| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"Two netfs fixes for this merge window:
- Ensure that fscache_cookie_lru_time is deleted when the fscache
module is removed to prevent UAF
- Fix filemap_invalidate_inode() to use invalidate_inode_pages2_range()
Before it used truncate_inode_pages_partial() which causes
copy_file_range() to fail on cifs"
* tag 'vfs-6.11-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fscache: delete fscache_cookie_lru_timer when fscache exits to avoid UAF
mm: Fix filemap_invalidate_inode() to use invalidate_inode_pages2_range()
|
|
Pull ARM fix from Russell King:
- Fix a build issue with older binutils with LD dead code elimination
disabled
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9414/1: Fix build issue with LD_DEAD_CODE_DATA_ELIMINATION
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fix from Helge Deller:
- Fix boot issue where boot memory is marked read-only too early
* tag 'parisc-for-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Delay write-protection until mark_rodata_ro() call
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"17 hotfixes, 15 of which are cc:stable.
Mostly MM, no identifiable theme. And a few nilfs2 fixups"
* tag 'mm-hotfixes-stable-2024-09-03-20-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
alloc_tag: fix allocation tag reporting when CONFIG_MODULES=n
mm: vmalloc: optimize vmap_lazy_nr arithmetic when purging each vmap_area
mailmap: update entry for Jan Kuliga
codetag: debug: mark codetags for poisoned page as empty
mm/memcontrol: respect zswap.writeback setting from parent cg too
scripts: fix gfp-translate after ___GFP_*_BITS conversion to an enum
Revert "mm: skip CMA pages when they are not available"
maple_tree: remove rcu_read_lock() from mt_validate()
kexec_file: fix elfcorehdr digest exclusion when CONFIG_CRASH_HOTPLUG=y
mm/slub: add check for s->flags in the alloc_tagging_slab_free_hook
nilfs2: fix state management in error path of log writing function
nilfs2: fix missing cleanup on rollforward recovery error
nilfs2: protect references to superblock parameters exposed in sysfs
userfaultfd: don't BUG_ON() if khugepaged yanks our page table
userfaultfd: fix checks for huge PMDs
mm: vmalloc: ensure vmap_block is initialised before adding to queue
selftests: mm: fix build errors on armhf
|
|
There is a build issue with LD segmentation fault, while
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not enabled, as bellow.
scripts/link-vmlinux.sh: line 49: 3796 Segmentation fault
(core dumped) ${ld} ${ldflags} -o ${output} ${wl}--whole-archive
${objs} ${wl}--no-whole-archive ${wl}--start-group
${libs} ${wl}--end-group ${kallsymso} ${btf_vmlinux_bin_o} ${ldlibs}
The error occurs in older versions of the GNU ld with version earlier
than 2.36. It makes most sense to have a minimum LD version as
a dependency for HAVE_LD_DEAD_CODE_DATA_ELIMINATION and eliminate
the impact of ".reloc .text, R_ARM_NONE, ." when
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not enabled.
Fixes: ed0f94102251 ("ARM: 9404/1: arm32: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION")
Reported-by: Harith George <mail2hgg@gmail.com>
Tested-by: Harith George <mail2hgg@gmail.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Link: https://lore.kernel.org/all/14e9aefb-88d1-4eee-8288-ef15d4a9b059@gmail.com/
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
found on Rockchip RK3568"
Marc Kleine-Budde <mkl@pengutronix.de> says:
This series adds support for the CAN-FD IP core found on the Rockchip
RK3568.
The IP core is a bit complicated and has several documented errata.
The driver is added in several stages, first the base driver including
the RX-path. Then several workarounds for errata and the TX-path, and
finally features like hardware time stamping, loop-back mode and
bus error reporting.
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-0-8ae22bcb27cc@pengutronix.de
[mkl: removed DTS patches]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add support for Bus Error Reporting.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-20-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add support for loopback mode.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-19-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add support for hardware based timestamping.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-18-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The previous commit prepared the TX path to make use of the full
TX-FIFO depth as much as possible. Increase the available TX-FIFO
depth to the hardware maximum of 2.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-17-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
So far the TX-FIFO is only used with a depth of 1, although the
hardware offers a depth of 2.
The workaround for the chips that are affected by erratum 6, i.e. EFF
frames may be send as standard frames, is to re-send the EFF frame.
This means the driver cannot queue the next frame for sending, as long
ad the EFF frame has not been successfully send out.
