| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Previously Q-counters data was being allocated over the PF for all of
the available vports, however that isn't necessary.
Since each VF or SF has a Q-counter allocated for itself.
So we only need to allocate two counters data structures, one for the
device counters, and one for all the other vports to expose the
representors, since they only need to read from it in order to
determine mainly counters numbers and names, so they can all share.
This in turn also solves a bug we previously had where we couldn't
switch the device to switchdev mode when there were more than 128 SF/VFs
configured, since that is the maximum amount of Q-counters available for
a single port
Fixes: d22467a71ebe ("RDMA/mlx5: Expand switchdev Q-counters to expose representor statistics")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/f54671df16e2227a069b229b33b62cd9ee24c475.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
A misbehaved user can create a steering anchor that points to a kernel
flow table and then destroy the anchor without freeing the associated
STC. This creates a problem as the kernel can't destroy the flow
table since there is still a reference to it. As a result, this can
exhaust all available flow table resources, preventing other users from
using the RDMA device.
To prevent this problem, a solution is implemented where a special flow
table with two steering rules is created when a user creates a steering
anchor for the first time. The rules include one that drops all traffic
and another that points to the kernel flow table. If the steering anchor
is destroyed, only the rule pointing to the kernel's flow table is removed.
Any traffic reaching the special flow table after that is dropped.
Since the special flow table is not destroyed when the steering anchor is
destroyed, any issues are prevented from occurring. The remaining resources
are only destroyed when the RDMA device is destroyed, which happens after
all DEVX objects are freed, including the STCs, thus mitigating the issue.
Fixes: 0c6ab0ca9a66 ("RDMA/mlx5: Expose steering anchor to userspace")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Link: https://lore.kernel.org/r/b4a88a871d651fa4e8f98d552553c1cfe9ba2cd6.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Delay drop data is initiated for PFs that have the capability of
rq_delay_drop and are in roce profile.
However, PFs with RAW ethernet profile do not initiate delay drop data
on function load, causing kernel panic if delay drop struct members are
accessed later on in case a dropless RQ is created.
Thus, stage the delay drop initialization as part of RAW ethernet
PF loading process.
Fixes: b5ca15ad7e61 ("IB/mlx5: Add proper representors support")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Link: https://lore.kernel.org/r/2e9d386785043d48c38711826eb910315c1de141.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Biggest news is that Andi Shyti steps in for maintaining the
controller drivers. Thank you very much!
Other than that, one new driver maintainer and the rest is usual
driver bugfixes. at24 has a Kconfig dependecy fix"
* tag 'i2c-for-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Add entries for Renesas RZ/V2M I2C driver
eeprom: at24: also select REGMAP
i2c: sprd: Delete i2c adapter in .remove's error path
i2c: mv64xxx: Fix reading invalid status value in atomic mode
i2c: designware: fix idx_write_cnt in read loop
i2c: mchp-pci1xxxx: Avoid cast to incompatible function type
i2c: img-scb: Fix spelling mistake "innacurate" -> "inaccurate"
MAINTAINERS: Add myself as I2C host drivers maintainer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fixes from Vinod Koul:
"Core fix for missing flag clear, error patch handling in qcom driver
and BIOS quirk for HP Spectre x360:
- HP Spectre x360 soundwire DMI quirk
- Error path handling for qcom driver
- Core fix for missing clear of alloc_slave_rt"
* tag 'soundwire-6.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: stream: Add missing clear of alloc_slave_rt
soundwire: qcom: add proper error paths in qcom_swrm_startup()
soundwire: dmi-quirks: add new mapping for HP Spectre x360
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes this time are for the Qualcomm Snapdragon
platforms.
There are bug fixes for error handling in Qualcomm icc-bwmon,
rpmh-rsc, ramp_controller and rmtfs driver as well as the AMD tee
firmware driver and a missing initialization in the Arm ff-a firmware
driver. The Qualcomm RPMh and EDAC drivers need some rework to work
correctly on all supported chips.
