summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-01-30arm/arm64: KVM: Use set/way op trapping to track the state of the cachesMarc Zyngier14-145/+161
Trying to emulate the behaviour of set/way cache ops is fairly pointless, as there are too many ways we can end-up missing stuff. Also, there is some system caches out there that simply ignore set/way operations. So instead of trying to implement them, let's convert it to VA ops, and use them as a way to re-enable the trapping of VM ops. That way, we can detect the point when the MMU/caches are turned off, and do a full VM flush (which is what the guest was trying to do anyway). This allows a 32bit zImage to boot on the APM thingy, and will probably help bootloaders in general. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-01-30rtnetlink: pass link_net to the newlink handlerNicolas Dichtel1-1/+1
When IFLA_LINK_NETNSID is used, the netdevice should be built in this link netns and moved at the end to another netns (pointed by the socket netns or IFLA_NET_NS_[PID|FD]). Existing user of the newlink handler will use the netns argument (src_net) to find a link netdevice or to check some other information into the link netns. For example, to find a netdevice, two information are required: an ifindex (usually from IFLA_LINK) and a netns (this link netns). Note: when using IFLA_LINK_NETNSID and IFLA_NET_NS_[PID|FD], a user may create a netdevice that stands in netnsX and with its link part in netnsY, by sending a rtnl message from netnsZ. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30Merge branch 'netns'David S. Miller3-7/+5
Nicolas Dichtel says: ==================== netns: audit netdevice creation with IFLA_NET_NS_[PID|FD] When one of these attributes is set, the netdevice is created into the netns pointed by IFLA_NET_NS_[PID|FD] (see the call to rtnl_create_link() in rtnl_newlink()). Let's call this netns the dest_net. After this creation, if the newlink handler exists, it is called with a netns argument that points to the netns where the netlink message has been received (called src_net in the code) which is the link netns. Hence, with one of these attributes, it's possible to create a x-netns netdevice. Here is the result of my code review: - all ip tunnels (sit, ipip, ip6_tunnels, gre[tap][v6], ip_vti[6]) does not really allows to use this feature: the netdevice is created in the dest_net and the src_net is completely ignored in the newlink handler. - VLAN properly handles this x-netns creation. - bridge ignores src_net, which seems fine (NETIF_F_NETNS_LOCAL is set). - CAIF subsystem is not clear for me (I don't know how it works), but it seems to wrongly use src_net. Patch #1 tries to fix this, but it was done only by code review (and only compile-tested), so please carefully review it. I may miss something. - HSR subsystem uses src_net to parse IFLA_HSR_SLAVE[1|2], but the netdevice has the flag NETIF_F_NETNS_LOCAL, so the question is: does this netdevice really supports x-netns? If not, the newlink handler should use the dest_net instead of src_net, I can provide the patch. - ieee802154 uses also src_net and does not have NETIF_F_NETNS_LOCAL. Same question: does this netdevice really supports x-netns? - bonding ignores src_net and flag NETIF_F_NETNS_LOCAL is set, ie x-netns is not supported. Fine. - CAN does not support rtnl/newlink, ok. - ipvlan uses src_net and does not have NETIF_F_NETNS_LOCAL. After looking at the code, it seems that this drivers support x-netns. Am I right? - macvlan/macvtap uses src_net and seems to have x-netns support. - team ignores src_net and has the flag NETIF_F_NETNS_LOCAL, ie x-netns is not supported. Ok. - veth uses src_net and have x-netns support ;-) Ok. - VXLAN didn't properly handle this. The link netns (vxlan->net) is the src_net and not dest_net (see patch #2). Note that it was already possible to create a x-netns vxlan before the commit f01ec1c017de ("vxlan: add x-netns support") but the nedevice remains broken. To summarize: - CAIF patch must be carefully reviewed - for HSR, ieee802154, ipvlan: is x-netns supported? ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30vxlan: setup the right link netns in newlink hdlrNicolas Dichtel1-5/+5
Rename the netns to src_net to avoid confusion with the netns where the interface stands. The user may specify IFLA_NET_NS_[PID|FD] to create a x-netns netndevice: IFLA_NET_NS_[PID|FD] points to the netns where the netdevice stands and src_net to the link netns. Note that before commit f01ec1c017de ("vxlan: add x-netns support"), it was possible to create a x-netns vxlan netdevice, but the netdevice was not operational. Fixes: f01ec1c017de ("vxlan: add x-netns support") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30caif: remove wrong dev_net_set() callNicolas Dichtel2-2/+0
