| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Making DMA RX polling optional when DMA is on was just
over-cautious: there is one single system in the kernel tree
using this facility, Ux500 and after some testing I turned
this on also for Ux500, which means it should simply be on
by default if DMA is enabled.
Cc: Jongsung Kim <neidhard.kim@lge.com>
Cc: Chanho Min <chanho.min@lge.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert to modern PM ops and use the SIMPLE_DEV_PM_OPS macro to set up
the PM callbacks.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ttyA has ld associated to n_gsm, when ttyA is closing, it triggers
to release gsmttyB's ld data dlci[B], then race would happen if gsmttyB
is opening in parallel.
(Note: This patch set differs from previous set in that it uses mutex
instead of spin lock to avoid race, so that it avoids sleeping in automic
context)
Here are race cases we found recently in test:
CASE #1
====================================================================
releasing dlci[B] race with gsmtty_install(gsmttyB), then panic
in gsmtty_open(gsmttyB), as below:
tty_release(ttyA) tty_open(gsmttyB)
| |
----- gsmtty_install(gsmttyB)
| |
----- gsm_dlci_alloc(gsmttyB) => alloc dlci[B]
tty_ldisc_release(ttyA) -----
| |
gsm_dlci_release(dlci[B]) -----
| |
gsm_dlci_free(dlci[B]) -----
| |
----- gsmtty_open(gsmttyB)
gsmtty_open()
{
struct gsm_dlci *dlci = tty->driver_data; => here it uses dlci[B]
...
}
In gsmtty_open(gsmttyA), it uses dlci[B] which was release, so hit a panic.
=====================================================================
CASE #2
=====================================================================
releasing dlci[0] race with gsmtty_install(gsmttyB), then panic
in gsmtty_open(), as below:
tty_release(ttyA) tty_open(gsmttyB)
| |
----- gsmtty_install(gsmttyB)
| |
----- gsm_dlci_alloc(gsmttyB) => alloc dlci[B]
| |
----- gsmtty_open(gsmttyB) fail
| |
----- tty_release(gsmttyB)
| |
----- gsmtty_close(gsmttyB)
| |
----- gsmtty_detach_dlci(dlci[B])
| |
----- dlci_put(dlci[B])
| |
tty_ldisc_release(ttyA) -----
| |
gsm_dlci_release(dlci[0]) -----
| |
gsm_dlci_free(dlci[0]) -----
| |
----- dlci_put(dlci[0])
In gsmtty_detach_dlci(dlci[B]), it tries to use dlci[0] which was released,
then hit panic.
=====================================================================
IMHO, n_gsm tty operations would refer released ldisc, as long as
gsm_dlci_release() has chance to release ldisc data when some gsmtty operations
are ongoing..
This patch is try to avoid it by:
1) in n_gsm driver, use a global gsm mutex lock to avoid gsm_dlci_release() run in
parallel with gsmtty_install();
2) Increase dlci's ref count in gsmtty_install() instead of in gsmtty_open(), the
purpose is to prevent gsm_dlci_release() releasing dlci after gsmtty_install()
allocats dlci but before gsmtty_open increases dlci's ref count;
3) Decrease dlci's ref count in gsmtty_remove(), a tty framework API, this is the
opposite process of step 2).
Signed-off-by: Chao Bi <chao.bi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allow kernel configuration of max supported ports for
TTY-over-Firewire driver.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The firewire driver can overrun the tty buffers before the
line discipline can throttle the input; up the buffer limit.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is no in-tree user of tty_prepare_flip_string_flags(); remove.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Trim up the memory_used field name to mem_used.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allow driver to configure its maximum flip buffer memory
consumption/limit. This is necessary for very-high speed line
rates (in excess of 10MB/sec) because the flip buffers can
be saturated before the line discipline has a chance to
throttle the input.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Most line disciplines already handle the undocumented NULL flag
ptr in their .receive_buf method; however, several don't.
Document the NULL flag ptr, and correct handling in the
N_MOUSE, N_GSM0710 and N_R394 line disciplines.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Only wakeup the _waiting_ reader, polls and/or writer(s).
