summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-11-07netxen: Fix link event handling.Manish Chopra1-1/+2
o Poll for the link events only if firmware doesn't have capability to notify the driver for the link events. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07enic: update desc properly in rx_copybreakGovindarajulu Varadarajan1-12/+2
When we reuse the rx buffer, we need to update the desc. If not hardware sees stale value. In the following crash, when mtu is changed, hardware sees old rx buffer value and crashes on skb_put. Fix this by using enic_queue_rq_desc helper function which updates the necessary desc. [ 64.657376] skbuff: skb_over_panic: text:ffffffffa041f55d len:9010 put:9010 head:ffff8800d3ca9fc0 data:ffff8800d3caa000 tail:0x2372 end:0x640 dev:enp0s3 [ 64.659965] ------------[ cut here ]------------ [ 64.661322] kernel BUG at net/core/skbuff.c:100! [ 64.662644] invalid opcode: 0000 [#1] PREEMPT SMP [ 64.664001] Modules linked in: rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 cirrus ttm drm_kms_helper drm enic psmouse microcode evdev serio_raw syscopyarea sysfillrect sysimgblt i2c_piix4 i2c_core pcspkr nfs lockd grace sunrpc fscache ext4 crc16 mbcache jbd2 sd_mod ata_generic virtio_balloon ata_piix libata uhci_hcd virtio_pci virtio_ring usbcore usb_common virtio scsi_mod [ 64.664834] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.17.0-netnext-10335-g942396b-dirty #273 [ 64.664834] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 64.664834] task: ffffffff81a1d580 ti: ffffffff81a00000 task.ti: ffffffff81a00000 [ 64.664834] RIP: 0010:[<ffffffff81392cf1>] [<ffffffff81392cf1>] skb_panic+0x61/0x70 [ 64.664834] RSP: 0018:ffff880210603d48 EFLAGS: 00010292 [ 64.664834] RAX: 000000000000008c RBX: ffff88020b0f6930 RCX: 0000000000000000 [ 64.664834] RDX: 000000000000008c RSI: ffffffff8178b288 RDI: 00000000ffffffff [ 64.664834] RBP: ffff880210603d68 R08: 0000000000000001 R09: 0000000000000001 [ 64.664834] R10: 00000000000005ce R11: 0000000000000001 R12: ffff88020b1f0b40 [ 64.664834] R13: 000000000000a332 R14: ffff880209a1a000 R15: 0000000000000001 [ 64.664834] FS: 0000000000000000(0000) GS:ffff880210600000(0000) knlGS:0000000000000000 [ 64.664834] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 64.664834] CR2: 00007f6752935e48 CR3: 0000000035743000 CR4: 00000000000006f0 [ 64.664834] Stack: [ 64.664834] ffff8800d3caa000 0000000000002372 0000000000000640 ffff88020b1f0000 [ 64.664834] ffff880210603d78 ffffffff81392d54 ffff880210603e08 ffffffffa041f55d [ 64.664834] 0000000000000296 ffffffff00000000 00008e7e00008e7e ffff880200002332 [ 64.664834] Call Trace: [ 64.664834] <IRQ> [ 64.664834] [ 64.664834] [<ffffffff81392d54>] skb_put+0x54/0x60 [ 64.664834] [<ffffffffa041f55d>] enic_rq_service.constprop.47+0x3ad/0x730 [enic] [ 64.664834] [<ffffffffa041fa79>] enic_poll_msix_rq+0x199/0x370 [enic] [ 64.664834] [<ffffffff813a5499>] net_rx_action+0x139/0x210 [ 64.664834] [<ffffffff81290db3>] ? __this_cpu_preempt_check+0x13/0x20 [ 64.664834] [<ffffffff8106110e>] __do_softirq+0x14e/0x280 [ 64.664834] [<ffffffff8106152e>] irq_exit+0x8e/0xb0 [ 64.664834] [<ffffffff8100fd21>] do_IRQ+0x61/0x100 [ 64.664834] [<ffffffff814a2bf2>] common_interrupt+0x72/0x72 fixes: a03bb56e67c357980dae886683733dab5583dc14 ("enic: implement rx_copybreak") Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07enic: handle error condition properly in enic_rq_indicate_bufGovindarajulu Varadarajan1-0/+6
In case of error in rx path, we free the buf->os_buf but we do not make it NULL. In next iteration we use the skb which is already freed. This causes the following crash. [ 886.154772] general protection fault: 0000 [#1] PREEMPT SMP [ 886.154851] Modules linked in: rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 microcode evdev cirrus ttm drm_kms_helper drm enic syscopyarea sysfillrect sysimgblt psmouse i2c_piix4 serio_raw pcspkr i2c_core nfs lockd grace sunrpc fscache ext4 crc16 mbcache jbd2 sd_mod crc_t10dif crct10dif_common ata_generic ata_piix virtio_balloon libata scsi_mod uhci_hcd usbcore virtio_pci virtio_ring virtio usb_common [ 886.155199] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.17.0-netnext-05668-g876bc7f #272 [ 886.155263] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 886.155304] task: ffffffff81a1d580 ti: ffffffff81a00000 task.ti: ffffffff81a00000 [ 886.155356] RIP: 0010:[<ffffffff81384030>] [<ffffffff81384030>] kfree_skb_list+0x10/0x30 [ 886.155418] RSP: 0018:ffff880210603d48 EFLAGS: 00010206 [ 886.155456] RAX: 0000000000000020 RBX: 0000000000000000 RCX: 0000000000000000 [ 886.155504] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 004500084e000017 [ 886.155553] RBP: ffff880210603d50 R08: 00000000fe13d1b6 R09: 0000000000000001 [ 886.155601] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880209ff2f00 [ 886.155650] R13: ffff88020ac0fe40 R14: ffff880209ff2f00 R15: ffff8800da8e3a80 [ 886.155699] FS: 0000000000000000(0000) GS:ffff880210600000(0000) knlGS:0000000000000000 [ 886.155774] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 886.155814] CR2: 00007f0e0c925000 CR3: 0000000035e8b000 CR4: 00000000000006f0 [ 886.155865] Stack: [ 886.155882] 0000000000000000 ffff880210603d78 ffffffff81383f79 ffff880209ff2f00 [ 886.155942] ffff88020b0c0b40 