: selftests: Actually print out magic token in NX hugepages skip message KVM: x86: Remove 'return void' expression for 'void function' Revert "KVM: Prevent module exit until all VMs are freed" KVM: Set file_operations.owner appropriately for all such structures KVM: x86: Get CPL directly when checking if loaded vCPU is in kernel mode KVM: arm64: GICv4: Do not perform a map to a mapped vLPI KVM: s390/mm: Properly reset no-dat KVM: s390: vsie: fix wrong VIR 37 when MSO is used
2023-12-10Merge tag 'powerpc-6.7-4' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: - Fix stack teardown in ftrace_no_trace, seen as crashes doing CPU hotplug while ftrace is active. Thanks to Naveen N Rao. * tag 'powerpc-6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/ftrace: Fix stack teardown in ftrace_no_trace
2023-12-10Merge tag 'gpio-fixes-for-v6.7-rc5' of ↵Linus Torvalds1-6/+9
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fix from Bartosz Golaszewski: - fix an error path after a failed export in sysfs code * tag 'gpio-fixes-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpiolib: sysfs: Fix error handling on failed export
2023-12-09Merge tag 'usb-6.7-rc5' of ↵Linus Torvalds4-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 6.7-rc5 to resolve some reported issues. Included in here are: - usb gadget f_hid, and uevent fix - xhci driver revert to resolve a much-reported issue - typec driver fix All of these have been in linux-next with no reported issues" * tag 'usb-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: f_hid: fix report descriptor allocation Revert "xhci: Loosen RPM as default policy to cover for AMD xHC 1.1" usb: typec: class: fix typec_altmode_put_partner to put plugs USB: gadget: core: adjust uevent timing on gadget unbind
2023-12-09Merge tag 'tty-6.7-rc4' of ↵Linus Torvalds6-65/+85
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fixes from Greg KH: "Here are some small serial driver fixes for 6.7-rc4 to resolve some reported issues. Included in here are: - pl011 dma support fix - sc16is7xx driver fix - ma35d1 console index fix - 8250 driver fixes for small issues All of these have been in linux-next with no reported issues" * tag 'tty-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_dw: Add ACPI ID for Granite Rapids-D UART serial: ma35d1: Validate console index before assignment ARM: PL011: Fix DMA support serial: sc16is7xx: address RX timeout interrupt errata serial: 8250: 8250_omap: Clear UART_HAS_RHR_IT_DIS bit serial: 8250_omap: Add earlycon support for the AM654 UART controller serial: 8250: 8250_omap: Do not start RX DMA on THRI interrupt
2023-12-09Merge tag 'char-misc-6.7-rc5' of ↵Linus Torvalds16-74/+79
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver fixes from Greg KH: "Here are some small fixes for 6.7-rc5 for a variety of small driver subsystems. Included in here are: - debugfs revert for reported issue - greybus revert for reported issue - greybus fixup for endian build warning - coresight driver fixes - nvmem driver fixes - devcoredump fix - parport new device id - ndtest build fix All of these have ben in linux-next with no reported issues" * tag 'char-misc-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: nvmem: Do not expect fixed layouts to grab a layout driver parport: Add support for Brainboxes IX/UC/PX parallel cards Revert "greybus: gb-beagleplay: Ensure le for values in transport" greybus: gb-beagleplay: Ensure le for values in transport greybus: BeaglePlay driver needs CRC_CCITT Revert "debugfs: annotate debugfs handlers vs. removal with lockdep" devcoredump: Send uevent once devcd is ready ndtest: fix typo class_regster -> class_register misc: mei: client.c: fix problem of return '-EOVERFLOW' in mei_cl_write misc: mei: client.c: return negative error code in mei_cl_write mei: pxp: fix mei_pxp_send_message return value coresight: ultrasoc-smb: Fix uninitialized before use buf_hw_base coresight: ultrasoc-smb: Config SMB buffer before register sink coresight: ultrasoc-smb: Fix sleep while close preempt in enable_smb Documentation: coresight: fix `make refcheckdocs` warning hwtracing: hisi_ptt: Don't try to attach a task hwtracing: hisi_ptt: Handle the interrupt in hardirq context hwtracing: hisi_ptt: Add dummy callback pmu::read() coresight: Fix crash when Perf and sysfs modes are used concurrently coresight: etm4x: Remove bogous __exit annotation for some functions
2023-12-09Merge tag 'loongarch-fixes-6.7-2' of ↵Linus Torvalds7-20/+12
