summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-07-04pinctrl: renesas: rzg2l: Clean up and refactor OEN read/write functionsPaul Barker1-49/+36
The variable naming in the various OEN functions has been confusing. We were passing the _pin & bit variables from rzg2l_pinctrl_pinconf_get() and rzg2l_pinctrl_pinconf_set() as the offset & pin argument to the oen_read() and oen_write() functions. This doesn't make sense, the first of these isn't actually an offset and the second is not needed for RZ/V2H but leads to confusion with the bit variable used within these functions. To tidy this up, instead pass the _pin variable directly to the oen_read() and oen_write() functions with consistent naming. Then rzg3s_read_oen() and rzg3s_write_oen() can use macros to get the port and pin numbers it needs. Instead of passing the pin capabilities into oen_read() and oen_write(), check that the pin supports OEN before calling these functions. Also, merge rzg3s_oen_is_supported() into rzg3s_pin_to_oen_bit() to give a single translation function which returns an error if the pin doesn't support OEN. While we're here, remove an unnecessary branch and clarify the variable naming. Lastly, check that we are not dealing with a dedicated pin before calling RZG2L_PIN_ID_TO_{PORT,PIN}(). Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20240625200316.4282-3-paul.barker.ct@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-07-04pinctrl: renesas: rzg2l: Clarify OEN read/write supportPaul Barker1-14/+14
We currently support OEN read/write for the RZ/G3S SoC but not the RZ/G2L SoC family (consisting of RZ/G2L, RZ/G2LC, RZ/G2UL, RZ/V2L & RZ/Five). The appropriate functions are renamed to clarify this and to match the callback names. We should also only set the oen_read and oen_write function pointers for the devices which support these operations. This requires us to check that these function pointers are valid before calling them. Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20240625200316.4282-2-paul.barker.ct@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-07-01pinctrl: renesas: r8a779h0: Remove unneeded separatorsGeert Uytterhoeven1-21/+9
Usually there are no separators between alternate functions. Remove them to increase uniformity. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/1fcd4f8734d063c9a691d9ab8ca0543892eb8388.1718378979.git.geert+renesas@glider.be
2024-07-01pinctrl: renesas: r8a779g0: Add INTC-EX pins, groups, and functionGeert Uytterhoeven1-0/+112
Add pins, groups, and function for the Interrupt Controller for External Devices (INTC-EX) on the Renesas R-Car V4H (R8A779G0) SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/9c33c36d13a5e38d79fa53085339b14631888b50.1718378943.git.geert+renesas@glider.be
2024-07-01pinctrl: renesas: r8a779g0: Remove unneeded separatorsGeert Uytterhoeven1-4/+2
Usually there are no separators between alternate functions. Remove them to increase uniformity. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/2375711d5edd03a209b4ed996f136e1f3c649773.1718378859.git.geert+renesas@glider.be
2024-07-01pinctrl: renesas: r8a779h0: Add AVB MII pins and groupsGeert Uytterhoeven1-0/+52
EtherAVB instances 0 and 1 support both RGMII and MII interfaces. Add the missing pins and groups for MII. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/4a0a12227f2145ef53b18bc08f45b19dcd745fc6.1718378739.git.geert+renesas@glider.be
2024-07-01pinctrl: renesas: r8a779g0: Fix TPU suffixesGeert Uytterhoeven1-65/+63
The Timer Pulse Unit channels have two alternate pin groups: "tpu_to[0-3]" and "tpu_to[0-3]_a". Increase uniformity by adopting R-Car V4M naming: - Rename "tpu_to[0-3]_a" to "tpu_to[0-3]_b", - Rename "tpu_to[0-3]" to "tpu_to[0-3]_a", Fixes: ad9bb2fec66262b0 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support") Fixes: 050442ae4c74f830 ("pinctrl: renesas: r8a779g0: Add pins, groups and functions") Fixes: 85a9cbe4c57bb958 ("pinctrl: renesas: r8a779g0: Add missing TPU0TOx_A") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/0dd9428bc24e97e1001ed3976b1cb98966f5e7e3.1717754960.git.geert+renesas@glider.be