000000000000c000 ffff880210603d90 ffffffff81383faf [ 886.156001] ffff880209ff2f00 ffff880210603da8 ffffffff8138406d ffff88020b1b08c0 [ 886.156061] Call Trace: [ 886.156080] <IRQ> [ 886.156095] [ 886.156112] [<ffffffff81383f79>] skb_release_data+0xa9/0xc0 [ 886.157656] [<ffffffff81383faf>] skb_release_all+0x1f/0x30 [ 886.159195] [<ffffffff8138406d>] consume_skb+0x1d/0x40 [ 886.160719] [<ffffffff813942e5>] __dev_kfree_skb_any+0x35/0x40 [ 886.162224] [<ffffffffa02dc1d5>] enic_rq_service.constprop.47+0xe5/0x5a0 [enic] [ 886.163756] [<ffffffffa02dc829>] enic_poll_msix_rq+0x199/0x370 [enic] [ 886.164730] [<ffffffff81397e29>] net_rx_action+0x139/0x210 [ 886.164730] [<ffffffff8105fb2e>] __do_softirq+0x14e/0x280 [ 886.164730] [<ffffffff8105ff2e>] irq_exit+0x8e/0xb0 [ 886.164730] [<ffffffff8100fc1d>] do_IRQ+0x5d/0x100 [ 886.164730] [<ffffffff81496832>] common_interrupt+0x72/0x72 fixes: a03bb56e67c357980dae886683733dab5583dc14 ("enic: implement rx_copybreak") Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07Merge branch 'mlx5-net'David S. Miller2-6/+5
Eli Cohen says: ==================== mlx5_core fixes for 3.18 the following two patches fix races to could lead to kernel panic in some cases. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07net/mlx5_core: Fix race on driver loadEli Cohen1-2/+2
When events arrive at driver load, the event handler gets called even before the spinlock and list are initialized. Fix this by moving the initialization before EQs creation. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07net/mlx5_core: Fix race in create EQEli Cohen1-4/+3
After the EQ is created, it can possibly generate interrupts and the interrupt handler is referencing eq->dev. It is therefore required to set eq->dev before calling request_irq() so if an event is generated before request_irq() returns, we will have a valid eq->dev field. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06net: dsa: slave: Fix autoneg for phys on switch MDIO busAndrew Lunn1-2/+5
When the ports phys are connected to the switches internal MDIO bus, we need to connect the phy to the slave netdev, otherwise auto-negotiation etc, does not work. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06net/9p: remove a comment about pref member which doesn't existRyo Munakata1-1/+0
Signed-off-by: Ryo Munakata <ryomnktml@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06drivers: net: cpsw: remove cpsw_ale_stop from cpsw_ale_destroyMugunthan V N1-1/+0
when cpsw is build as modulea and simple insert and removal of module creates a deadlock, due to delete timer. the timer is created and destroyed in cpsw_ale_start and cpsw_ale_stop which are from device open and close. root@am437x-evm:~# modprobe -r ti_cpsw [ 158.505333] INFO: trying to register non-static key. [ 158.510623] the code is fine but needs lockdep annotation. [ 158.516448] turning off the locking correctness validator. [ 158.522282] CPU: 0 PID: 1339 Comm: modprobe Not tainted 3.14.23-00445-gd41c88f #44 [ 158.530359] [<c0015380>] (unwind_backtrace) from [<c0012088>] (show_stack+0x10/0x14) [ 158.538603] [<c0012088>] (show_stack) from [<c054ad70>] (dump_stack+0x78/0x94) [ 158.546295] [<c054ad70>] (dump_stack) from [<c0088008>] (__lock_acquire+0x176c/0x1b74) [ 158.554711] [<c0088008>] (__lock_acquire) from [<c0088944>] (lock_acquire+0x9c/0x104) [ 158.563043] [<c0088944>] (lock_acquire) from [<c004e520>] (del_timer_sync+0x44/0xd8) [ 158.571289] [<c004e520>] (del_timer_sync) from [<bf2eac1c>] (cpsw_ale_destroy+0x10/0x3c [ti_cpsw]) [ 158.580821] [<bf2eac1c>] (cpsw_ale_destroy [ti_cpsw]) from [<bf2eb268>] (cpsw_remove+0x30/0xa0 [ti_cpsw]) [ 158.591000] [<bf2eb268>] (cpsw_remove [ti_cpsw]) from [<c035ef44>] (platform_drv_remove+0x18/0x1c) [ 158.600527] [<c035ef44>] (platform_drv_remove) from [<c035d8bc>] (__device_release_driver+0x70/0xc8) [ 158.610236] [<c035d8bc>] (__device_release_driver) from [<c035e0d4>] (driver_detach+0xb4/0xb8) [ 158.619386] [<c035e0d4>] (driver_detach) from [<c035d6e4>] (bus_remove_driver+0x4c/0x90) [ 158.627988] [<c035d6e4>] (bus_remove_driver) from [<c00af2a8>] (SyS_delete_module+0x10c/0x198) [ 158.637144] [<c00af2a8>] (SyS_delete_module) from [<c000e580>] (ret_fast_syscall+0x0/0x48) [ 179.524727] INFO: rcu_sched detected stalls on CPUs/tasks: {} (detected by 0, t=2102 jiffies, g=1487, c=1486, q=6) [ 179.535741] INFO: Stall ended before state dump start Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06net: mv643xx_eth: reclaim TX skbs only when released by the HWKarl Beldan1-8/+10
ATM, txq_reclaim will dequeue and free an skb for each tx desc released by the hw that has TX_LAST_DESC set. However, in case of TSO, each hw desc embedding the last part of a segment has TX_LAST_DESC set, losing the one-to-one 'last skb frag'/'TX_LAST_DESC set' correspondance, which causes data corruption. Fix this by checking TX_ENABLE_INTERRUPT instead of TX_LAST_DESC, and warn when trying to dequeue from an empty txq (which can be symptomatic of releasing skbs prematurely). Fixes: 3ae8f4e0b98 ('net: mv643xx_eth: Implement software TSO') Reported-by: Slawomir Gajzner <slawomir.gajzner@gmail.com> Reported-by: Julien D'Ascenzio <jdascenzio@yahoo.fr> Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06bridge: include in6.h in if_bridge.h for struct in6_addrGregory Fong1-0/+1
