summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-05-02net: bcmgenet: Move wake-up event out of side band ISRDoug Berger3-13/+67
The side band interrupt service routine is not available on chips like 7211, or rather, it does not permit the signaling of wake-up events due to the complex interrupt hierarchy. Move the wake-up event accounting into a .resume_noirq function, account for possible wake-up events and clear the MPD/HFB interrupts from there, while leaving the hardware untouched until the resume function proceeds with doing its usual business. Because bcmgenet_wol_power_down_cfg() now enables the MPD and HFB interrupts, it is invoked by a .suspend_noirq function to prevent the servicing of interrupts after the clocks have been disabled. Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02Merge branch 'net-ipa-dont-cache-channel-state'David S. Miller2-38/+59
Alex Elder says: ==================== net: ipa: don't cache channel state This series removes a field that holds a copy of a channel's state at the time it was last fetched. In principle the state can change at any time, so it's better to just fetch it whenever needed. The first patch is just preparatory, simplifying the arguments to gsi_channel_state(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02net: ipa: do not cache channel stateAlex Elder2-35/+55
It is possible for a GSI channel's state to be changed as a result of an action by a different execution environment. Specifically, the modem is able to issue a GSI generic command that causes a state change on a GSI channel associated with the AP. A channel's state only needs to be known when a channel is allocated or deallocaed, started or stopped, or reset. So there is little value in caching the state anyway. Stop recording a copy of the channel's last known state, and instead fetch the true state from hardware whenever it's needed. In such cases, *do* record the state in a local variable, in case an error message reports it (so the value reported is the value seen). Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02net: ipa: pass channel pointer to gsi_channel_state()Alex Elder1-5/+6
Pass a channel pointer rather than a GSI pointer and channel ID to gsi_channel_state(). Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02Merge branch 'net-dsa-mv88e6xxx-augment-phylink-support-for-10G'David S. Miller2-13/+49
Russell King says: ==================== net: dsa: mv88e6xxx: augment phylink support for 10G This series adds phylink 10G support for the 88E6390 series switches, as suggested by Andrew Lunn. The first patch cleans up the code to use generic definitions for the registers in a similar way to what was done with the initial conversion of 1G serdes support. The second patch adds the necessary bits 10GBASE mode to the pcs_get_state() method. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02net: dsa: mv88e6xxx: 88e6390 10G serdes supportRussell King2-2/+42
Add support for reading and reporting the 10G link status on the 88e6390 in addition to the 1000BASE-X/2500BASE-X/SGMII status. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02net: dsa: mv88e6xxx: use generic clause 45 definitionsRussell King2-11/+7
The private MV88E6390_PCS_CONTROL_1 definitions in serdes.h reflects the IEEE 802.3 standard PCS control register 1 definitions, only offset by 0x1000 in the PHYXS register space. Rather than inventing our own, use those that already exist, and name the register MV88E6390_10G_CTRL1. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02Merge branch 'net-atlantic-A2-support'David S. Miller23-121/+2798
Igor Russkikh says: ==================== net: atlantic: A2 support This patchset adds support for the new generation of Atlantic NICs. Chip generations are mostly compatible register-wise, but there are still some differences. Therefore we've made some of first generation (A1) code non-static to re-use it where possible. Some pieces are A2 specific, in which case we redefine/extend such APIs. v2: * removed #pragma pack (2 structures require the packed attribute); * use defines instead of magic numbers where possible; v1: https://patchwork.ozlabs.org/cover/1276220/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02net: atlantic: A2 ingress / egress hw configurationIgor Russkikh7-105/+172
Chip generations are mostly compatible register-wise, but there are still some differences. Therefore we've made some of first generation (A1) code non-static to re-use it where possible. Some pieces are A2 specific, in which case we redefine/extend such APIs. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02net: atlantic: basic A2 init/deinit hw_opsIgor Russkikh7-79/+362
This patch adds basic A2 HW initialization / deinitialization. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Co-developed-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02net: atlantic: common functions needed for basic A2 init/deinit hw_opsDmitry Bogdanov6-2/+163
This patch adds common functions (mostly FW-related), which are needed for basic A2 HW initialization / deinitialization. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Co-developed-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02net: atlantic: HW bindings for basic A2 init/deinit hw_opsDmitry Bogdanov3-0/+207
