| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
HDCP 1.x capability needs to be checked even if setup is not
HDCP 2.x capable.
--v2
-Assign hdcp_capable and hdcp2_capable to false [Chaitanya]
--v3
-Fix variable assignment [Chaitanya]
Fixes: 813cca96e4ac ("drm/i915/hdcp: Add new remote capability check shim function")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240401055652.276785-2-suraj.kandpal@intel.com
(cherry picked from commit 6809f9246d43f7cb07310ca6a3deb7aa1c0ea938)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently we only consider the relationship of the
old and new CDCLK frequencies when determining whether
to do the repgramming from intel_set_cdclk_pre_plane_update()
or intel_set_cdclk_post_plane_update().
It is technically possible to have a situation where the
CDCLK frequency is decreasing, but the voltage_level is
increasing due a DDI port. In this case we should bump
the voltage level already in intel_set_cdclk_pre_plane_update()
(so that the voltage_level will have been increased by the
time the port gets enabled), while leaving the CDCLK frequency
unchanged (as active planes/etc. may still depend on it).
We can then reduce the CDCLK frequency to its final value
from intel_set_cdclk_post_plane_update().
In order to handle that correctly we shall construct a
suitable amalgam of the old and new cdclk states in
intel_set_cdclk_pre_plane_update().
And we can simply call intel_set_cdclk() unconditionally
in both places as it will not do anything if nothing actually
changes vs. the current hw state.
v2: Handle cdclk_state->disable_pipes
v3: Only synchronize the cd2x update against the pipe's vblank
when the cdclk frequency is changing during the current
commit phase (Gustavo)
Cc: stable@vger.kernel.org
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-3-ville.syrjala@linux.intel.com
(cherry picked from commit 34d127e2bdef73a923aa0dcd95cbc3257ad5af52)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently we always reprogram CDCLK from the
intel_set_cdclk_pre_plane_update() when using squash/crawl.
The code only works correctly for the cd2x update or full
modeset cases, and it was simply never updated to deal with
squash/crawl.
If the CDCLK frequency is increasing we must reprogram it
before we do anything else that might depend on the new
higher frequency, and conversely we must not decrease
the frequency until everything that might still depend
on the old higher frequency has been dealt with.
Since cdclk_state->pipe is only relevant when doing a cd2x
update we can't use it to determine the correct sequence
during squash/crawl. To that end introduce cdclk_state->disable_pipes
which simply indicates that we must perform the update
while the pipes are disable (ie. during
intel_set_cdclk_pre_plane_update()). Otherwise we use the
same old vs. new CDCLK frequency comparsiong as for cd2x
updates.
The only remaining problem case is when the voltage_level
needs to increase due to a DDI port, but the CDCLK frequency
is decreasing (and not all pipes are being disabled). The
current approach will not bump the voltage level up until
after the port has already been enabled, which is too late.
But we'll take care of that case separately.
v2: Don't break the "must disable pipes case"
v3: Keep the on stack 'pipe' for future use
Cc: stable@vger.kernel.org
Fixes: d62686ba3b54 ("drm/i915/adl_p: CDCLK crawl support for ADL")
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-2-ville.syrjala@linux.intel.com
(cherry picked from commit 3aecee90ac12a351905f12dda7643d5b0676d6ca)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
W=1 warns about null argument to kprintf:
warning: ‘%s’ directive argument is null [-Wformat-overflow=]
pr_info("product: %s year: %d\n", product, year);
Use "unknown" instead of NULL.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/33d40e976f08f82b9227d0ecae38c787fcc0c0b2.1712154684.git.soyer@irl.hu
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
ACER Vivobook Flip (TP401NAS) virtual intel switch is implemented as
follow:
Device (VGBI)
{
Name (_HID, EisaId ("INT33D6") ...
Name (VBDS, Zero)
Method (_STA, 0, Serialized) // _STA: Status ...
