summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-05-04Merge branch 'remotes/lorenzo/pci/risc-v'Bjorn Helgaas13-1/+556
- sifive: Add pcie_aux clock to prci driver (Greentime Hu) - sifive: Use reset-simple in prci driver for PCIe (Greentime Hu) - Add SiFive FU740 PCIe host controller driver and DT binding (Paul Walmsley, Greentime Hu) * remotes/lorenzo/pci/risc-v: riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC PCI: fu740: Add SiFive FU740 PCIe host controller driver dt-bindings: PCI: Add SiFive FU740 PCIe host controller MAINTAINERS: Add maintainers for SiFive FU740 PCIe driver clk: sifive: Use reset-simple in prci driver for PCIe driver clk: sifive: Add pcie_aux clock in prci driver for PCIe driver
2021-05-04Merge branch 'remotes/lorenzo/pci/microchip'Bjorn Helgaas1-7/+5
- Make several microchip symbols static (Wei Yongjun) - Drop redundant dev_err() for platform_get_irq() errors (Krzysztof Wilczyński) * remotes/lorenzo/pci/microchip: PCI: microchip: Remove dev_err() when handing an error from platform_get_irq() PCI: microchip: Make some symbols static
2021-05-04Merge branch 'remotes/lorenzo/pci/mediatek'Bjorn Helgaas7-1/+1226
- Configure FC and FTS for functions other than 0 (Ryder Lee) - Add missing MODULE_DEVICE_TABLE (Qiheng Lin) - Add YAML schema for MediaTek (Jianjun Wang) - Export pci_pio_to_address() for module use (Jianjun Wang) - Add MediaTek MT8192 PCIe controller driver (Jianjun Wang) - Add MediaTek MT8192 INTx support (Jianjun Wang) - Add MediaTek MT8192 MSI support (Jianjun Wang) - Add MediaTek MT8192 system power management support (Jianjun Wang) * remotes/lorenzo/pci/mediatek: MAINTAINERS: Add Jianjun Wang as MediaTek PCI co-maintainer PCI: mediatek-gen3: Add system PM support PCI: mediatek-gen3: Add MSI support PCI: mediatek-gen3: Add INTx support PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192 PCI: Export pci_pio_to_address() for module use dt-bindings: PCI: mediatek-gen3: Add YAML schema PCI: mediatek: Add missing MODULE_DEVICE_TABLE PCI: mediatek: Configure FC and FTS for functions other than 0
2021-05-04Merge branch 'remotes/lorenzo/pci/layerscape'Bjorn Helgaas1-1/+1
- Fix ls_pcie_ep_probe() syntax error (comma for semicolon) (Krzysztof Wilczyński) * remotes/lorenzo/pci/layerscape: PCI: layerscape: Correct syntax by changing comma to semicolon
2021-05-04Merge branch 'remotes/lorenzo/pci/iproc'Bjorn Helgaas1-1/+1
- Return zero for success of iproc_msi_irq_domain_alloc() (Pali Rohár) * remotes/lorenzo/pci/iproc: PCI: iproc: Fix return value of iproc_msi_irq_domain_alloc()
2021-05-04Merge branch 'remotes/lorenzo/pci/endpoint'Bjorn Helgaas2-8/+14
- Fix NULL pointer dereference when epc_features not implemented (Shradha Todi) - Remove redundant initialization (Colin Ian King) - Add missing destroy_workqueue() in endpoint test (Yang Yingliang) * remotes/lorenzo/pci/endpoint: PCI: endpoint: Fix missing destroy_workqueue() PCI: endpoint: Remove redundant initialization of pointer dev PCI: endpoint: Fix NULL pointer dereference for ->get_features()
2021-05-04Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas6-10/+16
- Use generic config accessors for TI AM65x (K3) to fix regression (Kishon Vijay Abraham I) - Move MSI Receiver init to dw_pcie_host_init() so it is re-initialized along with the RC in resume (Jisheng Zhang) - Remove unused pcie_app_rd() (Jiapeng Chong) - Move iATU detection earlier to fix regression (Hou Zhiqiang) * remotes/lorenzo/pci/dwc: PCI: dwc: Move iATU detection earlier PCI: dwc/intel-gw: Remove unused function PCI: dwc: Move dw_pcie_msi_init() to dw_pcie_setup_rc() PCI: keystone: Let AM65 use the pci_ops defined in pcie-designware-host.c
