summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-09-27wlcore: make Tx flush timings more verboseArik Nemtsov1-4/+9
Print how much time a flush took. This will help debug the time it takes to switch between channels. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: allow only the lowest OFDM rate for p2p setup framesArik Nemtsov1-2/+1
The IEEE80211_TX_CTL_NO_CCK_RATE flag is only set for mgmt packets transmitted during p2p connection setup. Make sure to use the lowest OFDM rate guarantee the peer always hears us. Change the p2p rate policy to contain only the 6mpbs rate to acheive this effect. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: AP mode - send non-data packets with basic ratesArik Nemtsov1-2/+6
This solves interoperability issues with peer that don't seem to "hear" management packets transmitted in higher rates. Based on a previous patch by Igal Chernobelsky. Cc: Igal Chernobelsky <igalc@ti.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: cancel recovery_work on stop() instead of remove_interface()Eliad Peller1-4/+2
recovery_work should be cancelled when stopping the device, not when removing an interface (this is probably a leftover from the single-role days) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wl18xx: increase rx_ba_win_size to 32Ido Reis1-1/+1
The new FWs support a bigger BA window. Signed-off-by: Ido Reis <idor@ti.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: Prevent interaction with HW after recovery is queuedIdo Yariv11-55/+61
When a function requests to recover, it would normally abort and will not send any additional commands to the HW. However, other threads may not be aware of the failure and could try to communicate with the HW after a recovery was queued, but before the recovery work began. Fix this by introducing an intermediate state which is set when recovery is queued, and modify all state checks accordingly. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: consider single fw caseEliad Peller1-1/+5
When a single fw is being used for both single-role and multi-role cases (e.g. 18xx), wl->mr_fw_name is NULL, which results in NULL dereference while trying to load the multi-role fw. In this case, always use the single-role fw, and avoid redundant fw switch by checking for this case in wl12xx_need_fw_change() as well. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wl18xx: update default phy configuration for pg2Ido Reis1-14/+3
default switch configuration set to pg2 chips (rdl 1/2/3/4). removed hacks for specific board types. pg1.x boards are now supported only using module params or specific conf files. Signed-off-by: Ido Reis <idor@ti.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wl12xx: remove duplicated include from main.cWei Yongjun1-1/+0
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wlcore: Declare MODULE_FIRMWARE usageTim Gardner1-0/+1
Declare any firmware that might be used by this driver. If all drivers declare their firmware usage, then a sufficiently complete list of firmware files can then be used to pare down the external linux-firmware package to just the files in actual use. Cc: Luciano Coelho <coelho@ti.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27wl12xx: use module_platform_driverLuciano Coelho1-11/+1
Use a module_platform_driver declaration instead of replicating the init and exit functions in the driver. Based on the patch for wl18xx by Devendra Naga. Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27NFC: Fix sleeping in atomic when releasing socketSzymon Janc1-5/+5
nfc_llcp_socket_release is calling lock_sock/release_sock while holding write lock for rwlock. Use bh_lock/unlock_sock instead. BUG: sleeping function called from invalid context at net/core/sock.c:2138 in_atomic(): 1, irqs_disabled(): 0, pid: 56, name: kworker/1:1 4 locks held by kworker/1:1/56: Pid: 56, comm: kworker/1:1 Not tainted 3.5.0-999-nfc+ #7 Call Trace: [<ffffffff810952c5>] __might_sleep+0x145/0x200 [<ffffffff815d7686>] lock_sock_nested+0x36/0xa0 [<ffffffff81731569>] ? _raw_write_lock+0x49/0x50 [<ffffffffa04aa100>] ? nfc_llcp_socket_release+0x30/0x200 [nfc] [<ffffffffa04aa122>] nfc_llcp_socket_release+0x52/0x200 [nfc] [<ffffffffa04ab9f0>] nfc_llcp_mac_is_down+0x20/0x30 [nfc] [<ffffffffa04a6fea>] nfc_dep_link_down+0xaa/0xf0 [nfc] [<ffffffffa04a9bb5>] nfc_llcp_timeout_work+0x15/0x20 [nfc] [<ffffffff810825f7>] process_one_work+0x197/0x7c0 [<ffffffff81082596>] ? process_one_work+0x136/0x7c0 [<ffffffff8172fbc9>] ? __schedule+0x419/0x9c0 [<ffffffffa04a9ba0>] ? nfc_llcp_build_gb+0x1b0/0x1b0 [nfc] [<ffffffff81083090>] worker_thread+0x190/0x4c0 [<ffffffff81082f00>] ? rescuer_thread+0x2a0/0x2a0 [<ffffffff81088d1e>] kthread+0xae/0xc0 [<ffffffff810caafd>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8173acc4>] kernel_thread_helper+0x4/0x10 [<ffffffff81732174>] ? retint_restore_args+0x13/0x13 [<ffffffff81088c70>] ? flush_kthread_worker+0x150/0x150 [<ffffffff8173acc0>] ? gs_change+0x13/0x13 Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-27NFC: Fix sleeping in invalid context when netlink socket is closedSzymon Janc1-7/+39