Method (VBDL, 0, Serialized)
{
PB1E |= 0x20
VBDS |= 0x40
}
Method (VGBS, 0, Serialized)
{
Return (VBDS) /* \_SB_.PCI0.SBRG.EC0_.VGBI.VBDS */
}
...
}
By default VBDS is set to 0. At boot it is set to clamshell (bit 6 set)
only after method VBDL is executed.
Since VBDL is now evaluated in the probe routine later, after the device
is registered, the retrieved value of VBDS was still 0 ("tablet mode")
when setting up the virtual switch.
Make sure to evaluate VGBS after VBDL, to ensure the
convertible boots in clamshell mode, the expected default.
Fixes: 26173179fae1 ("platform/x86: intel-vbtn: Eval VBDL after registering our notifier")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240329143206.2977734-3-gwendal@chromium.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The check for a device having virtual buttons is done using
acpi_has_method(..."VBDL"). Mimic that for checking virtual switch
presence.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240329143206.2977734-2-gwendal@chromium.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Stop logging unknown event / unknown keycode messages on suspend /
resume on a Toshiba Portege Z830:
1. The Toshiba Portege Z830 sends a 0x8e event when the power button
is pressed, ignore this.
2. The Toshiba Portege Z830 sends a 0xe00 hotkey event on resume from
suspend, ignore this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240402124351.167152-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Jonathan noted that when the coordinates for host bridge and switches
can be 0s if no actual data are retrieved and the calculation continues.
The resulting number would be inaccurate. Add checks to ensure that the
calculation would complete only if the numbers are valid.
While not seen in the wild, issue may show up with a BIOS that reported
CXL root ports via Generic Ports (via a PCI handle in the SRAT entry).
Fixes: 14a6960b3e92 ("cxl: Add helper function that calculate performance data for downstream ports")
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20240403154844.3403859-6-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
The driver stores access_coordinate for host bridge in ->hb_coord and
switch CDAT access_coordinate in ->sw_coord. Since neither of these
access_coordinate clobber each other, the variable name can be consolidated
into ->coord to simplify the code.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20240403154844.3403859-5-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Current math in cxl_region_perf_data_calculate divides the latency by 1000
every time the function gets called. This causes the region latency to be
divided by 1000 per memory device and the math is incorrect. This is user
visible as the latency access_coordinate exposed via sysfs will show
incorrect latency data.
Normalize values from CDAT to nanoseconds. Adjust sub-nanoseconds latency
to at least 1. Remove adjustment of perf numbers from the generic target
since hmat handling code has already normalized those numbers. Now all
computation and stored numbers should be in nanoseconds.
cxl_hb_get_perf_coordinates() is removed and HB coords are calculated
in the port access_coordinate calculation path since it no longer need
to be treated special.
Fixes: 3d9f4a197230 ("cxl/region: Calculate performance data for a region")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20240403154844.3403859-4-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Current loop in cxl_endpoint_get_perf_coordinates() incorrectly assumes
the Root Port (RP) dport is the one with generic port access_coordinate.
However those coordinates are one level up in the Host Bridge (HB).
Current code causes the computation code to pick up 0s as the coordinates
and cause minimal bandwidth to result in 0.
Add check to skip RP when combining coordinates.
Fixes: 14a6960b3e92 ("cxl: Add helper function that calculate performance data for downstream ports")
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20240403154844.3403859-3-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Add INTC107B for Lunar Lake and INTC10CB for Arrow Lake ACPI devices IDs.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Link: https://lore.kernel.org/r/20240405122630.32154-1-sumeet.r.pawnikar@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
If, for example, the power button is configured to suspend, holding it
and releasing it after the machine has suspended, will wake the machine.
Also on some machines, power button release events are sent during
hibernation, even if the button wasn't used to hibernate the machine.
This causes hibernation to be aborted.
Fixes: 0c4cae1bc00d ("PM: hibernate: Avoid missing wakeup events during hibernation")
Signed-off-by: David McFarland <corngood@gmail.com>
Tested-by: Enrik Berkhan <Enrik.Berkhan@inka.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/878r1tpd6u.fsf_-_@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The modes[] array contains pointers to modes on the connectors'
mode lists, which are protected by dev->mode_config.mutex.
