summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-01-24hwmon: (i5500_temp) New driver for the Intel 5500/5520/X58 chipsetsJean Delvare3-0/+212
The Intel 5500, 5520 and X58 chipsets embed a digital thermal sensor. This new driver supports it. Note that on many boards the sensor seems to be disabled and reports the minimum value (36.5 degrees Celsius) all the time. Signed-off-by: Jean Delvare <jdelvare@suse.de> Tested-by: Romain Dolbeau <romain@dolbeau.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2015-01-24amd-xgbe: Use proper Rx flow control registerLendacky, Thomas2-6/+7
Updated hardware documention shows the Rx flow control settings were moved from the Rx queue operation mode register to a new Rx queue flow control register. The old flow control settings are now reserved areas of the Rx queue operation mode register. Update the code to use the new register. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24i2c: s3c2410: fix ABBA deadlock by keeping clock preparedPaul Osmialowski1-6/+17
This patch solves deadlock between clock prepare mutex and regmap mutex reported by Tomasz Figa in [1] by implementing solution from [2]: "always leave the clock of the i2c controller in a prepared state". [1] https://lkml.org/lkml/2014/7/2/171 [2] https://lkml.org/lkml/2014/7/2/207 On each i2c transfer handled by s3c24xx_i2c_xfer(), clk_prepare_enable() was called, which calls clk_prepare() then clk_enable(). clk_prepare() takes prepare_lock mutex before proceeding. Note that i2c transfer functions are invoked from many places in kernel, typically with some other additional lock held. It may happen that function on CPU1 (e.g. regmap_update_bits()) has taken a mutex (i.e. regmap lock mutex) then it attempts i2c communication in order to proceed (so it needs to obtain clock related prepare_lock mutex during transfer preparation stage due to clk_prepare() call). At the same time other task on CPU0 wants to operate on clock (e.g. to (un)prepare clock for some other reason) so it has taken prepare_lock mutex. CPU0: CPU1: clk_disable_unused() regulator_disable() clk_prepare_lock() map->lock(map->lock_arg) regmap_read() s3c24xx_i2c_xfer() map->lock(map->lock_arg) clk_prepare_lock() Implemented solution from [2] leaves i2c clock prepared. Preparation is done in s3c24xx_i2c_probe() function. Without this patch, it is immediately unprepared by clk_disable_unprepare() call. I've replaced this call with clk_disable() and I've added clk_unprepare() call in s3c24xx_i2c_remove(). The s3c24xx_i2c_xfer() function now uses clk_enable() instead of clk_prepare_enable() (and clk_disable() instead of clk_unprepare_disable()). Signed-off-by: Paul Osmialowski <p.osmialowsk@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2015-01-24i2c: slave-eeprom: fix boundary check when using sysfsWolfram Sang1-2/+2
Due to a copy&paste error, the last byte of the shared memory was not accessible via sysfs. Reported-by: Debora Grosse <debora@mds.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-24i2c: st: Rename clock reference to something that existsLee Jones1-1/+1
CLK_S_ICN_REG_0 hasn't existed for a while now. This was renamed over a few commits, then finally removed in commit 5aa02b9 (ARM: STi: DT: STiH415: Remove unused CLK_S_ICN_REG_0 fixed clock). Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-01-24Merge branch 'for-linus' of ↵Linus Torvalds6-6/+17
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "We have a few fixes in my for-linus branch. Qu Wenruo's batch fix a regression between some our merge window pull and the inode_cache feature. The rest are smaller bugs" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: Don't call btrfs_start_transaction() on frozen fs to avoid deadlock. btrfs: Fix the bug that fs_info->pending_changes is never cleared. btrfs: fix state->private cast on 32 bit machines Btrfs: fix race deleting block group from space_info->ro_bgs list Btrfs: fix incorrect freeing in scrub_stripe btrfs: sync ioctl, handle errors after transaction start
2015-01-24xen-netback: always fully coalesce guest Rx packetsDavid Vrabel2-105/+3
Always fully coalesce guest Rx packets into the minimum number of ring slots. Reducing the number of slots per packet has significant performance benefits when receiving off-host traffic. Results from XenServer's performance benchmarks: Baseline Full coalesce Interhost VM receive 7.2 Gb/s 11 Gb/s Interhost aggregate 24 Gb/s 24 Gb/s Intrahost single stream 14 Gb/s 14 Gb/s Intrahost aggregate 34 Gb/s 34 Gb/s However, this can increase the number of grant ops per packet which decreases performance of backend (dom0) to VM traffic (by ~10%) /unless/ grant copy has been optimized for adjacent ops with the same source or destination (see "grant-table: defer releasing pages acquired in a grant copy"[1] expected in Xen 4.6). [1] http://lists.xen.org/archives/html/xen-devel/2015-01/msg01118.html Signed-off-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24Merge branch 'link_netns_advertise'David S. Miller8-1/+35