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Preserve syscall nr across execve(), slightly clean up drdtime(), fix the Clang built zboot kernel, fix a stack unwinder bug and several bpf jit bugs" * tag 'loongarch-fixes-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: BPF: Fix unconditional bswap instructions LoongArch: BPF: Fix sign-extension mov instructions LoongArch: BPF: Don't sign extend function return value LoongArch: BPF: Don't sign extend memory load operand LoongArch: Preserve syscall nr across execve() LoongArch: Set unwind stack type to unknown rather than set error flag LoongArch: Slightly clean up drdtime() LoongArch: Apply dynamic relocations for LLD
2023-12-09Merge tag 'mips-fixes_6.7_1' of ↵Linus Torvalds6-33/+64
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - Fixes for broken Loongson firmware - Fix lockdep splat - Fix FPU states when creating kernel threads * tag 'mips-fixes_6.7_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: kernel: Clear FPU states when setting up kernel threads MIPS: Loongson64: Handle more memory types passed from firmware MIPS: Loongson64: Enable DMA noncoherent support MIPS: Loongson64: Reserve vgabios memory on boot mips/smp: Call rcutree_report_cpu_starting() earlier
2023-12-09Merge tag 'perf-tools-fixes-for-v6.7-2-2023-12-08' of ↵Linus Torvalds3-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Namhyung Kim: "A random set of small bug fixes including: - Fix segfault on AmpereOne due to missing default metricgroup name - Fix segfault on `perf list --json` due to NULL pointer" * tag 'perf-tools-fixes-for-v6.7-2-2023-12-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: perf list: Fix JSON segfault by setting the used skip_duplicate_pmus callback perf vendor events arm64: AmpereOne: Add missing DefaultMetricgroupName fields perf metrics: Avoid segv if default metricgroup isn't set
2023-12-09Merge tag '6.7-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds4-58/+187
Pull smb client fixes from Steve French: "Six smb3 client fixes: - Fixes for copy_file_range and clone (cache invalidation and file size), also addresses an xfstest failure - Fix to return proper error if REMAP_FILE_DEDUP set (also fixes xfstest generic/304) - Fix potential null pointer reference with DFS - Multichannel fix addressing (reverting an earlier patch) some of the problems with enabling/disabling channels dynamically Still working on a followon multichannel fix to address another issue found in reconnect testing that will send next week" * tag '6.7-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: reconnect worker should take reference on server struct unconditionally Revert "cifs: reconnect work should have reference on server struct" cifs: Fix non-availability of dedup breaking generic/304 smb: client: fix potential NULL deref in parse_dfs_referrals() cifs: Fix flushing, invalidation and file size with FICLONE cifs: Fix flushing, invalidation and file size with copy_file_range()
2023-12-09LoongArch: BPF: Fix unconditional bswap instructionsTiezhu Yang1-2/+2
We can see that "bswap32: Takes an unsigned 32-bit number in either big- or little-endian format and returns the equivalent number with the same bit width but opposite endianness" in BPF Instruction Set Specification, so it should clear the upper 32 bits in "case 32:" for both BPF_ALU and BPF_ALU64. [root@linux fedora]# echo 1 > /proc/sys/net/core/bpf_jit_enable [root@linux fedora]# modprobe test_bpf Before: test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) After: test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 4 PASS test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 4 PASS Fixes: 4ebf9216e7df ("LoongArch: BPF: Support unconditional bswap instructions") Acked-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-09LoongArch: BPF: Fix sign-extension mov instructionsTiezhu Yang1-0/+2
We can see that "Short form of movsx, dst_reg = (s8,s16,s32)src_reg" in include/linux/filter.h, additionally, for BPF_ALU64 the value of the destination register is unchanged whereas for BPF_ALU the upper 32 bits of the destination register are zeroed, so it should clear the upper 32 bits for BPF_ALU. [root@linux fedora]# echo 1 > /proc/sys/net/core/bpf_jit_enable [root@linux fedora]# modprobe test_bpf Before: test_bpf: #81 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #82 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) After: test_bpf: #81 ALU_MOVSX | BPF_B jited:1 6 PASS test_bpf: #82 ALU_MOVSX | BPF_H jited:1 6 PASS By the way, the bpf selftest case "./test_progs -t verifier_movsx" can also be fixed with this patch. Fixes: f48012f16150 ("LoongArch: BPF: Support sign-extension mov instructions") Acked-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-09LoongArch: BPF: Don't sign extend function return valueHengqi Chen1-2/+0