2021-05-04Merge branch 'remotes/lorenzo/pci/cadence'Bjorn Helgaas3-11/+40
- Add DT binding and TI j721e support for refclk to PCIe connector (Kishon Vijay Abraham I) - Add host mode and endpoint mode DT bindings for TI AM64 SoC (Kishon Vijay Abraham I) * remotes/lorenzo/pci/cadence: PCI: j721e: Add support to provide refclk to PCIe connector dt-bindings: PCI: ti,j721e: Add endpoint mode dt-bindings for TI's AM64 SoC dt-bindings: PCI: ti,j721e: Add host mode dt-bindings for TI's AM64 SoC dt-bindings: PCI: ti,j721e: Add binding to represent refclk to the connector
2021-05-04Merge branch 'remotes/lorenzo/pci/brcmstb'Bjorn Helgaas1-0/+1
- Fix brcm_pcie_probe() error return for unsupported revision (Wei Yongjun) * remotes/lorenzo/pci/brcmstb: PCI: brcmstb: Fix error return code in brcm_pcie_probe()
2021-05-04Merge branch 'remotes/lorenzo/pci/altera-msi'Bjorn Helgaas1-3/+1
- Remove redundant dev_err() for devm_ioremap_resource() failure (Chen Hui) * remotes/lorenzo/pci/altera-msi: PCI: altera-msi: Remove redundant dev_err call in altera_msi_probe()
2021-05-04Merge branch 'pci/misc'Bjorn Helgaas8-12/+28
- Fix compile testing of al driver without CONFIG_PCI_ECAM (Arnd Bergmann) - Fix compile testing of thunder drivers (Arnd Bergmann) - Fix "no symbols" warnings when compile testing al, thunder driver with CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann) - Remove unused MicroGate SyncLink device IDs (Jiri Slaby) - Remove unused alloc_pci_root_info() return value (Krzysztof Wilczyński) * pci/misc: x86/PCI: Remove unused alloc_pci_root_info() return value PCI: Remove MicroGate SyncLink device IDs PCI: Avoid building empty drivers PCI: thunder: Fix compile testing PCI: al: Select CONFIG_PCI_ECAM
2021-05-04Merge branch 'pci/virtualization'Bjorn Helgaas1-0/+1
- Increase delay after FLR to work around Intel DC P4510 NVMe erratum (Raphael Norwitz) * pci/virtualization: PCI: Delay after FLR of Intel DC P4510 NVMe
2021-05-04Merge branch 'pci/kernel-doc'Bjorn Helgaas10-20/+47
- Fix kernel-doc warnings (Krzysztof Wilczyński) * pci/kernel-doc: PCI: Fix kernel-doc errors
2021-05-04Merge branch 'pci/sysfs'Bjorn Helgaas6-349/+206
- Convert sysfs "config", "rom", "reset", "label", "index", "acpi_index" to static attributes to fix races in device enumeration (Krzysztof Wilczyński) - Convert sysfs "vpd" to static attribute (Heiner Kallweit, Krzysztof Wilczyński) - Use sysfs_emit() in "show" functions (Krzysztof Wilczyński) * pci/sysfs: PCI/sysfs: Use sysfs_emit() and sysfs_emit_at() in "show" functions PCI/sysfs: Rearrange smbios_attr_group and acpi_attr_group PCI/sysfs: Tidy SMBIOS & ACPI label attributes PCI/sysfs: Convert "index", "acpi_index", "label" to static attributes PCI/sysfs: Define SMBIOS label attributes with DEVICE_ATTR*() PCI/sysfs: Define ACPI label attributes with DEVICE_ATTR*() PCI/sysfs: Rename device_has_dsm() to device_has_acpi_name() PCI/sysfs: Convert "vpd" to static attribute PCI/sysfs: Rename "vpd" attribute accessors PCI/sysfs: Convert "reset" to static attribute PCI/sysfs: Convert "rom" to static attribute PCI/sysfs: Convert "config" to static attribute
2021-05-04Merge branch 'pci/vpd'Bjorn Helgaas11-155/+45
- Remove obsolete Broadcom NIC VPD length-limiting quirk (Heiner Kallweit) - Remove sysfs VPD size checking dead code (Heiner Kallweit) - Convert VPF sysfs file to static attribute (Heiner Kallweit) - Remove unnecessary pci_set_vpd_size() (Heiner Kallweit) - Tone down "missing VPD" message (Heiner Kallweit) * pci/vpd: PCI: Allow VPD access for QLogic ISP2722 PCI/VPD: Add helper pci_get_func0_dev() PCI/VPD: Remove pci_vpd_find_tag() SRDT handling PCI/VPD: Remove pci_vpd_find_tag() 'offset' argument PCI/VPD: Change pci_vpd_init() return type to void PCI/VPD: Make missing VPD message less alarming PCI/VPD: Remove pci_set_vpd_size() PCI/VPD: Remove sysfs accessor size checking dead code PCI/VPD: Remove obsolete Broadcom NIC quirk