This patch adds A2 register definitions for basic A2 HW initialization / deinitialization. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Co-developed-by: Egor Pomozov <epomozov@marvell.com> Signed-off-by: Egor Pomozov <epomozov@marvell.com> Co-developed-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Co-developed-by: Nikita Danilov <ndanilov@marvell.com> Signed-off-by: Nikita Danilov <ndanilov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02net: atlantic: add A2 RPF hw_opsIgor Russkikh3-0/+259
This patch adds RPF-related hw_ops, which are needed for basic functionality. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Co-developed-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02net: atlantic: HW bindings for A2 RFPIgor Russkikh5-0/+284
RPF is one of the modules which has been significantly changed/extended on A2. This patch adds the necessary A2 register definitions for RPF, which are used in follow-up patches. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Co-developed-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02net: atlantic: A2 hw_ops skeletonIgor Russkikh6-7/+294
This patch adds basic hw_ops layout for A2. Actual implementation will be added in the follow-up patches. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02net: atlantic: minimal A2 fw_opsDmitry Bogdanov4-0/+352
This patch adds the minimum set of FW ops for A2. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Co-developed-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02net: atlantic: minimal A2 HW bindings required for fw_opsDmitry Bogdanov5-0/+137
This patch adds the bare minimum of A2 HW bindings required to get fw_ops working. Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02net: atlantic: A2 driver-firmware interfaceDmitry Bogdanov1-0/+593
This patch adds the driver<->firmware interface for A2 Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02net: atlantic: move IS_CHIP_FEATURE to aq_hw.hMark Starovoytov5-32/+36
IS_CHIP feature will be used to differentiate between A1 and A2, where necessary. Thus, move it to aq_hw.h, rename it and make it accept the 'hw' pointer. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02net: atlantic: make hw_get_regs optionalMark Starovoytov1-0/+6
This patch fixes potential crash in case if hw_get_regs is NULL. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02net: atlantic: simplify hw_get_fw_version() usageNikita Danilov4-12/+6
hw_get_fw_version() never fails, so this patch simplifies its usage by utilizing return value instead of output argument. Signed-off-by: Nikita Danilov <ndanilov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02net: atlantic: add hw_soft_reset, hw_prepare to hw_opsMark Starovoytov5-5/+24
A2 will have a different implementation of these 2 APIs, so this patch moves them to hw_ops in preparation for A2. Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Co-developed-by: Dmitry Bezrukov <dbezrukov@marvell.com> Signed-off-by: Dmitry Bezrukov <dbezrukov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02net: atlantic: add defines for 10M and EEE 100M link modeIgor Russkikh3-10/+27
This patch adds defines for 10M and EEE 100M link modes, which are supported by A2. 10M support is added in this patch series. EEE is out of scope, but will be added in a follow-up series. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02net: atlantic: add A2 device IDsIgor Russkikh1-0/+7
Adding device ids for the new generation of atlantic nic. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02net: atlantic: update company name in the driver descriptionIgor Russkikh2-3/+3
Aquantia is now part of Marvell. Thus, update the driver description. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02drivers: net: davinci_mdio: fix potential NULL dereference in ↵Wei Yongjun1-0/+2
davinci_mdio_probe() platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference since devm_ioremap() does not check input parameters for null. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = \(platform_get_resource\|platform_get_resource_byname\)(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Fixes: 03f66f067560 ("net: ethernet: ti: davinci_mdio: use devm_ioremap()") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02net: fix skb_panic to output real addressJesper Dangaard Brouer1-1/+1
In skb_panic() the real pointer values are really needed to diagnose issues, e.g. data and head are related (to calculate headroom). The hashed versions of the addresses doesn't make much sense here. The patch use the printk specifier %px to print the actual address. The printk documentation on %px: https://www.kernel.org/doc/html/latest/core-api/printk-formats.html#unmodified-addresses Fixes: ad67b74d2469 ("printk: hash addresses printed with %p") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02net: ethernet: stmmac: simplify phy modes management for stm32Christophe Roullier1-30/+44