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Distinguish if caller is n_tty_poll() or n_tty_read(), and
set the read/wakeup threshold accordingly.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Perform PARMRK doubling checks explicitly; remove ternary idiom
and local variable.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Although n_tty_receive_char_closing() only has one call-site,
let the compiler inline instead.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit e60d27c4d8b33ba20896b76b6558f061bc6460ff,
n_tty: Factor LNEXT processing from per-char i/o path,
mistakenly inlined the non-inline alias, n_tty_receive_char(),
for the inline function, n_tty_receive_char_inline().
As n_tty_receive_char() is intended for slow-path char
processing only, un-inline it.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
N_TTY's direct and flow-controlled flavors of the .receive_buf()
method are nearly identical; fold together.
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This early amba_ports declaration was introduced by commit c16d51a32 (amba
pl011: workaround for uart registers lockup) for use in the pl011_lockup_wa()
routine. This routine was later removed by commit 4fd0690bb (serial: pl011:
implement workaround for CTS clear event issue).
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ACPI now provides stubs for the functions the driver uses.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The uart_set_options() code unconditionally initalizes the spinlock
on the port. This can cause a deadlock in some situations.
One instance that exposed the problem, was when writing to
/sys/module/kgdboc/parameters/kgdboc to use ttyS0 when the console
is already running on ttyS0. If the spinlock is re-initialized
while the lock is held due to output to the console, there
is a deadlock.
Assume the spinlock is initialized if the port is a console.
Signed-off-by: Randy Witt <rewitt@declaratino.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 2167e2399dc5 (cpufreq: fix garbage kobjects on errors during
suspend/resume) breaks suspend/resume on Martin Ziegler's system
(hard lockup during resume), so revert it.
Fixes: 2167e2399dc5 (cpufreq: fix garbage kobjects on errors during suspend/resume)
References: https://bugzilla.kernel.org/show_bug.cgi?id=66751
Reported-by: Martin Ziegler <ziegler@uni-freiburg.de>
Cc: 3.12+ <stable@vger.kernel.org> # 3.12+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 5a87182aa21d (cpufreq: suspend governors on system
suspend/hibernate) causes hibernation problems to happen on
Bjørn Mork's and Paul Bolle's systems, so revert it.
Fixes: 5a87182aa21d (cpufreq: suspend governors on system suspend/hibernate)
Reported-by: Bjørn Mork <bjorn@mork.no>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This patch allows you to atomically remove all rules stored in
a table via the NFT_MSG_DELRULE command. You only need to indicate
the specific table and no chain to flush all rules stored in that
table.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
In (32263dd1b netfilter: xt_hashlimit: fix namespace destroy path)
the hashlimit_net_exit() function is always called right before
hashlimit_mt_destroy() to release netns data. If you use xt_hashlimit
with IPv4 and IPv6 together, this produces the following splat via
netconsole in the netns destroy path:
Pid: 9499, comm: kworker/u:0 Tainted: G WC O 3.2.0-5-netctl-amd64-core2
Call Trace:
[<ffffffff8104708d>] ? warn_slowpath_common+0x78/0x8c
[<ffffffff81047139>] ? warn_slowpath_fmt+0x45/0x4a
[<ffffffff81144a99>] ? remove_proc_entry+0xd8/0x22e
[<ffffffff810ebbaa>] ? kfree+0x5b/0x6c
[<ffffffffa043c501>] ? hashlimit_net_exit+0x45/0x8d [xt_hashlimit]
[<ffffffff8128ab30>] ? ops_exit_list+0x1c/0x44
[<ffffffff8128b28e>] ? cleanup_net+0xf1/0x180
[<ffffffff810369fc>] ? should_resched+0x5/0x23
[<ffffffff8105b8f9>] ? process_one_work+0x161/0x269
[<ffffffff8105aea5>] ? cwq_activate_delayed_work+0x3c/0x48
[<ffffffff8105c8c2>] ? worker_thread+0xc2/0x145
[<ffffffff8105c800>] ? manage_workers.isra.25+0x15b/0x15b
[<ffffffff8105fa01>] ? kthread+0x76/0x7e
[<ffffffff813581f4>] ? kernel_thread_helper+0x4/0x10
[<ffffffff8105f98b>] ? kthread_worker_fn+0x139/0x139
[<ffffffff813581f0>] ? gs_change+0x13/0x13
---[ end trace d8c3cc0ad163ef79 ]---
------------[ cut here ]------------
WARNING: at /usr/src/linux-3.2.52/debian/build/source_netctl/fs/proc/generic.c:849
remove_proc_entry+0x217/0x22e()
Hardware name:
remove_proc_entry: removing non-empty directory 'net/ip6t_hashlimit', leaking at least 'IN-REJECT'
This is due to lack of removal net/ip6t_hashlimit/* entries in
hashlimit_proc_net_exit(), since only IPv4 entries are deleted. Fix
it by always removing the IPv4 and IPv6 entries and their parent
directories in the netns destroy path.