Introduce rkcanfd_get_effective_tx_free() that returns "0" space in
the TX-FIFO if an EFF frame is pending and the actual free space in
the TX-FIFO otherwise. Then replace rkcanfd_get_tx_free() with
rkcanfd_get_effective_tx_free() everywhere.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-16-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The driver contains workarounds for some of the rk3568v2 errata. Add
ethtool-based statistics ("ethtool -S") to track how often an erratum
workaround was needed.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-15-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
broken {RX,TX}ERRORCNT register
Tests show that sometimes both CAN bus error counters read 0x0, even
if the controller is in warning mode
(RKCANFD_REG_STATE_ERROR_WARNING_STATE in RKCANFD_REG_STATE
set).
To work around this issue, if both error counters read from hardware
are 0x0, use the structure priv->bec, otherwise save the read value in
priv->bec.
In rkcanfd_handle_rx_int_one() decrement the priv->bec.rxerr for
successfully RX'ed CAN frames.
In rkcanfd_handle_tx_done_one() decrement the priv->bec.txerr for
successfully TX'ed CAN frames.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-14-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The rk3568 CAN-FD errata sheet as of Tue 07 Nov 2023 11:25:31 +08:00
says:
| A dominant bit at the third bit of the intermission may cause a
| transmission error.
|
| When sampling the third bit of the intermission as a dominant bit, if
| tx_req is configured to transmit extended frames at this time, the
| extended frame may be sent to the bus in the format of a standard
| frame. The extended frame will be sent as a standard frame and will not
| result in error frames
Turn on "Interframe Spaceing RX Mode" only during TX to work around
erratum 12, according to rock-chip:
| Spaceing RX Mode = 1, the third Bit between frames cannot receive
| and send, and the fourth Bit begins to receive and send.
|
| Spaceing RX Mode = 0, allowing the third Bit between frames to
| receive and send.
Message-ID: <be72939f-0a9e-0608-dfff-7b0096a26eba@rock-chips.com>
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-13-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The rk3568 CAN-FD errata sheet as of Tue 07 Nov 2023 11:25:31 +08:00
says:
| The CAN controller's transmission of extended frames may
| intermittently change into standard frames.
|
| When using the CAN controller to send extended frames, if the
| 'tx_req' is configured as 1 and coincides with the internal
| transmission point, the extended frame will be transmitted onto the
| bus in the format of a standard frame.
To work around Erratum 6, the driver is in self-receiving mode (RXSTX)
and all received CAN frames are passed through rkcanfd_rxstx_filter().
Add a check in rkcanfd_rxstx_filter() whether the received frame
corresponds to the current outgoing frame, but the extended CAN ID has
been mangled to a standard ID. In this case re-send the original CAN
frame.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-12-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The IP core has a TX event FIFO. In other IP cores, this type of FIFO
usually contains the events that a CAN frame has been successfully
sent. However, the IP core on the rk3568v2 the FIFO also holds events
of unsuccessful transmission attempts.
It turned out that the best way to work around this problem is to set
the IP core to self-receive mode (RXSTX), filter out the self-received
frames and insert them into the complete TX path.
Add a pair new functions to check if 2 struct canfd_frame are equal.
The 1st checks if the header of the CAN frames are equal, the 2nd
checks if the data portion are equal:
- rkcanfd_can_frame_header_equal()
- rkcanfd_can_frame_data_equal()
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-11-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Tests on the rk3568v2 and rk3568v3 show that a reduced "baudclk" (e.g.
80MHz, compared to the standard 300MHz) significantly increases the
possibility of incorrect FIFO counters, i.e. erratum 5.
Print an info message if the clock is below the known good value of
300MHz.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-10-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
erratum 5: check for empty FIFO
The rk3568 CAN-FD errata sheet as of Tue 07 Nov 2023 11:25:31 +08:00
says:
| Erratum 5: Counters related to the TXFIFO and RXFIFO exhibit
| abnormal counting behavior.
|
| Due to a bug in the cross-asynchronous logic of the enable signals
| for rx_fifo_cnt and txe_fifo_frame_cnt counters, the counts of these
| two counters become inaccurate. This issue has resulted in the
| inability to use the TXFIFO and RXFIFO functions.
The errata sheet mentioned above states that only the rk3568v2 is
affected by this erratum, but tests with the rk3568v2 and rk3568v3
show that the RX_FIFO_CNT is sometimes too high. This leads to CAN
frames being read from the FIFO, which is then already empty.
Further tests on the rk3568v2 and rk3568v3 show that in this
situation (i.e. empty FIFO) all elements of the FIFO
header (frameinfo, id, ts) contain the same data.
