summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-03-16ARM: dts: kzm9d: Fix "debounce-interval" property misspellingGeert Uytterhoeven1-4/+4
"debounce_interval" was never supported. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12ARM: dts: gose: use demuxer for I2C4Wolfram Sang1-0/+34
Make it possible to fallback to GPIO for I2C4 on the EXIO-E connector. This is based on reference work for the I2C0 core of the lager/r8a7790 by Wolfram Sang. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> [wsa: rebased, corrected board name in subject, fixed aliases, switched to named GPIOs, fixed pinmux for I2C4] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2018-02-12ARM: dts: gose: use demuxer for I2C2Wolfram Sang1-97/+121
Create a separate bus for HDMI related I2C2 and provide fallback to GPIO. Based on work for the r8a7790/lager by Wolfram Sang. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> [wsa: rebased, corrected board name in subject, fixed aliases, switched to named GPIOs] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2018-02-12ARM: dts: silk: use demuxer for I2C1Wolfram Sang1-53/+75
Create a separate bus for HDMI related I2C1 and provide fallback to GPIO. Based on work for the r8a7790/lager by Wolfram Sang. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> [wsa: rebased, fixed aliases, switched to named GPIOs] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2018-02-12ARM: dts: alt: use demuxer for I2C1Wolfram Sang1-16/+37
Create a separate bus for HDMI related I2C1 and provide fallback to GPIO. Based on work for the r8a7790/lager by Wolfram Sang. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> [wsa: rebased, fixed aliases, switched to named GPIOs] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2018-02-12ARM: dts: porter: use demuxer for I2C2Wolfram Sang1-53/+75
Create a separate bus for HDMI related I2C2 and provide fallback to GPIO. Based on work for the r8a7790/lager by Wolfram Sang. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> [wsa: rebased, fixed aliases, switched to named GPIOs] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2018-02-12ARM: dts: koelsch: use demuxer for I2C4Wolfram Sang1-0/+34
Make it possible to fallback to GPIO for I2C4 on the EXIO-E connector. This is based on reference work for the I2C0 core of the lager/r8a7790 by Wolfram Sang. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> [wsa: rebased, fixed aliases, switched to named GPIOS, fixed pinmux for I2C4] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2018-02-12ARM: dts: koelsch: use demuxer for I2C2Wolfram Sang1-89/+111
Create a separate bus for HDMI related I2C2 and provide fallback to GPIO. Based on work for the r8a7790/lager by Wolfram Sang. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> [wsa: rebased, fixed aliases, switched to named GPIOs, sorted by SCL pins] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2018-02-12ARM: dts: lager: use demuxer for IIC3/I2C3Wolfram Sang1-31/+53
Create a separate bus for da9063 PMIC and da9210 regulator related I2C slaves. Based on similar work for HDMI by Wolfram Sang. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> [wsa: rebased, corrected chip name in commit msg, updated aliases] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2018-02-12ARM: dts: lager: use demuxer for IIC2/I2C2Wolfram Sang1-89/+124
Create a separate bus for HDMI related I2C slaves. Based on work by Wolfram Sang. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> [wsa: rebased, removed typo in comment, fixed aliases, switched to named GPIOS, sort SCL pins first] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2018-02-12ARM: dts: r8a7745: Add VSP supportBiju Das1-0/+18
Add VSP support to SoC DT. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12ARM: dts: r8a7743: Add VSP supportBiju Das1-0/+27
Add VSP support to SoC DT. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12ARM: dts: r8a7745: Add IPMMU DT nodesBiju Das1-0/+58
Add the six IPMMU instances found in the r8a7745 to DT with a disabled status. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12ARM: dts: r8a7743: Add IPMMU DT nodesBiju Das1-0/+58
Add the six IPMMU instances found in the r8a7743 to DT with a disabled status. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12ARM: dts: r8a7745: sort subnodes of soc nodeSimon Horman1-542/+538
Sort the subnodes of the soc node to improve maintainability. The sort key is the address on the bus with instances of the same IP block grouped together and sorted alphabetically. Minor whitespace and line-wrapping changes are also made to match the formatting of R-Car Gen2 SoCs. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7743: sort subnodes of soc nodeSimon Horman1-578/+575
Sort the subnodes of the soc node to improve maintainability. The sort key is the address on the bus with instances of the same IP block grouped together and sorted alphabetically. Minor whitespace and line-wrapping changes are also made to match the formatting of R-Car Gen2 SoCs. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7793: consistently use single space before =Simon Horman1-5/+5
Consistently use a single space before a =. This patch fixes instances where a tab is used instead. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7791: consistently use single space before =Simon Horman1-5/+5
Consistently use a single space before a =. This patch fixes instances where a tab is used instead. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7790: consistently use single space before =Simon Horman1-5/+5
Consistently use a single space before a =. This patch fixes instances where a tab is used instead. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7794: sort subnodes of root nodeSimon Horman1-45/+45
