summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-09-10arm64: dts: rockchip: Add PCIe 2 nodes to quartz64-bNicolas Frattaroli1-0/+34
This adds the regulator node to the quartz64-b device tree, and enables the PCIe 2 controller and combphy for it. Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Link: https://lore.kernel.org/r/20220718033145.792657-1-frattaroli.nicolas@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-10ARM: dts: rockchip: restyle emac nodesJohan Jonker7-36/+51
The emac_rockchip.txt file is converted to YAML. Phy nodes are now a subnode of mdio, so restyle the emac nodes of rk3036/rk3066/rk3188. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20220603163539.537-3-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-10ARM: dts: rockchip: fix rk3036 emac node compatible stringJohan Jonker1-1/+1
The Linux kernel has no logic to decide which driver to probe first. To prevent race conditions remove the rk3036 emac node fall back compatible string. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20220603163539.537-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-09arm64: dts: rockchip: add Anbernic RG353P and RG503Chris Morgan4-0/+1014
Anbernic RG353P and RG503 are both RK3566 based handheld gaming devices from Anbernic. Both devices have: - 2 SDMMC slots. - A Realtek rtl8821cs WiFi/Bluetooth adapter. - A mini HDMI port. - A USB C host port and a USB C otg port (currently only working as device). - Multiple GPIO buttons and a single ADC button. - Dual analog joysticks controlled via a GPIO mux. - A headphone jack with amplified stereo speakers via a SGM4865 amp. - A PWM based vibrator for force feedback. The RG353P has: - 2GB LPDDR4 RAM. - A 32GB eMMC. - A 3.5 inch 640x480 4-lane DSI panel of unknown origin with an i2c controlled touchscreen (touchscreen is a Hynitron CST340). The RG503 has: - 1GB LPDDR4 RAM. - A 5 inch 960x544 AMOLED 2-lane DSI/DBI panel manufactured by Samsung with part number ams495qa04. Data for this panel is provided via the DSI interface, however commands are sent via a 9-bit 3-wire SPI interface. The MISO pin of SPI3 of the SOC is wired to the input of the panel, so it must be bitbanged. This devicetree enables the following hardware: - HDMI (plus audio). - Analog audio, including speakers. - All buttons. - All SDMMC/eMMC/SDIO controllers. - The ADC joysticks (note a pending patch is required to use them). - WiFi/Bluetooth (note out of tree drivers are required). - The PWM based vibrator motor. The following hardware is not enabled: - The display panels (drivers are being written and there are issues with the upstream DSI and VOP2 subsystems). - Battery (driver pending). - Touchscreen on the RG353P (note the i2c2 bus is enabled for it). Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20220906210324.28986-4-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-09dt-bindings: arm: rockchip: Add Anbernic RG353P and RG503Chris Morgan1-0/+10
Add entry for the Anbernic RG353P and RG503 handheld devices. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220906210324.28986-3-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-09dt-bindings: vendor-prefixes: add AnbernicChris Morgan1-0/+2
Anbernic designs and manufactures portable gaming systems. https://anbernic.com/ Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220906210324.28986-2-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-09arm64: dts: rockchip: Add regulator suffix to BPI-R2-ProFrank Wunderlich1-6/+6
Add -regulator suffix to regulator names on Banana Pi R2 Pro board as discussed on Mailinglist Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220906164212.84835-1-linux@fw-web.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-09arm64: dts: rockchip: add LEDs for ROCK 4C+FUKAUMI Naoki1-0/+33
add support for user LEDs on Radxa ROCK 4C+ board. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://lore.kernel.org/r/20220908031726.1307105-2-naoki@radxa.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-09arm64: dts: rockchip: add LED for ROCK Pi 4A/B/C/A+/B+FUKAUMI Naoki1-0/+21