Nicolas Dichtel says: ==================== netns: advertise netns via netlink The first patch of the series fix a bug of the previous series (present in net-next only). The rest of the series adds an attribute to advertise the peer netns for rtnetlink messages where this information is needed by userland to be able to interpret fully the received message. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24vxlan: advertise netns of vxlan dev in fdb msgNicolas Dichtel3-0/+7
Netlink FDB messages are sent in the link netns. The header of these messages contains the ifindex (ndm_ifindex) of the netdevice, but this ifindex is unusable in case of x-netns vxlan. I named the new attribute NDA_NDM_IFINDEX_NETNSID, to avoid confusion with NDA_IFINDEX. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24veth: advertise link netns via netlinkNicolas Dichtel1-0/+9
Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24macvlan: advertise link netns via netlinkNicolas Dichtel1-0/+6
Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24vlan: advertise link netns via netlinkNicolas Dichtel1-0/+8
Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24ip6gretap: advertise link netns via netlinkNicolas Dichtel1-0/+1
Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is added to rtnetlink messages. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24rtnl: fix error path when adding an iface with a link netNicolas Dichtel1-1/+4
If an error occurs when the netdevice is moved to the link netns, a full cleanup must be done. Fixes: 317f4810e45e ("rtnl: allow to create device with IFLA_LINK_NETNSID set") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24act_connmark: Add missing dependency on NF_CONNTRACK_MARKThomas Graf1-0/+1
Depending on NETFILTER is not sufficient to ensure the presence of the 'mark' field in nf_conn, also needs to depend on NF_CONNTRACK_MARK. Fixes: 22a5dc ("net: sched: Introduce connmark action") Cc: Felix Fietkau <nbd@openwrt.org> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-24Merge tag 'platform-drivers-x86-v3.19-2' of ↵Linus Torvalds2-1109/+6
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull platform driver fix from Darren Hart: "Revert keyboard backlight sysfs support and documentation. The support for the dell-laptop keyboard backlight was flawed and the fix: https://lkml.org/lkml/2015/1/14/539 was more invasive that I felt comfortable sending at RC5. This series reverts the support for the dell-laptop keyboard backlight as well as the documentation for the newly created sysfs attributes. We'll get this implemented correctly for 3.20" * tag 'platform-drivers-x86-v3.19-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: Revert "platform: x86: dell-laptop: Add support for keyboard backlight" Revert "Documentation: Add entry for dell-laptop sysfs interface"
2015-01-24Merge tag 'pci-v3.19-fixes-1' of ↵Linus Torvalds17-81/+222
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "These are fixes for: - a resource management problem that causes a Radeon "Fatal error during GPU init" on machines where the BIOS programmed an invalid Root Port window. This was a regression in v3.16. - an Atheros AR93xx device that doesn't handle PCI bus resets correctly. This was a regression in v3.14. - an out-of-date email address" * tag 'pci-v3.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Update Richard Zhu's email address sparc/PCI: Clip bridge windows to fit in upstream windows powerpc/PCI: Clip bridge windows to fit in upstream windows parisc/PCI: Clip bridge windows to fit in upstream windows mn10300/PCI: Clip bridge windows to fit in upstream windows microblaze/PCI: Clip bridge windows to fit in upstream windows ia64/PCI: Clip bridge windows to fit in upstream windows frv/PCI: Clip bridge windows to fit in upstream windows alpha/PCI: Clip bridge windows to fit in upstream windows x86/PCI: Clip bridge windows to fit in upstream windows PCI: Add pci_claim_bridge_resource() to clip window if necessary PCI: Add pci_bus_clip_resource() to clip to fit upstream window PCI: Pass bridge device, not bus, when updating bridge windows PCI: Mark Atheros AR93xx to avoid bus reset PCI: Add flag for devices where we can't use bus reset
2015-01-24Merge tag 'devicetree-for-linus' of ↵Linus Torvalds11-23/+187