Signed-off-by: Sergey Popovich <popovich_sergei@mail.ru>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a flag to tell the PCI subsystem that kernel is shutting down in
preparation to kexec a kernel. Add code in PCI subsystem to use this flag
to clear Bus Master bit on PCI devices only in case of kexec reboot.
This fixes a power-off problem on Acer Aspire V5-573G and likely other
machines and avoids any other issues caused by clearing Bus Master bit on
PCI devices in normal shutdown path. The problem was introduced by
b566a22c2332 ("PCI: disable Bus Master on PCI device shutdown").
This patch is based on discussion at
http://marc.info/?l=linux-pci&m=138425645204355&w=2
Link: https://bugzilla.kernel.org/show_bug.cgi?id=63861
Reported-by: Chang Liu <cl91tp@gmail.com>
Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: stable@vger.kernel.org # v3.5+
|
|
the 'soc' node in the common .dtsi for MPC5121 has an '#interrupt-cells'
property although this node is not an interrupt controller
remove this erroneously placed property because starting with v3.13-rc1
lookup and resolution of 'interrupts' specs for peripherals gets misled,
emits 'no irq domain found' WARN() messages and breaks the boot process
irq: no irq domain found for /soc@80000000 !
------------[ cut here ]------------
WARNING: at drivers/of/platform.c:171
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Tainted: G W 3.13.0-rc1-00001-g8a66234 #8
task: df823bb0 ti: df834000 task.ti: df834000
NIP: c02b5190 LR: c02b5180 CTR: c01cf4e0
REGS: df835c50 TRAP: 0700 Tainted: G W (3.13.0-rc1-00001-g8a66234)
MSR: 00029032 <EE,ME,IR,DR,RI> CR: 229a9d42 XER: 20000000
GPR00: c02b5180 df835d00 df823bb0 00000000 00000000 df835b18 ffffffff 00000308
GPR08: c0479cc0 c0480000 c0479cc0 00000308 00000308 00000000 c00040fc 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 df850880
GPR24: df84d670 00000000 00000001 df8561a0 dffffccc df85089c 00000020 00000001
NIP [c02b5190] of_device_alloc+0xf4/0x1a0
LR [c02b5180] of_device_alloc+0xe4/0x1a0
Call Trace:
[df835d00] [c02b5180] of_device_alloc+0xe4/0x1a0 (unreliable)
[df835d50] [c02b5278] of_platform_device_create_pdata+0x3c/0xc8
[df835d70] [c02b53fc] of_platform_bus_create+0xf8/0x170
[df835dc0] [c02b5448] of_platform_bus_create+0x144/0x170
[df835e10] [c02b55a8] of_platform_bus_probe+0x98/0xe8
[df835e30] [c0437508] mpc512x_init+0x28/0x1c4
[df835e70] [c0435de8] ppc_init+0x4c/0x60
[df835e80] [c0003b28] do_one_initcall+0x150/0x1a4
[df835ef0] [c0432048] kernel_init_freeable+0x114/0x1c0
[df835f30] [c0004114] kernel_init+0x18/0x124
[df835f40] [c000e910] ret_from_kernel_thread+0x5c/0x64
Instruction dump:
409effd4 57c9103a 57de2834 7c89f050 7f83e378 7c972214 7f45d378 48001f55
7c63d278 7c630034 5463d97e 687a0001 <0f1a0000> 2f990000 387b0010 939b0098
---[ end trace 2257f10e5a20cbdd ]---
...
irq: no irq domain found for /soc@80000000 !
fsl-diu-fb 80002100.display: could not get DIU IRQ
fsl-diu-fb: probe of 80002100.display failed with error -22
irq: no irq domain found for /soc@80000000 !
mpc512x_dma 80014000.dma: Error mapping IRQ!
mpc512x_dma: probe of 80014000.dma failed with error -22
...
irq: no irq domain found for /soc@80000000 !
fs_enet: probe of 80002800.ethernet failed with error -22
...
irq: no irq domain found for /soc@80000000 !
mpc5121-rtc 80000a00.rtc: mpc5121_rtc_probe: could not request irq: 0
mpc5121-rtc: probe of 80000a00.rtc failed with error -22
...
