summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-03-29net: dsa: mv88e6xxx: Factor out common initialization codeGuenter Roeck5-12/+22
Code used and needed in mv886xxx.c should be initialized there as well, so factor it out from the individual initialization files. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29hv_netvsc: remove vmbus_are_subchannels_present() in rndis_filter_device_add()Haiyang Zhang1-2/+0
The vmbus_are_subchannels_present() also involves opening the channels, which may be too early at this point. Checking for subchannels is not necessary here. So this patch removes it. Subchannels will be opened when offer messages arrive. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29net: smc91x: make use of 4th parameter to devm_gpiod_get_indexUwe Kleine-König1-17/+8
Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions) which appeared in v3.17-rc1, the gpiod_get* functions take an additional parameter that allows to specify direction and initial value for output. Simplify accordingly. Moreover use devm_gpiod_get_index_optional for still simpler handling. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29netns: don't clear nsid too early on removalNicolas Dichtel1-9/+15
With the current code, ids are removed too early. Suppose you have an ipip interface that stands in the netns foo and its link part in the netns bar (so the netns bar has an nsid into the netns foo). Now, you remove the netns bar: - the bar nsid into the netns foo is removed - the netns exit method of ipip is called, thus our ipip iface is removed: => a netlink message is sent in the netns foo to advertise this deletion => this netlink message requests an nsid for bar, thus a new nsid is allocated for bar and never removed. We must remove nsids when we are sure that nobody will refer to netns currently cleaned. Fixes: 0c7aecd4bde4 ("netns: add rtnl cmd to add and get peer netns ids") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29hv_netvsc: Implement batching in send bufferHaiyang Zhang4-47/+162
With this patch, we can send out multiple RNDIS data packets in one send buffer slot and one VMBus message. It reduces the overhead associated with VMBus messages. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller16-238/+513
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree. Basically, nf_tables updates to add the set extension infrastructure and finish the transaction for sets from Patrick McHardy. More specifically, they are: 1) Move netns to basechain and use recently added possible_net_t, from Patrick McHardy. 2) Use LOGLEVEL_<FOO> from nf_log infrastructure, from Joe Perches. 3) Restore nf_log_trace that was accidentally removed during conflict resolution. 4) nft_queue does not depend on NETFILTER_XTABLES, starting from here all patches from Patrick McHardy. 5) Use raw_smp_processor_id() in nft_meta. Then, several patches to prepare ground for the new set extension infrastructure: 6) Pass object length to the hash callback in rhashtable as needed by the new set extension infrastructure. 7) Cleanup patch to restore struct nft_hash as wrapper for struct rhashtable 8) Another small source code readability cleanup for nft_hash. 9) Convert nft_hash to rhashtable callbacks. And finally... 10) Add the new set extension infrastructure. 11) Convert the nft_hash and nft_rbtree sets to use it. 12) Batch set element release to avoid several RCU grace period in a row and add new function nft_set_elem_destroy() to consolidate set element release. 13) Return the set extension data area from nft_lookup. 14) Refactor existing transaction code to add some helper functions and document it. 15) Complete the set transaction support, using similar approach to what we already use, to activate/deactivate elements in an atomic fashion. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29Merge branch 'tipc-next'David S. Miller7-62/+87
Ying Xue says: ==================== tipc: fix two corner issues The patch set aims at resolving the following two critical issues: Patch #1: Resolve a deadlock which happens while all links are reset Patch #2: Correct a mistake usage of RCU lock which is used to protect node list ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29tipc: involve reference counter for node structureYing Xue6-30/+79
