summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-04-18ALSA: hda/realtek: Add quirks for Huawei Matebook D14 NBLB-WAX9NMauro Carvalho Chehab1-0/+1
The headset mic requires a fixup to be properly detected/used. As a reference, this specific model from 2021 reports the following devices: https://alsa-project.org/db/?f=1a5ddeb0b151db8fe051407f5bb1c075b7dd3e4a Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: <stable@vger.kernel.org> Message-ID: <b92a9e49fb504eec8416bcc6882a52de89450102.1713370457.git.mchehab@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-04-18USB: serial: option: add Rolling RW101-GL and RW135-GL supportVanillan Wang1-0/+8
Update the USB serial option driver support for the Rolling LTE modules. - VID:PID 33f8:01a2, RW101-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x01a2: mbim, diag, at, pipe - VID:PID 33f8:01a3, RW101-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x01a3: mbim, pipe - VID:PID 33f8:01a4, RW101-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x01a4: mbim, diag, at, pipe - VID:PID 33f8:0104, RW101-GL for laptop debug M.2 cards(with RMNET interface for /Linux/Chrome OS) 0x0104: RMNET, diag, at, pipe - VID:PID 33f8:0115, RW135-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x0115: MBIM, diag, at, pipe Here are the outputs of usb-devices: T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=01a2 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=01a3 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=01a4 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=33f8 ProdID=0104 Rev=05.04 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=ba2eb033 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=0115 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Vanillan Wang <vanillanwang@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-04-18USB: serial: option: add Lonsung U8300/U9300 productCoia Prant1-0/+4
Update the USB serial option driver to support Longsung U8300/U9300. For U8300 Interface 4 is used by for QMI interface in stock firmware of U8300, the router which uses U8300 modem. Interface 5 is used by for ADB interface in stock firmware of U8300, the router which uses U8300 modem. Interface mapping is: 0: unknown (Debug), 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI, 5: ADB T: Bus=05 Lev=01 Prnt=03 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b05 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms For U9300 Interface 1 is used by for ADB interface in stock firmware of U9300, the router which uses U9300 modem. Interface 4 is used by for QMI interface in stock firmware of U9300, the router which uses U9300 modem. Interface mapping is: 0: ADB, 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI Note: Interface 3 of some models of the U9300 series can send AT commands. T: Bus=05 Lev=01 Prnt=05 Port=04 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b3c Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms Tested successfully using Modem Manager on U9300. Tested successfully AT commands using If=1, If=2 and If=3 on U9300. Signed-off-by: Coia Prant <coiaprant@gmail.com> Reviewed-by: Lars Melin <larsm17@gmail.com> [ johan: drop product defines, trim commit message ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-04-18ALSA: hda/realtek: Fix volumn control of ThinkBook 16P Gen4Huayu Zhang1-2/+2
change HDA & AMP configuration from ALC287_FIXUP_CS35L41_I2C_2 to ALC287_FIXUP_MG_RTKC_CSAMP_CS35L41_I2C_THINKPAD for ThinkBook 16P Gen4 models to fix volumn control issue (cannot fully mute). Signed-off-by: Huayu Zhang <zhanghuayu1233@qq.com> Fixes: 6214e24cae9b ("ALSA: hda/realtek: Add quirks for Lenovo Thinkbook 16P laptops") Message-ID: <tencent_37EB880C5E5BD99D21C16B288115C4545F06@qq.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-04-18ALSA: hda/realtek: Fixes for Asus GU605M and GA403U soundVitalii Torshyn1-2/+38
Added the correct pin table for Asus GU605M and GA403U, enabling all speakers to be controlled with the master. Updated quirks for GU605M and GA403U by including the pin table patch in the chain. Co-developed-by: Luke D. Jones <luke@ljones.dev> Signed-off-by: Luke D. Jones <luke@ljones.dev> Signed-off-by: Vitalii Torshyn <vitaly.torshyn@gmail.com> Message-ID: <20240411125803.18539-1-vitaly.torshyn@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-04-18ALSA: hda/tas2781: Add new vendor_id and subsystem_id to support ThinkPad ICE-1Shenghao Ding1-0/+1
