| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The functions currently leaving dangling pointers in the passed-in path
leading to hard to debug bugs in the long run. Ensure that the path is
left in pristine state just like we do in e.g., path_parentat() and
other helpers.
Link: https://lore.kernel.org/20250414-rennt-wimmeln-f186c3a780f1@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Bartlett Lake has a P-core only product with Raptor Cove.
[ mingo: Switch around the define as pointed out by Christian Ludloff:
Ratpr Cove is the core, Bartlett Lake is the product.
Signed-off-by: Pi Xiange <xiange.pi@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Christian Ludloff <ludloff@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: "Ahmed S. Darwish" <darwi@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250414032839.5368-1-xiange.pi@intel.com
|
|
Since the link_up boolean field of struct nvmet_pci_epf_ctrl is always
set to true when nvmet_pci_epf_start_ctrl() is called, assign true to
this field in nvmet_pci_epf_start_ctrl(). Conversely, since this field
is set to false when nvmet_pci_epf_stop_ctrl() is called, set this field
to false directly inside that function.
While at it, also add information messages to notify the user of the PCI
link state changes to help troubleshoot any link stability issues
without needing to enable debug messages.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When a host shuts down the controller when shutting down but does so
without first disabling the controller, the enable bit remains set in
the controller configuration register. When the host restarts and
attempts to enable the controller again, the
nvmet_pci_epf_poll_cc_work() function is unable to detect the change
from 0 to 1 of the enable bit, and thus the controller is not enabled
again, which result in a device scan timeout on the host. This problem
also occurs if the host shuts down uncleanly or if the PCIe link goes
down: as the CC.EN value is not reset, the controller is not enabled
again when the host restarts.
Fix this by introducing the function nvmet_pci_epf_clear_ctrl_config()
to clear the CC and CSTS registers of the controller when the PCIe link
is lost (nvmet_pci_epf_stop_ctrl() function), or when starting the
controller fails (nvmet_pci_epf_enable_ctrl() fails). Also use this
function in nvmet_pci_epf_init_bar() to simplify the initialization of
the CC and CSTS registers.
Furthermore, modify the function nvmet_pci_epf_disable_ctrl() to clear
the CC.EN bit and write this updated value to the BAR register when the
controller is shutdown by the host, to ensure that upon restart, we can
detect the host setting CC.EN.
Fixes: 0faa0fe6f90e ("nvmet: New NVMe PCI endpoint function target driver")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
For a command that is normally processed through the command request
execute() function, the completion entry for the command is initialized
by __nvmet_req_complete() and nvmet_pci_epf_cq_work() only needs to set
the status field and the phase of the completion entry before posting
the entry to the completion queue.
However, for commands that are failed due to an internal error (e.g. the
command data buffer allocation fails), the command request execute()
function is not called and __nvmet_req_complete() is never executed for
the command, leaving the command completion entry uninitialized. For
such command failed before calling req->execute(), the host ends up
seeing completion entries with an invalid submission queue ID and
command ID.
Avoid such issue by always fully initilizing a command completion entry
in nvmet_pci_epf_cq_work(), setting the entry submission queue head, ID
and command ID.
Fixes: 0faa0fe6f90e ("nvmet: New NVMe PCI endpoint function target driver")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When compiling with C=1, the following sparse warning is generated:
auth.c:243:23: warning: Using plain integer as NULL pointer
Avoid this warning by using NULL to instead of 0 to set the sq tls_key
pointer.
Fixes: fa2e0f8bbc68 ("nvmet-tcp: support secure channel concatenation")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When rapidly rescanning for new namespaces nvme_mpath_add_sysfs_link() may be
called for a block device not added to sysfs. But NVME_NS_SYSFS_ATTR_LINK
had already been set, so when checking this device a second time we will fail
to create the link.
Fix this by exchanging the order of the block device check and the
NVME_NS_SYSFS_ATTR_LINK bit check.
Fixes: 4dbd2b2ebe4c ("nvme-multipath: Add visibility for round-robin io-policy")
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>**
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Commit 62baf70c3274 caused the ANA log page to be re-read, even on
controllers that do not support ANA. While this should generally
harmless, some controllers hang on the unsupported log page and
never finish probing.
Fixes: 62baf70c3274 ("nvme: re-read ANA log page after ns scan completes")
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Tested-by: Srikanth Aithal <sraithal@amd.com>
[hch: more detailed commit message]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
|
|
Jacob Keller says:
====================
net: ptp: driver opt-in for supported PTP ioctl flags
Both the PTP_EXTTS_REQUEST(2) and PTP_PEROUT_REQUEST(2) ioctls take flags
from userspace to modify their behavior. Drivers are supposed to check
these flags, rejecting requests for flags they do not support.
Many drivers today do not check these flags, despite many attempts to
squash individual drivers as these mistakes are discovered. Additionally,
any new flags added can require updating every driver if their validation
checks are poorly implemented.