2024-07-01pinctrl: renesas: r8a779g0: Fix TCLK suffixesGeert Uytterhoeven1-22/+22
The Pin Multiplex attachment in Rev.1.10 of the R-Car V4H Series Hardware User's Manual still has two alternate pins named both TCLK3 and TCLK4. To differentiate, the pin control driver uses "TCLK[34]" and "TCLK[34]_X". In addition, there are alternate pins without suffix, and with an "_A" or "_B" suffix. Increase uniformity by adopting R-Car V4M naming: - Rename "TCLK2_B" to "TCLK2_C", - Rename "TCLK[12]_A" to "TCLK[12]_B", - Rename "TCLK[12]" to "TCLK[12]_A", - Rename "TCLK[34]_A" to "TCLK[34]_C", - Rename "TCLK[34]_X" to "TCLK[34]_A", - Rename "TCLK[34]" to "TCLK[34]_B". Fixes: ad9bb2fec66262b0 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support") Fixes: 0df46188a58895e1 ("pinctrl: renesas: r8a779g0: Add missing TCLKx_A/TCLKx_B/TCLKx_X") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/2845ff1f8fe1fd8d23d2f307ad5e8eb8243da608.1717754960.git.geert+renesas@glider.be
2024-07-01pinctrl: renesas: r8a779g0: FIX PWM suffixesGeert Uytterhoeven1-40/+36
PWM channels 0, 2, 8, and 9 do not have alternate pins. Remove their "_a" or "_b" suffixes to increase uniformity. Fixes: c606c2fde2330547 ("pinctrl: renesas: r8a779g0: Add missing PWM") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/abb748e6e1e4e7d78beac7d96e7a0a3481b32e75.1717754960.git.geert+renesas@glider.be
2024-07-01pinctrl: renesas: r8a779g0: Fix IRQ suffixesGeert Uytterhoeven1-18/+18
The suffixes of the IRQ identifiers for external interrupts 0-3 are inconsistent: - "IRQ0" and "IRQ0_A", - "IRQ1" and "IRQ1_A", - "IRQ2" and "IRQ2_A", - "IRQ3" and "IRQ3_B". The suffixes for external interrupts 4 and 5 do follow conventional naming: - "IRQ4A" and IRQ4_B", - "IRQ5". Fix this by adopting R-Car V4M naming: - Rename "IRQ[0-2]_A" to "IRQ[0-2]_B", - Rename "IRQ[0-3]" to "IRQ[0-3]_A". Fixes: ad9bb2fec66262b0 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support") Fixes: 1b23d8a478bea9d1 ("pinctrl: renesas: r8a779g0: Add missing IRQx_A/IRQx_B") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/8ce9baf0a0f9346544a3ac801fd962c7c12fd247.1717754960.git.geert+renesas@glider.be
2024-07-01pinctrl: renesas: r8a779g0: Fix (H)SCIF3 suffixesGeert Uytterhoeven1-98/+94
(H)SCIF instance 3 has two alternate pin groups: "hscif3" and "hscif3_a", resp. "scif3" and "scif3_a", but the actual meanings of the pins within the groups do not match. Increase uniformity by adopting R-Car V4M naming: - Rename "hscif3_a" to "hscif3_b", - Rename "hscif3" to "hscif3_a", - Rename "scif3" to "scif3_b". While at it, remove unneeded separators. Fixes: ad9bb2fec66262b0 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support") Fixes: 050442ae4c74f830 ("pinctrl: renesas: r8a779g0: Add pins, groups and functions") Fixes: 213b713255defaa6 ("pinctrl: renesas: r8a779g0: Add missing HSCIF3_A") Fixes: 49e4697656bdd1cd ("pinctrl: renesas: r8a779g0: Add missing SCIF3") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/61fdde58e369e8070ffd3c5811c089e6219c7ecc.1717754960.git.geert+renesas@glider.be
2024-07-01pinctrl: renesas: r8a779g0: Fix (H)SCIF1 suffixesGeert Uytterhoeven1-106/+102
The Pin Multiplex attachment in Rev.1.10 of the R-Car V4H Series Hardware User's Manual still has two alternate pin groups (GP0_14-18 and GP1_6-10) each named both HSCIF1 and SCIF1. To differentiate, the pin control driver uses "(h)scif1" and "(h)scif1_x", which were considered temporary names until the conflict was sorted out. Fix this by adopting R-Car V4M naming: - Rename "(h)scif1" to "(h)scif1_a", - Rename "(h)scif1_x" to "(h)scif1_b". Adopt the R-Car V4M naming "(h)scif1_a" and "(h)scif1_b" to increase uniformity. While at it, remove unneeded separators. Fixes: ad9bb2fec66262b0 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support") Fixes: 050442ae4c74f830 ("pinctrl: renesas: r8a779g0: Add pins, groups and functions") Fixes: cf4f7891847bc558 ("pinctrl: renesas: r8a779g0: Add missing HSCIF1_X") Fixes: 9c151c2be92becf2 ("pinctrl: renesas: r8a779g0: Add missing SCIF1_X") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/5009130d1867e12abf9b231c8838fd05e2b28bee.1717754960.git.geert+renesas@glider.be