The DT fixes include:
- i.MX8 fixes for gpio, pinmux and clock settings
- ADS touchscreen gpio polarity settings in several machines
- Address dtb warnings for caches, panel and input-enable properties
on Qualcomm platforms
- Incorrect data on qualcomm platforms fir SA8155P power domains,
SM8550 LLCC, SC7180-lite SDRAM frequencies and SM8550 soundwire
- Remoteproc firmware paths are corrected for Sony Xperia 10 IV"
* tag 'arm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
firmware: arm_ffa: Set handle field to zero in memory descriptor
ARM: dts: Fix erroneous ADS touchscreen polarities
arm64: dts: imx8mn-beacon: Fix SPI CS pinmux
arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
arm64: dts: imx8qm-mek: correct GPIOs for USDHC2 CD and WP signals
EDAC/qcom: Get rid of hardcoded register offsets
EDAC/qcom: Remove superfluous return variable assignment in qcom_llcc_core_setup()
arm64: dts: qcom: sm8550: Use the correct LLCC register scheme
dt-bindings: cache: qcom,llcc: Fix SM8550 description
arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards
arm64: dts: qcom: sm8550: use uint16 for Soundwire interval
soc: qcom: rpmhpd: Add SA8155P power domains
arm64: dts: qcom: Split out SA8155P and use correct RPMh power domains
dt-bindings: power: qcom,rpmpd: Add SA8155P
soc: qcom: Rename ice to qcom_ice to avoid module name conflict
soc: qcom: rmtfs: Fix error code in probe()
soc: qcom: ramp_controller: Fix an error handling path in qcom_ramp_controller_probe()
ARM: dts: at91: sama7g5ek: fix debounce delay property for shdwc
ARM: at91: pm: fix imbalanced reference counter for ethernet devices
arm64: dts: qcom: sm6375-pdx225: Fix remoteproc firmware paths
...
|
|
In the last step of the EEH recovery process, the EEH driver calls into
bnx2x_io_resume() to re-initialize the NIC hardware via the function
bnx2x_nic_load(). If an error occurs during bnx2x_nic_load(), OS and
hardware resources are released and an error code is returned to the
caller. When called from bnx2x_io_resume(), the return code is ignored
and the network interface is brought up unconditionally. Later attempts
to send a packet via this interface result in a page fault due to a null
pointer reference.
This patch checks the return code of bnx2x_nic_load(), prints an error
message if necessary, and does not enable the interface.
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
netfilter pull request 23-06-08
Pablo Neira Ayuso says:
====================
The following patchset contains Netfilter fixes for net:
1) Add commit and abort set operation to pipapo set abort path.
2) Bail out immediately in case of ENOMEM in nfnetlink batch.
3) Incorrect error path handling when creating a new rule leads to
dangling pointer in set transaction list.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a shift wrapping bug in this code on 32-bit architectures.
NETLBL_CATMAP_MAPTYPE is u64, bitmap is unsigned long.
Every second 32-bit word of catmap becomes corrupted.
Signed-off-by: Dmitry Mastykin <dmastykin@astralinux.ru>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Naveen Mamindlapalli says:
====================
RVU NIX AF driver fixes
This patch series contains few fixes to the RVU NIX AF driver.
The first patch modifies the driver check to validate whether the req count
for contiguous and non-contiguous arrays is less than the maximum limit.
The second patch fixes HW lbk interface link credit programming.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix LBK link credits on CN10K to be same as CN9K i.e
16 * MAX_LBK_DATA_RATE instead of current scheme of
calculation based on LBK buf length / FIFO size.
Fixes: 6e54e1c5399a ("octeontx2-af: cn10K: Add MTU configuration")
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
txschq_alloc response have two different arrays to store continuous
and non-continuous schedulers of each level. Requested count should
be checked for each array separately.
Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology")
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Yoshihiro Shimoda says:
====================
net: renesas: rswitch: Improve perfromance of TX/RX
This patch series is based on net-next.git / main branch [1]. This patch
series can improve perfromance of TX in a specific condition. The previous code
used "global rate limiter" feature so that this is possible to cause
performance down if we use multiple ports at the same time. To resolve this
issue, use "hardware pause" features of GWCA and COMA. Note that this is not
related to the ethernet PAUSE frames.