Thus we need to extend modes[] the same protection or by the
time we use it the elements may already be pointing to
freed/reused memory.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10583
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404203336.10454-2-ville.syrjala@linux.intel.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Commit b2b32a173881 ("ACPI: bus: update acpi_dev_hid_uid_match() to
support multiple types") added _UID matching support for both integer
and string types, which satisfies NULL @uid2 argument for string types
using inversion, but this logic prevents _UID comparision in case the
argument is integer 0, which may result in false positives.
Fix this using _Generic(), which will allow NULL @uid2 argument for
string types as well as _UID matching for all possible integer values.
Fixes: b2b32a173881 ("ACPI: bus: update acpi_dev_hid_uid_match() to support multiple types")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
[ rjw: Comment adjustment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The host1x devices are virtual compound devices and do not perform DMA
accesses themselves, so they do not need to be set up for DMA.
Ideally we would also not need to set up DMA masks for the virtual
devices, but we currently still need those for legacy support on old
hardware.
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240314154943.2487549-1-thierry.reding@gmail.com
|
|
On the Toshiba Encore WT10-A tablet the BATC battery ACPI device depends
on 3 other devices:
Name (_DEP, Package (0x03) // _DEP: Dependencies
{
I2C1,
GPO2,
GPO0
})
acpi_scan_check_dep() adds all 3 of these to the acpi_dep_list and then
before an acpi_device is created for the BATC handle (and thus before
acpi_scan_dep_init() runs) acpi_scan_clear_dep() gets called for both
GPIO depenencies, with free_when_met not set for the dependencies.
Since there is no adev for BATC yet, there also is no dep_unmet to
decrement. The only result of acpi_scan_clear_dep() in this case is
dep->met getting set.
Soon after acpi_scan_clear_dep() has been called for the GPIO dependencies
the acpi_device gets created for the BATC handle and acpi_scan_dep_init()
runs, this sees 3 dependencies on the acpi_dep_list and initializes
unmet_dep to 3. Later when the dependency for I2C1 is met unmet_dep
becomes 2, but since the 2 GPIO deps where already met it never becomes 0
causing battery monitoring to not work.
Fix this by modifying acpi_scan_dep_init() to not increase dep_met for
dependencies which have already been marked as being met.
Fixes: 3ba12d8de3fa ("ACPI: scan: Reduce overhead related to devices with dependencies")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: 6.5+ <stable@vger.kernel.org> # 6.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Minda Chen says:
====================
Add missing mmc statistics in DW GMAC
Add miss MMC statistic in DW GMAC
base on 6.9-rc1
changed
v2:
patch2 : remove mmc_rx_control_g due to it is gotten in
ethtool_ops::get_eth_ctrl_stats.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The missing statistics including Rx_Receive_Error_Packets and
Tx_OSize_Packets_Good.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
XGMAC MMC has already added LPI statistics. GMAC MMC lack of these
statistics. Add register definition and reading the LPI statistics
from registers.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
s2idle works like a regular suspend with freezing processes and freezing
devices. All CPUs except the control CPU go into idle. Once this is
completed the control CPU kicks all other CPUs out of idle, so that they
reenter the idle loop and then enter s2idle state. The control CPU then
issues an swait() on the suspend state and therefore enters the idle loop
as well.
Due to being kicked out of idle, the other CPUs leave their NOHZ states,
which means the tick is active and the corresponding hrtimer is programmed
to the next jiffie.
On entering s2idle the CPUs shut down their local clockevent device to
prevent wakeups. The last CPU which enters s2idle shuts down its local
clockevent and freezes timekeeping.
On resume, one of the CPUs receives the wakeup interrupt, unfreezes
timekeeping and its local clockevent and starts the resume process. At that
point all other CPUs are still in s2idle with their clockevents switched
off. They only resume when they are kicked by another CPU or after resuming
devices and then receiving a device interrupt.