if_bridge.h uses struct in6_addr ip6, but wasn't including the in6.h header. Thomas Backlund originally sent a patch to do this, but this revealed a redefinition issue: https://lkml.org/lkml/2013/1/13/116 The redefinition issue should have been fixed by the following Linux commits: ee262ad827f89e2dc7851ec2986953b5b125c6bc inet: defines IPPROTO_* needed for module alias generation cfd280c91253cc28e4919e349fa7a813b63e71e8 net: sync some IP headers with glibc and the following glibc commit: 6c82a2f8d7c8e21e39237225c819f182ae438db3 Coordinate IPv6 definitions for Linux and glibc so actually include the header now. Reported-by: Colin Guthrie <colin@mageia.org> Reported-by: Christiaan Welvaart <cjw@daneel.dyndns.org> Reported-by: Thomas Backlund <tmb@mageia.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06tcp: zero retrans_stamp if all retrans were ackedMarcelo Leitner1-29/+31
Ueki Kohei reported that when we are using NewReno with connections that have a very low traffic, we may timeout the connection too early if a second loss occurs after the first one was successfully acked but no data was transfered later. Below is his description of it: When SACK is disabled, and a socket suffers multiple separate TCP retransmissions, that socket's ETIMEDOUT value is calculated from the time of the *first* retransmission instead of the *latest* retransmission. This happens because the tcp_sock's retrans_stamp is set once then never cleared. Take the following connection: Linux remote-machine | | send#1---->(*1)|--------> data#1 --------->| | | | RTO : : | | | ---(*2)|----> data#1(retrans) ---->| | (*3)|<---------- ACK <----------| | | | | : : | : : | : : 16 minutes (or more) : | : : | : : | : : | | | send#2---->(*4)|--------> data#2 --------->| | | | RTO : : | | | ---(*5)|----> data#2(retrans) ---->| | | | | | | RTO*2 : : | | | | | | ETIMEDOUT<----(*6)| | (*1) One data packet sent. (*2) Because no ACK packet is received, the packet is retransmitted. (*3) The ACK packet is received. The transmitted packet is acknowledged. At this point the first "retransmission event" has passed and been recovered from. Any future retransmission is a completely new "event". (*4) After 16 minutes (to correspond with retries2=15), a new data packet is sent. Note: No data is transmitted between (*3) and (*4). The socket's timeout SHOULD be calculated from this point in time, but instead it's calculated from the prior "event" 16 minutes ago. (*5) Because no ACK packet is received, the packet is retransmitted. (*6) At the time of the 2nd retransmission, the socket returns ETIMEDOUT. Therefore, now we clear retrans_stamp as soon as all data during the loss window is fully acked. Reported-by: Ueki Kohei Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Acked-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06Merge branch 'stmmac-net'David S. Miller1-23/+29
Giuseppe Cavallaro says: ==================== stmmac: review and fix lock and atomicity Recently some issues have been reported for the driver for locking mechanism and atomicity. In fact, enabling DEBUG support to prove lock and to verify if sleeping while atomic context some warnings occur at runtime. I have reproduced all on STi platforms. Concerning the tx path, I had provided a patch time ago but I discarded the idea to completely remove locks; in this patch-set we can have some useful fixes instead of. This patch-set is to fix the atomicity in the PM stuff where I tried to collect all the points and advice reported in the past weeks. As final result, on my side no warnings and no problem when suspend/resume the driver on STi boxes. I also added a patch that fixes the locks for the EEE. As pointed in some thread there was a design problem behind the eee initialization and I have tried to fix that before. As final result no issues when proving locks too. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06stmmac: fix atomicity in pm routinesGiuseppe CAVALLARO1-13/+16
This patch is to fix the atomicity when suspend and resume the driver. The clk api have been changed (as reported by Hao Liang) and the skb allocation is done out of the hw setup function and taking care about the GFP flags. Reported-by: Hao Liang <hliang1025@gmail.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Hao Liang <hliang1025@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06stmmac: fix concurrency in eee initialization.Giuseppe CAVALLARO1-6/+9
This patch aims to fix the concurrency in eee initialization inside the stmmac driver and related warnings when enable DEBUG_ATOMIC_SLEEP. Prior this patch, the stmmac_eee_init could be called in several places as shown below: stmmac_open stmmac_resume PHY Layer | | | stmmac_hw_setup stmmac_adjust_link | | stmmac ethtool |__________________________|______________| | stmmac_eee_init The patch removes the stmmac_eee_init call inside the stmmac_hw_setup that is unnecessary. It is sufficient to call it in the adjust_link to always guarantee that EEE is always configured at mac level too. Fixing the lock protection now it is covered another case (not considered before). The stmmac_eee_init could be called by the ethtool so critical sections must be protected inside this function too. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06stmmac: fix lock in stmmac_set_rx_modeGiuseppe CAVALLARO1-2/+0