< UDP TX by iperf3 >
before: about 450Mbps on both tsn0 and tsn1
after: about 950Mbps on both tsn0 and tsn1
Also, this patch series can improve performance of RX by using
napi_gro_receive().
< TCP RX by iperf >
before: about 670Mbps on tsn0
after: about 840Mbps on tsn0
[1]
The commit e06bd5e3adae ("Merge branch 'followup-fixes-for-the-dwmac-and-altera-lynx-conversion'")
Changes from v3:
https://lore.kernel.org/all/20230607015641.1724057-1-yoshihiro.shimoda.uh@renesas.com/
- Rebased on the latest net-next.git / main branch.
- Added Reviewed-by in the patch 2/2. (Maciej, thanks!)
- Fix typos in the commit description in the patch 2/2.
Changes from v2:
https://lore.kernel.org/all/20230606085558.1708766-1-yoshihiro.shimoda.uh@renesas.com/
- Rebased on the latest net-next.git / main branch.
- Added Reviewed-by in the patch 1/2. (Maciej, thanks!)
- Revise the commit description in the patch 2/2.
- Add definition to remove magic hardcoded numbers in the patch 2/2.
Changes from v1:
https://lore.kernel.org/all/20230529080840.1156458-1-yoshihiro.shimoda.uh@renesas.com/
- Rebased on the latest net-next.git / main branch.
- Use "hardware pause" feature instead of "per-queue limiter" feature.
- Drop refactaring for "per-queue limiter".
- Drop dt-bindings update because "hardware pause" doesn't need additional
clock information.
- Use napi_gro_receive() to improve RX performance.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since this driver used the "global rate limiter" feature of GWCA,
the TX performance of each port was reduced when multiple ports
transmitted frames simultaneously. To improve performance, remove
the use of the "global rate limiter" feature and use "hardware pause"
features of the following:
- "per priority pause" of GWCA
- "global pause" of COMA
Note that these features are not related to the ethernet PAUSE frame.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This hardware can receive multiple frames so that using
napi_gro_receive() instead of netif_receive_skb() gets good
performance of RX.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Edward Cree says:
====================
sfc: TC encap actions offload
This series adds support for offloading TC tunnel_key set actions to the
EF100 driver, supporting VxLAN and GENEVE tunnels over IPv4 or IPv6.
====================
Link: https://lore.kernel.org/r/cover.1686240142.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support constructing VxLAN and GENEVE headers, on either IPv4 or IPv6,
using the neighbouring information obtained in encap->neigh to
populate the Ethernet header.
Note that the ef100 hardware does not insert UDP checksums when
performing encap, so for IPv6 the remote endpoint will need to be
configured with udp6zerocsumrx or equivalent.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For each neighbour we're interested in, create a struct efx_neigh_binder
object which has a list of all the encap_actions using it. When we
receive a neighbouring update (through the netevent notifier), find the
corresponding efx_neigh_binder and update all its users.
Since the actual generation of encap headers is still only a stub, the
resulting rules still get left on fallback actions.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Besides the raw header data, also pass the tunnel type, so that the
hardware knows it needs to update the IP Total Length and UDP Length
fields (and corresponding checksums) for each packet.
Also, populate the ENCAP_HEADER_ID field in efx_mae_alloc_action_set()
with the fw_id returned from efx_mae_allocate_encap_md().
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
efx_mae_update_rule() changes the action-set-list attached to an MAE
flow rule in the Action Rule Table.
We will use this when neighbouring updates change encap actions.
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create software objects to manage the metadata for encap actions that
can be attached to TC rules. However, since we don't yet have the
neighbouring information (needed to generate the Ethernet header),
all rules with encap actions are marked as "unready" and thus insert
the fallback action into hardware rather than actually offloading the
encapsulation action.