src_net points to the netns where the netlink message has been received. This netns may be different from the netns where the interface is created (because the user may add IFLA_NET_NS_[PID|FD]). In this case, src_net is the link netns. It seems wrong to override the netns in the newlink() handler because if it was not already src_net, it means that the user explicitly asks to create the netdevice in another netns. CC: Sjur Brændeland <sjur.brandeland@stericsson.com> CC: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no> Fixes: 8391c4aab1aa ("caif: Bugfixes in CAIF netdevice for close and flow control") Fixes: c41254006377 ("caif-hsi: Add rtnl support") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29lib/checksum.c: fix build for generic csum_tcpudp_nofoldkarl beldan1-9/+9
Fixed commit added from64to32 under _#ifndef do_csum_ but used it under _#ifndef csum_tcpudp_nofold_, breaking some builds (Fengguang's robot reported TILEGX's). Move from64to32 under the latter. Fixes: 150ae0e94634 ("lib/checksum.c: fix carry in csum_tcpudp_nofold") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Cc: Eric Dumazet <edumazet@google.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29Merge tag 'sound-3.19-rc7' of ↵Linus Torvalds17-66/+93
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This batch ended up being larger than wished, but there is nothing to worry too much there. Most of commits are for ASoC, a compress NULL dereference fix, a fix for probe error handling, and the rest are device-specific fixes. In addition, we have a fix for a long-standing but of seq-dummy driver, which just cuts off the buggy part in the end" * tag 'sound-3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: seq-dummy: remove deadlock-causing events on close ASoC: omap-mcbsp: Correct CBM_CFS dai format configuration ASoC: soc-compress.c: fix NULL dereference ASoC: rt286: set the same format for dac and adc ASoC: wm8904: fix runtime warning ASoC: simple-card: Fix crash in asoc_simple_card_unref() ASoC: fsl: imx-wm8962: Set the card owner field ASoC: pcm512x: Fix DSP program selection ASoC: rt5677: Modify the behavior that updates the PLL parameter. ASoC: fsl_ssi: Fix irq error check ASoC: rockchip: i2s: applys rate symmetry for CPU DAI ASoC: Intel: Add NULL checks for the stream pointer ASoC: wm8960: Fix capture sample rate from 11250 to 11025 ASoC: adi: Add missing return statement. ASoC: Intel: Don't change offset of block allocator during fixed allocate ASoC: ts3a227e: Check and report jack status at probe ASoC: fsl_esai: Fix incorrect xDC field width of xCCR registers
2015-01-29Merge tag 'pinctrl-v3.19-4' of ↵Linus Torvalds1-53/+55
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull final pin control fix from Linus Walleij: "A late pin control fix for the v3.19 series: The AT91 gpio controller would miss wakeup events, this single fix make it work properly" [ "Final"? Yeah, I'll believe that once I've actually released 3.19 ;) - Linus ] * tag 'pinctrl-v3.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: at91: allow to have disabled gpio bank
2015-01-29vm: make stack guard page errors return VM_FAULT_SIGSEGV rather than SIGBUSLinus Torvalds1-1/+1
The stack guard page error case has long incorrectly caused a SIGBUS rather than a SIGSEGV, but nobody actually noticed until commit fee7e49d4514 ("mm: propagate error from stack expansion even for guard page") because that error case was never actually triggered in any normal situations. Now that we actually report the error, people noticed the wrong signal that resulted. So far, only the test suite of libsigsegv seems to have actually cared, but there are real applications that use libsigsegv, so let's not wait for any of those to break. Reported-and-tested-by: Takashi Iwai <tiwai@suse.de> Tested-by: Jan Engelhardt <jengelh@inai.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # "s390 still compiles and boots" Cc: linux-arch@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-29Bluetooth: Set HCI_QUIRK_STRICT_DUPLICATE_FILTER for BTUSB_ATH3012Jakub Pawlowski1-1/+3
The Bluetooth controllers from Atheros use a strict scanning filter policy that filters based on Bluetooth device addresses and not on RSSI. So tell the core about this. Signed-off-by: Jakub Pawlowski <jpawlowski@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-01-29arm: dma-mapping: Set DMA IOMMU ops in arm_iommu_attach_device()Laurent Pinchart1-15/+38