Cc: Anatolij Gustschin <agust@denx.de>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Gerhard Sittig <gsi@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
|
|
Commit 7ce93f3 (ARM: OMAP2+: Fix more missing data for omap3.dtsi file)
fixed missing device tree data for omaps, but did not account for some of the
hardware modules being inaccessible for secure omaps. This causes the
following error on secure omaps:
Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0c5048
SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.13.0-rc2+ #446
task: ce057b40 ti: ce058000 task.ti: ce058000
PC is at omap_aes_dma_stop+0x24/0x3c
LR is at omap_aes_probe+0x1cc/0x584
psr: 60000113
sp : ce059e20 ip : ce0b4ee0 fp : 00000000
r10: c0573ae8 r9 : c0749508 r8 : 00000000
r7 : ce0b4e00 r6 : 00000000 r5 : ce0b4e10 r4 : ce274890
r3 : fa0c5048 r2 : 00000048 r1 : 0000002c r0 : ce274890
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 10c5387d Table: 80004019 DAC: 00000015
Process swapper/0 (pid: 1, stack limit = 0xce058248)
Stack: (0xce059e20 to 0xce05a000)
9e20: c0749508 0000a1ff 00000000 c016cd8c c06b5a06 ce2a45f0 ce2a4570 ce0b5fb0
9e40: 00000000 480c5000 480c504f c0abe4e4 00000200 00000000 00000000 00000000
9e60: ce0b4e10 ce0b4e10 c082da3c c082da3c c02b8c70 c077c610 c0749508 00000000
9e80: 00000000 c02b9e7c c02b9e64 ce0b4e10 00000000 c02b8b20 ce0b4e10 ce0b4e44
9ea0: c082da3c c02b8cd8 00000000 ce059eb8 c082da3c c02b7408 ce079edc ce0b1a34
9ec0: c082da3c c082da3c ce2a0280 00000000 c08158d8 c02b8358 c0663405 c0663405
9ee0: 00000073 c082da3c c079e4e8 c07ab3bc c0844340 c02b9334 00000000 00000006
9f00: c079e4e8 c0008920 c067f6bf c0ac7c6b 00000000 c0712e28 00000000 00000000
9f20: c0712e38 ce059f38 00000093 c0ac7c82 00000000 c0058994 00000000 c07130e8
9f40: c07127b8 00000093 00000006 00000006 00000001 00000006 00000006 c079e4e8
9f60: c07ab3bc c0844340 00000093 c0749508 c079e4f4 c0749c64 00000006 00000006
9f80: c0749508 00000000 00000000 c0517e2c 00000000 00000000 00000000 00000000
9fa0: 00000000 c0517e34 00000000 c000dfb8 00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff
(omap_aes_probe+0x1cc/0x584)
(platform_drv_probe+0x18/0x48)
(driver_probe_device+0xb0/0x200)
(__driver_attach+0x68/0x8c)
(bus_for_each_dev+0x50/0x88)
(bus_add_driver+0xcc/0x1c8)
(driver_register+0x9c/0xe0)
(do_one_initcall+0x98/0x140)
(kernel_init_freeable+0x16c/0x23c)
(kernel_init+0x8/0x100)
(ret_from_fork+0x14/0x3c)
Code: e1811002 e5932020 e590300c e0833002 (e593c000)
Let's fix the issue by adding omap34xx-hs.dtsi and omap36xx-hs.dtsi and make
n900, n9 and n950 to use them. This way we have the aes, sham and timer12
disabled for secure devices the same way legacy booting does based on the
omap34xx_gp_hwmod_ocp_ifs and omap36xx_gp_hwmod_ocp_ifs arrays in
omap_hwmod_3xxx_data.c.