That means there is no guarantee that all CPUs will wakeup directly on
resume. As a consequence there is no guarantee that timers which are queued
on those CPUs and should expire directly after resume, are handled. Also
timer list timers which are remotely queued to one of those CPUs after
resume will not result in a reprogramming IPI as the tick is
active. Queueing a hrtimer will also not result in a reprogramming IPI
because the first hrtimer event is already in the past.
The recent introduction of the timer pull model (7ee988770326 ("timers:
Implement the hierarchical pull model")) amplifies this problem, if the
current migrator is one of the non woken up CPUs. When a non pinned timer
list timer is queued and the queuing CPU goes idle, it relies on the still
suspended migrator CPU to expire the timer which will happen by chance.
The problem exists since commit 8d89835b0467 ("PM: suspend: Do not pause
cpuidle in the suspend-to-idle path"). There the cpuidle_pause() call which
in turn invoked a wakeup for all idle CPUs was moved to a later point in
the resume process. This might not be reached or reached very late because
it waits on a timer of a still suspended CPU.
Address this by kicking all CPUs out of idle after the control CPU returns
from swait() so that they resume their timers and restore consistent system
state.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218641
Fixes: 8d89835b0467 ("PM: suspend: Do not pause cpuidle in the suspend-to-idle path")
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: 5.16+ <stable@kernel.org> # 5.16+
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Michael Chan says:
====================
bnxt_en: Bug fixes
The first 2 patches fix 2 potential issues in the aux bus initialization
and error recovery paths. The 3rd patch fixes a potential PTP TX
timestamp issue during error recovery.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is possible that during error recovery and firmware reset,
there is a pending TX PTP packet waiting for the timestamp.
We need to reset this condition so that after recovery, the
tx_avail count for PTP is reset back to the initial value.
Otherwise, we may not accept any PTP TX timestamps after
recovery.
Fixes: 118612d519d8 ("bnxt_en: Add PTP clock APIs, ioctls, and ethtool methods")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since runtime MSIXs vector allocation/free has been removed,
the L2 driver needs to repopulate the MSIX entries for the
ulp client as the irq table may change during the recovery
process.
Fixes: 303432211324 ("bnxt_en: Remove runtime interrupt vector allocation")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If ulp = kzalloc() fails, the allocated edev will leak because it is
not properly assigned and the cleanup path will not be able to free it.
Fix it by assigning it properly immediately after allocation.
Fixes: 303432211324 ("bnxt_en: Remove runtime interrupt vector allocation")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add Acer Predator PH18-71 to acer_quirks with predator_v4
to support mode button and fan speed sensor.
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240329152800.29393-1-bero@baylibre.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Since [1], dma_alloc_coherent() does not accept requests for GFP_COMP
anymore, even on archs that may be able to fulfill this. Functionality that
relied on the receive buffer being a compound page broke at that point:
The SMC-D protocol, that utilizes the ism device driver, passes receive
buffers to the splice processor in a struct splice_pipe_desc with a
single entry list of struct pages. As the buffer is no longer a compound
page, the splice processor now rejects requests to handle more than a
page worth of data.
Replace dma_alloc_coherent() and allocate a buffer with folio_alloc and
create a DMA map for it with dma_map_page(). Since only receive buffers
on ISM devices use DMA, qualify the mapping as FROM_DEVICE.
Since ISM devices are available on arch s390, only and on that arch all
DMA is coherent, there is no need to introduce and export some kind of
dma_sync_to_cpu() method to be called by the SMC-D protocol layer.
Analogously, replace dma_free_coherent by a two step dma_unmap_page,
then folio_put to free the receive buffer.
[1] https://lore.kernel.org/all/20221113163535.884299-1-hch@lst.de/
Fixes: c08004eede4b ("s390/ism: don't pass bogus GFP_ flags to dma_alloc_coherent")
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot is able to trigger an uninit-value in geneve_xmit() [1]
Problem : While most ip tunnel helpers (like ip_tunnel_get_dsfield())
uses skb_protocol(skb, true), pskb_inet_may_pull() is only using
skb->protocol.