It is clear that driver authors will not reliably check for unsupported
flags. The root of the issue is that drivers must essentially opt out of
every flag, rather than opt in to the ones they support.
Instead, lets introduce .supported_perout_flags and .supported_extts_flags
to the ptp_clock_info structure. This is a pattern taken from several
ethtool ioctls which enabled validation to move out of the drivers and into
the shared ioctl handlers. This pattern has worked quite well and makes it
much more difficult for drivers to accidentally accept flags they do not
support.
With this approach, drivers which do not set the supported fields will have
the core automatically reject any request which has flags. Drivers must opt
in to each flag they support by adding it to the list, with the sole
exception being the PTP_ENABLE_FEATURE flag of the PTP_EXTTS_REQUEST ioctl
since it is entirely handled by the ptp_chardev.c file.
This change will ensure that all current and future drivers are safe for
extension when we need to extend these ioctls.
I opted to keep all the driver changes into one patch per ioctl type. The
changes are relatively small and straight forward. Splitting it per-driver
would make the series large, and also break flags between the introduction
of the supported field and setting it in each driver.
The non-Intel drivers are compile-tested only, and I would appreciate
confirmation and testing from their respective maintainers. (It is also
likely that I missed some of the driver authors especially for drivers
which didn't make any checks at all and do not set either of the supported
flags yet)
v1: https://lore.kernel.org/20250408-jk-supported-perout-flags-v1-0-d2f8e3df64f3@intel.com
====================
Link: https://patch.msgid.link/20250414-jk-supported-perout-flags-v2-0-f6b17d15475c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PTP_PEROUT_REQUEST2 ioctl has gained support for flags specifying
specific output behavior including PTP_PEROUT_ONE_SHOT,
PTP_PEROUT_DUTY_CYCLE, PTP_PEROUT_PHASE.
Driver authors are notorious for not checking the flags of the request.
This results in misinterpreting the request, generating an output signal
that does not match the requested value. It is anticipated that even more
flags will be added in the future, resulting in even more broken requests.
Expecting these issues to be caught during review or playing whack-a-mole
after the fact is not a great solution.
Instead, introduce the supported_perout_flags field in the ptp_clock_info
structure. Update the core character device logic to explicitly reject any
request which has a flag not on this list.
This ensures that drivers must 'opt in' to the flags they support. Drivers
which don't set the .supported_perout_flags field will not need to check
that unsupported flags aren't passed, as the core takes care of this.
Update the drivers which do support flags to set this new field.
Note the following driver files set n_per_out to a non-zero value but did
not check the flags at all:
• drivers/ptp/ptp_clockmatrix.c
• drivers/ptp/ptp_idt82p33.c
• drivers/ptp/ptp_fc3.c
• drivers/net/ethernet/ti/am65-cpts.c
• drivers/net/ethernet/aquantia/atlantic/aq_ptp.c
• drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c
• drivers/net/dsa/sja1105/sja1105_ptp.c
• drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp.c
• drivers/net/ethernet/mscc/ocelot_vsc7514.c
• drivers/net/ethernet/intel/i40e/i40e_ptp.c
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250414-jk-supported-perout-flags-v2-2-f6b17d15475c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PTP_EXTTS_REQUEST(2) ioctl has a flags field which specifies how the
external timestamp request should behave. This includes which edge of the
signal to timestamp, as well as a specialized "offset" mode. It is expected
that more flags will be added in the future.
Driver authors routinely do not check the flags, often accepting requests
with flags which they do not support. Even drivers which do check flags may
not be future-proofed to reject flags not yet defined. Thus, any future
flag additions often require manually updating drivers to reject these
flags.
This approach of hoping we catch flag checks during review, or playing
whack-a-mole after the fact is the wrong approach.
Introduce the "supported_extts_flags" field to the ptp_clock_info
structure. This field defines the set of flags the device actually
supports.
Update the core character device logic to check this field and reject
unsupported requests. Getting this right is somewhat tricky. First, to
avoid unnecessary repetition and make basic functionality work when
.supported_extts_flags is 0, the core always accepts the PTP_ENABLE_FEATURE
flag. This flag is used to set the 'on' parameter to the .enable function
and is thus always 'supported' by all drivers.
For backwards compatibility, the PTP_RISING_EDGE and PTP_FALLING_EDGE flags
are merely "hints" when using the old PTP_EXTTS_REQUEST ioctl, and are not
expected to be enforced. If the user issues PTP_EXTTS_REQUEST2, the
PTP_STRICT_FLAGS flag is added which is supposed to inform the driver to
strictly validate the flags and reject unsupported requests. To handle
this, first check if the driver reports PTP_STRICT_FLAGS support. If it
does not, then always allow the PTP_RISING_EDGE and PTP_FALLING_EDGE flags.
This keeps backwards compatibility with the original PTP_EXTTS_REQUEST
ioctl where these flags are not guaranteed to be honored.