The `cls_redirect` test triggers a kernel panic like: # ./test_progs -t cls_redirect Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. [ 30.938489] CPU 3 Unable to handle kernel paging request at virtual address fffffffffd814de0, era == ffff800002009fb8, ra == ffff800002009f9c [ 30.939331] Oops[#1]: [ 30.939513] CPU: 3 PID: 1260 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 #35 a896aca3f4164f09cc346f89f2e09832e07be5f6 [ 30.939732] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 30.939901] pc ffff800002009fb8 ra ffff800002009f9c tp 9000000104da4000 sp 9000000104da7ab0 [ 30.940038] a0 fffffffffd814de0 a1 9000000104da7a68 a2 0000000000000000 a3 9000000104da7c10 [ 30.940183] a4 9000000104da7c14 a5 0000000000000002 a6 0000000000000021 a7 00005555904d7f90 [ 30.940321] t0 0000000000000110 t1 0000000000000000 t2 fffffffffd814de0 t3 0004c4b400000000 [ 30.940456] t4 ffffffffffffffff t5 00000000c3f63600 t6 0000000000000000 t7 0000000000000000 [ 30.940590] t8 000000000006d803 u0 0000000000000020 s9 9000000104da7b10 s0 900000010504c200 [ 30.940727] s1 fffffffffd814de0 s2 900000010504c200 s3 9000000104da7c10 s4 9000000104da7ad0 [ 30.940866] s5 0000000000000000 s6 90000000030e65bc s7 9000000104da7b44 s8 90000000044f6fc0 [ 30.941015] ra: ffff800002009f9c bpf_prog_846803e5ae81417f_cls_redirect+0xa0/0x590 [ 30.941535] ERA: ffff800002009fb8 bpf_prog_846803e5ae81417f_cls_redirect+0xbc/0x590 [ 30.941696] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 30.942224] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 30.942330] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 30.942453] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 30.942612] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 30.942764] BADV: fffffffffd814de0 [ 30.942854] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 30.942974] Modules linked in: [ 30.943078] Process test_progs (pid: 1260, threadinfo=00000000ce303226, task=000000007d10bb76) [ 30.943306] Stack : 900000010a064000 90000000044f6fc0 9000000104da7b48 0000000000000000 [ 30.943495] 0000000000000000 9000000104da7c14 9000000104da7c10 900000010504c200 [ 30.943626] 0000000000000001 ffff80001b88c000 9000000104da7b70 90000000030e6668 [ 30.943785] 0000000000000000 9000000104da7b58 ffff80001b88c048 9000000003d05000 [ 30.943936] 900000000303ac88 0000000000000000 0000000000000000 9000000104da7b70 [ 30.944091] 0000000000000000 0000000000000001 0000000731eeab00 0000000000000000 [ 30.944245] ffff80001b88c000 0000000000000000 0000000000000000 54b99959429f83b8 [ 30.944402] ffff80001b88c000 90000000044f6fc0 9000000101d70000 ffff80001b88c000 [ 30.944538] 000000000000005a 900000010504c200 900000010a064000 900000010a067000 [ 30.944697] 9000000104da7d88 0000000000000000 9000000003d05000 90000000030e794c [ 30.944852] ... [ 30.944924] Call Trace: [ 30.945120] [<ffff800002009fb8>] bpf_prog_846803e5ae81417f_cls_redirect+0xbc/0x590 [ 30.945650] [<90000000030e6668>] bpf_test_run+0x1ec/0x2f8 [ 30.945958] [<90000000030e794c>] bpf_prog_test_run_skb+0x31c/0x684 [ 30.946065] [<90000000026d4f68>] __sys_bpf+0x678/0x2724 [ 30.946159] [<90000000026d7288>] sys_bpf+0x20/0x2c [ 30.946253] [<90000000032dd224>] do_syscall+0x7c/0x94 [ 30.946343] [<9000000002541c5c>] handle_syscall+0xbc/0x158 [ 30.946492] [ 30.946549] Code: 0015030e 5c0009c0 5001d000 <28c00304> 02c00484 29c00304 00150009 2a42d2e4 0280200d [ 30.946793] [ 30.946971] ---[ end trace 0000000000000000 ]--- [ 32.093225] Kernel panic - not syncing: Fatal exception in interrupt [ 32.093526] Kernel relocated by 0x2320000 [ 32.093630] .text @ 0x9000000002520000 [ 32.093725] .data @ 0x9000000003400000 [ 32.093792] .bss @ 0x9000000004413200 [ 34.971998] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- This is because we signed-extend function return values. When subprog mode is enabled, we have: cls_redirect() -> get_global_metrics() returns pcpu ptr 0xfffffefffc00b480 The pointer returned is later signed-extended to 0xfffffffffc00b480 at `BPF_JMP | BPF_EXIT`. During BPF prog run, this triggers unhandled page fault and a kernel panic. Drop the unnecessary signed-extension on return values like other architectures do. With this change, we have: # ./test_progs -t cls_redirect Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. #51/1 cls_redirect/cls_redirect_inlined:OK #51/2 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK #51/3 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK #51/4 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK #51/5 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK #51/6 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK #51/7 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK #51/8 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK #51/9 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK #51/10 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK #51/11 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK #51/12 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK #51/13 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK #51/14 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK #51/15 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK #51/16 cls_redirect/cls_redirect_subprogs:OK #51/17 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK #51/18 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK #51/19 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK #51/20 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK #51/21 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK #51/22 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK #51/23 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK #51/24 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK #51/25 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK #51/26 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK #51/27 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK #51/28 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK #51/29 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK #51/30 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK #51/31 cls_redirect/cls_redirect_dynptr:OK #51/32 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK #51/33 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK #51/34 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK #51/35 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK #51/36 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK #51/37 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK #51/38 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK #51/39 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK #51/40 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK #51/41 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK #51/42 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK #51/43 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK #51/44 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK #51/45 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK #51 cls_redirect:OK Summary: 1/45 PASSED, 0 SKIPPED, 0 FAILED Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support") Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-09LoongArch: BPF: Don't sign extend memory load operandHengqi Chen1-8/+2
The `cgrp_local_storage` test triggers a kernel panic like: # ./test_progs -t cgrp_local_storage Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. [ 550.930632] CPU 1 Unable to handle kernel paging request at virtual address 0000000000000080, era == ffff80000200be34, ra == ffff80000200be00 [ 550.931781] Oops[#1]: [ 550.931966] CPU: 1 PID: 1303 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 #35 a896aca3f4164f09cc346f89f2e09832e07be5f6 [ 550.932215] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 550.932403] pc ffff80000200be34 ra ffff80000200be00 tp 9000000108350000 sp 9000000108353dc0 [ 550.932545] a0 0000000000000000 a1 0000000000000517 a2 0000000000000118 a3 00007ffffbb15558 [ 550.932682] a4 00007ffffbb15620 a5 90000001004e7700 a6 0000000000000021 a7 0000000000000118 [ 550.932824] t0 ffff80000200bdc0 t1 0000000000000517 t2 0000000000000517 t3 00007ffff1c06ee0 [ 550.932961] t4 0000555578ae04d0 t5 fffffffffffffff8 t6 0000000000000004 t7 0000000000000020 [ 550.933097] t8 0000000000000040 u0 00000000000007b8 s9 9000000108353e00 s0 90000001004e7700 [ 550.933241] s1 9000000004005000 s2 0000000000000001 s3 0000000000000000 s4 0000555555eb2ec8 [ 550.933379] s5 00007ffffbb15bb8 s6 00007ffff1dafd60 s7 000055555663f610 s8 00007ffff1db0050 [ 550.933520] ra: ffff80000200be00 bpf_prog_98f1b9e767be2a84_on_enter+0x40/0x200 [ 550.933911] ERA: ffff80000200be34 bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200 [ 550.934105] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 550.934596] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 550.934712] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 550.934836] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 550.934976] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 550.935097] BADV: 0000000000000080 [ 550.935181] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 550.935291] Modules linked in: [ 550.935391] Process test_progs (pid: 1303, threadinfo=000000006c3b1c41, task=0000000061f84a55) [ 