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When offloading a TC encap action, the action information for the
hardware might not be "ready": if there's currently no neighbour entry
available for the destination address, we can't construct the Ethernet
header to prepend to the packet. In this case, we still offload the
flow rule, but with its action-set-list ID pointing at a "fallback"
action which simply delivers the packet to its default destination (as
though no flow rule had matched), thus allowing software TC to handle
it. Later, when we receive a neighbouring update that allows us to
construct the encap header, the rule will become "ready" and we will
update its action-set-list ID in hardware to point at the actual
offloaded actions.
This patch sets up these fallback ASLs, but does not yet use them.
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move declarations into include/net/gso.h and code into net/core/gso.c
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230608191738.3947077-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-06-08 (ice)
This series contains updates to ice driver only.
Simon Horman stops null pointer dereference for GNSS error path.
Kamil fixes memory leak when downing interface when XDP is enabled.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix XDP memory leak when NIC is brought up and down
ice: Don't dereference NULL in ice_gnss_read error path
====================
Link: https://lore.kernel.org/r/20230608200051.451752-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enable more than 32 IRQs by removing the u32 bit mask in
iavf_irq_enable_queues(). There is no need for the mask as there are no
callers that select individual IRQs through the bitmask. Also, if the PF
allocates more than 32 IRQs, this mask will prevent us from using all of
them.
Modify the comment in iavf_register.h to show that the maximum number
allowed for the IRQ index is 63 as per the iAVF standard 1.0 [1].
link: [1] https://www.intel.com/content/dam/www/public/us/en/documents/product-specifications/ethernet-adaptive-virtual-function-hardware-spec.pdf
Fixes: 5eae00c57f5e ("i40evf: main driver core")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230608200226.451861-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: unify PM interfaces
These patches from Geliang better isolate the two MPTCP path-managers by
avoiding calling userspace PM functions from the in-kernel PM. Instead,
new functions declared in pm.c directly dispatch to the right PM.
In addition to have a clearer code, this also avoids a bit of duplicated
checks.
This is a refactoring, there is no behaviour change intended here.
====================
Link: https://lore.kernel.org/r/20230608-upstream-net-next-20230608-mptcp-unify-pm-interfaces-v1-0-b301717c9ff5@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch unifies the three PM set_flags() interfaces:
mptcp_pm_nl_set_flags() in mptcp/pm_netlink.c for the in-kernel PM and
mptcp_userspace_pm_set_flags() in mptcp/pm_userspace.c for the
userspace PM.
They'll be switched in the common PM infterface mptcp_pm_set_flags() in
mptcp/pm.c based on whether token is NULL or not.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch unifies the three PM get_flags_and_ifindex_by_id() interfaces:
mptcp_pm_nl_get_flags_and_ifindex_by_id() in mptcp/pm_netlink.c for the
in-kernel PM and mptcp_userspace_pm_get_flags_and_ifindex_by_id() in
mptcp/pm_userspace.c for the userspace PM.
They'll be switched in the common PM infterface
mptcp_pm_get_flags_and_ifindex_by_id() in mptcp/pm.c based on whether
mptcp_pm_is_userspace() or not.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch unifies the three PM get_local_id() interfaces:
mptcp_pm_nl_get_local_id() in mptcp/pm_netlink.c for the in-kernel PM and
mptcp_userspace_pm_get_local_id() in mptcp/pm_userspace.c for the
userspace PM.
They'll be switched in the common PM infterface mptcp_pm_get_local_id()
in mptcp/pm.c based on whether mptcp_pm_is_userspace() or not.
Also put together the declarations of these three functions in protocol.h.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename local_address() with "mptcp_" prefix and export it in protocol.h.
This function will be re-used in the common PM code (pm.c) in the
following commit.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
selftests: mptcp: skip tests not supported by old kernels (part 2)
After a few years of increasing test coverage in the MPTCP selftests, we
realised [1] the last version of the selftests is supposed to run on old
kernels without issues.
Supporting older versions is not that easy for this MPTCP case: these
selftests are often validating the internals by checking packets that
are exchanged, when some MIB counters are incremented after some
actions, how connections are getting opened and closed in some cases,
etc. In other words, it is not limited to the socket interface between
the userspace and the kernelspace.