On the rk3568v2 and rk3568v3, this problem only occurs extremely
rarely with the standard clock of 300 MHz, but almost immediately at
80 MHz.
To workaround this problem, check for empty FIFO with
rkcanfd_fifo_header_empty() in rkcanfd_handle_rx_int_one() and exit
early.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-9-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Even the rk3568v3 has some known issues. Document them together with a
reproducer.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-8-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add the support for the rk3568v3 SoC, the CAN-FD IP core has 7
documented errata.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-7-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The errata sheets doesn't say anything about CAN-FD, but tests on the
rk3568v2 and rk3568v3 show that receiving certain CAN-FD frames
triggers an Error Interrupt.
Mark the CAN-FD support as broken.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-6-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add a basic infrastructure for quirks for the 12 documented errata.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-5-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add driver for the Rockchip CAN-FD controller.
The IP core on the rk3568v2 SoC has 12 documented errata. Corrections
for these errata will be added in the upcoming patches.
Since several workarounds are required for the TX path, only add the
base driver that only implements the RX path.
Although the RX path implements CAN-FD support, it's not activated in
ctrlmode_supported, as the IP core in the rk3568v2 has problems with
receiving or sending certain CAN-FD frames.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-4-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Mohsin Bashir says:
====================
eth: Add basic ethtool support for fbnic
This patch series adds basic ethtool support for fbnic. Specifically,
the two patches focus on the following two features respectively:
1: Enable 'ethtool -i <dev>' to provide driver, firmware and bus information.
2: Provide mac group stats.
Changes since v2:
- Fix v1 reference link
- Fix nit
---
v2: https://lore.kernel.org/netdev/20240827205904.1944066-2-mohsin.bashr@gmail.com
v1: https://lore.kernel.org/netdev/20240822184944.3882360-1-mohsin.bashr@gmail.com
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for group stats for mac. The fbnic_set_counter help preserve
the default values for counters which are not touched by the driver.
The 'reset' flag in 'get_eth_mac_stats' allows to choose between
resetting the counter to recent most value or fetching the aggregated
values of the counter.
The 'fbnic_stat_rd64' read 64b stats counters in an atomic fashion using
read-read-read approach. This allows to isolate cases where counter is
moving too fast making accuracy of the counter questionable.
Command: ethtool -S eth0 --groups eth-mac
Example Output:
eth-mac-FramesTransmittedOK: 421644
eth-mac-FramesReceivedOK: 3849708
eth-mac-FrameCheckSequenceErrors: 0
eth-mac-AlignmentErrors: 0
eth-mac-OctetsTransmittedOK: 64799060
eth-mac-FramesLostDueToIntMACXmitError: 0
eth-mac-OctetsReceivedOK: 5134513531
eth-mac-FramesLostDueToIntMACRcvError: 0
eth-mac-MulticastFramesXmittedOK: 568
eth-mac-BroadcastFramesXmittedOK: 454
eth-mac-MulticastFramesReceivedOK: 276106
eth-mac-BroadcastFramesReceivedOK: 26119
eth-mac-FrameTooLongErrors: 0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add ethtool ops support and enable 'get_drvinfo' for fbnic. The driver
provides firmware version information while the driver name and bus
information is provided by ethtool_get_drvinfo().
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the SO_PEEK_OFF selftest for UDP. In this patch, I mainly do
three things:
1. rename tcp_so_peek_off.c
2. adjust for UDP protocol
3. add selftests into it
Suggested-by: Jon Maloy <jmaloy@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Machon says:
====================
net: microchip: add FDMA library and use it for Sparx5
This patch series is the first of a 2-part series, that adds a new
common FDMA library for Microchip switch chips Sparx5 and lan966x. These
chips share the same FDMA engine, and as such will benefit from a
common library with a common implementation. This also has the benefit
of removing a lot open-coded bookkeeping and duplicate code for the two
drivers.
Additionally, upstreaming efforts for a third chip, lan969x, will begin
in the near future. This chip will use the new library too.
In this first series, the FDMA library is introduced and used by the
Sparx5 switch driver.
###################
# Example of use: #
###################
- Initialize the rx and tx fdma structs with values for: number of
DCB's, number of DB's, channel ID, DB size (data buffer size), and
total size of the requested memory. Also provide two callbacks:
nextptr_cb() and dataptr_cb() for getting the nextptr and dataptr.
- Allocate memory using fdma_alloc_phys() or fdma_alloc_coherent().
- Initialize the DCB's with fdma_dcb_init().
- Add new DCB's with fdma_dcb_add().
- Free memory with fdma_free_phys() or fdma_free_coherent().
