| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Each stream needs a dma_config_tlv. We will handle multi dma_config_tlv
in the follow up commits.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
first CPU DAI"
This reverts commit f8ba62ac863c33fc0d8ac3f1270985c2b77f4377.
The SoundWire aggregated solution was to use one DMA on multiple links.
But, the solution changed to use one DMA for each link. It means that
we should assign HDaudio stream_tag for each cpu_dai.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This reverts commit 699e146d9ebf42ee2a5d4e4e28f7a49c4aef0105.
Don't reset device_count as we will use the multi-gateway firmware
configuration.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The existing code derives the channel map used to program the HDaudio
link DMA from the hw_params, but that is not quite right in the case
of aggregation. The code in soc-pcm.c splits the hw_params depending
on the codec_ch_map, and we need to reconstruct the channel-map to
insert the data in the right places.
This issue is seen only on amplifier feedback capture where the data
from the second amplifier was replaced by that of the first amplifier.
Note that the loop iterator of the macro for_each_rtd_cpu_dais() is
reused in a following loop. This is different to all existing usages
of that macro, hence the use of a boolean flag to avoid an access to
an uninitialized variable.
Fixes: 2960ee5c4814 ("ASoC: SOF: Intel: hda-dai: add helpers for SoundWire callbacks")
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Cppcheck reports this:
sound/soc/sof/ipc4-topology.c:569:23: style: Local variable 'sdev'
shadows outer variable [shadowVariable]
struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(scomp);
^
sound/soc/sof/ipc4-topology.c:512:22: note: Shadowed declaration
struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(scomp);
^
sound/soc/sof/ipc4-topology.c:569:23: note: Shadow variable
struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(scomp);
^
Remove shadowed variable.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240402145959.172619-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Somehow instance_id and id were mixed. Align on instance_id for
consistency.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240402145959.172619-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
cppcheck reports this issue:
sound/soc/sof/amd/acp-loader.c:299:6: style: Variable 'ret' is
reassigned a value before the old one has been
used. [redundantAssignment]
ret = request_firmware(&adata->fw_dbin, fw_filename, sdev->dev);
^
sound/soc/sof/amd/acp-loader.c:289:6: note: ret is assigned
ret = snd_sof_dsp_block_write(sdev, SOF_FW_BLK_TYPE_IRAM, 0,
^
sound/soc/sof/amd/acp-loader.c:299:6: note: ret is overwritten
ret = request_firmware(&adata->fw_dbin, fw_filename, sdev->dev);
^
This behavior is probably unintentional, there's no reason to return
an error for the DRAM but not the IRAM.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240402145959.172619-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To check loaded FW version:
$ hexdump -C /sys/kernel/debug/sof/fw_version
00000000 02 00 07 00 63 00 01 00 00 00 00 00 00 00 00 00 |....c...........|
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402145959.172619-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch is modified nau8325_dac_oversampl_enum enumerated.
Use SOC_VALUE_ENUM instead to hide empty (presumably invalid) options.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Link: https://msgid.link/r/20240401104753.3432507-1-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
R-Car Gen1 and Gen4 doesn't have SCU, and current driver checks Gen1
(only) on each devices (A). But these drivers are assuming it might be
not enabled after that (B).
/* This driver doesn't support Gen1 at this point */
(A) if (rsnd_is_gen1(priv))
return 0;
(B) node = rsnd_src_of_node(priv);
if (!node)
return 0; /* not used is not error */
Gen4 DT doesn't have these device settings. (A) check doesn't work for
it, but (B) check handling it.
Gen1 DT doesn't have these device settings either, and (A) is handling
it, but (B) only is very enough. (A) is no longer needed.
This patch removes (A)
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87v850a4dl.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Renesas Sound driver is using rsnd_is_genX() macro to handling
difference. We can use "grep rsnd_is_gen" to find-out difference for
each SoC today.
In general, driver uses flag to handling SoC difference. But in Renesas
Sound case, the differences are very specific, if you try to make it
general, the code will become be very complicated.
Some of them can use flag to handling, but we can find-out all diffence
by using "grep rsnd_is_gen" today. It is not so good, but not so bad so
far. So we will keep current style for a while.
This patch cares Gen1/Gen2 exception by using negative handling to makes no
more update for this part when we support Gen5 or later.
- if (rsnd_is_gen3() || rsnd_is_gen4() || rsnd_is_gen5() || ...)
+ if (!rsnd_is_gen1() && !rsnd_is_gen2())
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87wmpga4ds.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Renesas Sound driver is using rsnd_is_genX() macro to handling
difference. We can use "grep rsnd_is_gen" to find-out difference for
each SoC except rsnd_is_e3(). Let's put same rule for E3 as well.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87y19wa4dy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
All SoC has reg-name, no need to support getting resource from ID
any more. Remove it. To get physical address for DMA settings,
it still need to know the index, but it is no longer fixed.