git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux Pull devicetree bug fixes and documentation updates from Grant Likely: "A few bugfixes for the new DT overlay feature, documentation updates, spelling corrections, and changes to MAINTAINERS. Nothing earth shattering here" * tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: of/unittest: Overlays with sub-devices tests of/platform: Handle of_populate drivers in notifier of/overlay: Do not generate duplicate nodes devicetree: document the "qemu" and "virtio" vendor prefixes devicetree: document ARM bindings for QEMU's Firmware Config interface Documentation: of: fix typo in graph bindings dma-mapping: fix debug print to display correct dma_pfn_offset of: replace Asahi Kasei Corp vendor prefix ARM: dt: GIC: Spelling s/specific/specifier/, s/flaggs/flags/ dt/bindings: arm-boards: Spelling s/pointong/pointing/ MAINTAINERS: Update DT website and git repository MAINTAINERS: drop DT regex matching on of_get_property and of_match_table
2015-01-24Merge tag 'imx-fixes-3.19-2' of ↵Olof Johansson1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "ARM: imx: fixes for 3.19, 2nd round" from Shawn Guo: The i.MX fixes for 3.19, 2nd round: - Correct pwm clock assignment in i.MX25 device tree to fix the broken pwm support on i.MX25 * tag 'imx-fixes-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx25: Fix PWM "per" clocks Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-24arm64: dts: add baud rate to Juno stdout-pathRobin Murphy1-1/+1
Without explicit command-line parameters, the Juno UART ends up running at 57600 baud in the kernel, which is at odds with the 115200 baud used by the rest of the firmware. Since commit 7914a7c5651a5161 now lets us fix this by specifying default options in stdout-path, do so. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-24Merge tag 'mvebu-fixes-3.19-4' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson1-0/+13
Merge "mvebu/fixes #3" from Andrew Lunn: mvebu fixes for 3.19. (Part 4) bus: mvebu-mbus: fix support of MBus window 13 * tag 'mvebu-fixes-3.19-4' of git://git.infradead.org/linux-mvebu: bus: mvebu-mbus: fix support of MBus window 13 ARM: mvebu: completely disable hardware I/O coherency Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-28/+19
Pull kvm fixes from Paolo Bonzini: "Three small fixes. Two for x86 and one avoids that sparse bails out" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: SYSENTER emulation is broken KVM: x86: Fix of previously incomplete fix for CVE-2014-8480 KVM: fix sparse warning in include/trace/events/kvm.h
2015-01-24Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds3-10/+20
Pull ARM fixes from Russell King: "Another round of small ARM fixes. restore_user_regs early stack deallocation is buggy in the presence of FIQs which switch to SVC mode, and could lead to corrupted registers being returned to a user process given an inopportune FIQ event. Another bug was spotted in the ARM perf code where it could lose track of perf counter overflows, leading to incorrect perf results. Lastly, a bug in arm_add_memory() was spotted where the memory sizes aren't properly rounded. As most people pass properly rounded sizes, this hasn't been noticed" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8292/1: mm: fix size rounding-down of arm_add_memory() function ARM: 8255/1: perf: Prevent wraparound during overflow ARM: 8266/1: Remove early stack deallocation from restore_user_regs
2015-01-24Merge tag 'arm64-fixes' of ↵Linus Torvalds3-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull two arm64 fixes from Will Deacon: "Arm64 fixes seem to come in pairs recently. We've got a fix for removing device-tree blobs when doing a make clean and another one addressing a missing include, which fixes build failures in -next for allmodconfig (spotted by Mark's buildbot). Summary from signed tag: - fix cleaning of .dtbs following directory restructuring - fix allmodconfig build breakage in -next due to missing include" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: dump: Fix implicit inclusion of definition for PCI_IOBASE arm64: Add dtb files to archclean rule
2015-01-23bcma: use standard bus scanning during early registerRafał Miłecki5-91/+15
Starting with kernel 3.19-rc1 early registration of bcma on MIPS is done a bit later, with memory allocator available. This allows us to simplify code by using standard bus scanning method. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23atmel: Remove open-coded and wrong strcasecmpRasmus Villemoes1-11/+1
The kernel's string library does in fact have strcasecmp, at least since ded220bd8f08 ("[STRING]: Move strcasecmp/strncasecmp to lib/string.c"). Moreover, this open-coded version is in fact wrong: If the strings only differ in their last character, a and b have already been incremented to point to the terminating NUL bytes, so they would wrongly be treated as equal. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23p54pci: add handling of signal caseNicholas Mc Guire1-2/+5