In addition to that, the current MPTCP selftests run a lot of different
sub-tests but the TAP13 protocol used in the selftests don't support
sub-tests: one failure in sub-tests implies that the whole selftest is
seen as failed at the end because sub-tests are not tracked. It is then
important to skip sub-tests not supported by old kernels.
To minimise the modifications and reduce the complexity to support old
versions, the idea is to look at external signs and skip the whole
selftests or just some sub-tests before starting them. This cannot be
applied in all cases.
This second part focuses on marking different sub-tests as skipped if
some MPTCP features are not supported. A few techniques are used here:
- Before starting some tests:
- Check if a file (sysctl knob) is present: that's what patch 13/14 is
doing for the userspace PM feature.
- Check if a symbol is present in /proc/kallsyms: patch 1/14 adds some
helpers in mptcp_lib.sh to ease its use. Then these helpers are used
in patches 2, 3, 4, 10, 11 and 14/14.
- Set a flag and get the status to check if a feature is supported:
patch 8/14 is doing that with the 'fullmesh' flag.
- After having launched the tests:
- Retrieve the counters after a test and check if they are different
than 0. Similar to the check with the flag, that's not ideal but in
this case, the counters were already present before the introduction
of MPTCP but they have been supported by MPTCP sockets only later.
Patches 5 and 6/14 are using this technique.
Before skipping tests, SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var
value is checked: if it is set to 1, the test is marked as "failed"
instead of "skipped". MPTCP public CI expects to have all features
supported and it sets this env var to 1 to catch regressions in these
new checks.
Patches 7/14 and 9/14 are a bit different because they don't skip tests:
- Patch 7/14 retrieves the default values instead of using hardcoded
ones because these default values have been modified at some points.
Then the comparisons are done with the default values.
- patch 9/14 relaxes the expected returned size from MPTCP's getsockopt
because the different structures gathering various info can get new
fields and get bigger over time. We cannot expect that the userspace
is using the same structure as the kernel.
Patch 12/14 marks the test as "skipped" instead of "failed" if the "ip"
tool is not available.
In this second part, the "mptcp_join" selftest is not modified yet. This
will come soon after in the third part with quite a few patches.
Link: https://lore.kernel.org/stable/CA+G9fYtDGpgT4dckXD-y-N92nqUxuvue_7AtDdBcHrbOMsDZLg@mail.gmail.com/ [1]
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
====================
Link: https://lore.kernel.org/r/20230608-upstream-net-20230608-mptcp-selftests-support-old-kernels-part-2-v1-0-20997a6fd841@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the new listener events linked to the path-manager
introduced by commit f8c9dfbd875b ("mptcp: add pm listener events").
It is possible to look for "mptcp_event_pm_listener" in kallsyms to know
in advance if the kernel supports this feature and skip these sub-tests
if the feature is not supported.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 6c73008aa301 ("selftests: mptcp: listener test for userspace PM")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the MPTCP Userspace PM introduced by commit 4638de5aefe5
("mptcp: handle local addrs announced by userspace PMs").
We can skip all these tests if the feature is not supported simply by
looking for the MPTCP pm_type's sysctl knob.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 259a834fadda ("selftests: mptcp: functional tests for the userspace PM type")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a required tool is missing, the return code 4 (SKIP) should be
returned instead of 1 (FAIL).
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 259a834fadda ("selftests: mptcp: functional tests for the userspace PM type")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is TCP_INQ cmsg support introduced in commit 2c9e77659a0c
("mptcp: add TCP_INQ cmsg support").
It is possible to look for "mptcp_ioctl" in kallsyms because it was
needed to introduce the mentioned feature. We can skip these tests and
not set TCPINQ option if the feature is not supported.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 5cbd886ce2a9 ("selftests: mptcp: add TCP_INQ support")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the getsockopt(SOL_MPTCP) to get info about the MPTCP
connections introduced by commit 55c42fa7fa33 ("mptcp: add MPTCP_INFO
getsockopt") and the following ones.
