summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-08-05ARM: dts: dra7: Remove ctrl_core and ctrl_general nodesRoger Quadros1-10/+0
These nodes are wrongly placed. They must come under the scm node. Nobody uses them either so get rid of them. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-05Merge tag 'mvebu-dt-4.3-2' of git://git.infradead.org/linux-mvebu into next/dtOlof Johansson2-0/+274
mvebu dt changes for v4.3 (part #2) Add support Buffalo Linkstation LS-WTGL * tag 'mvebu-dt-4.3-2' of git://git.infradead.org/linux-mvebu: ARM: dts: orion5x: add buffalo linkstation ls-wtgl Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-05Merge tag 'zynq-dt-for-4.3' of https://github.com/Xilinx/linux-xlnx into next/dtOlof Johansson3-1/+34
arm: Xilinx Zynq dt patches for v4.3 - Add ECC for Synopsys MC - Add OCM, pushbuttons to zc702 * tag 'zynq-dt-for-4.3' of https://github.com/Xilinx/linux-xlnx: ARM: zynq: DT: Add zc702 pushbuttons to DT as gpio-keys ARM: zynq: DT: Add missing interrupt for L2 pl310 Documentation: devicetree: Add ECC information to synopsys ddr controller ARM: dts: zynq: Add OCM node Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-05Merge tag 'qcom-dt-for-4.3' of git://codeaurora.org/quic/kernel/agross-msm ↵Olof Johansson7-22/+523
into next/dt Qualcomm ARM Based Device Tree Updates for v4.3 * Switch to use pinctrl compatible for GPIOs * Add RPM regulators for MSM8960 * Add SPI Ethernet support on MSM8960 CDP * Add SMEM support along with dependencies * Add PM8921 support for GPIO and MPP * Fix GSBI cell index * Switch to use real regulators on APQ8064 w/ SDCC * tag 'qcom-dt-for-4.3' of git://codeaurora.org/quic/kernel/agross-msm: ARM: dts: qs600: Add real regulators to sdcc ARM: dts: ifc6410: add real regulators for sdcc nodes. ARM: dts: apq8064: remove temporary fixed regulator for mmc ARM: dts: apq8064: fix missing gsbi cell-index ARM: dts: apq8064: Add DT support for GSBI6 and for UART pin mux ARM: dts: apq8064: add pm8921 mpp support ARM: dts: apq8064: Add pm8921 mfd and its gpio node ARM: dts: msm8974: Add smem reservation and node ARM: dts: msm8974: Add tcsr mutex node ARM: dts: qcom: Add ks8851 node for wired ethernet ARM: dts: qcom: Add MSM8960 CDP RPM regulators ARM: dts: qcom: Add MSM8960 RPM and RPM regulator nodes ARM: dts: qcom: Replace gpio node with pinctrl node ARM: dts: qcom: Replace gpio node with pinctrl node Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-05Merge tag 'at91-dt' of ↵Olof Johansson9-31/+1157
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt First batch of DT changes for 4.3: - some fixes on sama5d4 ADC definition - adding Image Sensor Interface (aka ISI) on at91sam9m10g45ek board - update rst controller compatible string on sama5 machines - new sama5d2 DT definition and its reference board: the sama5d2 Xplained. Minimal configuration for now. * tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91/dt: add minimal sama5d2 Xplained board ARM: at91/dt: add basic dtsi for sama5d2 SoC ARM: at91/dt: sama5: update rstc to correct compatible string ARM: at91/dt: add isi & ov2640 dt nodes for at91sam9m10g45ek board ARM: at91/dt: sama5d4: move ADC pinctrl to board device trees ARM: at91/dt: sama5d4: fix external trigger property Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-05ARM: shmobile: sh73a0 dtsi: Add missing "gpio-ranges" to gpio nodeGeert Uytterhoeven1-0/+3
If a GPIO driver uses gpiochip_add_pin_range() (which is usually the case for GPIO/PFC combos), the GPIO hogging mechanism configured from DT doesn't work: requesting hog GPIO led1-high (chip sh73a0_pfc, offset 20) failed The actual error code is -517 == -EPROBE_DEFER. The problem is that PFC+GPIO registration is handled in multiple steps: 1. pinctrl_register(), 2. gpiochip_add(), 3. gpiochip_add_pin_range(). Configuration of the hogs is handled in gpiochip_add(): gpiochip_add of_gpiochip_add of_gpiochip_scan_hogs gpiod_hog gpiochip_request_own_desc __gpiod_request chip->request pinctrl_request_gpio pinctrl_get_device_gpio_range However, at this point the GPIO controller hasn't been added to pinctrldev_list yet, so the range can't be found, and the operation fails with -EPROBE_DEFER. To fix this, add a "gpio-ranges" property to the gpio device node, so the ranges are added by of_gpiochip_add_pin_range(), which is called by of_gpiochip_add() before the call to of_gpiochip_scan_hogs(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-05ARM: shmobile: r8a7740 dtsi: Add missing "gpio-ranges" to gpio nodeGeert Uytterhoeven1-0/+1