if(!wait_for_completion_interruptible_timeout(...)) only handles the timeout case - this patch adds handling the signal case the same as timeout. Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23p54: add handling of the signal caseNicholas Mc Guire1-3/+6
if(!wait_for_completion_interruptible_timeout(...)) only handles the timeout case - this patch adds handling the signal case the same as timeout. Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23ath5k: document a fall-through case in ath5k_hw_set_opmodeJohn Linville1-0/+1
Coverity: CID 114932 Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23ath9k_htc: remove dead code in error path of ath9k_htc_txcompletion_cbJohn Linville1-5/+1
This clause is conditioned on htc_hdr != NULL, but it will only be NULL when that check is reached. Coverity: CID 114318 Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23brcmfmac: Use put_unaligned_le32Vaishali Thakkar1-7/+2
This patch introduces the use of function put_unaligned_le32. This is done using Coccinelle and semantic patch used is as follows: @a@ typedef u32, __le32, uint32_t; {u32,__le32,uint32_t} e32; identifier tmp; expression ptr; expression y,e; type T; type T; @@ - tmp = cpu_to_le32(y); <+... when != tmp ( - memcpy(ptr, (T)&tmp, \(4\|sizeof(u32)\|sizeof(__le32)\|sizeof(uint32_t)\|sizeof(e32)\)); + put_unaligned_le32(y,ptr); | - memcpy(ptr, (T)&tmp, ...); + put_unaligned_le32(y,ptr); ) ...+> ? tmp = e @@ type T; identifier a.tmp; @@ - T tmp; ...when != tmp Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23Revert "platform: x86: dell-laptop: Add support for keyboard backlight"Darren Hart1-1049/+6
This reverts commit 02b2aaaa57ab41504e8d03a3b2ceeb9440a2c188. This interface was determined to be flawed and required too invasive a fix for the RC cycle. This will be revisited in 3.20. Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-01-23Revert "Documentation: Add entry for dell-laptop sysfs interface"Darren Hart1-60/+0
This reverts commit 3161293ba6dfceee9c1efe75185677445def05d4. This interface was determined to be flawed and required too invasive a fix for the RC cycle. This will be revisited in 3.20. Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-01-23Bluetooth: Fix nested sleepsPeter Hurley3-15/+11
l2cap/rfcomm/sco_sock_accept() are wait loops which may acquire sleeping locks. Since both wait loops and sleeping locks use task_struct.state to sleep and wake, the nested sleeping locks destroy the wait loop state. Use the newly-minted wait_woken() and DEFINE_WAIT_FUNC() for the wait loop. DEFINE_WAIT_FUNC() allows an alternate wake function to be specified; in this case, the predefined scheduler function, woken_wake_function(). This wait construct ensures wakeups will not be missed without requiring the wait loop to set the task state before condition evaluation. How this works: CPU 0 | CPU 1 | | is <condition> set? | no set <condition> | | wake_up_interruptible | woken_wake_function | set WQ_FLAG_WOKEN | try_to_wake_up | | wait_woken | set TASK_INTERRUPTIBLE | WQ_FLAG_WOKEN? yes | set TASK_RUNNING | | - loop - | | is <condition> set? | yes - exit wait loop Fixes "do not call blocking ops when !TASK_RUNNING" warnings in l2cap_sock_accept(), rfcomm_sock_accept() and sco_sock_accept(). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-01-23Bluetooth: Convert Set SC to use HCI RequestJohan Hedberg3-47/+50
This patch converts the Set Secure Connection HCI handling to use a HCI request instead of using a hard-coded callback in hci_event.c. This e.g. ensures that we don't clear the flags incorrectly if something goes wrong with the power up process (not related to a mgmt Set SC command). The code can also be simplified a bit since only one pending Set SC command is allowed, i.e. mgmt_pending_foreach usage is not needed. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-01-23Bluetooth: Remove incorrect check for BDADDR_BREDR address typeJohan Hedberg1-8/+0
The Add Remote OOB Data mgmt command should allow data to be passed for LE as well. This patch removes a left-over check for BDADDR_BREDR that should not be there anymore. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-01-23Bluetooth: Check for valid bdaddr in add_remote_oob_dataJohan Hedberg1-0/+6
Before doing any other verifications, the add_remote_oob_data function should first check that the given address is valid. This patch adds such a missing check to the beginning of the function. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-01-23bcma: clean bus initialization codeRafał Miłecki3-9/+15