Commit 4bb25789ed28228a ("arm: dma-mapping: plumb our iommu mapping ops into arch_setup_dma_ops") moved the setting of the DMA operations from arm_iommu_attach_device() to arch_setup_dma_ops() where the DMA operations to be used are selected based on whether the device is connected to an IOMMU. However, the IOMMU detection scheme requires the IOMMU driver to be ported to the new IOMMU of_xlate API. As no driver has been ported yet, this effectively breaks all IOMMU ARM users that depend on the IOMMU being handled transparently by the DMA mapping API. Fix this by restoring the setting of DMA IOMMU ops in arm_iommu_attach_device() and splitting the rest of the function into a new internal __arm_iommu_attach_device() function, called by arch_setup_dma_ops(). Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-29vm: add VM_FAULT_SIGSEGV handling supportLinus Torvalds30-7/+63
The core VM already knows about VM_FAULT_SIGBUS, but cannot return a "you should SIGSEGV" error, because the SIGSEGV case was generally handled by the caller - usually the architecture fault handler. That results in lots of duplication - all the architecture fault handlers end up doing very similar "look up vma, check permissions, do retries etc" - but it generally works. However, there are cases where the VM actually wants to SIGSEGV, and applications _expect_ SIGSEGV. In particular, when accessing the stack guard page, libsigsegv expects a SIGSEGV. And it usually got one, because the stack growth is handled by that duplicated architecture fault handler. However, when the generic VM layer started propagating the error return from the stack expansion in commit fee7e49d4514 ("mm: propagate error from stack expansion even for guard page"), that now exposed the existing VM_FAULT_SIGBUS result to user space. And user space really expected SIGSEGV, not SIGBUS. To fix that case, we need to add a VM_FAULT_SIGSEGV, and teach all those duplicate architecture fault handlers about it. They all already have the code to handle SIGSEGV, so it's about just tying that new return value to the existing code, but it's all a bit annoying. This is the mindless minimal patch to do this. A more extensive patch would be to try to gather up the mostly shared fault handling logic into one generic helper routine, and long-term we really should do that cleanup. Just from this patch, you can generally see that most architectures just copied (directly or indirectly) the old x86 way of doing things, but in the meantime that original x86 model has been improved to hold the VM semaphore for shorter times etc and to handle VM_FAULT_RETRY and other "newer" things, so it would be a good idea to bring all those improvements to the generic case and teach other architectures about them too. Reported-and-tested-by: Takashi Iwai <tiwai@suse.de> Tested-by: Jan Engelhardt <jengelh@inai.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # "s390 still compiles and boots" Cc: linux-arch@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-29Bluetooth: ath3k: workaround the compatibility issue with xHCI controllerAdam Lee1-0/+8
BugLink: https://bugs.launchpad.net/bugs/1400215 ath3k devices fail to load firmwares on xHCI buses, but work well on EHCI, this might be a compatibility issue between xHCI and ath3k chips. As my testing result, those chips will work on xHCI buses again with this patch. This workaround is from Qualcomm, they also did some workarounds in Windows driver. Signed-off-by: Adam Lee <adam.lee@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-01-29blk-mq: release mq's kobjects in blk_release_queue()Ming Lei3-7/+26
The kobject memory inside blk-mq hctx/ctx shouldn't have been freed before the kobject is released because driver core can access it freely before its release. We can't do that in all ctx/hctx/mq_kobj's release handler because it can be run before blk_cleanup_queue(). Given mq_kobj shouldn't have been introduced, this patch simply moves mq's release into blk_release_queue(). Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-29Revert "blk-mq: fix hctx/ctx kobject use-after-free"Ming Lei2-24/+7
This reverts commit 76d697d10769048e5721510100bf3a9413a56385. The commit 76d697d10769048 causes general protection fault reported from Bart Van Assche: https://lkml.org/lkml/2015/1/28/334 Reported-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-29Bluetooth: Fix sending Read Remote Extended Features commandSzymon Janc1-1/+2
This command should only be used if remote device reports that it supports extended features. Otherwise command will fail and connection will be dropped. Some devices support SSP but don't support extended features so current check for SSP support is not enought. Instead of checking for SSP support just check if both ends support Extended Feature. < HCI Command: Create Connection (0x01|0x0005) plen 13 Address: D0:9C:30:00:19:6F (Foster Electric Company, Limited) Packet type: 0xcc18 DM1 may be used DH1 may be used DM3 may be used DH3 may be used DM5 may be used DH5 may be used Page scan repetition mode: R1 (0x01) Page scan mode: Mandatory (0x00) Clock offset: 0x94c8 Role switch: Allow slave (0x01) > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) ncmd 