TIPC node hash node table is protected with rcu lock on read side. tipc_node_find() is used to look for a node object with node address through iterating the hash node table. As the entire process of what tipc_node_find() traverses the table is guarded with rcu read lock, it's safe for us. However, when callers use the node object returned by tipc_node_find(), there is no rcu read lock applied. Therefore, this is absolutely unsafe for callers of tipc_node_find(). Now we introduce a reference counter for node structure. Before tipc_node_find() returns node object to its caller, it first increases the reference counter. Accordingly, after its caller used it up, it decreases the counter again. This can prevent a node being used by one thread from being freed by another thread. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29tipc: fix potential deadlock when all links are resetYing Xue5-32/+8
[ 60.988363] ====================================================== [ 60.988754] [ INFO: possible circular locking dependency detected ] [ 60.989152] 3.19.0+ #194 Not tainted [ 60.989377] ------------------------------------------------------- [ 60.989781] swapper/3/0 is trying to acquire lock: [ 60.990079] (&(&n_ptr->lock)->rlock){+.-...}, at: [<ffffffffa0006dca>] tipc_link_retransmit+0x1aa/0x240 [tipc] [ 60.990743] [ 60.990743] but task is already holding lock: [ 60.991106] (&(&bclink->lock)->rlock){+.-...}, at: [<ffffffffa00004be>] tipc_bclink_lock+0x8e/0xa0 [tipc] [ 60.991738] [ 60.991738] which lock already depends on the new lock. [ 60.991738] [ 60.992174] [ 60.992174] the existing dependency chain (in reverse order) is: [ 60.992174] -> #1 (&(&bclink->lock)->rlock){+.-...}: [ 60.992174] [<ffffffff810a9c0c>] lock_acquire+0x9c/0x140 [ 60.992174] [<ffffffff8179c41f>] _raw_spin_lock_bh+0x3f/0x50 [ 60.992174] [<ffffffffa00004be>] tipc_bclink_lock+0x8e/0xa0 [tipc] [ 60.992174] [<ffffffffa0000f57>] tipc_bclink_add_node+0x97/0xf0 [tipc] [ 60.992174] [<ffffffffa0011815>] tipc_node_link_up+0xf5/0x110 [tipc] [ 60.992174] [<ffffffffa0007783>] link_state_event+0x2b3/0x4f0 [tipc] [ 60.992174] [<ffffffffa00193c0>] tipc_link_proto_rcv+0x24c/0x418 [tipc] [ 60.992174] [<ffffffffa0008857>] tipc_rcv+0x827/0xac0 [tipc] [ 60.992174] [<ffffffffa0002ca3>] tipc_l2_rcv_msg+0x73/0xd0 [tipc] [ 60.992174] [<ffffffff81646e66>] __netif_receive_skb_core+0x746/0x980 [ 60.992174] [<ffffffff816470c1>] __netif_receive_skb+0x21/0x70 [ 60.992174] [<ffffffff81647295>] netif_receive_skb_internal+0x35/0x130 [ 60.992174] [<ffffffff81648218>] napi_gro_receive+0x158/0x1d0 [ 60.992174] [<ffffffff81559e05>] e1000_clean_rx_irq+0x155/0x490 [ 60.992174] [<ffffffff8155c1b7>] e1000_clean+0x267/0x990 [ 60.992174] [<ffffffff81647b60>] net_rx_action+0x150/0x360 [ 60.992174] [<ffffffff8105ec43>] __do_softirq+0x123/0x360 [ 60.992174] [<ffffffff8105f12e>] irq_exit+0x8e/0xb0 [ 60.992174] [<ffffffff8179f9f5>] do_IRQ+0x65/0x110 [ 60.992174] [<ffffffff8179da6f>] ret_from_intr+0x0/0x13 [ 60.992174] [<ffffffff8100de9f>] arch_cpu_idle+0xf/0x20 [ 60.992174] [<ffffffff8109dfa6>] cpu_startup_entry+0x2f6/0x3f0 [ 60.992174] [<ffffffff81033cda>] start_secondary+0x13a/0x150 [ 60.992174] -> #0 (&(&n_ptr->lock)->rlock){+.-...}: [ 60.992174] [<ffffffff810a8f7d>] __lock_acquire+0x163d/0x1ca0 [ 60.992174] [<ffffffff810a9c0c>] lock_acquire+0x9c/0x140 [ 60.992174] [<ffffffff8179c41f>] _raw_spin_lock_bh+0x3f/0x50 [ 60.992174] [<ffffffffa0006dca>] tipc_link_retransmit+0x1aa/0x240 [tipc] [ 60.992174] [<ffffffffa0001e11>] tipc_bclink_rcv+0x611/0x640 [tipc] [ 60.992174] [<ffffffffa0008646>] tipc_rcv+0x616/0xac0 [tipc] [ 60.992174] [<ffffffffa0002ca3>] tipc_l2_rcv_msg+0x73/0xd0 [tipc] [ 60.992174] [<ffffffff81646e66>] __netif_receive_skb_core+0x746/0x980 [ 60.992174] [<ffffffff816470c1>] __netif_receive_skb+0x21/0x70 [ 60.992174] [<ffffffff81647295>] netif_receive_skb_internal+0x35/0x130 [ 60.992174] [<ffffffff81648218>] napi_gro_receive+0x158/0x1d0 [ 60.992174] [<ffffffff81559e05>] e1000_clean_rx_irq+0x155/0x490 [ 60.992174] [<ffffffff8155c1b7>] e1000_clean+0x267/0x990 [ 60.992174] [<ffffffff81647b60>] net_rx_action+0x150/0x360 [ 60.992174] [<ffffffff8105ec43>] __do_softirq+0x123/0x360 [ 60.992174] [<ffffffff8105f12e>] irq_exit+0x8e/0xb0 [ 60.992174] [<ffffffff8179f9f5>] do_IRQ+0x65/0x110 [ 60.992174] [<ffffffff8179da6f>] ret_from_intr+0x0/0x13 [ 60.992174] [<ffffffff8100de9f>] arch_cpu_idle+0xf/0x20 [ 60.992174] [<ffffffff8109dfa6>] cpu_startup_entry+0x2f6/0x3f0 [ 60.992174] [<ffffffff81033cda>] start_secondary+0x13a/0x150 [ 60.992174] [ 60.992174] other info that might help us debug this: [ 60.992174] [ 60.992174] Possible unsafe locking scenario: [ 60.992174] [ 60.992174] CPU0 CPU1 [ 60.992174] ---- ---- [ 60.992174] lock(&(&bclink->lock)->rlock); [ 60.992174] lock(&(&n_ptr->lock)->rlock); [ 60.992174] lock(&(&bclink->lock)->rlock); [ 60.992174] lock(&(&n_ptr->lock)->rlock); [ 60.992174] [ 60.992174] *** DEADLOCK *** [ 60.992174] [ 60.992174] 3 locks held by swapper/3/0: [ 60.992174] #0: (rcu_read_lock){......