Add new vendor_id and subsystem_id to support new Lenovo laptop ThinkPad ICE-1 Signed-off-by: Shenghao Ding <shenghao-ding@ti.com> Cc: <stable@vger.kernel.org> Message-ID: <20240411091823.1644-1-shenghao-ding@ti.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-04-18net: ethernet: mtk_eth_soc: fix WED + wifi resetFelix Fietkau1-5/+1
The WLAN + WED reset sequence relies on being able to receive interrupts from the card, in order to synchronize individual steps with the firmware. When WED is stopped, leave interrupts running and rely on the driver turning off unwanted ones. WED DMA also needs to be disabled before resetting. Fixes: f78cd9c783e0 ("net: ethernet: mtk_wed: update mtk_wed_stop") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20240416082330.82564-1-nbd@nbd.name Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-18net:usb:qmi_wwan: support Rolling modulesVanillan Wang1-0/+1
Update the qmi_wwan driver support for the Rolling LTE modules. - VID:PID 33f8:0104, RW101-GL for laptop debug M.2 cards(with RMNET interface for /Linux/Chrome OS) 0x0104: RMNET, diag, at, pipe Here are the outputs of usb-devices: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=33f8 ProdID=0104 Rev=05.04 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=ba2eb033 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Vanillan Wang <vanillanwang@163.com> Link: https://lore.kernel.org/r/20240416120713.24777-1-vanillanwang@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-18Merge branch '100GbE' of ↵Jakub Kicinski1-2/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-04-16 (ice) This series contains updates to ice driver only. Michal fixes a couple of issues with TC filter parsing; always add match for src_vsi and remove flag check that could prevent addition of valid filters. Marcin adds additional checks for unsupported flower filters. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix checking for unsupported keys on non-tunnel device ice: tc: allow zero flags in parsing tc flower ice: tc: check src_vsi in case of traffic from VF ==================== Link: https://lore.kernel.org/r/20240416202409.2008383-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-18selftests: kselftest_harness: fix Clang warning about zero-length formatJakub Kicinski2-5/+7
Apparently it's more legal to pass the format as NULL, than it is to use an empty string. Clang complains about empty formats: ./../kselftest_harness.h:1207:30: warning: format string is empty [-Wformat-zero-length] 1207 | diagnostic ? "%s" : "", diagnostic); | ^~ 1 warning generated. Reported-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/all/20240409224256.1581292-1-seanjc@google.com Fixes: 378193eff339 ("selftests: kselftest_harness: let PASS / FAIL provide diagnostic") Tested-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Link: https://lore.kernel.org/r/20240416151048.1682352-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-18tcp_metrics: use parallel_ops for tcp_metrics_nl_familyEric Dumazet1-0/+1
TCP_METRICS_CMD_GET and TCP_METRICS_CMD_DEL use their own locking (tcp_metrics_lock and RCU), they do not need genl_mutex protection. Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240416162025.1251547-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-18tcp_metrics: fix tcp_metrics_nl_dump() return valueEric Dumazet1-2/+4
Change tcp_metrics_nl_dump() to return 0 at the end of a dump so that NLMSG_DONE can be appended to the current skb, saving one recvmsg() system call. Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240416161112.1199265-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-18netns: no longer hold RTNL in rtnl_net_dumpid()Eric Dumazet1-2/+3
- rtnl_net_dumpid() is already fully RCU protected, RTNL is not needed there. - Fix return value at the end of a dump, so that NLMSG_DONE can be appended to current skb, saving one recvmsg() system call. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/20240416140739.967941-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-18net: dsa: xrs700x: provide own phylink MAC operationsRussell King (Oracle)1-4/+21
Convert xrs700x to provide its own phylink MAC operations, thus avoiding the shim layer in DSA's port.c. We need to provide stubs for the mac_link_down() and mac_config() methods which are mandatory. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1rwfu8-007531-TG@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-18net: dsa: rzn1_a5psw: provide own phylink MAC operationsRussell King (Oracle)1-16/+31