netlink_register_notifier requires notify functions to not sleep. nfc_stop_poll locks device mutex and must not be called from notifier. Create workqueue that will handle this for all devices. BUG: sleeping function called from invalid context at kernel/mutex.c:269 in_atomic(): 0, irqs_disabled(): 0, pid: 4497, name: neard 1 lock held by neard/4497: Pid: 4497, comm: neard Not tainted 3.5.0-999-nfc+ #5 Call Trace: [<ffffffff810952c5>] __might_sleep+0x145/0x200 [<ffffffff81743dde>] mutex_lock_nested+0x2e/0x50 [<ffffffff816ffd19>] nfc_stop_poll+0x39/0xb0 [<ffffffff81700a17>] nfc_genl_rcv_nl_event+0x77/0xc0 [<ffffffff8174aa8c>] notifier_call_chain+0x5c/0x120 [<ffffffff8174abd6>] __atomic_notifier_call_chain+0x86/0x140 [<ffffffff8174ab50>] ? notifier_call_chain+0x120/0x120 [<ffffffff815e1347>] ? skb_dequeue+0x67/0x90 [<ffffffff8174aca6>] atomic_notifier_call_chain+0x16/0x20 [<ffffffff8162119a>] netlink_release+0x24a/0x280 [<ffffffff815d7aa8>] sock_release+0x28/0xa0 [<ffffffff815d7be7>] sock_close+0x17/0x30 [<ffffffff811b2a7c>] __fput+0xcc/0x250 [<ffffffff811b2c0e>] ____fput+0xe/0x10 [<ffffffff81085009>] task_work_run+0x69/0x90 [<ffffffff8101b951>] do_notify_resume+0x81/0xd0 [<ffffffff8174ef22>] int_signal+0x12/0x17 Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-27NFC: Add dummy nfc_llc_shdlc_register definitionJohn W. Linville1-0/+8
This is used when CONFIG_NFC_SHDLC is disabled. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-27NFC: LLCP raw socket supportThierry Escande5-4/+148
This adds support for socket of type SOCK_RAW to LLCP. sk_buff are copied and sent to raw sockets with a 2 bytes extra header: The first byte header contains the nfc adapter index. The second one contains flags: - 0x01 - Direction (0=RX, 1=TX) - 0x02-0x80 - Reserved A raw socket has to be explicitly bound to a nfc adapter. This is achieved by specifying the adapter index to be bound to in the dev_idx field of the sockaddr_nfc_llcp struct passed to bind(). Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-27NFC: Fix missing mutex unlock in pn533_send_cmd_frame_asyncSzymon Janc1-7/+8
If command allocation failed cmd_lock was not released and deadlock would occur. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-27NFC: Use dynamic initialization for rwlocksSzymon Janc1-2/+2
If rwlock is dynamically allocated but statically initialized it is missing proper lockdep annotation. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 3352, comm: neard Not tainted 3.5.0-999-nfc+ #2 Call Trace: [<ffffffff810c8526>] __lock_acquire+0x8f6/0x1bf0 [<ffffffff81739045>] ? printk+0x4d/0x4f [<ffffffff810c9eed>] lock_acquire+0x9d/0x220 [<ffffffff81702bfe>] ? nfc_llcp_sock_from_sn+0x4e/0x160 [<ffffffff81746724>] _raw_read_lock+0x44/0x60 [<ffffffff81702bfe>] ? nfc_llcp_sock_from_sn+0x4e/0x160 [<ffffffff81702bfe>] nfc_llcp_sock_from_sn+0x4e/0x160 [<ffffffff817034a7>] nfc_llcp_get_sdp_ssap+0xa7/0x1b0 [<ffffffff81706353>] llcp_sock_bind+0x173/0x210 [<ffffffff815d9c94>] sys_bind+0xe4/0x100 [<ffffffff8139209e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8174ea69>] system_call_fastpath+0x16/0x1b Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-27wl18xx: use module_platform_driverDevendra Naga1-12/+1
the driver's init and exit routines can be implemented with the module_platform_driver, as the init and exit code is same as that of the module_platform_driver Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: Luciano Coelho <luca@coelho.fi>
2012-09-27sparc64: Fix return value of Niagara-2 memcpy.David S. Miller1-23/+23
It gets clobbered by the kernel's VISEntryHalf, so we have to save it in a different register than the set clobbered by that macro. The instance in glibc is OK and doesn't have this problem. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie2-2/+4
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes Another spurious dmesg quitening. * 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nvc0/fifo: ignore bits in PFIFO_INTR that aren't set in PFIFO_INTR_EN
2012-09-27sparc64: Add SPARC-T4 optimized memcpy.David S. Miller8-2/+546
Before After -------------- -------------- bw_tcp: 1288.53 MB/sec 1637.77 MB/sec bw_pipe: 1517.18 MB/sec 2107.61 MB/sec bw_unix: 1838.38 MB/sec 2640.91 MB/sec make -s -j128 allmodconfig 5min 49sec 5min 31sec Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27Merge branch 'rcu/idle' of ↵Ingo Molnar17-79/+407
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull the RCU adaptive-idle feature from Paul E. McKenney: "This series adds RCU APIs that allow non-idle tasks to enter RCU idle mode and provides x86 code to make use of them, allowing RCU to treat user-mode execution as an extended quiescent state when the new RCU_USER_QS kernel configuration parameter is specified. Work is in progress to port this to a few other architectures, but is not part of this series." Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-27perf/x86: Fix typo in uncore_pmu_to_boxYan, Zheng1-1/+1