This moves main bus init code to the main.c and renames old function to make its purpose clear. Thanks to this change we'll also be able to separate scanning from registration (and support PCIe Gen 2 devices) in the future. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23b43: stop leds during suspendSabrina Dubroca1-0/+1
Call b43_leds_stop during suspend to avoid this WARN: WARNING: CPU: 1 PID: 0 at net/mac80211/util.c:755 ieee80211_can_queue_work.isra.11+0x35/0x50 [mac80211]() queueing ieee80211 work while going to suspend [...] Call Trace: [<c165fb2a>] dump_stack+0x48/0x69 [<c1052f7b>] warn_slowpath_common+0x8b/0xc0 [<f9c30225>] ? ieee80211_can_queue_work.isra.11+0x35/0x50 [mac80211] [<f9c30225>] ? ieee80211_can_queue_work.isra.11+0x35/0x50 [mac80211] [<c1052fe3>] warn_slowpath_fmt+0x33/0x40 [<f9c30225>] ieee80211_can_queue_work.isra.11+0x35/0x50 [mac80211] [<f9c30260>] ieee80211_queue_work+0x20/0x40 [mac80211] [<f9f25d78>] b43_led_brightness_set+0x28/0x30 [b43] [<c14f3835>] led_timer_function+0xd5/0xe0 [<c10cb534>] call_timer_fn+0xa4/0x4a0 Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wlcore: unlock on error in wl1271_op_suspend()Dan Carpenter1-1/+3
We recently introduced a new error path which needs an unlock. Fixes: 6d5a748d4836 ('wlcore: add ability to reduce FW interrupts during suspend') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23rtlwifi/rtl8192de: remove redundant else if checkColin Ian King1-1/+1
The else if check condition checks for the opposite of the if check, hence the else if check is redundant and can be replaced with a simple else: if (rtlpriv->rtlhal.macphymode == SINGLEMAC_SINGLEPHY) { .. } else if (rtlpriv->rtlhal.macphymode != SINGLEMAC_SINGLEPHY) { .. } replaced with: if (rtlpriv->rtlhal.macphymode == SINGLEMAC_SINGLEPHY) { .. } else { .. } Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23ath9k_htc: Add a module parameter to disable blinkHong Xu3-0/+11
Add an option "blink" to enable or disable the LED blink. The default value is set to 1 so that existing users would not experience any unexpected changes. Signed-off-by: Hong Xu <hong@topbug.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: initiate TX BA sessionsBob Copeland3-2/+77
Currently, wcn36xx only asks for a TX BA session if it has already established one for RX. Thus, two wcn36xx devices cannot do a-mpdu between themselves since they both wait for the other to go first. Fix this by starting a BA session after a few QoS data frames have been sent to a STA. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: move set_tx_pdu inside set_tx_data/mgmtBob Copeland1-17/+20
The pdu is part of the buffer descriptor, so it makes sense that one function would fill both. Also, passing the whole skb instead of just the header pointer to the set_tx_data function paves the way for using its fields for ampdu setup inside set_tx_data(). Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: initialize dxe lockBob Copeland1-0/+2
The dxe lock is missing its initialization, so add it. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: initialize skb_lockBob Copeland1-0/+1
ctl->skb_lock is never initialized, a fact caught by lockdep. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: don't process 'valid' descriptorsBob Copeland1-0/+2
The DMA engine will reset the valid bit after a descriptor is complete; any with the valid bit still set may still be in use by the hardware, so check that before freeing the descriptor. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: let device generate qos seq numbersBob Copeland2-1/+9
wcn36xx currently sends an incorrect sequence number into the BA session setup firmware command: it should be saving or updating the ssn in the TX_START ampdu_action callback instead of waiting until TX_OPERATIONAL. However, we can sidestep the issue by letting the hardware generate the sequence numbers for QoS frames, as is done in prima, so do that. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: use !! when assigning int as a booleanBob Copeland1-1/+1
bd->tx_comp is a single bit in a bitfield, so assigning "info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS" only happens to work because TX_STATUS is defined to BIT(0); if it were any other bit this assignment would fail. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23wcn36xx: initialize device defaults on startBob Copeland1-2/+71
Set up default configuration for the device when we call start. The defaults come from dumps from the prima driver for the same hardware. This fixes transmit A-MPDU; previously only one MPDU would be sent per A-MPDU due to missing MAX_MPDUS_IN_AMPDU setting. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 20:50:49 +0300