Convert rzn1_a5psw to provide its own phylink MAC operations, thus avoiding the shim layer in DSA's port.c. We need to provide a stub for the mac_config() method which is mandatory. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1rwfuJ-00753D-6d@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-18net: dsa: lan9303: provide own phylink MAC operationsRussell King (Oracle)1-5/+26
Convert lan9303 to provide its own phylink MAC operations, thus avoiding the shim layer in DSA's port.c. We need to provide stubs for the mac_link_down() and mac_config() methods which are mandatory. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1rwfuE-007537-1u@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-18net: dsa: bcm_sf2: provide own phylink MAC operationsRussell King (Oracle)1-17/+32
Convert bcm_sf2 to provide its own phylink MAC operations, thus avoiding the shim layer in DSA's port.c Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/E1rwfu3-00752s-On@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-18selftests: openvswitch: Fix escape chars in regexp.Adrian Moreno1-8/+8
Character sequences starting with `\` are interpreted by python as escaped Unicode characters. However, they have other meaning in regular expressions (e.g: "\d"). It seems Python >= 3.12 starts emitting a SyntaxWarning when these escaped sequences are not recognized as valid Unicode characters. An example of these warnings: tools/testing/selftests/net/openvswitch/ovs-dpctl.py:505: SyntaxWarning: invalid escape sequence '\d' Fix all the warnings by flagging literals as raw strings. Signed-off-by: Adrian Moreno <amorenoz@redhat.com> Reviewed-by: Aaron Conole <aconole@redhat.com> Link: https://lore.kernel.org/r/20240416090913.2028475-1-amorenoz@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-18Merge tag 'for-6.9-rc4-tag' of ↵Linus Torvalds2-15/+14
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - fixup in zoned mode for out-of-order writes of metadata that are no longer necessary, this used to be tracked in a separate list but now the old locaion needs to be zeroed out, also add assertions - fix bulk page allocation retry, this may stall after first failure for compression read/write * tag 'for-6.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: do not wait for short bulk allocation btrfs: zoned: add ASSERT and WARN for EXTENT_BUFFER_ZONED_ZEROOUT handling btrfs: zoned: do not flag ZEROOUT on non-dirty extent buffer
2024-04-18net: netdevsim: select PAGE_POOL in KconfigJakub Kicinski1-0/+1
build bot points out that I forgot to add the PAGE_POOL config dependency when adding the support in netdevsim. Fixes: 1580cbcbfe77 ("net: netdevsim: add some fake page pool use") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404170348.thxrboF1-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202404170527.LIAPSyMB-lkp@intel.com/ Link: https://lore.kernel.org/r/20240416232137.2022058-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-18net/sched: Fix mirred deadlock on device recursionEric Dumazet3-0/+8
When the mirred action is used on a classful egress qdisc and a packet is mirrored or redirected to self we hit a qdisc lock deadlock. See trace below. [..... other info removed for brevity....] [ 82.890906] [ 82.890906] ============================================ [ 82.890906] WARNING: possible recursive locking detected [ 82.890906] 6.8.0-05205-g77fadd89fe2d-dirty #213 Tainted: G W [ 82.890906] -------------------------------------------- [ 82.890906] ping/418 is trying to acquire lock: [ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at: __dev_queue_xmit+0x1778/0x3550 [ 82.890906] [ 82.890906] but task is already holding lock: [ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at: __dev_queue_xmit+0x1778/0x3550 [ 82.890906] [ 82.890906] other info that might help us debug this: [ 82.890906] Possible unsafe locking scenario: [ 82.890906] [ 82.890906] CPU0 [ 82.890906] ---- [ 82.890906] lock(&sch->q.lock); [ 82.890906] lock(&sch->q.lock); [ 82.890906] [ 82.890906] *** DEADLOCK *** [ 82.890906] [..... other info removed for brevity....] Example setup (eth0->eth0) to recreate tc qdisc add dev eth0 root handle 1: htb default 30 tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \ action mirred egress redirect dev eth0 Another example(eth0->eth1->eth0) to recreate tc qdisc add dev eth0 root handle 1: htb default 30 tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \ action mirred egress redirect dev eth1 tc qdisc add dev eth1 root handle 1: htb default 30 tc filter add dev eth1 handle 1: protocol ip prio 2 matchall \ action mirred egress redirect dev eth0 We fix this by adding an owner field (CPU id) to struct Qdisc set after root qdisc is entered. When the softirq enters it a second time, if the qdisc owner is the same CPU, the packet is dropped to break the loop. Reported-by: Mingshuai Ren <renmingshuai@huawei.com> Closes: https://lore.kernel.org/netdev/20240314111713.5979-1-renmingshuai@huawei.com/ Fixes: 3bcb846ca4cf ("net: get rid of spin_trylock() in net_tx_action()") Fixes: e578d9c02587 ("net: sched: use counter to break reclassify loops") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Victor Nogueira <victor@mojatatu.