If anything else than ETH_P_IPV6 or ETH_P_IP is found in skb->protocol,
pskb_inet_may_pull() does nothing at all.
If a vlan tag was provided by the caller (af_packet in the syzbot case),
the network header might not point to the correct location, and skb
linear part could be smaller than expected.
Add skb_vlan_inet_prepare() to perform a complete mac validation.
Use this in geneve for the moment, I suspect we need to adopt this
more broadly.
v4 - Jakub reported v3 broke l2_tos_ttl_inherit.sh selftest
- Only call __vlan_get_protocol() for vlan types.
Link: https://lore.kernel.org/netdev/20240404100035.3270a7d5@kernel.org/
v2,v3 - Addressed Sabrina comments on v1 and v2
Link: https://lore.kernel.org/netdev/Zg1l9L2BNoZWZDZG@hog/
[1]
BUG: KMSAN: uninit-value in geneve_xmit_skb drivers/net/geneve.c:910 [inline]
BUG: KMSAN: uninit-value in geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030
geneve_xmit_skb drivers/net/geneve.c:910 [inline]
geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030
__netdev_start_xmit include/linux/netdevice.h:4903 [inline]
netdev_start_xmit include/linux/netdevice.h:4917 [inline]
xmit_one net/core/dev.c:3531 [inline]
dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547
__dev_queue_xmit+0x348d/0x52c0 net/core/dev.c:4335
dev_queue_xmit include/linux/netdevice.h:3091 [inline]
packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3081 [inline]
packet_sendmsg+0x8bb0/0x9ef0 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:745
__sys_sendto+0x685/0x830 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1d0 net/socket.c:2199
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3804 [inline]
slab_alloc_node mm/slub.c:3845 [inline]
kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577
__alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668
alloc_skb include/linux/skbuff.h:1318 [inline]
alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504
sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795
packet_alloc_skb net/packet/af_packet.c:2930 [inline]
packet_snd net/packet/af_packet.c:3024 [inline]
packet_sendmsg+0x722d/0x9ef0 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:745
__sys_sendto+0x685/0x830 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1d0 net/socket.c:2199
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
CPU: 0 PID: 5033 Comm: syz-executor346 Not tainted 6.9.0-rc1-syzkaller-00005-g928a87efa423 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
Fixes: d13f048dd40e ("net: geneve: modify IP header check in geneve6_xmit_skb and geneve_xmit_skb")
Reported-by: syzbot+9ee20ec1de7b3168db09@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/000000000000d19c3a06152f9ee4@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When sending a patch to (among others) Li Yang the nxp MTA replied that
the address doesn't exist and so the mail couldn't be delivered. The
error code was 550, so at least technically that's not a temporal issue.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- void infinite loop trying to resize local TT, by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When CONFIG_NET is disabled, an extra warning shows up for this
unused variable:
lib/checksum_kunit.c:218:18: error: 'expected_csum_ipv6_magic' defined but not used [-Werror=unused-const-variable=]
Replace the #ifdef with an IS_ENABLED() check that makes the compiler's
dead-code-elimination take care of the link failure.
Fixes: f24a70106dc1 ("lib: checksum: Fix build with CONFIG_NET=n")
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ivpu_device->context_xa is locked both in kernel thread and IRQ context.
It requires XA_FLAGS_LOCK_IRQ flag to be passed during initialization
otherwise the lock could be acquired from a thread and interrupted by
an IRQ that locks it for the second time causing the deadlock.
This deadlock was reported by lockdep and observed in internal tests.
Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Cc: <stable@vger.kernel.org> # v6.3+
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-9-jacek.lawrynowicz@linux.intel.com
|
|
Change "VPU" to "NPU" in ivpu_suspend() so it matches all other error
messages.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-8-jacek.lawrynowicz@linux.intel.com
|
|
DRM_IVPU_PARAM_CORE_CLOCK_RATE returns current NPU frequency which
could be 0 if device was sleeping. This value isn't really useful to
the user space, so return max freq instead which can be used to estimate
NPU performance.