}, at: [<ffffffff81646791>] __netif_receive_skb_core+0x71/0x980 [ 60.992174] #1: (rcu_read_lock){......}, at: [<ffffffffa0002c35>] tipc_l2_rcv_msg+0x5/0xd0 [tipc] [ 60.992174] #2: (&(&bclink->lock)->rlock){+.-...}, at: [<ffffffffa00004be>] tipc_bclink_lock+0x8e/0xa0 [tipc] [ 60.992174] The correct the sequence of grabbing n_ptr->lock and bclink->lock should be that the former is first held and the latter is then taken, which exactly happened on CPU1. But especially when the retransmission of broadcast link is failed, bclink->lock is first held in tipc_bclink_rcv(), and n_ptr->lock is taken in link_retransmit_failure() called by tipc_link_retransmit() subsequently, which is demonstrated on CPU0. As a result, deadlock occurs. If the order of holding the two locks happening on CPU0 is reversed, the deadlock risk will be relieved. Therefore, the node lock taken in link_retransmit_failure() originally is moved to tipc_bclink_rcv() so that it's obtained before bclink lock. But the precondition of the adjustment of node lock is that responding to bclink reset event must be moved from tipc_bclink_unlock() to tipc_node_unlock(). Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29virtio: simplify the using of received in virtnet_pollLi RongQing1-2/+2
received is 0, no need to minus it and use "+=" to reassign it Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29Merge branch 'irqchip/urgent-gic' into irqchip/urgentJason Cooper2-9/+65
2015-03-29Merge branch 'be2net-next'David S. Miller2-7/+24
Sathya Perla says: ==================== be2net: patch set Hi David, this patch set includes 2 feature additions to the be2net driver: Patch 1 sets up cpu affinity hints for be2net irqs using the cpumask_set_cpu_local_first() API that first picks the near numa cores and when they are exhausted, selects the far numa cores. Patch 2 setups up xps queue mapping for be2net's TXQs to avoid, by default, TX lock contention. Patch 3 just bumps up the driver version. Pls consider applying this patch set to the net-next queue. Thanks! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29be2net: bump up the driver version to 10.6.0.1Sathya Perla1-1/+1
Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29be2net: setup xps queue mappingSathya Perla1-3/+7
This patch sets up xps queue mapping on load, so that TX traffic is steered to the queue whose irqs are being processed by the current cpu. This helps in avoiding TX lock contention. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29be2net: assign CPU affinity hints to be2net IRQsPadmanabh Ratnakar2-3/+16
This patch provides hints to irqbalance to map be2net IRQs to specific CPU cores. cpumask_set_cpu_local_first() is used, which first maps IRQs to near NUMA cores; when those cores are exhausted, IRQs are mapped to far NUMA cores. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29irqchip: gicv3-its: Use non-cacheable accesses when no shareabilityMarc Zyngier2-4/+47
If the ITS or the redistributors report their shareability as zero, then it is important to make sure they will no generate any cacheable traffic, as this is unlikely to produce the expected result. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1427465705-17126-5-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-29irqchip: gicv3-its: Fix PROP/PEND and BASE/CBASE confusionMarc Zyngier2-3/+16
The ITS driver sometime mixes up the use of GICR_PROPBASE bitfields for the GICR_PENDBASE register, and GITS_BASER for GICR_CBASE. This does not lead to any observable bug because similar bits are at the same location, but this just make the code even harder to understand... This patch provides the required #defines and fixes the mixup. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1427465705-17126-4-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-29irqchip: gicv3-its: Fix device ID encodingAndre Przywara1-1/+1
When building ITS commands which have the device ID in it, we should mask off the whole upper 32 bits of the first command word before inserting the new value in there. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1427465705-17126-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-29irqchip: gicv3-its: Fix encoding of collection's target redistributorMarc Zyngier1-1/+1