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Tested-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20240415210728.36949-1-victor@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-18net: usb: qmi_wwan: add Lonsung U8300/U9300 productCoia Prant1-0/+2
Update the net usb qmi_wwan driver to support Longsung U8300/U9300. Enabling DTR on this modem was necessary to ensure stable operation. For U8300 Interface 4 is used by for QMI interface in stock firmware of U8300, the router which uses U8300 modem. Free the interface up, to rebind it to qmi_wwan driver. Interface 5 is used by for ADB interface in stock firmware of U8300, the router which uses U8300 modem. Free the interface up. The proper configuration is: Interface mapping is: 0: unknown (Debug), 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI, 5: ADB T: Bus=05 Lev=01 Prnt=03 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b05 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms For U9300 Interface 1 is used by for ADB interface in stock firmware of U9300, the router which uses U9300 modem. Free the interface up. Interface 4 is used by for QMI interface in stock firmware of U9300, the router which uses U9300 modem. Free the interface up, to rebind it to qmi_wwan driver. The proper configuration is: Interface mapping is: 0: ADB, 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI Note: Interface 3 of some models of the U9300 series can send AT commands. T: Bus=05 Lev=01 Prnt=05 Port=04 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b3c Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms Tested successfully using Modem Manager on U9300. Tested successfully using qmicli on U9300. Signed-off-by: Coia Prant <coiaprant@gmail.com> Link: https://lore.kernel.org/r/20240415142638.1756966-1-coiaprant@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-18selftests: adopt BPF's approach to quieter buildsJakub Kicinski3-16/+23
selftest build is fairly noisy, it's easy to miss warnings. It's standard practice to add alternative messages in the Makefile. I was grepping for existing solutions, and found that bpf already has the right knobs. Move them to lib.mk and adopt in net. Convert the basic rules in lib.mk. Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/20240411190534.444918-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-18netfilter: nf_tables: fix memleak in map from abort pathPablo Neira Ayuso1-2/+14
The delete set command does not rely on the transaction object for element removal, therefore, a combination of delete element + delete set from the abort path could result in restoring twice the refcount of the mapping. Check for inactive element in the next generation for the delete element command in the abort path, skip restoring state if next generation bit has been already cleared. This is similar to the activate logic using the set walk iterator. [ 6170.286929] ------------[ cut here ]------------ [ 6170.286939] WARNING: CPU: 6 PID: 790302 at net/netfilter/nf_tables_api.c:2086 nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.287071] Modules linked in: [...] [ 6170.287633] CPU: 6 PID: 790302 Comm: kworker/6:2 Not tainted 6.9.0-rc3+ #365 [ 6170.287768] RIP: 0010:nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.287886] Code: df 48 8d 7d 58 e8 69 2e 3b df 48 8b 7d 58 e8 80 1b 37 df 48 8d 7d 68 e8 57 2e 3b df 48 8b 7d 68 e8 6e 1b 37 df 48 89 ef eb c4 <0f> 0b 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 0f [ 6170.287895] RSP: 0018:ffff888134b8fd08 EFLAGS: 00010202 [ 6170.287904] RAX: 0000000000000001 RBX: ffff888125bffb28 RCX: dffffc0000000000 [ 6170.287912] RDX: 0000000000000003 RSI: ffffffffa20298ab RDI: ffff88811ebe4750 [ 6170.287919] RBP: ffff88811ebe4700 R08: ffff88838e812650 R09: fffffbfff0623a55 [ 6170.287926] R10: ffffffff8311d2af R11: 0000000000000001 R12: ffff888125bffb10 [ 6170.287933] R13: ffff888125bffb10 R14: dead000000000122 R15: dead000000000100 [ 6170.287940] FS: 0000000000000000(0000) GS:ffff888390b00000(0000) knlGS:0000000000000000 [ 6170.287948] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6170.287955] CR2: 