summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-04-01drm/amdgpu: Correct unlocked update fence handlingPhilip Yang1-1/+1
To fix two issues with unlocked update fence: 1. vm->last_unlocked store the latest fence without taking refcount. 2. amdgpu_vm_bo_update_mapping returns old fence, not the latest fence. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-01drm/amd/display: Fix pointer dereferenced before checkingHaowen Bai1-1/+1
The pointer edid_buf is dereferencing pointer edid before edid is being null checked. Fix this by assigning edid->raw_edid to edid_buf only if edid is not NULL, otherwise just NULL. Signed-off-by: Haowen Bai <baihaowen@meizu.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-01drm/amd/display: Fix allocate_mst_payload assert on resumeRoman Li1-1/+2
[Why] On resume we do link detection for all non-MST connectors. MST is handled separately. However the condition for telling if connector is on mst branch is not enough for mst hub case. Link detection for mst branch link leads to mst topology reset. That causes assert in dc_link_allocate_mst_payload() [How] Use link type as indicator for mst link. Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-01drm/amd/display: 3.2.179Aric Cyr1-1/+1
- [FW Promotion] Release 0.0.110.0 - Revert FEC check in validation - Update LTTPR UHBR link rate support struct - Add support for USBC connector - Add work around for AUX failure on wake - Clear optc false state when disable otg - Enable power gating before init_pipes - Remove redundant dsc power gating from init_hw - Power down hardware if timer not trigger - Correct Slice reset calculation - Enable 3-plane MPO for DCN31 - Set fec register init value - Remove SW w/a for HDCP 1.4 1A-07 failure based on ECO fix - Create underflow interrupt IRQ type Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-01drm/amd/display: [FW Promotion] Release 0.0.110.0Anthony Koo1-86/+4
- Revert save/restore PANEL_PWRSEQ_REF_DIV2 and other psr phy optimizations Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-01drm/amd/display: Revert FEC check in validationMartin Leung1-4/+0
why and how: causes failure on install on certain machines Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-01drm/amd/display: Update LTTPR UHBR link rate support structMichael Strauss1-1/+1
[WHY] Update field order to match DP2.0 spec SCR Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-01drm/amd/display: Add support for USBC connectorSamson Tam4-3/+12
[Why] Add support for CONNECTOR_ID_USBC Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-01drm/amd/display: Add work around for AUX failure on wake.Jimmy Kizito2-0/+60
[Why] When waking from low-power states, a DP sink may remain unresponsive to AUX transactions. [How] Try to toggle DPCD SET_POWER register repeatedly (up to a maximum timeout value) until DP sink becomes responsive. Reviewed-by: Mustapha Ghaddar <Mustapha.Ghaddar@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-01drm/amd/display: Clear optc false state when disable otgCharlene Liu2-8/+11
[why] when disable optc, need to clear the underflow status as well. Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-01drm/amd/display: Enable power gating before init_pipesRoman Li3-6/+9
[Why] In init_hw() we call init_pipes() before enabling power gating. init_pipes() tries to power gate dsc but it may fail because required force-ons are not released yet. As a result with dsc config the following errors observed on resume: "REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control" "REG_WAIT timeout 1us * 1000 tries - dcn20_dpp_pg_control" "REG_WAIT timeout 1us * 1000 tries - dcn20_hubp_pg_control" [How] Move enable_power_gating_plane() before init_pipes() in init_hw() Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-01drm/amd/display: Remove redundant dsc power gating from init_hwRoman Li1-7/+0
[Why] DSC Power down code has been moved from dcn31_init_hw into init_pipes() Need to remove it from dcn10_init_hw() as well to avoid duplicated action on dcn1.x/2.x [How] Remove DSC power down code from dcn10_init_hw() Fixes: 8fa6f4c5715c ("drm/amd/display: fixed the DSC power off sequence during Driver PnP") Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-01drm/amd/display: Power down hardware if timer not triggerPaul Hsieh1-1/+25
[WHY] In headless systems, if SetMode/Power down timer is not called, hardware will not be powered down causing HW/SW discrepancies. Powering down hardware on SetPowerState to D3 will ensure SW/HW state is accurate. [HOW] If PowerDownThread timer is not trigger but OS call SetPowerState to D3, power down hardware. Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-01drm/amd/display: Correct Slice reset calculationChris Park1-2/+2
[Why] Once DSC slice cannot fit pixel clock, we incorrectly reset min slices to 0 and allow max slice to operate, even when max slice itself cannot fit the pixel clock properly. [How] Change the sequence such that we correctly determine DSC is not possible when both min slices and max slices cannot fit pixel clock per slice. Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Chris Park <Chris.Park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-01drm/amd/display: Enable 3-plane MPO for DCN31Krunoslav Kovac1-3/+3
[WHY&HOW] It can be enabled by users, but proper way is to report max_slave_planes in DC caps for each ASIC. Some structures use hardcoded max_plane=2, this is also addressed here. Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-01drm/amd/display: Set fec register init valueJingwen Zhu3-16/+22