2024-07-01pinctrl: renesas: r8a779g0: Fix FXR_TXEN[AB] suffixesGeert Uytterhoeven1-10/+10
The Pin Multiplex attachment in Rev.1.10 of the R-Car V4H Series Hardware User's Manual still has two alternate pins named both "FXR_TXEN[AB]". To differentiate, the pin control driver uses "FXR_TXEN[AB]" and "FXR_TXEN[AB]_X", which were considered temporary names until the conflict was sorted out. Fix this by adopting R-Car V4M naming: - Rename "FXR_TXEN[AB]" to "FXR_TXEN[AB]_A", - Rename "FXR_TXEN[AB]_X" to "FXR_TXEN[AB]_B". Fixes: ad9bb2fec66262b0 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support") Fixes: 1c2646b5cebfff07 ("pinctrl: renesas: r8a779g0: Add missing FlexRay") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/5e1e9abb46c311d4c54450d991072d6d0e66f14c.1717754960.git.geert+renesas@glider.be
2024-07-01pinctrl: renesas: r8a779g0: Fix CANFD5 suffixGeert Uytterhoeven1-13/+11
CAN-FD instance 5 has two alternate pin groups: "canfd5" and "canfd5_b". Rename the former to "canfd5_a" to increase uniformity. While at it, remove the unneeded separator. Fixes: ad9bb2fec66262b0 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support") Fixes: 050442ae4c74f830 ("pinctrl: renesas: r8a779g0: Add pins, groups and functions") Fixes: c2b4b2cd632d17e7 ("pinctrl: renesas: r8a779g0: Add missing CANFD5_B") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/10b22d54086ed11cdfeb0004583029ccf249bdb9.1717754960.git.geert+renesas@glider.be
2024-07-01pinctrl: renesas: sh73a0: Use rdev_get_drvdata()Michał Mirosław1-2/+2
Replace `reg_data` access with the official wrapper. The field is going away soon. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/bb6b85722d80d665779e3043d1499c4fc38f0ff3.1714562004.git.mirq-linux@rere.qmqm.pl Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-06-24pinctrl: renesas: rzg2l: Reorganize variable configuration macroLad Prabhakar1-12/+17
The `PIN_CFG_VARIABLE` macro did not indicate the capabilities of a pin but served as a flag indicating that the pins of a port have different capabilities. To better reflect its purpose, move the `PIN_CFG_VARIABLE` macro beside `RZG2L_SINGLE_PIN` and rename it to `RZG2L_VARIABLE_CFG`. Additionally, introduce new macros for packing variable port configurations: - `RZG2L_GPIO_PORT_PACK_VARIABLE(n, a)`: Combines `RZG2L_VARIABLE_CFG` with `RZG2L_GPIO_PORT_PACK` to handle variable pin configurations for a packed port. - `RZG2L_GPIO_PORT_SPARSE_PACK_VARIABLE(m, a)`: Combines `RZG2L_VARIABLE_CFG` with `RZG2L_GPIO_PORT_SPARSE_PACK` to handle variable pin configurations for a sparse port. Due to the above change the configuration macros have been reorganized as follows: - Shift the bit positions of `PIN_CFG_NOGPIO_INT`, `PIN_CFG_NOD`, `PIN_CFG_SMT`, `PIN_CFG_ELC`, and `PIN_CFG_IOLH_RZV2H` down by one to accommodate the removal of `PIN_CFG_VARIABLE`. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20240618174831.415583-5-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-06-24pinctrl: renesas: rzg2l: Move RZG2L_SINGLE_PIN definition to top of the fileLad Prabhakar1-7/+7
Define `RZG2L_SINGLE_PIN` at the top of the file to clarify its use for dedicated pins for improved readability. While at it update the comment for `RZG2L_SINGLE_PIN_PACK` macro and place it just above the macro for clarity. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20240618174831.415583-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-06-24pinctrl: renesas: rzg2l: Adjust bit masks for PIN_CFG_VARIABLE to use BIT(62)Lad Prabhakar1-2/+2
Shift the bit masks for `PIN_CFG_PIN_MAP_MASK` and `PIN_CFG_PIN_REG_MASK`, to accommodate `PIN_CFG_VARIABLE` using `BIT(62)`. Previously, these bit masks were placed higher up in the bit range, which did not leave room for `PIN_CFG_VARIABLE` at `BIT(62)`. By adjusting these masks, we ensure that `PIN_CFG_VARIABLE` can occupy `BIT(62)` without any conflicts. The updated masks are now: - `PIN_CFG_PIN_MAP_MASK`: `GENMASK_ULL(61, 54)` (was `GENMASK_ULL(62, 55)`) - `PIN_CFG_PIN_REG_MASK`: `GENMASK_ULL(53, 46)` (was `GENMASK_ULL(54, 47)`) Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20240618174831.415583-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-06-24pinctrl: renesas: rzg2l: Update PIN_CFG_MASK() macro to be 32-bit wideLad Prabhakar1-6/+6