00007fd31fc00710 CR3: 0000000133f60004 CR4: 00000000001706f0 [ 6170.287962] Call Trace: [ 6170.287967] <TASK> [ 6170.287973] ? __warn+0x9f/0x1a0 [ 6170.287986] ? nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.288092] ? report_bug+0x1b1/0x1e0 [ 6170.287986] ? nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.288092] ? report_bug+0x1b1/0x1e0 [ 6170.288104] ? handle_bug+0x3c/0x70 [ 6170.288112] ? exc_invalid_op+0x17/0x40 [ 6170.288120] ? asm_exc_invalid_op+0x1a/0x20 [ 6170.288132] ? nf_tables_chain_destroy+0x2b/0x220 [nf_tables] [ 6170.288243] ? nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.288366] ? nf_tables_chain_destroy+0x2b/0x220 [nf_tables] [ 6170.288483] nf_tables_trans_destroy_work+0x588/0x590 [nf_tables] Fixes: 591054469b3e ("netfilter: nf_tables: revisit chain/object refcounting from elements") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-18btrfs: fallback if compressed IO fails for ENOSPCSweet Tea Dorminy1-7/+6
In commit b4ccace878f4 ("btrfs: refactor submit_compressed_extents()"), if an async extent compressed but failed to find enough space, we changed from falling back to an uncompressed write to just failing the write altogether. The principle was that if there's not enough space to write the compressed version of the data, there can't possibly be enough space to write the larger, uncompressed version of the data. However, this isn't necessarily true: due to fragmentation, there could be enough discontiguous free blocks to write the uncompressed version, but not enough contiguous free blocks to write the smaller but unsplittable compressed version. This has occurred to an internal workload which relied on write()'s return value indicating there was space. While rare, it has happened a few times. Thus, in order to prevent early ENOSPC, re-add a fallback to uncompressed writing. Fixes: b4ccace878f4 ("btrfs: refactor submit_compressed_extents()") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Qu Wenruo <wqu@suse.com> Co-developed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2024-04-18btrfs: scrub: run relocation repair when/only neededNaohiro Aota1-9/+9
When btrfs scrub finds an error, it reads mirrors to find correct data. If all the errors are fixed, sctx->error_bitmap is cleared for the stripe range. However, in the zoned mode, it runs relocation to repair scrub errors when the bitmap is *not* empty, which is a flipped condition. Also, it runs the relocation even if the scrub is read-only. This was missed by a fix in commit 1f2030ff6e49 ("btrfs: scrub: respect the read-only flag during repair"). The repair is only necessary when there is a repaired sector and should be done on read-write scrub. So, tweak the condition for both regular and zoned case. Fixes: 54765392a1b9 ("btrfs: scrub: introduce helper to queue a stripe for scrub") Fixes: 1f2030ff6e49 ("btrfs: scrub: respect the read-only flag during repair") CC: stable@vger.kernel.org # 6.6+ Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2024-04-18btrfs: remove colon from messages with stateDavid Sterba1-1/+1
The message format in syslog is usually made of two parts: prefix ":" message Various tools parse the prefix up to the first ":". When there's an additional status of a btrfs filesystem like [5.199782] BTRFS info (device nvme1n1p1: state M): use zstd compression, level 9 where 'M' is for remount, there's one more ":" that does not conform to the format. Remove it. Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2024-04-18bcachefs: Fix bio alloc in check_extent_checksum()Kent Overstreet1-1/+1
if the buffer is virtually mapped it won't be a single bvec Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-18bcachefs: fix leak in bch2_gc_write_reflink_keyKent Overstreet1-1/+2
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-18bcachefs: KEY_TYPE_error is allowed for reflinkKent Overstreet1-1/+2
KEY_TYPE_error is left behind when we have to delete all pointers in an extent in fsck; it allows errors to be correctly returned by reads later. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-18bcachefs: Fix bch2_dev_btree_bitmap_marked_sectors() shiftKent Overstreet2-5/+5
Fixes: 27c15ed297cb bcachefs: bch_member.btree_allocated_bitmap Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-17gpiolib: swnode: Remove wrong header inclusionAndy Shevchenko1-1/+0