Fixes: c39dc15191c4 ("accel/ivpu: Read clock rate only if device is up")
Cc: <stable@vger.kernel.org> # v6.7
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-7-jacek.lawrynowicz@linux.intel.com
|
|
This patch improves readability and clarity of MMU error messages.
Previously, the error strings were somewhat confusing and could lead to
ambiguous interpretations, making it difficult to diagnose issues.
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-6-jacek.lawrynowicz@linux.intel.com
|
|
Put NPU in D3hot after ivpu_resume() fails to power up the device.
This will assure that D3->D0 power cycle will be performed before
the next resume and also will minimize power usage in this corner case.
Fixes: 28083ff18d3f ("accel/ivpu: Fix DevTLB errors on suspend/resume and recovery")
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-5-jacek.lawrynowicz@linux.intel.com
|
|
In case of failed power up we end up left in PCI D3hot
state making it impossible to access NPU registers on retry.
Enter D0 state on retry before proceeding with power up sequence.
Fixes: 28083ff18d3f ("accel/ivpu: Fix DevTLB errors on suspend/resume and recovery")
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-4-jacek.lawrynowicz@linux.intel.com
|
|
Always enter D3hot after entering D0i3 an all platforms.
This minimizes power usage.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-3-jacek.lawrynowicz@linux.intel.com
|
|
Return value of drmm_mutex_init(ipc->lock) was unchecked.
Fixes: 5d7422cfb498 ("accel/ivpu: Add IPC driver and JSM messages")
Cc: <stable@vger.kernel.org> # v6.3+
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-2-jacek.lawrynowicz@linux.intel.com
|
|
When one stacking device is over one device with virt_boundary_mask and
another one with max segment size, the stacking device have both limits
set. This way is allowed before d690cb8ae14b ("block: add an API to
atomically update queue limits").
Relax the limit so that we won't break such kind of stacking setting.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218687
Reported-by: janpieter.sollie@edpnet.be
Fixes: d690cb8ae14b ("block: add an API to atomically update queue limits")
Link: https://lore.kernel.org/linux-block/ZfGl8HzUpiOxCLm3@fedora/
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: dm-devel@lists.linux.dev
Cc: Song Liu <song@kernel.org>
Cc: linux-raid@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20240407131931.4055231-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Multiple gendisk instances can allocated/added for single request queue
in case of disk rebind. blkg may still stay in q->blkg_list when calling
blkcg_init_disk() for rebind, then q->blkg_list becomes corrupted.
Fix the list corruption issue by:
- add blkg_init_queue() to initialize q->blkg_list & q->blkcg_mutex only
- move calling blkg_init_queue() into blk_alloc_queue()
The list corruption should be started since commit f1c006f1c685 ("blk-cgroup:
synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()")
which delays removing blkg from q->blkg_list into blkg_free_workfn().
Fixes: f1c006f1c685 ("blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()")
Fixes: 1059699f87eb ("block: move blkcg initialization/destroy into disk allocation/release handler")
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240407125910.4053377-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bch2_acl_from_disk() uses allocate_dropping_locks, and can thus return
a transaction restart - this wasn't handled.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
|
|
When allocating bkey_cached from bc->freed_pcpu list, it missed
decreasing the count of nr_freed_pcpu which would cause the mismatch
between the value of nr_freed_pcpu and the list items. This problem
also exists in moving new bkey_cached to bc->freed_pcpu list.