2021-05-04Merge branch 'pci/pm'Bjorn Helgaas1-1/+1
- Fix acpi_pci_set_power_state() debug message (Rafael J. Wysocki) * pci/pm: PCI/ACPI: Fix acpi_pci_set_power_state() debug message
2021-05-04Merge branch 'pci/hotplug'Bjorn Helgaas4-11/+3
- Fix acpiphp reference count leak (Feilong Lin) * pci/hotplug: PCI: acpiphp: Fix whitespace issue PCI: shpchp: Remove unused shpc_writeb() PCI: cpqphp: Use DEFINE_SPINLOCK() for int15_lock ACPI / hotplug / PCI: Fix reference count leak in enable_slot()
2021-05-04Merge branch 'pci/error'Bjorn Helgaas1-1/+1
- Fix RCiEP device to RCEC association (Qiuxu Zhuo) * pci/error: PCI/RCEC: Fix RCiEP device to RCEC association
2021-05-04Merge branch 'pci/enumeration'Bjorn Helgaas6-27/+27
- Release OF node when pci_scan_device() fails (Dmitry Baryshkov) - Add pci_disable_parity() (Bjorn Helgaas) - Disable Mellanox Tavor parity reporting (Heiner Kallweit) - Disable N2100 r8169 parity reporting (Heiner Kallweit) * pci/enumeration: ARM: iop32x: disable N2100 PCI parity reporting IB/mthca: Disable parity reporting PCI: Add pci_disable_parity() PCI: Release OF node in pci_scan_device()'s error path
2021-05-04riscv: dts: Add PCIe support for the SiFive FU740-C000 SoCGreentime Hu1-0/+33
Link: https://lore.kernel.org/r/20210504105940.100004-7-greentime.hu@sifive.com Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-05-04PCI: fu740: Add SiFive FU740 PCIe host controller driverPaul Walmsley3-0/+319
Add driver for the SiFive FU740 PCIe host controller. This controller is based on the DesignWare PCIe core. Co-developed-by: Henry Styles <hes@sifive.com> Co-developed-by: Erik Danie <erik.danie@sifive.com> Co-developed-by: Greentime Hu <greentime.hu@sifive.com> Link: https://lore.kernel.org/r/20210504105940.100004-6-greentime.hu@sifive.com Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Henry Styles <hes@sifive.com> Signed-off-by: Erik Danie <erik.danie@sifive.com> Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-05-04dt-bindings: PCI: Add SiFive FU740 PCIe host controllerGreentime Hu1-0/+113
Add PCIe host controller DT bindings of SiFive FU740. Link: https://lore.kernel.org/r/20210504105940.100004-5-greentime.hu@sifive.com Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2021-05-04MAINTAINERS: Add maintainers for SiFive FU740 PCIe driverGreentime Hu1-0/+8
Here add maintainer information for SiFive FU740 PCIe driver. Link: https://lore.kernel.org/r/20210504105940.100004-4-greentime.hu@sifive.com Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-05-04clk: sifive: Use reset-simple in prci driver for PCIe driverGreentime Hu4-0/+20
We use reset-simple in this patch so that pcie driver can use devm_reset_control_get() to get this reset data structure and use reset_control_deassert() to deassert pcie_power_up_rst_n. Link: https://lore.kernel.org/r/20210504105940.100004-3-greentime.hu@sifive.com Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Stephen Boyd <sboyd@kernel.org>
2021-05-04clk: sifive: Add pcie_aux clock in prci driver for PCIe driverGreentime Hu5-1/+63
We add pcie_aux clock in this patch so that pcie driver can use clk_prepare_enable() and clk_disable_unprepare() to enable and disable pcie_aux clock. Link: https://lore.kernel.org/r/20210504105940.100004-2-greentime.hu@sifive.com Signed-off-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Stephen Boyd <sboyd@kernel.org>