Reported-by: Sebastian Reichel <sre@debian.org>
Acked-By: Sebastian Reichel <sre@debian.org>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
There is an as-yet unexplained bug that sometimes prevents (or delays)
the driver seeing the completion event for a completed MCDI request on
the SFC9120. The requested configuration change will have happened
but the driver assumes it to have failed, and this can result in
further failures. We can mitigate this by polling for completion
after unsuccessfully waiting for an event.
Fixes: 8127d661e77f ('sfc: Add support for Solarflare SFC9100 family')
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
|
|
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
|
|
rx_prefix_size is 4-bytes aligned on Falcon/Siena (16 bytes), but it is equal
to 14 on EF10. So, it should be taken into account if arch requires IP header
to be 4-bytes aligned (via NET_IP_ALIGN).
Fixes: 8127d661e77f ('sfc: Add support for Solarflare SFC9100 family')
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
|
|
There is a single MCDI PTP operation for setting the frequency
adjustment and applying a time offset to the hardware clock. When
applying a time offset we should not change the frequency adjustment.
These two operations can now be requested separately but this requires
a flash firmware update. Keep using the single operation, but
remember and repeat the previous frequency adjustment.
Fixes: 7c236c43b838 ('sfc: Add support for IEEE-1588 PTP')
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
|
|
This disables PTP when we bring the interface down to avoid getting
unmatched RX timestamp events, and tries to re-enable it when bringing
the interface up.
[bwh: Make efx_ptp_stop() safe on Falcon. Introduce
efx_ptp_{start,stop}_datapath() functions; we'll expand them later.]
Fixes: 7c236c43b838 ('sfc: Add support for IEEE-1588 PTP')
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
|
|
In case of a flood of PTP packets, the timestamp peripheral and MC
firmware on the SFN[56]322F boards may not be able to provide
timestamp events for all packets. Don't complain too much about this.
Fixes: 7c236c43b838 ('sfc: Add support for IEEE-1588 PTP')
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
|
|
The am3517 is wrongly booting as omap3 which means that the am3517
specific devices like Ethernet won't work when booted with device
tree. Now with the new devices defined in am3517.dtsi, let's use
that instead of the omap3.dtsi, and add a separate machine entry
for am3517 so am3517-evm can use it.
Signed-off-by: Nishanth Menon <nm@ti.com>
[tony@atomide.com: updated comments and fixed build without omap3]
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
On am3517 there are some extra devices compared to omap3.dtsi that
we currently have not defined. Let's fix that by adding am3517.dtsi
file.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
We have some device tree properties where the ti,hwmod have multiple
values:
am33xx.dtsi: ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
am4372.dtsi: ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
dra7.dtsi: ti,hwmods = "l3_main_1", "l3_main_2";
omap3.dtsi: ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
omap3.dtsi: ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
omap4.dtsi: ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
omap5.dtsi: ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
That's not correct way of doing things in this case because these are
separate devices with their own address space, interrupts, SYSCONFIG
registers and can set their PM states independently.
So they should all be fixed up to be separate devices in the .dts files.
We also have the related data removed for at least omap4 in commit
3b9b10151c68 (ARM: OMAP4: hwmod data: Clean up the data file), so
that data is wrongly initialized as null data.
So we need to fix two bugs:
1. We are only checking the first entry of the ti,hwmods property
This means that we're only initializing the first hwmods entry
instead of the ones listed in the ti,hwmods property.
2. We are only checking the child nodes, not the nodes themselves
This means that anything listed at OCP level is currently just
ignored and unitialized and at least the omap4 case, with the
legacy data missing from the hwmod.
Fix both of the issues by using an index to the ti,hwmods property
and changing the hwmod lookup function to also check the current node
for ti,hwmods property instead of just the children.
While at it, let's also add some warnings for the bad data so it's
easier to fix.
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Limit syslog flood if a PTP packet storm occurs.
Fixes: 7c236c43b838 ('sfc: Add support for IEEE-1588 PTP')
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into for-linus
|
|
When a packet with invalid length arrives, ensure that the packet
is freed correctly if mergeable packet buffers and big packets
(GUEST_TSO4) are both enabled.