This way, drivers which do not set the supported_extts_flags will continue
to accept requests for the original PTP_EXTTS_REQUEST ioctl. The core will
automatically reject requests with new flags, and correctly reject requests
with PTP_STRICT_FLAGS, where the driver is supposed to strictly validate
the flags.
Update the various drivers, refactoring their validation logic into the
.supported_extts_flags field. For consistency and readability,
PTP_ENABLE_FEATURE is not set in the supported flags list, and
PTP_EXTTS_EDGES is expanded to PTP_RISING_EDGE | PTP_FALLING_EDGE in all
cases.
Note the following driver files set n_ext_ts to a non-zero value but did
not check flags at all:
• drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp.c
• drivers/net/ethernet/freescale/enetc/enetc_ptp.c
• drivers/net/ethernet/intel/i40e/i40e_ptp.c
• drivers/net/ethernet/marvell/octeontx2/nic/otx2_ptp.c
• drivers/net/ethernet/renesas/ravb_ptp.c
• drivers/net/ethernet/renesas/rtsn.c
• drivers/net/ethernet/renesas/rtsn.h
• drivers/net/ethernet/ti/am65-cpts.c
• drivers/net/ethernet/ti/cpts.h
• drivers/net/ethernet/ti/icssg/icss_iep.c
• drivers/net/ethernet/xscale/ptp_ixp46x.c
• drivers/net/phy/bcm-phy-ptp.c
• drivers/ptp/ptp_ocp.c
• drivers/ptp/ptp_pch.c
• drivers/ptp/ptp_qoriq.c
These drivers behavior does change slightly: they will now reject the
PTP_EXTTS_REQUEST2 ioctl, because they do not strictly validate their
flags. This also makes them no longer incorrectly accept PTP_EXT_OFFSET.
Also note that the renesas ravb driver does not support PTP_STRICT_FLAGS.
We could leave the .supported_extts_flags as 0, but I added the
PTP_RISING_EDGE | PTP_FALLING_EDGE since the driver previously manually
validated these flags. This is equivalent to 0 because the core will allow
these flags regardless unless PTP_STRICT_FLAGS is also set.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250414-jk-supported-perout-flags-v2-1-f6b17d15475c@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-04-15
The first patch is by Davide Caratti and fixes the missing derement in
the protocol inuse counter for the J1939 CAN protocol.
The last patch is by Weizhao Ouyang and fixes a broken quirks check in
the rockchip CAN-FD driver.
* tag 'linux-can-fixes-for-6.15-20250415' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: rockchip_canfd: fix broken quirks checks
can: fix missing decrement of j1939_proto.inuse_idx
====================
Link: https://patch.msgid.link/20250415103401.445981-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The CONFIG_BLK_DEV_UBLK help text suggests setting the config option to
Y so task_work_add() can be used to dispatch I/O, improving performance.
However, this mechanism was removed in commit 29dc5d06613f2 ("ublk: kill
queuing request by task_work_add"). So remove this paragraph from the
config help text.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250416004111.3242817-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
vfs_iter_{read,write} always perform direct I/O when the file has the
O_DIRECT flag set, which breaks disabling direct I/O using the
LOOP_SET_STATUS / LOOP_SET_STATUS64 ioctls.
This was recenly reported as a regression, but as far as I can tell
was only uncovered by better checking for block sizes and has been
around since the direct I/O support was added.
Fix this by using the existing aio code that calls the raw read/write
iter methods instead. Note that despite the comments there is no need
for block drivers to ever call flush_dcache_page themselves, and the
call is a left-over from prehistoric times.
Fixes: ab1cb278bc70 ("block: loop: introduce ioctl command of LOOP_SET_DIRECT_IO")
Reported-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20250409130940.3685677-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It was originally meant to replace the dev_hold with netdev_hold. But this
was missed in batadv_hardif_enable_interface(). As result, there was an
imbalance and a hang when trying to remove the mesh-interface with
(previously) active hard-interfaces:
unregister_netdevice: waiting for batadv0 to become free. Usage count = 3
Fixes: 00b35530811f ("batman-adv: adopt netdev_hold() / netdev_put()")
Suggested-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+ff3aa851d46ab82953a3@syzkaller.appspotmail.com
Reported-by: syzbot+4036165fc595a74b09b2@syzkaller.appspotmail.com
Reported-by: syzbot+c35d73ce910d86c0026e@syzkaller.appspotmail.com
Reported-by: syzbot+48c14f61594bdfadb086@syzkaller.appspotmail.com
Reported-by: syzbot+f37372d86207b3bb2941@syzkaller.appspotmail.com
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250414-double_hold_fix-v5-1-10e056324cde@narfation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ido Schimmel says:
====================
fib_rules: Fix iif / oif matching on L3 master device
Patch #1 fixes a recently reported regression regarding FIB rules that
match on iif / oif being a VRF device.