If a GPIO driver uses gpiochip_add_pin_range() (which is usually the case for GPIO/PFC combos), the GPIO hogging mechanism configured from DT doesn't work: requesting hog GPIO lcd0 (chip r8a7740_pfc, offset 176) failed The actual error code is -517 == -EPROBE_DEFER. The problem is that PFC+GPIO registration is handled in multiple steps: 1. pinctrl_register(), 2. gpiochip_add(), 3. gpiochip_add_pin_range(). Configuration of the hogs is handled in gpiochip_add(): gpiochip_add of_gpiochip_add of_gpiochip_scan_hogs gpiod_hog gpiochip_request_own_desc __gpiod_request chip->request pinctrl_request_gpio pinctrl_get_device_gpio_range However, at this point the GPIO controller hasn't been added to pinctrldev_list yet, so the range can't be found, and the operation fails with -EPROBE_DEFER. To fix this, add a "gpio-ranges" property to the gpio device node, so the range is added by of_gpiochip_add_pin_range(), which is called by of_gpiochip_add() before the call to of_gpiochip_scan_hogs(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-05ARM: shmobile: r8a73a4 dtsi: Add missing "gpio-ranges" to gpio nodeGeert Uytterhoeven1-0/+7
If a GPIO driver uses gpiochip_add_pin_range() (which is usually the case for GPIO/PFC combos), the GPIO hogging mechanism configured from DT doesn't work: requesting hog GPIO led1-high (chip r8a73a4_pfc, offset 28) failed The actual error code is -517 == -EPROBE_DEFER. The problem is that PFC+GPIO registration is handled in multiple steps: 1. pinctrl_register(), 2. gpiochip_add(), 3. gpiochip_add_pin_range(). Configuration of the hogs is handled in gpiochip_add(): gpiochip_add of_gpiochip_add of_gpiochip_scan_hogs gpiod_hog gpiochip_request_own_desc __gpiod_request chip->request pinctrl_request_gpio pinctrl_get_device_gpio_range However, at this point the GPIO controller hasn't been added to pinctrldev_list yet, so the range can't be found, and the operation fails with -EPROBE_DEFER. To fix this, add a "gpio-ranges" property to the gpio device node, so the ranges are added by of_gpiochip_add_pin_range(), which is called by of_gpiochip_add() before the call to of_gpiochip_scan_hogs(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-04ARM: dts: dra7: Add named interrupt property for dwc3Roger Quadros2-4/+24
Add interrupt names so that the same can be used for OTG easily. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-04ARM: dts: omap5: Add named interrupt property for dwc3Roger Quadros1-1/+6
Add interrupt names so that the same can be used for OTG easily. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-04ARM: dts: am4372: Add named interrupt property for dwc3Felipe Balbi1-2/+12
Add interrupt names so that the same can be used for OTG easily. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-03ARM: shmobile: silk: add eMMC DT supportSergei Shtylyov1-0/+25
Define the SILK board dependent part of the MMCIF device node (the board has eMMC chip) along with the necessary voltage regulator (note that the Vcc/Vccq regulator is dummy -- it's required by the MMCIF driver but doesn't actually exist on the board). Based on the original patch by Vladimir Barinov <vladimir.barinov@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-03ARM: shmobile: r8a7794: add MMCIF DT supportSergei Shtylyov1-0/+11
Define the generic R8A7794 part of the MMCIF0 device node. Based on the orginal patch by Shinobu Uehara <shinobu.uehara.xc@renesas.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-01ARM: dts: sun7i: Change cubietruck wifi enable pin to use mmc-pwrseqHans de Goede1-15/+12