This patch tidyup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87zfuca4e6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
R-Car Sound is using almost same register mapping on each generation,
therefore we can share it. Here indicates some memo/comments.
SSI/SSIU/SCU have multi channels (SSI0 - SSI9 etc), but ADG is single,
so, we don't need to have multi channel settings for it
- rsnd_gen_regmap_init(..., 10, ..ADG, ...);
+ rsnd_gen_regmap_init(..., 1, ..ADG, ...);
Gen4 added new SSI_BUSIF, but it is not used
Gen4 calls rsnd_gen_regmap_init() for SDMC, but the address is calculated
by rsnd_gen4_dma_addr(). It needs physical address, but other info are
not needed. use NULL conf for it.
- rsnd_gen_regmap_init(..., 10, ..SDMC, conf_sdmc);
+ rsnd_gen_regmap_init(..., 1, ..SDMC, conf_null);
Gen4 have only SSI0/SSIU0, we don't need to have multi channel settings.
- rsnd_gen_regmap_init(..., 10, ..SSI, ...);
+ rsnd_gen_regmap_init(..., 1, ..SSI, ...);
SSI_MODE2 address is different between Gen2/3 and Gen4, but it is not
used on Gen4. Thus we can share same regmap table.
Gen2/3 : 0x808
Gen4 : 0xa0c
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Khanh Le <khanh.le.xr@renesas.com>
Link: https://msgid.link/r/871q7obiyt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a new snd-soc-card KUnit test with a simple test case for
snd_soc_card_get_kcontrol() and snd_soc_card_get_kcontrol_locked().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://msgid.link/r/20240401100210.61277-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the snd_ctl_find_id_mixer[_locked]() wrapper in
snd_soc_card_get_kcontrol[_locked]() instead of open-coding a custom
list walk of the card controls list.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://msgid.link/r/20240401100210.61277-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Adds wrapper function snd_ctl_find_id_mixer_locked(). This is
identical to snd_ctl_find_id_mixer() except that it can be called
from code that is already holding controls_rwsem.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://msgid.link/r/20240401100210.61277-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Modpost warns about missing module description, add it.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://msgid.link/r/20240402130640.3310999-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We removed the configuration of ES8326_ADC_SCALE
in es8326_jack_detect_handler because user changed
the configuration by snd_controls
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://msgid.link/r/20240402062043.20608-5-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We got a headphone detection issue after suspend and resume.
And we fixed it by modifying the configuration at es8326_suspend
and invoke es8326_irq at es8326_resume.
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://msgid.link/r/20240402062043.20608-4-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We got a digital microphone feature issue. And we fixed it by modifying
the clock table. Also, we changed the marco ES8326_CLK_ON declaration
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://msgid.link/r/20240402062043.20608-3-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We got an error report about headphone type detection and button detection.
We fixed the headphone type detection error by adjusting the debounce timer
configuration. And we fixed the button detection error by disabling the
button detection feature when the headphone are unplugged and enabling it
when headphone are plugged in.
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://msgid.link/r/20240402062043.20608-2-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If acp_init() fails, acp pci driver probe should return error.
Add acp_init() function return value check logic.
Fixes: e61b415515d3 ("ASoC: amd: acp: refactor the acp init and de-init sequence")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20240329053815.2373979-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Seven Lee <wtli@nuvoton.com>:
Add a driver for the Nuvoton NAU88325.
|
|
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This last part is the continuation of Brent Lu's cleanups. Multiple
quirks have been removed to use "default" configurations and
ACPI-based detection of codecs and selection of topology files.
This cleanup has been done in multiple steps/phases since Fall 2023,
thanks Brent for this contribution!
|
|
Merge series from Frank Li <Frank.Li@nxp.com>:
Update binding doc to avoid warning.
|
|
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Core for several drivers already sets the driver.owner, so driver does
not need to. Simplify the drivers.
|
|
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Fix a set of problematic locking sequences and update error messages,
tested on SOF/SoundWire platforms.
|
|
In snd_soc_info_volsw(), mask is generated by figuring out the index of
the most significant bit set in max and converting the index to a
bitmask through bit shift 1. Unintended wraparound occurs when max is an
integer value with msb bit set. Since the bit shift value 1 is treated
as an integer type, the left shift operation will wraparound and set
mask to 0 instead of all 1's. In order to fix this, we type cast 1 as
`1ULL` to prevent the wraparound.
Fixes: 7077148fb50a ("ASoC: core: Split ops out of soc-core.c")
Signed-off-by: Stephen Lee <slee08177@gmail.com>
Link: https://msgid.link/r/20240326010131.6211-1-slee08177@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The drivers for Realtek SoundWire codecs use similar logs, which is
problematic to analyze problems reported by CI tools, e.g. "Failed to
get private value: 752001 => 0000 ret=-5". It's not uncommon to have
several Realtek devices on the same platform, having the same log
thrown makes support difficult.
This patch adds __func__ to all error logs which didn't already
include it.