Patch #2 adds test cases to the FIB rules selftest.
====================
Link: https://patch.msgid.link/20250414172022.242991-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests for FIB rules that match on iif / oif being a VRF device. Test
both good and bad flows.
With previous patch ("net: fib_rules: Fix iif / oif matching on L3
master device"):
# ./fib_rule_tests.sh
[...]
Tests passed: 328
Tests failed: 0
Without it:
# ./fib_rule_tests.sh
[...]
Tests passed: 324
Tests failed: 4
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250414172022.242991-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before commit 40867d74c374 ("net: Add l3mdev index to flow struct and
avoid oif reset for port devices") it was possible to use FIB rules to
match on a L3 domain. This was done by having a FIB rule match on iif /
oif being a L3 master device. It worked because prior to the FIB rule
lookup the iif / oif fields in the flow structure were reset to the
index of the L3 master device to which the input / output device was
enslaved to.
The above scheme made it impossible to match on the original input /
output device. Therefore, cited commit stopped overwriting the iif / oif
fields in the flow structure and instead stored the index of the
enslaving L3 master device in a new field ('flowi_l3mdev') in the flow
structure.
While the change enabled new use cases, it broke the original use case
of matching on a L3 domain. Fix this by interpreting the iif / oif
matching on a L3 master device as a match against the L3 domain. In
other words, if the iif / oif in the FIB rule points to a L3 master
device, compare the provided index against 'flowi_l3mdev' rather than
'flowi_{i,o}if'.
Before cited commit, a FIB rule that matched on 'iif vrf1' would only
match incoming traffic from devices enslaved to 'vrf1'. With the
proposed change (i.e., comparing against 'flowi_l3mdev'), the rule would
also match traffic originating from a socket bound to 'vrf1'. Avoid that
by adding a new flow flag ('FLOWI_FLAG_L3MDEV_OIF') that indicates if
the L3 domain was derived from the output interface or the input
interface (when not set) and take this flag into account when evaluating
the FIB rule against the flow structure.
Avoid unnecessary checks in the data path by detecting that a rule
matches on a L3 master device when the rule is installed and marking it
as such.
Tested using the following script [1].
Output before 40867d74c374 (v5.4.291):
default dev dummy1 table 100 scope link
default dev dummy1 table 200 scope link
Output after 40867d74c374:
default dev dummy1 table 300 scope link
default dev dummy1 table 300 scope link
Output with this patch:
default dev dummy1 table 100 scope link
default dev dummy1 table 200 scope link
[1]
#!/bin/bash
ip link add name vrf1 up type vrf table 10
ip link add name dummy1 up master vrf1 type dummy
sysctl -wq net.ipv4.conf.all.forwarding=1
sysctl -wq net.ipv4.conf.all.rp_filter=0
ip route add table 100 default dev dummy1
ip route add table 200 default dev dummy1
ip route add table 300 default dev dummy1
ip rule add prio 0 oif vrf1 table 100
ip rule add prio 1 iif vrf1 table 200
ip rule add prio 2 table 300
ip route get 192.0.2.1 oif dummy1 fibmatch
ip route get 192.0.2.1 iif dummy1 from 198.51.100.1 fibmatch
Fixes: 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices")
Reported-by: hanhuihui <hanhuihui5@huawei.com>
Closes: https://lore.kernel.org/netdev/ec671c4f821a4d63904d0da15d604b75@huawei.com/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250414172022.242991-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit under Fixes converted tx_prod to be free running but missed
masking it on the Tx error path. This crashes on error conditions,
for example when DMA mapping fails.
Fixes: 6d1add95536b ("bnxt_en: Modify TX ring indexing logic.")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250414143210.458625-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If multicast snooping is enabled, multicast packets may not always end up
on the local bridge interface, if the host is not a member of the multicast
group. Similar to how IFF_PROMISC allows all packets to be received
locally, let IFF_ALLMULTI allow all multicast packets to be received.
OpenWrt uses a user space daemon for DHCPv6/RA/NDP handling, and in relay
mode it sets the ALLMULTI flag in order to receive all relevant queries on
the network.
This works for normal network interfaces and non-snooping bridges, but not
snooping bridges (unless multicast routing is enabled).
Reported-by: Felix Fietkau <nbd@nbd.name>
Closes: https://github.com/openwrt/openwrt/issues/15857#issuecomment-2662851243
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/OSZPR01MB8434308370ACAFA90A22980798B32@OSZPR01MB8434.jpnprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A reference to the device tree node is stored in a private struct, thus
the reference count has to be incremented. Also, decrement the count on
device removal and in the error path.
Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250414083942.4015060-1-mwalle@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
drivers/net/phy/Kconfig is included from drivers/net/Kconfig in an
"if NETDEVICES" section. Therefore we don't have to duplicate the
dependency here. And if e.g. PHYLINK is selected somewhere, then the
dependency is ignored anyway (see note in Kconfig help).