Modify the `PIN_CFG_MASK()` macro to be 32-bit wide. The current maximum value for `PIN_CFG_*` is `BIT(21)`, which fits within a 32-bit mask. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20240618174831.415583-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-06-11pinctrl: renesas: rzg2l: Add support for RZ/V2H SoCLad Prabhakar1-3/+371
Add pinctrl driver support for RZ/V2H(P) SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240530173857.164073-16-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-06-11dt-bindings: pinctrl: renesas: Document RZ/V2H(P) SoCLad Prabhakar1-4/+33
Add documentation for the pin controller found on the Renesas RZ/V2H(P) (R9A09G057) SoC. The RZ/V2H PFC varies slightly compared to the RZ/G2L family: - Additional bits need to be set during pinmuxing, - The GPIO pin count is different. Hence, a SoC-specific compatible string, 'renesas,r9a09g057-pinctrl', is added for the RZ/V2H(P) SoC. Also, add the 'renesas,output-impedance' property. The drive strength settings on RZ/V2H(P) depend on the different power rails coming out from the PMIC (connected via I2C). These power rails (required for drive strength) can be 1.2V, 1.8V, or 3.3V. Pins are grouped into 4 groups: Group 1: Impedance - 150/75/38/25 ohms (at 3.3V) - 130/65/33/22 ohms (at 1.8V) Group 2: Impedance - 50/40/33/25 ohms (at 1.8V) Group 3: Impedance - 150/75/37.5/25 ohms (at 3.3V) - 130/65/33/22 ohms (at 1.8V) Group 4: Impedance - 110/55/30/20 ohms (at 1.8V) - 150/75/38/25 ohms (at 1.2V) The 'renesas,output-impedance' property, as documented, can be [0, 1, 2, 3], these correspond to register bit values that can be set in the PFC_IOLH_mn register, which adjusts the drive strength value and is pin-dependent. As power rail information may not be available very early in the boot process, the 'renesas,output-impedance' property is added instead of reusing the 'output-impedance-ohms' property. Also, allow bias-disable, bias-pull-down and bias-pull-up properties as these can be used to configure the pins. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20240606085133.632307-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-06-11pinctrl: renesas: rzg2l: Acquire lock in rzg2l_pinctrl_pm_setup_pfc()Lad Prabhakar1-0/+3
To keep consistency with rzg2l_pinctrl_set_pfc_mode(), acquire the lock in rzg2l_pinctrl_pm_setup_pfc() during PFC setup. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S Link: https://lore.kernel.org/r/20240530173857.164073-15-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-06-11pinctrl: renesas: rzg2l: Add support for custom parametersLad Prabhakar1-0/+12
In preparation for passing custom params for RZ/V2H(P) SoC assign the custom params that are being passed via struct rzg2l_pinctrl_data. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240530173857.164073-14-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-06-11pinctrl: renesas: rzg2l: Pass pincontrol device to ↵Lad Prabhakar1-1/+1
pinconf_generic_parse_dt_config() Pass the pincontrol device pointer to pinconf_generic_parse_dt_config() in preparation for passing custom params. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S Link: https://lore.kernel.org/r/20240530173857.164073-13-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-06-11pinctrl: renesas: rzg2l: Add support for pull-up/downLad Prabhakar1-0/+72
Add support to configure bias-disable, bias-pull-up, and bias-pull-down properties of the pin. Two new function pointers, hw_to_bias_param() and bias_param_to_hw(), are introduced in the struct rzg2l_pinctrl_data to configure bias settings, as the values in the PUPD register differ when compared to the RZ/G2L family and the RZ/V2H(P) SoC. Value | RZ/G2L | RZ/V2H --------------------------------- 00b: | Bias Disabled | Pull up/down disabled 01b: | Pull-up | Pull up/down disabled 10b: | Pull-down | Pull-down 11b: | Prohibited | Pull-up Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240530173857.164073-12-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-06-11pinctrl: renesas: rzg2l: Add support to configure slew-rateLad Prabhakar1-0/+18