2021-04-30PCI: Allow VPD access for QLogic ISP2722Arun Easi1-1/+0
0d5370d1d852 ("PCI: Prevent VPD access for QLogic ISP2722") disabled access to VPD of the ISP2722-based 16/32Gb Fibre Channel to PCIe Adapter because reading past the end of the VPD caused NMIs. 104daa71b396 ("PCI: Determine actual VPD size on first access") limits reads to the actual size of VPD, which should prevent these NMIs. 104daa71b396 was merged *before* 0d5370d1d852, but we think the testing that prompted 0d5370d1d852 ("PCI: Prevent VPD access for QLogic ISP2722") was done with a kernel that lacked 104daa71b396. See [1, 2]. Remove the quirk added by 0d5370d1d852 ("PCI: Prevent VPD access for QLogic ISP2722") so customers can read the HBA VPD. [1] https://lore.kernel.org/linux-pci/alpine.LRH.2.21.9999.2012161641230.28924@irv1user01.caveonetworks.com/ [2] https://lore.kernel.org/linux-pci/alpine.LRH.2.21.9999.2104071535110.13940@irv1user01.caveonetworks.com/ [bhelgaas: commit log] Link: https://lore.kernel.org/r/20210409215153.16569-2-aeasi@marvell.com Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v4.6+
2021-04-30PCI/VPD: Add helper pci_get_func0_dev()Heiner Kallweit1-5/+8
Factor out the "get function 0" logic into pci_get_func0_dev(). [bhelgaas: keep PCI_DEVFN(PCI_SLOT()) instead of exposing implementation details, commit log] Link: https://lore.kernel.org/r/75d1f619-8a35-690d-8fc8-e851264a4bbb@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-30PCI/VPD: Remove pci_vpd_find_tag() SRDT handlingHeiner Kallweit1-25/+6
Only SRDT tag is the end tag, and no caller is interested in it. This allows to remove all SRDT tag handling. Link: https://lore.kernel.org/r/3f63f06f-734f-8fff-9518-27fe1faf903d@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-30PCI/VPD: Remove pci_vpd_find_tag() 'offset' argumentHeiner Kallweit10-15/+12
All callers pass 0 as offset. Therefore remove the parameter and use a fixed offset 0 in pci_vpd_find_tag(). Link: https://lore.kernel.org/r/f62e6e19-5423-2ead-b2bd-62844b23ef8f@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-30PCI/VPD: Change pci_vpd_init() return type to voidHeiner Kallweit2-5/+4
pci_init_capabilities() is the only caller and doesn't use the return value. So let's change the return type to void. Link: https://lore.kernel.org/r/663ec440-8375-1459-ddb4-98ea76e75917@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-30PCI/VPD: Make missing VPD message less alarmingHeiner Kallweit1-2/+6
Realtek RTL8169/8168/8125 NIC families indicate VPD capability and an optional VPD EEPROM can be connected via I2C/SPI. However I haven't seen any card or system with such a VPD EEPROM yet. The missing EEPROM causes the following warning whenever e.g. lscpi -vv is executed. invalid short VPD tag 00 at offset 01 The warning confuses users, and I think we should handle the situation more gently. Therefore, if first VPD byte is read as 0x00, assume a missing optional VPD PROM and replace the warning with a more descriptive message at info level. [bhelgaas: fix pre-existing whitespace] Link: https://lore.kernel.org/r/ccbc11f1-4dbb-e2c8-d0ea-559e06d4c340@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-30PCI/VPD: Remove pci_set_vpd_size()Heiner Kallweit2-46/+13
24a1720a0841 ("cxgb4: collect serial config version from register") removed the only usage of pci_set_vpd_size(). If a device needs to override the auto-detected VPD size, then this can be done with a PCI quirk, as is done for Chelsio devices. There's no need to allow drivers to change the VPD size. Remove pci_set_vpd_size(). [bhelgaas: squash in Arnd's fix for "'pci_vpd_set_size' defined but not used" from https://lore.kernel.org/r/20210421140334.3847155-1-arnd@kernel.org] Link: https://lore.kernel.org/r/47d86e52-9bcf-7da7-1edb-0d988a7a82ab@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-04-30x86/PCI: Remove unused alloc_pci_root_info() return valueKrzysztof Wilczyński1-1/+1