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/085892cd-aa11-4c22-bf8a-574a5c6dcd7c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adding error pointer check after calling otx2_mbox_get_rsp().
This is similar to the commit bd3110bc102a
("octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_flows.c").
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Fixes: 6c40ca957fe5 ("octeontx2-pf: Adds TC offload support")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250412183327.3550970-1-chenyuan0y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While developing the fix for the buffer sizing issue in [0], I noticed
that the kernel will happily accept a long list of actions for a filter,
and then just silently truncate that list down to a maximum of 32
actions.
That seems less than ideal, so this patch changes the action parsing to
return an error message and refuse to create the filter in this case.
This results in an error like:
# ip link add type veth
# tc qdisc replace dev veth0 root handle 1: fq_codel
# tc -echo filter add dev veth0 parent 1: u32 match u32 0 0 $(for i in $(seq 33); do echo action pedit munge ip dport set 22; done)
Error: Only 32 actions supported per filter.
We have an error talking to the kernel
Instead of just creating a filter with 32 actions and dropping the last
one.
This is obviously a change in UAPI. But seeing as creating more than 32
filters has never actually *worked*, it seems that returning an explicit
error is better, and any use cases that get broken by this were already
broken just in more subtle ways.
[0] https://lore.kernel.org/r/20250407105542.16601-1-toke@redhat.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250409145523.164506-1-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 479380efe1625e251008d24b2810283db60d6fcd.
The reset_method attribute on a PCI device is only intended to manage the
availability of function scoped resets for a device. It was never intended
to restrict resets targeting the bus or slot.
In introducing a restriction that each device must support function level
reset by testing pci_reset_supported(), we essentially create a catch-22,
that a device must have a function scope reset in order to support bus/slot
reset, when we use bus/slot reset to effect a reset of a device that does
not support a function scoped reset, especially multi-function devices.
This breaks the majority of uses cases where vfio-pci uses bus/slot resets
to manage multifunction devices that do not support function scoped resets.
Fixes: 479380efe162 ("PCI: Avoid reset when disabled via sysfs")
Reported-by: Cal Peake <cp@absolutedigital.net>
Closes: https://lore.kernel.org/all/808e1111-27b7-f35b-6d5c-5b275e73677b@absolutedigital.net
Reported-by: Athul Krishna <athul.krishna.kr@protonmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220010
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250414211828.3530741-1-alex.williamson@redhat.com
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add dma_alloc_attrs() and dma_free_attrs() helpers to fix a build
error when CONFIG_HAS_DMA is not enabled.
Note that when CONFIG_HAS_DMA is enabled, dma_alloc_attrs() and
dma_free_attrs() are included in both bindings_generated.rs and
bindings_helpers_generated.rs. The former takes precedence so behavior
remains unchanged in that case.
This fixes the following build error on UML:
error[E0425]: cannot find function `dma_alloc_attrs` in crate `bindings`
--> rust/kernel/dma.rs:171:23
|
171 | bindings::dma_alloc_attrs(
| ^^^^^^^^^^^^^^^ help: a function with a similar name exists: `dma_alloc_pages`
|
::: rust/bindings/bindings_generated.rs:44568:5
|
44568 | / pub fn dma_alloc_pages(
44569 | | dev: *mut device,
44570 | | size: usize,
44571 | | dma_handle: *mut dma_addr_t,
44572 | | dir: dma_data_direction,
44573 | | gfp: gfp_t,
44574 | | ) -> *mut page;
| |___________________- similarly named function `dma_alloc_pages` defined here
error[E0425]: cannot find function `dma_free_attrs` in crate `bindings`
--> rust/kernel/dma.rs:293:23
|
293 | bindings::dma_free_attrs(
| ^^^^^^^^^^^^^^ help: a function with a similar name exists: `dma_free_pages`
|
::: rust/bindings/bindings_generated.rs:44577:5
|
44577 | / pub fn dma_free_pages(
44578 | | dev: *mut device,
44579 | | size: usize,
44580 | | page: *mut page,
44581 | | dma_handle: dma_addr_t,
44582 | | dir: dma_data_direction,
44583 | | );
| |______- similarly named function `dma_free_pages` defined here
Fixes: ad2907b4e308 ("rust: add dma coherent allocator abstraction")
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250412000507.157000-1-fujita.tomonori@gmail.com
[ Reworded for relative paths. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Remove the `volatile` qualifier used with __iomem in helper functions
in io.c. These helper functions are just wrappers around the
corresponding accessors so they are unnecessary.
This fixes the following UML build error with CONFIG_RUST enabled:
In file included from rust/helpers/helpers.c:19:
rust/helpers/io.c:12:10: error: passing 'volatile void *' to parameter of type 'void *' discards qualifiers [-Werror,-Wincompatible-pointer-types-discards-qualifiers]
12 | iounmap(addr);
| ^~~~
arch/um/include/asm/io.h:19:42: note: passing argument to parameter 'addr' here
19 | static inline void iounmap(void __iomem *addr)
| ^
1 error generated.