1 Status: Success (0x00) > HCI Event: Connect Complete (0x03) plen 11 Status: Success (0x00) Handle: 5 Address: D0:9C:30:00:19:6F (Foster Electric Company, Limited) Link type: ACL (0x01) Encryption: Disabled (0x00) < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 Handle: 5 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) ncmd 1 Status: Success (0x00) > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 Address: D0:9C:30:00:19:6F (Foster Electric Company, Limited) Page scan repetition mode: R1 (0x01) > HCI Event: Read Remote Supported Features (0x0b) plen 11 Status: Success (0x00) Handle: 5 Features: 0xff 0xff 0x8f 0xfe 0xdb 0xff 0x5b 0x07 3 slot packets 5 slot packets Encryption Slot offset Timing accuracy Role switch Hold mode Sniff mode Park state Power control requests Channel quality driven data rate (CQDDR) SCO link HV2 packets HV3 packets u-law log synchronous data A-law log synchronous data CVSD synchronous data Paging parameter negotiation Power control Transparent synchronous data Broadcast Encryption Enhanced Data Rate ACL 2 Mbps mode Enhanced Data Rate ACL 3 Mbps mode Enhanced inquiry scan Interlaced inquiry scan Interlaced page scan RSSI with inquiry results Extended SCO link (EV3 packets) EV4 packets EV5 packets AFH capable slave AFH classification slave LE Supported (Controller) 3-slot Enhanced Data Rate ACL packets 5-slot Enhanced Data Rate ACL packets Sniff subrating Pause encryption AFH capable master AFH classification master Enhanced Data Rate eSCO 2 Mbps mode Enhanced Data Rate eSCO 3 Mbps mode 3-slot Enhanced Data Rate eSCO packets Extended Inquiry Response Simultaneous LE and BR/EDR (Controller) Secure Simple Pairing Encapsulated PDU Non-flushable Packet Boundary Flag Link Supervision Timeout Changed Event Inquiry TX Power Level Enhanced Power Control < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 Handle: 5 Page: 1 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) ncmd 1 Status: Command Disallowed (0x0c) < HCI Command: Read Clock Offset (0x01|0x001f) plen 2 Handle: 5 > HCI Event: Command Status (0x0f) plen 4 Read Clock Offset (0x01|0x001f) ncmd 1 Status: Success (0x00) < HCI Command: Disconnect (0x01|0x0006) plen 3 Handle: 5 Reason: Remote User Terminated Connection (0x13) Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-01-29nl80211: don't document per-wiphy interface dumpJohannes Berg1-2/+2
Such a feature doesn't exist and isn't really needed since you probably won't have enough interfaces to make it worthwhile, so just remove that from the documentation. Reported-by: booto [on IRC] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-29ARM: 8298/1: ARM_KERNMEM_PERMS only works with MMU enabledArnd Bergmann1-0/+1
The recently added ARM_KERNMEM_PERMS feature works by manipulating the kernel page tables, which obviously requires an MMU. Trying to enable this feature when the MMU is disabled results in a lot of compile errors in mm/init.c, so let's add a Kconfig dependency to avoid that case. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-29ARM: 8295/1: fix v7M build for !CONFIG_PRINTKRob Herring1-0/+2
Minimal builds for v7M are broken when printk is disabled. The caller is assembly so add the necessary ifdef around the call. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-29ARM: 8294/1: ATAG_DTB_COMPAT: remove the DT workspace's hardcoded 64KB sizeNicolas Pitre1-9/+30
There is currently a hardcoded limit of 64KB for the DTB to live in and be extended with ATAG info. Some DTBs have outgrown that limit: $ du -b arch/arm/boot/dts/omap3-n900.dtb 70212 arch/arm/boot/dts/omap3-n900.dtb Furthermore, the actual size passed to atags_to_fdt() included the stack size which is obviously wrong. The initial DTB size is known, so use it to size the allocated workspace with a 50% growth assumption and relocate the temporary stack above that. This is also clamped to 32KB min / 1MB max for robustness against bad DTB data. Reported-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-29ARM: 8288/1: dma-mapping: don't detach devices without an IOMMU during teardownWill Deacon1-0/+3
When tearing down the DMA ops for a device via of_dma_deconfigure, we unconditionally detach the device from its IOMMU domain. For devices that aren't actually behind an IOMMU, this produces a "Not attached" warning message on the console. This patch changes the teardown code so that we don't detach from the IOMMU domain when there isn't an IOMMU dma mapping to start with. Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-29ARM: shmobile: r8a7790: Instantiate GIC from C board code in legacy buildsMagnus Damm3-0/+20