Add support to configure slew-rate property of the pin. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240530173857.164073-11-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-06-11pinctrl: renesas: rzg2l: Add function pointers for OEN register accessLad Prabhakar1-2/+10
Introduce function pointers oen_read() and oen_write(), in the struct rzg2l_pinctrl_data to facilitate reading and writing to the PFC_OEN register. On the RZ/V2H(P) SoC, unlocking the PWPR.REGWE_B bit before writing to the PFC_OEN register is necessary, and the PFC_OEN register has more bits compared to the RZ/G2L family. To handle these differences between RZ/G2L and RZ/V2H(P) and to reuse the existing code for RZ/V2H(P), these function pointers are introduced. Additionally, populate these function pointers with appropriate data for existing SoCs. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S Link: https://lore.kernel.org/r/20240530173857.164073-10-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-06-11pinctrl: renesas: rzg2l: Add function pointer for PMC register writeLad Prabhakar1-1/+10
Introduces pmc_writeb() function pointer, in the struct rzg2l_pinctrl_data to facilitate writing to the PMC register. On the RZ/V2H(P) SoC, unlocking the PWPR.REGWE_A bit before writing to PMC registers is required, whereas this is not the case for the existing RZ/G2L family. This addition enables the reuse of existing code for RZ/V2H(P). Additionally, populate this function pointer with appropriate data for existing SoCs. Note that this functionality is only handled in rzg2l_gpio_request(), as PMC unlock/lock during PFC setup will be taken care of in the pwpr_pfc_lock_unlock() function pointer. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S Link: https://lore.kernel.org/r/20240530173857.164073-9-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-06-11pinctrl: renesas: rzg2l: Add function pointer for PFC register lockingLad Prabhakar1-17/+27
On the RZ/G2L SoC, the PFCWE bit controls writing to PFC registers. However, on the RZ/V2H(P) SoC, the PFCWE (REGWE_A on RZ/V2H) bit controls writing to both PFC and PMC registers. Additionally, BIT(7) B0WI is undocumented for the PWPR register on RZ/V2H(P) SoC. To accommodate these differences across SoC variants, introduce the pwpr_pfc_lock_unlock() function pointer. Note, in rzg2l_pinctrl_set_pfc_mode() the pwpr_pfc_lock_unlock(.., false) is now called before PMC read/write and pwpr_pfc_lock_unlock(.., true) is now called after PMC read/write this is to keep changes minimal for RZ/V2H(P) SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S Link: https://lore.kernel.org/r/20240530173857.164073-8-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-06-11pinctrl: renesas: rzg2l: Validate power registers for SD and ETHLad Prabhakar1-4/+8
On RZ/V2H(P) SoC, the power registers for SD and ETH do not exist, resulting in invalid register offsets. Ensure that the register offsets are valid before any read/write operations are performed. If the power registers are not available, both SD and ETH will be set to '0'. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S Link: https://lore.kernel.org/r/20240530173857.164073-7-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-06-11pinctrl: renesas: rzg2l: Enable variable configuration for allLad Prabhakar1-3/+1
Enable parsing of variable configuration for all architectures. This prepares for adding support for the RZ/V2H SoC, which utilizes the ARM64 architecture and features port pins with variable configuration. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S Link: https://lore.kernel.org/r/20240530173857.164073-6-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-06-11pinctrl: renesas: rzg2l: Drop struct rzg2l_variable_pin_cfgLad Prabhakar1-133/+54