No new feature, just to simplify stm32 part to be easier to use. Add by default all Ethernet clocks in DT, and activate or not in function of phy mode, clock frequency, if property "st,ext-phyclk" is set or not. Keep backward compatibility -------------------------------------------------------------------------- |PHY_MODE | Normal | PHY wo crystal| PHY wo crystal | No 125Mhz | | | | 25MHz | 50MHz | from PHY | -------------------------------------------------------------------------- | MII | - | eth-ck | n/a | n/a | | | | st,ext-phyclk | | | -------------------------------------------------------------------------- | GMII | - | eth-ck | n/a | n/a | | | | st,ext-phyclk | | | -------------------------------------------------------------------------- | RGMII | - | eth-ck | n/a | eth-ck | | | | st,ext-phyclk | |st,eth-clk-sel| | | | | | or | | | | | | st,ext-phyclk| ----------------==-------------------------------------------------------- | RMII | - | eth-ck | eth-ck | n/a | | | | st,ext-phyclk | st,eth-ref-clk-sel | | | | | | or st,ext-phyclk | | -------------------------------------------------------------------------- Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-02bpf: Fix use-after-free of bpf_link when priming half-failsAndrii Nakryiko1-6/+7
If bpf_link_prime() succeeds to allocate new anon file, but then fails to allocate ID for it, link priming is considered to be failed and user is supposed ot be able to directly kfree() bpf_link, because it was never exposed to user-space. But at that point file already keeps a pointer to bpf_link and will eventually call bpf_link_release(), so if bpf_link was kfree()'d by caller, that would lead to use-after-free. Fix this by first allocating ID and only then allocating file. Adding ID to link_idr is ok, because link at that point still doesn't have its ID set, so no user-space process can create a new FD for it. Fixes: a3b80e107894 ("bpf: Allocate ID for bpf_link") Reported-by: syzbot+39b64425f91b5aab714d@syzkaller.appspotmail.com Suggested-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200501185622.3088964-1-andriin@fb.com
2020-05-02net: Replace the limit of TCP_LINGER2 with TCP_FIN_TIMEOUT_MAXCambda Zhu2-2/+3
This patch changes the behavior of TCP_LINGER2 about its limit. The sysctl_tcp_fin_timeout used to be the limit of TCP_LINGER2 but now it's only the default value. A new macro named TCP_FIN_TIMEOUT_MAX is added as the limit of TCP_LINGER2, which is 2 minutes. Since TCP_LINGER2 used sysctl_tcp_fin_timeout as the default value and the limit in the past, the system administrator cannot set the default value for most of sockets and let some sockets have a greater timeout. It might be a mistake that let the sysctl to be the limit of the TCP_LINGER2. Maybe we can add a new sysctl to set the max of TCP_LINGER2, but FIN-WAIT-2 timeout is usually no need to be too long and 2 minutes are legal considering TCP specs. Changes in v3: - Remove the new socket option and change the TCP_LINGER2 behavior so that the timeout can be set to value between sysctl_tcp_fin_timeout and 2 minutes. Changes in v2: - Add int overflow check for the new socket option. Changes in v1: - Add a new socket option to set timeout greater than sysctl_tcp_fin_timeout. Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01Merge branch 'r8169-improve-user-message-handling'David S. Miller1-76/+36
Heiner Kallweit says: ==================== r8169: improve user message handling Series improves few aspects of handling messages to users. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01r8169: switch from netif_xxx message functions to netdev_xxxHeiner Kallweit1-46/+22
Considering the few messages we have in the driver, there's not really a benefit in being able to control them on a message type level. Therefore simplify the code and switch to the netdev_xxx message functions. In addition add net_ratelimit() to messages that can be printed from a hot path. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01r8169: remove "out of memory" error message from rtl_request_firmwareHeiner Kallweit1-3/+1
When preparing an unrelated change, checkpatch complained about this redundant out-of-memory message. Therefore remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01r8169: simplify counter handlingHeiner Kallweit1-25/+13
The counter handling functions can only fail if rtl8169_do_counters() times out. In the poll function we emit an error message in case of timeout, therefore we don't have to propagate the timeout all the way up just to print another message basically saying the same. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01r8169: remove redundant driver message when entering promiscuous modeHeiner Kallweit1-2/+0
Net core - __dev_set_promiscuity - prints a message already when promiscuous mode in entered/left, therefore we don't have to do this in the driver too. Also the driver message would be misleading (would be because "link" message level is disabled per default) because it would print "promisc mode enabled" even if it's being left. Reason is that __dev_change_flags() calls dev_set_rx_mode() before touching the promisc flag. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01bpf: Bpf_{g,s}etsockopt for struct bpf_sock_addrStanislav Fomichev5-27/+166