As of commit 9a1091ef0017c40a ("irqchip: gic: Support hierarchy irq domain."), the Lager legacy board support is known to be broken. The IRQ numbers of the GIC are now virtual, and no longer match the hardcoded hardware IRQ numbers in the legacy platform board code. To fix this issue specific to non-multiplatform r8a7790 and Lager: 1) Instantiate the GIC from platform board code and also 2) Skip over the DT arch timer as well as 3) Force delay setup based on DT CPU frequency With these 3 fixes in place interrupts on Lager are now unbroken. Partially based on legacy GIC fix by Geert Uytterhoeven, thanks to him for the initial work. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-01-29Bluetooth: btusb: Add support for USB based AMP controllersMarcel Holtmann1-4/+25
The Bluetooth HCI transport specification for USB device defines on how a standard AMP controller is identified and operated. This patch adds the needed handling to hook it up to the Bluetooth stack. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-01-29tcp: ipv4: initialize unicast_sock sk_pacing_rateEric Dumazet1-0/+1
When I added sk_pacing_rate field, I forgot to initialize its value in the per cpu unicast_sock used in ip_send_unicast_reply() This means that for sch_fq users, RST packets, or ACK packets sent on behalf of TIME_WAIT sockets might be sent to slowly or even dropped once we reach the per flow limit. Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 95bd09eb2750 ("tcp: TSO packets automatic sizing") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29pkt_sched: fq: remove useless TIME_WAIT checkEric Dumazet1-2/+2
TIME_WAIT sockets are not owning any skb. ip_send_unicast_reply() and tcp_v6_send_response() both use regular sockets. We can safely remove a test in sch_fq and save one cache line miss, as sk_state is far away from sk_pacing_rate. Tested at Google for about one year. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29act_connmark: fix dependencies betterArnd Bergmann1-1/+1
NET_ACT_CONNMARK fails to build if NF_CONNTRACK_MARK is disabled, and d7924450e14ea4 ("act_connmark: Add missing dependency on NF_CONNTRACK_MARK") fixed that case, but missed the cased where NF_CONNTRACK is a loadable module. This adds the second dependency to ensure that NET_ACT_CONNMARK can only be built-in if NF_CONNTRACK is also part of the kernel rather than a loadable module. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29net: remove sock_iocbChristoph Hellwig4-126/+43
The sock_iocb structure is allocate on stack for each read/write-like operation on sockets, and contains various fields of which only the embedded msghdr and sometimes a pointer to the scm_cookie is ever used. Get rid of the sock_iocb and put a msghdr directly on the stack and pass the scm_cookie explicitly to netlink_mmap_sendmsg. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29hisilicon: add some missing curly bracesDan Carpenter1-1/+2
The if block was supposed to have curly braces. In the current code we complain about dropped rx packets when we shouldn't. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29openvswitch: Add support for checksums on UDP tunnels.Jesse Gross4-7/+10
Currently, it isn't possible to request checksums on the outer UDP header of tunnels - the TUNNEL_CSUM flag is ignored. This adds support for requesting that UDP checksums be computed on transmit and properly reported if they are present on receive. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29Merge tag 'nfc-next-3.20-1' of ↵David S. Miller21-149/+886
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next NFC: 3.20 first pull request This is the first NFC pull request for 3.20. With this one we have: - Secure element support for the ST Micro st21nfca driver. This depends on a few HCI internal changes in order for example to support more than one secure element per controller. - ACPI support for NXP's pn544 HCI driver. This controller is found on many x86 SoCs and is typically enumerated on the ACPI bus there. - A few st21nfca and st21nfcb fixes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29lib/checksum.c: fix carry in csum_tcpudp_nofoldkarl beldan1-2/+10
The carry from the 64->32bits folding was dropped, e.g with: saddr=0xFFFFFFFF daddr=0xFF0000FF len=0xFFFF proto=0 sum=1, csum_tcpudp_nofold returned 0 instead of 1. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mike Frysinger <vapier@gentoo.org> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29Bluetooth: btusb: Ignore unknown Intel devices with generic descriptorMarcel Holtmann1-1/+4
The Intel Bluetooth devices use the generic USB device/interface class descriptors that are assigned to Bluetooth H:2 conforming transports. T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 However newer chips have a bootloader stage and require firmware to be loaded before they are functional. To avoid any confusion for the users, just ignore unknown Intel Bluetooth devices. All the released Intel Bluetooth devices have an entry in the device table identifying their setup and support requirements. The advantage here is that older kernel can be booted with newer devices without causing any disturbance. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-01-29Bluetooth: btusb: Sort USB_DEVICE entries for Marvell by vendor idMarcel Holtmann1-3/+4