#####################
# Patch breakdown: #
#####################
Patch #1: introduces library and selects it for Sparx5.
Patch #2: includes the fdma_api.h header and removes old symbols.
Patch #3: replaces old rx and tx variables with equivalent ones from the
fdma struct. Only the variables that can be changed without
breaking traffic is changed in this patch.
Patch #4: uses the library for allocation of rx buffers. This requires
quite a bit of refactoring in this single patch.
Patch #5: uses the library for adding DCB's in the rx path.
Patch #6: uses the library for freeing rx buffers.
Patch #7: uses the library helpers in the rx path.
Patch #8: uses the library for allocation of tx buffers. This requires
quite a bit of refactoring in this single patch.
Patch #9: uses the library for adding DCB's in the tx path.
Patch #10: uses the library helpers in the tx path.
Patch #11: ditches the existing linked list for storing buffer addresses,
and instead uses offsets into contiguous memory.
Patch #12: modifies existing rx and tx functions to be direction
independent.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These direction specific functions can be ditched in favor of a single
function: sparx5_fdma_reload(), which retrieves the channel id from the
fdma struct instead.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the driver uses a linked list for storing the tx buffer
addresses. This requires a good amount of extra bookkeeping code. Ditch
the linked list in favor of tx buffers being in the same contiguous
memory space as the DCB's and the DB's. The FDMA library has a helper
for this - so use that.
The tx buffer addresses are now retrieved as an offset into the FDMA
memory space.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The library has the helper fdma_free_phys() for freeing physical FDMA
memory. Use it in the exit path.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the fdma_dcb_add() function to add DCB's in the tx path. This gets
rid of the open-coding of nextptr and dataptr handling and leaves it to
the library.
Also, make sure the fdma indexes are advanced using: fdma_dcb_advance(),
so that the correct nextptr and dataptr offsets are retrieved.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the two functions: fdma_alloc_phys() and fdma_dcb_init() for tx
buffer allocation and use the new buffers throughout.
In order to replace the old buffers with the new ones, we have to do the
following refactoring:
- use fdma_alloc_phys() and fdma_dcb_init()
- replace the variables: tx->dma, tx->first_entry and tx->curr_entry
with the equivalents from the FDMA struct.
- replace uses of sparx5_db_hw and sparx5_tx_dcb_hw with fdma_db and
fdma_dcb.
- add sparx5_fdma_tx_dataptr_cb callback for obtaining the dataptr.
- Initialize FDMA struct values.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The library provides helpers for a number of DCB and DB operations. Use
these in the rx path.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The library has the helper fdma_free_phys() for freeing physical FDMA
memory. Use it in the exit path.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the fdma_dcb_add() function to add DCB's in the rx path. This gets
rid of the open-coding of nextptr and dataptr handling and leaves it to
the library.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the two functions: fdma_alloc_phys() and fdma_dcb_init() for rx
buffer allocation and use the new buffers throughout.
In order to replace the old buffers with the new ones, we have to do the
following refactoring:
- use fdma_alloc_phys() and fdma_dcb_init()
- replace the variables: rx->dma, rx->dcb_entries and rx->last_entry
with the equivalents from the FDMA struct.
- replace uses of sparx5_db_hw and sparx5_rx_dcb_hw with fdma_db and
fdma_dcb.
- add sparx5_fdma_rx_dataptr_cb callback for obtaining the dataptr.
- Initialize FDMA struct values.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace the old rx and tx variables: channel_id, FDMA_DCB_MAX,
FDMA_RX_DCB_MAX_DBS, FDMA_TX_DCB_MAX_DBS, dcb_index and db_index with
the equivalents from the FDMA rx and tx structs. These variables are not
entangled in any buffer allocation and can therefore be replaced in
advance.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Include and use the new FDMA header, which now provides the required
masks and bit offsets for operating on the DCB's and DB's.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add new FDMA library for interacting with the FDMA engine on Microchip
Sparx5 and lan966x switch chips, in an effort to reduce duplicate code
and provide a common set of symbols and functions.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently napi_disable() gets called during rxq and txq cleanup,
even before napi is enabled and hrtimer is initialized. It causes
kernel panic.