No functionality change, only error logs are modified.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240325221817.206465-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The disable_irq_lock protects the 'disable_irq' value, we need to lock
before testing it.
Fixes: a0b7c59ac1a9 ("ASoC: rt722-sdca: fix for JD event handling in ClockStop Mode0")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://msgid.link/r/20240325221817.206465-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The disable_irq_lock protects the 'disable_irq' value, we need to lock
before testing it.
Fixes: 7a8735c1551e ("ASoC: rt712-sdca: fix for JD event handling in ClockStop Mode0")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://msgid.link/r/20240325221817.206465-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The disable_irq_lock protects the 'disable_irq' value, we need to lock
before testing it.
Fixes: b69de265bd0e ("ASoC: rt711: fix for JD event handling in ClockStop Mode0")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://msgid.link/r/20240325221817.206465-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The disable_irq_lock protects the 'disable_irq' value, we need to lock
before testing it.
Fixes: 23adeb7056ac ("ASoC: rt711-sdca: fix for JD event handling in ClockStop Mode0")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://msgid.link/r/20240325221817.206465-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The disable_irq_lock protects the 'disable_irq' value, we need to lock
before testing it.
Fixes: 02fb23d72720 ("ASoC: rt5682-sdw: fix for JD event handling in ClockStop Mode0")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://msgid.link/r/20240325221817.206465-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In kirkwood_dma_hw_params() mv_mbus_dram_info() returns NULL if
CONFIG_PLAT_ORION macro is not defined.
Fix this bug by adding NULL check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: bb6a40fc5a83 ("ASoC: kirkwood: Fix reference to PCM buffer address")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://msgid.link/r/20240328173337.21406-1-amishin@t-argos.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some sai only connect one direction dma (rx/tx) in SOC. For example:
imx8qxp sai5 only connect tx dma channel. So allow only one "rx" or "tx"
for dma-names.
Remove description under dmas because no user use index to get dma channel.
All user use 'dma-names' to get correct dma channel. dma-names already in
'required' list.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://msgid.link/r/20240328-asrc_8qxp-v8-3-801cd6bb5be2@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
fsl,imx8qxp-spdif and fsl,imx8qm-spdif have 2 interrupts. Other platforms
have 1 interrupt.
Increase max interrupt number to 2 and add restriction for platforms except
i.MX8QXP and i.MX8QM.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://msgid.link/r/20240328-asrc_8qxp-v8-2-801cd6bb5be2@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add power-domains property for asrc and spdif since fsl,imx8qm-asrc/spdif
and fsl,imx8qxp-asrc/spdif require 'power-domains'.
Set 'power-domains' as required property for compatible string
fsl,imx8qm-asrc/spdif and fsl,imx8qxp-asrc/spdif.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://msgid.link/r/20240328-asrc_8qxp-v8-1-801cd6bb5be2@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver is for amplifiers NAU8325 of Nuvoton Technology Corporation.
The NAU8325 is a stereo high efficiency filter-free Class-D audio
amplifier, which is capable of driving a 4ohm load with up to 3W output
power.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Link: https://msgid.link/r/20240327075755.3410381-3-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a DT schema for describing nau8325 audio amplifiers. The key features
are as follows:
- Low SPK_VDD Quiescent Current
- Gain Setting with 2-wire interface
- Powerful Stereo Class-D Amplifier
- Low Output Noise
- Low Current Shutdown Mode
- Click-and Pop Suppression
More resources :
https://www.nuvoton.com/products/smart-home-audio/audio-amplifiers/class-d-series/nau8325yg/
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://msgid.link/r/20240327075755.3410381-2-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the board config mtl_cs42l42_def to cs42l42 machine driver for all
mtl boards using default SSP port allocation (headphone codec on SSP2,
speaker amplifiers on SSP0, and BT offload on SSP1).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the board config rpl_cs42l42_def to cs42l42 machine driver for all
rpl boards using default SSP port allocation (headphone codec on SSP0,
speaker amplifiers on SSP1, and BT offload on SSP2).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a common entry in enumeration table for all cs42l42 boards
with/without speaker amplifier. All other adl_cs42l42_def entries
become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introduce "adl_cs42l42_def" for adl boards which implement headphone
codec on SSP0 and speaker amplifiers on SSP1.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add two common entries in enumeration table for all rt5682/rt5650
boards with/without speaker amplifier. All other mtl_rt5682_def
entries become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add two common entries in enumeration table for all rt5682/rt5650
boards with/without speaker amplifier. All other rpl_rt5682_def
entries become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add two common entries in enumeration table for all rt5682/rt5650
boards with/without speaker amplifier. All other adl_rt5682_def
entries become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a common entry in enumeration table for all rt5682 boards
with/without speaker amplifier. All other tgl_rt5682_def entries
become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the board config mtl_nau8825_def to nau8825 machine driver for all
mtl boards using default SSP port allocation (headphone codec on SSP2,
speaker amplifiers on SSP0, and BT offload on SSP1).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