The flags in the software node properties are supposed to be the GPIO lookup flags, which are provided by gpio/machine.h, as the software nodes are the kernel internal thing and doesn't need to rely to any of ABIs. Fixes: e7f9ff5dc90c ("gpiolib: add support for software nodes") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-04-17bootconfig: Fix the kerneldoc of _xbc_exit()Masami Hiramatsu (Google)1-1/+2
Fix the kerneldoc of _xbc_exit() which is updated to have an @early argument and the function name is changed. Link: https://lore.kernel.org/all/171321744474.599864.13532445969528690358.stgit@devnote2/ Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404150036.kPJ3HEFA-lkp@intel.com/ Fixes: 89f9a1e876b5 ("bootconfig: use memblock_free_late to free xbc memory to buddy") Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-04-17Merge tag 'pwm/for-6.9-rc5-fixes' of ↵Linus Torvalds4-32/+66
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux Pull pwm fixes from Uwe Kleine-König: "The first patch fixes a regression in the suspend/resume path for the dwc pwm driver that was introduced in v6.9-rc1 when support for 16 channel devices was added. The second patch fixes a bunch of device tree binding check warnings" * tag 'pwm/for-6.9-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: dt-bindings: pwm: mediatek,pwm-disp: Document power-domains property pwm: dwc: allow suspend/resume for 16 channels
2024-04-17ice: Remove ndo_get_phys_port_nameDariusz Aftanski1-34/+0
ndo_get_phys_port_name is never actually used, as in switchdev devlink is always being created. Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Dariusz Aftanski <dariusz.aftanski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-17x86/retpolines: Enable the default thunk warning only on relevant configsBorislav Petkov (AMD)1-0/+7
The using-default-thunk warning check makes sense only with configurations which actually enable the special return thunks. Otherwise, it fires on unrelated 32-bit configs on which the special return thunks won't even work (they're 64-bit only) and, what is more, those configs even go off into the weeds when booting in the alternatives patching code, leading to a dead machine. Fixes: 4461438a8405 ("x86/retpoline: Ensure default return thunk isn't used at runtime") Reported-by: Klara Modin <klarasmodin@gmail.com> Reported-by: Erhard Furtner <erhard_f@mailbox.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Klara Modin <klarasmodin@gmail.com> Link: https://lore.kernel.org/r/78e0d19c-b77a-4169-a80f-2eef91f4a1d6@gmail.com Link: https://lore.kernel.org/r/20240413024956.488d474e@yea
2024-04-17ice: Add automatic VF reset on Tx MDD eventsMarcin Szycik3-17/+67
In cases when VF sends malformed packets that are classified as malicious, it can cause Tx queue to freeze as a result of Malicious Driver Detection event. Such malformed packets can appear as a result of a faulty userspace app running on VF. This frozen queue can be stuck for several minutes being unusable. User might prefer to immediately bring the VF back to operational state after such event, which can be done by automatically resetting the VF which caused MDD. This is already implemented for Rx events (mdd-auto-reset-vf flag private flag needs to be set). Extend the VF auto reset to also cover Tx MDD events. When any MDD event occurs on VF (Tx or Rx) and the mdd-auto-reset-vf private flag is set, perform a graceful VF reset to quickly bring it back to operational state. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Co-developed-by: Liang-Min Wang <liang-min.wang@intel.com> Signed-off-by: Liang-Min Wang <liang-min.wang@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-17drm/radeon: silence UBSAN warning (v3)Alex Deucher1-5/+5
Convert a variable sized array from [1] to []. v2: fix up a few more. v3: integrate comments from Kees. Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Jeff Johnson <quic_jjohnson@quicinc.com> (v2) Acked-by: Christian König <christian.koenig@amd.com> (v1) Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: keescook@chromium.org
2024-04-17drm/radeon: make -fstrict-flex-arrays=3 happyAlex Deucher1-2/+6
The driver parses a union where the layout up through the first array is the same, however, the array has different sizes depending on the elements in the union. Be explicit to fix the UBSAN checker. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3323 Fixes: df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3") Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Kees Cook <keescook@chromium.org>
2024-04-17drm/amdgpu: fix visible VRAM handling during faultsChristian König5-57/+53
