summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-07-03drm/vmwgfx: Use a mutex to protect gui positioning in vmw_display_unitDeepak Rawat3-11/+37
To avoid race condition between update_layout ioctl and modeset ioctl for access to gui_x/y positioning added a new mutex requested_layout_mutex. Also used drm_for_each_connector_iter to iterate over connector list. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-07-03drm/vmwgfx: Remove primary memory validation against mode while creating fbDeepak Rawat1-13/+0
This validation is not required because user-space will send create_fb request once the memory is allocated. This check should be performed during mode-setting. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-07-03drm/vmwgfx: Perform memory validations only when need full modeset.Deepak Rawat1-2/+21
For cases when full modeset is not requested like page-flip, skip memory validation as the topology is not changed. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-07-03drm/vmwgfx: Use modeset display memory validation for layout ioctlDeepak Rawat1-69/+51
Call the same display memory validation function which is used by modeset_check. This ensure consistency that kernel change preferred mode/topology only if supported. Also change the internal function to use drm_rect instead of drm_vmw_rect. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-07-03drm/vmwgfx: Perform topology validation during atomic modeset.Deepak Rawat2-38/+177
This patch adds display (primary) memory validation during modeset check. Display memory validation are applicable to both SOU and STDU, so allow both display unit to undergo this check. Also added check for SVGA_CAP_NO_BB_RESTRICTION capability which lifts bounding box restriction for STDU. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-07-03drm/vmwgfx: Fix atomic mode set checkSinclair Yeh1-14/+26
vmw_kms_atomic_check_modeset() is currently checking config using the legacy state, which is updated after a commit has happened. This means vmw_kms_atomic_check_modeset() will reject an invalid config on the next update rather than the current one. Fix this by using the new states for config checking Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-07-03drm/vmwgfx: Use blocking buffer object reserves when evicting resourcesThomas Hellstrom1-10/+19
Previously when evicting resources we were unconditionally calling ttm_eu_reserve_buffers with a NULL ww acquire context. That meant all buffer object reserves were done using trylock semantics. That makes sense when evicting during resource validation, because then there already are a number of buffers reserved and using waiting locks would cause lockdep errors. That's not the case when unconditionally evicting all resources as part of driver takedown or hibernation, so in that code path, make sure we have a ww acquire context to get waiting lock buffer object reserve semantics. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2018-07-03drm/vmwgfx: Optimize the buffer object swap_notify callback somewhat.Thomas Hellstrom1-4/+6
Only try to unmap cached maps when the buffer is moved into or out from vram. Otherwise the underlying pages stay the same. Also when unbinding resources from MOBs about to move, make sure we're really moving out of MOB memory. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com>
2018-07-03drm/vmwgfx: Move buffer object related code to vmwgfx_bo.cThomas Hellstrom11-708/+851
It makes more sense to have all the buffer object related code in a single file rather than splitting it up between the resource code and buffer object pinning utilities. Place all buffer object related code in vmwgfx_bo.c. Fix up headers and export resource functionality when needed in the buffer object code. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com>
2018-07-03drm/vmwgfx: Replace vmw_dma_buffer with vmw_buffer_objectThomas Hellstrom20-607/+589
Initially vmware buffer objects were only used as DMA buffers, so the name DMA buffer was a natural one. However, currently they are used also as dumb buffers and MOBs backing guest backed objects so renaming them to buffer objects is logical. Particularly since there is a dmabuf subsystem in the kernel where a dma buffer means something completely different. This also renames user-space api structures and IOCTL names correspondingly, but the old names remain defined for now and the ABI hasn't changed. There are a couple of minor style changes to make checkpatch happy. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com>
2018-07-03drm: Change deadlock-avoidance algorithm for the modeset locks.Thomas Hellstrom1-1/+1
For modeset locks we don't expect a high number of contending transactions so change algorithm from Wait-Die to Wound-Wait. Cc: dri-devel@lists.freedesktop.org Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-07-03locking: Implement an algorithm choice for Wound-Wait mutexesThomas Hellstrom8-36/+213