[ Arnd explains [1] that removing the qualifier is the way forward
(thanks!):
Rihgt, I tried this last week when it came up first, removing the
'volatile' annotations in the asm-generic/io.h header and then
all the ones that caused build regressions on arm/arm64/x86
randconfig and allmodconfig builds. This patch is a little
longer than my original version as I did run into a few
regressions later.
As far as I can tell, none of these volatile annotations have
any actual effect, and most of them date back to ancient kernels
where this may have been required.
Leaving it out of the rust interface is clearly the right way,
and it shouldn't be too hard to upstream the changes below
when we need to, but I also don't see any priority to send these.
If anyone wants to help out, I can send them the whole patch.
I created an issue [2] in case someone wants to help. - Miguel ]
Fixes: ce30d94e6855 ("rust: add `io::{Io, IoRaw}` base types")
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/rust-for-linux/0c844b70-19c7-4b14-ba29-fc99ae0d69f0@app.fastmail.com/ [1]
Link: https://github.com/Rust-for-Linux/linux/issues/1156 [2]
Link: https://lore.kernel.org/r/20250412005341.157150-1-fujita.tomonori@gmail.com
[ Reworded for relative paths. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Enabling a (modular) test should not silently enable additional kernel
functionality, as that may increase the attack vector of a product.
Fix this by making PRIME_NUMBERS_KUNIT_TEST depend on PRIME_NUMBERS
instead of selecting it.
After this, one can safely enable CONFIG_KUNIT_ALL_TESTS=m to build
modules for all appropriate tests for ones system, without pulling in
extra unwanted functionality, while still allowing a tester to manually
enable PRIME_NUMBERS and this test suite on a system where PRIME_NUMBERS
is not enabled by default. Resurrect CONFIG_PRIME_NUMBERS=m in
tools/testing/selftests/lib/config for the latter use case.
Fixes: 313b38a6ecb46db4 ("lib/prime_numbers: convert self-test to KUnit")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/40f8a40eef4930d3ac9febd205bc171eb04e171c.1744641237.git.geert@linux-m68k.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Running lib_ubsan.ko on arm64 (without CONFIG_UBSAN_TRAP) panics the
kernel:
[ 31.616546] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: test_ubsan_out_of_bounds+0x158/0x158 [test_ubsan]
[ 31.646817] CPU: 3 UID: 0 PID: 179 Comm: insmod Not tainted 6.15.0-rc2 #1 PREEMPT
[ 31.648153] Hardware name: linux,dummy-virt (DT)
[ 31.648970] Call trace:
[ 31.649345] show_stack+0x18/0x24 (C)
[ 31.650960] dump_stack_lvl+0x40/0x84
[ 31.651559] dump_stack+0x18/0x24
[ 31.652264] panic+0x138/0x3b4
[ 31.652812] __ktime_get_real_seconds+0x0/0x10
[ 31.653540] test_ubsan_load_invalid_value+0x0/0xa8 [test_ubsan]
[ 31.654388] init_module+0x24/0xff4 [test_ubsan]
[ 31.655077] do_one_initcall+0xd4/0x280
[ 31.655680] do_init_module+0x58/0x2b4
That happens because the test corrupts other data in the stack:
400: d5384108 mrs x8, sp_el0
404: f9426d08 ldr x8, [x8, #1240]
408: f85f83a9 ldur x9, [x29, #-8]
40c: eb09011f cmp x8, x9
410: 54000301 b.ne 470 <test_ubsan_out_of_bounds+0x154> // b.any
As there is no guarantee the compiler will order the local variables
as declared in the module:
volatile char above[4] = { }; /* Protect surrounding memory. */
volatile int arr[4];
volatile char below[4] = { }; /* Protect surrounding memory. */
There is another problem where the out-of-bound index is 5 which is larger
than the extra surrounding memory for protection.
So, use a struct to enforce the ordering, and fix the index to be 4.
Also, remove some of the volatiles and rely on OPTIMIZER_HIDE_VAR()
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20250415203354.4109415-1-smostafa@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
CONFIG_UBSAN_INTEGER_WRAP is 'default UBSAN', which is problematic for a
couple of reasons.
The first is that this sanitizer is under active development on the
compiler side to come up with a solution that is maintainable on the
compiler side and usable on the kernel side. As a result of this, there
are many warnings when the sanitizer is enabled that have no clear path
to resolution yet but users may see them and report them in the meantime.
The second is that this option was renamed from
CONFIG_UBSAN_SIGNED_WRAP, meaning that if a configuration has
CONFIG_UBSAN=y but CONFIG_UBSAN_SIGNED_WRAP=n and it is upgraded via
olddefconfig (common in non-interactive scenarios such as CI),
CONFIG_UBSAN_INTEGER_WRAP will be silently enabled again.