Sort the subnodes of the soc node to improve maintainability. The sort key is the address on the bus with instances of the same IP block grouped together. Also re-align comment of audio_clka to match other R-Car SoCs. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7794: sort subnodes of soc nodeSimon Horman1-575/+574
Sort the subnodes of the soc node to improve maintainability. The sort key is the address on the bus with instances of the same IP block grouped together. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7794: add soc nodeSimon Horman1-1153/+1205
Add soc node to represent the bus and move all nodes with a base address into this node. This is consistent with handling of R-Car Gen3, RZ/G1, and R-Car V2H (R8A77920) SoCs upstream. It is intended to migrate other R-Car Gen2 SoCs to this scheme. The ordering is derived from simply moving each node with an address up to before any nodes without a base address that occur before the soc node. To improve maintainability follow-up patches will sort subnodes of both the new soc node and the root node. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7794: consistently use single space after =Simon Horman1-19/+19
Consistently use a single space after a =. This patch removes instances where a tab is used instead. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7793: sort subnodes of root nodeSimon Horman1-45/+45
Sort the subnodes of the soc node to improve maintainability. The sort key is the address on the bus with instances of the same IP block grouped together. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7793: sort subnodes of soc nodeSimon Horman1-432/+432
Sort the subnodes of the soc node to improve maintainability. The sort key is the address on the bus with instances of the same IP block grouped together. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7793: add soc nodeSimon Horman1-1132/+1193
Add soc node to represent the bus and move all nodes with a base address into this node. This is consistent with handling of R-Car Gen3, RZ/G1, and R-Car V2H (R8A77920) SoCs upstream. It is intended to migrate other R-Car Gen2 SoCs to this scheme. The ordering is derived from simply moving each node with an address up to before any nodes without a base address that occur before the soc node. To improve maintainability follow-up patches will sort subnodes of both the new soc node and the root node. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7793: consistently use single space after =Simon Horman1-9/+10
Consistently use a single space after a =. This patch removes instances where a tab is used instead. It also avoids running over 80 columns in width in one of the lines where whitespace is updated. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7792: sort subnodes of soc nodeSimon Horman1-249/+249
Sort the subnodes of the soc node to improve maintainability. The sort key is the address on the bus with instances of the same IP block grouped together. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7791: sort subnodes of root nodeSimon Horman1-67/+67
Sort subnodes of root node to aid maintenance. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7791: add soc nodeSimon Horman1-1420/+1489
Add soc node to represent the bus and move all nodes with a base address into this node. This is consistent with handling of R-Car Gen3, RZ/G1, and R-Car V2H (R8A77920) SoCs upstream. It is intended to migrate other R-Car Gen2 SoCs to this scheme. The ordering is derived from simply moving each node with an address up to before any nodes without a base address that occur before the soc node. To improve maintainability follow-up patches will sort subnodes of both the new soc node and the root node. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7791: consistently use single space after =Simon Horman1-37/+38
Consistently use a single space after a =. This patch removes instances where a tab or multiple spaces are used instead. It also avoids running over 80 columns in width in one of the lines where whitespace is updated. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7790: sort subnodes of root nodeSimon Horman1-52/+52
Sort subnodes of root node to aid maintenance. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7790: sort subnodes of soc nodeSimon Horman1-733/+733
Sort the subnodes of the soc node to improve maintainability. The sort key is the addresss on the bus with instances of the same IP block grouped together. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7790: add soc nodeSimon Horman1-1362/+1432
Add soc node to represent the bus and move all nodes with a base address into this node. This is consistent with handling of R-Car Gen3, RZ/G1, and R-Car V2H (R8A77920) SoCs upstream. It is intended to migrate other R-Car Gen2 SoCs to this scheme. The ordering is derived from simply moving each node with an address up to before any nodes without a base address that occur before the soc node. To improve maintainability follow-up patches will sort subnodes of both the new soc node and the root node. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: r8a7790: consistently use single space after =Simon Horman1-37/+38
Consistently use a single space after a =. This patch removes instances where a tab or multiple spaces are used instead. It also avoids running over 80 columns in width in one of the lines where whitespace is updated. This patch should not introduce any functional change. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12ARM: dts: porter: Fix HDMI output routingLaurent Pinchart1-1/+1