Signed-off-by: Michael Dalton <mwdalton@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current code unmaps the DMA mapping created for rx skb_buff's by
using the data_size as the the mapping size. This is wrong since the
correct size to specify should match the size used to create the mapping.
This commit removes the following DMA_API_DEBUG warning:
------------[ cut here ]------------
WARNING: at lib/dma-debug.c:887 check_unmap+0x3a8/0x860()
mvneta d0070000.ethernet: DMA-API: device driver frees DMA memory with different size [device address=0x000000002eb80000] [map size=1600 bytes] [unmap size=66 bytes]
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.21-01444-ga88ae13-dirty #92
[<c0013600>] (unwind_backtrace+0x0/0xf8) from [<c0010fb8>] (show_stack+0x10/0x14)
[<c0010fb8>] (show_stack+0x10/0x14) from [<c001afa0>] (warn_slowpath_common+0x48/0x68)
[<c001afa0>] (warn_slowpath_common+0x48/0x68) from [<c001b01c>] (warn_slowpath_fmt+0x30/0x40)
[<c001b01c>] (warn_slowpath_fmt+0x30/0x40) from [<c018d0fc>] (check_unmap+0x3a8/0x860)
[<c018d0fc>] (check_unmap+0x3a8/0x860) from [<c018d734>] (debug_dma_unmap_page+0x64/0x70)
[<c018d734>] (debug_dma_unmap_page+0x64/0x70) from [<c0233f78>] (mvneta_rx+0xec/0x468)
[<c0233f78>] (mvneta_rx+0xec/0x468) from [<c023436c>] (mvneta_poll+0x78/0x16c)
[<c023436c>] (mvneta_poll+0x78/0x16c) from [<c02db468>] (net_rx_action+0x94/0x160)
[<c02db468>] (net_rx_action+0x94/0x160) from [<c0021e68>] (__do_softirq+0xe8/0x1d0)
[<c0021e68>] (__do_softirq+0xe8/0x1d0) from [<c0021ff8>] (do_softirq+0x4c/0x58)
[<c0021ff8>] (do_softirq+0x4c/0x58) from [<c0022228>] (irq_exit+0x58/0x90)
[<c0022228>] (irq_exit+0x58/0x90) from [<c000e7c8>] (handle_IRQ+0x3c/0x94)
[<c000e7c8>] (handle_IRQ+0x3c/0x94) from [<c0008548>] (armada_370_xp_handle_irq+0x4c/0xb4)
[<c0008548>] (armada_370_xp_handle_irq+0x4c/0xb4) from [<c000dc20>] (__irq_svc+0x40/0x50)
Exception stack(0xc04f1f70 to 0xc04f1fb8)
1f60: c1fe46f8 00000000 00001d92 00001d92
1f80: c04f0000 c04f0000 c04f84a4 c03e081c c05220e7 00000001 c05220e7 c04f0000
1fa0: 00000000 c04f1fb8 c000eaf8 c004c048 60000113 ffffffff
[<c000dc20>] (__irq_svc+0x40/0x50) from [<c004c048>] (cpu_startup_entry+0x54/0x128)
[<c004c048>] (cpu_startup_entry+0x54/0x128) from [<c04c1a14>] (start_kernel+0x29c/0x2f0)
[<c04c1a14>] (start_kernel+0x29c/0x2f0) from [<00008074>] (0x8074)
---[ end trace d4955f6acd178110 ]---
Mapped at:
[<c018d600>] debug_dma_map_page+0x4c/0x11c
[<c0235d6c>] mvneta_setup_rxqs+0x398/0x598
[<c0236084>] mvneta_open+0x40/0x17c
[<c02dbbd4>] __dev_open+0x9c/0x100
[<c02dbe58>] __dev_change_flags+0x7c/0x134
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
br_stp_rcv() is reached by non-rx_handler path. That means there is no
guarantee that dev is bridge port and therefore simple NULL check of
->rx_handler_data is not enough. There is need to check if dev is really
bridge port and since only rcu read lock is held here, do it by checking
->rx_handler pointer.
Note that synchronize_net() in netdev_rx_handler_unregister() ensures
this approach as valid.
