summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-09-28ath11k: fix some sleeping in atomic bugsDan Carpenter1-9/+7
The ath11k_dbring_bufs_replenish() and ath11k_dbring_fill_bufs() take a "gfp" parameter but they since they take spinlocks, the allocations they do have to be atomic. This causes a bug because ath11k_dbring_buf_setup passes GFP_KERNEL for the gfp flags. The fix is to use GFP_ATOMIC and remove the unused parameters. Fixes: bd6478559e27 ("ath11k: Add direct buffer ring support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210812070434.GE31863@kili
2021-09-28ath11k: qmi: avoid error messages when dma allocation failsAaron Ma1-1/+1
qmi tries to allocate a large contiguous dma memory at first, on the AMD Ryzen platform it fails, then retries with small slices. So set flag GFP_NOWARN to avoid flooding dmesg. Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210823063258.37747-1-aaron.ma@canonical.com
2021-09-28ath11k: Replace one-element array with flexible-array memberGustavo A. R. Silva3-7/+4
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use "flexible array members"[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Refactor the code a bit according to the use of a flexible-array member in struct scan_chan_list_params instead of a one-element array, and use the struct_size() helper. Also, save 25 (too many) bytes that were being allocated: $ pahole -C channel_param drivers/net/wireless/ath/ath11k/reg.o struct channel_param { u8 chan_id; /* 0 1 */ u8 pwr; /* 1 1 */ u32 mhz; /* 2 4 */ /* Bitfield combined with next fields */ u32 half_rate:1; /* 4:16 4 */ u32 quarter_rate:1; /* 4:17 4 */ u32 dfs_set:1; /* 4:18 4 */ u32 dfs_set_cfreq2:1; /* 4:19 4 */ u32 is_chan_passive:1; /* 4:20 4 */ u32 allow_ht:1; /* 4:21 4 */ u32 allow_vht:1; /* 4:22 4 */ u32 allow_he:1; /* 4:23 4 */ u32 set_agile:1; /* 4:24 4 */ u32 psc_channel:1; /* 4:25 4 */ /* XXX 6 bits hole, try to pack */ u32 phy_mode; /* 8 4 */ u32 cfreq1; /* 12 4 */ u32 cfreq2; /* 16 4 */ char maxpower; /* 20 1 */ char minpower; /* 21 1 */ char maxregpower; /* 22 1 */ u8 antennamax; /* 23 1 */ u8 reg_class_id; /* 24 1 */ /* size: 25, cachelines: 1, members: 21 */ /* sum members: 23 */ /* sum bitfield members: 10 bits, bit holes: 1, sum bit holes: 6 bits */ /* last cacheline: 25 bytes */ } __attribute__((__packed__)); as previously, sizeof(struct scan_chan_list_params) was 32 bytes: $ pahole -C scan_chan_list_params drivers/net/wireless/ath/ath11k/reg.o struct scan_chan_list_params { u32 pdev_id; /* 0 4 */ u16 nallchans; /* 4 2 */ struct channel_param ch_param[1]; /* 6 25 */ /* size: 32, cachelines: 1, members: 3 */ /* padding: 1 */ /* last cacheline: 32 bytes */ }; and now with the flexible array transformation it is just 8 bytes: $ pahole -C scan_chan_list_params drivers/net/wireless/ath/ath11k/reg.o struct scan_chan_list_params { u32 pdev_id; /* 0 4 */ u16 nallchans; /* 4 2 */ struct channel_param ch_param[]; /* 6 0 */ /* size: 8, cachelines: 1, members: 3 */ /* padding: 2 */ /* last cacheline: 8 bytes */ }; This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). This issue was found with the help of Coccinelle and audited and fixed, manually. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210823172159.GA25800@embeddedor
2021-09-28ath11k: add caldata download support from EEPROMAnilkumar Kolli2-28/+127
Firmware updates EEPROM support capability in QMI FW caps, send QMI BDF download request message with file type EEPROM, to get caldata download from EEPROM. Firmware takes more time to update cal data from EEPROM, so increase QMI timeout. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210721201927.100369-5-jouni@codeaurora.org
2021-09-28ath11k: add caldata file for multiple radiosAnilkumar Kolli1-2/+11
If multiple PCI cards are attached, each needs its own caldata file. Added new Caldata file name, PCI Bus: cal-pci-0001:01:00.0.bin cal-pci-0000:01:00.0.bin AHB Bus: cal-ahb-c000000.wifi1.bin Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210721201927.100369-4-jouni@codeaurora.org
2021-09-28ath11k: clean up BDF download functionsAnilkumar Kolli1-147/+101
In current code, AHB/PCI uses two separate functions to download BDF file. Refactor code and make a common function to send QMI BDF download request for both AHB and PCI devices. This patch has no functional change. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210721201927.100369-3-jouni@codeaurora.org
2021-09-28ath11k: use hw_params to access board_size and cal_offsetAnilkumar Kolli4-10/+8
Reuse board_size from hw_params, add cal_offset to hw params. This patch is clean up only, there is no change in functionality. cal_size was unused, so remove that. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210721201927.100369-2-jouni@codeaurora.org
2021-09-28ath11k: Wstringop-overread warningArnd Bergmann1-1/+1