With a monolithic GICv3, redistributors are addressed using a linear number, while a distributed implementation uses physical addresses. When encoding a target address into a command, we strip the lower 16 bits, as redistributors are always 64kB aligned. This works perfectly well with a distributed implementation, but has the silly effect of always encoding target 0 in the monolithic case (unless you have more than 64k CPUs, of course). The obvious fix is to shift the linear target number by 16 when computing the target address, so that we don't loose any precious bit. Reported-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1427465705-17126-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-29Merge branch 'cxgb4'David S. Miller3-22/+101
Hariprasad Shenai says: ==================== cxgb4: Fixes ingress queue mapping and other fixes The below series fixes ingress queue mapping by allocating them dynamically to prevent stack overflow. Disable napi and interrupts before unregistering netdev to avoid crash while unloading driver when traffic is flowing. The patches series is created against 'net' tree. And includes patches on cxgb4 driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29cxgb4: Disable interrupts and napi before unregistering netdevHariprasad Shenai1-7/+18
Disable interrupts and quiesce rx before unregistering net device to avoid crash while unloading driver when traffic is flowing through. Based on original work by Shameem Khalid <shameem@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29cxgb4: Allocate dynamic mem. for egress and ingress queue mapsHariprasad Shenai3-15/+83
QIDs (egress/ingress) from firmware in FW_*_CMD.alloc command can be anywhere in the range from EQ(IQFLINT)_START to EQ(IQFLINT)_END. For eg, in the first load eqid can be from 100 to 300. In the next load it can be from 301 to 500 (assume eq_start is 100 and eq_end is 1000). The driver was assuming them to always start from EQ(IQFLINT)_START till MAX_EGRQ(INGQ). This was causing stack overflow and subsequent crash. Fixed it by dynamically allocating memory (of qsize (x_END - x_START + 1)) for these structures. Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29tcp: tcp_syn_flood_action() can be staticEric Dumazet3-31/+29
After commit 1fb6f159fd21 ("tcp: add tcp_conn_request"), tcp_syn_flood_action() is no longer used from IPv6. We can make it static, by moving it above tcp_conn_request() Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29cxgb4: fix boolreturn.cocci warningsWu Fengguang1-3/+3
drivers/net/ethernet/chelsio/cxgb4/cxgb4_fcoe.c:49:9-10: WARNING: return of 0/1 in function 'cxgb_fcoe_sof_eof_supported' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci CC: Varun Prakash <varun@chelsio.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29ipmr,ip6mr: call ip6mr_free_table() on failure pathWANG Cong2-2/+2
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29fib6: install fib6 ops in the last stepWANG Cong1-6/+3
We should not commit the new ops until we finish all the setup, otherwise we have to NULL it on failure. Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29usbnet: Fix tx_bytes statistic running backward in cdc_ncmBen Hutchings5-11/+22
cdc_ncm disagrees with usbnet about how much framing overhead should be counted in the tx_bytes statistics, and tries 'fix' this by decrementing tx_bytes on the transmit path. But statistics must never be decremented except due to roll-over; this will thoroughly confuse user-space. Also, tx_bytes is only incremented by usbnet in the completion path. Fix this by requiring drivers that set FLAG_MULTI_FRAME to set a tx_bytes delta along with the tx_packets count. Fixes: beeecd42c3b4 ("net: cdc_ncm/cdc_mbim: adding NCM protocol statistics") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Bjørn Mork <bjorn@mork.no>
2015-03-29usbnet: Fix tx_packets stat for FLAG_MULTI_FRAME driversBen Hutchings5-3/+20
Currently the usbnet core does not update the tx_packets statistic for drivers with FLAG_MULTI_PACKET and there is no hook in the TX completion path where they could do this. cdc_ncm and dependent drivers are bumping tx_packets stat on the transmit path while asix and sr9800 aren't updating it at all. Add a packet count in struct skb_data so these drivers can fill it in, initialise it to 1 for other drivers, and add the packet count to the tx_packets statistic on completion. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29Bluetooth: Remove superfluous extra empty line between functionsMarcel Holtmann1-1/+0
Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-29Bluetooth: Fix error returns for Read Local OOB Extended Data commandsMarcel Holtmann1-37/+34