[Why] We don't include this eDP FEC init on fastboot. [How] Set the fec to init value when stopping driver &get the fec register value to check should enable FEC. Co-authored-by: Jingwen Zhu <Jingwen.Zhu@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Jingwen Zhu <Jingwen.Zhu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-01drm/amd/display: Remove SW w/a for HDCP 1.4 1A-07 failure based on ECO fixOliver Logush2-4/+2
[why] W/a no longer needed Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Oliver Logush <oliver.logush@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-01drm/amd/display: Create underflow interrupt IRQ typeAngus Wang1-0/+1
[WHY] We want another entry in IRQ type that can be used to help find the underflow interrupt source. [HOW] Added another mapping in IRQ type enum. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Angus Wang <Angus.Wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-28drm/amdgpu/jpeg: Add jpeg ras error query supportMohammad Zafar Ziya2-0/+81
RAS error query support addition for JPEG 2.6 V2: removed unused options and corrected comment format. Moved register definition to header file. V3: poison query status check added. Removed the error query support V4: Return statement refactored. Signed-off-by: Mohammad Zafar Ziya <Mohammadzafar.ziya@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-28drm/amdgpu/vcn: Add VCN ras error query supportMohammad Zafar Ziya3-0/+78
RAS error query support addition for VCN 2.6 V2: removed unused option and corrected comment format Moved the register definition under header file V3: poison query status check added. Removed error query interface V4: MMSCH poison check option removed, return true/false refactored. Signed-off-by: Mohammad Zafar Ziya <Mohammadzafar.ziya@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-28drm/amdgpu/vcn: Add vcn and jpeg ver 2.6 ras register definitionMohammad Zafar Ziya2-0/+37
Adding vcn and jpeg ver 2.6 ras register definition Signed-off-by: Mohammad Zafar Ziya <Mohammadzafar.ziya@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-28drm/amdgpu/jpeg: Add jpeg block ras supportMohammad Zafar Ziya1-0/+8
Ras support addition for JPEG block V2: removed default callback Signed-off-by: Mohammad Zafar Ziya <Mohammadzafar.ziya@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-28drm/amdgpu/vcn: Add vcn ras supportMohammad Zafar Ziya1-0/+9
VCN block ras feature support addition V2: default ras callback removed Signed-off-by: Mohammad Zafar Ziya <Mohammadzafar.ziya@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-28drm/amdgpu: Add vcn and jpeg ras support flagMohammad Zafar Ziya2-0/+11
Add vcn and jpeg ras support options V2: vcn and jpeg ras flag enabled for aldebaran asic only V3: vcn and jpeg ras flag disabled for error counter query Generic poison query interface added VCN and JPEG ras enabled based on IP version check V4: vcn and jpeg ras flag moved under ecc flag for dGPU Signed-off-by: Mohammad Zafar Ziya <Mohammadzafar.ziya@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-28drm/amd/vcn: fix an error msg on vcn 3.0tiancyin1-1/+1
Some video card has more than one vcn instance, passing 0 to vcn_v3_0_pause_dpg_mode is incorrect. Error msg: Register(1) [mmUVD_POWER_STATUS] failed to reach value 0x00000001 != 0x00000002 Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: tiancyin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-28drm/amdgpu: Re-classify some log messages in commit pathSean Paul2-6/+7
ATOMIC and DRIVER log categories do not typically contain per-frame log messages. This patch re-classifies some messages in amd to chattier categories to keep ATOMIC/DRIVER quiet. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-28drm/amd/pm: Check feature support using IP versionLijo Lazar1-33/+40
Instead of ASIC type, use GC and MP1 IP versions for feature support checks. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Kevin Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-28drm/amdgpu/vcn3: send smu interface typeBoyuan Zhang2-0/+12
For VCN FW to detect ASIC type, in order to use different mailbox registers. V2: simplify codes and fix format issue. Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Acked-by Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-28amdgpu/pm: Implement emit_clk_levels for vega10Darren Powell1-0/+147
(v1) - implement emit_clk_levels for vega10, based on print_clk_levels, but using sysfs_emit rather than sprintf - modify local int vars to use uint32_t to match arg type of called functions - add return of error codes - refactor OD_XXX cases to return early with -EOPNOTSUPP if !(hwmgr->od_enabled) Signed-off-by: Darren Powell <darren.powell@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-28amdgpu/pm: Add new hwmgr API function "emit_clock_levels"Darren Powell2-0/+19
Extend commit 7f36948c92b2 ("amdgpu/pm: Implement new API function "emit" that accepts buffer base and write offset") Add new hwmgr API function "emit_clock_levels" - add member emit_clock_levels to pp_hwmgr_func - Implemented pp_dpm_emit_clock_levels - add pp_dpm_emit_clock_levels to pp_dpm_funcs Signed-off-by: Darren Powell <darren.powell@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amdgpu: remove table_freed param from the VM codeChristian König6-24/+16
Better to leave the decision when to flush the VM changes in the TLB to the VM code. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Philip Yang<Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amdkfd: use tlb_seq from the VM subsystem for SVM as well v2Christian König5-29/+22