If these happened, the bug info may appear in
bch2_fs_btree_key_cache_exit by the follow code:
BUG_ON(list_count_nodes(&bc->freed_pcpu) != bc->nr_freed_pcpu);
BUG_ON(list_count_nodes(&bc->freed_nonpcpu) != bc->nr_freed_nonpcpu);
Fixes: c65c13f0eac6 ("bcachefs: Run btree key cache shrinker less aggressively")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix MCE timer reinit locking
- Fix/improve CoCo guest random entropy pool init
- Fix SEV-SNP late disable bugs
- Fix false positive objtool build warning
- Fix header dependency bug
- Fix resctrl CPU offlining bug
* tag 'x86-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/retpoline: Add NOENDBR annotation to the SRSO dummy return thunk
x86/mce: Make sure to grab mce_sysfs_mutex in set_bank()
x86/CPU/AMD: Track SNP host status with cc_platform_*()
x86/cc: Add cc_platform_set/_clear() helpers
x86/kvm/Kconfig: Have KVM_AMD_SEV select ARCH_HAS_CC_PLATFORM
x86/coco: Require seeding RNG with RDRAND on CoCo systems
x86/numa/32: Include missing <asm/pgtable_areas.h>
x86/resctrl: Fix uninitialized memory read when last CPU of domain goes offline
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Fix various timer bugs:
- Fix a timer migration bug that may result in missed events
- Fix timer migration group hierarchy event updates
- Fix a PowerPC64 build warning
- Fix a handful of DocBook annotation bugs"
* tag 'timers-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Return early on deactivation
timers/migration: Fix ignored event due to missing CPU update
vdso: Use CONFIG_PAGE_SHIFT in vdso/datapage.h
timers: Fix text inconsistencies and spelling
tick/sched: Fix struct tick_sched doc warnings
tick/sched: Fix various kernel-doc warnings
timers: Fix kernel-doc format and add Return values
time/timekeeping: Fix kernel-doc warnings and typos
time/timecounter: Fix inline documentation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Ingo Molnar:
"Fix a combined PEBS events bug on x86 Intel CPUs"
* tag 'perf-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/ds: Don't clear ->pebs_data_cfg for the last PEBS event
|
|
Inorder to support shaping and scheduling, Upon class creation
Netdev driver allocates trasmit schedulers.
The previous patch which added support for Round robin scheduling has
a bug due to which driver is not freeing transmit schedulers post
class deletion.
This patch fixes the same.
Fixes: 47a9656f168a ("octeontx2-pf: htb offload support for Round Robin scheduling")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a bug when setting the RSS options in virtio_net that can break
the whole machine, getting the kernel into an infinite loop.
Running the following command in any QEMU virtual machine with virtionet
will reproduce this problem:
# ethtool -X eth0 hfunc toeplitz
This is how the problem happens:
1) ethtool_set_rxfh() calls virtnet_set_rxfh()
2) virtnet_set_rxfh() calls virtnet_commit_rss_command()
3) virtnet_commit_rss_command() populates 4 entries for the rss
scatter-gather
4) Since the command above does not have a key, then the last
scatter-gatter entry will be zeroed, since rss_key_size == 0.
sg_buf_size = vi->rss_key_size;
5) This buffer is passed to qemu, but qemu is not happy with a buffer
with zero length, and do the following in virtqueue_map_desc() (QEMU
function):
if (!sz) {
virtio_error(vdev, "virtio: zero sized buffers are not allowed");
6) virtio_error() (also QEMU function) set the device as broken
vdev->broken = true;
7) Qemu bails out, and do not repond this crazy kernel.
8) The kernel is waiting for the response to come back (function
virtnet_send_command())
9) The kernel is waiting doing the following :
while (!virtqueue_get_buf(vi->cvq, &tmp) &&
!virtqueue_is_broken(vi->cvq))
cpu_relax();
10) None of the following functions above is true, thus, the kernel
loops here forever. Keeping in mind that virtqueue_is_broken() does
not look at the qemu `vdev->broken`, so, it never realizes that the
vitio is broken at QEMU side.
Fix it by not sending RSS commands if the feature is not available in
the device.
Fixes: c7114b1249fa ("drivers/net/virtio_net: Added basic RSS support.")
Cc: stable@vger.kernel.org
Cc: qemu-devel@nongnu.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Multiple bug fixes for journal iters:
- When the journal keys gap buffer is resized, we have to adjust the
iterators for moving the gap to the end
- We don't want to rewind iterators to point to the key we just
inserted if it's not for the correct btree/level
Also, add some new assertions.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