gcc-11 with the kernel address sanitizer prints a warning for this driver: In function 'ath11k_peer_assoc_h_vht', inlined from 'ath11k_peer_assoc_prepare' at drivers/net/wireless/ath/ath11k/mac.c:1632:2: drivers/net/wireless/ath/ath11k/mac.c:1164:13: error: 'ath11k_peer_assoc_h_vht_masked' reading 16 bytes from a region of size 4 [-Werror=stringop-overread] 1164 | if (ath11k_peer_assoc_h_vht_masked(vht_mcs_mask)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/ath/ath11k/mac.c: In function 'ath11k_peer_assoc_prepare': drivers/net/wireless/ath/ath11k/mac.c:1164:13: note: referencing argument 1 of type 'const u16 *' {aka 'const short unsigned int *'} drivers/net/wireless/ath/ath11k/mac.c:969:1: note: in a call to function 'ath11k_peer_assoc_h_vht_masked' 969 | ath11k_peer_assoc_h_vht_masked(const u16 vht_mcs_mask[NL80211_VHT_NSS_MAX]) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ According to analysis from gcc developers, this is a glitch in the way gcc tracks the size of struct members. This should really get fixed in gcc, but it's also easy to work around this instance by changing the function prototype to no include the length of the array. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99673 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210322160253.4032422-5-arnd@kernel.org
2021-09-28ath11k: Add spectral scan support for QCN9074Karthikeyan Periyasamy1-1/+4
Populate the below hw parameters as per the QCN9074 support 1. FFT bin size as two bytes 2. Maximum FFT bin count as 1024 3. Summary report pad size as 16 4. FFT report header length as 24 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210721180809.90960-5-jouni@codeaurora.org
2021-09-28ath11k: Fix the spectral minimum FFT bin countKarthikeyan Periyasamy1-1/+1
User was not able to configure the spectral with the FFT bin count 32. In all supported platforms, the expected minimum FFT bin count is 32 but it was wrongly defined as 64. This restrict the user to not configure down to the actually supported minimum FFT bin count. So update the minimum FFT bin count as 32. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.4.0.1-00330-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210721180809.90960-4-jouni@codeaurora.org
2021-09-28ath11k: Introduce spectral hw configurable paramKarthikeyan Periyasamy4-15/+30
Below parameters have been identified as configurable across the platforms. So to scale the spectral across the platforms, move these parameter into hw param. 1. Maximum FFT bins 2. Summary report pad size 3. FFT report header length Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.4.0.1-00330-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210721180809.90960-3-jouni@codeaurora.org
2021-09-28ath11k: Refactor spectral FFT bin sizeKarthikeyan Periyasamy3-12/+40
In IPQ8074, actual FFT bin size is two bytes but hardware reports it with extra pad size of two bytes for each FFT bin. So finally each FFT bin advertise as four bytes size in the collected data. This FFT pad is not advertised in IPQ6018 platform. To accommodate this different behavior across the platforms, introduce the hw param fft_pad_sz and use it in spectral process. Also group all the spectral params under the new structure in hw param structure for scalable in future. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.4.0.1-00330-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210721180809.90960-2-jouni@codeaurora.org
2021-09-28ath11k: add support for 80P80 and 160 MHz bandwidthP Praneesh5-14/+136
For 160 MHz, nss_ratio_enabled flag is added to indicate firmware supports sending NSS ratio information from firmware as a part of service ready ext event. Extract this NSS ratio info from service ready ext event and save this information in ath11k_pdev_cap to calculate NSS ratio. Current firmware configurations support two types of NSS ratio which is WMI_NSS_RATIO_1_NSS for QCN9074 and WMI_NSS_RATIO_1BY2_NSS for IPQ8074. Based on this two configuration, max supported NSS getting calculated. Move ath11k_peer_assoc_h_phymode() before ath11k_peer_assoc_h_vht() to get arg->peer_phymode updated. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-00097-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01467-QCAHKSWPL_SILICONZ-1 Co-developed-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Co-developed-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: P Praneesh <ppranees@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210721173615.75637-2-jouni@codeaurora.org
2021-09-28ath11k: add support for setting fixed HE rate/gi/ltfMiles Hu3-41/+580
Support setting fixed HE rate/gi/ltf values that we are now able to send to the kernel using nl80211. The added code is reusing parts of the existing code path already used for HT/VHT. The new helpers are symmetric to how we do it for HT/VHT. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00235-QCAHKSWPL_SILICONZ-1 Signed-off-by: Miles Hu <milehu@codeaurora.org> Co-developed-by: Aloka Dixit <alokad@codeaurora.org> Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Co-developed-by: Lavanya Suresh <lavaks@codeaurora.org> Signed-off-by: Lavanya Suresh <lavaks@codeaurora.org> Co-developed-by: Pradeep Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Pradeep Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210721173615.75637-1-jouni@codeaurora.org