New entries to the USB blacklist/quirk device table should be sorted by USB vendor id. Fix the recent entry fro Marvell devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-01-29bridge: dont send notification when skb->len == 0 in rtnl_bridge_notifyRoopa Prabhu1-1/+5
Reported in: https://bugzilla.kernel.org/show_bug.cgi?id=92081 This patch avoids calling rtnl_notify if the device ndo_bridge_getlink handler does not return any bytes in the skb. Alternately, the skb->len check can be moved inside rtnl_notify. For the bridge vlan case described in 92081, there is also a fix needed in bridge driver to generate a proper notification. Will fix that in subsequent patch. v2: rebase patch on net tree Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29Merge branch 'tcp_stretch_acks'David S. Miller7-40/+44
Neal Cardwell says: ==================== fix stretch ACK bugs in TCP CUBIC and Reno This patch series fixes the TCP CUBIC and Reno congestion control modules to properly handle stretch ACKs in their respective additive increase modes, and in the transitions from slow start to additive increase. This finishes the project started by commit 9f9843a751d0a2057 ("tcp: properly handle stretch acks in slow start"), which fixed behavior for TCP congestion control when handling stretch ACKs in slow start mode. Motivation: In the Jan 2015 netdev thread 'BW regression after "tcp: refine TSO autosizing"', Eyal Perry documented a regression that Eric Dumazet determined was caused by improper handling of TCP stretch ACKs. Background: LRO, GRO, delayed ACKs, and middleboxes can cause "stretch ACKs" that cover more than the RFC-specified maximum of 2 packets. These stretch ACKs can cause serious performance shortfalls in common congestion control algorithms, like Reno and CUBIC, which were designed and tuned years ago with receiver hosts that were not using LRO or GRO, and were instead ACKing every other packet. Testing: at Google we have been using this approach for handling stretch ACKs for CUBIC datacenter and Internet traffic for several years, with good results. v2: * fixed return type of tcp_slow_start() to be u32 instead of int ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29tcp: fix timing issue in CUBIC slope calculationNeal Cardwell1-0/+8
This patch fixes a bug in CUBIC that causes cwnd to increase slightly too slowly when multiple ACKs arrive in the same jiffy. If cwnd is supposed to increase at a rate of more than once per jiffy, then CUBIC was sometimes too slow. Because the bic_target is calculated for a future point in time, calculated with time in jiffies, the cwnd can increase over the course of the jiffy while the bic_target calculated as the proper CUBIC cwnd at time t=tcp_time_stamp+rtt does not increase, because tcp_time_stamp only increases on jiffy tick boundaries. So since the cnt is set to: ca->cnt = cwnd / (bic_target - cwnd); as cwnd increases but bic_target does not increase due to jiffy granularity, the cnt becomes too large, causing cwnd to increase too slowly. For example: - suppose at the beginning of a jiffy, cwnd=40, bic_target=44 - so CUBIC sets: ca->cnt = cwnd / (bic_target - cwnd) = 40 / (44 - 40) = 40/4 = 10 - suppose we get 10 acks, each for 1 segment, so tcp_cong_avoid_ai() increases cwnd to 41 - so CUBIC sets: ca->cnt = cwnd / (bic_target - cwnd) = 41 / (44 - 41) = 41 / 3 = 13 So now CUBIC will wait for 13 packets to be ACKed before increasing cwnd to 42, insted of 10 as it should. The fix is to avoid adjusting the slope (determined by ca->cnt) multiple times within a jiffy, and instead skip to compute the Reno cwnd, the "TCP friendliness" code path. Reported-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29tcp: fix stretch ACK bugs in CUBICNeal Cardwell1-22/+9
Change CUBIC to properly handle stretch ACKs in additive increase mode by passing in the count of ACKed packets to tcp_cong_avoid_ai(). In addition, because we are now precisely accounting for stretch ACKs, including delayed ACKs, we can now remove the delayed ACK tracking and estimation code that tracked recent delayed ACK behavior in ca->delayed_ack. Reported-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29tcp: fix stretch ACK bugs in RenoNeal Cardwell1-4/+6