Drop the rzg2l_variable_pin_cfg struct and instead use the RZG2L_VARIABLE_PIN_CFG_PACK() macro for the variable pin configuration. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S Link: https://lore.kernel.org/r/20240530173857.164073-5-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-06-11pinctrl: renesas: rzg2l: Allow more bits for pin configurationLad Prabhakar1-13/+17
The pin configuration bits have been growing for every new SoCs being added for the pinctrl-rzg2l driver which would mean updating the macros every time for each new configuration. To avoid this allocate additional bits for pin configuration by relocating the known fixed bits to the very end of the configuration. Also update the size of 'cfg' to 'u64' to allow more configuration bits in the 'struct rzg2l_variable_pin_cfg'. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S Link: https://lore.kernel.org/r/20240530173857.164073-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-06-07pinctrl: renesas: rzn1: Use for_each_child_of_node_scoped()Geert Uytterhoeven1-2/+1
Use the scoped variant of for_each_child_of_node() to simplify the code. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/c0a28f466c42d5d59c7fadfa1fd05fd512d43b6f.1717060708.git.geert+renesas@glider.be
2024-05-28pinctrl: renesas: Use scope based of_node_put() cleanupsPeng Fan5-41/+17
Use scope based of_node_put() cleanup to simplify code. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240504-pinctrl-cleanup-v2-7-26c5f2dc1181@nxp.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-05-28dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Remove the check from the objectLad Prabhakar1-15/+0
Drop the bogus check from object as this didn't really add restriction check. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240423175900.702640-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-05-27pinctrl: renesas: rzg2l: Use spin_{lock,unlock}_irq{save,restore}Claudiu Beznea1-2/+2
On PREEMPT_RT kernels the spinlock_t maps to an rtmutex. Using raw_spin_lock_irqsave()/raw_spin_unlock_irqrestore() on &pctrl->lock.rlock breaks the PREEMPT_RT builds. To fix this use spin_lock_irqsave()/spin_unlock_irqrestore() on &pctrl->lock. Fixes: 02cd2d3be1c3 ("pinctrl: renesas: rzg2l: Configure the interrupt type on resume") Reported-by: Diederik de Haas <didi.debian@cknow.org> Closes: https://lore.kernel.org/all/131999629.KQPSlr0Zke@bagend Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240522055421.2842689-1-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-05-27Linux 6.10-rc1Linus Torvalds1-3/+3
2024-05-27mm: percpu: Include smp.h in alloc_tag.hKent Overstreet1-0/+1
percpu.h depends on smp.h, but doesn't include it directly because of circular header dependency issues; percpu.h is needed in a bunch of low level headers. This fixes a randconfig build error on mips: include/linux/alloc_tag.h: In function '__alloc_tag_ref_set': include/asm-generic/percpu.h:31:40: error: implicit declaration of function 'raw_smp_processor_id' [-Werror=implicit-function-declaration] Reported-by: kernel test robot <lkp@intel.com> Fixes: 24e44cc22aa3 ("mm: percpu: enable per-cpu allocation tagging") Closes: https://lore.kernel.org/oe-kbuild-all/202405210052.DIrMXJNz-lkp@intel.com/ Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-05-26Merge tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of ↵Linus Torvalds4-103/+68
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tool fix from Arnaldo Carvalho de Melo: "Revert a patch causing a regression. This made a simple 'perf record -e cycles:pp make -j199' stop working on the Ampere ARM64 system Linus uses to test ARM64 kernels". * tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"
2024-05-26Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"Arnaldo Carvalho de Melo4-103/+68