2021-09-24ath11k: monitor mode clean up to use separate APIsSeevalamuthu Mariappan4-51/+110
If monitor interface is enabled in co-exist mode, only local traffic are captured. It's caused by missing monitor vdev in co-exist mode. So, monitor mode clean up is done with separate Monitor APIs. For this, introduce flags monitor_started and monitor_vdev_created. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01725-QCAHKSWPL_SILICONZ-1 Co-developed-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Co-developed-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210721162053.46290-4-jouni@codeaurora.org
2021-09-24ath11k: add separate APIs for monitor modeSeevalamuthu Mariappan2-6/+370
Add separate APIs for monitor_vdev_create/monitor_vdev_delete and monitor_vdev_start/monitor_vdev_stop. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01725-QCAHKSWPL_SILICONZ-1 Co-developed-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Co-developed-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210721162053.46290-3-jouni@codeaurora.org
2021-09-24ath11k: move static function ath11k_mac_vdev_setup_sync to topSeevalamuthu Mariappan1-14/+14
This is to prepare for monitor mode clean up. No functional changes are done. Co-developed-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Co-developed-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210721162053.46290-2-jouni@codeaurora.org
2021-09-21wcn36xx: Implement Idle Mode Power SaveBryan O'Donoghue4-3/+68
Idle Mode Power Save (IMPS) is a power saving mechanism which when called by wcn36xx will cause the radio hardware to enter power collapse. This particular call maps nicely to a simple conjunction/disjunction around IEEE80211_CONF_CHANGE_IDLE and IEEE80211_CONF_IDLE. Here we enter idle when we are not associated with an AP. The kernel will incrementally toggle idle on/off in the process of trying to establish a connection, thus saving power until we are connected to the AP again, at which point we give way to BMPS if power_save is on. We've validated that with IMPS an apq8039 device which has the wcn36xx module loaded but, has not authenticated with an AP will get to VMIN on suspend and will not without IMPS. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Benjamin Li <benl@squareup.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210909153320.2624649-1-bryan.odonoghue@linaro.org
2021-09-21wcn36xx: Add ability for wcn36xx_smd_dump_cmd_req to pass two's complementBryan O'Donoghue1-1/+1
Qcom documents suggest passing of negative values to the dump command, however currently we convert from string to u32 not s32, so we cannot pass a two's complement value to the firmware in this way. There is in fact only one parameter which takes a two's complement value <tigger threshold> in the antenna diversity switch command. Downstream: iwpriv wlan0 dump 71 3 <schedule period> <trigger threshold> <hysteresis value> Upstream: echo "71 3 <schedule period> <trigger threshold> <hysteresis value>" > /sys/kernel/debug/ieee80211/phy0/wcn36xx/dump Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware") Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210909144428.2564650-3-bryan.odonoghue@linaro.org
2021-09-21wcn36xx: Fix Antenna Diversity SwitchingBryan O'Donoghue1-1/+3
We have been tracking a strange bug with Antenna Diversity Switching (ADS) on wcn3680b for a while. ADS is configured like this: A. Via a firmware configuration table baked into the NV area. 1. Defines if ADS is enabled. 2. Defines which GPIOs are connected to which antenna enable pin. 3. Defines which antenna/GPIO is primary and which is secondary. B. WCN36XX_CFG_VAL(ANTENNA_DIVERSITY, N) N is a bitmask of available antenna. Setting N to 3 indicates a bitmask of enabled antenna (1 | 2). Obviously then we can set N to 1 or N to 2 to fix to a particular antenna and disable antenna diversity. C. WCN36XX_CFG_VAL(ASD_PROBE_INTERVAL, XX) XX is the number of beacons between each antenna RSSI check. Setting this value to 50 means, every 50 received beacons, run the ADS algorithm. D. WCN36XX_CFG_VAL(ASD_TRIGGER_THRESHOLD, YY) YY is a two's complement integer which specifies the RSSI decibel threshold below which ADS will run. We default to -60db here, meaning a measured RSSI <= -60db will trigger an ADS probe. E. WCN36XX_CFG_VAL(ASD_RTT_RSSI_HYST_THRESHOLD, Z) Z is a hysteresis value, indicating a delta which the RSSI must exceed for the antenna switch to be valid. For example if HYST_THRESHOLD == 3 AntennaId1-RSSI == -60db and AntennaId-2-RSSI == -58db then firmware will not switch antenna. The