When compile with CONFIG_PROVE_LOCKING the following warnings happen: [snip] HARDIRQ-ON-W at: [<c0480c1c>] _raw_spin_lock+0x3c/0x4c [<c02c2828>] stmmac_set_rx_mode+0x18/0x3c [<c038b2cc>] dev_set_rx_mode+0x1c/0x28 [<c038b38c>] __dev_open+0xb4/0xf8 [<c038b5a8>] __dev_change_flags+0x94/0x128 [<c038b6a8>] dev_change_flags+0x10/0x48 [<c062afe0>] ip_auto_config+0x1d4/0x1084 [<c000873c>] do_one_initcall+0x108/0x15c [<c060ec50>] kernel_init_freeable+0x1a8/0x248 [<c0472cc0>] kernel_init+0x8/0x160 [<c000dfc8>] ret_from_fork+0x14/0x2c INITIAL USE at: [<c0480c1c>] _raw_spin_lock+0x3c/0x4c [<c02c2828>] stmmac_set_rx_mode+0x18/0x3c [<c038b2cc>] dev_set_rx_mode+0x1c/0x28 [<c038b38c>] __dev_open+0xb4/0xf8 [<c038b5a8>] __dev_change_flags+0x94/0x128 [<c038b6a8>] dev_change_flags+0x10/0x48 [<c062afe0>] ip_auto_config+0x1d4/0x1084 [<c000873c>] do_one_initcall+0x108/0x15c [<c060ec50>] kernel_init_freeable+0x1a8/0x248 [<c0472cc0>] kernel_init+0x8/0x160 [<c000dfc8>] ret_from_fork+0x14/0x2c so the patch just removes the lock protection in the stmmac_set_rx_mode Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Emilio Lopez <emilio@elopez.com.ar> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06stmmac: release tx lock, in case of dma mapping error.Fabrice Gasnier1-0/+1
Add missing spin_unlock when tx frames gets dropped. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06stmmac: fix stmmac_tx_avail should be called with TX lockedFabrice Gasnier1-2/+3
stmmac_tx_avail() may lie if used unprotected. It's using cur_tx and dirty_tx index. These index may be already in use by tx_clean when entering xmit routine. So, this should be called locked. This can cause transmit queue to be stuck, with following message: NETDEV WATCHDOG: eth0 (stmmaceth): transmit queue 0 timed out Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06drivers: net: ethernet: xilinx: xilinx_emaclite: revert the original commit ↵Chen Gang1-1/+0
"1db3ddff1602edf2390b7667dcbaa0f71512e3ea" Microblaze is a fpga soft core, it can be customized easily, which may cause many various hardware version strings. So the original fix patch based on hard-coded compatible version strings is not a good idea (although it is correct for current issue). For it, there will be a new solving way soon (which based on the device tree). The original issue is related with qemu, so can only change the hardware version string in qemu for it, then keep the original driver no touch ( qemu is for virtualization which has much easier life than real world). Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05include/linux/socket.h: Fix commentRasmus Villemoes1-1/+1
File descriptors are always closed on exit :-) Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05net: Add missing descriptions for fwmark_reflect for ipv4 and ipv6.Loganaden Velvindron1-0/+14
It was initially sent by Lorenzo Colitti, but was subsequently lost in the final diff he submitted. Signed-off-by: Loganaden Velvindron <logan@elandsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05geneve: Unregister pernet subsys on module unload.Jesse Gross1-0/+1
The pernet ops aren't ever unregistered, which causes a memory leak and an OOPs if the module is ever reinserted. Fixes: 0b5e8b8eeae4 ("net: Add Geneve tunneling protocol driver") CC: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05geneve: Set GSO type on transmit.Jesse Gross1-0/+2
Geneve does not currently set the inner protocol type when transmitting packets. This causes GSO segmentation to fail on NICs that do not support Geneve offloading. CC: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05Merge branch 'xgene-net'David S. Miller7-13/+49
Iyappan Subramanian says: ==================== drivers: net: xgene: Fix crash for backward compatibility This patch set fixes the following issues that were reported during regression. Patch 1,2 : Adds backward compatibility with the older firmware (<= 1.13.28). Patch 3 : Use separate hardware resources (descriptor ring, prefetch buffer) that are not shared with the firmware ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05drivers: net: xgene: fix: Use separate resourcesIyappan Subramanian2-3/+6
This patch fixes the following kernel crash during SGMII based 1GbE probe. BUG: Bad page state in process swapper/0 pfn:40fe6ad page:ffffffbee37a75d8 count:-1 mapcount:0 mapping: (null) index:0x0 flags: 0x0() page dumped because: nonzero _count Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.17.0+ #7 Call trace: [<ffffffc000087fa0>] dump_backtrace+0x0/0x12c [<ffffffc0000880dc>] show_stack+0x10/0x1c [<ffffffc0004d981c>] dump_stack+0x74/0xc4 [<ffffffc00012fe70>] bad_page+0xd8/0x128 [<ffffffc000133000>] get_page_from_freelist+0x4b8/0x640 [<ffffffc000133260>] __alloc_pages_nodemask+0xd8/0x834 [<ffffffc0004194f8>] __netdev_alloc_frag+0x124/0x1b8 [<ffffffc00041bfdc>] __netdev_alloc_skb+0x90/0x10c [<ffffffc00039ff30>] xgene_enet_refill_bufpool+0x11c/0x280 [<ffffffc0003a11a4>] xgene_enet_process_ring+0x168/0x340 [<ffffffc0003a1498>] xgene_enet_napi+0x1c/0x50 [<ffffffc00042b454>] net_rx_action+0xc8/0x18c [<ffffffc0000b0880>] __do_softirq+0x114/0x24c [<ffffffc0000b0c34>] irq_exit+0x94/0xc8 [<ffffffc0000e68a0>] __handle_domain_irq+0x8c/0xf4 [<ffffffc000081288>] gic_handle_irq+0x30/0x7c This was due to hardware resource sharing conflict with the firmware. This patch fixes this crash by using resources (descriptor ring, prefetch buffer) that are not shared. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05drivers: net: xgene: Backward compatibility with older firmwareIyappan Subramanian6-5/+38