The variable box should not be declared as static. This could probably cause crashes with sufficiently parallel uncore PMU use. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Cc: eranian@google.com Cc: a.p.zijlstra@chello.nl Link: http://lkml.kernel.org/r/1348709606-2759-1-git-send-email-zheng.z.yan@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-27CIFS: Fix possible freed pointer dereference in CIFS_SessSetupPavel Shilovsky1-1/+2
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-27CIFS: Fix possible freed pointer dereference in SMB2_sess_setupPavel Shilovsky1-32/+3
and remove redundant (rsp == NULL) checks after SendReceive2. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-27CIFS: Make ops->close return voidPavel Shilovsky4-8/+8
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-27md/raid10: fix "enough" function for detecting if array is failed.NeilBrown1-3/+5
The 'enough' function is written to work with 'near' arrays only in that is implicitly assumes that the offset from one 'group' of devices to the next is the same as the number of copies. In reality it is the number of 'near' copies. So change it to make this number explicit. This bug makes it possible to run arrays without enough drives present, which is dangerous. It is appropriate for an -stable kernel, but will almost certainly need to be modified for some of them. Cc: stable@vger.kernel.org Reported-by: Jakub Husák <jakub@gooseman.cz> Signed-off-by: NeilBrown <neilb@suse.de>
2012-09-27coredump: prevent double-free on an error path in core dumperDenys Vlasenko1-15/+4
In !CORE_DUMP_USE_REGSET case, if elf_note_info_init fails to allocate memory for info->fields, it frees already allocated stuff and returns error to its caller, fill_note_info. Which in turn returns error to its caller, elf_core_dump. Which jumps to cleanup label and calls free_note_info, which will happily try to free all info->fields again. BOOM. This is the fix. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Cc: Venu Byravarasu <vbyravarasu@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2012-09-27usb/gadget: fix misannotationsAl Viro1-2/+2
__user * != * __user Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27fcntl: fix misannotationsAl Viro1-3/+3
__user * != * __user... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27ceph: don't abuse d_delete() on failure exitsAl Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27hypfs: ->d_parent is never NULL or negativeAl Viro1-2/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27vfs: delete surplus inode NULL checkAlan Cox1-1/+1
Each iteration of d_delete we reload inode from dentry->d_inode and then call S_ISDIR(inode-i_mode), so inode cannot possibly be NULL shortly afterwards unless something went horribly wrong. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27switch simple cases of fget_light to fdgetAl Viro44-763/+633
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27new helpers: fdget()/fdput()Al Viro1-0/+26
Signed-off-bs: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27switch o2hb_region_dev_write() to fget_light()Al Viro1-2/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27proc_map_files_readdir(): don't bother with grabbing filesAl Viro1-19/+9
all we need is their ->f_mode, so just collect _that_ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27make get_file() return its argumentAl Viro16-38/+23
simplifies a bunch of callers... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27vhost_set_vring(): turn pollstart/pollstop into boolAl Viro1-4/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27switch prctl_set_mm_exe_file() to fget_light()Al Viro1-4/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27switch xfs_find_handle() to fget_light()Al Viro1-3/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27switch xfs_swapext() to fget_light()Al Viro1-5/+5
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27switch coda get_device_index() to fget_light()Al Viro1-17/+15
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27switch infinibarf users of fget() to fget_light()Al Viro3-14/+10
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27switch vfio_group_set_container() to fget_light()Al Viro1-4/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27switch btrfs_ioctl_clone() to fget_light()Al Viro1-3/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27switch mqueue syscalls to fget_light()Al Viro1-12/+14
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27switch SNDRV_PCM_IOCTL_LINK to fget_light()Al Viro1-6/+7
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27switch timerfd_[sg]ettime(2) to fget_light()Al Viro1-8/+9
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-27switch epoll_wait(2) to fget_light()Al Viro1-3/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>