threshold needs to be -57db or better to satisfy the criteria. F. A firmware feature bit also exists ANTENNA_DIVERSITY_SELECTION. This feature bit is used by the firmware to report if ANTENNA_DIVERSITY_SELECTION is supported. The host is not required to toggle this bit to enable or disable ADS. ADS works like this: A. Every XX beacons the firmware switches to or remains on the primary antenna. B. The firmware then sends a Request-To-Send (RTS) packet to the AP. C. The firmware waits for a Clear-To-Send (CTS) response from the AP. D. The firmware then notes the received RSSI on the CTS packet. E. The firmware then repeats steps A-D on the secondary antenna. F. Subsequently if the RSSI on the measured antenna is better than ASD_TRIGGER_THRESHOLD + the active antenna's RSSI then the measured antenna becomes the active antenna. G. If RSSI rises past ASD_TRIGGER_THRESHOLD then ADS doesn't run at all even if there is a substantially better RSSI on the alternative antenna. What we have been observing is that the RTS packet is being sent but the MAC address is a byte-swapped version of the target MAC. The ADS/RTS MAC is corrupted only when the link is encrypted, if the AP is open the RTS MAC is correct. Similarly if we configure the firmware to an RTS/CTS sequence for regular data - the transmitted RTS MAC is correctly formatted. Internally the wcn36xx firmware uses the indexes in the SMD commands to populate and extract data from specific entries in an STA lookup table. The AP's MAC appears a number of times in different indexes within this lookup table, so the MAC address extracted for the data-transmit RTS and the MAC address extracted for the ADS/RTS packet are not the same STA table index. Our analysis indicates the relevant firmware STA table index is "bssSelfStaIdx". There is an STA populate function responsible for formatting the MAC address of the bssSelfStaIdx including byte-swapping the MAC address. Its clear then that the required STA populate command did not run for bssSelfStaIdx. So taking a look at the sequence of SMD commands sent to the firmware we see the following downstream when moving from an unencrypted to encrypted BSS setup. - WLAN_HAL_CONFIG_BSS_REQ - WLAN_HAL_CONFIG_STA_REQ - WLAN_HAL_SET_STAKEY_REQ Upstream in wcn36xx we have - WLAN_HAL_CONFIG_BSS_REQ - WLAN_HAL_SET_STAKEY_REQ The solution then is to add the missing WLAN_HAL_CONFIG_STA_REQ between WLAN_HAL_CONFIG_BSS_REQ and WLAN_HAL_SET_STAKEY_REQ. No surprise WLAN_HAL_CONFIG_STA_REQ is the routine responsible for populating the STA lookup table in the firmware and once done the MAC sent by the ADS routine is in the correct byte-order. This bug is apparent with ADS but it is also the case that any other firmware routine that depends on the "bssSelfStaIdx" would retrieve malformed data on an encrypted link. Fixes: 3e977c5c523d ("wcn36xx: Define wcn3680 specific firmware parameters") Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Benjamin Li <benl@squareup.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210909144428.2564650-2-bryan.odonoghue@linaro.org
2021-09-21wcn36xx: handle connection loss indicationBenjamin Li1-11/+33
Firmware sends delete_sta_context_ind when it detects the AP has gone away in STA mode. Right now the handler for that indication only handles AP mode; fix it to also handle STA mode. Cc: stable@vger.kernel.org Signed-off-by: Benjamin Li <benl@squareup.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210901180606.11686-1-benl@squareup.com
2021-09-16ath11k: Align bss_chan_info structure with firmwareSeevalamuthu Mariappan2-1/+3
pdev_id in structure 'wmi_pdev_bss_chan_info_event' is wrongly placed at the beginning. This causes invalid values in survey dump. Hence, align the structure with the firmware. Note: The firmware releases follow this order since the feature was implemented. Also, it is not changing across the branches including QCA6390. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ritesh Singh <ritesi@codeaurora.org> Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210720214922.118078-3-jouni@codeaurora.org
2021-09-16ath11k: add support in survey dump with bss_chan_infoSeevalamuthu Mariappan2-0/+4
Survey dump statistics is not displaying channel rx and tx time because the service flag is not enabled. Enable the service flag "bss_chan_info" in wmi_resource_config to fetch and print the stats for the specific pdev. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ritesh Singh <ritesi@codeaurora.org> Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210720214922.118078-2-jouni@codeaurora.org
2021-09-16ath11k: Rename atf_config to flag1 in target_resource_configSeevalamuthu Mariappan2-2/+2
The flag's purpose is not only meant for ATF configs. Rename atf_config to flag1, so it can be used for future purposes. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210720214922.118078-1-jouni@codeaurora.org