only user_led2 (blue) is supported. user_led1 (green) is not connected to any gpio so it cannot be controlled. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://lore.kernel.org/r/20220908031726.1307105-1-naoki@radxa.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-09arm64: dts: rockchip: add rk817 chg to Odroid Go AdvanceChris Morgan1-0/+26
Add the new rk817 charger driver to the Odroid Go Advance. Create a monitored battery node as well for the charger to use. All values from monitored battery are gathered from the BSP kernel for the Odroid Go Advance provided by HardKernel. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com> Link: https://lore.kernel.org/r/20220827021623.23829-5-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-09arm64: dts: ti: k3-am625-sk: Add epwm nodesGeorgi Vlaev1-0/+12
Add epwm nodes and mark them disabled, as they're not currently in use. Signed-off-by: Georgi Vlaev <g-vlaev@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20220531205229.198011-3-g-vlaev@ti.com
2022-09-09arm64: dts: ti: k3-am62-main: Add epwm nodesGeorgi Vlaev1-0/+33
Add the compatible DT nodes for all EPWM instances present in AM62 SoC. There is a total of 3 EPWM modules available, sharing the same K3 IP as in AM64 SoC. This also adds a required "ti,am62-epwm-tbclk" clock provider node for the EPWM time-base clock. Signed-off-by: Georgi Vlaev <g-vlaev@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20220531205229.198011-2-g-vlaev@ti.com
2022-09-09ARM: dts: r9a06g032-rzn1d400-db: Enable CAN1Biju Das1-0/+28
The CN10/CN11 on RZ/N1-EB board are headers to add jumpers to select which CAN interface to route to the real CAN connector J16. For a normal use case either we need to wire CAN1 or CAN2, but not both. This patch enables CAN1 and disables CAN2 by default assuming CN10/CN11 is wired for CAN1. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220902062752.56841-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-09-09ARM: dts: r9a06g032: Add CAN{0,1} nodesBiju Das1-0/+20
Add CAN{0,1} nodes to R9A06G032 (RZ/N1) SoC DTSI. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220830164518.1381632-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-09-09MAINTAINERS: Merge ARM/Renesas ARM64 and ARM/SH-Mobile ARM architecturesGeert Uytterhoeven1-24/+11
There is not much point in having separate entries for the ARM/Renesas ARM64 and ARM/SH-Mobile ARM architectures, as they have the same maintainers, use the same development collaboration infrastructure, and share many files. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/a869b8afdc47aa637ebeefcc1ca7bc61244f34b9.1660898008.git.geert+renesas@glider.be
2022-09-09Merge tag 'renesas-fixes-for-v6.0-tag1' into renesas-arm-dt-for-v6.1Geert Uytterhoeven1-1/+1
Renesas fixes for v6.0 - Fix the serial console on the Renesas White Hawk development board.
2022-09-08arm64: dts: allwinner: beelink-gs1: Enable GPU OPPClément Péron1-0/+1
Enable GPU OPP table for Beelink GS1. Signed-off-by: Clément Péron <peron.clem@gmail.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220906153034.153321-6-peron.clem@gmail.com
2022-09-08arm64: dts: allwinner: h6: Add GPU OPP tableClément Péron1-0/+87
Add an Operating Performance Points table for the GPU to enable Dynamic Voltage & Frequency Scaling on the H6. The voltage range is set with minimal voltage set to the target and the maximal voltage set to 1.2V. This allow DVFS framework to work properly on board with fixed regulator. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220906153034.153321-4-peron.clem@gmail.com
2022-09-08arm64: dts: allwinner: h6: Add cooling map for GPUClément Péron1-2/+49
Add a simple cooling map for the GPU. This cooling map come from the vendor kernel 4.9 with a 2°C hysteresis added. Signed-off-by: Clément Péron <peron.clem@gmail.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220906153034.153321-3-peron.clem@gmail.com
2022-09-08arm64: dts: allwinner: a100: Add I2C DMA requestsSamuel Holland1-0/+12
The I2C controllers in the A100 SoC are all connected to the DMA engine. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220830020824.62288-4-samuel@sholland.org
2022-09-08arm64: dts: allwinner: a100: Add device node for DMA controllerYangtao Li1-0/+12