This patch adds support when used with older firmware (<= 1.13.28). - Added xgene_ring_mgr_init() to check whether ring manager is initialized - Calling xgene_ring_mgr_init() from xgene_port_ops.reset() - To handle errors, changed the return type of xgene_port_ops.reset() Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05dtb: xgene: fix: Backward compatibility with older firmwareIyappan Subramanian1-5/+5
The following kernel crash was reported when using older firmware (<= 1.13.28). [ 0.980000] libphy: APM X-Gene MDIO bus: probed [ 1.130000] Unhandled fault: synchronous external abort (0x96000010) at 0xffffff800009a17c [ 1.140000] Internal error: : 96000010 [#1] SMP [ 1.140000] Modules linked in: [ 1.140000] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.17.0+ #21 [ 1.140000] task: ffffffc3f0110000 ti: ffffffc3f0064000 task.ti: ffffffc3f0064000 [ 1.140000] PC is at ioread32+0x58/0x68 [ 1.140000] LR is at xgene_enet_setup_ring+0x18c/0x1cc [ 1.140000] pc : [<ffffffc0003cec68>] lr : [<ffffffc00053dad8>] pstate: a0000045 [ 1.140000] sp : ffffffc3f0067b20 [ 1.140000] x29: ffffffc3f0067b20 x28: ffffffc000aa8ea0 [ 1.140000] x27: ffffffc000bb2000 x26: ffffffc000a64270 [ 1.140000] x25: ffffffc000b05ad8 x24: ffffffc0ff99ba58 [ 1.140000] x23: 0000000000004000 x22: 0000000000004000 [ 1.140000] x21: 0000000000000200 x20: 0000000000200000 [ 1.140000] x19: ffffffc0ff99ba18 x18: ffffffc0007a6000 [ 1.140000] x17: 0000000000000007 x16: 000000000000000e [ 1.140000] x15: 0000000000000001 x14: 0000000000000000 [ 1.140000] x13: ffffffbeedb71320 x12: 00000000ffffff80 [ 1.140000] x11: 0000000000000002 x10: 0000000000000000 [ 1.140000] x9 : 0000000000000000 x8 : ffffffc3eb2a4000 [ 1.140000] x7 : 0000000000000000 x6 : 0000000000000000 [ 1.140000] x5 : 0000000001080000 x4 : 000000007d654010 [ 1.140000] x3 : ffffffffffffffff x2 : 000000000003ffff [ 1.140000] x1 : ffffff800009a17c x0 : ffffff800009a17c The issue was that the older firmware does not support 10GbE and SGMII based 1GBE interfaces. This patch changes the address length of the reg property of sgmii0 and xgmii nodes and serves as preparatory patch for the fix. Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Reported-by: Dann Frazier <dann.frazier@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03sfc: don't BUG_ON efx->max_channels == 0 in probeEdward Cree1-1/+2
efx_ef10_probe() was BUGging out if the BAR2 size was 0. This is unnecessarily violent; instead we should just fail to probe the device. Kept a WARN_ON as this problem indicates a broken or misconfigured NIC. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03Merge branch 'ipv6_tunnel_iflink_init'David S. Miller4-30/+11
Steffen Klassert says: ==================== ipv6: Fix iflink setting for ipv6 tunnels The ipv6 tunnels do the dev->iflink setting too early, it gets overwritten by register_netdev(). So set dev->iflink from within a ndo_init function to keep the configured setting. This patchset fixes this for ip6_tunnel, vti6, sit and gre6. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03gre6: Move the setting of dev->iflink into the ndo_init functions.Steffen Klassert1-2/+3
Otherwise it gets overwritten by register_netdev(). Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03sit: Use ipip6_tunnel_init as the ndo_init function.Steffen Klassert1-9/+6
ipip6_tunnel_init() sets the dev->iflink via a call to ipip6_tunnel_bind_dev(). After that, register_netdevice() sets dev->iflink = -1. So we loose the iflink configuration for ipv6 tunnels. Fix this by using ipip6_tunnel_init() as the ndo_init function. Then ipip6_tunnel_init() is called after dev->iflink is set to -1 from register_netdevice(). Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03vti6: Use vti6_dev_init as the ndo_init function.Steffen Klassert1-10/+1
vti6_dev_init() sets the dev->iflink via a call to vti6_link_config(). After that, register_netdevice() sets dev->iflink = -1. So we loose the iflink configuration for vti6 tunnels. Fix this by using vti6_dev_init() as the ndo_init function. Then vti6_dev_init() is called after dev->iflink is set to -1 from register_netdevice(). Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03ip6_tunnel: Use ip6_tnl_dev_init as the ndo_init function.Steffen Klassert1-9/+1
ip6_tnl_dev_init() sets the dev->iflink via a call to ip6_tnl_link_config(). After that, register_netdevice() sets dev->iflink = -1. So we loose the iflink configuration for ipv6 tunnels. Fix this by using ip6_tnl_dev_init() as the ndo_init function. Then ip6_tnl_dev_init() is called after dev->iflink is set to -1 from register_netdevice(). Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03macvtap: Fix csum_start when VLAN tags are presentHerbert Xu1-0/+2