Change Reno to properly handle stretch ACKs in additive increase mode by passing in the count of ACKed packets to tcp_cong_avoid_ai(). In addition, if snd_cwnd crosses snd_ssthresh during slow start processing, and we then exit slow start mode, we need to carry over any remaining "credit" for packets ACKed and apply that to additive increase by passing this remaining "acked" count to tcp_cong_avoid_ai(). Reported-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29tcp: fix the timid additive increase on stretch ACKsNeal Cardwell1-6/+9
tcp_cong_avoid_ai() was too timid (snd_cwnd increased too slowly) on "stretch ACKs" -- cases where the receiver ACKed more than 1 packet in a single ACK. For example, suppose w is 10 and we get a stretch ACK for 20 packets, so acked is 20. We ought to increase snd_cwnd by 2 (since acked/w = 20/10 = 2), but instead we were only increasing cwnd by 1. This patch fixes that behavior. Reported-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29tcp: stretch ACK fixes prepNeal Cardwell7-11/+15
LRO, GRO, delayed ACKs, and middleboxes can cause "stretch ACKs" that cover more than the RFC-specified maximum of 2 packets. These stretch ACKs can cause serious performance shortfalls in common congestion control algorithms that were designed and tuned years ago with receiver hosts that were not using LRO or GRO, and were instead politely ACKing every other packet. This patch series fixes Reno and CUBIC to handle stretch ACKs. This patch prepares for the upcoming stretch ACK bug fix patches. It adds an "acked" parameter to tcp_cong_avoid_ai() to allow for future fixes to tcp_cong_avoid_ai() to correctly handle stretch ACKs, and changes all congestion control algorithms to pass in 1 for the ACKed count. It also changes tcp_slow_start() to return the number of packet ACK "credits" that were not processed in slow start mode, and can be processed by the congestion control module in additive increase mode. In future patches we will fix tcp_cong_avoid_ai() to handle stretch ACKs, and fix Reno and CUBIC handling of stretch ACKs in slow start and additive increase mode. Reported-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29Bluetooth: Move smp_unregister() into hci_dev_do_close() functionMarcel Holtmann1-6/+2
The smp_unregister() function needs to be called every time the controller is powered down. There are multiple entry points when this can happen. One is "hciconfig hci0 reset" which will throw a WARN_ON when LE support has been enabled. [ 78.564620] WARNING: CPU: 0 PID: 148 at net/bluetooth/smp.c:3075 smp_register+0xf1/0x170() [ 78.564622] Modules linked in: [ 78.564628] CPU: 0 PID: 148 Comm: kworker/u3:1 Not tainted 3.19.0-rc4-devel+ #404 [ 78.564629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS [ 78.564635] Workqueue: hci0 hci_rx_work [ 78.564638] ffffffff81b4a7a2 ffff88001cb2fb38 ffffffff8161d881 0000000080000000 [ 78.564642] 0000000000000000 ffff88001cb2fb78 ffffffff8103b870 696e55206e6f6f6d [ 78.564645] ffff88001d965000 0000000000000000 0000000000000000 ffff88001d965000 [ 78.564648] Call Trace: [ 78.564655] [<ffffffff8161d881>] dump_stack+0x4f/0x7b [ 78.564662] [<ffffffff8103b870>] warn_slowpath_common+0x80/0xc0 [ 78.564667] [<ffffffff81544b00>] ? add_uuid+0x1f0/0x1f0 [ 78.564671] [<ffffffff8103b955>] warn_slowpath_null+0x15/0x20 [ 78.564674] [<ffffffff81562d81>] smp_register+0xf1/0x170 [ 78.564680] [<ffffffff81081236>] ? lock_timer_base.isra.30+0x26/0x50 [ 78.564683] [<ffffffff81544bf0>] powered_complete+0xf0/0x120 [ 78.564688] [<ffffffff8152e622>] hci_req_cmd_complete+0x82/0x260 [ 78.564692] [<ffffffff8153554f>] hci_cmd_complete_evt+0x6cf/0x2e20 [ 78.564697] [<ffffffff81623e43>] ? _raw_spin_unlock_irqrestore+0x13/0x30 [ 78.564701] [<ffffffff8106b0af>] ? __wake_up_sync_key+0x4f/0x60 [ 78.564705] [<ffffffff8153a2ab>] hci_event_packet+0xbcb/0x2e70 [ 78.564709] [<ffffffff814094d3>] ? skb_release_all+0x23/0x30 [ 78.564711] [<ffffffff81409529>] ? kfree_skb+0x29/0x40 [ 78.564715] [<ffffffff815296c8>] hci_rx_work+0x1c8/0x3f0 [ 78.564719] [<ffffffff8105bd91>] ? get_parent_ip+0x11/0x50 [ 78.564722] [<ffffffff8105be25>] ? preempt_count_add+0x55/0xb0 [ 78.564727] [<ffffffff8104f65f>] process_one_work+0x12f/0x360 [ 78.564731] [<ffffffff8104ff9b>] worker_thread+0x6b/0x4b0 [ 78.564735] [<ffffffff8104ff30>] ? cancel_delayed_work_sync+0x10/0x10 [ 78.564738] [<ffffffff810542fa>] kthread+0xea/0x100 [ 78.564742] [<ffffffff81620000>] ? __schedule+0x3e0/0x980 [ 78.564745] [<ffffffff81054210>] ? kthread_create_on_node+0x180/0x180 [ 78.564749] [<ffffffff816246ec>] ret_from_fork+0x7c/0xb0 [ 78.564752] [<ffffffff81054210>] ? kthread_create_on_node+0x180/0x180 [ 78.564755] ---[ end trace 8b0d943af76d3736 ]--- This warning is not critical and has only been placed in the code to actually catch this exact situation. To avoid triggering it move the smp_unregister() into hci_dev_do_close() which will now also take care of remove the SMP channel. It is safe to call this function since it only remove the channel if it has been previously registered. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-01-29ARM: shmobile: r8a73a4: Instantiate GIC from C board code in legacy buildsMagnus Damm2-0/+27