The A100 SoC has a DMA controller that supports 8 DMA channels to and from various peripherals. Add a device node for it. Signed-off-by: Yangtao Li <frank@allwinnertech.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220830020824.62288-3-samuel@sholland.org
2022-09-08Merge tag 'amlogic-arm64-dt-for-v6.1' of ↵Arnd Bergmann9-336/+515
git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt Amlogic ARM64 DT changes for v6.1: - add Bindings & DT for Beelink GT1 Ultimate - Remove invalid 'enable-active-low' on SM1 & G12A boards - add Bindings & DT for the new JetHub D1p * tag 'amlogic-arm64-dt-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: dts: meson: add support for Beelink GT1 Ultimate dt-bindings: arm: amlogic: add Beelink GT1 Ultimate binding arm64: dts: meson-sm1-sei610: Remove 'enable-active-low' arm64: dts: meson-g12a: Remove 'enable-active-low' dt-bindings: arm: amlogic: add bindings for Jethub D1p (j110) arm64: dts: meson-axg: add support for JetHub D1p (j110) Link: https://lore.kernel.org/r/d0079686-40ae-58b2-e58b-c8dc6361d7f0@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-07dt-bindings: net: Add Tegra234 MGBEBhadram Varka1-0/+162
Add device-tree binding documentation for the Multi-Gigabit Ethernet (MGBE) controller found on NVIDIA Tegra234 SoCs. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Bhadram Varka <vbhadram@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-09-06arm64: dts: rockchip: Fix SD card controller probe on Pinephone ProOndrej Jirman1-2/+2
Voltage constraints on vccio_sd are invalid. They don't match the voltages that LDO9 can generate, and this causes rk808-regulator driver to fail to probe with -EINVAL when it tries to apply the constraints during boot. Fix the constraints to something that LDO9 can be actually configured for. Fixes: 78a21c7d5952 ("arm64: dts: rockchip: Add initial support for Pine64 PinePhone Pro") Signed-off-by: Ondrej Jirman <megi@xff.cz> Reviewed-by: Caleb Connolly <kc@postmarketos.org> Reviewed-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk> Tested-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk> Link: https://lore.kernel.org/r/20220904233652.3197885-1-megi@xff.cz Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-05arm64: dts: rockchip: rk3399: Radxa ROCK 4C+Jagan Teki2-0/+647
Add support for Radxa ROCK 4C+ SBC. Key differences of 4C+ compared to previous ROCK Pi 4. - Rockchip RK3399-T SoC - DP from 4C replaced with micro HDMI 2K@60fps - 4-lane MIPI DSI with 1920*1080 - RK817 Audio codec Also, an official naming convention from Radxa mention to remove Pi from board name, so this 4C+ is named as Radxa ROCK 4C+ not Radxa ROCK Pi 4C+. Signed-off-by: Stephen Chen <stephen@radxa.com> Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20220902065057.97425-3-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-05arm64: dts: rockchip: Add RK3399-T OPP tableJagan Teki1-0/+114
RK3399-T is down-clocked version of RK3399 SoC operated at 1.5GHz. Add CPU operating points table for it. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20220902065057.97425-2-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-05dt-bindings: arm: rockchip: Document Radxa ROCK 4C+Jagan Teki1-0/+5
Document the dt-bindings for Radxa ROCK 4C+ SBC. Key differences of 4C+ compared to previous ROCK Pi 4. - Rockchip RK3399-T SoC - DP from 4C replaced with micro HDMI 2K@60fps - 4-lane MIPI DSI with 1920*1080 - RK817 Audio codec Also, an official naming convention from Radxa mention to remove Pi from board name, so this 4C+ is named as Radxa ROCK 4C+ not Radxa ROCK Pi 4C+. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20220902065057.97425-1-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-05arm64: dts: meson: add support for Beelink GT1 UltimateChristian Hewitt2-0/+92
The Beelink GT1 Ultimate is based on the Amlogic S912 (Q200) reference design with the following specifications: - 3GB DDR3 RAM - 32GB eMMC - HDMI 2.1 video - S/PDIF optical output - 10/100/1000 Ethernet - AP6356S Wireless (802.11 a/b/g/n, BT 4.2) - 3x USB 2.0 ports - IR receiver - 1x micro SD card slot - 1x Power LED (white) - 1x Reset button (internal) Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220707093954.21716-2-christianshewitt@gmail.com