When VLAN is in use in macvtap_put_user, we end up setting csum_start to the wrong place. The result is that the whoever ends up doing the checksum setting will corrupt the packet instead of writing the checksum to the expected location, usually this means writing the checksum with an offset of -4. This patch fixes this by adjusting csum_start when VLAN tags are detected. Fixes: f09e2249c4f5 ("macvtap: restore vlan header on user read") Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cheers, Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03net: fec: fix suspend broken on multiple MACs silliconsNimrod Andy1-8/+8
On i.MX6SX sdb platform, there has two same enet MACs, after system up, just eth0 is up, and then do suspend/resume test: [ 50.437967] PM: Syncing filesystems ... done. [ 50.476924] Freezing user space processes ... (elapsed 0.005 seconds) done. [ 50.490093] Freezing remaining freezable tasks ... (elapsed 0.004 seconds) done. [ 50.559771] ------------[ cut here ]------------ [ 50.564453] WARNING: CPU: 0 PID: 575 at drivers/clk/clk.c:851 __clk_disable+0x60/0x6c() [ 50.572475] Modules linked in: [ 50.575578] CPU: 0 PID: 575 Comm: sh Not tainted 3.18.0-rc2-next-20141031-00007-gf61135b #21 [ 50.584031] Backtrace: [ 50.586550] [<80011ecc>] (dump_backtrace) from [<8001206c>] (show_stack+0x18/0x1c) [ 50.594136] r6:808a7a54 r5:00000000 r4:00000000 r3:00000000 [ 50.599920] [<80012054>] (show_stack) from [<806ab3c0>] (dump_stack+0x80/0x9c) [ 50.607187] [<806ab340>] (dump_stack) from [<8002a3e8>] (warn_slowpath_common+0x6c/0x8c) [ 50.615294] r5:00000353 r4:00000000 [ 50.618940] [<8002a37c>] (warn_slowpath_common) from [<8002a42c>] (warn_slowpath_null+0x24/0x2c) [ 50.627738] r8:00000000 r7:be144c44 r6:be015600 r5:80070013 r4:be015600 [ 50.634573] [<8002a408>] (warn_slowpath_null) from [<804f8d4c>] (__clk_disable+0x60/0x6c) [ 50.642777] [<804f8cec>] (__clk_disable) from [<804f8e5c>] (clk_disable+0x2c/0x38) [ 50.650359] r4:be015600 r3:00000000 [ 50.654006] [<804f8e30>] (clk_disable) from [<80420ab4>] (fec_enet_clk_enable+0xc4/0x258) [ 50.662196] r5:be3cb620 r4:be3cb000 [ 50.665838] [<804209f0>] (fec_enet_clk_enable) from [<80421178>] (fec_suspend+0x30/0x180) [ 50.674026] r7:be144c44 r6:be144c10 r5:8037f5a4 r4:be3cb000 [ 50.679802] [<80421148>] (fec_suspend) from [<8037f5d8>] (platform_pm_suspend+0x34/0x64) [ 50.687906] r10:00000000 r9:00000000 r8:00000000 r7:be144c44 r6:be144c10 r5:8037f5a4 [ 50.695852] r4:be144c10 r3:80421148 [ 50.699511] [<8037f5a4>] (platform_pm_suspend) from [<8038784c>] (dpm_run_callback.isra.14+0x34/0x6c) [ 50.708764] [<80387818>] (dpm_run_callback.isra.14) from [<80387f00>] (__device_suspend+0x12c/0x2a4) [ 50.717909] r9:8098ec8c r8:80973bec r6:00000002 r5:811c7038 r4:be144c10 [ 50.724746] [<80387dd4>] (__device_suspend) from [<803894fc>] (dpm_suspend+0x64/0x224) [ 50.732675] r8:80973bec r7:be144c10 r6:8098ec24 r5:811c7038 r4:be144cc4 [ 50.739509] [<80389498>] (dpm_suspend) from [<8038999c>] (dpm_suspend_start+0x60/0x68) [ 50.747438] r10:8082fa24 r9:00000000 r8:00000004 r7:00000003 r6:00000000 r5:8116ec80 [ 50.755386] r4:00000002 [ 50.757969] [<8038993c>] (dpm_suspend_start) from [<800679d8>] (suspend_devices_and_enter+0x90/0x3ec) [ 50.767202] r4:00000003 r3:8116eca0 [ 50.770843] [<80067948>] (suspend_devices_and_enter) from [<80067f40>] (pm_suspend+0x20c/0x2a4) [ 50.779553] r8:00000004 r7:00000003 r6:00000000 r5:8116ec8c r4:00000003 [ 50.786394] [<80067d34>] (pm_suspend) from [<80066858>] (state_store+0x70/0xc0) [ 50.793718] r6:8116ec90 r5:00000003 r4:bd88a800 r3:0000006d [ 50.799496] [<800667e8>] (state_store) from [<802b0384>] (kobj_attr_store+0x1c/0x28) [ 50.807251] r10:bd399f78 r8:00000000 r7:bd88a800 r6:bd88a800 r5:00000004 r4:bd085680 [ 50.815219] [<802b0368>] (kobj_attr_store) from [<80153090>] (sysfs_kf_write+0x54/0x58) [ 50.823252] [<8015303c>] (sysfs_kf_write) from [<80151fd8>] (kernfs_fop_write+0xd0/0x194) [ 50.831441] r6:00000004 r5:bd08568c r4:bd085680 r3:8015303c [ 50.837220] [<80151f08>] (kernfs_fop_write) from [<800eddb4>] (vfs_write+0xb8/0x1a8) [ 50.844975] r10:00000000 r9:00000000 r8:00000000 r7:bd399f78 r6:01336408 r5:00000004 [ 50.852924] r4:bc584dc0 [ 50.855505] [<800edcfc>] (vfs_write) from [<800ee0b8>] (SyS_write+0x48/0x88) [ 50.862567] r10:00000000 r8:00000000 r7:01336408 r6:00000004 r5:bc584dc0 r4:bc584dc0 [ 50.870537] [<800ee070>] (SyS_write) from [<8000eb00>] (ret_fast_syscall+0x0/0x48) [ 50.878120] r9:bd398000 r8:8000ecc4 r7:00000004 r6:76f42b48 r5:01336408 r4:00000004 [ 50.885983] ---[ end trace 7545115d752a316a ]--- [ 50.890765] ------------[ cut here ]------------ The root cause is that eth1 is not opened and clock is not enabled, and .suspend() still call .fec_enet_clk_enable() to disable clock. To avoid the broken, let it check network device up status by calling .netif_running() before disable/enable clocks. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03Merge branch 'tun-net'David S. Miller1-11/+17
Herbert Xu says: ==================== tun: Fix csum_start and TUN_PKT_STRIP The first patch fixes a serious problem that breaks checksum offload in VMs while the second patch fixes a problem that probably affects no one. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03tun: Fix TUN_PKT_STRIP settingHerbert Xu1-4/+8