The wifi-enable pin of the ap6210 module is not really a regulator, switch to the mmc-pwrseq framework for controlling it. This more accurately reflects how the hardware actually works. Signed-off-by: Hans de Goede <hdegoede@redhat.com> [maxime: Changed the name of the pinctrl node and re-ordered it] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31ARM: dts: sun5i: hsg-h702: Enable USB OTG controllerChen-Yu Tsai1-0/+38
This tablet has proper USB OTG support, using 3 GPIO pins for ID and VBUS detection, and also VBUS control. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31ARM: dts: sun5i: hsg-h702: Enable side volume buttons with LRADCChen-Yu Tsai1-0/+20
The tablet has volume up/down buttons on the side, connected to the LRADC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31ARM: dts: sun8i: Enable USB DRC on Ippo Q8H-A33 tabletHans de Goede1-0/+15
Enable the otg/drc usb controller on the Ippo Q8H-A33 tablet, for now it is enabled in host-only mode, because true OTG support requires support for detecting and enabling Vbus through the axp221 pmic. For this to work the Vbus on the port must be enabled by u-boot, or a powered hub must be used. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31ARM: dts: sun5i: Enable USB DRC on A13 OLinuxInoMark Janssen1-0/+37
Enable the otg/drc usb controller on the A13 OLinuxIno. Signed-off-by: Mark Janssen <mark@sig-io.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31ARM: dts: sun5i: Enable USB DRC on A10s OLinuxIno MicroHans de Goede1-1/+29
Enable the otg/drc usb controller on the A10s OLinuxIno Micro. Note the A10s OlinuxIno Micro always has some voltage on its otg power pin, even if the usb-vbus0-regulator is disabled, the leaked voltage is enough to make vbus-det always report 1, so we do not use vbus-det on this board. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31ARM: dts: sun4i: Enable USB DRC on A10 OLinuxIno LimeRemy van Elst1-0/+32
Enable the otg/drc usb controller on the A10 OLinuxIno Lime. Signed-off-by: Remy van Elst <relst@relst.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-07-31ARM: dts: am4372: Set the default clock rate for dpll_clksel_mac_clk clockKeerthy1-2/+5
cpsw needs the clock to be running at 50MHz in kernel. Hence setting the default rate. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-07-31ARM: dts: AM437X: add dpll_clksel_mac_clk nodeKeerthy2-0/+10
The patch adds the missing dpll_clksel_mac_clk clock node. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2015-07-31ARM: zynq: DT: Add zc702 pushbuttons to DT as gpio-keysEzra Savard1-0/+21
Adds the two MIO connected pushbuttons on the zc702 board to the devicetree as a single multi-key device for us with the gpio-keys driver. Signed-off-by: Ezra Savard <ezra.savard@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-31ARM: zynq: DT: Add missing interrupt for L2 pl310Alex Wilson1-0/+1
Add pl310 interrupt to the Zynq devicetree. Signed-off-by: Alex Wilson <alex.david.wilson@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-31Documentation: devicetree: Add ECC information to synopsys ddr controllerPunnaiah Choudary Kalluri1-0/+4
Add ECC information to synopsys ddr memory controller. Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-31ARM: dts: zynq: Add OCM nodeMichal Simek2-1/+8
Add OCM node for all zynq boards. OCM location can changed but for all current boards this is the location where OCM is.` Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-30ARM: at91/dt: add minimal sama5d2 Xplained boardNicolas Ferre2-0/+135
Add minimal support for the new sama5d2 Xplained board. Only USB, spi/i2c, ethernet and uart/usart peripherals added. With this DTS file you can boot the board and begin to play with it. Rootfs on NFS and sd card have successfully been tested. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-07-30ARM: at91/dt: add basic dtsi for sama5d2 SoCLudovic Desroches1-0/+925