This reverts commit 617824a7f0f73e4de325cf8add58e55b28c12493. This made a simple 'perf record -e cycles:pp make -j199' stop working on the Ampere ARM64 system Linus uses to test ARM64 kernels, as discussed at length in the threads in the Link tags below. The fix provided by Ian wasn't acceptable and work to fix this will take time we don't have at this point, so lets revert this and work on it on the next devel cycle. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com> Cc: Ethan Adams <j.ethan.adams@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Tycho Andersen <tycho@tycho.pizza> Cc: Yang Jihong <yangjihong@bytedance.com> Link: https://lore.kernel.org/lkml/CAHk-=wi5Ri=yR2jBVk-4HzTzpoAWOgstr1LEvg_-OXtJvXXJOA@mail.gmail.com Link: https://lore.kernel.org/lkml/CAHk-=wiWvtFyedDNpoV7a8Fq_FpbB+F5KmWK2xPY3QoYseOf_A@mail.gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-05-26Merge tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds6-6/+34
Pull smb client fixes from Steve French: - two important netfs integration fixes - including for a data corruption and also fixes for multiple xfstests - reenable swap support over SMB3 * tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix missing set of remote_i_size cifs: Fix smb3_insert_range() to move the zero_point cifs: update internal version number smb3: reenable swapfiles over SMB3 mounts
2024-05-26Merge tag 'mm-hotfixes-stable-2024-05-25-09-13' of ↵Linus Torvalds13-69/+187
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "16 hotfixes, 11 of which are cc:stable. A few nilfs2 fixes, the remainder are for MM: a couple of selftests fixes, various singletons fixing various issues in various parts" * tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/ksm: fix possible UAF of stable_node mm/memory-failure: fix handling of dissolved but not taken off from buddy pages mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again nilfs2: fix potential hang in nilfs_detach_log_writer() nilfs2: fix unexpected freezing of nilfs_segctor_sync() nilfs2: fix use-after-free of timer for log writer thread selftests/mm: fix build warnings on ppc64 arm64: patching: fix handling of execmem addresses selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages selftests/mm: compaction_test: fix bogus test success on Aarch64 mailmap: update email address for Satya Priya mm/huge_memory: don't unpoison huge_zero_folio kasan, fortify: properly rename memintrinsics lib: add version into /proc/allocinfo output mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL
2024-05-26Merge tag 'irq-urgent-2024-05-25' of ↵Linus Torvalds3-12/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: - Fix x86 IRQ vector leak caused by a CPU offlining race - Fix build failure in the riscv-imsic irqchip driver caused by an API-change semantic conflict - Fix use-after-free in irq_find_at_or_after() * tag 'irq-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/irqdesc: Prevent use-after-free in irq_find_at_or_after() genirq/cpuhotplug, x86/vector: Prevent vector leak during CPU offline irqchip/riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict
2024-05-26Merge tag 'x86-urgent-2024-05-25' of ↵Linus Torvalds6-18/+67
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: - Fix regressions of the new x86 CPU VFM (vendor/family/model) enumeration/matching code - Fix crash kernel detection on buggy firmware with non-compliant ACPI MADT tables - Address Kconfig warning * tag 'x86-urgent-2024-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Fix x86_match_cpu() to match just X86_VENDOR_INTEL crypto: x86/aes-xts - switch to new Intel CPU model defines x86/topology: Handle bogus ACPI tables correctly x86/kconfig: Select ARCH_WANT_FRAME_POINTERS again when UNWINDER_FRAME_POINTER=y
2024-05-26Merge tag 'for-linus-6.10-1' of https://github.com/cminyard/linux-ipmiLinus Torvalds10-45/+35
Pull ipmi updates from Corey Minyard: "Mostly updates for deprecated interfaces, platform.remove and converting from a tasklet to a BH workqueue. Also use HAS_IOPORT for disabling inb()/outb()" * tag 'for-linus-6.10-1' of https://github.com/cminyard/linux-ipmi: ipmi: kcs_bmc_npcm7xx: Convert to platform remove callback returning void ipmi: kcs_bmc_aspeed: Convert to platform remove callback returning void ipmi: ipmi_ssif: Convert to platform remove callback returning void ipmi: ipmi_si_platform: Convert to platform remove callback returning void ipmi: ipmi_powernv: Convert to platform remove callback returning void ipmi: bt-bmc: Convert to platform remove callback returning void char: ipmi: handle HAS_IOPORT dependencies ipmi: Convert from tasklet to BH workqueue