The Read Local OOB Extended Data commands are required to return the address type and the data length at least. However currently the error returns only the address type. To fix this and avoid any extra allocations or stack memory, rearrange the code so that the same path can be used for error returns. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-29Bluetooth: Move memory location outside of hci_dev lockMarcel Holtmann1-8/+6
Taking the hci_dev lock for just a memory allocation seems a bit too much and not really needed. So instead try to allocate the memory first and then take the lock. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-28Bluetooth: Update adv. parameters when conn. setting changesArman Uguray1-1/+2
This patch fixes a bug where the advertising parameters weren't updated after a call to "Set Connectable" if the HCI_ADVERTISING_INSTANCE setting was set. Signed-off-by: Arman Uguray <armansito@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-28Bluetooth: Use ADV_SCAN_IND for adv. instancesArman Uguray1-1/+20
With this patch, ADV_SCAN_IND will be used for advertising instances that have non-zero scan response data while the global "connectable" setting is "off". Signed-off-by: Arman Uguray <armansito@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-28Bluetooth: Fix using global connectable settings for advArman Uguray1-4/+10
This patch fixes a bug where ADV_NONCONN_IND was being used for advertising instances >0 while the global connectable setting was set to "on". Signed-off-by: Arman Uguray <armansito@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-28Bluetooth: Fix race condition with HCI_RESET flagJohan Hedberg1-10/+10
During the HCI init phase a completed request might be the last part of the setup procedure after which the actual init procedure starts. The init procedure begins with a call to hci_reset_req() which sets the HCI_RESET flag. The purpose of this flag is to make us ignore any updates to ncmd/cmd_cnt as long as we haven't received the command complete event for the HCI_Reset. There's a potential race with this however: hci_req_cmd_complete(hdev, opcode, status); if (ev->ncmd && !test_bit(HCI_RESET, &hdev->flags)) { atomic_set(&hdev->cmd_cnt, 1); if (!skb_queue_empty(&hdev->cmd_q)) queue_work(hdev->workqueue, &hdev->cmd_work); } Since the hci_req_cmd_complete() will trigger the completion of the setup stage, it's possible that hci_reset_req() gets called before we try to read ev->ncmd and the HCI_RESET flag. Because of this the cmd_cnt would never be updated and the hci_reset_req() in practice ends up blocking itself. This patch fixes the issue by updating cmd_cnt before notifying the request completion, and then reading it again to determine whether the cmd_work should be queued or not. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-28Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-4/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Ingo Molnar: "Fix x86 syscall exit code bug that resulted in spurious non-execution of TIF-driven user-return worklets, causing big trouble for things like KVM that rely on user notifiers for correctness of their vcpu model, causing crashes like double faults" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm/entry: Check for syscall exit work with IRQs disabled
2015-03-28Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds3-9/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Two clocksource driver fixes, and an idle loop RCU warning fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/sun5i: Fix cpufreq interaction with sched_clock() clocksource/drivers: Fix various !CONFIG_HAS_IOMEM build errors timers/tick/broadcast-hrtimer: Fix suspicious RCU usage in idle loop
2015-03-28Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Ingo Molnar: "A single sched/rt corner case fix for RLIMIT_RTIME correctness" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix RLIMIT_RTTIME when PI-boosting to RT
2015-03-28Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Ingo Molnar: "A perf kernel side fix for a fuzzer triggered lockup" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix irq_work 'tail' recursion
2015-03-28Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds2-30/+59
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Ingo Molnar: "A module unload lockdep race fix" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lockdep: Fix the module unload key range freeing logic
2015-03-28Merge branch 'parisc-4.0-1' of ↵Linus Torvalds2-10/+16