Only the basic support for this new Atmel Cortex-A5 SoC. A subset of the peripherals is setup to allow booting. IRQ, clocks, USB, crypto, timers, rtc, ethernet, spi/i2c and uart/usart peripheral nodes are added. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-07-30ARM: at91/dt: sama5: update rstc to correct compatible stringJosh Wu2-2/+2
They'll use "atmel,sama5d3-rstc" for reset function. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> [nicolas.ferre@atmel.com: add the old compatible string as a fallback] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-07-30ARM: at91/dt: add isi & ov2640 dt nodes for at91sam9m10g45ek boardJosh Wu2-19/+76
First we group the isi data pins, and for now we only use 0~7 data pins with HSYNC and VSYNC. Also add the link for atmel-isi and ov2640 sensor node. Signed-off-by: Josh Wu <josh.wu@atmel.com> [nicolas.ferre@atmel.com: move the pinctrl properties in board .dts file] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-07-30ARM: shmobile: silk: add Ether DT supportSergei Shtylyov1-1/+27
Define the SILK board dependent part of the Ether device node. Enable DHCP and NFS root for the kernel booting. Based on the original patch by Vladimir Barinov <vladimir.barinov@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-07-30ARM: shmobile: silk: initial device treeSergei Shtylyov2-0/+52
Add the initial device tree for the R8A7794 SoC based SILK low cost board. SCIF2 serial port support is included, so that the serial console can work. Based on the original patch by Vladimir Barinov <vladimir.barinov@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-07-29ARM: shmobile: r8a7794: add PFC DT supportSergei Shtylyov1-0/+6
Define the generic R8A7794 part of the PFC device node. Based on original patch by Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-07-28ARM: dts: qs600: Add real regulators to sdccSrinivas Kandagatla1-0/+20
This patch adds real regulators to sdcc nodes. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-07-28ARM: dts: ifc6410: add real regulators for sdcc nodes.Srinivas Kandagatla1-0/+27
This patch adds real regulators for all the three sdcc nodes. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-07-28ARM: dts: apq8064: remove temporary fixed regulator for mmcSrinivas Kandagatla1-12/+0
This patch removes temporary fixed regluator use for mmc. Board files should use the regulators which are wiredup appropriately. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-07-28Merge tag 'socfpga_dts_for_v4.3' of ↵Olof Johansson8-11/+163
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt SoCFPGA DTS updates for v4.3 - Update clocking for DTS nodes - Add DTS board file for Terasic DE0 Atlas board - Use stdout-patch for chosen node - Enable prefetch-data and prefetch-instr * tag 'socfpga_dts_for_v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: dts: add osc1 as a possible parent for dbg_base_clk ARM: socfpga: dts: add missing clock gates to socfpga.dtsi ARM: socfpga: dts: Fix gpio dts entry for the correct clock ARM: socfpga: dts: Correct the parent clock for l3_sp_clk and dbg_clk ARM: dts: socfpga: Add support of Terasic DE0 Atlas board ARM: dts: socfpga: use stdout-path for chosen node ARM: dts: socfpga: enable the data and instruction prefetch for the l2 cache Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-28Merge tag 'v4.2-next-dts' of https://github.com/mbgg/linux-mediatek into next/dtOlof Johansson9-9/+411
- ARM: dts: mediatek: add mt6580 basic support - Document: DT: Add bindings for mediatek MT6580 SoC Platform - ARM: dts: mediatek mt8135: Use real UART clocks - ARM: dts: mt8135-evbp1: Add PMIC support - ARM: dts: mt8135: Add pmic wrapper nodes - ARM: dts: mediatek: Enable clock support for Mediatek MT8135. * tag 'v4.2-next-dts' of https://github.com/mbgg/linux-mediatek: ARM: dts: mediatek: add mt6580 basic support Document: DT: Add bindings for mediatek MT6580 SoC Platform ARM: dts: mediatek mt8135: Use real UART clocks ARM: dts: mt8135-evbp1: Add PMIC support ARM: dts: mt8135: Add pmic wrapper nodes ARM: dts: mediatek: Enable clock support for Mediatek MT8135. Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-28ARM: sunxi: dt: Convert users to the PIO interrupts bindingMaxime Ripard8-13/+8