2024-05-26Merge tag 'ceph-for-6.10-rc1' of https://github.com/ceph/ceph-clientLinus Torvalds6-19/+434
Pull ceph updates from Ilya Dryomov: "A series from Xiubo that adds support for additional access checks based on MDS auth caps which were recently made available to clients. This is needed to prevent scenarios where the MDS quietly discards updates that a UID-restricted client previously (wrongfully) acked to the user. Other than that, just a documentation fixup" * tag 'ceph-for-6.10-rc1' of https://github.com/ceph/ceph-client: doc: ceph: update userspace command to get CephFS metadata ceph: add CEPHFS_FEATURE_MDS_AUTH_CAPS_CHECK feature bit ceph: check the cephx mds auth access for async dirop ceph: check the cephx mds auth access for open ceph: check the cephx mds auth access for setattr ceph: add ceph_mds_check_access() helper ceph: save cap_auths in MDS client when session is opened
2024-05-26Merge tag 'ntfs3_for_6.10' of ↵Linus Torvalds13-154/+98
https://github.com/Paragon-Software-Group/linux-ntfs3 Pull ntfs3 updates from Konstantin Komarov: "Fixes: - reusing of the file index (could cause the file to be trimmed) - infinite dir enumeration - taking DOS names into account during link counting - le32_to_cpu conversion, 32 bit overflow, NULL check - some code was refactored Changes: - removed max link count info display during driver init Remove: - atomic_open has been removed for lack of use" * tag 'ntfs3_for_6.10' of https://github.com/Paragon-Software-Group/linux-ntfs3: fs/ntfs3: Break dir enumeration if directory contents error fs/ntfs3: Fix case when index is reused during tree transformation fs/ntfs3: Mark volume as dirty if xattr is broken fs/ntfs3: Always make file nonresident on fallocate call fs/ntfs3: Redesign ntfs_create_inode to return error code instead of inode fs/ntfs3: Use variable length array instead of fixed size fs/ntfs3: Use 64 bit variable to avoid 32 bit overflow fs/ntfs3: Check 'folio' pointer for NULL fs/ntfs3: Missed le32_to_cpu conversion fs/ntfs3: Remove max link count info display during driver init fs/ntfs3: Taking DOS names into account during link counting fs/ntfs3: remove atomic_open fs/ntfs3: use kcalloc() instead of kzalloc()
2024-05-26Merge tag '6.10-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds2-9/+18
Pull smb server fixes from Steve French: "Two ksmbd server fixes, both for stable" * tag '6.10-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: ignore trailing slashes in share paths ksmbd: avoid to send duplicate oplock break notifications
2024-05-25Merge tag 'rtc-6.10' of ↵Linus Torvalds29-250/+702
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "There is one new driver and then most of the changes are the device tree bindings conversions to yaml. New driver: - Epson RX8111 Drivers: - Many Device Tree bindings conversions to dtschema - pcf8563: wakeup-source support" * tag 'rtc-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: pcf8563: add wakeup-source support rtc: rx8111: handle VLOW flag rtc: rx8111: demote warnings to debug level rtc: rx6110: Constify struct regmap_config dt-bindings: rtc: convert trivial devices into dtschema dt-bindings: rtc: stmp3xxx-rtc: convert to dtschema dt-bindings: rtc: pxa-rtc: convert to dtschema rtc: Add driver for Epson RX8111 dt-bindings: rtc: Add Epson RX8111 rtc: mcp795: drop unneeded MODULE_ALIAS rtc: nuvoton: Modify part number value rtc: test: Split rtc unit test into slow and normal speed test dt-bindings: rtc: nxp,lpc1788-rtc: convert to dtschema dt-bindings: rtc: digicolor-rtc: move to trivial-rtc dt-bindings: rtc: alphascale,asm9260-rtc: convert to dtschema dt-bindings: rtc: armada-380-rtc: convert to dtschema rtc: cros-ec: provide ID table for avoiding fallback match
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 06:21:00 +0300