2022-09-05dt-bindings: arm: amlogic: add Beelink GT1 Ultimate bindingChristian Hewitt1-0/+1
Add the board binding for the Shenzen AZW (Beelink) GT1 Ultimate Android Set-Top Box device. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220707093954.21716-1-christianshewitt@gmail.com
2022-09-05ARM: dts: imx6: skov: migrate to resistive-adc-touchOleksij Rempel1-20/+45
Start to use more generic resistive-adc-touch node. ti,tsc2046 is an ADC controller used for resistive touchscreen. So, define it as ADC and attach resistive-adc-touch to it. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-05ARM: dts: imx6sx-udoo-neo: don't use multiple blank linesMarcel Ziswiler1-8/+6
This fixes the following warning: arch/arm/boot/dts/imx6sx-udoo-neo.dtsi:309: check: Please don't use multiple blank lines While at it, use tabs indent for some pinctrl entries. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-05ARM: dts: imx6sl: use tabs for code indentMarcel Ziswiler1-10/+10
This fixes the following error: arch/arm/boot/dts/imx6sl.dtsi:714: error: code indent should use tabs where possible Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-05ARM: dts: imx6sx: add missing properties for sramAlexander Stein1-0/+6
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning: sram@900000: '#address-cells' is a required property sram@900000: '#size-cells' is a required property sram@900000: 'ranges' is a required property Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-05ARM: dts: imx6sll: add missing properties for sramAlexander Stein1-0/+3
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning: sram@900000: '#address-cells' is a required property sram@900000: '#size-cells' is a required property sram@900000: 'ranges' is a required property Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-05ARM: dts: imx6sl: add missing properties for sramAlexander Stein1-0/+3
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning: sram@900000: '#address-cells' is a required property sram@900000: '#size-cells' is a required property sram@900000: 'ranges' is a required property Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-05ARM: dts: imx6qp: add missing properties for sramAlexander Stein1-0/+6
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning: sram@940000: '#address-cells' is a required property sram@940000: '#size-cells' is a required property sram@940000: 'ranges' is a required property Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-05ARM: dts: imx6dl: add missing properties for sramAlexander Stein1-0/+3
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning: sram@900000: '#address-cells' is a required property sram@900000: '#size-cells' is a required property sram@900000: 'ranges' is a required property Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-05ARM: dts: imx6q: add missing properties for sramAlexander Stein1-0/+3
All 3 properties are required by sram.yaml. Fixes the dtbs_check warning: sram@900000: '#address-cells' is a required property sram@900000: '#size-cells' is a required property sram@900000: 'ranges' is a required property Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-04arm64: dts: rockchip: Add initial support for Pine64 PinePhone ProMartijn Braam2-0/+399
This is a basic DT containing regulators and UART, intended to be a base that myself and others can add additional nodes in future patches. Tested to work: booting from eMMC/SD, output over UART. https://wiki.pine64.org/wiki/PinePhone_Pro This is derived from the community pine64-org repo[0] with fixes from https://megous.com/git/linux. 0. https://gitlab.com/pine64-org/linux/-/commit/261d3b5f8ac503f97da810986d1d6422430c8531 Signed-off-by: Martijn Braam <martijn@brixit.nl> Co-developed-by: Kamil Trzciński <ayufan@ayufan.eu> [no SoB, but Kamil is happy for this patch to be submitted] Co-developed-by: Ondrej Jirman <megi@xff.cz> Signed-off-by: Ondrej Jirman <megi@xff.cz> Co-developed-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk> Signed-off-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk> Reviewed-by: Caleb Connolly <kc@postmarketos.org> Reviewed-by: Nícolas F. R. A. Prado <n@nfraprado.net> Tested-by: Nícolas F. R. A. Prado <n@nfraprado.net> Link: https://lore.kernel.org/r/20220829050040.17330-2-tom@tom-fitzhenry.me.uk Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-04dt-bindings: arm: rockchip: Add PinePhone Pro bindingsTom Fitzhenry1-0/+5