The current Wound-Wait mutex algorithm is actually not Wound-Wait but Wait-Die. Implement also Wound-Wait as a per-ww-class choice. Wound-Wait is, contrary to Wait-Die a preemptive algorithm and is known to generate fewer backoffs. Testing reveals that this is true if the number of simultaneous contending transactions is small. As the number of simultaneous contending threads increases, Wait-Wound becomes inferior to Wait-Die in terms of elapsed time. Possibly due to the larger number of held locks of sleeping transactions. Update documentation and callers. Timings using git://people.freedesktop.org/~thomash/ww_mutex_test tag patch-18-06-15 Each thread runs 100000 batches of lock / unlock 800 ww mutexes randomly chosen out of 100000. Four core Intel x86_64: Algorithm #threads Rollbacks time Wound-Wait 4 ~100 ~17s. Wait-Die 4 ~150000 ~19s. Wound-Wait 16 ~360000 ~109s. Wait-Die 16 ~450000 ~82s. Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-doc@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Co-authored-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-07-03locking: WW mutex cleanupPeter Ziljstra3-97/+145
Make the WW mutex code more readable by adding comments, splitting up functions and pointing out that we're actually using the Wait-Die algorithm. Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-doc@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Co-authored-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-06-28Merge tag 'drm-misc-next-2018-06-27' of ↵Dave Airlie45-321/+1854
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 4.19: Cross-subsystem Changes: devicetree documentation dt-bindings defintions for sun8i (Jernej Skrabec) Core Changes: Consider drivers setting DRIVER_ATOMIC as atomic (Eric Anholt) Improvements for in-kernel clients (Noralf Trønnes) Export and rename drm_crtc_port_mask() (Jernej Skrabec) Driver Changes: v3d: Add looking for GPU scheduler jobs management (Eric Anholt) Add Ilitek ILI9881c panel driver(Maxime Ripard) rockchip: vop: fixup linebuffer mode calc error (Sandy Huang) tinydrm: new driver for ILI9341 display panels (David Lechner) sun4i: Add TCON TOP driver (Jernej Skrabec) Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180628010018.GA10929@juma
2018-06-28Merge tag 'drm-intel-next-2018-06-20' of ↵Dave Airlie100-3087/+4453
git://anongit.freedesktop.org/drm/drm-intel into drm-next Chris is doing many reworks that allow us to get full-ppgtt supported on all platforms back to HSW. As well many other fix and improvements, Including: - Use GEM suspend when aborting initialization (Chris) - Change i915_gem_fault to return vm_fault_t (Chris) - Expand VMA to Non gem object entities (Chris) - Improve logs for load failure, but quite logging on fault injection to avoid noise on CI (Chris) - Other page directory handling fixes and improvements for gen6 (Chris) - Other gtt clean-up removing redundancies and unused checks (Chris) - Reorder aliasing ppgtt fini (Chris) - Refactor of unsetting obg->mm.pages (Chris) - Apply batch location restrictions before pinning (Chris) - Ringbuffer fixes for context restore (Chris) - Execlist fixes on freeing error pointer on allocation error (Chris) - Make closing request flush mandatory (Chris) - Move GEM sanitize from resume_early to resume (Chris) - Improve debug dumps (Chris) - Silent compiler for selftest (Chris) - Other execlists changes to improve hangcheck and reset. - Many gtt page directory fixes and improvements (Chris) - Reorg context workarounds (Chris) - Avoid ERR_PTR dereference on selftest (Chris) Other GEM related work: - Stop trying to reset GPU if reset failed (Mika) - Add HW workaround for KBL to fix GPU reset (Mika) - Fix context ban and hang accounting for client (Mika) - Fixes on OA perf (Michel, Jani) - Refactor on GuC log mechanisms (Piotr) - Enable provoking vertex fix on Gen9 system (Kenneth) More ICL patches for Display enabling: - ICL - 10-bit support for HDMI (RK) - ICL - Start adding TBT PLL (Paulo) - ICL - DDI HDMK level selection (Manasi) - ICL - GMBUS GPIO pin mapping fix (Mahesh) - ICL - Adding DP_AUX_E support (James) - ICL - Display interrupts handling (DK) Other display fixes and improvements: - Fix sprite destination color keying on SKL+ (Ville) - Fixes and improvements on PCH detection, specially for non PCH systems (Jani) - Document PCH_NOP (Lucas) - Allow DBLSCAN user modes with eDP/LVDS/DSI (Ville) - Opregion and ACPI cleanup and organization (Jani) - Kill delays when activation psr (Rodrigo) - ...and a consequent fix of the psr activation flow (DK) - Fix HDMI infoframe setting (Imre) - Fix Display interrupts and modes on old gens (Ville) - Start switching to kernel unsigned int types (Jani) - Introduction to Amber Lake and Whiskey Lake platforms (Jose) - Audio clock fixes for HBR3 (RK) - Standardize i915_reg.h definitions according to our doc and checkpatch (Paulo) - Remove unused