We set the flag TUN_PKT_STRIP if the user buffer provided is too small to contain the entire packet plus meta-data. However, this has been broken ever since we added GSO meta-data. VLAN acceleration also has the same problem. This patch fixes this by taking both into account when setting the TUN_PKT_STRIP flag. The fact that this has been broken for six years without anyone realising means that nobody actually uses this flag. Fixes: f43798c27684 ("tun: Allow GSO using virtio_net_hdr") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03tun: Fix csum_start with VLAN accelerationHerbert Xu1-7/+9
When VLAN acceleration is in use on the xmit path, we end up setting csum_start to the wrong place. The result is that the whoever ends up doing the checksum setting will corrupt the packet instead of writing the checksum to the expected location, usually this means writing the checksum with an offset of -4. This patch fixes this by adjusting csum_start when VLAN acceleration is detected. Fixes: 6680ec68eff4 ("tuntap: hardware vlan tx support") Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03uapi: add missing network related headers to kbuildstephen hemminger1-0/+4
The makefile for sanitizing kernel headers uses the kbuild file to determine which files to do. Several networking related headers were missing. Without these headers iproute2 build would break. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-03netfilter: nft_reject_bridge: Fix powerpc build errorGuenter Roeck1-0/+1
Fix: net/bridge/netfilter/nft_reject_bridge.c: In function 'nft_reject_br_send_v6_unreach': net/bridge/netfilter/nft_reject_bridge.c:240:3: error: implicit declaration of function 'csum_ipv6_magic' csum_ipv6_magic(&nip6h->saddr, &nip6h->daddr, ^ make[3]: *** [net/bridge/netfilter/nft_reject_bridge.o] Error 1 Seen with powerpc:allmodconfig. Fixes: 523b929d5446 ("netfilter: nft_reject_bridge: don't use IP stack to reject traffic") Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-02smc91x: retrieve IRQ and trigger flags in a modern wayLinus Walleij1-8/+12
The SMC91x is written to explicitly look up the IRQ resource from the platform device and extract the IRQ and flags, however the platform_get_irq() does additional things, like call of_irq_get() in the device tree case, which will translate the IRQ using the irqdomain and defer the probe if the IRQ host cannot be found. As we're not looking up the resource, this will not retrieve the IRQ flags, but that is better done using irqd_get_trigger_type(), as the trigger is what the driver wants to modify. We take care to preserve the semantics that will make the trigger type provided from the resource override any local specifier. Tested on the Nomadik NHK15 which has its SMC91x IRQ line connected to a STMPE2401 GPIO expander on I2C. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-02drivers: net: ethernet: xilinx: xilinx_emaclite: Compatible with 'xlnx, ↵Chen Gang1-0/+1
xps-ethernetlite-2.00.b' for QEMU using When use current latest upstream qemu (current version: 2.1.2), need let driver compatible with 'xlnx,xps-ethernetlite-2.00.b', or can not find net device in microblaze qemu. Related QEMU commands under fedora 20: yum install libvirt yum install tunctl tunctl -b ip link set tap0 up brctl addif virbr0 tap0 ./microblaze-softmmu/qemu-system-microblaze -M petalogix-s3adsp1800 \ -kernel ../linux-stable.microblaze/arch/microblaze/boot/linux.bin \ -no-reboot -append "console=ttyUL0,115200 doreboot" -nographic \ -net nic,vlan=0,model=xlnx.xps-ethernetlite,macaddr=00:16:35:AF:94:00 \ -net tap,vlan=0,ifname=tap0,script=no,downscript=no in microblaze qemu bash (guest machine): ifconfig eth0 add 192.168.122.2 netmask 255.255.255.0 ifconfig eth0 up After add this patch, can find the device, and can be used by 'telnetd' (need cross-build busybox with glibc for it), then outside can telnet to it without password. Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-01Merge branch 'systemport-net'David S. Miller1-2/+11
Florian Fainelli says: ==================== net: systemport: TX dma fixes This patch series contains two fixes for our transmit path, first one is a pretty nasty one since we were not allocating a large enough dma coherent pool for our transmit descriptors, which would work most of the time, since allocations are contiguous and we could have. Second patch fixes a less frequent, though highly likley crash when using CMA allocations. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-01net: systemport: do not crash freeing an unitialized TX ringFlorian Fainelli1-0/+7
Callers of bcm_sysport_init_tx_ring() can currently fail, and will always call bcm_sysport_fini_tx_ring() in a loop ending at the number of TX queues (32) without checking if the TX ring was successfully initialized or not. Update bcm_sysport_fini_tx_ring() to return early and avoid a crash de-referencing ring->cbs if the TX ring was not initialized, since ring->cbs is the last part of the initialization done by bcm_sysport_init_tx_ring() that could fail. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Reported-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-01net: systemport: fix DMA allocation/freeing sizesFlorian Fainelli1-2/+4
We should not be allocating a single byte of DMA coherent memory, but instead a full-sized struct dma_desc (8 bytes). Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-01net: mvpp2: fix possible memory leakSudip Mukherjee1-9/+18