The "info" value returned from alloc_pci_root_info() is never used, so drop it. [bhelgaas: commit log] Addresses-Coverity-ID: 1222153 ("Unused value") Link: https://lore.kernel.org/r/20210420210913.1137116-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-29MAINTAINERS: Add Jianjun Wang as MediaTek PCI co-maintainerJianjun Wang1-0/+1
Update entry for MediaTek PCIe controller, add Jianjun Wang as MediaTek PCI co-maintainer. Link: https://lore.kernel.org/r/20210420061723.989-8-jianjun.wang@mediatek.com Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
2021-04-29PCI: mediatek-gen3: Add system PM supportJianjun Wang1-0/+113
Add suspend_noirq and resume_noirq callback functions to implement PM system suspend and resume hooks for the MediaTek Gen3 PCIe controller. When the system suspends, trigger the PCIe link to enter the L2 state and pull down the PERST# pin, gating the clocks of the MAC layer, and then power-off the physical layer to provide power-saving. When the system resumes, the PCIe link should be re-established and the related control register values should be restored. Link: https://lore.kernel.org/r/20210420061723.989-7-jianjun.wang@mediatek.com Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
2021-04-29PCI: mediatek-gen3: Add MSI supportJianjun Wang1-0/+276
Add MSI support for MediaTek Gen3 PCIe controller. This PCIe controller supports up to 256 MSI vectors, the MSI hardware block diagram is as follows: +-----+ | GIC | +-----+ ^ | port->irq | +-+-+-+-+-+-+-+-+ |0|1|2|3|4|5|6|7| (PCIe intc) +-+-+-+-+-+-+-+-+ ^ ^ ^ | | ... | +-------+ +------+ +-----------+ | | | +-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+ |0|1|...|30|31| |0|1|...|30|31| |0|1|...|30|31| (MSI sets) +-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ | | | | | | | | | | | | (MSI vectors) | | | | | | | | | | | | (MSI SET0) (MSI SET1) ... (MSI SET7) With 256 MSI vectors supported, the MSI vectors are composed of 8 sets, each set has its own address for MSI message, and supports 32 MSI vectors to generate interrupt. Link: https://lore.kernel.org/r/20210420061723.989-6-jianjun.wang@mediatek.com Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
2021-04-29PCI: mediatek-gen3: Add INTx supportJianjun Wang1-0/+172
Add INTx support for MediaTek Gen3 PCIe controller. Link: https://lore.kernel.org/r/20210420061723.989-5-jianjun.wang@mediatek.com Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
2021-04-29PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192Jianjun Wang3-0/+480
MediaTek's PCIe host controller has three generation HWs, the new generation HW is an individual bridge, it supports Gen3 speed and compatible with Gen2, Gen1 speed. Add support for new Gen3 controller which can be found on MT8192. Link: https://lore.kernel.org/r/20210420061723.989-4-jianjun.wang@mediatek.com Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com>
2021-04-29PCI: dwc: Move iATU detection earlierHou Zhiqiang4-3/+12