timespec_to_jiffies_timeout function (Arnd) - Increase the scope of PSR wake fix for other VBTs out there (Vathsala) - Improve debug msgs with prop name/id (Ville) - Other clean up on unecessary cursor size defines (Ville) - Enforce max hdisplay/hblank_start limits on HSW/BDW (Ville) - Make ELD pointers constant (Jani) - Fix for PSR VBT parse (Colin) - Add warn about unsupported CDCLK rates (Imre) Signed-off-by: Dave Airlie <airlied@redhat.com> # gpg: Signature made Thu 21 Jun 2018 07:12:10 AM AEST # gpg: using RSA key FA625F640EEB13CA # gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>" # gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA Link: https://patchwork.freedesktop.org/patch/msgid/20180625165622.GA21761@intel.com
2018-06-27drm/sun4i: DW HDMI: Expand algorithm for possible crtcsJernej Skrabec1-1/+45
drm_of_find_possible_crtcs() doesn't work when DW HDMI encoder is connected to TCON (crtc) through mux in TCON TOP. In that case TCON TOP HDMI mux input port has to be manually traversed and checked if it matches any known crtc. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-23-jernej.skrabec@siol.net
2018-06-27drm: of: Export and rename drm_crtc_port_mask()Jernej Skrabec2-4/+13
Function is useful when drm_of_find_possible_crtcs() can't be used and custom parsing is needed. This can happen for example when there is a node with multiple muxes between crtc and encoder. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> [maxime: change the function to have a consistent prefix] Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-22-jernej.skrabec@siol.net
2018-06-27drm/sun4i: Add support for A64 HDMI PHYJernej Skrabec1-0/+12
PHY is the same as in H3, except it can switch between two clock parents. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-21-jernej.skrabec@siol.net
2018-06-27drm/sun4i: Add support for second clock parent to DW HDMI PHY clk driverJernej Skrabec3-24/+73
Expand HDMI PHY clock driver to support second clock parent. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-20-jernej.skrabec@siol.net
2018-06-27drm/sun4i: DW HDMI PHY: Add support for second PLLJernej Skrabec2-5/+17
Some DW HDMI PHYs, like those found in A64 and R40 SoCs, can select between two clock parents. Add code which reads second PLL from DT. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-19-jernej.skrabec@siol.net
2018-06-27drm/sun4i: Don't change clock bits in DW HDMI PHY driverJernej Skrabec2-2/+12
DW HDMI PHY driver and PHY clock driver share same registers. Make sure that DW HDMI PHY setup code doesn't change any clock related bits. During initialization, set PHY PLL parent bit to 0. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-18-jernej.skrabec@siol.net
2018-06-27drm/sun4i: Enable DW HDMI PHY clockJernej Skrabec1-1/+6
Current DW HDMI PHY code never prepares and enables PHY clock after it is created. It's just used as it is. This may work in some cases, but it's clearly wrong. Fix it by adding proper calls to enable/disable PHY clock. Fixes: 4f86e81748fe ("drm/sun4i: Add support for H3 HDMI PHY variant") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-17-jernej.skrabec@siol.net
2018-06-27dt-bindings: display: sun4i-drm: Add description of A64 HDMI PHYJernej Skrabec1-1/+3
A64 HDMI PHY is similar to H3 HDMI PHY except it has two possible PLL clock parents. It is compatible to other HDMI PHYs, like that found in R40. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-16-jernej.skrabec@siol.net
2018-06-27drm/sun4i: Add support for R40 mixersJernej Skrabec1-0/+24
Both mixers have similar capabilities as others SoCs with DE2. First mixer has 1 VI and 3 UI planes and supports HW scaling on all planes. Second mixer has 1 VI and 1 UI planes and also supports HW scaling on all planes. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-15-jernej.skrabec@siol.net
2018-06-27drm/sun4i: Don't check for panel or bridge on TV TCONsJernej Skrabec1-3/+9
TV TCONs are always connected to TV or HDMI encoder, so it doesn't make sense to check if panel or bridge is connected to them. Check if TCON has channel 0 and only then check for connected panel or bridges. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-13-jernej.skrabec@siol.net
2018-06-27drm/sun4i: Don't check for LVDS and RGB when TCON has only ch1Jernej Skrabec1-15/+17
LVDS and RGB interfaces are always connected to TCONs which have channel 0. It doesn't make sense to try to init them on TV TCONs. Add a check if TCON has channel 0 before trying to init LVDS or RGB interface. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-12-jernej.skrabec@siol.net
2018-06-27drm/sun4i: tcon: Generalize engine search algorithmJernej Skrabec1-4/+18