? page_fault_oops+0x136/0x2b0
? page_counter_cancel+0x2e/0x80
? do_user_addr_fault+0x2f2/0x640
? refill_obj_stock+0xc4/0x110
? exc_page_fault+0x71/0x160
? asm_exc_page_fault+0x27/0x30
? __mmdrop+0x10/0x180
? __mmdrop+0xec/0x180
? hrtimer_active+0xd/0x50
hrtimer_try_to_cancel+0x2c/0xf0
hrtimer_cancel+0x15/0x30
napi_disable+0x65/0x90
mana_destroy_rxq+0x4c/0x2f0
mana_create_rxq.isra.0+0x56c/0x6d0
? mana_uncfg_vport+0x50/0x50
mana_alloc_queues+0x21b/0x320
? skb_dequeue+0x5f/0x80
Cc: stable@vger.kernel.org
Fixes: e1b5683ff62e ("net: mana: Move NAPI from EQ to CQ")
Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add documentation for the rockchip rk3568 CAN-FD controller.
Co-developed-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-1-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Create a sentinal value for "invalid device".
This is needed for removing devices that have stripes on them (force
removing, without evacuating); we need a sentinal value for the stripe
pointers to the device being removed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Commit 6b7c5b947c67 ("net: Add be2net driver.") declared be_pci_fnum_get()
and be_cmd_reset() but never implemented. And commit 9fa465c0ce0d ("be2net:
remove code duplication relating to Lancer reset sequence") removed
lancer_test_and_set_rdy_state() but leave declaration.
Commit 76a9e08e33ce ("be2net: cleanup wake-on-lan code") left behind
be_is_wol_supported() declaration.
Commit baaa08d148ac ("be2net: do not call be_set/get_fw_log_level() on
Skyhawk-R") removed be_get_fw_log_level() but leave declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240902113238.557515-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is no caller and implementation in tree.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240902112904.556577-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dev_err_probe()"
This reverts commit bf4d87f884fe8a4b6b61fe4d0e05f293d08df61c because it
introduced dev_err_probe() in non-probe path, which is not desired.
In general, calling dev_err_probe() after successful probe in case of
handling -EPROBE_DEFER error, will set deferred status on the device
already probed. This is however not a problem here now, because
dev_err_probe() in affected places is used for handling errors from
request_firmware(), which does not return -EPROBE_DEFER. Still usage of
dev_err_probe() in such case is not correct, because request_firmware()
could once return -EPROBE_DEFER.
Fixes: bf4d87f884fe ("net: alacritech: Switch to use dev_err_probe()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240902163610.17028-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This update allows listing default firewalld ruleset on Fedora 40 via
tools/net/ynl/cli.py --spec \
Documentation/netlink/specs/nftables.yaml --dump getrule
Default ruleset uses fib, reject and objref expressions which were
missing.
Other missing expressions can be added later.
Improve decoding while at it:
- add bitwise, ct and lookup attributes
- wire up the quota expression
- translate raw verdict codes to a human reable name, e.g.
'code': 4294967293 becomes 'code': 'jump'.
v2: forgot fib addrtype in enum list (Donald Hunter)
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20240902214112.2549-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: MIB counters for MPJ TX + misc improvements
Recently, a few issues have been discovered around the creation of
additional subflows. Without these counters, it was difficult to point
out the reason why some subflows were not created as expected.
In patch 3, all error paths from __mptcp_subflow_connect() are covered,
except the one related to the 'fully established mode', because it can
only happen with the userspace PM, which will propagate the error to the
userspace in this case (ENOTCONN).
These new counters are also verified in the MPTCP Join selftest in patch
6.
While at it, a few other patches are improving the MPTCP path-manager
code ...
- Patch 1: 'flush' related helpers are renamed to avoid confusions
- Patch 2: directly pass known ID and flags to create a new subflow,
i/o getting them later by iterating over all endpoints again
... and the MPJoin selftests:
- Patch 4: reduce the number of positional parameters
- Patch 5: only one line for the 'join' checks, instead of 3
- Patch 7: more explicit check names, instead of sometimes too cryptic
ones: rtx, ptx, ftx, ctx, fclzrx, sum
- Patch 8: specify client/server instead of 'invert' for some checks
not suggesting one specific direction
- Patch 9: mute errors of mptcp_connect when ran in the background
- Patch 10: simplify checksum_tests by using a for-loop
- Patch 11: remove 'define' re-definitions
====================
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-0-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'MPTCP_PM_NAME' is defined in 'linux/mptcp_pm.h', included in
'linux/mptcp.h', no need to re-define it.
'MPTCP_PM_EVENTS' is not defined in 'linux/mptcp.h', but
'MPTCP_PM_EV_GRP_NAME' is, with the same value. We can then use the
latter, and drop the other one.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-11-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The four checksum tests are similar, only one line is different. So
a for-loop can be used to simplify these tests.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-10-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