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parsic fixes from Helge Deller: "One patch from Mikulas fixes a bug on parisc by artifically incrementing the counter in pmd_free when the kernel tries to free the preallocated pmd. Other than that we now prevent that syscalls gets added without incrementing __NR_Linux_syscalls and fix the initial pmd setup code if a default page size greater than 4k has been selected" * 'parisc-4.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix pmd code to depend on PT_NLEVELS value, not on CONFIG_64BIT parisc: mm: don't count preallocated pmds parisc: Add compile-time check when adding new syscalls
2015-03-28Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-4/+5
Pull kvm ppc bugfixes from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Book3S HV: Fix instruction emulation KVM: PPC: Book3S HV: Endian fix for accessing VPA yield count KVM: PPC: Book3S HV: Fix spinlock/mutex ordering issue in kvmppc_set_lpcr()
2015-03-28Merge tag 'arc-4.0-fixes-part-2' of ↵Linus Torvalds1-6/+18
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: "We found some issues with signal handling taking down the system. I know its late, but these are important and all marked for stable. ARC signal handling related fixes uncovered during recent testing of NPTL tools" * tag 'arc-4.0-fixes-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: signal handling robustify ARC: SA_SIGINFO ucontext regs off-by-one
2015-03-28Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull selinux bugfix from James Morris. Fix broken return value. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: selinux: fix sel_write_enforce broken return value
2015-03-28iio: imu: Use iio_trigger_get for indio_dev->trig assignmentDarshana Padmadas1-1/+1
This patch uses iio_trigger_get to increment the reference count of trigger device, to avoid incorrect assignment. Can result in a null pointer dereference during removal if the trigger has been changed before removal. This patch refers to a similar situation encountered through the following discussion: http://www.spinics.net/lists/linux-iio/msg13669.html Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-28iio: adc: vf610: use ADC clock within specificationStefan Agner1-30/+61
Depending on conversion mode used, the ADC clock (ADCK) needs to be below a maximum frequency. According to Vybrid's data sheet this is 20MHz for the low power conversion mode. The ADC clock is depending on input clock, which is the bus clock by default. Vybrid SoC are typically clocked at at 400MHz or 500MHz, which leads to 66MHz or 83MHz bus clock respectively. Hence, a divider of 8 is required to stay below the specified maximum clock of 20MHz. Due to the different bus clock speeds, the resulting sampling frequency is not static. Hence use the ADC clock and calculate the actual available sampling frequency dynamically. This fixes bogous values observed on some 500MHz clocked Vybrid SoC. The resulting value usually showed Bit 9 being stuck at 1, or 0, which lead to a value of +/-512. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Fugang Duan <B38611@freescale.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-28iio/adc/cc10001_adc.c: Fix !HAS_IOMEM buildRichard Weinberger1-1/+2
Fixes: drivers/built-in.o: In function `cc10001_adc_probe': cc10001_adc.c:(.text+0x412e92): undefined reference to `devm_ioremap_resource' Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-28Bluetooth: btusb: Consolidate Broadcom based device entriesMarcel Holtmann1-8/+4
For all modern Bluetooth USB devices from Broadcom it makes a lot more sense to use USB_VENDOR_AND_INTERFACE_INFO instead of manually adding USB_DEVICE for each one of them. There are already interface entries for these vendors and so just remove the duplicate device entries. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-03-28drivers/of: Add empty ranges quirk for PA-SemiBenjamin Herrenschmidt1-3/+8
The "sdc" node is missing the ranges property, it needs to be treated as having an empty one otherwise translation fails for its children. Fixes 746c9e9f92dd, "of/base: Fix PowerPC address parsing hack" Tested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Stable <stable@vger.kernel.org> # v3.18+
2015-03-28Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds2-5/+5
Pull watchdog fixes from Wim Van Sebroeck: - mtk_wdt: signedness bug in mtk_wdt_start() - imgpdc: Fix NULL pointer dereference during probe and fix the default heartbeat * git://www.linux-watchdog.org/linux-watchdog: watchdog: imgpdc: Fix default heartbeat watchdog: imgpdc: Fix probe NULL pointer dereference watchdog: mtk_wdt: signedness bug in mtk_wdt_start()
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 14:49:27 +0300