As of commit 9a1091ef0017c40a ("irqchip: gic: Support hierarchy irq domain."), the APE6EVM legacy board support is known to be broken. The IRQ numbers of the GIC are now virtual, and no longer match the hardcoded hardware IRQ numbers in the legacy platform board code. To fix this issue specific to non-muliplatform r8a73a4 and APE6EVM: 1) Instantiate the GIC from platform board code and also 2) Skip over the DT arch timer as well as 3) Force delay setup based on DT CPU frequency With these 3 fixes in place interrupts on APE6EVM are now unbroken. Partially based on legacy GIC fix by Geert Uytterhoeven, thanks to him for the initial work. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-01-29Merge tag 'mvebu-fixes-3.19-6' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson1-0/+7
Merge "mvebu-fixes-6" from Andrew Lunn: The previous fix for Armada XP, disabling I/O coherency, broke Armada 375/38x. Only switch the PL310 to I/O coherent mode if I/O coherency is enabled. * tag 'mvebu-fixes-3.19-6' of git://git.infradead.org/linux-mvebu: ARM: mvebu: don't set the PL310 in I/O coherency mode when I/O coherency is disabled Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-28Bluetooth: btusb: Provide hardware error handler for Intel devicesMarcel Holtmann1-0/+42
The Intel Bluetooth controllers can provide an additional exception info string when a hardware error event occurs. The core will now call hdev->hw_error to let the driver read out this information. This change will cause a reset of the hardware to bring it back into functional state and then read the Intel exception info string and print it along with the error information. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-01-28Bluetooth: Perform a power cycle when receiving hardware error eventMarcel Holtmann3-1/+27
When receiving a HCI Hardware Error event, the controller should be assumed to be non-functional until issuing a HCI Reset command. The Bluetooth hardware errors are vendor specific and so add a new hdev->hw_error callback that drivers can provide to run extra code to handle the hardware error. After completing the vendor specific error handling perform a full reset of the Bluetooth stack by closing and re-opening the transport. Based-on-patch-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-01-28Bluetooth: Introduce hci_dev_do_reset helper functionMarcel Holtmann1-23/+34
Split the hci_dev_reset ioctl handling into using hci_dev_do_reset helper function. Similar to what has been done with hci_dev_do_open and hci_dev_do_close. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-01-28Bluetooth: Fix notifying discovery state when powering offJohan Hedberg1-0/+2
The discovery state should be set to stopped when the HCI device is powered off. This patch adds the appropriate call to the hci_discovery_set_state() function from hci_dev_do_close() which is responsible for the power-off procedure. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-01-28Bluetooth: Fix notifying discovery state upon resetJohan Hedberg1-1/+2
When HCI_Reset is issued the discovery state is assumed to be stopped. The hci_cc_reset() handler was trying to set the state but it was doing it without using the hci_discovery_set_state() function. Because of this e.g. the mgmt Discovering event could go without being sent. This patch fixes the code to use the hci_discovery_set_state() function instead of just blindly setting the state value. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-01-28Bluetooth: Fix check for SSP when enabling SCJohan Hedberg1-0/+1
There's a check in set_secure_conn() that's supposed to ensure that SSP is enabled before we try to request the controller to enable SC (since SSP is a pre-requisite for it). However, this check only makes sense for controllers actually supporting BR/EDR SC. If we have a 4.0 controller we're only interested in the LE part of SC and should therefore not be requiring SSP to be enabled. This patch adds an additional condition to check for lmp_sc_capable(hdev) before requiring SSP to be enabled. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-01-28Bluetooth: btusb: Remove redundant call to btusb_free_frags()Johan Hedberg1-1/+0
The btusb_disconnect() callback calls hci_unregister_dev() which in turn calls btusb_close() if the HCI device is powered. The btusb_close() function in turn will call btusb_free_frags(). It's therefore unnecessary to have another call to btusb_free_frags() in the btusb_disconnect() function. Besides the redundancy the second call seems to also cause some strange stability issues which this patch then also fixes. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 00:38:32 +0300