It is possible to look for "mptcp_diag_fill_info" in kallsyms because
it is introduced by the mentioned feature. So we can know in advance if
the feature is supported and skip the sub-test if not.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: ce9979129a0b ("selftests: mptcp: add mptcp getsockopt test cases")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the getsockopt(SOL_MPTCP) to get info about the MPTCP
connections introduced by commit 55c42fa7fa33 ("mptcp: add MPTCP_INFO
getsockopt") and the following ones.
We cannot guess in advance which sizes the kernel will returned: older
kernel can returned smaller sizes, e.g. recently the tcp_info structure
has been modified in commit 71fc704768f6 ("tcp: add rcv_wnd and
plb_rehash to TCP_INFO") where a new field has been added.
The userspace can also expect a smaller size if it is compiled with old
uAPI kernel headers.
So for these sizes, we can only check if they are above a certain
threshold, 0 for the moment. We can also only compared sizes with the
ones set by the kernel.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: ce9979129a0b ("selftests: mptcp: add mptcp getsockopt test cases")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the fullmesh flag that can be given to the MPTCP
in-kernel path-manager and introduced in commit 2843ff6f36db ("mptcp:
remote addresses fullmesh").
If the flag is not visible in the dump after having set it, we don't
check the content. Note that if we expect to have this feature and
SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, we always
check the content to avoid regressions.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 6da1dfdd037e ("selftests: mptcp: add set_flags tests in pm_netlink.sh")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the checks of the default limits returned by the MPTCP
in-kernel path-manager. The default values have been modified by commit
72bcbc46a5c3 ("mptcp: increase default max additional subflows to 2").
Instead of comparing with hardcoded values, we can get the default one
and compare with them.
Note that if we expect to have the latest version, we continue to check
the hardcoded values to avoid unexpected behaviour changes.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: eedbc685321b ("selftests: add PM netlink functional tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the reporting of the MPTCP sockets being used, introduced
by commit c558246ee73e ("mptcp: add statistics for mptcp socket in use").
Similar to the parent commit, it looks like there is no good pre-check
to do here, i.e. dedicated function available in kallsyms. Instead, we
try to get info and if nothing is returned, the test is marked as
skipped.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: e04a30f78809 ("selftest: mptcp: add test for mptcp socket in use")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the listen diag dump support introduced by
commit 4fa39b701ce9 ("mptcp: listen diag dump support").
It looks like there is no good pre-check to do here, i.e. dedicated
function available in kallsyms. Instead, we try to get info if nothing
is returned, the test is marked as skipped.
That's not ideal because something could be wrong with the feature and
instead of reporting an error, the test could be marked as skipped. If
we know in advanced that the feature is supposed to be supported, the
tester can set SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var to 1: in
this case the test will report an error instead of marking the test as
skipped if nothing is returned.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: f2ae0fa68e28 ("selftests/mptcp: add diag listen tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of TCP_FASTOPEN socket option with MPTCP
connections introduced by commit 4ffb0a02346c ("mptcp: add TCP_FASTOPEN
sock option").
It is possible to look for "mptcp_fastopen_" in kallsyms to know if the
feature is supported or not.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: ca7ae8916043 ("selftests: mptcp: mptfo Initiator/Listener")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the full support of disconnections from the userspace
introduced by commit b29fcfb54cd7 ("mptcp: full disconnect
implementation").
It is possible to look for "mptcp_pm_data_reset" in kallsyms because a
preparation patch added it to ease the introduction of the mentioned
feature.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 05be5e273c84 ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of IP(V6)_TRANSPARENT socket option with
MPTCP connections introduced by commit c9406a23c116 ("mptcp: sockopt:
add SOL_IP freebind & transparent options").
It is possible to look for "__ip_sock_set_tos" in kallsyms because
IP(V6)_TRANSPARENT socket option support has been added after TOS
support which came with the required infrastructure in MPTCP sockopt
code. To support TOS, the following function has been exported (T). Not
great but better than checking for a specific kernel version.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 5fb62e9cd3ad ("selftests: mptcp: add tproxy test case")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
New functions are now available to easily detect if a certain feature is
missing by looking at kallsyms.