The current DTs were setting the cell size to 2, but used the default xlate function that was assuming an interrupt cell size of 1, leading to the second part of the cell (the flags) being ignored, while we were having an inconsistent binding between the interrupts and gpio (that could also be used as interrupts). That "binding" doesn't work either with newer SoCs that have multiple irq banks. Now that we fixed the pinctrl driver to handle this like it should always have been handled, convert the DT users, and while we're at it, remove the size-cells property of PIO that is completely useless. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-28ARM: at91/dt: sama5d4: move ADC pinctrl to board device treesAlexandre Belloni3-9/+18
The ADC pinctrl is board specific, move it to the board device trees. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-07-28ARM: at91/dt: sama5d4: fix external trigger propertyAlexandre Belloni1-1/+1
The property is actually atmel,adc-use-external-triggers. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-07-28ARM: shmobile: r8a7791: Add JPU device node.Mikhail Ulyanov1-0/+7
This patch contains device tree node definition for JPEG codec peripheral found in the Renesas R-Car r8a7791 SoC. Signed-off-by: Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-07-28ARM: shmobile: r8a7790: Add JPU device node.Mikhail Ulyanov1-0/+7
This patch contains device tree node definition for JPEG codec peripheral found in the Renesas R-Car r8a7790 SoC. Signed-off-by: Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-07-28ARM: dts: apq8064: fix missing gsbi cell-indexSrinivas Kandagatla1-0/+1
Without this i2c instance for missing cell-index nodes would fail, fix it by adding correct cell-index. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-07-28ARM: dts: apq8064: Add DT support for GSBI6 and for UART pin muxPramod Gurav2-1/+42
This change adds DT support for GSBI6 and muxes the gpio pins as UART lines. Also defines a alias for serial port on these lines. Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> [Srinivas Kandagatla]: fix pinctrl location and rename alias correctly Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-07-28ARM: dts: apq8064: add pm8921 mpp supportSrinivas Kandagatla1-0/+12
This patch adds pmic pm8921 mpp gpio controller node. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-07-28ARM: dts: apq8064: Add pm8921 mfd and its gpio nodeSrinivas Kandagatla1-1/+35
This patch adds pmic gpio node to the device tree, this node is necessary for devices like wlan to control reset gpio. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-07-27ARM: dts: UniPhier: add UART and USB pinmux nodesMasahiro Yamada4-0/+131
The DT nodes in uniphier-pinctrl.dtsi provide the default pinctrl settings that would be suitable for most boards. You can still override them in your board DTS file if necessary. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-27ARM: dts: UniPhier: add pinctrl device nodesMasahiro Yamada3-0/+18
Add the pinctrol device nodes for UniPhier PH1-LD4, PH1-Pro4, and PH1-sLD8. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-27Merge tag 'omap-for-v4.3/dt-dm814x' of ↵Olof Johansson6-0/+529
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt omap dts changes for minimal dm814x support for v4.3 merge window. These changes make dm814x boot and adds minimal board support for dm814x-evm and hp t410. Note that to boot these depend on omap-for-v4.3/soc-signed branch, but as dm814x support is currently broken, these can be merged separately with the other dts changes. * tag 'omap-for-v4.3/dt-dm814x' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Add custom abort handler for t410 ARM: dts: Add minimal support for HP T410 ARM: dts: Add minimal dts support for dm8148-evm ARM: dts: Add minimal clocks for dm814x ARM: dts: Add minimal dm814x support Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 10:22:58 +0300