Introduced originally by:
commit f350a0a87374418635689471606454abc7beaa3a
"bridge: use rx_handler_data pointer to store net_bridge_port pointer"
Fixed but not in the best way by:
commit b5ed54e94d324f17c97852296d61a143f01b227a
"bridge: fix RCU races with bridge port"
Reintroduced by:
commit 716ec052d2280d511e10e90ad54a86f5b5d4dcc2
"bridge: fix NULL pointer deref of br_port_get_rcu"
Please apply to stable trees as well. Thanks.
RH bugzilla reference: https://bugzilla.redhat.com/show_bug.cgi?id=1025770
Reported-by: Laine Stump <laine@redhat.com>
Debugged-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
efx_ptp_is_ptp_tx() must be robust against skbs from raw sockets that
have invalid IPv4 and UDP headers.
Add checks that:
- the transport header has been found
- there is enough space between network and transport header offset
for an IPv4 header
- there is enough space after the transport header offset for a
UDP header
Fixes: 7c236c43b838 ('sfc: Add support for IEEE-1588 PTP')
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
|
|
free_netdev calls netif_napi_del too, but it's too late, because napi
structures are placed on vi->rq. netif_napi_add() is called from
virtnet_alloc_queues.
general protection fault: 0000 [#1] SMP
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in: ip6table_filter ip6_tables iptable_filter ip_tables virtio_balloon pcspkr virtio_net(-) i2c_pii
CPU: 1 PID: 347 Comm: rmmod Not tainted 3.13.0-rc2+ #171
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
task: ffff8800b779c420 ti: ffff8800379e0000 task.ti: ffff8800379e0000
RIP: 0010:[<ffffffff81322e19>] [<ffffffff81322e19>] __list_del_entry+0x29/0xd0
RSP: 0018:ffff8800379e1dd0 EFLAGS: 00010a83
RAX: 6b6b6b6b6b6b6b6b RBX: ffff8800379c2fd0 RCX: dead000000200200
RDX: 6b6b6b6b6b6b6b6b RSI: 0000000000000001 RDI: ffff8800379c2fd0
RBP: ffff8800379e1dd0 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff8800379c2f90
R13: ffff880037839160 R14: 0000000000000000 R15: 00000000013352f0
FS: 00007f1400e34740(0000) GS:ffff8800bfb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007f464124c763 CR3: 00000000b68cf000 CR4: 00000000000006e0
Stack:
ffff8800379e1df0 ffffffff8155beab 6b6b6b6b6b6b6b2b ffff8800378391c0
ffff8800379e1e18 ffffffff8156499b ffff880037839be0 ffff880037839d20
ffff88003779d3f0 ffff8800379e1e38 ffffffffa003477c ffff88003779d388
Call Trace:
[<ffffffff8155beab>] netif_napi_del+0x1b/0x80
[<ffffffff8156499b>] free_netdev+0x8b/0x110
[<ffffffffa003477c>] virtnet_remove+0x7c/0x90 [virtio_net]
[<ffffffff813ae323>] virtio_dev_remove+0x23/0x80
[<ffffffff813f62ef>] __device_release_driver+0x7f/0xf0
[<ffffffff813f6ca0>] driver_detach+0xc0/0xd0
[<ffffffff813f5f28>] bus_remove_driver+0x58/0xd0
[<ffffffff813f72ec>] driver_unregister+0x2c/0x50
[<ffffffff813ae65e>] unregister_virtio_driver+0xe/0x10
[<ffffffffa0036942>] virtio_net_driver_exit+0x10/0x6ce [virtio_net]
[<ffffffff810d7cf2>] SyS_delete_module+0x172/0x220
[<ffffffff810a732d>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff810f5d4c>] ? __audit_syscall_entry+0x9c/0xf0
[<ffffffff81677f69>] system_call_fastpath+0x16/0x1b
Code: 00 00 55 48 8b 17 48 b9 00 01 10 00 00 00 ad de 48 8b 47 08 48 89 e5 48 39 ca 74 29 48 b9 00 02 20 00 00 00
RIP [<ffffffff81322e19>] __list_del_entry+0x29/0xd0
RSP <ffff8800379e1dd0>
---[ end trace d5931cd3f87c9763 ]---
Fixes: 986a4f4d452d (virtio_net: multiqueue support)
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
free_unused_bufs must check vi->mergeable_rx_bufs before
vi->big_packets, because we use this sequence in other places.