2021-09-16ath11k: fix 4addr multicast packet txKarthikeyan Periyasamy5-4/+28
In 4addr, AP wired backbone to STA wired backbone ping fails due to ARP request not getting answered. Here 4addr ARP multicast packet is sent in 3addr, so that 4addr STA not honouring the 3addr ARP multicast packet. Fix this issue by sending out multicast packet in 4addr format, firmware expects peer meta flag instead of vdev meta flag in Tx descriptor. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01641-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210720213147.90042-2-jouni@codeaurora.org
2021-09-16ath11k: fix 4-addr tx failure for AP and STA modesSathishkumar Muruganandam2-2/+49
Ath11k FW requires peer parameter WMI_PEER_USE_4ADDR to be set for 4-addr peers allowing 4-address frame transmission to those peers. Add ath11k driver callback for sta_set_4addr() to queue new workq set_4addr_wk only once based on new boolean, use_4addr_set. sta_set_4addr() will be called during 4-addr STA association cases applicable for both AP and STA modes. In ath11k_sta_set_4addr_wk(), AP mode: WMI_PEER_USE_4ADDR will be set for the corresponding associated 4-addr STA(s) STA mode: WMI_PEER_USE_4ADDR will be set for the AP to which the 4-addr STA got associated. Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210720213147.90042-1-jouni@codeaurora.org
2021-09-16ath9k: owl-loader: fetch pci init values through nvmemChristian Lamparter1-29/+76
extends the owl loader to fetch important pci initialization values - which are stored together with the calibration data - through the nvmem subsystem. This allows for much faster WIFI/ath9k initializations on devices that do not require to perform any post-processing (like XOR'ing/ reversal or unpacking)... than the current way through the firmware_request which involves the filesystem/userspace. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/bc79ba1c6f6435000577bf1e5f4d7ebe18a8df97.1630157099.git.chunkeey@gmail.com
2021-09-16ath9k: fetch calibration data via nvmem subsystemChristian Lamparter3-1/+69
On most embedded ath9k devices (like range extenders, routers, accesspoints, ...) the calibration data is stored in a MTD partitions named "ART", or "caldata"/ "calibration". Since commit 4b361cfa8624 ("mtd: core: add OTP nvmem provider support"): All MTD partitions are all automatically available through the nvmem subsystem. This feature - together with an nvmem cell definition either in the platform data or via device-tree allows drivers to get the data necessary for initializing the WIFI, without having to wait around for the filesystem and userspace to do the extractions. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/f9b732b50a3453fadf3923cc75d365bae3505fe7.1630157099.git.chunkeey@gmail.com
2021-09-13Linux 5.15-rc1Linus Torvalds1-2/+2
2021-09-13Merge tag 'perf-tools-for-v5.15-2021-09-11' of ↵Linus Torvalds36-175/+1147
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Add missing fields and remove some duplicate fields when printing a perf_event_attr. - Fix hybrid config terms list corruption. - Update kernel header copies, some resulted in new kernel features being automagically added to 'perf trace' syscall/tracepoint argument id->string translators. - Add a file generated during the documentation build to .gitignore. - Add an option to build without libbfd, as some distros, like Debian consider its ABI unstable. - Add support to print a textual representation of IBS raw sample data in 'perf report'. - Fix bpf 'perf test' sample mismatch reporting - Fix passing arguments to stackcollapse report in a 'perf script' python script. - Allow build-id with trailing zeros. - Look for ImageBase in PE file to compute .text offset. * tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits) tools headers UAPI: Update tools's copy of drm.h headers tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync linux/fs.h with the kernel sources tools headers UAPI: Sync linux/in.h copy with the kernel sources perf tools: Add an option to build without libbfd perf tools: Allow build-id with trailing zeros perf tools: Fix hybrid config terms list corruption perf tools: Factor out copy_config_terms() and free_config_terms() perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields perf tools: Ignore Documentation dependency file perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions tools include UAPI: Update linux/mount.h copy perf beauty: Cover more flags in the move_mount syscall argument beautifier tools headers UAPI: Sync linux/prctl.h with the kernel sources tools include UAPI: Sync sound/asound.h copy with the kernel sources tools headers UAPI: Sync linux/kvm.h with the kernel sources tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources perf report: Add support to print a textual representation of IBS raw sample data perf report: Add tools/arch/x86/include/asm/amd-ibs.h perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings ...