Current "old" method to find engine worked pretty well for DE2. However, it doesn't work when TCON TOP is between mixer (engine) and TCON. TCON TOP has multiple input ports, but current engine search algorithm expects only one. This can be fixed by first looking for output port id and selecting matching input by subtracting 1 for the next round. This work even if there is only one input and output. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-11-jernej.skrabec@siol.net
2018-06-27drm/sun4i: Don't skip TCONs if they don't have channel 0Jernej Skrabec1-17/+35
TV TCONs (channel 1 only) are always connected to TV or HDMI encoder. Because of that, all output endpoints on such TCON node will point to a encoder which is part of component framework. Correct current graph traversing algorithm in such way that it doesn't skip output enpoints with id 0 on TV TCONs. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-10-jernej.skrabec@siol.net
2018-06-27drm/sun4i: Add support for traversing graph with TCON TOPJernej Skrabec1-0/+24
TCON TOP is different from other nodes in graph by having 3 input and 3 output ports. Additionally, connection to TV TCON might lead back to HDMI mux input port, creating loops. Add support for traversing such graph. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-9-jernej.skrabec@siol.net
2018-06-27drm/sun4i: Split out code for enumerating endpoints in output portJernej Skrabec1-38/+46
Until now, each node has one input port and one output port. However, with TCON TOP this is no longer true. It has 3 input and 3 output ports. In order to prepare to this situation, split out the code which checks all endpoints in input port and adds available components to fifo. This patch doesn't do any functional change. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-8-jernej.skrabec@siol.net
2018-06-27drm/sun4i: Fix releasing node when enumerating enpointsJernej Skrabec1-1/+2
sun4i_drv_add_endpoints() has a memory leak since it uses of_node_put() when remote is equal to NULL and does nothing when remote has a valid pointer. Invert the logic to fix memory leak. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-7-jernej.skrabec@siol.net
2018-06-27drm/sun4i: Add TCON TOP driverJernej Skrabec3-1/+341
As already described in DT binding, TCON TOP is responsible for configuring display pipeline. In this initial driver focus is on HDMI pipeline, so TVE and LCD configuration is not implemented. Implemented features: - HDMI source selection - clock driver (TCON and DSI gating) - connecting mixers and TCONS Something similar also existed in previous SoCs, except that it was part of first TCON. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-6-jernej.skrabec@siol.net
2018-06-27dt-bindings: display: sunxi-drm: Add TCON TOP descriptionJernej Skrabec2-0/+67
TCON TOP main purpose is to configure whole display pipeline. It determines relationships between mixers and TCONs, selects source TCON for HDMI, muxes LCD and TV encoder GPIO output, selects TV encoder clock source and contains additional TV TCON and DSI gates. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-5-jernej.skrabec@siol.net
2018-06-27drm/tinydrm: new driver for ILI9341 display panelsDavid Lechner4-0/+250
This adds a new driver for display panels that use the Ilitek ILI9341 controller. It currently supports a single display panel, namely the YX240QV29-T (e.g. Adafruit 2.4" TFT). The init sequence is from the Adafruit Python library for the ILI9341 controller. https://github.com/adafruit/Adafruit_Python_ILI9341 Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180525193623.15533-5-david@lechnology.com
2018-06-27dt-bindings: new binding for Ilitek ILI9341 display panelsDavid Lechner1-0/+27
This adds a new binding for Ilitek ILI9341 display panels. It includes a compatible string for one display (more can be added in the future). The YX240QV29-T panel[1] is found, for example, in an Adafruit breakout board[2] and in Mindsensors' PiStorms[3]. The vendor prefix "adafruit" is used because the actual vendor is not known, but Adafruit is the most common source for a product that contains this panel. [1]: https://cdn-learn.adafruit.com/assets/assets/000/046/879/original/SPEC-YX240QV29-T_Rev.A__1_.pdf [2]: https://www.adafruit.com/product/2478 [3]: http://www.mindsensors.com/stem-with-robotics/13-pistorms-v2-base-kit-raspberry-pi-brain-for-lego-robot Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180525193623.15533-4-david@lechnology.com
2018-06-27dt-bindings: Add vendor prefix for AdafruitDavid Lechner1-0/+1
This adds a device tree vendor prefix for Adafruit Industries, LLC. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180525193623.15533-3-david@lechnology.com
2018-06-27MAINTAINERS: fix path to ilitek, ili9225 device tree bindingsDavid Lechner1-1/+1
This fixes the path to the ilitek,ili9225 device tree binding file. Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180525193623.15533-2-david@lechnology.com
2018-06-27drm/rockchip: vop: fixup linebuffer mode calc errorSandy Huang1-10/+13