Currently, bpf_getsockopt and bpf_setsockopt helpers operate on the 'struct bpf_sock_ops' context in BPF_PROG_TYPE_SOCK_OPS program. Let's generalize them and make them available for 'struct bpf_sock_addr'. That way, in the future, we can allow those helpers in more places. As an example, let's expose those 'struct bpf_sock_addr' based helpers to BPF_CGROUP_INET{4,6}_CONNECT hooks. That way we can override CC before the connection is made. v3: * Expose custom helpers for bpf_sock_addr context instead of doing generic bpf_sock argument (as suggested by Daniel). Even with try_socket_lock that doesn't sleep we have a problem where context sk is already locked and socket lock is non-nestable. v2: * s/BPF_PROG_TYPE_CGROUP_SOCKOPT/BPF_PROG_TYPE_SOCK_OPS/ Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200430233152.199403-1-sdf@google.com
2020-05-01Merge branch 'net-ReST-part-three'David S. Miller61-3360/+4193
Mauro Carvalho Chehab says: ==================== net: manually convert files to ReST format - part 3 (final) That's the third part (and the final one) of my work to convert the networking text files into ReST. it is based on linux-next next-20200430 branch. The full series (including those ones) are at: https://git.linuxtv.org/mchehab/experimental.git/log/?h=net-docs The built output documents, on html format is at: https://www.infradead.org/~mchehab/kernel_docs/networking/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01docs: networking: arcnet-hardware.rst: don't duplicate chapter namesMauro Carvalho Chehab1-4/+4
Since changeset 58ad30cf91f0 ("docs: fix reference to core-api/namespaces.rst"), auto-references for chapters are generated. This is a nice feature, but has a drawback: no chapters can have the same sumber. So, we need to change two chapter titles, to avoid warnings when building the docs. Fixes: 58ad30cf91f0 ("docs: fix reference to core-api/namespaces.rst") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01net: docs: add page_pool.rst to index.rstMauro Carvalho Chehab1-0/+1
This file is already in ReST format. Add it to the net index.rst, in order to make it part of the documentation body. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01docs: networking: device drivers: convert toshiba/spider_net.txt to ReSTMauro Carvalho Chehab3-32/+31
- add SPDX header; - adjust title markup; - mark code blocks and literals as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01docs: networking: device drivers: convert ti/tlan.txt to ReSTMauro Carvalho Chehab5-28/+52
- add SPDX header; - adjust titles and chapters, adding proper markups; - mark tables as such; - mark code blocks and literals as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01docs: networking: device drivers: convert ti/cpsw.txt to ReSTMauro Carvalho Chehab3-541/+588
- add SPDX header; - adjust titles and chapters, adding proper markups; - mark code blocks and literals as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01docs: networking: device drivers: convert ti/cpsw_switchdev.txt to ReSTMauro Carvalho Chehab2-105/+139
- add SPDX header; - adjust titles and chapters, adding proper markups; - use :field: markup; - mark code blocks and literals as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01docs: networking: device drivers: convert smsc/smc9.txt to ReSTMauro Carvalho Chehab4-44/+51
- add SPDX header; - mark code blocks and literals as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01docs: networking: device drivers: convert sb1000.txt to ReSTMauro Carvalho Chehab4-208/+224
- add SPDX header; - add a document title; - adjust titles and chapters, adding proper markups; - mark code blocks and literals as such; - mark lists as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01docs: networking: device drivers: convert qualcomm/rmnet.txt to ReSTMauro Carvalho Chehab3-16/+30
- add SPDX header; - add a document title; - mark code blocks and literals as such; - mark tables as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01docs: networking: device drivers: convert neterion/vxge.txt to ReSTMauro Carvalho Chehab4-21/+44
- add SPDX header; - adjust titles and chapters, adding proper markups; - comment out text-only TOC from html/pdf output; - mark code blocks and literals as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01docs: networking: device drivers: convert neterion/s2io.txt to ReSTMauro Carvalho Chehab5-143/+199
- add SPDX header; - add a document title; - comment out text-only TOC from html/pdf output; - mark code blocks and literals as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01docs: networking: device drivers: convert microsoft/netvsc.txt to ReSTMauro Carvalho Chehab3-24/+36
- add SPDX header; - adjust titles and chapters, adding proper markups; - mark code blocks and literals as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01docs: networking: device drivers: convert intel/ipw2200.txt to ReSTMauro Carvalho Chehab4-182/+237
- add SPDX header; - adjust titles and chapters, adding proper markups; - comment out text-only TOC from html/pdf output; - use copyright symbol; - use :field: markup; - mark code blocks and literals as such; - mark tables as such; - adjust identation, whitespaces and blank lines where needed; - add to networking/index.rst. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-25 16:04:04 +0300