dw_pcie_ep_init() depends on the detected iATU region numbers to allocate the in/outbound window management bitmap. It fails after 281f1f99cf3a ("PCI: dwc: Detect number of iATU windows"). Move the iATU region detection into a new function, move the detection to the very beginning of dw_pcie_host_init() and dw_pcie_ep_init(). Also remove it from the dw_pcie_setup(), since it's more like a software initialization step than hardware setup. Link: https://lore.kernel.org/r/20210125044803.4310-1-Zhiqiang.Hou@nxp.com Link: https://lore.kernel.org/linux-pci/20210407131255.702054-1-dmitry.baryshkov@linaro.org Link: https://lore.kernel.org/r/20210413142219.2301430-1-dmitry.baryshkov@linaro.org Fixes: 281f1f99cf3a ("PCI: dwc: Detect number of iATU windows") Tested-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [DB: moved dw_pcie_iatu_detect to happen after host_init callback] Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: stable@vger.kernel.org # v5.11+ Cc: Marek Szyprowski <m.szyprowski@samsung.com>
2021-04-29PCI: dwc/intel-gw: Remove unused functionJiapeng Chong1-5/+0
Fix the following clang warning: drivers/pci/controller/dwc/pcie-intel-gw.c:84:19: warning: unused function 'pcie_app_rd' [-Wunused-function]. Link: https://lore.kernel.org/r/1618475577-99198-1-git-send-email-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-04-29PCI: dwc: Move dw_pcie_msi_init() to dw_pcie_setup_rc()Jisheng Zhang1-1/+2
If the host which makes use of IP's integrated MSI Receiver losts power during suspend, we need to reinit the RC and MSI Receiver in resume. But after we move dw_pcie_msi_init() into the core, we have no API to do so. Usually the dwc users need to call dw_pcie_setup_rc() to reinit the RC, we can solve this problem by moving dw_pcie_msi_init() to dw_pcie_setup_rc(). Link: https://lore.kernel.org/r/20210325152604.6e79deba@xhacker.debian Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2021-04-29PCI/sysfs: Use sysfs_emit() and sysfs_emit_at() in "show" functionsKrzysztof Wilczyński2-42/+40
The sysfs_emit() and sysfs_emit_at() functions were introduced to make it less ambiguous which function is preferred when writing to the output buffer in a device attribute's "show" callback [1]. Convert the PCI sysfs object "show" functions from sprintf(), snprintf() and scnprintf() to sysfs_emit() and sysfs_emit_at() accordingly, as the latter is aware of the PAGE_SIZE buffer and correctly returns the number of bytes written into the buffer. No functional change intended. [1] Documentation/filesystems/sysfs.rst [bhelgaas: drop dsm_label_utf16s_to_utf8s(), link speed/width changes] Link: https://lore.kernel.org/r/20210416205856.3234481-10-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-29PCI/sysfs: Rearrange smbios_attr_group and acpi_attr_groupKrzysztof Wilczyński1-26/+26
Collect the smbios_attr_group and acpi_attr_group together in the logical order. No functional change intended. [bhelgaas: split to separate patch] Link: https://lore.kernel.org/r/20210416205856.3234481-6-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-29PCI/sysfs: Tidy SMBIOS & ACPI label attributesKrzysztof Wilczyński1-23/+10
Update coding style to reduce distraction. No functional change intended. [bhelgaas: split to separate patch] Link: https://lore.kernel.org/r/20210416205856.3234481-6-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-29PCI/sysfs: Convert "index", "acpi_index", "label" to static attributesKrzysztof Wilczyński3-77/+16
The "label", "index", and "acpi_index" sysfs attributes show firmware label information about the device. If the ACPI Device Name _DSM is implemented for the device, we have: label Device name (optional, may be null) acpi_index Instance number (unique under \_SB scope) When there is no ACPI _DSM and SMBIOS provides an Onboard Devices structure for the device, we have: label Reference Designation, e.g., a silkscreen label index Device Type Instance Previously these attributes were dynamically created either by pci_bus_add_device() or the pci_sysfs_init() initcall, but since they don't need to be created or removed dynamically, we can use a static attribute