2021-09-13Merge tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of ↵Linus Torvalds4-9/+26
git://github.com/ojeda/linux Pull compiler attributes updates from Miguel Ojeda: - Fix __has_attribute(__no_sanitize_coverage__) for GCC 4 (Marco Elver) - Add Nick as Reviewer for compiler_attributes.h (Nick Desaulniers) - Move __compiletime_{error|warning} (Nick Desaulniers) * tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux: compiler_attributes.h: move __compiletime_{error|warning} MAINTAINERS: add Nick as Reviewer for compiler_attributes.h Compiler Attributes: fix __has_attribute(__no_sanitize_coverage__) for GCC 4
2021-09-13Merge tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linuxLinus Torvalds5-21/+36
Pull auxdisplay updates from Miguel Ojeda: "An assortment of improvements for auxdisplay: - Replace symbolic permissions with octal permissions (Jinchao Wang) - ks0108: Switch to use module_parport_driver() (Andy Shevchenko) - charlcd: Drop unneeded initializers and switch to C99 style (Andy Shevchenko) - hd44780: Fix oops on module unloading (Lars Poeschel) - Add I2C gpio expander example (Ralf Schlatterbeck)" * tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux: auxdisplay: Replace symbolic permissions with octal permissions auxdisplay: ks0108: Switch to use module_parport_driver() auxdisplay: charlcd: Drop unneeded initializers and switch to C99 style auxdisplay: hd44780: Fix oops on module unloading auxdisplay: Add I2C gpio expander example
2021-09-12Merge tag 'smp-urgent-2021-09-12' of ↵Linus Torvalds8-165/+598
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull CPU hotplug updates from Thomas Gleixner: "Updates for the SMP and CPU hotplug: - Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the original hotplug code and now causing trouble with the ARM64 cache topology setup due to the pointless SMP function call. It's not longer required as the hotplug callbacks are guaranteed to be invoked on the upcoming CPU. - Remove the deprecated and now unused CPU hotplug functions - Rewrite the CPU hotplug API documentation" * tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation: core-api/cpuhotplug: Rewrite the API section cpu/hotplug: Remove deprecated CPU-hotplug functions. thermal: Replace deprecated CPU-hotplug functions. drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()
2021-09-12Merge tag 'char-misc-5.15-rc1-lkdtm' of ↵Linus Torvalds2-11/+27
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull misc driver fix from Greg KH: "Here is a single patch for 5.15-rc1, for the lkdtm misc driver. It resolves a build issue that many people were hitting with your current tree, and Kees and others felt would be good to get merged before -rc1 comes out, to prevent them from having to constantly hit it as many development trees restart on -rc1, not older -rc releases. It has NOT been in linux-next, but has passed 0-day testing and looks 'obviously correct' when reviewing it locally :)" * tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: lkdtm: Use init_uts_ns.name instead of macros
2021-09-12Merge tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmiLinus Torvalds1-12/+11
Pull IPMI updates from Corey Minyard: "A couple of very minor fixes for style and rate limiting. Nothing big, but probably needs to go in" * tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi: char: ipmi: use DEVICE_ATTR helper macro ipmi: rate limit ipmi smi_event failure message
2021-09-12Merge tag 'sched_urgent_for_v5.15_rc1' of ↵Linus Torvalds2-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Make sure the idle timer expires in hardirq context, on PREEMPT_RT - Make sure the run-queue balance callback is invoked only on the outgoing CPU * tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Prevent balance_push() on remote runqueues sched/idle: Make the idle timer expire in hard interrupt context
2021-09-12Merge tag 'locking_urgent_for_v5.15_rc1' of ↵Linus Torvalds4-94/+120
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Borislav Petkov: - Fix the futex PI requeue machinery to not return to userspace in inconsistent state - Avoid a potential null pointer dereference in the ww_mutex deadlock check - Other smaller cleanups and optimizations * tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rtmutex: Fix ww_mutex deadlock check futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic() futex: Avoid redundant task lookup futex: Clarify comment for requeue_pi_wake_futex() futex: Prevent inconsistent state and exit race futex: Return error code instead of assigning it without effect locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT
2021-09-12Merge tag 'timers_urgent_for_v5.15_rc1' of ↵Linus Torvalds1-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Borislav Petkov: - Handle negative second values properly when converting a timespec64 to nanoseconds. * tag 'timers_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: Handle negative seconds correctly in timespec64_to_ns()
2021-09-12Merge branch 'misc.namei' of ↵Linus Torvalds2-59/+58
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull namei updates from Al Viro: "Clearing fallout from mkdirat in io_uring series. The fix in the kern_path_locked() patch plus associated cleanups" * 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: putname(): IS_ERR_OR_NULL() is wrong here namei: Standardize callers of filename_create() namei: Standardize callers of filename_lookup() rename __filename_parentat() to filename_parentat() namei: Fix use after free in kern_path_locked
2021-09-12Merge tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds12-21/+37
Pull smbfs updates from Steve French: "cifs/smb3 updates: - DFS reconnect fix - begin creating common headers for server and client - rename the cifs_common directory to smbfs_common to be more consistent ie change use of the name cifs to smb (smb3 or smbfs is more accurate, as the very old cifs dialect has long been superseded by smb3 dialects). In the future we can rename the fs/cifs directory to fs/smbfs. This does not include the set of multichannel fixes nor the two deferred close fixes (they are still being reviewed and tested)" * tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: properly invalidate cached root handle when closing it cifs: move SMB FSCTL definitions to common code cifs: rename cifs_common to smbfs_common cifs: update FSCTL definitions
2021-09-12Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds41-325/+4127
Pull virtio updates from Michael Tsirkin: - vduse driver ("vDPA Device in Userspace") supporting emulated virtio block devices - virtio-vsock support for end of record with SEQPACKET - vdpa: mac and mq support for ifcvf and mlx5 - vdpa: management netlink for ifcvf - virtio-i2c, gpio dt bindings - misc fixes and cleanups * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits) Documentation: Add documentation for VDUSE vduse: Introduce VDUSE - vDPA Device in Userspace vduse: Implement an MMU-based software IOTLB vdpa: Support transferring virtual addressing during DMA mapping vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap() vdpa: Add an opaque pointer for vdpa_config_ops.dma_map() vhost-iotlb: Add an opaque pointer for vhost IOTLB vhost-vdpa: Handle the failure of vdpa_reset() vdpa: Add reset callback in vdpa_config_ops vdpa: Fix some coding style issues file: Export receive_fd() to modules eventfd: Export eventfd_wake_count to modules iova: Export alloc_iova_fast() and free_iova_fast() virtio-blk: remove unneeded "likely" statements virtio-balloon: Use virtio_find_vqs() helper vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro vsock_test: update message bounds test for MSG_EOR af_vsock: rename variables in receive loop virtio/vsock: support MSG_EOR bit processing vhost/vsock: support MSG_EOR bit processing ...