Instead of hand rolling the table_freed parameter. v2: add some changes suggested by Philip Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Philip Yang<Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amdkfd: start using tlb_seq from the VM subsystemChristian König2-0/+8
Instead of trying to figure out if a TLB flush is necessary or not use the information provided by the VM subsystem now. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Philip Yang<Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amdgpu: rework TLB flushingChristian König6-32/+76
Instead of tracking the VM updates through the dependencies just use a sequence counter for page table updates which indicates the need to flush the TLB. This reduces the need to flush the TLB drastically. v2: squash in NULL check fix (Christian) Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amdgpu: simplify VM update tracking a bitChristian König4-37/+16
Store the 64bit sequence directly. Makes it simpler to use and saves a bit of fence reference counting overhead. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amdgpu: separate VM PT handling into amdgpu_vm_pt.cChristian König4-944/+1006
Separate the VM page table backend operations from the state machine since the amdgpu_vm.c file is becoming to complex. The allocating, freeing and updating page tables and page directories can easily be moved into a separate file. While at it cleanup everything checkpatch.pl reported and rename the functions a bit to make more clear that they belong together. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amdgpu: move VM PDEs to idle after updateChristian König1-32/+10
Move the page tables to the idle list after updating the PDEs. We have gone back and forth with that a couple of times because of problems with the inter PD dependencies, but it should work now that we have the state handling cleanly separated. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amd/display: move FPU related code from dcn316 to dml/dcn31 folderMelissa Wen5-256/+235
Moves FPU-related structs and dcn316_update_bw_bounding_box from dcn316 driver to dml/dcn31 that centralize FPU operations for DCN 3.1x Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amd/display: move FPU related code from dcn315 to dml/dcn31 folderMelissa Wen5-257/+235
Moves related structs and dcn315_update_bw_bounding_box from dcn315 driver code to dml/dcn31_fpu that centralizes FPU code for DCN 3.1x. Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folderMelissa Wen6-381/+451
Creates FPU files in dml/dcn31 folder to centralize FPU operations from 3.1x drivers and moves all FPU-associated code from dcn31 driver to there. It includes the struct _vcs_dpi_ip_params_st and _vcs_dpi_soc_bounding_box_st and functions: - dcn31_calculate_wm_and_dlg_fp() - dcn31_update_bw_bounding_box() adding dc_assert_fp_enabled to them and drop DC_FP_START/END inside functions that was moved to dml folder, as required. Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amd/display: 3.2.178Aric Cyr1-1/+1
This version brings along following fixes: - HDCP SEND AKI INIT error - fix audio format not updated after edid updated - Reduce stack size - FEC check in timing validation - Add fSMC_MSG_SetDtbClk support - Update VTEM Infopacket definition - [FW Promotion] Release 0.0.109.0 Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amd/display: [FW Promotion] Release 0.0.109.0Anthony Koo1-2/+2
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amdkfd: print unmap queue status for RAS poison consumption (v3)Tao Zhou1-4/+9
Print the status out when it passes, and also tell user gpu reset is triggered when we fall back to legacy way. v2: make the message more explicit. v3: change succeeds to succeeded. replace pr_warn with dev_warn. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amd/display: Fix HDCP SEND AKI INIT errorAhmad Othman3-2/+46
[why] HDCP sends AKI INIT error in case of multiple display on dock [how] Add new checks and method to handle display adjustment for multiple display cases Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ahmad Othman <ahmad.othman@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amdgpu: drop redundant check of harvest infoGuchun Chen1-7/+0
Harvest bit setting in IP data structure promises this, so no need to set it explicitly. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amdgpu: Fix spelling mistake "regiser" -> "register"Colin Ian King1-1/+1
There is a spelling mistake in a dev_error error message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amdkfd: add RAS poison consumption handling for UTCL2 (v2)Tao Zhou1-0/+6
Do RAS page retirement and use gpu reset as fallback in UTCL2 fault handler. v2: replace vm fault event with posion consumed event in UTCL2 poison consumption. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amdgpu: add UTCL2 RAS poison query for Aldebaran (v2)Tao Zhou4-0/+24
Add help functions to query and reset RAS UTCL2 poison status. v2: implement it on amdgpu side and kfd only calls it. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amdkfd: replace source_id with client_id for RAS poison consumptionTao Zhou1-7/+16
Client ID is more accruate here and we can deal with more different cases with client ID. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amdkfd: refine event_interrupt_poison_consumptionTao Zhou1-6/+5
Combine reading and setting poison flag as one atomic operation and add print message for the function. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 09:13:59 +0300