so the device model takes care of addition and removal automatically. Convert "label", "index", and "acpi_index" to static attributes. Presence of the ACPI _DSM (device_has_acpi_name()) determines whether the ACPI information (label, acpi_index) or the SMBIOS information (label, index) is visible. [bhelgaas: commit log, split to separate patch, add "pci_dev_" prefix] Suggested-by: Oliver O'Halloran <oohall@gmail.com> Link: https://lore.kernel.org/r/20210416205856.3234481-6-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-29PCI/sysfs: Define SMBIOS label attributes with DEVICE_ATTR*()Krzysztof Wilczyński1-23/+18
Use DEVICE_ATTR*() to simplify definition of the SMBIOS label attributes. No functional change intended. Note that dev_attr_smbios_label requires __ATTR() because the "label" attribute can be exposed via either ACPI or SMBIOS, and we already have the ACPI label_show() function in this file. [bhelgaas: split to separate patch] Link: https://lore.kernel.org/r/20210416205856.3234481-6-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-29PCI/sysfs: Define ACPI label attributes with DEVICE_ATTR*()Krzysztof Wilczyński1-23/+15
Use DEVICE_ATTR*() to simplify definitions of the ACPI label attributes. No functional change intended. [bhelgaas: split to separate patch] Link: https://lore.kernel.org/r/20210416205856.3234481-6-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-29PCI/sysfs: Rename device_has_dsm() to device_has_acpi_name()Krzysztof Wilczyński1-20/+19
Rename device_has_dsm() to device_has_acpi_name() to better reflect its purpose and move it earlier so it's available for a future SMBIOS .is_visible() function. No functional change intended. [bhelgaas: split to separate patch] Link: https://lore.kernel.org/r/20210416205856.3234481-6-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-29PCI/sysfs: Convert "vpd" to static attributeKrzysztof Wilczyński3-46/+18
The "vpd" sysfs attribute allows access to Vital Product Data (VPD). Previously it was dynamically created either by pci_bus_add_device() or the pci_sysfs_init() initcall, but since it doesn't need to be created or removed dynamically, we can use a static attribute so the device model takes care of addition and removal automatically. Convert "vpd" to a static attribute and use the .is_bin_visible() callback to check whether the device supports VPD. Remove pcie_vpd_create_sysfs_dev_files(), pcie_vpd_remove_sysfs_dev_files(), pci_create_capabilities_sysfs(), and pci_create_capabilities_sysfs(), which are no longer needed. [bhelgaas: This is substantially the same as the earlier patch from Heiner Kallweit <hkallweit1@gmail.com>. I included Krzysztof's change here so all the "convert to static attribute" changes are together.] [bhelgaas: rename to vpd_read()/vpd_write() and pci_dev_vpd_attr_group] Suggested-by: Oliver O'Halloran <oohall@gmail.com> Based-on: https://lore.kernel.org/r/7703024f-8882-9eec-a122-599871728a89@gmail.com Based-on-patch-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20210416205856.3234481-5-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-29PCI/sysfs: Rename "vpd" attribute accessorsBjorn Helgaas1-8/+8
Rename "vpd" attribute accessors so they fit with the BIN_ATTR_RW() macro usage. Currently there is no BIN_ATTR_ADMIN_RW() that uses 0600 permissions, but if there were, it would likely use "vpd_read()" and "vpd_write()". No functional change intended. Extracted from the patch mentioned below by Heiner Kallweit <hkallweit1@gmail.com>. Link: https://lore.kernel.org/linux-pci/7703024f-8882-9eec-a122-599871728a89@gmail.com/ Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-15 04:13:29 +0300