The HDMI encoder is connected to the RGB output of the DU, which is port@0, not port@1. Fix the incorrect DT description. Fixes: c5af8a4248d3 ("ARM: dts: porter: add DU DT support") Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12ARM: dts: iwg22m: Enable cmt0Fabrizio Castro1-0/+4
This patch enables cmt0 support from within the iwg22m SoM dtsi. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12ARM: dts: iwg20m: Enable cmt0Fabrizio Castro1-0/+4
This patch enables cmt0 support from within the iwg20m SoM dtsi. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12ARM: dts: lager: Add CEC clock for HDMI transmitterNiklas Söderlund1-0/+8
The adv7511 on the Lager board has a 12 MHz fixed clock for the CEC block. Specify this in the dts to enable CEC support. Based on a similar patch for Koelsch by Hans Verkuil. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12ARM: dts: r8a7793: Reduce size of thermal registersSimon Horman1-1/+1
Reduce size of thermal registers in DT for r8a7793 (R-Car M3-N) SoC. According to the "User's Manual: Hardware" v2.00 the registers at base 0xe61f0000 extend to an offset of 0x10, rather than 0x14 which is the case on the r8a73a4 (R-Mobile APE6). This should not have any runtime affect as mapping granularity is PAGE_SIZE. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12ARM: dts: r8a7791: Reduce size of thermal registersSimon Horman1-1/+1
Reduce size of thermal registers in DT for r8a7791 (R-Car M3-W) SoC. According to the "User's Manual: Hardware" v2.00 the registers at base 0xe61f0000 extend to an offset of 0x10, rather than 0x14 which is the case on the r8a73a4 (R-Mobile APE6). This should not have any runtime affect as mapping granularity is PAGE_SIZE. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12ARM: dts: r8a7790: Reduce size of thermal registersSimon Horman1-1/+1
Reduce size of thermal registers in DT for r8a7790 (R-Car H2) SoC. According to the "User's Manual: Hardware" v2.00 the registers at base 0xe61f0000 extend to an offset of 0x10, rather than 0x14 which is the case on the r8a73a4 (R-Mobile APE6). This should not have any runtime affect as mapping granularity is PAGE_SIZE. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12Linux 4.16-rc1Linus Torvalds1-2/+2
2018-02-12unify {de,}mangle_poll(), get rid of kernel-side POLL...Al Viro8-142/+47
except, again, POLLFREE and POLL_BUSY_LOOP. With this, we finally get to the promised end result: - POLL{IN,OUT,...} are plain integers and *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-12vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds297-913/+913
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-12Merge branch 'work.poll2' of ↵Linus Torvalds8-40/+47
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more poll annotation updates from Al Viro: "This is preparation to solving the problems you've mentioned in the original poll series. After this series, the kernel is ready for running for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done as a for bulk search-and-replace. After that, the kernel is ready to apply the patch to unify {de,}mangle_poll(), and then get rid of kernel-side POLL... uses entirely, and we should be all done with that stuff. Basically, that's what you suggested wrt KPOLL..., except that we can use EPOLL... instead - they already are arch-independent (and equal to what is currently kernel-side POLL...). After the preparations (in this series) switch to returning EPOLL... from ->poll() instances is completely mechanical and kernel-side POLL... can go away. The last step (killing kernel-side POLL... and unifying {de,}mangle_poll() has to be done after the search-and-replace job, since we need userland-side POLL... for unified {de,}mangle_poll(), thus the cherry-pick at the last step. After that we will have: - POLL{IN,OUT,...} *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly)" * 'work.poll2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: annotate ep_scan_ready_list() ep_send_events_proc(): return result via esed->res preparation to switching ->poll() to returning EPOLL... add EPOLLNVAL, annotate EPOLL... and event_poll->event use linux/poll.h instead of asm/poll.h xen: fix poll misannotation smc: missing poll annotations
2018-02-12Merge tag 'xtensa-20180211' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds1-0/+2
Pull xtense fix from Max Filippov: "Build fix for xtensa architecture with KASAN enabled" * tag 'xtensa-20180211' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix build with KASAN
2018-02-12Merge tag 'nios2-v4.16-rc1' of ↵Linus Torvalds3-10/+8
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2 Pull nios2 update from Ley Foon Tan: - clean up old Kconfig options from defconfig - remove leading 0x and 0s from bindings notation in dts files * tag 'nios2-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: defconfig: Cleanup from old Kconfig options nios2: dts: Remove leading 0x and 0s from bindings notation
2018-02-11xtensa: fix build with KASANMax Filippov1-0/+2
The commit 917538e212a2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage") removed KASAN_SHADOW_SCALE_SHIFT definition from include/linux/kasan.h and added it to architecture-specific headers, except for xtensa. This broke the xtensa build with KASAN enabled. Define KASAN_SHADOW_SCALE_SHIFT in arch/xtensa/include/asm/kasan.h Reported by: kbuild test robot <fengguang.wu@intel.com> Fixes: 917538e212a2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage") Acked-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-02-11nios2: defconfig: Cleanup from old Kconfig optionsKrzysztof Kozlowski2-2/+0
Remove old, dead Kconfig option INET_LRO. It is gone since commit 7bbf3cae65b6 ("ipv4: Remove inet_lro library"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-25 05:54:27 +0300