2021-09-12Merge tag 'riscv-for-linus-5.15-mw1' of ↵Linus Torvalds10-15/+22
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - A pair of defconfig additions, for NVMe and the EFI filesystem localization options. - A larger address space for stack randomization. - A cleanup to our install rules. - A DTS update for the Microchip Icicle board, to fix the serial console. - Support for build-time table sorting, which allows us to have __ex_table read-only. * tag 'riscv-for-linus-5.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Move EXCEPTION_TABLE to RO_DATA segment riscv: Enable BUILDTIME_TABLE_SORT riscv: dts: microchip: mpfs-icicle: Fix serial console riscv: move the (z)install rules to arch/riscv/Makefile riscv: Improve stack randomisation on RV64 riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1 riscv: defconfig: enable BLK_DEV_NVME
2021-09-12Merge branch 'for-5.15' of ↵Linus Torvalds2-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux Pull coccinelle updates from Julia Lawall: "These changes update some existing semantic patches with respect to some recent changes in the kernel. Specifically, the change to kvmalloc.cocci searches for kfree_sensitive rather than kzfree, and the change to use_after_iter.cocci adds list_entry_is_head as a valid use of a list iterator index variable after the end of the loop" * 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux: scripts: coccinelle: allow list_entry_is_head() to use pos coccinelle: api: rename kzfree to kfree_sensitive
2021-09-11tools headers UAPI: Update tools's copy of drm.h headersArnaldo Carvalho de Melo1-2/+12
Picking the changes from: 17ce9c61c71cbc0d ("drm: document DRM_IOCTL_MODE_RMFB") Doesn't result in any tooling changes: $ tools/perf/trace/beauty/drm_ioctl.sh > before $ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h $ tools/perf/trace/beauty/drm_ioctl.sh > after $ diff -u before after Silencing these perf build warnings: Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h' diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h Cc: Simon Ser <contact@emersion.fr> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-11tools headers UAPI: Sync drm/i915_drm.h with the kernel sourcesArnaldo Carvalho de Melo1-81/+417
To pick the changes in: b65a9489730a2494 ("drm/i915/userptr: Probe existence of backing struct pages upon creation") ee242ca704d38699 ("drm/i915/guc: Implement GuC priority management") 81340cf3bddded4f ("drm/i915/uapi: reject set_domain for discrete") 7961c5b60f23dff5 ("drm/i915: Add TTM offset argument to mmap.") aef7b67a79564f6c ("drm/i915/uapi: convert drm_i915_gem_userptr to kernel doc") e7737b67ab46ee0e ("drm/i915/uapi: reject caching ioctls for discrete") 3aa8c57fe25a9247 ("drm/i915/uapi: convert drm_i915_gem_set_domain to kernel doc") 289f5a72009b8f67 ("drm/i915/uapi: convert drm_i915_gem_caching to kernel doc") 4a766ae40ec83301 ("drm/i915: Drop the CONTEXT_CLONE API (v2)") 6ff6d61dd2a943bd ("drm/i915: Drop I915_CONTEXT_PARAM_NO_ZEROMAP") fe4751c3d513ff4f ("drm/i915: Drop I915_CONTEXT_PARAM_RINGSIZE") 577729533cdc4e37 ("drm/i915: Document the Virtual Engine uAPI") c649432e86ca677d ("drm/i915: Fix busy ioctl commentary") That doesn't result in any changes to tooling as no new ioctl were added (at least not perceived by tools/perf/trace/beauty/drm_ioctl.sh). Addressing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h' diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-11tools headers UAPI: Sync linux/fs.h with the kernel sourcesArnaldo Carvalho de Melo1-0/+1
To pick the change in: 7957d93bf32bc211 ("block: add ioctl to read the disk sequence number") It adds a new ioctl, but we are still not using that to generate tables for 'perf trace', so no changes in tooling. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h' diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h Cc: Jens Axboe <axboe@kernel.dk> Cc: Matteo Croce <mcroce@microsoft.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-11tools headers UAPI: Sync linux/in.h copy with the kernel sourcesArnaldo Carvalho de Melo1-10/+32
To pick the changes in: db243b796439c0ca ("net/ipv4/ipv6: Replace one-element arraya with flexible-array members") 2d3e5caf96b9449a ("net/ipv4: Replace one-element array with flexible-array member") That don't result in any change in tooling, the structs changed remains with the same layout. This addresses this build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h' diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h Cc: David S. Miller <davem@davemloft.net> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-11perf tools: Add an option to build without libbfdIan Rogers1-22/+25