Document board compatible names for Pine64 PinePhonePro. https://wiki.pine64.org/wiki/PinePhone_Pro Signed-off-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk> Reviewed-by: Caleb Connolly <kc@postmarketos.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220815123004.252014-2-tom@tom-fitzhenry.me.uk Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-04arm64: dts: rockchip: Add dts for a rk3399 based board EAIDK-610Andy Yan2-0/+940
EAIDK-610 is from OPEN AI LAB and popularly used by university students. Specification: - Rockchip RK3399 - LPDDR3 4GB - TF sd scard slot - eMMC - AP6255 for WiFi + BT - Gigabit ethernet - HDMI out - 40 pin header - USB 2.0 x 2 - USB 3.0 x 1 - USB 3.0 Type-C x 1 - 12V DC Power supply This patch is test on Armbain and Glodroid with HDMI/GPU/USB HOST/Type-C ADB/WIFI/BT. Signed-off-by: Andy Yan <andyshrk@163.com> Link: https://lore.kernel.org/r/20220709103016.2754044-1-andyshrk@163.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-04dt-bindings: arm: rockchip: Add EAIDK-610Andy Yan1-0/+5
EAIDK-610 is a rk3399 based board from OPEN AI LAB and popularly used by university students. Specification: - Rockchip RK3399 - LPDDR3 4GB - TF sd scard slot - eMMC - AP6255 for WiFi + BT - Gigabit ethernet - HDMI out - 40 pin header - USB 2.0 x 2 - USB 3.0 x 1 - USB 3.0 Type-C x 1 - 12V DC Power supply Signed-off-by: Andy Yan <andyshrk@163.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220709103001.2753992-1-andyshrk@163.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-04dt-bindings: vendor-prefixes: Add OPEN AI LABAndy Yan1-0/+2
Add vendor prefixes for OPEN AI LAB. Signed-off-by: Andy Yan <andyshrk@163.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220709102942.2753939-1-andyshrk@163.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-04arm64: dts: rockchip: add csi dphy node to rk356xMichael Riesch1-0/+12
Add the MIPI CSI DPHY node to the RK356x device tree. Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220720091527.1270365-4-michael.riesch@wolfvision.net Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-04arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-ProFrank Wunderlich1-0/+117
Add Nodes to Bananapi-R2-Pro board to support PCIe v3 and set PCIe related regulators to always on. Suggested-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20220825193836.54262-6-linux@fw-web.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-04arm64: dts: rockchip: Add PCIe v3 nodes to rk3568Frank Wunderlich1-0/+122
Add nodes to rk356x devicetree to support PCIe v3. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20220825193836.54262-5-linux@fw-web.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-03ARM: dts: imx7ulp: Add IPG clock for lpi2cPeng Fan1-4/+6
LPI2C requires two clocks, add the missed IPG clock. Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-03ARM: dts: imx7ulp: update the LPI2C clock-namesPeng Fan1-2/+2
The clock name should be per clock, not ipg clock. Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-03ARM: dts: vf610: ddr pinmuxMarcel Ziswiler1-0/+50
Add DDR pinmux which may be used in U-Boot after synchronising all them device trees (and includes) from Linux. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-02Merge tag 'renesas-dt-bindings-for-v6.1-tag1' of ↵Arnd Bergmann2-3/+17
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas DT binding updates for v6.1 - Document support for the R-Car H3Ne-1.7G SoC on the Salvator-XS and ULCB development boards, - Document system controller support for the RZ/Five SoC, - Document support for the R-Car V3H2 SoC and the Condor-I development board. * tag 'renesas-dt-bindings-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: dt-bindings: arm: renesas: Document Renesas R-Car V3H2 SoC and board dt-bindings: soc: renesas: renesas,rzg2l-sysc: Document RZ/Five SoC dt-bindings: arm: renesas: Document R-Car H3Ne-1.7G SoC and boards Link: https://lore.kernel.org/r/cover.1662111137.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 13:23:20 +0300