550.935643] Stack : 00007ffffbb15bb8 0000555555eb2ec8 0000000000000000 0000000000000001 [ 550.935844] 9000000004005000 ffff80001b864000 00007ffffbb15450 90000000029aa034 [ 550.935990] 0000000000000000 9000000108353ec0 0000000000000118 d07d9dfb09721a09 [ 550.936175] 0000000000000001 0000000000000000 9000000108353ec0 0000000000000118 [ 550.936314] 9000000101d46ad0 900000000290abf0 000055555663f610 0000000000000000 [ 550.936479] 0000000000000003 9000000108353ec0 00007ffffbb15450 90000000029d7288 [ 550.936635] 00007ffff1dafd60 000055555663f610 0000000000000000 0000000000000003 [ 550.936779] 9000000108353ec0 90000000035dd1f0 00007ffff1dafd58 9000000002841c5c [ 550.936939] 0000000000000119 0000555555eea5a8 00007ffff1d78780 00007ffffbb153e0 [ 550.937083] ffffffffffffffda 00007ffffbb15518 0000000000000040 00007ffffbb15558 [ 550.937224] ... [ 550.937299] Call Trace: [ 550.937521] [<ffff80000200be34>] bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200 [ 550.937910] [<90000000029aa034>] bpf_trace_run2+0x90/0x154 [ 550.938105] [<900000000290abf0>] syscall_trace_enter.isra.0+0x1cc/0x200 [ 550.938224] [<90000000035dd1f0>] do_syscall+0x48/0x94 [ 550.938319] [<9000000002841c5c>] handle_syscall+0xbc/0x158 [ 550.938477] [ 550.938607] Code: 580009ae 50016000 262402e4 <28c20085> 14092084 03a00084 16000024 03240084 00150006 [ 550.938851] [ 550.939021] ---[ end trace 0000000000000000 ]--- Further investigation shows that this panic is triggered by memory load operations: ptr = bpf_cgrp_storage_get(&map_a, task->cgroups->dfl_cgrp, 0, BPF_LOCAL_STORAGE_GET_F_CREATE); The expression `task->cgroups->dfl_cgrp` involves two memory load. Since the field offset fits in imm12 or imm14, we use ldd or ldptrd instructions. But both instructions have the side effect that it will signed-extended the imm operand. Finally, we got the wrong addresses and panics is inevitable. Use a generic ldxd instruction to avoid this kind of issues. With this change, we have: # ./test_progs -t cgrp_local_storage Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec #48/1 cgrp_local_storage/tp_btf:OK test_attach_cgroup:PASS:skel_open 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22 test_attach_cgroup:FAIL:prog_attach unexpected error: -524 #48/2 cgrp_local_storage/attach_cgroup:FAIL test_recursion:PASS:skel_open_and_load 0 nsec libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'on_lookup': failed to auto-attach: -524 test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524) #48/3 cgrp_local_storage/recursion:FAIL #48/4 cgrp_local_storage/negative:OK #48/5 cgrp_local_storage/cgroup_iter_sleepable:OK test_yes_rcu_lock:PASS:skel_open 0 nsec test_yes_rcu_lock:PASS:skel_load 0 nsec libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524 test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524) #48/6 cgrp_local_storage/yes_rcu_lock:FAIL #48/7 cgrp_local_storage/no_rcu_lock:OK #48 cgrp_local_storage:FAIL All error logs: test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec test_attach_cgroup:PASS:skel_open 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22 test_attach_cgroup:FAIL:prog_attach unexpected error: -524 #48/2 cgrp_local_storage/attach_cgroup:FAIL test_recursion:PASS:skel_open_and_load 0 nsec libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'on_lookup': failed to auto-attach: -524 test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524) #48/3 cgrp_local_storage/recursion:FAIL test_yes_rcu_lock:PASS:skel_open 0 nsec test_yes_rcu_lock:PASS:skel_load 0 nsec libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524 test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524) #48/6 cgrp_local_storage/yes_rcu_lock:FAIL #48 cgrp_local_storage:FAIL Summary: 0/4 PASSED, 0 SKIPPED, 1 FAILED No panics any more (The test still failed because lack of BPF trampoline which I am actively working on). Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support") Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-12-09LoongArch: Preserve syscall nr across execve()Hengqi Chen1-1/+1
Currently, we store syscall nr in pt_regs::regs[11] and syscall execve() accidentally overrides it during its execution: sys_execve() -> do_execve() -> do_execveat_common() -> bprm_execve() -> exec_binprm() -> search_binary_handler() -> load_elf_binary() -> ELF_PLAT_INIT() ELF_PLAT_INIT() reset regs[11] to 0, so in syscall_exit_to_user_mode() we later get a wrong syscall nr. This breaks tools like execsnoop since it relies on execve() tracepoints. Skip pt_regs::regs[11] reset in ELF_PLAT_INIT() to fix the issue. Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 08:44:37 +0300