Some distributions, like debian, don't link perf with libbfd. Add a build flag to make this configuration buildable and testable. This was inspired by: https://lore.kernel.org/linux-perf-users/20210910102307.2055484-1-tonyg@leastfixedpoint.com/T/#u Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: tony garnock-jones <tonyg@leastfixedpoint.com> Link: http://lore.kernel.org/lkml/20210910225756.729087-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-11perf tools: Allow build-id with trailing zerosNamhyung Kim1-0/+10
Currently perf saves a build-id with size but old versions assumes the size of 20. In case the build-id is less than 20 (like for MD5), it'd fill the rest with 0s. I saw a problem when old version of perf record saved a binary in the build-id cache and new version of perf reads the data. The symbols should be read from the build-id cache (as the path no longer has the same binary) but it failed due to mismatch in the build-id. symsrc__init: build id mismatch for /home/namhyung/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf. The build-id event in the data has 20 byte build-ids, but it saw a different size (16) when it reads the build-id of the elf file in the build-id cache. $ readelf -n ~/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf Displaying notes found in: .note.gnu.build-id Owner Data size Description GNU 0x00000010 NT_GNU_BUILD_ID (unique build ID bitstring) Build ID: 53e4c2f42a4c61a2d632d92a72afa08f Let's fix this by allowing trailing zeros if the size is different. Fixes: 39be8d0115b321ed ("perf tools: Pass build_id object to dso__build_id_equal()") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210910224630.1084877-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-11perf tools: Fix hybrid config terms list corruptionAdrian Hunter2-9/+27
A config terms list was spliced twice, resulting in a never-ending loop when the list was traversed. Fix by using list_splice_init() and copying and freeing the lists as necessary. This patch also depends on patch "perf tools: Factor out copy_config_terms() and free_config_terms()" Example on ADL: Before: # perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname & # jobs [1]+ Running perf record -e "{intel_pt//,cycles/aux-sample-size=4096/pp}" uname # perf top -E 10 PerfTop: 4071 irqs/sec kernel: 6.9% exact: 100.0% lost: 0/0 drop: 0/0 [4000Hz cycles], (all, 24 CPUs) --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 97.60% perf [.] __evsel__get_config_term 0.25% [kernel] [k] kallsyms_expand_symbol.constprop.13 0.24% perf [.] kallsyms__parse 0.15% [kernel] [k] _raw_spin_lock 0.14% [kernel] [k] number 0.13% [kernel] [k] advance_transaction 0.08% [kernel] [k] format_decode 0.08% perf [.] map__process_kallsym_symbol 0.08% perf [.] rb_insert_color 0.08% [kernel] [k] vsnprintf exiting. # kill %1 After: # perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname & Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.060 MB perf.data ] # perf script | head perf-exec 604 [001] 1827.312293: psb: psb offs: 0 ffffffffb8415e87 pt_config_start+0x37 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856a3bd event_sched_in.isra.133+0xfd ([kernel.kallsyms]) => ffffffffb856a9a0 perf_pmu_nop_void+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856b10e merge_sched_in+0x26e ([kernel.kallsyms]) => ffffffffb856a2c0 event_sched_in.isra.133+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856a45d event_sched_in.isra.133+0x19d ([kernel.kallsyms]) => ffffffffb8568b80 perf_event_set_state.part.61+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb8568b86 perf_event_set_state.part.61+0x6 ([kernel.kallsyms]) => ffffffffb85662a0 perf_event_update_time+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856a35c event_sched_in.isra.133+0x9c ([kernel.kallsyms]) => ffffffffb8567610 perf_log_itrace_start+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb856a377 event_sched_in.isra.133+0xb7 ([kernel.kallsyms]) => ffffffffb8403b40 x86_pmu_add+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb8403b86 x86_pmu_add+0x46 ([kernel.kallsyms]) => ffffffffb8403940 collect_events+0x0 ([kernel.kallsyms]) perf-exec 604 1827.312293: 1 branches: ffffffffb8403a7b collect_events+0x13b ([kernel.kallsyms]) => ffffffffb8402cd0 collect_event+0x0 ([kernel.kallsyms]) Fixes: 30def61f64bac5 ("perf parse-events Create two hybrid cache events") Fixes: 94da591b1c7913 ("perf parse-events Create two hybrid raw events") Fixes: 9cbfa2f64c04d9 ("perf parse-events Create two hybrid hardware events") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Link: https //lore.kernel.org/r/20210909125508.28693-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-13 06:39:23 +0300