When we removed the hacky start code check we actually didn't took into account that *all* VRAM pages needs to be CPU accessible. Clean up the code and unify the handling into a single helper which checks if the whole resource is CPU accessible. The only place where a partial check would make sense is during eviction, but that is neglitible. Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: aed01a68047b ("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org
2024-04-17drm/amdgpu: validate the parameters of bo mapping operations more clearlyxinhui pan1-26/+46
Verify the parameters of amdgpu_vm_bo_(map/replace_map/clearing_mappings) in one common place. Fixes: dc54d3d1744d ("drm/amdgpu: implement AMDGPU_VA_OP_CLEAR v2") Cc: stable@vger.kernel.org Reported-by: Vlad Stolyarov <hexed@google.com> Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-17Merge branch 'svm' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini5-67/+57
Clean up SVM's enter/exit assembly code so that it can be compiled without OBJECT_FILES_NON_STANDARD. The "standard" __svm_vcpu_run() can't be made 100% bulletproof, as RBP isn't restored on #VMEXIT, but that's also the case for __vmx_vcpu_run(), and getting "close enough" is better than not even trying. As for SEV-ES, after yet another refresher on swap types, I realized KVM can simply let the hardware restore registers after #VMEXIT, all that's missing is storing the current values to the host save area (they are swap type B). This should provide 100% accuracy when using stack frames for unwinding, and requires less assembly. In between, build the SEV-ES code iff CONFIG_KVM_AMD_SEV=y, and yank out "support" for 32-bit kernels in __svm_sev_es_vcpu_run, which was unnecessarily polluting the code for a configuration that is disabled at build time. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-04-17netfilter: nf_tables: restore set elements when delete set failsPablo Neira Ayuso5-20/+45
From abort path, nft_mapelem_activate() needs to restore refcounters to the original state. Currently, it uses the set->ops->walk() to iterate over these set elements. The existing set iterator skips inactive elements in the next generation, this does not work from the abort path to restore the original state since it has to skip active elements instead (not inactive ones). This patch moves the check for inactive elements to the set iterator callback, then it reverses the logic for the .activate case which needs to skip active elements. Toggle next generation bit for elements when delete set command is invoked and call nft_clear() from .activate (abort) path to restore the next generation bit. The splat below shows an object in mappings memleak: [43929.457523] ------------[ cut here ]------------ [43929.457532] WARNING: CPU: 0 PID: 1139 at include/net/netfilter/nf_tables.h:1237 nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables] [...] [43929.458014] RIP: 0010:nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables] [43929.458076] Code: 83 f8 01 77 ab 49 8d 7c 24 08 e8 37 5e d0 de 49 8b 6c 24 08 48 8d 7d 50 e8 e9 5c d0 de 8b 45 50 8d 50 ff 89 55 50 85 c0 75 86 <0f> 0b eb 82 0f 0b eb b3 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 [43929.458081] RSP: 0018:ffff888140f9f4b0 EFLAGS: 00010246 [43929.458086] RAX: 0000000000000000 RBX: ffff8881434f5288 RCX: dffffc0000000000 [43929.458090] RDX: 00000000ffffffff RSI: ffffffffa26d28a7 RDI: ffff88810ecc9550 [43929.458093] RBP: ffff88810ecc9500 R08: 0000000000000001 R09: ffffed10281f3e8f [43929.458096] R10: 0000000000000003 R11: ffff0000ffff0000 R12: ffff8881434f52a0 [43929.458100] R13: ffff888140f9f5f4 R14: ffff888151c7a800 R15: 0000000000000002 [43929.458103] FS: 00007f0c687c4740(0000) GS:ffff888390800000(0000) knlGS:0000000000000000 [43929.458107] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [43929.458111] CR2: 00007f58dbe5b008 CR3: 0000000123602005 CR4: 00000000001706f0 [43929.458114] Call Trace: [43929.458118] <TASK> [43929.458121] ? __warn+0x9f/0x1a0 [43929.458127] ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables] [43929.458188] ? report_bug+0x1b1/0x1e0 [43929.458196] ? handle_bug+0x3c/0x70 [43929.458200] ? exc_invalid_op+0x17/0x40 [43929.458211] ? nft_setelem_data_deactivate+0xd7/0xf0 [nf_tables] [43929.458271] ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables] [43929.458332] nft_mapelem_deactivate+0x24/0x30 [nf_tables] [43929.458392] nft_rhash_walk+0xdd/0x180 [nf_tables] [43929.458453] ? __pfx_nft_rhash_walk+0x10/0x10 [nf_tables] [43929.458512] ? rb_insert_color+0x2e/0x280 [43929.458520] nft_map_deactivate+0xdc/0x1e0 [nf_tables] [43929.458582] ? __pfx_nft_map_deactivate+0x10/0x10 [nf_tables] [43929.458642] ? __pfx_nft_mapelem_deactivate+0x10/0x10 [nf_tables] [43929.458701] ? __rcu_read_unlock+0x46/0x70 [43929.458709] nft_delset+0xff/0x110 [nf_tables] [43929.458769] nft_flush_table+0x16f/0x460 [nf_tables] [43929.458830] nf_tables_deltable+0x501/0x580 [nf_tables] Fixes: 628bd3e49cba ("netfilter: nf_tables: drop map element references from preparation phase") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-17netfilter: nf_tables: missing iterator type in lookup walkPablo Neira Ayuso2-1/+3