Otherwise we allocate buffer of one type, then free it as another
type.
general protection fault: 0000 [#1] SMP
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in: ip6table_filter ip6_tables iptable_filter ip_tables pcspkr virtio_balloon virtio_net(-) i2c_pii
CPU: 0 PID: 400 Comm: rmmod Not tainted 3.13.0-rc2+ #170
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
task: ffff8800b6d2a210 ti: ffff8800aed32000 task.ti: ffff8800aed32000
RIP: 0010:[<ffffffffa00345f3>] [<ffffffffa00345f3>] free_unused_bufs+0xc3/0x190 [virtio_net]
RSP: 0018:ffff8800aed33dd8 EFLAGS: 00010202
RAX: ffff8800b1fe2c00 RBX: ffff8800b66a7240 RCX: 6b6b6b6b6b6b6b6b
RDX: 6b6b6b6b6b6b6b6b RSI: ffff8800b8419a68 RDI: ffff8800b66a1148
RBP: ffff8800aed33e00 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
R13: ffff8800b66a1148 R14: 0000000000000000 R15: 000077ff80000000
FS: 00007fc4f9c4e740(0000) GS:ffff8800bfa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007f63f432f000 CR3: 00000000b6538000 CR4: 00000000000006f0
Stack:
ffff8800b66a7240 ffff8800b66a7380 ffff8800377bd3f0 0000000000000000
00000000023302f0 ffff8800aed33e18 ffffffffa00346e2 ffff8800b66a7240
ffff8800aed33e38 ffffffffa003474d ffff8800377bd388 ffff8800377bd390
Call Trace:
[<ffffffffa00346e2>] remove_vq_common+0x22/0x40 [virtio_net]
[<ffffffffa003474d>] virtnet_remove+0x4d/0x90 [virtio_net]
[<ffffffff813ae303>] virtio_dev_remove+0x23/0x80
[<ffffffff813f62cf>] __device_release_driver+0x7f/0xf0
[<ffffffff813f6c80>] driver_detach+0xc0/0xd0
[<ffffffff813f5f08>] bus_remove_driver+0x58/0xd0
[<ffffffff813f72cc>] driver_unregister+0x2c/0x50
[<ffffffff813ae63e>] unregister_virtio_driver+0xe/0x10
[<ffffffffa0036852>] virtio_net_driver_exit+0x10/0x7be [virtio_net]
[<ffffffff810d7cf2>] SyS_delete_module+0x172/0x220
[<ffffffff810a732d>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff810f5d4c>] ? __audit_syscall_entry+0x9c/0xf0
[<ffffffff81677f69>] system_call_fastpath+0x16/0x1b
Code: c0 74 55 0f 1f 44 00 00 80 7b 30 00 74 7a 48 8b 50 30 4c 89 e6 48 03 73 20 48 85 d2 0f 84 bb 00 00 00 66 0f
RIP [<ffffffffa00345f3>] free_unused_bufs+0xc3/0x190 [virtio_net]
RSP <ffff8800aed33dd8>
---[ end trace edb570ea923cce9c ]---
Fixes: 2613af0ed18a (virtio_net: migrate mergeable rx buffers to page frag allocators)
Cc: Michael Dalton <mwdalton@google.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There's an issue when showing the value of packets_per_slave due to
using signed integer. The value may be < 0 and thus not put through
reciprocal_value() before showing. This patch makes it use unsigned
integer when showing it.
CC: Andy Gospodarek <andy@greyhouse.net>
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Veaceslav Falico <vfalico@redhat.com>
CC: David S. Miller <davem@davemloft.net>
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Acked-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During suspend-resume and lancer error recovery we will cleanup and
re-initialize the resources through be_clear() and be_setup() respectively.
During re-initialisation in be_setup(), if be_get_config() fails, we'll again
call be_clear() which will cause a NULL pointer dereference as adapter->pmac_id is
already freed.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Firmware update would be detected by looking at the sliport_error1/
sliport_error2 register values(0x02/0x00). If its not a FW reset the current
messaging would take place. If the error is due to FW reset, log a message to
user that "Firmware update in progress" and also do not log sliport_status and
sliport_error register values.
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