These new helpers are going to be used in the following commits. In
order to ease the backport of such future patches, it would be good if
this patch is backported up to the introduction of MPTCP selftests,
hence the Fixes tag below: this type of check was supposed to be done
from the beginning.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.5
The second pull request for v6.5. We have support for three new
Realtek chipsets, all from different generations. Shows how active
Realtek development is right now, even older generations are being
worked on.
Note: We merged wireless into wireless-next to avoid complex conflicts
between the trees.
Major changes:
rtl8xxxu
- RTL8192FU support
rtw89
- RTL8851BE support
rtw88
- RTL8723DS support
ath11k
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced MBSSID
Advertisement (EMA) support in AP mode
iwlwifi
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
cfg80211/mac80211
- more Multi-Link Operation (MLO) support such as hardware restart
- fixes for a potential work/mutex deadlock and with it beginnings of
the previously discussed locking simplifications
* tag 'wireless-next-2023-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (162 commits)
wifi: rtlwifi: remove misused flag from HAL data
wifi: rtlwifi: remove unused dualmac control leftovers
wifi: rtlwifi: remove unused timer and related code
wifi: rsi: Do not set MMC_PM_KEEP_POWER in shutdown
wifi: rsi: Do not configure WoWlan in shutdown hook if not enabled
wifi: brcmfmac: Detect corner error case earlier with log
wifi: rtw89: 8852c: update RF radio A/B parameters to R63
wifi: rtw89: 8852c: update TX power tables to R63 with 6 GHz power type (3 of 3)
wifi: rtw89: 8852c: update TX power tables to R63 with 6 GHz power type (2 of 3)
wifi: rtw89: 8852c: update TX power tables to R63 with 6 GHz power type (1 of 3)
wifi: rtw89: process regulatory for 6 GHz power type
wifi: rtw89: regd: update regulatory map to R64-R40
wifi: rtw89: regd: judge 6 GHz according to chip and BIOS
wifi: rtw89: refine clearing supported bands to check 2/5 GHz first
wifi: rtw89: 8851b: configure CRASH_TRIGGER feature for 8851B
wifi: rtw89: set TX power without precondition during setting channel
wifi: rtw89: debug: txpwr table access only valid page according to chip
wifi: rtw89: 8851b: enable hw_scan support
wifi: cfg80211: move scan done work to wiphy work
wifi: cfg80211: move sched scan stop to wiphy work
...
====================
Link: https://lore.kernel.org/r/87bkhohkbg.fsf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'handle' is known to be NULL here. There is no need to kfree() it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In case user wants to configure the SFs, for example: to use only vdpa
functionality, he needs to fully probe a SF, configure what he wants,
and afterward reload the SF.
In order to save the time of the reload, local SFs will probe without
any auxiliary sub-device, so that the SFs can be configured prior to
its full probe.
The defaults of the enable_* devlink params of these SFs are set to
false.
Usage example:
Create SF:
$ devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 11
$ devlink port function set pci/0000:08:00.0/32768 \
hw_addr 00:00:00:00:00:11 state active
Enable ETH auxiliary device:
$ devlink dev param set auxiliary/mlx5_core.sf.1 \
name enable_eth value true cmode driverinit
Now, in order to fully probe the SF, use devlink reload:
$ devlink dev reload auxiliary/mlx5_core.sf.1
At this point the user have SF devlink instance with auxiliary device
for the Ethernet functionality only.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Move the param registration and handling code into the eswitch
code as they are related to each other. No point in having the
devlink param registration done in separate file.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
mlx5_cmd_init_hca() is taking ~0.2 seconds. In case of a user who
desire to disable some of the SF aux devices, and with large scale-1K
SFs for example, this user will waste more than 3 minutes on
mlx5_cmd_init_hca() which isn't needed at this stage.
Downstream patch will change SFs which are probe over the E-switch,
local SFs, to be probed without any aux dev. In order to support this,
split function_setup() to avoid executing mlx5_cmd_init_hca().
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