linebuffer mode should be LB_YUV_3840X5 when width is bigger than 1280 in yuv mode. Separate yuv and rgb case makes the scl_vop_cal_lb_mode() logic clearer. Signed-off-by: Sandy Huang <hjc@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/1530001004-25036-1-git-send-email-hjc@rock-chips.com
2018-06-27drm/rockchip: Use drm_crtc_mask()Ville Syrjälä1-1/+1
Use drm_crtc_mask() where appropriate. Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180626194716.12522-7-ville.syrjala@linux.intel.com
2018-06-26drm/gma500: Fix compile warningGustavo A. R. Silva1-1/+0
Fix the following compile warning: warning: unused variable ‘psbfb’ [-Wunused-variable] struct psb_framebuffer *psbfb = to_psb_fb(fb); Fixes: c7cbed560ce2 ("drm/gma500: Fix Medfield for drm_framebuffer move") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625123355.GA16757@embeddedor.com
2018-06-26drm/gma500: Fix potential NULL pointer dereferenceGustavo A. R. Silva1-1/+3
fb is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after fb has been properly null checked at line 74: if (!fb) Addresses-Coverity-ID: 1470169 ("Dereference before null check") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180625121844.GA12466@embeddedor.com
2018-06-26drm/gma500: Replace drm_gem_object_unreference_unlocked with put functionThomas Zimmermann3-5/+5
This patch unifies the naming of DRM functions for reference counting of struct drm_gem_object. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <contact@tzimmermann.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180625152148.29555-1-contact@tzimmermann.org
2018-06-25drm/panel: Add Ilitek ILI9881c panel driverMaxime Ripard3-0/+513
The LHR050H41 panel is the panel shipped with the BananaPi M2-Magic, and is based on the Ilitek ILI9881c Controller. Add a driver for it, modelled after the other Ilitek controller drivers. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/acb5453112ab7c7b801cf4f1669e351b391e77e8.1527587352.git-series.maxime.ripard@bootlin.com
2018-06-25dt-bindings: panel: Add the Ilitek ILI9881c panel documentationMaxime Ripard1-0/+20
The LHR050H41 from BananaPi is a 1280x700 4-lanes DSI panel based on the ILI9881c from Ilitek. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/a348cdd07d3287e8203ee8d840ea279fe10a6204.1527587352.git-series.maxime.ripard@bootlin.com
2018-06-25drm: kirin: Remove useless "Scale not support" error messageJohn Stultz1-1/+0
The driver doesn't support scaling, but when an atomic test is done it repeatedly spits out this warning which isn't particularly useful. So just remove the error message. Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Peter Griffin <peter.griffin@linaro.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1529622076-20386-1-git-send-email-john.stultz@linaro.org
2018-06-25drm: Make ioctls available for in-kernel clientsNoralf Trønnes4-30/+64
Make ioctl wrappers for functions that will be used by the in-kernel API. The following functions are touched: - drm_mode_create_dumb_ioctl() - drm_mode_destroy_dumb_ioctl() - drm_mode_addfb() - drm_mode_rmfb() Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180618141739.48151-4-noralf@tronnes.org
2018-06-25drm/file: Don't set master on in-kernel clientsNoralf Trønnes1-9/+9
It only makes sense for userspace clients. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180618141739.48151-3-noralf@tronnes.org
2018-06-25drm: provide management functions for drm_fileDavid Herrmann2-132/+175
Rather than doing drm_file allocation/destruction right in the fops, lets provide separate helpers. This decouples drm_file management from the still-mandatory drm-fops. It prepares for use of drm_file without the fops, both by possible separate fops implementations and APIs (not that I am aware of any such plans), and more importantly from in-kernel use where no real file is available. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180618141739.48151-2-noralf@tronnes.org
2018-06-25drm/omap: remove now unused functionsChristian König1-17/+0
Some functions are unused after removal of the kmap_atomic DMA-buf interface. Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: f664a5269542 ("dma-buf: remove kmap_atomic interface") Link: https://patchwork.freedesktop.org/series/45245/ Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-06-22drm: Consider drivers setting DRIVER_ATOMIC as atomic.Eric Anholt1-11/+12
Drivers such as vc4 don't initialize mode_config.funcs until later in initialization, but we know they're atomic since they've got the flag set. This avoids oopsing on dereferencing funcs in the new atomic methods sanity checks. I moved the atomic check function down below the core flag check, to avoid needing a prototype. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: ba1f665f161c ("drm: Add checks for atomic_[duplicate/destroy]_state with atomic drivers") Link: https://patchwork.freedesktop.org/patch/msgid/20180621195428.17447-1-eric@anholt.net Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 09:04:13 +0300