Add missing decorator type to lookup expression and tighten WARN_ON_ONCE check in pipapo to spot earlier that this is unset. Fixes: 29b359cf6d95 ("netfilter: nft_set_pipapo: walk over current view on netlink dump") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-17s390/mm: Fix NULL pointer dereferenceSven Schnelle1-1/+2
The recently added check to figure out if a fault happened on gmap ASCE dereferences the gmap pointer in lowcore without checking that it is not NULL. For all non-KVM processes the pointer is NULL, so that some value from lowcore will be read. With the current layouts of struct gmap and struct lowcore the read value (aka ASCE) is zero, so that this doesn't lead to any observable bug; at least currently. Fix this by adding the missing NULL pointer check. Fixes: 64c3431808bd ("s390/entry: compare gmap asce to determine guest/host fault") Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2024-04-17Revert "drm/amd/display: fix USB-C flag update after enc10 feature init"Alex Deucher2-7/+5
This reverts commit b5abd7f983e14054593dc91d6df2aa5f8cc67652. This change breaks DSC on 4k monitors at 144Hz over USB-C. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3254 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Muhammad Ahmed <ahmed.ahmed@amd.com> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Charlene Liu <charlene.liu@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org
2024-04-17drm/amdkfd: Fix memory leak in create_process failureFelix Kuehling1-2/+2
Fix memory leak due to a leaked mmget reference on an error handling code path that is triggered when attempting to create KFD processes while a GPU reset is in progress. Fixes: 0ab2d7532b05 ("drm/amdkfd: prepare per-process debug enable and disable") CC: Xiaogang Chen <xiaogang.chen@amd.com> Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Tested-by: Harish Kasiviswanthan <Harish.Kasiviswanthan@amd.com> Reviewed-by: Mukul Joshi <mukul.joshi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-04-17drm/amdgpu: remove invalid resource->start check v2Christian König1-4/+0
The majority of those where removed in the commit aed01a68047b ("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2") But this one was missed because it's working on the resource and not the BO. Since we also no longer use a fake start address for visible BOs this will now trigger invalid mapping errors. v2: also remove the unused variable Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: aed01a68047b ("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2") CC: stable@vger.kernel.org Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-17platform/x86/amd/pmc: Extend Framework 13 quirk to more BIOSesMario Limonciello1-0/+9
BIOS 03.05 still hasn't fixed the spurious IRQ1 issue. As it's still being worked on there is still a possibility that it won't need to apply to future BIOS releases. Add a quirk for BIOS 03.05 as well. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240410141046.433-1-mario.limonciello@amd.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-04-17libbpf: Fix dump of subsequent char arraysQuentin Deslandes1-0/+4
When dumping a character array, libbpf will watch for a '\0' and set is_array_terminated=true if found. This prevents libbpf from printing the remaining characters of the array, treating it as a nul-terminated string. However, once this flag is set, it's never reset, leading to subsequent characters array not being printed properly: .str_multi = (__u8[2][16])[ [ 'H', 'e', 'l', ], ], This patch saves the is_array_terminated flag and restores its default (false) value before looping over the elements of an array, then restores it afterward. This way, libbpf's behavior is unchanged when dumping the characters of an array, but subsequent arrays are printed properly: .str_multi = (__u8[2][16])[ [ 'H', 'e', 'l', ], [ 'l', 'o', ], ], Signed-off-by: Quentin Deslandes <qde@naccy.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240413211258.134421-3-qde@naccy.de
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 12:50:51 +0300