we are allocating memory using kzalloc for struct mvpp2_prs_entry, but later when we are getting error we were just returning the error value without releasing the memory. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-01sunhme: Add DMA mapping error checks.David S. Miller1-5/+57
Reported-by: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-01Merge branch 'for-linus' of ↵Linus Torvalds12-29/+302
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A bunch of fixes for minor defects reported by Coverity, a few driver fixups and revert of i8042.nomux change so that we are once again enable active MUX mode if box claims to support it" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: i8042 - disable active multiplexing by default" Input: altera_ps2 - use correct type for irq return value Input: altera_ps2 - write to correct register when disabling interrupts Input: max77693-haptic - fix potential overflow Input: psmouse - remove unneeded check in psmouse_reconnect() Input: vsxxxaa - fix code dropping bytes from queue Input: ims-pcu - fix dead code in ims_pcu_ofn_reg_addr_store() Input: opencores-kbd - fix error handling Input: wm97xx - adapt parameters to tosa touchscreen. Input: i8042 - quirks for Fujitsu Lifebook A544 and Lifebook AH544 Input: stmpe-keypad - fix valid key line bitmask Input: soc_button_array - update calls to gpiod_get*()
2014-11-01Merge tag 'pm+acpi-3.18-rc3' of ↵Linus Torvalds5-53/+126
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: "These are fixes received after my previous pull request plus one that has been in the works for quite a while, but its previous version caused problems to happen, so it's been deferred till now. Fixed are two recent regressions (MFD enumeration and cpufreq-dt), ACPI EC regression introduced in 3.17, system suspend error code path regression introduced in 3.15, an older bug related to recovery from failing resume from hibernation and a cpufreq-dt driver issue related to operation performance points. Specifics: - Fix a crash on r8a7791/koelsch during resume from system suspend caused by a recent cpufreq-dt commit (Geert Uytterhoeven). - Fix an MFD enumeration problem introduced by a recent commit adding ACPI support to the MFD subsystem that exposed a weakness in the ACPI core causing ACPI enumeration to be applied to all devices associated with one ACPI companion object, although it should be used for one of them only (Mika Westerberg). - Fix an ACPI EC regression introduced during the 3.17 cycle causing some Samsung laptops to misbehave as a result of a workaround targeted at some Acer machines. That includes a revert of a commit that went too far and a quirk for the Acer machines in question. From Lv Zheng. - Fix a regression in the system suspend error code path introduced during the 3.15 cycle that causes it to fail to take errors from asychronous execution of "late" suspend callbacks into account (Imre Deak). - Fix a long-standing bug in the hibernation resume error code path that fails to roll back everything correcty on "freeze" callback errors and leaves some devices in a "suspended" state causing more breakage to happen subsequently (Imre Deak). - Make the cpufreq-dt driver disable operation performance points that are not supported by the VR connected to the CPU voltage plane with acceptable tolerance instead of constantly failing voltage scaling later on (Lucas Stach)" * tag 'pm+acpi-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / EC: Fix regression due to conflicting firmware behavior between Samsung and Acer. Revert "ACPI / EC: Add support to disallow QR_EC to be issued before completing previous QR_EC" cpufreq: cpufreq-dt: Restore default cpumask_setall(policy->cpus) PM / Sleep: fix recovery during resuming from hibernation PM / Sleep: fix async suspend_late/freeze_late error handling ACPI: Use ACPI companion to match only the first physical device cpufreq: cpufreq-dt: disable unsupported OPPs
2014-11-01Merge tag 'pci-v3.18-fixes-1' of ↵Linus Torvalds3-14/+14
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "These changes, intended for v3.18, fix: Sysfs - Fix "enable" filename change (Greg Kroah-Hartman) An unintentional sysfs filename change in commit 5136b2da770d ("PCI: convert bus code to use dev_groups"), which appeared in v3.13, changed "enable" to "enabled", and this changes it back. Old users of "enable" are currently broken and will be helped by this change. Anything that started to use "enabled" after v3.13 will be broken by this change. If necessary, we can add a symlink to make both work, but this patch doesn't do that. PCI device hotplug - Revert duplicate merge (Kamal Mostafa) A mistaken duplicate merge that added a check twice. Nothing's broken; this just removes the unnecessary code. Freescale i.MX6 - Wait for clocks to stabilize after ref_en (Richard Zhu) An i.MX6 clock problem that prevents mx6 nitrogen boards from booting" * tag 'pci-v3.18-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Rename sysfs 'enabled' file back to 'enable' PCI: imx6: Wait for clocks to stabilize after ref_en Revert duplicate "PCI: pciehp: Prevent NULL dereference during probe"
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-25 22:32:23 +0300