Remove 'default UBSAN' from CONFIG_UBSAN_INTEGER_WRAP until it is ready
for regular usage and testing from a broader community than the folks
actively working on the feature.
Cc: stable@vger.kernel.org
Fixes: 557f8c582a9b ("ubsan: Reintroduce signed overflow sanitizer")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250414-drop-default-ubsan-integer-wrap-v1-1-392522551d6b@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
There is a GCC crash bug in the randstruct for latest GCC versions that
is being tickled by landlock[1]. Temporarily disable GCC randstruct for
COMPILE_TEST builds to unbreak CI systems for the coming -rc2. This can
be restored once the bug is fixed.
Suggested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/all/20250407-kbuild-disable-gcc-plugins-v1-1-5d46ae583f5e@kernel.org/ [1]
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250409151154.work.872-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
When we invoke strscpy() with a maximum size of N bytes, it assumes
that:
- It can always read N bytes from the source.
- It always write N bytes (zero-padded) to the destination.
On aarch64 with Memory Tagging Extension enabled if we pass an N that is
bigger then the source buffer, it would previously trigger an MTE fault.
Implement a KASAN KUnit test that triggers the issue with the previous
implementation of read_word_at_a_time() on aarch64 with MTE enabled.
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://linux-review.googlesource.com/id/If88e396b9e7c058c1a4b5a252274120e77b1898a
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250403000703.2584581-3-pcc@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
The call to read_word_at_a_time() in sized_strscpy() is problematic
with MTE because it may trigger a tag check fault when reading
across a tag granule (16 bytes) boundary. To make this code
MTE compatible, let's start using load_unaligned_zeropad()
on architectures where it is available (i.e. architectures that
define CONFIG_DCACHE_WORD_ACCESS). Because load_unaligned_zeropad()
takes care of page boundaries as well as tag granule boundaries,
also disable the code preventing crossing page boundaries when using
load_unaligned_zeropad().
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/If4b22e43b5a4ca49726b4bf98ada827fdf755548
Fixes: 94ab5b61ee16 ("kasan, arm64: enable CONFIG_KASAN_HW_TAGS")
Cc: stable@vger.kernel.org
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250403000703.2584581-2-pcc@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Remove the suppression of the uevents before scanning for partitions.
The partitions inherit their suppression settings from their parent device,
which lead to the uevents being dropped.
This is similar to the same changes for LOOP_CONFIGURE done in
commit bb430b694226 ("loop: LOOP_CONFIGURE: send uevents for partitions").
Fixes: 498ef5c777d9 ("loop: suppress uevents while reconfiguring the device")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20250415-loop-uevent-changed-v3-1-60ff69ac6088@linutronix.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
On malfunctioning hardware, timeout error messages can appear thousands
of times, creating unnecessary system pressure and log bloat. This patch
makes two improvements:
1. Replace dev_err() with dev_err_ratelimited() to prevent log flooding
when hardware errors persist
2. Remove the redundant timeout value parameter from the error message,
as 'ret' is always zero in this error path
These changes reduce logging overhead while maintaining necessary error
reporting for debugging purposes.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250401-tegra-v2-2-126c293ec047@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some machines with tegra_qspi_combined_seq_xfer hardware issues generate
excessive kernel warnings, severely polluting the logs:
dmesg | grep -i "WARNING:.*tegra_qspi_transfer_one_message" | wc -l
94451
This patch replaces WARN_ON with WARN_ON_ONCE for timeout conditions to
reduce log spam. The subsequent error message still prints on each
occurrence, providing sufficient information about the failure, while
the stack trace is only needed once for debugging purposes.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250401-tegra-v2-1-126c293ec047@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
GNU Make 4.3 changed the behavior of `#` inside commands in commit
c6966b323811 ("[SV 20513] Un-escaped # are not comments in function
invocations"):
* WARNING: Backward-incompatibility!
Number signs (#) appearing inside a macro reference or function invocation
no longer introduce comments and should not be escaped with backslashes:
thus a call such as:
foo := $(shell echo '#')
is legal. Previously the number sign needed to be escaped, for example:
foo := $(shell echo '\#')
Now this latter will resolve to "\#". If you want to write makefiles
portable to both versions, assign the number sign to a variable:
H := \#
foo := $(shell echo '$H')
This was claimed to be fixed in 3.81, but wasn't, for some reason.
To detect this change search for 'nocomment' in the .FEATURES variable.
Unlike other commits in the kernel about this issue, such as commit
633174a7046e ("lib/raid6/test/Makefile: Use $(pound) instead of \#
for Make 4.3"), that fixed the issue for newer GNU Makes, in our case
it was the opposite, i.e. we need to fix it for the older ones: someone
building with e.g. 4.2.1 gets the following error:
scripts/Makefile.compiler:81: *** unterminated call to function 'call': missing ')'. Stop.
Thus use the existing variable to fix it.
Reported-by: moyi geek <1441339168@qq.com>
Closes: https://rust-for-linux.zulipchat.com/#narrow/channel/291565/topic/x/near/512001985
Cc: stable@vger.kernel.org
Fixes: e72a076c620f ("kbuild: fix issues with rustc-option")
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250414171241.2126137-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
pm_runtime_autosuspend() got accidentally renamed as
__pm_runtime_autosuspend() whereas the intention in the
patch was to rename pm_runtime_put_autosuspend() only.
Fix it.
Fixes: b7d46644e554 ("PM: runtime: Add pm_runtime_put_autosuspend() replacement")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20250410153106.4146265-2-sakari.ailus@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
commit cb7dd712189f ("octeon_ep_vf: Add driver framework and device
initialization") added octep_vf_wq but it has never been used. Remove it.
Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Closes: https://lore.kernel.org/netdev/Z70bEoTKyeBau52q@gallifrey/
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250414-octeon-wq-v1-1-23700e4bd208@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Panther Lake uses the same DLVR register offsets as Lunar Lake, but the
driver uses the default register offsets table for it by mistake.
Move the selection of register offsets table from the actual attribute
read/write callbacks to proc_thermal_rfim_add() and make it handle
Panther Lake the same way as Lunar Lake. This way it is clean and in
the future such issues can be avoided.
Fixes: e50eeababa94 ("thermal: intel: int340x: Panther Lake DLVR support")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250411115438.594114-1-srinivas.pandruvada@linux.intel.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
DVFS (Dynamic Voltage Frequency Scaling) is still supported for DDR
memory on Lunar Lake and Panther Lake.
Add the missing flag PROC_THERMAL_FEATURE_DVFS.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250410172943.577913-1-srinivas.pandruvada@linux.intel.com
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Russell King says:
====================
net: stmmac: ingenic: cleanups
Another series for another stmmac glue platform.
Convert Ingenic to use the stmmac platform PM ops and the
devm_stmmac_pltfr_probe() helper.
====================
Link: https://patch.msgid.link/Z_0u9pA0Ziop-BuU@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As Ingenic now uses the stmmac platform PM ops, convert it to use
devm_stmmac_pltfr_probe() which will call the plat_dat->init() method
before stmmac_drv_probe() and appropriately cleaning up via the
->exit() method, thus simplifying the code. Using the devm_*()
variant also allows removal of the explicit call to
stmmac_pltfr_remove().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1u4M5S-000YGJ-9K@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the Ingenic glue driver to use the generic stmmac platform
power management operations.
In order to do this, we need to make ingenic_mac_init() arguments
compatible with plat_dat->init() by adding a plat_dat member to struct
ingenic_mac. This allows the custom suspend/resume operations to be
removed, and the PM ops pointer replaced with stmmac_pltfr_pm_ops.
This will adds runtime PM and noirq suspend/resume ops to this driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1u4M5N-000YGD-5i@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using stmmac_pltfr_probe() simplifies the probe function. This will not
only call plat_dat->init (imx_dwmac_init), but also plat_dat->exit
(imx_dwmac_exit) appropriately if stmmac_dvr_probe() fails. This
results in an overall simplification of the glue driver.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u4Flp-000XlM-Tb@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Russell King says:
====================
net: stmmac: anarion: cleanups
A series of cleanups to the anarion glue driver.
Clean up anarion_config_dt() error handling, printing a human readable
error rather than the numeric errno, and use ERR_CAST().
Using a switch statement with incorrect "fallthrough;" for RGMII vs
non-RGMII is unnecessary when we have phy_interface_mode_is_rgmii().
Convert to use the helper.
Use stmmac_pltfr_probe() rahter than open-coding the call to the
init function (which stmmac_pltfr_probe() will do for us.)
Finally, convert to use devm_stmmac_pltfr_probe() which allows the
removal of the .remove initialiser in the driver structure.
Not tested on hardware.
====================
Link: https://patch.msgid.link/Z_zP9BvZlqeq3Ssl@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert anarion to use devm_stmmac_pltfr_probe() which allows the
removal of an explicit call to stmmac_pltfr_remove().
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u4Flf-000XjS-Fi@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than open-coding the call to anarion_gmac_init() and then
stmmac_dvr_probe(), omitting the cleanup of calling
anarion_gmac_exit(), use stmmac_pltfr_probe() which will handle this
for us.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u4Fla-000XjM-Bw@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
anarion_config_dt() used a switch statement to check for the RGMII
modes, complete with an unnecessary "fallthrough", and also printed
the numerical value of the PHY interface mode on error. Clean this
up using the phy_interface_mode_is_rgmii() helper, and print the
English version of the PHY interface mode on error.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u4FlV-000XjG-83@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
